LIGHTING - Harley Davidson Shop

D
LIGHTING 649
Decorative LED Lighting
D. ILLUMINATED FAIRING ACCENT TRIM*
Sweeping chrome trim dresses the Electra Glide ® fairing for
a distinctive, yet functional look. Smoked lenses hide amber
LED lamps that glow as running lamps when the ignition is
on, and function as auxiliary directional indicators when the
turn signals are activated. Fairing Accent Trim looks great by
itself, and is styled to complement the available Illuminated
Windshield Trim and Illuminated Mirrors. The wiring is
concealed inside the fairing for a clean, custom appearance.
Complete kit includes all necessary installation hardware. Trim
may cover pinstripes or two-tone paint lines on some vehicles.
Check appearance prior to installation.
69290-09
Fits ’97-later Electra Glide ® , Street Glide ® models.
D. ILLUMINATED FAIRING ACCENT TRIM (SHOWN WITH LED WINDSHIELD MOLDING)
Shown with:
ILLUMINATED LED WINDSHIELD MOLDING KIT*
Smoked lenses hide bands of four amber LED lamps that glow
as running lamps when the ignition is on, and the two outer
clusters function as auxiliary directional indicators when the
turn signals are activated. The wiring is concealed inside the
fairing for a clean, custom appearance. Complete kit includes
all necessary mounting hardware.
57335-08
Fits ’97-later Electra Glide ® , Street Glide ® models.
E. LIGHTED FORK SLIDER COVERS
E
F
E. LIGHTED FORK SLIDER COVERS*
Highlighted by a triple row of amber running lights, these
fork slider covers are the perfect complement to the Chrome
Caliper Rotor Covers. Includes all necessary mounting brackets
and hardware, wiring harness, and instructions.
46732-00
Fits ’00-’07 Touring models with Caliper Rotor Cover Kit
P/N 42230-00. Does not fit with Chrome Wind Deflectors
P/N 58121-85B.
F. ELECTRA GLO LIGHT RAILS*
Molded housings incorporate wave-soldered circuit boards
with tungsten filament bulbs for enhanced illumination.
Precision-molded Lexan ® polycarbonate lenses lined with
light-diffusing panels offer consistent, even light dispersion.
Assembled and wired for bolt-on and plug-in installation. Kit
includes bracketry, hardware and instructions.
68682-09
Fits ’09-later Road King ® and Electra Glide ® models
equipped with hard saddlebags. Installation on models not
factory-equipped with saddlebag guards requires separate
purchase of Saddlebag Guard Rail Kit P/N 90892-09.
90531-93
Fits ’94-’08 FLTCU, FLHTCU and FLHTC. Will not fit ’06-’08
FLHX models.
NOTE: Installation on ’93 FLHS and ’94-’96 FLHR models
requires Saddlebag Guard Kit P/N 90839-93A, installation on
’97-later FLHT and FLHR (except ’98-later FLHRC and FLHRS)
models requires Saddlebag Guard Kit P/N 91216-97. Must be
purchased separately. To install on ’93-’96 models equipped
with accessory Triple Saddlebag Rail Kit P/N 90845-93A, Left
and Right Outer Guard Rail Clamps P/N 90919-93 and
P/N 90917-93 are required and must be purchased separately.
F. ELECTRA GLO LIGHT RAILS
*NOTE: It is possible to overload your motorcycle’s charging
system by adding too many electrical accessories. If your
combined electrical accessories operating at any one time
consume more electrical current than your vehicle’s charging
system can produce, the electrical consumption can
discharge the battery and cause vehicle electrical system
damage. Ask your dealer for advice about the amount of
current consumed by additional electrical accessories.