LIGHTING - Harley Davidson Shop

C. FRAMED LAYBACK LICENSE PLATE MOUNT –
TOURING
C
D
C. FRAMED LAYBACK LICENSE PLATE MOUNT –
FENDER TOP
C
D
LIGHTING 653
License Plate Mounts
C. FRAMED LAYBACK LICENSE PLATE MOUNT
Wrap your license plate in chrome. This mirror-finish license
mount tips the plate back for a sleek appearance, and
conceals the mounting hardware for a custom look. The front
frame covers the license holes, and the mirror-smooth back
plate hides the unfinished rear of the plate. Kit accepts plates
measuring to 7-1/4" x 4-1/4" (184 x 108mm). Kit includes
installation hardware and rear fender reflector.
60193-07 Fender Top.
Fits license plate up to 7-1/4" x 4-1/4". Fits models with a
three-hole rear fender mount license plate bracket. (Does not
fit XL883N, XL1200N, XL1200X, FLSTS, FXCW, FXCWC,
FXDS-CONV., FXDXT, ’09-later FXDB, ’10 FXDWG, ’00-’01
FXDX, Touring, VRSC models or models with a Bobtail Rear
Fender.) (Check for clearance before installing with rear
fender rack.)
60210-07 Touring.
Fits ’99-’08 Road King ® and Electra Glide ® Standard models
with 7-1/4" x 4-1/4" license plate.
D. LAYBACK LICENSE PLATE MOUNT
Showcase your laid-back attitude by replacing the stand-up
license plate mount. Chrome-plated die-cast mount tips the
license plate back for a low-profile style. Kit accepts plates
measuring to 7-1/4" x 4-1/4" (184 x 108mm). Kit includes
chrome-plated license mounting hardware, installation hardware,
and rear fender reflector.
60280-07 Fender Top.
Fits license plate up to 7-1/4" x 4-1/4". Fits models with a
three-hole rear fender mount license plate bracket. (Does not
fit XL883N, XL1200N, XL1200X, FLSTS, FXCW, FXCWC,
FXDS-CONV., FXDXT, ’09-later FXDB, ’10 FXDWG, ’00-’01
FXDX, Touring, VRSC models or models with a Bobtail Rear
Fender.) (Check for clearance before installing with rear
fender rack.)
60277-07 Touring.
Fits ’99-’08 Road King ® and Electra Glide ® Standard models
with 7-1/4" x 4-1/4" license plate.
E. LAYBACK LICENSE PLATE AND TURN SIGNAL
RELOCATION KIT
This kit combines our popular Layback License Plate Mount
with an integrated turn signal bar to add a stylish slant to the
rear fender. Kit relocates the Original Equipment bullet-style
turn signals from the fender strut to the turn signal bar to
allow clearance for saddlebags. This kit is a stylish alternative
to Turn Signal Relocation Kit P/N 68732-02A, and includes all
necessary mounting hardware.
60215-06
Fits ’04-later XL models (except XL883N, XL1200N and
XL1200X) and ’02-later Dyna ® models (except FXDWG, FXDF
and ’09-later FXDB).
D. LAYBACK LICENSE PLATE MOUNT –
FENDER TOP
D. LAYBACK LICENSE PLATE MOUNT –
TOURING
E
E. LAYBACK LICENSE PLATE AND TURN SIGNAL RELOCATION KIT