Urma - Command Tooling Systems

MicroMax Boring
System Features
MicroMax Boring System:
MicroMax adjusts accurately with minimal backlash—Allowing you to balance precisely for each specific diameter. The
result is improved bore concentricity, roundness, surface finish, and improved tool life.
Micro-adjustable balanceable and non-balanceable boring heads—Accurate adjustment with graduations of .0001”
(.0025) to adjust down to .0002” on diameter up to 20,000 RPM.
MicroMax balanceable boring head allows our boring bars to cover a wide range—You bore precise, round holes
vibration-free at recommended cutting speeds. With this balanced system, you can reach recommended cutting speeds
without typical out-of-roundness and vibration problems. Inserts easily shear the material from the bore wall at the
appropriate cutting speeds.
Industry standard indexable inserts used in all Urma tools—This means you can benefit from leading edge carbide grades
and geometries for best performance and cost.
Two distinct connections—Alpha Modul and Beta Modul® share the same advantages, creating the most rigid and versatile
modular boring system available.
Beta Modul® is interchangeable with other systems—This quick-change adaption is interchangeable with other systems,
offering increased flexibility in converting to the Urma program.
Taper tolerance and balance that exceeds industry standards—Provides less vibration and better repeatability. A variety of
industry standard tapers manufactured to Command’s Mass Symmetry design.
Complete assemblies provided—All items include insert screws, cartridge screws, lock screws, and wrenches required for
adjustments and securing inserts.
All tooling coolant through—All individual tools and assemblies are coolant through unless noted.
Ask about our Tool Trial Program!—Try Command/Urma boring tools in your shop and we guarantee your toughest
operation will become your most productive!
800.328.2197800.555.7694support@commandtool.comwww.commandtool.com
12