PRODUCT CATALOGUE Material flow systems for machine tools

More documents

Recommendations

Info

turbo SL 80 The FMB SL80 (SL 80 S) is a automatic Bar Loading Magazine for processing bars in the diameter range of 10 - 80 mm and in lengths up to 1200 mm or 1500 mm on machine tools. Free of noise and vibration While processing the bar there is no contact between the material bar and the loading magazine, so whether the bar is round, square or hexagonal a processing is possible with an optimal spindle reduction without any problems. Minimum space requirement The compact design of the SL 80 loading magazines results in the minimum amount of floor space being used. Side loading The storage capacity is 530 mm deep. The inclination of the storage table is adjusted. Loading to the automatic lathe The material bar is loaded into the lathe spindle and is guided there. Spindle liners are necessary to accommodate different bar diameters. Length of the material bars Material bars with maximum lengths of 1200 and 1500 mm can be loaded. However, the maximum length depends on the spindle length of the automatic lathe. Adjustment of the bar diameter By means of a handwheel an easy and quick central adjustment reduces the change-over time to different bar diameters to a minimum. Moving device The loading magazine FMB SL 80 / SL 80 S is equipped with a moving device which makes an easy movement of the loading magazine possible. So the spindle liners of the main spindle can be changed easily. The material bar is loaded into the main spindle of the automatic lathe by a pneumatic feed mechanism. The feed force and the feed rate are adjustable by pneumatic valves. Minimum maintenance Easy to operate by removable userfriendly control panel. 14
Single spindle lathe LINE Individual solutions for the loading and unloading of bars and unusual bar sections SL 80 SL 80 S turbo SL 80 S The material bar is loaded into the main spindle of the automatic lathe by a linear feed mechanism with toothed belt and servomotor. This drive allows the feeding of the material bar to a precise position. Extensive options of control guarantee the interaction between the loading magazine and the automatic lathe. All parameters are shown on the clear text display. Technical data at page 27 Operation mode of the FMB bar load magazine page 21 The FMB bar feed channel page 21 15
Page 1 and 2: PRODUCT CATALOGUE Material flow sys
Page 3 and 4: The FMB Service-Hotline So that you
Page 5 and 6: Page 2 The FMB organisation 3 Our s
Page 7 and 8: Single spindle lathe LINE Low cost
Page 9 and 10: Single spindle lathe LINE Standard
Page 11 and 12: Single spindle lathe LINE Standard
Page 13: Single spindle lathe LINE High-tech
Page 17 and 18: Multi spindle lathe LINE Loading ma
Page 19 and 20: Loading and unloading of machined a
Page 21 and 22: The operating mode of FMB loading m
Page 23 and 24: turbo 2 - 20 turbo 3 - 26 turbo 3 -
Page 25 and 26: turbo 40 - 100 A 40 - 100 mm Stange
Page 27 and 28: SL 80 SL 80 S A B A B 10 - 80 mm 10
Page 29 and 30: Select an FMB unirobot ® -System,
Page 31 and 32: Service partners For a continous ca

PRODUCT CATALOGUE Material flow systems for machine tools

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?