PRODUCT CATALOGUE Material flow systems for machine tools

More documents

Recommendations

Info

MT 42 / MT 65 / MT 100 The devices MT 42, MT 65 and MT 100 are automatic Bar Loading Magazines for processing bars in the diameter range of 5 - 100 mm and in lengths up to 3200 or 4200 mm on multi-spindle lathes. Bar diameter in mm 5 8 10 18 20 36 40 42 55 65 80 100 MT 42 MT 65 MT 100 Settings All operation parameters can be entered into the control panel. Positioning of limit switches is not necessary. Free of noise and vibration While processing the bar there is no contact between the material bar and the loading magazine, so whether the bar is round, spuare or hexagonal there is no problem. Insertion forces The insertion force infinitely variable via the control panel. High bar insertion force is possible as a result of the rigid anti-torsion frame design. Bar storage system (version 1) A minimum of space is needed due to the compact construction. A low cost solution for automatically loading multi-spindle lathes. Multi layer bar support (version 2) Higher loading capacity can be achieved by having four storage layers, which also saves space. Pusher Having a out-swinging pusher bar reduces the total length of the loading magazine. Bars Ø < 8 mm Small bar diameters can be separated without problem because of swinging bar stop design. (MT 42). Holding Down Device The holding down system fitted to the loading magazine FMB MT 42 allows high insertion forces into the lathe collet and it prevents distortion of small diameter bars. Bundle loader (version 3) The bundle loader offers high capacity and easy loading. 16
Multi spindle lathe LINE Loading magazines for multi-spindle lathes MT 42 MT 65 MT 100 Technical data at page 28 Operation mode of the FMB bar load magazine page 21 The FMB bar feed channel page 21 The versions of MT loading magazines Version 1 Single layer bar support Version 2 Multi layer bar support for bar diameters up to 42 mm. Version 3 Bundle loader for bar diameters up to 65 mm. Loading capacity 2,5 to. 17
Page 1 and 2: PRODUCT CATALOGUE Material flow sys
Page 3 and 4: The FMB Service-Hotline So that you
Page 5 and 6: Page 2 The FMB organisation 3 Our s
Page 7 and 8: Single spindle lathe LINE Low cost
Page 9 and 10: Single spindle lathe LINE Standard
Page 11 and 12: Single spindle lathe LINE Standard
Page 13 and 14: Single spindle lathe LINE High-tech
Page 15: Single spindle lathe LINE Individua
Page 19 and 20: Loading and unloading of machined a
Page 21 and 22: The operating mode of FMB loading m
Page 23 and 24: turbo 2 - 20 turbo 3 - 26 turbo 3 -
Page 25 and 26: turbo 40 - 100 A 40 - 100 mm Stange
Page 27 and 28: SL 80 SL 80 S A B A B 10 - 80 mm 10
Page 29 and 30: Select an FMB unirobot ® -System,
Page 31 and 32: Service partners For a continous ca

PRODUCT CATALOGUE Material flow systems for machine tools

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?