BionX Diagnostic Manual

More documents

Recommendations

Info

Battery does not accept any charge, the light does not turn on (for Ni-MH batteries only) Verify if the charger is well connected (wall and battery) yes Is the charger working end See procedures in diagnostic mode display Check the battery voltage yes Is the voltage < 5v Return battery for repair no Get a return number Check the thermistor value Call us with the value Arbre de décision REV 01
Console does not show battery status yes Is the battery frame displayed no Does the system turn on and off normally with the MODE button no 01 Check the battery voltage yes See procedure in diagnostic mode display Is the voltage < 24v no Call us to fill a non conformity form Return the battery for repair Get a return number yes Fully charge the battery and recheck Check for voltage value Call us to fill a non conformity form end Return console for repair Get a return number yes Does the console show full charge Is the voltage > or = to 27,5v no Fully charge the battery and recheck no Does the console show full charge end yes end no no yes Calibrate the battery by pressing on MODE for 20 seconds yes Does the console show full charge no yes end Charge the battery with another charger Return the battery for repair Does the console show full charge yes end Is the voltage > or = to 27,5v no Arbre de décision REV 01
Page 1 and 2: Motor doesn’t assist yes Put the
Page 3 and 4: FULL THROTTLE Put the console in di
Page 5: System does not turn on Is the batt

BionX Diagnostic Manual

Create successful ePaper yourself

Delete template?

Save as template?