datasheet - Dolomite Microfluidics

The Dolomite Centre Ltd
Manual Multi-Injection Top Chip (Part No. 3200070)
This PMMA chip can be used in combination with a base chip in the resealable chip
interface. Liquids can be dispensed into the 25 reservoirs which are 1.5mm diameter x
3mm high using a pipette. The liquids will only come into contact with an array of 1.5mm
diameter circles on the base chip.
Applications include surface modification of the base chip and deposition of cells onto the
surface of the base chip. The two channels that are shown can be used for purging the
area with gasses.
Top Chip, 1-in, 1-out (Part No. 3200071)
This PMMA chip can be used in combination with a base chip in the resealable chip
interface. Liquid can be pumped via the linear connector into the chip and across the
surface of the base chip. The channel depth is 100µm and the channel width is 11mm in
the central region.
Resealable Chips_product datasheet Page 4 of 9