Stanley 2011:34STANLE.QXD.qxd - Top Notch Distributors, Inc.

More documents

Recommendations

Info

Spring Hinges STANDARD WEIGHT SPRING HINGES Corner Units of Class EDP No. Size Radius Finish Measure 2060-R 42 0742 3 1 /2" x 3 1 /2" Square 4 Each 2060-R 42 0750 3 1 /2" x 3 1 /2" Square 26D Each 2060-R 42 2106 4" x 4" Square 26D Each 2060-R 42 2108 4" x 4" Square 10A Each 2060-R 42 0923 4 1 /2" x 4" Square 26D Each 2060-R 42 0935 4 1 /2" x 4 1 /2" Square P Each 2060-R 42 0936 4 1 /2" x 4 1 /2" Square 4 Each 2060-R 42 0939 4 1 /2" x 4 1 /2" Square 26D Each 2060-R 42 0940 4 1 /2" x 4 1 /2" Square 3 Each SQUARE 2060R DOUBLE ACTING HINGE • Double-acting hinge swings door in both directions. • Fully adjustable spring tension returns door to opening. • Commercial grade - ANSI/BHMA A156.17 Grade 3. • Accepts doors 3 /8" (9.5 mm) to 1 3 /8" (35 mm) thick. • Doors up to 30 lbs. (13.6 kg.) and 2' — 0" wide (609.6 mm) — two hinges. • Doors up to 38 lbs. (17.2 kg.) and 2' — 8" wide (812.8 mm) — three hinges. • Satin brass-finished hinge includes adjusting rod, stop pin and screws. Units of Class EDP No. Size Finish Measure CD160 46 3040 3" 4 Packs 444 East – Pennsylvania 800-233-4210 Fax 800-854-4146 Midwest – Missouri 800-211-4607 Fax 800-211-4608 Southwest – Texas 866-693-6903 Fax 866-693-6904 West – Nevada 800-722-4210 Fax 800-248-3620 www.topnotchinc.com sales@topnotchinc.com
Utility Hinges WIDE UTILITY HINGE — REMOVABLE PIN • Non-rising removable pin broad hinges are for general utility use on lightweight doors. • All sizes have five knuckles (hinges swaged for mortising). • NH804 not swaged with no holes for weld-on applications. • Nominal size applies to 804 hinges — NH804 hinge widths are approximately 1 /8" (3.2 mm) less than nominal size. • NH: No hole non-swaged. • BP: Removable brass pin. Units of Class EDP No. Size Finish Measure 804 12 0550 3" x 3" 2C Each 804 12 1000 4" x 4" 2C Each BROAD HINGE — NON-REMOVABLE PIN • Fast spun pin broad hinge is for general utility use on lightweight doors. • All sizes have five knuckles. • 808 hinges swaged for mortising. • Nominal size applies to 808 hinges. Units of Class EDP No. Size Finish Measure 808 12 3300 2" x 2" 2C Each 808 12 3950 3" x 3" 2C Each 808 12 4500 4" x 4" 2C Each NARROW UTILITY HINGE — NON-REMOVABLE PIN • Fast spun pin narrow hinge for general utility use on lightweight doors. • Size 2" (50.8 mm) and larger have five knuckles — smaller sizes have three. • 838 hinges swaged for mortising. Units of Class EDP No. Size Finish Measure 838 11 3500 2" 2C Each NARROW UTILITY HINGE — REMOVABLE PIN • Removable pin narrow hinge for general utility use on lightweight doors. • Size 2" and larger have five knuckles – smaller sizes have three. • Hinges swaged for mortising. • Furnished on order, at additional cost, not swaged with no holes for weld-on applications. Units of Class EDP No. Size Finish Measure CD840 75 1576 1 1 /2" 2C Packs 445 East – Pennsylvania 800-233-4210 Fax 800-854-4146 Midwest – Missouri 800-211-4607 Fax 800-211-4608 Southwest – Texas 866-693-6903 Fax 866-693-6904 West – Nevada 800-722-4210 Fax 800-248-3620 www.topnotchinc.com sales@topnotchinc.com
Page 1 and 2: Founded in 1843 in New Britain, Con
Page 3 and 4: 30 Lb. Bifold Panel Hardware 30 LB.
Page 5 and 6: 125 Lb. Bifold Panel Hardware 125 L
Page 7 and 8: Bifold Panel Hardware Components BO
Page 9 and 10: Bifold Panel Hardware Components AL
Page 11 and 12: 60 Lb. Panel By-Pass Dial Adjust Do
Page 13 and 14: 150 Lb. Panel By-Pass Door Hardware
Page 15 and 16: Sliding Door Hardware Components DO
Page 17 and 18: Sliding Door Hardware Component HAN
Page 19 and 20: 150 Lb. Pocket Door Hardware 150 LB
Page 21 and 22: Pocket Door Hardware Components HAN
Page 23 and 24: Residential Hinges RESIDENTIAL HING
Page 25 and 26: Residential Hinges SOLID BRASS RESI
Page 27: Spring Hinges STANDARD WEIGHT SPRIN
Page 31 and 32: Handrail Brackets/Door Trim HANDRAI
Page 33 and 34: Hobby/Craft Hardware Supports/Brace
Page 35 and 36: Gate Latches GATE LATCH BOLT • Sl
Page 37 and 38: Safety Hasps ADJUSTABLE STAPLE SAFE
Page 39 and 40: Bolts CHAIN BOLTS • For use on ca
Page 41 and 42: Screen/Storm Accessories SCREEN DOO
Page 43 and 44: Box Track BOX TRACK SINGLE STRAIGHT
Page 45 and 46: Box Track BOX TRACK HANGER (450 LBS
Page 47 and 48: Round Track ROUND TRACK SINGLE STRA
Page 49 and 50: Round Track ROUND TRACK DOUBLE SIDE
Page 51 and 52: Accessories EXTRA-HEAVY PIVOT • F

Stanley 2011:34STANLE.QXD.qxd - Top Notch Distributors, Inc.

Create successful ePaper yourself

Delete template?

Save as template?