Stanley 2011:34STANLE.QXD.qxd - Top Notch Distributors, Inc.

Cabinet Hardware
DOUBLE MAGNETIC CABINET CATCH
• For pairs of cabinet doors or full-size doors.
• Floating action magnet and pole piece assemblies
pivot to allow for full contact with strikes.
• Impregnated magnet withstands rugged use.
• Slotted screw holes in case and off-center
hole in strike assure perfect installation.
• Case size: 3 1 /4" x 1 3 /8" (82.6 mm x 35 mm),
Strike size: 1 1 /8" x 1 1 /16" (28.6 mm x 27 mm).
Units of
Class EDP No. Finish Pack Type Measure
SP45 81 0190 AL Polybag Packs
INTERLEAF CASEWORK HINGE
• Made of heavy-gauge steel.
• For 3 /4" (19 mm) thick overlay cabinet or wardrobe doors.
• Has interleaf design for close door fit.
• Available with hospital tips — prefix “HT” to class number.
• Has elongated screw holes for easy alignment, both vertically
and laterally.
Units of
Class EDP No. Finish Pack Type Measure
1592-4 35 1490 2 3 /4" 26D Packs (2/PK.)
SOLID BRASS CABINET PULL
• For cabinet doors or drawers up to 3 /4" (19 mm) thick.
• Made of solid brass.
• Referred to as “Ribbon Pulls”.
Units of
Class EDP No. Size Finish Measure
4477 34 5840 4" 26D Each
CABINET PULL
448
• For cabinet doors or drawers.
• Made of solid brass, in popular finishes or in solid aluminum.
• 1" (25.4 mm) finger clearance on all items. Projects 15 /16" (33.2 mm).
• Referred to as “wire” pulls.
• Very acceptable as pulls for bifold doors.
• Can be used on slide doors when bumper stops are employed.
• Diameter is 5 /16" (7.9 mm).
Units of
Class EDP No. Finish Pack Type Measure
4483 34 8225 3 1 /2" 10B Each
4484 34 8305 4" 10B Each
4484 34 8315 4" 26D Each
East – Pennsylvania
800-233-4210
Fax 800-854-4146
Midwest – Missouri
800-211-4607
Fax 800-211-4608
Southwest – Texas
866-693-6903
Fax 866-693-6904
West – Nevada
800-722-4210
Fax 800-248-3620
www.topnotchinc.com
sales@topnotchinc.com