Stanley 2011:34STANLE.QXD.qxd - Top Notch Distributors, Inc.

Shutter, Blinds and Corner Braces
BLIND HINGES WITH OFFSETS
• For use to hang blinds or shutters flush with casing
in both brick and frame construction.
• Use SP1640 in frame construction, SP1644 in brick construction.
• One boxed set is required for each individual blind.
• Set includes two hook assemblies, one LH strap hinge,
one RH strap hinge, and 14 - 8 x 1 flat head wood screws.
• Bright zinc plated to resist rust.
• Hinge size 4 3 /16" x 1" (106.4 mm x 25.4 mm),
throw 2" x 4 1 /8" (50.8 mm x 104.8 mm).
Units of
Class EDP No. Size Offset Finish Pack Type Measure
SP1640 39 2403 4 3 /16" x 1" 1 1 /16" Offset ST2H Polybag Packs
SP1644 39 2684 4 3 /16" x 1" 2 1 /8" Offset ST2H Polybag Packs
BLIND HOLDBACK WITH SPRING
• For use as a blind or shutter holdback.
• Includes non-rattling spring.
• Attractive design and black finish complement a variety of exterior styles.
Non-ferrous
non-rattling spring
Units of
Class EDP No. Size Offset Finish Measure
SP1685- 1 /2 39 7360 6 3 /4" KJ1 Polybag Packs (2/Pk.)
Application of non-rattling
spring which requires a
minimum space of 1 3 /8" between
house and blind (No. 1685- 1 /2).
CORNER BRACE
• Reinforces right-angle corner joints.
• Screw holes are staggered in 5" (127 mm) and larger.
• Available in bright zinc, satin brass tone
or Weathergard galvanized finish.
• T997 UPC tagged.
Size
Units of
Class EDP No. (Side Length) Finish Measure
997 30 3000 1" 2C Each
997 30 3320 2" 2C Each
452
East – Pennsylvania
800-233-4210
Fax 800-854-4146
Midwest – Missouri
800-211-4607
Fax 800-211-4608
Southwest – Texas
866-693-6903
Fax 866-693-6904
West – Nevada
800-722-4210
Fax 800-248-3620
www.topnotchinc.com
sales@topnotchinc.com