Complete catalogue roller shutter automation - Becker-Antriebe ...

with automated roller
shutter and sun
protection systems
with diameters of 50 mm and above
Additional features
E
868,3 MHz
Integrated radio receiver
compatible with the
Centronic control unit range
Easy programming of
the limit positions with
and without fixed stops
Smooth upper stop
Dynamic torque adjustment
to changes in the
roller shutter element
3x
Intelligent installation
management permits limit
position corrections
2 freely selectable intermediate
positions can be
programmed
Limit positions status
indicator (LSI) signals
missing limit positions
Motor head can be
overwrapped
Blockage detection in the
UP direction (anti-freeze
mechanism)
Single, group and central
control units are possible,
with up to 16 transmitters
Anti-freeze mechanism at
the top with automatic curtain
length adjustment that
can be additionally activated
Automatic increase of
the pressing force with
anti-lifting devices
Automatic curtain length
adjustment
Examples for Centronic radio control units
for the PROF series
Dimensions
Centronic TimeControl
TC511
Wall transmitter with timer
b*
(mm)
l 1
(mm)
l 2
(mm)
c
(mm)
d
(mm)
40 472 512 45 17
40 472 512 45 17
Centronic TimeControl
TC4410-II
10-channel hand-held transmitter
with timer
40 501 541 45 17
40 526 566 45 17
40 545 585 45 17
* Width of drive adapter of S60-O (4930 200 222 0) on page 80.
Should another drive adapter be selected measure l 2 will be different.
Save
Energy
Ø 37,5
8kt SW56,9
14
21,45
42
40
Drive adapter for obstacle
detection
See page 80
29