VERT Filter List - Pirelli EcoTechnology - Pirelli Ambiente

More documents

Recommendations

Info

2.11. Safety The PFS must be mounted according to the manufacturer's assembly instructions such that no additional risks occur. The assembly must comply with the legislation on health, safety and visibility in the country where the PFS is deployed. 2.12. Bypass Bypass arrangements, which permit circumventing the filter during excess back-pressure, are generally impermissible. Both manual and automatic bypass are prohibited. 2.13. Diagnosis access Access to the mounted PFS is required to measure the raw emissions for engine diagnosis and to determine the filtration efficiency in situ if requested. For this purpose, the filter casing or exhaust pipe must have, upstream of the filter element, a diagnose access of minimum 40 mm inner diameter [11]. 2.14. Cleaning and disposal The filter element requires periodic cleaning from ash residues and the element must be eventually disposed off. Only methods that are environmentally acceptable, manufacturer approved and declared in the application documents for the suitability test shall be used for cleaning and disposal. The trapped residues are toxic wastes. These must be carefully collected and, if in small quantities, disposed together with other industrial waste in a garbage incinerator. The local authorities decide how larger quantities shall be disposed. Workers must be protected from exposure to fine dust during cleaning and disposal. 2.15. Substituting mufflers for PFS Employing so-called muffler modules instead of PFS (e.g. during PFS maintenance or filter cleaning) is only permissible with the approval of the regulatory authorities. The only permitted muffler modules are those that are tested during the VERT ® certification, described in the test reports and clearly identified as such. 2.16. Technical reporting the retrofit An installation report must be prepared for each retrofit. See appendices and www.vsbm.ch. The retrofitted vehicle or equipment must display a VERT ® Label with an individual running number , see Appendix. The installation report must be submitted to the VERT ® coordination office for registration in the VERT ® database. 2.17. COP = Conformity of Production Responsibility of the manufacturers and subject to an annual VERT ® audit procedure. The rules, for manufacturing quality control, are still to be defined. 2.18. IUC = In Use Compliance Tests Responsibility of the manufacturers and subject to an annual VERT ® audit procedure. The rules for periodic field testing of the PFS, are still to be defined. 2.19. Operation Manual Each filter retrofitted must be accompanied by an operation manual in the language of the country where the filter is used. This manual must contain all information on functional, maintenance and safety issues, cleaning procedures and responsibility statements. 2.20. Impact on Energy Consumption The overall energy impact of the PFS including all effects of back pressure and regeneration integrated over the life cycle must remain below 2 % of engine nominal power. VERT ® Filter List 2010 12 / 33
3. VERT ® List of approved systems and components 3.1. Particle filter systems for prolonged deployment Identity of suitability test Status Certificate MANUFACTURER PFS Type: Type description of the PFS family F: Filter medium R1: Regeneration method 1 K: Electronic monitoring unit VFT1 VFT2 VFT3 VSET PCFE NO2 Number Date AIRMEEX PFS Type: CARMEX SC F: IBIDEN SiC wallflow filter R1: FBC satacen (Fe) R2: FBC satacen 3 (Fe) K: AIRMEEX DTL 3600 B148/08.04 B171/11.05 B171/11.05 B043/09.97 C B B B171/11.05 18.03.2010 BASF PFS Type: DPX1 F: CORNING DuraTrap ® CO cell filter R: Catalytic Coating K: Dyntest B106/05.02 B123/02.03 B123/02.03 B114/04.03 C A B123/02.03 18.03.2010 BASF PFS Type: DPX2 F: CORNING DuraTrap ® CO cell filter R: Catalytic Coating K: Dyntest B106/05.02 B136/09.03 B136/09.03 B137/09.03 C A B136/09.03 18.03.2010 BAUMOT PFS Type: BAB/BA F: CORNING DuraTrap ® CO cell filter R: Catalytic coating K: BauDAT AML B210/12.07 B219/05.08 B219/05.08 B215/04.08 C A B219/05.08 18.03.2010 BERSY PFS Type: BPF-DOC F: Liqtech SiC cell filter R: FBC CAM-FBC (Fe) K: Pirelli Ambiente B165a/00.05 B199a/04.07 B199a/04.07 B179a/04.06 B A B199a/04.07 18.03.2010 BERSY PFS Type: BPF F: Liqtech SiC cell filter R: FBC CAM-FBC (Fe) K: Pirelli Ambiente B165a/00.05 B200a/04.07 B200a/04.07 B179a/04.06 B B B200a/04.07 18.03.2010 DCL PFS Type: MINE-X SOOTFILTER F: CORNING DuraTrap ® CO cell filter R: Catalytic Coating K: DYNTEST AML V.3.0 B129/04.03 B230/08.08 B230/08.08 B231/07.08 C A B230/08.08 18.03.2010 DCL PFS Type: Titan and BlueSky F: IBIDEN SiC cell filter R1: Replace Filter R2: Electrical in-situ at standstill R3: FBC satacen (Fe) R4: FC EOLYS (Ce) K: DCL AF01 B078/07.00 B125/02.03 B125/02.03 B043/09.97 C B B B B B125/02.03 18.03.2010 VERT ® Filter List 2010 13 / 33
Page 1 and 2: VERT ® Filter List VERT certified
Page 3 and 4: Impress Legal status This VERT ® F
Page 5 and 6: Preface Worldwide efforts, to curta
Page 7 and 8: 1. VERT ® testing of particle filt
Page 9 and 10: 1.6. Approval of OBM units All filt
Page 11: 2.4. Pressure loss • Fresh filter
Page 15 and 16: Identity of suitability test Status
Page 17 and 18: 3.2. On-board monitoring (OBM) Iden
Page 19 and 20: 3.5. Regeneration additive (FBC) Id
Page 21 and 22: 4. Self commitments of VERT ® cert
Page 23 and 24: The VERT ® Scientific-Committee ca
Page 25 and 26: EHC EMINOX EXOCLEAN GAT HJS HSE- EU
Page 27 and 28: 9. Acronyms AEEDA Association Europ
Page 29 and 30: VERT ® installation report for PFS
Page 31 and 32: Particle Filter Systems for Interna
Page 33 and 34: 11 FBC + CRT: the PSA system 5/2000

VERT Filter List - Pirelli EcoTechnology - Pirelli Ambiente

Create successful ePaper yourself

Delete template?

Save as template?