Catalogue - Movax

SIDE-GRIP SHEET PILE DRIVERS
Movax Side-Grip vibratory hammer is a very productive excavator mounted pile driver
and extractor. The same unit can handle, pitch and drive the sheet piles. It is capable to
accomplish the whole pile driving process without need of manual handling of the piles or assisting
machinery.
The Side-Grip combined with the excavator is an effective solution for pile driving on most sites
from open areas to confined spaces or limited headroom. An advanced Auto C control system
makes the operating accurate and easier. Movax stands for high productivity, safety and low
operating costs.
SP-50F
SP-60F
SP-70F4
From 25 to 40 ton
SP – series Side-Grip vibratory hammers are proven
technology for sheet pile installation. The high
frequency vibro is fast, accurate and safe method
and suitable for driving sheet piles into variety of
different soils. Its Side-Grip is capable of clamping
most common U- and Z-section sheet piles. These
pilers can be alternatively fitted with clamps for
small diameter tubular steel piles up to 325 mm.
SP-70F4 is one of the strongest excavator mounted
vibros and require from 33 to 40 ton excavator.
SP-50F and SP-60F are working on base machines
from 22 to 30 ton making them preferred choice for
many contractors.
SPH-75
SPH-80
From 25 to 40 ton
SPH-80 is sharing the Side-Grip geometry with SP –
series but differs from other with its directed vibro
technology. Directional hitting reduces ground vibration
to a lower level than in the same size conventional
vibratory driver. Side-Grip arms can be fitted
with small diameter tubular pile clamps up to 325 mm
diameter. SPH-80 is designed to work on 33 to 40 ton
base machines.
8