DSOF-80000 Series - Sloan Valve Company

Code No. 0816644
Rev. 1 (10/12)
INSTALLATION INSTRUCTIONS
SINGLE, DOUBLE, TRIPLE STATION
DESIGNER SERIES
SOLID SURFACE LAVATORY SYSTEMS
DSOF-80000/DSG-80000/DSWD-80000/DSCT-80000 Series
Single/Double/Triple Station Solid Surface Lavatory Sink Systems
DSWD-81000 Designer Series Weir Deck
One Station Solid Surface Lavatory System
DSOF-81000 Designer Series Open Front
One Station Solid Surface Lavatory System
DSG-81000 Designer Series Gradient
One Station Solid Surface Lavatory System
DSCT-81000 Designer Series Counter Top
One Station Solid Surface Lavatory System
®
DSWD-82000 Designer Series Weir Deck
Two Station Solid Surface Lavatory System
DSOF-82000 Designer Series Open Front
Two Station Solid Surface Lavatory System
DSG-82000 Designer Series Gradient
Two Station Solid Surface Lavatory System
DSG-82000 Designer Series Counter Top
Two Station Solid Surface Lavatory System
DSWD-83000 Designer Series Weir Deck
Three Station Solid Surface Lavatory System
DSOF-83000 Designer Series Open Front
Three Station Solid Surface Lavatory System
DSG-83000 Designer Series Gradient
Three Station Solid Surface Lavatory System
DSG-83000 Designer Series Counter Top
Three Station Solid Surface Lavatory System
LIMITED WARRANTY
Unless otherwise noted, Sloan Valve Company warrants its Products to be made of first class materials, free from defects of material or workmanship under normal
use and to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of three
years (1 year for SF Faucets, special finishes and PWT electronics and 30 days on PWT software) from date of purchase. During this period, Sloan Valve Company
will, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer’s cost, and this shall be the
sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or
organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the
batteries.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL
DAMAGES OF ANY MEASURE WHATSOEVER.

PRIOR TO INSTALLATION
Prior to installing the Sloan Designer Series Lavatory System, install the items
listed below. Also, refer to the appropriate rough-in diagram on pages 2 – 6.
• Water Supply
• Hot and cold water supply lines or tempered water supply line
• Drain lines
Important:
• ADEQUATE STRUCTURAL SUPPORT IN OR BEHIND THE WALL IS REQUIRED.
LAVATORY SYSTEM ROUGH-IN SINGLE STATION
DSWD-81000 Designer Series Weir Deck
Single Station Solid Surface Lavatory System
2 ½”
2 ½” (63 mm)
(63 mm) 2 ½” 22”
22” (63 (558 mm) mm)
(558 mm) 22”
(558 mm)
6 ½”
(165 mm) 6 ½”
(165 mm)
6 ½”
(165 mm)
17”
(431 mm)
17”
(431 17” mm) 30”
(431 mm) (762 mm)
30”
(762 30” mm)
(762 mm)
CENTERLINE
CENTERLINE
24”
(609 mm)
5”
1 ¹/8”
5”
1 (127 ¹/8” 5” mm) (127 mm)
(28 1 mm) ¹/8” (28 (127 mm) mm)
(28 mm)
CENTERLINE
DSOF-81000 Designer Series 13” Open Front
(330 mm)
Single Station Solid Surface Lavatory System
22”
(558 mm)
22”
(558 mm)
1 3/4”
(44 mm)
1 3/4”
(44 mm)
24”
(609 mm)
13”
(330 mm)
CENTERLINE
CENTERLINE
1 3/4”
(44 mm)
1 3/4”
(44 mm)
5” (127 mm)
17”
(431 mm)
2 1/2” (63 mm)
2 1/2” (63 mm)
34”
6½” (863 mm)
(165 mm) 34”
6½” (863 34” mm)
(165 6½” mm) (863 mm)
(165 mm)
5” (127 mm)
17”
(431 mm)
2 1/2” (63 mm)
2 1/2” (63 mm)
5” (63 mm)
2
REFER TO THE APPROPRIATE ROUGH-IN DIAGRAM ON PAGES 2 – 6 FOR
DRY WEIGHT OF SINK. STRUCTURAL SUPPORT MUST HAVE A MINIMUM
PULLOUT RATING OF 1000 POUNDS (450 kg).
• ALL PLUMBING SHOULD BE INSTALLED IN ACCORDANCE WITH APPLICABLE
CODES AND REGULATIONS.
• BEFORE CONNECTING FLEX HOSES TO SUPPLY STOPS, FLUSH ALL WATER
LINES UNTIL WATER IS CLEAR.
5” 5”
5” (127 mm)
(127 mm)
(127 mm)
5” (63 mm)
ADA
22”
(558 mm)
22”
(558 22” mm)
(558 mm)
5” 5”
(127 (127 5” mm) mm)
(127 mm)
Water Supply
Water Supply
Water Supply
24”
(610 mm)
24”
ADA AD ADA 20” (610 24” mm)
(508mm) (610 mm)
ADA
ADA 20”
(508mm) 20”
(508mm)
C L
22”
(558 mm)
5”
(127 mm)
4”
(101 mm)
ADA
C L
4” (101 mm)
5”
(127 mm)
4”
(101 mm)
P-Trap Configuration
(In Wall)
4” (101 mm)
P-Trap Configuration
(In Wall)

LAVATORY SYSTEM ROUGH-IN SINGLE STATION
DSG-81000 Designer Series Gradient
Single Station Solid Surface Lavatory System
2 ½” 2 ½”
(63 (63 mm) mm)
22” 22”
2 ½”
(558 (558 mm) mm) (63 mm)
22”
(558 mm)
17” 17”
6 ½” 6 ½”
(431 (431 mm) mm)
(165 (165 mm) mm)
17”
6 ½” 30” 30” (431 mm)
(165 mm)
(762 (762 mm) mm) 30”
(762 mm)
CENTERLINE
CENTERLINE
CENTERLINE
5”
1 ¹/8” 5”
1 ¹/8” (127 mm)
(28 mm) (127 mm)
(28 mm)
5”
1 ¹/8” (127 mm)
(28 mm)
DSCT-81000 Designer Series Counter Top
Single Station Solid Surface Lavatory System
30”
(762 mm)
6 ¼”
(158 mm)
4”
(101 mm)
6 ¼”
(158 mm)
4”
(101 mm)
30”
(762 mm)
6½”
(165 mm)
6½”
(165 mm)
6 ¼”
(158 mm)
4”
(101 mm)
4”
(101 mm)
4”
(101 mm)
34”
(864 mm)
3
5”
(127
5”
mm)
(127 mm)
5”
(127 mm)
34” 34”
(863 mm)
34”
(863 mm)
ADA
4”
(101 mm)
4”
(101 mm)
34”
(864 mm)
22”
(558 22” mm)
(558 mm)
22”
(558 mm)
5”
(127 5” mm)
(127 mm)
5”
(127
Water
Water mm)
Supply
Supply
Water Supply
24” 24”
(610 mm) mm)
24”
ADA 20”
(610 mm)
ADA AD ADA (508mm) 20”
(508mm)
ADA AD ADA
11 ¾”
(298 mm)
4”
(101 mm)
4”
(101 mm)
34”
(864 mm)
11 ¾”
(298 mm)
ADA

LAVATORY SYSTEM ROUGH-IN TWO STATION
DSWD-82000 Designer Series Weir Deck
Double Station Solid Surface Lavatory System
2 ½”
(63 mm)
22”
(558 mm)
4”
(101 mm)
1 ¹/8”
(28 mm)
52”
(1320 mm)
60”
(1524 mm)
CENTERLINE
DSOF-82000 Designer Series Open Front
Double Station Solid Surface Lavatory System
22”
(558 mm)
6”
(152 mm)
60”
(1524 mm)
30”
(762 mm)
12”
(305 mm)
CENTERLINE
DSG-82000 Designer Series Gradient
Double Station Solid Surface Lavatory System
2 ½”
(63 mm)
22”
(558 mm)
4”
(101 mm)
1 ¹/8”
(28 mm)
52”
(1320 mm)
60”
(1524 mm)
CENTERLINE
4
5”
(127 mm)
6”
(152 mm)
5”
(127 mm)
5”
(127 mm)
34”
4” (863 mm)
(101 mm)
4”
(101 mm)
2 1/2” (63 mm)
2 1/2” (63 mm)
5” (63 mm)
5”
(127 mm)
34”
(863 mm)
22”
(558 mm)
ADA AD
5”
(127 mm)
Water Supply
ADA 20”
(508mm)
22”
(558 mm)
ADA AD
ADA
22”
(558 mm)
C L
5”
(127 mm)
4”
(101 mm)
24”
(610 mm)
5”
(127 mm)
ADA 20”
(508mm)
4” (101 mm)
Water Supply
24”
(610 mm)
P-Trap Configuration
(In Wall)

LAVATORY SYSTEM ROUGH-IN TWO STATION
DSCT-82000 Designer Series Counter Top
Double Station Solid Surface Lavatory System
15”
(381 mm)
30”
(762 mm)
LAVATORY SYSTEM ROUGH-IN THREE STATION
DSWD-83000 Designer Series Wier Deck
Triple Station Solid Surface Lavatory System
2 ½”
(63 mm)
22”
(558 mm)
4”
(101 mm)
82”
(2082 mm)
1 ¹/8”
(28 mm)
90”
(2286 mm)
CENTERLINE
DSCT-83000 Designer Series Open Front
Triple Station Solid Surface Lavatory System
22”
(558 mm)
6”
(152 mm)
60”
(762 mm)
12”
(305 mm)
90”
(2286 mm)
CENTERLINE
60”
(762 mm)
12”
(305 mm)
15”
(381 mm)
5
6 ¼”
(158 mm)
4”
(101 mm)
4”
(101 mm)
4”
(101 mm)
4”
(101 mm)
34”
(864 mm)
6”
(152 mm)
2 1/2” (63 mm)
2 1/2” (63 mm)
ADA AD ADA
5”
(127 mm)
34”
(863 mm)
5” (63 mm)
22”
(558 mm)
11 ¾”
(298 mm)
5”
(127 mm)
Water Supply
24”
(610 mm)
ADA AD ADA 20”
(508mm)
ADA
22”
(558 mm)
C L
5”
(127 mm)
4”
(101 mm)
4” (101 mm)
P-Trap Configuration
(In Wall)

LAVATORY SYSTEM ROUGH-IN THREE STATION
DSG-83000 Designer Series Gradient
Triple Station Solid Surface Lavatory System
2 ½”
(63 mm)
22”
(558 mm)
4”
(101 mm)
1 ¹/8”
(28 mm)
82”
(2082 mm)
90”
(2286 mm)
DSCT-83000 Designer Series Counter Top
Triple Station Solid Surface Lavatory System
15”
(381 mm)
30”
(762 mm)
TOOLS REQUIRED FOR INSTALLATION
• Electric drill for drilling anchor holes.
• Socket or open end wrench for installing anchoring fasteners.
• Adhesive Caulk for vanity or bracket mounting
• Adhesive for Lavatory optional mounting
SINK LOCATION
30”
(762 mm)
6
15”
(381 mm)
5”
(127 mm)
6 ¼”
(158 mm)
4”
(101 mm)
4”
(101 mm)
5”
(127 mm)
34”
(863 mm)
4”
(101 mm)
4”
(101 mm)
34”
(864 mm)
22”
(558 mm)
ADA AD
• Open end wrench for connecting water lines.
• Pipe wrench for installing drain lines.
5”
(127 mm)
Water Supply
ADA 20”
(508mm)
ADA AD ADA
24”
(610 mm)
Determine the appropriate wall location for the Lavatory System. Consider that hot and cold water supply lines, a drain line, and an electrical source (receptacle for
hardwired faucets) will be required. Compare the physical dimensions of the Lavatory System to the space available for the installation. If wall is not load bearing, a
carrier may be required behind the wall. Refer to the appropriate Rough-in diagram on pages 2 – 6 for Lavatory System dimensions.
Prior to Lavatory System installation, electric wiring, water supply and drain must be installed.
1– STRAINER INSTALLATION
A
B
Insert Strainer into Basin using plumbers putty (supplied by installer).
From beneath Basin, install the Rubber Gasket, Cardboard Seat and
Drain Nut onto Strainer. Secure Drain Nut against Basin.
RUBBER GASKET
CARDBOARD SEAT
DRAIN NUT
STRAINER
11 ¾”
(298 mm)

2A – VANITY MOUNTING
A
B
2B – WALL MOUNTING
A
B
C
D
E
Note: Wall mounting fasteners supplied by others.
Measure and mark a level line on the wall at your required height.
3 - INSTALL FAUCET, SENSOR, DRAIN AND WATER LINE CONNECTIONS
A
B
Apply adhesive caulk (not supplied) to perimeter of vanity casework and
corners of deck.
With the help of another person, place the lavatory deck on vanity.
Measure and mark the Bracket locations as shown. Drill holes in the
wall using the Mounting Bracket as a template.
Install wall anchors that are specific for that type of wall: drywall,
concrete, metal studs, wood studs, etc. (supplied by installer). Some
wall materials will require additional reinforcement. Anchors with a
minimum pull-out force of 1000 lbs. (reinforce wall at anchor points.)
Secure Mounting Brackets (optional) to the wall. Use left and right
Brackets as required.
Note: Be sure Mounting Bracket is level and plumb against wall so
that Lavatory will drain correctly once assembly is completed.
Apply adhesive (not supplied) to brackets and corners of lavatory deck.
With the help of another person, place the Lavatory on the Mounting
Brackets and secure to screws to subtop.
Caution: Do not leave lavatory on mounting brackets unsupported.
It may fall and cause damage or personal injury.
Install faucet, sensor, and water line connections as instructed in the
installation instructions furnished with the Faucet.
Install P-trap and drain lines making sure that all connections are
secure.
Note: P-trap and drain lines furnished by others.
7
WALL
WATER
SUPPLY
LINE
DRAIN
LINE
FLEX HOSE
MOUNTING BRACKETS
C Flush supply line(s) of any debris. Install Flex Hose(s) to water supply
line(s). Tighten fitting(s) securely.
CARE AND CLEANING
DO NOT USE abrasive or chemical cleaners (including chlorine bleach) to clean lavatory deck or faucets that may dull the luster and attack the finish. Use ONLY soap
and water, then wipe dry with clean cloth or towel.
While cleaning the sink area, protect the faucet from any splattering of cleaner. Acids and cleaning fluids will discolor or remove chrome plating.
STRAINER
P-TRAP

PARTS LIST
7
1
Item Description
No.
1 DSG-81000 Gradient (triple)
2 DSG-82000 Gradient (double)
3 DSG-83000 Gradient (single)
4 DSOF-83000 Open Front (triple)
5 DSOF-82000 Open Front (double)
6 DSOF-81000 Open Front (single)
7 ELB-3 Right Mounting Bracket (optional) (not supplied)
8 ELB-4 Left Mounting Bracket (optional) (not supplied)
9 ETF-460-A Grid Strainer Assembly
- Sloan Faucet (model varies)
8
2
4
3
8
5
6
9

PARTS LIST
7
Item Description
No.
1 DSWD-81000 Wier Deck (single)
2 DSWD-82000 Wier Deck (double)
3 DSWD-83000 Wier Deck (triple)
4 DSCT-83000 Counter Top (triple)
5 DSCT-82000 Counter Top (double)
6 DSCT-81000 Counter Top (single)
7 ELB-3 Right Mounting Bracket (optional) (not supplied)
8 ELB-4 Left Mounting Bracket (optional) (not supplied)
9 ETF-460-A Grid Strainer Assembly
- Sloan Faucet (model varies)
1
NOTICE:
The information contained in this document is subject to change without notice.
8
2
4
3
SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com
COPYRIGHT © 2012 SLOAN VALVE COMPANY Code No. 081664 – Rev. 1 (10/12)
9
5
6
9