Invento IFT Drives - Systemair

Invento EC Drive
DOMEL
Controller Configuration
34
35
100
101
Speed output mode
SO output signal
0: disabled (input)
1: 2..10V (1mA)
2: FREQ(10V, 1mA)
3: PWM(25mA)
4: PWM(10V,1mA)
5: 0..20mA
6: 0..10V(1mA)
7: 4..20mA
8: FREQ(25mA)
9: hhh
>9: reserved
2: reserved
0…9
-10000…2
6
1
1
0.01%
W/1
W/1
/
/
7.1.4 Description of supported Input Registers:
Input Registers
36 1 EC drive type EC Drive type *1 NaN R/0 /
37 2 Firmware version Software version *2 NaN R/0 /
38 3 Required Speed Required speed in RPM 0 1 R/0 m in-1
39 4 Speed Current speed in RPM 0 1 R/0 %
40 5 Temperature Controller Temperature 0 0.1 R/0 °C
41 6 DC Bus Voltage DC Bus Voltage in V 0 1 R/0 V
42 7 AC voltage AC Voltag in V 0 0.1 R/0 V
43 8 15V DC Voltage 15V Power supply in V 0 0.1 R/0 V
44 9 Analog Input 1 Analog input 1 voltage -300..2000 0 0.01 R/0 V
45 10 Analog Input 2 Analog input 2 voltage -300..2000 0 0.01 R/0 V
46 11 Reserved
47 12 SO voltage Speed Output output voltage -300..2000 0.01 R/0 V
48 13 SO current Speed Output output current -300..3300 0.01 R/0 A
49 14 R/0
50 11 Minutes Operating minutes counter 0 - 1439 0 1 R/0 Minutes
51 12 Day Operating days counter 0 - 65535 0 1 R/0 days
52 13 FM_Min_Last
Fire Mode function: Operating mi nutes
counter (las t event)
0 - 1439 0 1 R/0 m in
53
54
14-18
19
Reserved for debug
ErrorCode
Red LED error codes (priority in the
order below):
7 = motor failed to start repeatedly
6 = under or overvoltage
5 = motor missconnected/faulty
4 = internal frequency converter fault 0..7, -1 x 1
R/0
3 = temperature protection active
2 = active overcurrent protection
1 = slow blink=standby
-1 = fast blink (fire activated)
0 = always on (operating normally)
55 20 FireMinutes Minutes under fire mode. 0-1439 1 R/0 m in
56 21 FireDays Days under fire mode. 0 - 65535 1 R/0 days
57 22 FireCycles Fire Mode function: Event counter 1 R/0
58 23 OpMinutes Minutes of operation 1 R/0 m in
59 24 OpDays Days of operation (RPM>0, no error) 0 - 65535 0 1 R/0 days
60 25-30 Reserved
Notes:
*1: depends on the type of housing, max current
*2: last version of firmware
DOMEL – Invento IFT EC Drives – Operating instruction
Version: V3.0, June2013
18