AVEC RFP No. PUR-97G-03/12 - Alaska Village Electric Cooperative

More documents

Recommendations

Info

Stebbins Power Plant Living Quarters Upgrades Section 01340 Stebbins, Alaska Shop Drawings, Product Data, and Samples PART 1 GENERAL 1.01 REQUIREMENTS INCLUDED SECTION 01340 SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES A. Provide shop drawings, product data, and samples for all components of the work. 1.02 RELATED REQUIREMENTS A. Section 01300 - Submittals B. Section 01400 - Quality Control C. Section 01630 - Product Options and Substitutions D. Section 01700 - Contract Closeout 1.03 SHOP DRAWINGS A. Present drawings in a clear and thorough manner. Label each Shop Drawing with Owner’s Project name and Project number; identify each element of the Shop Drawings by reference to sheet number and detail, or schedule. B. Identify field dimensions; show relation to adjacent or critical features or Work or products. C. Minimum Sheet Size: 8-1/2"x11". Larger sheets may be submitted in multiples of 8- 1/2"x11". D. Shop drawings shall be stamped by a professional engineer licensed int eh state of Alaska. 1.04 PRODUCT DATA A. Submit only pages which are pertinent; mark each copy of standard printed data to identify pertinent products, referenced to Specification section and Article number. Show reference standards, performance characteristics, capacities, wiring and piping diagrams and controls, component parts, finishes, dimensions, and required clearances. B. Modify manufacturer's standard schematic drawings and diagrams to supplement standard information and to provide information specifically applicable to the Work. Delete information not applicable. 1.05 SAMPLES A. Submit full range of manufacturer's standard finishes except when more restrictive requirements are specified, indicating colors, textures, and patterns, for Owner 01340 - 1
Stebbins Power Plant Living Quarters Upgrades Section 01340 Stebbins, Alaska Shop Drawings, Product Data, and Samples selection. B. Submit samples to illustrate functional characteristics of products, including parts and attachments. C. Approved samples which may be used in the Work are indicated in the Specification section. D. Label each sample with identification required for transmittal letter. E. Provide field samples of finishes at Project, at location acceptable to Owner, as required by individual Specification section. Install each sample complete and finished. Acceptable finishes in place may be retained in completed Work. 1.06 MANUFACTURER'S INSTRUCTIONS A. Manufacturer's instructions for storage, preparation, assembly, installation, start-up, adjusting, balancing, and finishing under provisions of Section 01400. 1.07 CONTRACTOR REVIEW A. Review submittals prior to transmittal; determine and verify field measurements, field construction criteria, manufacturer's catalog numbers, and conformance of submittal with requirements of Contract Documents. B. Coordinate submittals with requirements of Work and of Contract Documents. C. Sign or initial each sheet of Shop Drawings and product data, and each sample label to certify compliance with requirements of Contract Documents. Notify Owner in writing at time of submittal, of any deviations from requirements of Contract Documents. D. Do not fabricate products or begin Work which requires submittals until return of submittal with Owner acceptance. 1.08 SUBMITTAL REQUIREMENTS A. Each submittal to be numbered by Specification Section and Paragraph. Revisions shall be identified by a hyphen after the paragraph, with a letter designator. Example: 1st submittal "01010 1.08A" 2nd submittal 01010 1.08A - A". B. Transmit submittals in accordance with the required submittal schedule and in such sequence to avoid delay in the Work. C. Provide 8 1/2" x 5 1/2" blank space on each submittal for Contractor and Engineer stamps. D. Apply Contractor's stamp, signed or initialed, certifying to review, verification of products, field dimensions and field construction criteria, and coordination of information with requirements of Work and Contract Documents. E. Coordinate submittals into logical groupings to facilitate interrelation of the items. 01340 - 2
Page 1 and 2: REQUEST FOR FIRM PROPOSALS AVEC RFP
Page 3 and 4: ALASKA VILLAGE ELECTRIC COOPERATIVE
Page 19 and 20: AVEC RFP No. PUR-97G-03/12 Stebbins
Page 21 and 22: CONTRACT Article I Parties Parties.
Page 23 and 24: Article IV Contract Price and Payme
Page 25 and 26: Article VI Indemnification Indemnif
Page 27 and 28: 3. Authorized Representatives. The
Page 29 and 30: PERFORMANCE BOND KNOW ALL MEN BY TH
Page 31 and 32: where an office is regularly mainta
Page 33 and 34: TABLE OF CONTENTS Stebbins Power Pl
Page 35 and 36: Stebbins Power Plant Living Quarter
Page 45: Stebbins Power Plant Living Quarter
Page 97 and 98:
Stebbins Power Plant Living Quarter
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Stebbins Power Plant Upgrades Secti
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207:
show all

AVEC RFP No. PUR-97G-03/12 - Alaska Village Electric Cooperative

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?