CONSTANT SPEED TAPPING

More documents

Recommendations

Info

RDT, RDTIC & RCT Installation Tapmatic Can Supply Tools Ready To Fit Your Machine. RDT, RDTIC and RCT units take the burden of reversal away from the machine and therefore require a stop arm to activate their self-contained reversing mechanism. This arm must be positioned by the orientation collar to the exact location of the machine’s stop block then locked in place and fixed positively with the locking screw provided. Tapmatic has stop arms to fit most popular machines. Just give us your machine make and model #. If we have not already supplied tools for your machine, we may need the information shown below. If Your Machine Already Has A Stop Block We Will Need The Dimensions Shown Below To Prepare Your Tool. If we do not already have a custom stop arm available just provide the following information and we’ll make one for you. Installing an RDT, RDTIC or RCT on your machine is simple and Tapmatic experts are as near as your phone for any help you may require. Please contact our factory at 800 854-6019, FAX: 208/773- 3021 and simply provide the dimensions requested. We will supply a tool modified to fit your machine. 28. ISO 9001 CERTIFIED: 802 CLEARWATER LOOP, POST FALLS, ID 83854, PHONE 800/854-6019, FAX: 208/773-3021, www.tapmatic.com
NON REVERSING TOOLS RDT, RDTIC And RCT Installation If Your Machine Does Not Already Have A Stop Block Please Complete Either Spindle A or Spindle B Below. SPINDLE A SPINDLE B ISO 9001 CERTIFIED: 802 CLEARWATER LOOP, POST FALLS, ID 83854, PHONE 800/854-6019, FAX: 208/773-3021, www.tapmatic.com 29.
Page 1 and 2: NON REVERSING TOOLS CONSTANT SPEED
Page 3 and 4: NON REVERSING TOOLS Cut Cycle Times
Page 5 and 6: NON REVERSING TOOLS High Production
Page 7 and 8: NON REVERSING TOOLS RDTXT50 Extende
Page 9 and 10: NON REVERSING TOOLS New RCT50 With
Page 11 and 12: NON REVERSING TOOLS RDTIC50, 75 & 8
Page 13: NON REVERSING TOOLS Reduced Cycle T

CONSTANT SPEED TAPPING

Create successful ePaper yourself

Delete template?

Save as template?