CONSTANT SPEED TAPPING
CONSTANT SPEED TAPPING
CONSTANT SPEED TAPPING
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NON REVERSING TOOLS<br />
High Production CNC Applications Without Machine Reversal<br />
Ask For RCT or RDTIC For Internal Coolant<br />
Balanced High Pressure Internal Coolant SystemV<br />
Delivers maximum volume at pressures up to 50 bar or 700 psi.<br />
Tapping head can be operated with or without internal coolant<br />
flow. If dirty coolant causes blockage, coolant tube can be<br />
removed and cleaned in minutes. US. Patent #5213453<br />
Minimum Quantity Lubrication Through The SpindleV<br />
If your machine uses MQL through the spindle, Tapmatic can<br />
deliver RDTIC tools especially made for these Near Dry<br />
Machining applications.<br />
Please contact our sales engineers at 800 854-6019<br />
RDTIC models come with standard nuts which allow some coolant flow through collet slots. To restrict flow to the coolant hole of the tap and seal the collet<br />
slots, the tools may also be ordered with a sealing disk nut. Please add "S" to the end of the order numbers shown below to specify tool with sealing disk<br />
nuts.<br />
For MACHINING CENTERS With INTERNAL COOLANT CAPABILITY<br />
New RCT- Reduced Cycle Time Tapping<br />
Coming In 2006<br />
NEW<br />
RCT-50 RDTIC RDTIC RDTICXT<br />
RCT RDTIC HSK RDTIC RDTICXT<br />
Pages 22-23 Page 25 Page 2R Page 26<br />
___________________________________________________________________________________________________________________<br />
RCT50 #10-1/2" RDTIC50 #10-1/2" RDTIC50 #10-1/2" RDTICXT50 #10-1/2"<br />
RDTIC75 3/8"-3/4"<br />
RDTIC85 1/2”-1”<br />
___________________________________________________________________________________________________________________<br />
_____________________________________________________________________________________________________________________________________________<br />
CST TOOL ORDERING INFORMATION. Order Separately:<br />
(A) Tapping Attachment. (B) Stop Arm. (C) NC ARBORS ER COLLETS Page 46<br />
See following pages. See following pages. Page 49 Use square drive collets whenever<br />
Please order by catalog # and tap size Special center distances or ready possible.<br />
capacity. Tool capacity must be reduced made stop arms to fit your machines<br />
by 25% when using roll form.<br />
are also available. Please consult factory.<br />
TAPMATIC Can Also Supply A Tool STOP BLOCKS INTERCHANGEABLE INSERTS<br />
Ready To Fit Your Machine For Your For RDTXT. Page 45<br />
See Page 28<br />
Machine<br />
Page 48-49<br />
_____________________________________________________________________________________________________________________________________________<br />
ISO 9001 CERTIFIED: 802 CLEARWATER LOOP, POST FALLS, ID 83854, PHONE 800/854-6019, FAX: 208/773-3021, www.tapmatic.com<br />
19.
Change language