Technical Reference Guide - Lutron

Window Systems
Sivoia QEDTM
Quiet Electronic Drive
Technical Reference Guide
230V international | rev C

table of contents
SYSTEM SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . 1.1
Sivoia QED | system design benefits . . . . . . . . . . . . 1.2
Sivoia QED | one system does it all . . . . . . . . . . . . . 1.2
Sivoia QED | roller 64 system specifications . . . . . . . 1.3
Sivoia QED | roller 100 system specifications . . . . . . 1.4
Sivoia QED | wiring using power panels . . . . . . . . . . 1.5
power panel wiring | detail . . . . . . . . . . . . . . . . . . . . . 1.6
Sivoia QED | wiring using individual transformers . . . 1.7
COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1
Sivoia QED | electronic drive unit (EDU) . . . . . . . . . . 2.2
roller 64 | system components . . . . . . . . . . . . . . . . . . 2.3
roller 64 | brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4
roller 64 | specification . . . . . . . . . . . . . . . . . . . . . . . . 2.5
roller 64 | finishing options . . . . . . . . . . . . . . . . . . . . . 2.6
roller 100 | system components . . . . . . . . . . . . . . . . . 2.7
roller 100 | bracket configurations . . . . . . . . . . . . . . . . 2.8
roller 100 | bracket features . . . . . . . . . . . . . . . . . . . . 2.10
roller 100 | in-line coupled roller blinds . . . . . . . . . . . . 2.12
Sivoia QED keypads | available button layouts . . . . . 2.13
Sivoia QED | keypad accessories . . . . . . . . . . . . . . . 2.16
Sivoia QED | handheld infrared remotes . . . . . . . . . . 2.17
Sivoia QED | integration to Lutron lighting controls . . 2.18
accessories | optional infrared receivers . . . . . . . . . . . 2.19
Sivoia QED | power panel SVQ-10-PNL-230 . . . . . . 2.20
Sivoia QED | plug in transformers . . . . . . . . . . . . . . 2.21
INTEGRATION WITH LIGHTING CONTROL SYSTEMS . . . 3.1
GRAFIK Eye® | general system diagram . . . . . . . . . . . . 3.2
GRAFIK® 3000/4000 | system maximums . . . . . . . . . . 3.3
HomeWorks® | integration overview . . . . . . . . . . . . . . . 3.6
HomeWorks® | system maximums . . . . . . . . . . . . . . . . 3.7
HomeWorks® | wiring detail . . . . . . . . . . . . . . . . . . . . . 3.8
CURTAIN TRACK SYSTEMS . . . . . . . . . . . . . . . . . . . . . 4.1
introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2
straight track configurations . . . . . . . . . . . . . . . . . . . . 4.2
system components . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4
system dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5
Sivoia QED | curtain track capacity . . . . . . . . . . . . . 4.6
maximum capacities for straight tracks . . . . . . . . . . . . 4.6
hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7
measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11
hanging curtain fabric . . . . . . . . . . . . . . . . . . . . . . . . . 4.12
wiring (identical to other Sivoia QED systems) . . . . . 4.13
application examples . . . . . . . . . . . . . . . . . . . . . . . . . 4.14
application examples – centre-draw . . . . . . . . . . . . . . 4.15
Sivoia QEDTM Quiet Electronic Drive Window System
Technical Support :
+44-(0)20-7702-0657

Sivoia QEDTM
system specifications
SYSTEM SPECIFICATIONS
Sivoia QEDTM Quiet Electronic Drive Window System 1.1
Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
system design benefits
SYSTEM SPECIFICATIONS
Sivoia QED (Quiet Electronic Drive), a low-voltage system,
utilises a nearly silent electronic drive unit (EDU). The
control options for Sivoia QED include various styles of
intuitive wall-mounted keypads and handheld remote
controls to suit any need.
Simple System Design: Sivoia QED blinds or curtains can
be grouped together without the use of external "group
controls".
Ultra Quiet Operation: Blinds move as quietly as the
whisper of a gentle breeze. They are sound-rated at 44
dBA at 1 m (3 ft).
Maximise Window Coverage: Sivoia QED provides the
smallest possible light gaps between the fabric and the
window frame.
Precise Movement: Blinds move smoothly, in perfect
unison, and with exact alignment.
Intuitive Control Design: Easy-to-Read and Easy-to-Use
controls are immediately understood.
Convenience: Simplify your life by touching one button to
open or close multiple, tall, and hard-to-reach blinds.
Programmable Presets: The Sivoia QED electronic drive
unit (EDU) optimises blind and curtain adjustment by
offering programmable stop points. The EDU will track the
position of the blind or curtain and recall a preset level at
the touch of a button.
Reliability: Lutron Electronics has been the world leader in
the lighting control industry and the designer’s choice for
over 40 years.
Sivoia QED |
one system does it all
Sivoia QED technology seamlessly integrates
roller blinds and curtains into one intelligent
control system.
Sivoia QEDTM Quiet Electronic Drive Window System 1.2 Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
roller 64 system specifications
System Maximums
Devices
96 devices (includes electronic drive units (EDUs), keypads
and/or contact closure input interfaces)
Presets accuracy to within +/- 1.5mm (1/16”)
Group Controllers
None – Groups are created electronically and do not require
the use of an external group controller.
Infrared control
Optional infrared remote controls
System Dimensions
Tube Diameter
41mm
Roller Blind Maximum Weight
5.6 kg (including hembar)
Roller Blind Minimum Weight
2 kg (including hembar)
Minimum Roller Blind Width
560mm
Maximum Roller Blind Width 2.44m
Light Gaps
less than 20mm on each side; always symmetrical
Electronic Drive Unit Details
Sound Rating
44dBA at 1m
Ambient Temperature -10°C to 40°C
Maximum Torque
1.13 Nm
Rotational Speed
43 RPM
Minimum Brake Torque
4 Nm
Maximum Duty Cycle
30% (electronically limited)
Power Failure Memory
10 years
Power Supply
Input Voltage to Transformer
Output Voltage from Transformer
Maximum Current Consumption
220/240 VAC 50/60Hz
24VAC 50/60Hz
0.45A for a 100 VA transformer
Wiring Specifications
Communications Link 4 conductor, 2 twisted pair, shielded 1.0 mm 2
Power Supply to Electronic Drive Unit
3 conductor cable for power from transformer to the EDU
1.5-0.75mm2
Warranty
8 year limited warranty
SYSTEM SPECIFICATIONS
Sivoia QEDTM Quiet Electronic Drive Window System 1.3
Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
roller 100 system specifications
System Maximums
Devices
96 devices (includes electronic drive units (EDUs), keypads
and/or contact closure input interfaces)
Presets accuracy to within +/- 1.5mm (1/16”)
Group Controllers
None – Groups are created electronically and do not require
the use of an external group controller.
Infrared control
Optional infrared remote controls
SYSTEM SPECIFICATIONS
System Dimensions
Tube Diameter
66mm
Roller Blind Maximum Weight
8.6kg (including hembar)
Roller Blind Minimum Weight
2 kg (including hembar)
Minimum Roller Blind Width
610mm
Light Gaps
less than 20mm on each side; always symmetrical
Electronic Drive Unit Details
Sound Rating
44dBA at 1m
Ambient Temperature -10°C to 40°C
Maximum Torque
2.8Nm
Rotational Speed
26.7RPM
Nominal Brake Torque
17 Nm
Maximum Duty Cycle
30% (electronically limited)
Power Failure Memory
10 years
Power Supply
Input Voltage to Transformer
Output Voltage from Transformer
Maximum Current Consumption
220/240 VAC 50/60Hz
24VAC 50/60Hz
0.45A for a 100 VA transformer
Wiring Specifications
Communications Link 4 conductor, 2 twisted pair, shielded 1.0 mm 2
Power Supply to Electronic Drive Unit 3 conductor cable for power from transformer to the EDU
1.5-0.75mm2
See p. 1.4 of wiring and programming guide for complete specifications.
Warranty
8 years limited warranty
Sivoia QEDTM Quiet Electronic Drive Window System 1.4 Technical Support :
+44-(0)20-7702-0657

1 2 3 4
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
.75
Sivoia QED |
wiring using power panels
Optional
IR Receiver
Sivoia QED EDU
.75
to additional
Sivoia QED
EDUs
Sivoia QED EDU
to additional
Sivoia QED
EDUs
C
230Volt
feed
C
230 Volt
feed
SYSTEM SPECIFICATIONS
to other Sivoia
QED keypads
SVQ-10-PNL-230
A
A
SVQ-10-PNL-230
C
to Lutron
lighting
control
system
SG-SVC
SO-SVC
(Integration to Lutron
lighting control systems)
SVQ-CCI-8
Sivoia QED
Euro style
keypads
A Communications Link
B Power Wires
A
Sivoia QED
communications link
to other
SVQ-10-PNL-230
panels
4 Conductors
3 Conductors
C Comm/Power Combination
SVQ-CBL-250
7 Conductors
Sivoia QEDTM Quiet Electronic Drive Window System 1.5
Technical Support :
+44-(0)20-7702-0657

power panel wiring | detail
Note:
All internal components of the
Sivoia QED Power Panel are
pre-wired at the factory.
230VAC
wiring entry
from
distribution
panel
SYSTEM SPECIFICATIONS
.75
.75
.75
Custom seven-conductor
combination
communications/power
cable (SVQ-CBL-250), can
be used
to simplify wiring.
Wire up to 10 Sivoia QED
EDUs per panel.
(Maximum current draw of 4A per panel).
LED indicators power
at terminal block
Note: Power panel must be properly
earth-grounded.
Sivoia QEDTM Quiet Electronic Drive Window System 1.6 Technical Support :
+44-(0)20-7702-0657

1 2 3 4
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
Sivoia QED |
wiring using individual transformers
.75
Sivoia QED roller blind Sivoia QED roller blind Sivoia QED roller blind
.75
.75
24 V~ power supplies,
each powers one
Sivoia QED EDU.
24 V~
Power
Supply
B B B
A A A
European style keypads
to control EDUs
24 V~
Power
Supply
24 V~
Power
Supply
All components on one
communications link.
SYSTEM SPECIFICATIONS
To next keypad or
contact closure
interface or EDU
SVQ-CCI-8 contact
closure inputs to
communicate with
outside systems
Notes:
• A total of 96 devices, which include EDUs, keypads,
and/or CCIs, can operate simultaneously on the Sivoia
QED Link.
• When the number of keypads and CCIs in an
installation exceeds the number of Sivoia QED EDUs,
external keypad power supplies would be required.
A Communications Link
B Power Wires
4 Conductors
3 Conductors
Sivoia QEDTM Quiet Electronic Drive Window System 1.7
Technical Support :
+44-(0)20-7702-0657

Sivoia QEDTM
components
COMPONENTS
Sivoia QEDTM Quiet Electronic Drive Window System 2.1
Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
electronic drive unit (EDU) There are two models of EDU, the EDU 30 (for roller
The EDU is the brain of the Sivoia QED system. It
controls the movement of the roller blind, keeps track
of the blind’s position, and adjusts it to the
programmed positions as selected by the user.
100) and the EDU 10 (for roller 64). The EDU 10 offers
a slimmer profile, fitting a 41mm diameter roller tube.
Both EDUs feature identical wiring and programming.
Electronic Drive Features and Benefits:
• Ultra-Quiet operation: will not exceed 44 dBA measured
1 m (3 ft) from the EDU
• Smooth, silent starts and stops
• Seamless integration with Lutron lighting control
systems and other a/v equipment
• Integrates with most outside systems such as home
security or time clocks, without the use of external
group controls or relay systems
• Preset controls
• Ten year power failure memory
• Monitors blind position at all times
• 24 V~ low-voltage power allows Sivoia QED to be
installed by low-voltage contractors
• Blinds smoothly move in unison and stop in exact
alignment within ± 1.5 mm (1/16 in) accuracy
• Optional infrared system provides easy, convenient
control from anywhere in the room
COMPONENTS
EDU 64
EDU 100
Sivoia QEDTM Quiet Electronic Drive Window System 2.2 Technical Support :
+44-(0)20-7702-0657

LUTRON
1 2 3 4
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
roller 64 | system components
Exploded view
universal bracket
roller tube
idler
(diameter 41mm)
universal bracket (wall, ceiling & jamb mount)
terminal block
electronic drive unit
COMPONENTS
Open
OPEN
Preset
CLOSE
Close
Power and
Communications Panel
European
Style Keypads
seeTouchTM Keypads Infrared Remotes Contact Closure
Input Boards
Note: not to scale.
Sivoia QEDTM Quiet Electronic Drive Window System 2.3
Technical Support :
+44-(0)20-7702-0657

oller 64 | brackets
universal bracket design
• one-piece bracket for simple installation
• same bracket for left and right side of
roller tube
• one bracket for ceiling, wall and jamb installation
• roller tube installs with simple,
spring-loaded design
projection
adjustment
(using spacers)
vertical
adjustment
COMPONENTS
horizontal
adjustment
84mm (3.3”) maximum roll
width projection from wall
space requirements
The roller 64 system installs in a space 89mm
(3.5”) deep x 89mm (3.5”) high. The roll width
shown above illustrates a full 6m2 (64 square
foot) panel of the fabric 0.94mm (.037”) thick.
blind adjustment
During installation, each side of the blind
can be adjusted both horizontally and vertically
as well as in its projection off the
wall (using spacers provided).
Sivoia QEDTM Quiet Electronic Drive Window System 2.4 Technical Support :
+44-(0)20-7702-0657

oller 64 | specification
System dimensions | roller 64
The roller 64 utilises a 41mm roller tube to
operate up to 5.6m2 of fabric.
Pocket dimensions
Sivoia QEDTM roller 64 will never require more than
89mm height or 89mm depth for installation.
Front view
Top view
Dimensions
19mm (.75”)
76mm (3”) maximum
84mm (3.3”) maximum
55mm (2.175”)
41mm (1.67”)
8mm (.3”)
89mm (3.5”)
Specifications
• Low-voltage operation (24V ˜ )
• Ultra-quiet drive (44dBA at 1m)
• Roller tube size: 41mm diameter
• Minimum tube width: 560mm
• Maximum tube width: 2.44m
• Maximum fabric size: 5.6m2
• Installs with Sivoia QED universal one-piece
bracket (jamb, ceiling or wall mount)
• Bracket adjustments at three directions
• Light gaps: 19mm on both sides
• Intelligent Hembar AlignmentTM: uniform
movement and tracking with other Sivoia QED
blind systems (within ± 2mm)
• Elegant keypads and optional hand-held
infrared remotes
• Integration capability with Lutron lighting
control systems (HomeWorks® and
GRAFIK EyeTM)
COMPONENTS
Sivoia QEDTM Quiet Electronic Drive Window System 2.5
Technical Support :
+44-(0)20-7702-0657

oller 64 | finishing options
curved fascia
In addition to the square pocket shown on
page 1. Sivoia QED roller 64 can also be
installed using a curved fascia for a minimal
appearance in the window.
roller tube end caps
Provide a clean look for a system installed without fascia
or pocket. Available in white only.
square fascia end caps
Finished the look of the Sivoia QED roller 64
standard headbox.
dual-mounted roller blinds
C O M P O N E N T S
curved fascia end cap
A sleek, unobstructive look for Sivoia QED roller 64.
Dimensions
89mm (3.5”)
152mm (6.0”) (minimum)
99mm (3.9”)
159mm (6.25”)
178mm (7.0”)
83.82mm (3.3”) (minimum)
Sivoia QEDTM Quiet Electronic Drive Window System 2.6 Technical Support :
+44-(0)20-7702-0657

LUTRON
1 2 3 4
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
roller 100 | system components
exploded view of
wall mount system
wall mount bracket
idler and components
idler
wall mount bracket
roller tube diameter
terminal block
electronic drive unit
sub-bracket
sub-bracket
COMPONENTS
Open
OPEN
Preset
CLOSE
Close
Power and
Communications Panel
available in 120v and
230v configurations
Note: not to scale.
European
Style Keypads
seeTouchTM Keypads Infrared Remotes Contact Closure
Input Boards
Sivoia QEDTM Quiet Electronic Drive Window System 2.7
Technical Support :
+44-(0)20-7702-0657

oller 100 | bracket configurations
• Two-piece bracket design provides flexibility to adjust
blind symmetry over window opening without removing
the blind.
• The EDU mounts inside the left or right side of the
roller tube to accommodate different wiring needs.
• The two-piece bracket affords lateral adjustment,
leveling adjustment and projection adjustment both
during and after installation without removing the
roller tube.
COMPONENTS
Wall-mount Configuration
Ceiling-mount Configuration
Jamb/Recess Configuration
Dual-mount Configuration
Sivoia QEDTM Quiet Electronic Drive Window System 2.8 Technical Support :
+44-(0)20-7702-0657

oller 100 | bracket configurations
109 mm
(4.3 in)
127 mm
(5.0 in)
102 mm
(4.0 in)
84 mm
(3.307 in)
4 mm
(0.165 in)
132 mm
(5.20 in)
111 mm
(4.387 in)
fabric projection adjustable
from 30 – 43 mm (1.2 –
1.7 in)
note: shown as regular roll
Wall-mount Configuration
130 mm (5.125 in)
113 mm (4.44 in)
Ceiling-mount Configuration
178 mm
(7.0 in)
COMPONENTS
box not
provided
279 mm
(11.0 in)
119 mm
(4.69 in)
flap and
hanger
25 mm
(1.0 in)
glass
Jamb/Recess Configuration
Dual-mount Configuration
Sivoia QEDTM Quiet Electronic Drive Window System 2.9
Technical Support :
+44-(0)20-7702-0657

oller 100 | bracket features
Two-Piece Bracket
System Considerations
The sub-bracket mounts to the wall or ceiling before the
main unit is installed. The measurements below indicate
how to install the sub-bracket. If you know either the
system width (bracket-to bracket width) or the fabric
width, you can mount the sub-brackets.
System Width
19 mm
(0.75 in)
51 mm (2.0 in)
Fabric Width
51 mm (2.0 in)
19 mm
(0.75 in)
76 mm (3.0 in)
76 mm (3.0 in)
19 mm (0.75 in)
19 mm (0.75 in)
COMPONENTS
wall brackets shown
fabric edge
19 mm
(0.75 in)
system
edge
fabric edge indicator
wall bracket detail
Sivoia QEDTM Quiet Electronic Drive Window System 2.10 Technical Support :
+44-(0)20-7702-0657

oller 100 | bracket features
Two-Piece Bracket
Lutron has designed a bracket system to maximise ease
and flexibility of installation. The installer mounts a subbracket
to the wall, ceiling or jamb.
Roller Tube Leveling
The innovative Sivoia QED idler bracket contains a set
screw, which can be adjusted to raise and lower the idler
side of the roller within the bracket, allowing the blind to
be leveled easily without removing and re-mounting the
bracket.
sub-bracket
main bracket
leveling adjustment
screw
± 9.5 mm (3/8 in)
Blind Centring
The bracket allows for adjustment of 9.5 mm (3/8 in) in
either direction and locks in place with the set screw.
Projection Adjustment
The roller tube can also be adjusted away from or
toward the wall, without having to be re-mounted. This
helps ensure the blind clears any window hardware or
trim. The bracket allows the tube to be adjusted up to
13 mm (1/2 in) forward or backward and is again
secured with a set screw.
COMPONENTS
adjust roller
tube laterally to
centre blind
± 9.5 mm (3/8 in)
± 13 mm (1/2 in)
projection
adjustment
Sivoia QEDTM Quiet Electronic Drive Window System 2.11
Technical Support :
+44-(0)20-7702-0657

oller 100 | in-line coupled roller blinds
COMPONENTS
Coupled blinds may provide a means to reduce the total
installed cost of the Sivoia QED system. The number of
EDUs on a job may be reduced where independent
control of adjacent blinds is not needed. With a
reduction in the number of EDUs there will be an equal
reduction in power supplies and wiring. This may also
simplify the programming and setup of the job.
In an in-line coupled system, one EDU is lifting up to
three fabric panels. The EDU can lift approximately 10 m 2
(100 ft 2 ) of fabric. For a specific application, please
consult your local Lutron fabricator.
With the in-line coupled system, up to three blind panels
can be operated from a single EDU. A coupling pin
provides for phase adjustment that allows the installer to
adjust the hembar alignment after installation and
without removing the fabric panels from the tube.
Likewise, the in-line coupled system provides the same
leveling, blind centring, and projection adjustment that is
provided on the single roller Sivoia QED blind. Also, inline
coupling is supported for all three mounting
conditions: wall, ceiling, and jamb/recess. Fabric gaps
are shown in the illustration below.
System Width System Width System Width
19 mm (3/4 in) 38 mm (1.5 in) 38 mm (1.5 in) 19 mm (3/4 in)
Fabric Width Fabric Width Fabric Width
Sivoia QEDTM Quiet Electronic Drive Window System 2.12 Technical Support :
+44-(0)20-7702-0657

Sivoia QED keypads | available button layouts
EUROPEAN STYLE
Choose from five keypad styles for
Sivoia QED.
Functionality includes:
1. full open/full close
2. raise/lower fine-tuning
3. movement to programmable
preset positions
4. selection of groups of EDUs for increased
functionality
5. infrared reception
6. “stop if moving” from any button
Dimensions:
width: 86mm
height: 86mm
depth (with backbox): 21mm
SQE-2N:
Two button keypad
with full open/full close
1
COMPONENTS
2
3
SQE-RLN:
SQE-3EN:
SQE-3DN:
SQE-33N:
keypad
with fine-tune
raise/lower and
automatic full open or
close with a four-second
button press
keypad with open/
preset/close, raise/lower
and infrared reception
keypad with open/
preset/close for dualmounted
or two group
applications
keypad with open/
preset/close, raise/lower
for three group
applications
Sivoia QEDTM Quiet Electronic Drive Window System 2.13
Technical Support :
+44-(0)20-7702-0657

Sivoia QED keypads | available button layouts
SeeTouchTM keypads
This exclusive Lutron design offers backlit, ergonomic buttons, customeized engraving and complements any décor.
Architectural
• available in insert and non-insert models
• sharp outside corners and beveled outside
edges
• available in matt plastic and metal finishes
Dimensions:
width: 69.85mm (2.75”)
height: 117.48mm (4.625”)
depth: 28.70mm (1.13”)
insert version
non-insert version
COMPONENTS
SVQ-2WRL:
SVQ-3WRL:
SVQ-3W:
SVQ-2W:
Two button keypad
with raise/lower
Three button keypad
with raise/lower
Three button keypad
Two button keypad
Sivoia QEDTM Quiet Electronic Drive Window System 2.14 Technical Support :
+44-(0)20-7702-0657

Sivoia QED keypads | available button layouts
SVQ-4WRL-IR:
Four button keypad
with raise/lower and
infrared reception
SVQ-5WRL:
Five button keypad
with raise/lower
COMPONENTS
SVQ-2WD:
Four button keypad for
dual-mount or two group
applications
SVQ-3WD:
Six button keypad for
dual-mount or two group
applications
Sivoia QEDTM Quiet Electronic Drive Window System 2.15
Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
keypad accessories
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
Dimensions for
Enclosure
W: 133 mm (5.25 in)
(146 mm (5.75 in)
with cover)
H: 260 mm (10.25 in)
(273 mm (10.75 in)
with cover)
D: 51 mm (2.0 in)
SVQ-CCI-8
•
Performs similar functions to keypads - receives eight
contact closure inputs and sets presets, programs
EDUs, etc
•
Access user-programmable presets/scenes or stop
•
Utilises low-voltage, dry contact closure inputs to
interface with non-Lutron A/V equipment
•
LEDs provide feedback
•
Receives IR commands
1 2 3 4
COMMON
INPUT
COMMON
INPUT
•
Receives power and communication on 4-wire Sivoia
QED communication bus
•
Ships in enclosure, ready for installation
• See pg. 2.44 of the Sivoia QED Wiring and
Programming Guide (p/n 045-101-12 rev A) for
information on how to access multiple groups of EDUs
from a CCI
• Terminal blocks accommodate 1.5-0.5mm
2
(14-22AWG) wire
COMPONENTS
Sivoia QEDTM Quiet Electronic Drive Window System 2.16 Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
handheld infrared remotes
Convenient hand-held remotes to send infrared control
signals to receivers either built into keypads or mounted
directly at the electronic drive unit. All remotes available
in white only.
SVQ-OCIT:
SVQ-3PIT:
Open/Close Handheld
IR Transmitter
Three Preset Handheld
IR Transmitter
SVQ-4GD-OCIT:
SVQ-4S2G-IT:
COMPONENTS
OPEN
CLOSE
SHADE
Both
Multi-function
Handheld Infrared
Transmitter
SHADES
OPEN
CLOSE
SHADES
1
Both
Multi-function Lights
and Window Treatment
Handheld Infrared
Transmitter
2
WINDOW
LIGHTS
1 2 All
1
2
Off
3 4
3
4
Sivoia QEDTM Quiet Electronic Drive Window System 2.17
Technical Support :
+44-(0)20-7702-0657

ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
Sivoia QED |
integration to Lutron lighting controls
Integration Accessories
Features
HWI-Q96
SOLosTM Integrator
Coopersburg, PA 18036 USA
For use with Lutron HomeWorks and Sivoia QED systems only.
PELV (CLASS 2: USA)
To HomeWorks
Processor H48
Link
Heartbeat
TX
RX
1 2 3 4
COM
+V
MUX
MUX
HWI-Q96 HomeWorks
Address Settings
1
2
3
4
To Sivoia QED
Communication
Link
ALL OPEN
ALL CLOSE
QED Link
TX
RX
1 2 3 4
COM
+V
MUX
MUX
HWI-Q96:
HomeWorks®
control for
Sivoia QED
• Provides two-way communication between HomeWorks
and Sivoia QED systems
• Compatible with 4 series and 8 series HomeWorks
processors
• A low-voltage component that can be placed in any
HomeWorks HWI-LV-17, HWI-LV-24, or HWI-LV-32
enclosures
• Operate all EDUs, groups of EDUs, or single EDUs from
HomeWorks Keypads or RS-232 port on HWI processor
Dimensions
W: 79 mm (3.125 in)
H: 142 mm (5.60 in)
D: 51 mm (2.00 in)
COMPONENTS
Open
Preset 1
Preset 2
Preset 3
Close
SG-SVC:
SO-SVC
GRAFIK® Systems
Control for
Sivoia QED
• Provides communication between GRAFIK 3000 or
GRAFIK 4000 Sivoia QED system (SG-SVC) and Grafik
5000, 6000, and 7000 systems (SO-SVC).
• Allow one zone on the GRAFIK Eye main unit for each
SG-SVC or SO-SVC.
• Does not occupy a GRX main unit address or accessory
control address
• Operates all Sivoia QED EDUs on the
communication link
• Mounts in Lutron supplied wallbox
Product Dimensions
W: 70 mm (2.75 in)
H: 117 mm (4.625 in)
D: 29 mm (1.13 in)
Sivoia QEDTM Quiet Electronic Drive Window System 2.18 Technical Support :
+44-(0)20-7702-0657

.75 .75"
accessories | optional infrared receivers
Remote IR Eye
Lutron offers a remote infrared eye for Sivoia QED. It is a
small dome connected to the EDU by a thin 560 mm (22 in)
cable. Extensions of 3 m (10 ft) lengths are available if the
layout requires the IR eye to be located further from the
EDU. Unobtrusive mounting clips and adhesive tape are also
provided.
Use only one IR receiver per room.
SV-IR
Infrared remote eye, available
in white and royal plum
Remote IR Eye
(not shown to scale,
has a diameter of
25 mm (1.0 in))
COMPONENTS
3 m (10 ft)
SV-IR connects to
optional extension
cable (SV-IR-EXT-10)
or directly to EDU
SV-IR-EXT-10
Sivoia QEDTM Quiet Electronic Drive Window System 2.19
Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
power panel SVQ-10-PNL-230
Sivoia QED power panels simplify the wiring and
organise installations that require multiple transformers.
The power panel consists of a 10 output transformer, 10
fuses (one per output) and a wire landing board.
Each panel has 10-7 pin connectors for EDUs. Each
connector is supplied with power for an EDU. The panel
contains a bus that connects the four communication
link wires from each EDU together. It is recommended to
home-run both EDU and keypad wiring to the power
panel. The panel accommodates home run wiring with
seven-pin EDU connectors for up to ten EDUs.
Note: Maximum feed breaker size of 30 Amps. Each
terminal block will accept one 0.75-6mm 2 wire.
Please see the Wiring and Programming Guide (p/n
045-101-12a) for specific gauges and limitations.
Power panels must be grounded for safe operation
and installed by a licensed electrician adhering to all
local and national codes.
Note: The SVQ-10-PNL-230 internally connects the
four communications wires landed at each of the
seven-pin connectors.
Maximum current draw is 4A per panel. Maximum of
two power panels per 10amp breaker.
24.13 cm
COMPONENTS
26.16 cm
9.91 cm
44.45 cm
Note: also available in 120v.
Sivoia QEDTM Quiet Electronic Drive Window System 2.20 Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
plug in transformers
89 mm
75 mm 120 mm
Dimensions for
plug in transformer
W: 75 mm (2.95 in)
H: 85 mm (3.35 in)
D: 120 mm (4.73 in)
UK VERSION
Plug in transformer
•
Input Voltage: 230-240V, 50Hz
•
Output voltage: nominal 24v AC RMS,
100 VA maximum
•
Three prong Schuko style plug
•
Contact customer service for
more information
89 mm
Dimensions for
plug in transformer
EU VERSION
Plug in transformer
W: 75 mm (2.95 in)
•
Input Voltage: 230-240V, 50Hz
75 mm
120 mm
H: 85 mm (3.35 in)
D: 120 mm (4.73 in)
•
Output voltage: nominal 24v AC RMS,
100 VA maximum
•
Two prong European style plug
•
Contact customer service for
more information
COMPONENTS
Sivoia QEDTM Quiet Electronic Drive Window System 2.21
Technical Support :
+44-(0)20-7702-0657

Sivoia QEDTM
integration with Lutron
lighting control systems
INTEGRATION
Sivoia QEDTM Quiet Electronic Drive Window System 3.1
Technical Support :
+44-(0)20-7702-0657

.75 .75"
.75 .75"
.75 .75"
.75 .75"
GRAFIK | Eye® general system diagram
System wiring is shown with two GRAFIK Eye Sivoia QED
interfaces (SG-SVC) to provide control of two groups of
Sivoia QED EDUs independently.
to lighting loads
GRAFIK Eye wall station
GRX350X-X-XX-CPN1622
A
EGRX-4S-IR
SG-SVC keypads
B
C
24 V~
Power
Supply
AC
AC GRD
24 V~
Power
Supply
AC GRD AC
INTEGRATION
24 V~
Power
Supply
AC
AC GRD
24 V~
Power
Supply
AC GRD AC
A GRAFIK Communications Link 4 conductors
B Sivoia QED Communication Link 4 conductors
C Power Wiring 3 conductors
Sivoia QEDTM Quiet Electronic Drive Window System 3.2
Technical Support :
+44-(0)20-7702-0657

GRAFIK® 3000/4000 | system maximums
Control units 8 8
Zones per control unit 6 24
Total zones per system 48 64
A Grafik Eye Sivoia QED interface uses 1 zone within
the Grafik Eye
Wall Stations 16
Window System interfaces 8
For Sivoia QED, use the Sivoia QED interfaces
SG-SVC
Maximum EDUs per Sivoia QED interface 96
Sivoia QED window systems interface for Grafik Eye
Interface for Sivoia QED
SG-SVC is addressed manually
Addressing
Grafik Eye and Grafik Eye wallstations are addressed
manually
Sivoia QED components are addressed in Sivoia QED
programming mode automatically
Low Voltage Wiring See page 3.2
Wiring configurations
Grafik Eye Link – Daisy Chain
Sivoia QED Link – T-tap, daisy chain, home-run
Setting Limits
Limits can be set from the EDU, a Sivoia QED keypad or
a Sivoia QED handheld infrared remote control
Power
The SG-SVC is powered by the 24V~ Sivoia QED power
supply
Sivoia QED Controllability from Grafik Eye 3000
GRX 3000 GRX 4000
Scene Control
A Grafik Eye wall station selects scenes on a control unit.
For each Grafik Eye scene, a lighting zone can be
programmed from 0-100% and as unaffected. A
Sivoia QED zone can be programmed as:
• Open
• Preset 1
• Preset 2
• Preset 3
• Close
• Unaffected
Zone Control
A Grafik Eye window treatment wall station provides an
additional point of control for a single EDU or group of
EDUs connected to a SG-SVC interface, without affecting
the lighting scenes. A Sivoia QED zone can be adjusted as:
• Open
• Preset 1
• Preset 2
• Preset 3
• Close
• Stop
• Raise/Lower
INTEGRATION
Sivoia QEDTM Quiet Electronic Drive Window System 3.3
Technical Support :
+44-(0)20-7702-0657

GRAFIK® 3000/4000 | system maximums
A GRAFIK power link 3 conductors
B GRAFIK Communications link 4 conductors
C Sivoia QED communication link 4 conductors
D Sivoia QED power wiring 3 conductors
230V
DISTRIBUTION
PANEL
A
ZONE 2
ZONE 4
ZONE 6
HOT/LIVE
SSA
CU WIRE ONLY
Class 2
1 2 3 4
USA
CLASS 2
IEC
PELV
ZONE 1
ZONE 3
ZONE 5
NEUTRAL
to dimmed
lighting loads
GRX-310X-CE-XX
B
To other
Grafik Eye
keypads
MUX
COM
MUX
AC
AC
4 MUX
3 MUX
2 +V
1 COM
Sivoia QED
EDU Terminal Block
Common
12V
MUX
MUX
AC
AC
EGND
SG-SVC (Back)
C
INTEGRATION
24 V~ Power
Supply
AC
Earth Ground
AC
D
D
to next
EDU or
keypad
Sivoia QEDTM Quiet Electronic Drive Window System 3.4
Technical Support :
+44-(0)20-7702-0657

GRAFIK® 3000/4000 | system maximums
Grafik Eye Main Units
Maximum 8
GRX-3102
GRX-3103
GRX-3104
GRX-3106
GRX-3502
GRX-3503
GRX-3504
GRX-3506
Grafik Integrale currently does
support window treatment
interfaces
Grafik Eye Accessory
Controls
Maximum 16 wall stations, interfaces
and/or window treatment controls
Wall Stations
NTGRX-4S
EGRX-4S
SG-4SN
See Grafik Eye catalogue for complete
listing
Interfaces
GRX-PRG
GRX-CI-NWK-E
GRX-CCO-8 (when addressed for AV
or other contact closure equipment)
See Grafik Eye catalogue for complete
listing
Window Treatment
Wall Stations
SG-2W
SG-3W
SG-3WRL
SG-WD
SG-5WRL
Grafik Eye Window Treatment
Interfaces
Maximum 8
Sivoia QED interface
SG-SVC
GRAFIK Eye AC Group
Controllers
GRX-4M-GC-CE
GRAFIK Eye contact closure
output
GRX-CCO-8
INTEGRATION
Sivoia QEDTM Quiet Electronic Drive Window System 3.5
Technical Support :
+44-(0)20-7702-0657

| HomeWorks® integration overview
HomeWorks
processor
A Communication Link
B Comm/Power Combination
SVQ-CBL-250
C HomeWorks Link*
4 Conductors
7 Conductors
H48/Q96 Link
*Please refer to HomeWorks Technical Reference Guide
Addendum (p/n 366-945/EA) for full specification of this
cable.
HWI-Q96
B
C
A
• Sivoia QED EDUs can be controlled
directly from the HomeWorks 4 or 8 series
processor using HWI-Q96 integrator.
• Control up to 96 EDUs.
• Each EDU counts as a zone on the
HomeWorks processor.
• Sivoia QED keypads may be used but count
against the 96 device limit. Sivoia QED
keypads cannot be programmed using the
HomeWorks processor.
INTEGRATION
SVQ-10-PNL-230
.75
.75
.75
Sivoia QED EDUs
Sivoia QEDTM Quiet Electronic Drive Window System 3.6
Technical Support :
+44-(0)20-7702-0657

| HomeWorks® system maximums
System Maximums
Zones per HomeWorks Processor
Processors per system
Zones per system
EDUs per HWI-Q96 interface
HWI-Q96 interfaces per H48/Q96 Link
Link 4, 5, 6 (or 8 in 8 series only) can be configured as
a H48/Q96 Link
256
Each EDU uses one zone of the HomeWorks system
16
4096
96
4 total interfaces (H48 and/or HWI-Q96)
Maximum 1 H48/Q96 link per HomeWorks processor
Sivoia QED interface for HomeWorks
Interface for Sivoia QED
Addressing
Low Voltage Wiring
Wiring configurations – HomeWorks Link
Wiring Configurations – Sivoia QED Link
Setting Limits
Power
Sivoia QED Controllability for HomeWorks
HWI-Q96
Connects to configurable link configured as an H48/Q96
Link
• Installs in any low voltage enclosure
• A second HWI-Q96 is only required when the total
number of EDUs per system exceeds 96
HWI-Q96 interface addresses with dip switches
EDUs are addressed via serial addressing in the Home-
Works software
See page 3.8
Daisy chain ONLY between processor and interface –
max 305m cable
Refer to HomeWorks Technical Reference Guide
Daisy chain or home-run EDUs to power panel
(maximum 305m per single run
Maximum 1220m total wire distance for Sivoia QED link
Refer to Sivoia QED Wiring and Programming Guide (p/n
045-101-12 rev A)
Limits can be set from the EDU or from the HomeWorks
Software
The HWI-Q96 is powered by the Sivoia QED link
• Lighting and Sivoia QED zones can be programmed
at any level between 0% - 100%.
• For Sivoia QED, 0% equals fully closed and 100%
equals fully open
• Any EDU in the system can be programmed to any
HomeWorks keypad in the system at any level
• Sivoia QED zones can be included in security mode,
vacation mode and scene save programming
• Sivoia QED zones can also be controlled via RS232
and will provide system feedback to the processor
• Sivoia QED keypads may be used but count against
the 96 device limit
• Sivoia QED keypads cannot be programmed using the
HomeWorks software
INTEGRATION
Sivoia QEDTM Quiet Electronic Drive Window System 3.7
Technical Support :
+44-(0)20-7702-0657

| HomeWorks® wiring detail
Sivoia QED to HomeWorks
This detail illustrates the wiring of the
Sivoia QED system to the HWI-Q96
component.
This allows HomeWorks to directly
control any EDU or group of EDUs
within the entire Sivoia QED system.
HomeWorks
Processor
C
HWI-Q96
A
EDU
Common
12V
MUX
MUX
AC
AC
EGND
CURTAIN
Terminal
Block
B
INTEGRATION
A Communication Link
B Comm/Power Combination
SVQ-CBL-250
C HomeWorks Link
Sivoia QEDTM Quiet Electronic Drive Window System 3.8
Technical Support :
+44-(0)20-7702-0657

Sivoia QEDTM
curtain track systems
CURTAIN
Sivoia QEDTM Quiet Electronic Drive Window System 4.1
Technical Support :
+44-(0)20-7702-0657

introduction
• Sivoia QED curtains are designed for use with pinchpleat
fabrics.
• The Sivoia QED curtain system wiring is identical to
other Sivoia QED systems.
• Standard Sivoia QED controls, interfaces and power
supply can be used with the Sivoia QED Curtain
system.
• The Sivoia QED curtain system interfaces to Lutron
and other manufacturer's equipment in the same
manner as other Sivoia QED roller blind systems.
• The programming is identical to other Sivoia QED
products.
• The curtain carriers can be loaded and unloaded
without disassembly.
CURTAIN
straight track configurations
• The Sivoia QED curtain system is available with straight tracks.
• Sivoia QED curtain track is available in both left and right motor configurations allowing left stack, right stack and
centre-draw systems.
Left draw/ Left-Mounted EDU
Right draw/ Right-Mounted EDU
Centre-draw, Left- or Right-
Mounted EDU
Sivoia QEDTM Quiet Electronic Drive Window System 4.2
Technical Support :
+44-(0)20-7702-0657

ONE WAY DRAW
(LEFT OR RIGHT STACK AVAILABLE)
CENTRE DRAW
System Width
System Width
Stack Back
Stack Back
Stack Back
Max System Width = 5.5 m (18 ft)
Stack back = 1/3 System Width
Curtain Speed: 152 mm/sec (6 in/sec)
Max System Width: 5.5 m (18 ft) (see two-motor systems
for wider widths)
Stack back = 1/6 System Width on each side (1/3 total)
Curtain Speed: 152 mm/sec (6 in/sec)
Specify the motor side when ordering a centre-open
system
CURTAIN
right-draw one-way system
centre-draw system
left-draw one-way system
Sivoia QEDTM Quiet Electronic Drive Window System 4.3
Technical Support :
+44-(0)20-7702-0657

system components
EXPLODED VIEW ONE WAY DRAW
Curtain
Track Belt
Curtain
Track
Gear Box
(shaded
for illustrative
purposes only)
Electronic Drive
Unit (EDU)
Auxiliary Cars
Idler End Cap
Pre-assembled right
standard master car
CURTAIN
EXPLODED VIEW CENTRE-DRAW
Gear Box
(shaded
for illustrative
purposes only)
Curtain
Track Belt
Curtain
Track
Electronic Drive
Unit (EDU)
Idler End Kit
End Hook
Auxiliary Cars
2 Pre-assembled right
standard master cars
Sivoia QEDTM Quiet Electronic Drive Window System 4.4
Technical Support :
+44-(0)20-7702-0657

system dimensions
ONE-WAY DRAW SIDE VIEW
System Width (application-dependent 5.5 m (18 ft) max.)
213 mm
(8.375 in)
RIGHT, LEFT, CENTRE-DRAW
ELECTRONIC DRIVE UNIT END VIEW
95 mm
(3.75 in)
51 mm (2.0 in)
CURTAIN
ONE-WAY DRAW TOP VIEW
32 mm (1.25 in)
51 mm
(2.0 in)
41 mm (1.625 in)
Sivoia QEDTM Quiet Electronic Drive Window System 4.5
Technical Support :
+44-(0)20-7702-0657

Sivoia QED |
curtain track capacity
Curtain materials and construction techniques can vary
widely. The size of the curtain that can be used with the
Sivoia QED curtain track depends primarily on the total
fabric weight of the curtains being used. The chart
below provides some rules of thumb for track capacity
based on the complete weight of a curtain (weight given
includes face fabric, lining and top bottom and side
hems based and is calculated based on a fullness of
2.5:1). Use this chart to quickly determine if a given
curtain can be driven with the Sivoia QED curtain
system.
TRACK CAPACITY CHART
Typical Sheer Curtain-
136 - 203 g/m 2
(4 - 6 oz/yd 2 )
136 g/m 2 (4 oz/yd 2 )
Height Total fabric weight
Typical Blackout Curtain with Lining-
406 - 542 g/m 2
(12 - 16 oz/yd 2 )
406 g/m 2 (12 oz/yd 2 )
Total fabric weight
542 g/m 2 (16 oz/yd 2 )
Total fabric weight
813 g/m 2 (24 oz/yd 2 )
Total fabric weight
1828 mm
(72 in) tall
Up to 5.5 m (18 ft) wide
Up to 5.5 m (18 ft) wide
Up to 4.5 m (15 ft) wide
Up to 3.6 m (12 ft) wide
2438 mm
(96 in) tall
Up to 5.5 m (18 ft) wide
Up to 5.5 m (18 ft) wide
Up to 4.5 m (15 ft) wide
Up to 2.1 m (7 ft) wide
3651 mm
(144 in) tall
Up to 5.5 m (18 ft) wide
Up to 4.2 m (14 ft) wide
Up to 2.7 m (9 ft) wide
N/A
CURTAIN
maximum capacities for straight tracks
Use this chart to determine the maximum fabric weight
the Sivoia QED curtain system can operate, based upon
system width.
Single Motor System
Width
m (ft)
Weight
kg (lbs)
0.9–2.7
(3–9)
3–3.9
(10–13)
4.2–5.5
(14–18)
36.3 (80) 31.8 (70) 27.2 (60)
Two Motor Split Tandem System
Width
m (ft)
Weight
for both panels
kg (lbs)
1.8–5.5
(6–18)
5.8–7.9
(19–26)
8.2–11
(27–36)
72.6 (160) 63.5 (140) 54.4 (120)
Sivoia QEDTM Quiet Electronic Drive Window System 4.6
Technical Support :
+44-(0)20-7702-0657

hardware
TRACK MOUNTING TO WALL
Mount the curtain track to the wall using the wall mount “L” brackets. Mount the brackets using the spacing illustrated
below. Mount each end bracket 152 mm (6 in) from each end of the track. Space the next bracket on both sides
406 mm (16 in) from the end brackets. Space the remaining brackets 406–609 mm (16-24 in) apart. Mount into
studs everywhere possible. Use appropriate hardware.
Window/Wall Side
152 mm
(6 in)
406 mm
(16 in)
406–609 mm
(16–24 in)
406–609 mm
(16–24 in)
406 mm
(16 in)
152 mm
(6 in)
WALL-MOUNTED BRACKET
The wall-mounted bracket provides variable adjustment
from 114–171 mm (4.50–6.75 in) from the mounting
surface. Cam locking clips are used to attach the
brackets to the track as shown in the assembled side
view below.
CURTAIN
Sivoia QEDTM Quiet Electronic Drive Window System 4.7
Technical Support :
+44-(0)20-7702-0657

hardware
WALL-MOUNTED BRACKET
ASSEMBLED SIDE VIEW
108 mm
(4.25 in)
70 mm
(2.75 in)
31 mm
(1.22 in)
41 mm
(1.625 in)
32 mm
(1.25 in)
108 mm
(4.25 in)
CURTAIN
EXTENDED BRACKET
ASSEMBLED SIDE VIEW
172 mm
(6.75 in)
70 mm
(2.75 in)
31 mm
(1.22 in)
41 mm
(1.625 in)
152 mm
(6.0 in)
Sivoia QEDTM Quiet Electronic Drive Window System 4.8
Technical Support :
+44-(0)20-7702-0657

hardware
WALL-MOUNTED BRACKET
DUAL-MOUNT - ASSEMBLED SIDE VIEW
248 mm
(9.75” in)
31 mm
(1.22 in)
41 mm
(1.625 in)
118 mm
(4.625 in)
89 mm
(3.5 in)
229 mm
(9.0 in)
WALL-MOUNTED BRACKET - EXTENDED
DUAL-MOUNT - ASSEMBLED SIDE VIEW
311 mm
(12.25 in)
CURTAIN
31 mm
(1.22 in)
41 mm
(1.625 in)
118 mm
(4.625 in)
152 mm
(6.0 in)
292 mm
(11.5 in)
Sivoia QEDTM Quiet Electronic Drive Window System 4.9
Technical Support :
+44-(0)20-7702-0657

hardware
TRACK MOUNTING TO CEILING
Mount the curtain track to the ceiling using the cam lock brackets. Mount the brackets using the spacing guidelines
shown below. Mount one bracket 152 mm (6 in) in from each side of the track. Space the next bracket on both sides
406 mm (16 in) from the end brackets. Space the remaining brackets 406–609 mm (16-24 in) apart. Mount into
studs everywhere possible. Use appropriate hardware.
Window/Wall Side
152 mm
(6 in)
406 mm
(16 in)
406–609 mm
(16–24 in)
406–609 mm
(16–24 in)
406 mm
(16 in)
152 mm
(6 in)
CEILING-MOUNTED BRACKET
The ceiling mount option uses only the locking clip
screwed directly to the ceiling mounting surface.
CEILING-MOUNTED BRACKET - EXPLODED VIEW
CURTAIN
Ceiling
Mounting
Surface
29 mm
(1.15 in)
32 mm
(1.25 in)
TOP VIEW OF CLIP ARM EXTENDED
IN UNLOCKED POSITION
Track
Unlocked
Sivoia QEDTM Quiet Electronic Drive Window System 4.10
Technical Support :
+44-(0)20-7702-0657

measuring
SYSTEM WIDTH
• Installed curtain covers both end caps so the track
width equals the full system width as shown below.
System Width
MEASURING FOR MINIMUM
RECOMMENDED OVERLAP
• Determine the width of the system required for your
application by measuring the widest part of your
window opening. Curtains should overlap the window
you are treating in most cases by a minimum of three
inches on each side. When using the minimum overlap,
the stack back of a fully-open curtain will cover a
portion of the window area.
MEASURING FOR COMPLETE
WINDOW REVEAL
• To completely reveal a window when the curtain is
open the stack back on the curtain must be
considered. Consult stack diagrams for stack back
dimensions.
• In addition be aware that depending on the
construction and material the curtain will be slightly
wider at the bottom than at the top.
LEFT OR RIGHT STACK
System Width
CENTRE-DRAW CENTER STACK
System Width
CURTAIN
Stack=
Approximately 1/3
(system width)
Each Stack=
Approximately
1/6 (system
width)
Sivoia QEDTM Quiet Electronic Drive Window System 4.11
Technical Support :
+44-(0)20-7702-0657

hanging curtain fabric
CURTAIN HOOK SETTING
For the best system performance, a curtain hook setting
of 13 mm (1/2 in) should be used. This allows the
system to operate with minimal noise.
13 mm
(0.50 in)
CURTAIN FABRIC RETURN
CURTAIN
101–165 mm (4.0–6.5 in)
(depends on wall mount
bracket extension)
Sivoia QEDTM Quiet Electronic Drive Window System 4.12
Technical Support :
+44-(0)20-7702-0657

wiring (identical to other Sivoia QED systems)
Common
12V
MUX
MUX
AC
AC
EGRD
Common
12V
MUX
MUX
AC
AC
EGRD
female EDU
connector
female EDU
connector
B
A
4
3
2
1
shield
24 V~ Power
Supply
24 V~ Power
Supply
CURTAIN
AC
Earth Ground
AC
AC
Earth Ground
AC
Lutron Sivoia QED
seeTouch keypad
(BACK)
Wire each Sivoia QED EDU to a 24 V~ power supply.
Each EDU must be EARTH grounded. Each
power supply can power ONLY ONE EDU, regardless
of curtain size.
A
B
Communications Link
Power Wires
4 Conductors
3 Conductors
Sivoia QEDTM Quiet Electronic Drive Window System 4.13
Technical Support :
+44-(0)20-7702-0657

SECTIONB-B
SECTIONA-A
SECTIONA-A
application examples
USE THE FOLLOWING APPLICATION
EXAMPLES TO HELP LAY OUT YOUR PROJECT
Single curtain track
• It is important to maintain enough clearance between
the track and the inside face of the top treatment or
ceiling recess to allow the fabric to move freely within
the top treatment. All measurements shown below are
minimums.
89 mm
(3.5 in)
140 mm (5.5 in)
51 mm
(2.0 in)
51 mm (2 in)
25 mm (1.0 in) 25 mm (1.0 in)
89 mm (3.5 in)
CURTAIN
Dual-Mount curtain track
• Sivoia QED tracks can be used for a combination
sheer/blackout treatment. These systems will require
more clearance than a single track system.
89 mm (3.5 in)
108 mm (4.25 in)
235 mm (9.25 in)
184 mm (7.25 in)
51 mm
(2.0 in)
248 mm
(9.75 in)
25 mm (1.0 in)
51 mm (2.0 in)
25 mm (1.0 in)
Sivoia QEDTM Quiet Electronic Drive Window System 4.14
Technical Support :
+44-(0)20-7702-0657

SECTION
B-B
SECTION SECTIONB-B
SECTION
A-A
SECTION SECTIONA-A
application examples – centre-draw
Tandem Curtain Track Systems
• Unlike standard motorised curtain systems the Sivoia
QEDTM EDU controls the speed of your curtains with
extreme precision. This allows two independent EDUs
to be used to create a centre-open curtain. All
measurements shown below are minimums.
140 mm (5.5 in)
89 mm (3.5 in)
51 mm (2.0 in)
25 mm (1.0 in) 25 mm (1.0 in)
51 mm (2.0 in)
89 mm (3.5 in)
Curtain Track Corner Application
• Sivoia curtain track can be used in corner applications.
CURTAIN
Sivoia QEDTM Quiet Electronic Drive Window System 4.15
Technical Support :
+44-(0)20-7702-0657

To Contact Lutron:
WORLD HEADQUARTERS
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036
United States
Tel: +1-610-282-3800
Fax:+1-610-282-1243
EUROPEAN HEADQUARTERS
Lutron EA Ltd.
6 Sovereign Close
London, E1W 3JF
United Kingdom
Tel: +44-(0)20-7702-0657
Fax: +44-(0)20-7480-6899
CUSTOMER SERVICE/ORDERING
UK +44-(0)20-7702-0657 – 09.00 - 18.00 GMT
USA +1-800-446-1503 – 08.00 - 20.00 EST
CUSTOMER SERVICE/E-MAIL
eacustsvc@lutron.com
TECHNICAL SUPPORT & SERVICES
UK +44-(0)20-7702-0657 – 09.00 - 18.00 GMT
USA +1-800–523-9466 – 24 hours/7 days
INTERNET
www.lutron.com
ADDITIONAL LUTRON SALES OFFICES LOCATED IN :
United Kingdom Tel: +44-(0)20-7702-0657 Fax: +44-(0)20-7480-6899 FREEPHONE (UK) 0800-282-107
Germany Tel: +49-309-710-4590 Fax: +49-309-710-4591 FREEPHONE 00800-5887 6635
France Tel: +33-(0)1-44-70-71-86 Fax: +33-(0)1-44-70-70-97 FREEPHONE 0800-90-12-18
Spain-Madrid Tel: +34-91-567-84-79 Fax: +34-91-567-84-78 FREEPHONE 0900-948-944
Spain-Barcelona Tel: +34-93-496-57-42 Fax: +34-93-496-57-50 FREEPHONE 0900-948-944
Hong Kong Tel: +852-2104-7733 Fax: +852-2104-7633
Beijing Tel: +86-10-5877-1817 Fax: +86-10-5877-1816
Shanghai Tel: +86-21-6288-1473 Fax: +86-21-6288-1751
Singapore Tel: +65-6220-4666 Fax: +65-6220-4333
Japan Tel: +81-3-5575-8411 Fax: +81-3-5575-8420
©2005 Lutron Electronics Co., Inc.
P/N E-367-1101/EA Rev. C 12/05