Ultipor GF-HV filter - Pall Corporation (PLL)

Data Sheet MEGFHVEN
Ultipor ®
GF-HV Filter
Description
The Ultipor GF-HV filter is well suited
for slurry filtration applications having
high viscosities and substantial solid
concentrations. Typical high solid
concentration fluids include ceramic
slurry, metal slurry and conductive
paste. In addition, Ultipor GF-HV filters
are appropriate for very fine, sub-micron
dispersion filtration, such as color resist,
inkjet ink, polishing slurry and similar
applications.
Pall’s Ultipor GF media is a resin-bonded
inorganic microfiber matrix designed for
fine filtration, low pressure loss and long
service life. This resin-bonded structure
resists contaminant unloading or media
migration.
The unique HV version of the Ultipor GF
filter family is specifically constructed
for high viscosity applications where
standard media may not be suitable.
The combination of a rigid support mesh
and a highly porous media structure
provides exceptional flow characteristics,
even at very fine sub-micron removal
ratings and with high viscosity fluids.
Specifications
Materials
• Filter medium: Resin-bonded
inorganic fiber on polyester substrate
• Support/drainage: Polypropylene
• Core/cage/endcaps: Polypropylene
• Gaskets/o-rings: EPDM (other options
available)
• Shell (DFA): Polypropylene
Removal Ratings (Liquid)
• 0.1 µm, 0.45 µm, 1 µm, 2 µm
Operating Conditions
• Maximum operating temperature:
(Liquid service in compatible fluid)
AB/MCY: 80˚C / 176˚F
DFA: 38˚C / 100˚F
• Maximum forward differential pressure:
AB/MCY: 0.55 MPaG @ 20˚C / 80 psig
@ 68˚F, 0.41 MPaG @ 80˚C / 60 psig
@176˚F
• Maximum operating pressure:
DFA: 0.51 MPaG @ 38˚C / 75 psig @
100˚F
Features Advantages Benefits
Unique matrix with resin-coated fibers Robust, fixed pore structure Resists unloading and media migration
Capable of filtration down to 0.1 µm Fine filtration of dispersions Lower cost for filtration versus
membrane filters
Excellent particle removal and retention Consistent and effective filter performance Reproducible filtrate results from
batch-to-batch
Optimized pleat spacing with stronger Resists pleat deformation under conditions Longer service life and excellent filter
pleat support of high viscosity and high flow rate economics
Available lab test filter with small efffective Permits testing and scale-up with identical Facilitates selection of appropriate filter
filter area versions of full-size filters and enables prediction of filter
performance in actual service
Medium utilizes very fine fibers in filter matrix Very high void volume and porosity Excellent flow rates

Pressure Drop vs. Gas Flow Rate 1
AB1 / MCY 1001
DFA4201
Clean pressure drop (kPa)
Liquid flow rate for 10˝ cartridge (gpm)
0
8
2.5 5 7.5 10
7
6
5
4
ZU0045
3
ZU010Z
2
1
ZU2-20Z
0
0 10 20 30 40
Liquid flow rate for 10˝ cartridge (L/min)
1
0.75
0.5
0.25
0
Clean pressure drop (psid)
Clean pressure drop (kPa)
Liquid flow rate (gpm)
0
14
0.25 0.5 0.75 1 1.25 1.5
12
10
ZU0045
8
6
4
ZU010Z
ZU2-20Z
2
0
0 1 2 3 4 5 6
Liquid flow rate (L/min)
2
1.5
1
0.5
0
Clean pressure drop (psid)
1 For liquids with viscosity differing from water, multiply the pressure drop by the viscosity
Configuration and Dimension
245 mm
9.6 in
317 mm
12.5 in
282 mm
11.1 in
71 mm
2.8 in
114 mm
4.5 in
MCY AB Code 7 AB Code 3 DFA

Part Numbers/Ordering Information
Double Open Ended Filter
MCY1001 ■ ▼
Single Open Ended Filter
AB ● ■ ◆ ▲
Capsule Filter
DFA4201 ■
Code
Length
●
1 10 inch
2 20 inch
3 30 inch
Code
Removal Ratings
■
ZU001Z 0.1 µm
ZU0045 0.45 µm
ZU010Z 1 µm
ZU2-20Z 2 µm
Code
O-ring
◆
Specifications
3 AS568A-222
7 AS568A-226
Code
▼
J
Gasket Materials
EPDM (Standard)
Code
▲
O-ring
Materials
H
H4
H13
Fluoroelastomer
Silicon
NBR
Other materials are
available on request
H1
J
FEP Encapsulated
Fluoroelastomer
EPDM (Standard)
Other materials are
available on request
Specifications and availability: The information provided in this literature was reviewed for accuracy at the time of publication.
Product availability may be subject to change without notice.
For current information, consult your local Pall distributor or contact Pall Corporation directly.
Corporate Headquarters
25 Harbor Park Drive
Port Washington, New York 11050
1.516.484.3600 telephone
1.800.360.7255 toll free US
microelectronics@pall.com
Visit us on the Web at www.pall.com/micro
Pall Corporation has offices and plants throughout the world. For Pall representatives in your
area, please go to www.pall.com/contact.asp
Because of technological developments related to the products, systems, and/or services
described herein, the data and procedures are subject to change without notice. Please
consult your Pall representative or visit www.pall.com to verify that this information remains
valid.
© Copyright 2009, Pall Corporation. Pall, , and Ultipor are trademarks of Pall Corporation.
® Indicates a Pall trademark registered in the USA. is a service mark of Pall
Corporation.
MEGFHVEN April 2009