Solar Vision Pages - Visionaire Lighting, LLC

Solar Vision Pole TM
Solar Vision Pole TM
SOLAR VISION POLE TM
Soaks Up the Sun!
WRAP OR RIGID tWO MATERIALS TO CHOOSE FROM:
• Wrap (at left): Durable and flexible photovoltaic solar
wrap (SMR-1) replaces the traditional rigid solar panel and
generates up to 138 watts and operates up to 75 watts of
LED lighting.
• RIGID (at right): For higher wattages, use the larger wattage
rigid solar panels up to 185 watts.
VARIABLE SOLAR CONTROLLER OPTIONS:
• Dusk to dawn controller combined with a photo cell.
• A programmable Solar Controller that is adjustable to turn
lights on at dusk and off to your setting.
Decorative Battery Enclosure:
The decorative battery enclosure is 10” diameter steel with cast
aluminum decorative collars and clam shell for a finished look.
Battery enclosure comes with optional 2 to 8 batteries. The door
is one piece extruded aluminum and lockable to prevent theft.
BATTERIES:
• 8-hour charge provides 40 hours of illumination.
• Each battery: 12 V DC, 30.5 Ah.
• Solar controller protects batteries from over/under charging.
FIXTURES:
Select any Visionaire LED fixture for use with the Solar Vision TM
system. Aria, California Aria, Element, Oden, New Orleans II,
or Pavilion II series of
Luminaires. Available
in Type III or Type V
distribution patterns.
All Visionaire LED
fixtures are rated at a
minimum life (L70) of
60,000 hours. Consult
factory for regional
specifications of
proper sizing and solar
materials.
Aria Element California Aria Oden
New Orleans II
Pavilion II
19645 Rancho Way ▪ Rancho Dominguez, CA ▪ 90220
Tel: (310) 512-6480 ▪ Fax: (310) 512-6486
www.visionairelighting.com
ii 10.29.10

Project Name
Catalog Number
SOLAR WRAP
SMR-1 Features:
• High Temperature and Low
Light Performance
• 20-Year Warranty on Power Output at 80%
• Multi-Contact Connectors
• Bypass Diodes for Shadow Tolerance
• UL Listed to 600 VDC
• Meets IEC 61646 Requirements
Electrical Specifications (68 W):
• Standard Test Conditions (1000 W/m2,
AM 1.5, 25 °C Cell Temperature)
• Maximum Power (Pmax): 68 W
• Voltage at Pmax (Vmp): 16.5 V
• Current at Pmax (lmp): 4.1 A
• Short-circuit Current (Isc): 5.1 A
• Open-circuit Voltage (Voc): 23.1 V
• Maximum Series Fuse Rating: 8 A
Gel Battery specifications
Benefits:
• C ompletely maintenance free.
• Sealed construction eliminates periodic watering,
corrosive acid fumes and spills.
• E lectrolyte will not stratify, no equalization charging
required. Allow faster recharge.
• Increases durability and deep cycle ability for heavy
demand applications.
• Tank formation ensures voltage matching between cells.
Solar Base
Type
Construction
• Decorative battery enclosure is 10” diameter steel.
• Extruded aluminum hinged door, with lock and tamperproof
screws.
• Grounding lug included.
Finish
• All bases and poles are shot-blasted and cleaned to
a near-white finish prior to painting. A Quali-Guard ®
textured thermoset polyester powder coat is then
applied to a minimum of 3 millimeters and oven baked
at a temperature of 400 degrees Fahrenheit to promote
exceptional adherence and finish hardness.
• Pole finish is warranted for a full two (2) years.
Anchorage
• Hot rolled steel bar - minimum yield strength of 50,000
PSI. Bolts have “L” bend on one end and are threaded
rigid solar panel
KD MoDulEs SPECIFICATIONS
Ky
th
an
O
fe
m
wi
Kyocera is leading th
KD215GX-LPU KD210GX-LPU KD205GX-LPU KD185GX-LPU KD135GX-LPU
the development o
and cost effective
Maximum Power 215W 210W 205W 185W 135W •
Our new and impro
•
feature higher outp
Number of Cells 54 54 54 48 36
maintain the three-b
with our d.Blue solar
Tolerance +5Watts/-0Watts +5Watts/-0Watts +5Watts/-0Watts +5%/-5% +5%/-5%
Solar Vision Pole TM
185 Watts 135 Watts
Number of Cells 48 36
Tolerance +5%/-5% +5%/-5%
Maximum System
Voltage
KD MoDulEs SPECIFICATIONS
600v
600v
Maximum Power Voltage 23.6v 17.7v
Maximum Power Current 7.84a 7.63a
Open Circuit Voltage 29.5v 22.1v
Short Circuit Current 8.58a 8.37a
Series Fuse Rating 15a 15a
Length 52.7” 59.1”
Width 39.0” 26.3”
Depth 1.8” 1.8”
Weight 35.3lbs 27.5lbs
Locking Plug-in Locking Plug-in
Termination Method
Connectors
Connectors
Specifications:
• Voltage: 12 DC volts.
• Amps: 36.5 Ah @ 100 hours rate.
• Plate Alloy: Lead calcium.
• Charge voltage @ 68 ºF (20 ºC).
• Cycle 2.30 to 2.35.
• 12VDC 30.5Ah each.
• 8-hour charge powers a night’s use.
• Float 2.25 to 2.30 v.p.c.
• Electrolyte: Sulfuric acid thixotropic gel.
• Vent: Self sealing (2 psi operation).
• Operating temperature: -76 ºF (-60 ºC) to 140 ºF (60 ºC).
on the other end. Bolts are galvanized and are furnished with
double nuts and washers. All Anchor Bolts are in accordance
with ASTM A-153.
• 1” x 36” bolts provided
Solar Controller I (SC1)
• Charging indicator light.
• Lightning protection.
• Temperature compensation.
• Battery protection from over/under charging.
Solar Controller II (SC2)
• Ten field adjustable lighting control options with rotary digital
switch.
• Manual test capability with LED indicator.
• Charging indicator light.
• Temperature compensation.
• Battery protection from over/under charging.
5½ ft.
Maximum system
KD215GX-LPU 600V 600V 600V 600V 600V
Voltage
KD210GX-LPU KD205GX-LPU KD185GX-LPU KD135GX-LPU
Maximum Power
Maximum Power 215W 26.6V 210W 26.6V 205W 26.6V 185W 23.6V 135W • locking 17.7V connector
Voltage
• utilizes a larger, mo O
Solar Vision Pole TM
Number of Cells Maximum 54 Power
8.09A 54 7.90A 54 7.71A 48 7.84A 36
solar 7.63A cell (156mm)
Current
po
Select a Solar
Assembly
SMR-1
Flexible Solar Wrap
*50 watt max
SMR-2
Rigid Solar Panel
*100 watt max
Height
16’
24’
18’
20’
22’
24’
26’
Gauge/
Shaft
Size
5”
(5R)
# Fixture
LEDs
24 (24L)
48 (48L)
72 (72L)
96 (96L)
*See fixture for available
number of LEDs
# of
Batteries
2 (25 W)
4 (50 W)
6 (75 W)
8 (100 W)
PV*
Wattage Mounting Finish
68 W
138 W
135 W
185 W
*Photovoltaic
Single (S1)
D180 (D2)
Post Top
(PT)
Black (BK)
Bronze (BZ)
White (WH)
Green (GN)
Grey (GY)
Silver Metallic (SL)
Custom Color (CC)
Solar
Controller
SC1 (SC2)
SC2 (SC2)
SOLAR VISION POLE TM BASE PLATE
1.00” THK. H.R.S.
2.75 (4x)
Ø10.20 OPENING
1.25 (4x)
Ø15.00
Ø19.00
10.29.10
19645 Rancho Way ▪ Rancho Dominguez, CA ▪ 90220
Tel: (310) 512-6480 ▪ Fax: (310) 512-6486
www.visionairelighting.com
iii