Spec Sheet - KPI-JCI

Model ProSizer 4200
Mobile Screening Plant
Model 4200 Spec Sheet
Operational Mode
815 3/4 [67'-11 3/4"]
164 1/8 [13'-8 1/8"]
200 3/16 [16'-8 3/16"]
488 5/8 [40'-8 5/8"]
556 1/8 [46'-4 1/8"]
613 5/8 [51'-1 5/8"]
750 1/2 [62'-6 1/2"]
Transportation Mode
794 3/4 [66'-2 3/4"]
1 1/2
33 [2'-9"]
613 5/8 [51'-1 5/8"]
49 [4'-1"]
49 [4'-1"]
760 1/4 [63'-4 1/4"]
CRUSHER TO SCREEN DELIVERY CONVEYOR
One (1) 48” conveyor with hydraulic reversible drive
Vulcanized
Belting is 1-440 PIW
SIDE PRODUCT CONVEYOR
One (1) 16’ x 24” conveyor
Reversible hydraulic variable speed (0-350 FPM)
5’ receiving hopper at loading point
220 PIW, 1/8 x 1/16 cover, vulcanized
CRUSHER RETURN CONVEYOR
One (1) 24’ x 24” conveyor with hydraulic drive
(350 FPM)
self-cleaning wing pulley
Belting is 330 PIW, 3/16 x 1/16 cover – 5/8” cleat,
vulcanized
CROSS CONVEYOR
One (1) 7’ x 18” flat conveyor with hydraulic drive
(350 FPM)
Belting is 330 PIW, 3/16” x 1/16” cover, vulcanized
VIBRATING FEEDER
50" x 18' horizontal type
Hydraulic variable speed drive
5' replaceable tine deck with two sections
By-pass chute under grizzly with AR liner (3/16")
NOTE: Specifications are subject to change without notice.

MAIN TRUCK
Semi-trailer with rear triple axel
Hydraulic run on jacks
Twelve (12) 11 R22.5 tires and mud flaps
Air bag suspension and fifth wheel pin, air brakes, rear
tail lights
DIESEL POWER AND HYDRAULICS
John Deere 6135, 550 HP, Tier III with batteries,
cables, and fuel tank
100KW generator, starter panel for independent
stackers
200 gal. hydraulic tank
Pressure and return filters
VIBRATING SCREEN
One (1) 2516 double deck conventional incline screen
5' x 16' top and bottom deck
Top and bottom deck are driven 900 RPM vibrating
mechanism
Fines collecting hopper; tube type support stand
Top and bottom discharge chutes
Aggregate spreader, step type walkway with wrap
around catwalk
HOPPER
14 cubic yard heaped capacity
8' x 20' top opening
PLANT CAPACITY
300 TPH (tonnages will vary with conditions)
PAINT
One primer coat, finish coat of beige
IMPACTOR
4250 Horizontal shaft with heavy duty rotor assembly
Three (3) reversible and replaceable blow bars
primary apron, secondary apron, manual adjustment of
hydraulic actuated access door; variable speed
hydraulic drive
OPTIONS
Magnet and Support
Add-on single tag axle
Screenbox catwalks (one per side with ladder)
Dust suppression system with manifold for customer
water source
Cross conveyor under grizzly bypass with fold for
transport (16' x 24')
Standard Steel Screen Cloth for 2516
2516A Multi-Frequency Screen in lieu of standard
screen
CONSULT FACTORY FOR ADDITIONAL OPTIONS
PHYSICAL OPERATION CHARACTERISTICS
Overall Length............................................68'/20.73m
Travel Length..............................................66'3"/20.21m
Operating Height..........................................18'3"/5.58m
Travel Height................................................14'/4.27m
Operating Width..........................................23'2"/7.07m
Travel Width.................................................11'9"/3.63m
Unit Weight...................................105,700lbs/47,945 kg
2704 West LeFevre Road
Sterling, IL 61081
Phone: (815) 626-6374
FAX: (815) 626-6430
mail@kpijci.com
www.kpijci.com
NOTE: Specifications are subject to change without notice.
Because Astec Mobile Screens may use in its catalog & literature, field photographs of its products which may have been modified by the owners, products furnished by Astec Mobile Screens may not
necessarily be as illustrated therein. Also continuous design progress makes it necessary that specifications be subject to change without notice. All sales of the products of Astec Mobile Screens are subject to
the provisions of its standard warranty. Astec Mobile Screens does not warrant or represent that its product meet and federal, state, or local statures, codes, ordinances, rules, standards or other regulations,
including OSHA and MSHA, covering safety, pollution, electrical wiring, etc. Compliance with these statutes and regulations is the responsibility of the user and will be dependent upon the areas and the use to
which the product is put by the user. In some photographs, guards may have been removed for illustrative purposes only. This equipment should not be operated without all guards attached in their normal
position. Placement of guards and other safety equipment is often dependent upon the area and the use to which the product is put. A safety study should be made by the user of the application, and, if
required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products.
Mdl ProSizer 4200 Printed in USA; 5/02/2013