IMPORTANT NOTICE Early in the AE design ... - Peerless Pump

Peerless Pump Company
Indianapolis, IN 46206-7026
HORIZONTAL FIRE PUMPS
Electric Motor or Diesel Engine Driven
Fire Fitting Outline Drawing
High Pressure
SECTION 1530
Page 7
March 13, 1998
Notes:
1. Only Items marked will be furnished.
2. All dimensions are In Inches.
3. Pump flanges must not be used to support weight of fittings.
4A
4. All fitting flanges will conform to ANSI Standard B16.1 and will be:
a.} 250 Lb. on relief valve Inlet and relief valve elbow.
b.} 300 Lb. on OCV and Cla-Val Valve inlet and outlet.
c.} 250 or 300 Lb. on tee.
d.} 125 or 150 Lb. cone Inlet and outlet.
5. All gaskets and bolting are to be supplied by others.
6. All direct acting and pilot operated valves are suitable for a back pressure up to 100 psi.
Item Description
4 Discharge Tee
Relief Valve Elbow
5 Direct Acting Relief Valve
6 Pilot Operated Relief Valve
7 Overflow Cone
Manufacturer Model Listing /Approval Pressure Range Psi
3 In 4 In 6 In 8 In
Kunkle 218CS164 UL/FM UL/FM UL/FM Not Available 70 to 200
Watts 1116FM UL UL/FM UL/FM Not Listed or
Approved
100 to 300
OCV OCV 108FCA UL UL UL Not UL Listed 100 to 300
OCV OCV 108FCA FM FM FM FM 60 to 180
Cla-Val 50BK4KG1 UL UL UL Not UL Listed 100 to 300
Cla-Val 50BK4KG1 FM FM FM FM 20 to 200
Rev 3-98
Page 1 of 2
Subject to change without notice
DT4852881 & DT4852882