Owner's Manual Saildrive 330 - CLOUDS.NL

Declaration of Conformity for Recreational Craft Propulsion Engines
With the requirements of Directive 94/25/EC, as amended by Directive 2003/44/EC
To be completed by manufacturer of outboard engines/inboard engines or stern drives with integral exhaust
Name of manufacturer: Nyköpings Marinkonvertering AB
Adress: Bagaregatan 37
Town: Nyköping Post Code: S-611 30 Country: Sweden
Name of Notified body for exhaust emission assessment (Parsun): VCA Headquarters, 1 Eastgate Office Center, Eastgate Road,
Bristol, BS5 6XX United Kingdom
Module used for exhaust emission assessment: Annex 1, Module B
Description of Engine and essential requirements
●Inboard engine ●Unleaded petrol ●4-stroke
Identification of engine covered by this Declaration of Conformity:
Engine model: Saildrive 330 (Outboard Parsun 15FW converted to inboard engine Saildrive 330) and
CE-label on engine control panel.
Engine identification no. is engraved on the engine crankcase, starboard side.
Engine family: Base engine Parsun 15FW, 11,0 kW
Product no. 323G- Serial no.0100001-
Standard used:
EN ISO 8178
Noise Emissions: See vessel manufacturer ”Declaration of Conformity”
We declare on behalf of the engine manufacturer that the engine will meet the exhaust emission requirements of Directive 94/25/EC as
amended by Directive 2003/44/EC when installed in a recreational craft, in accordance with the engine manufacturer`s supplied
installation instructions and manual and that this engine must be put into service until the recreational craft into which it is to be
installed has been declared in conformity with the relevant provisions of the above mentioned Directive.
Per Hagström Stefan Kindeborg Christer Sandström
CEO Engineer Logistics
Nyköpings Marinkonvertering AB
2008-12-04
Engine No. 323_______________________
To be filled in by the engine installer!