Competitor Cross Reference - White Drive Products, Inc.

SALES
GUIDE

OVERVIEW
The WS product family features flow rates up to
76 LPM [20 GPM], torque up to 824 Nm [7,295
lb-in], and pressures up to 207 bar [3,000 PSI] at
continuous ratings. It is a competitive replacement
for the Eaton 2000 and Danfoss OMS series,
targeting agricultural equipment, skid steer attachments,
and other applications that require greater
torque under demanding conditions.
A distinguishing feature of the WS in relation to
competitive products is its heavy duty drive link
with a larger pitch diameter. This enables the WS
to better withstand pressure and torque spikes
and is reflected in its intermittent and peak performance
ratings. Additional product features include
a three zone commutator valve, standard case
drain, and heavy-duty tapered roller bearings.
This series offers nine (9) displacements from
100cc [6.1in³] through 496cc [30.3in³]. Nine (9)
shaft and seven (7) mounting options are available
to meet the most common SAE and European
requirements.
MOTOR SIZING
On the following pages the displacement size does
not always match the competitor models. The
cross-reference charts show the closest equivalent
WS motor to the competitor model. Larger
displacement sizes increase output torque with a
corresponding speed reduction. Smaller displacement
sizes increase speed with a corresponding
torque reduction. In cases where there is a choice
between selecting a larger or smaller displacement,
the effects on speed and torque should be
considered.
SIDE LOAD
The effects of shock loads and shaft deflection
need to be fully considered. Side loads with high
shock or varying loads should be reviewed and
qualified through testing to verify the motor can
meet the application requirements. Consult published
side load charts or contact your White Drive
Products representative for more information.

FEATURES & BENEFITS
1
2
3
4
5
6
1. Nine shaft and seven mounting options
to meet the most common SAE and European
requirements.
2. Heavy- duty tapered roller bearings for
extra side load capacity.
3. Heavy-duty drive link with larger pitch
diameter than competitors for greater
resistance to pressure and torque spikes.
4. Three seal design provides greater
protection against potential leaks.
5. Three zone commutator valve for high
flow capacity.
6. Standard case drain for extended shaft
seal life.

SPECIFICATIONS
CODE Displacement
cc [in 3 /rev]
Max. Speed Max. Flow Max. Torque Max. Pressure
rpm lpm [gpm] Nm [lb-in] bar [psi]
cont. inter. cont. inter. cont. inter. cont. inter. peak
100 100 [6.10] 745 880 76 [20] 95 [25] 280 [2475] 416 [3680] 207 [3000] 310 [4500] 310 [4500]
110 112 [6.85] 675 840 76 [20] 95 [25] 307 [2715] 468 [4145] 207 [3000] 310 [4500] 310 [4500]
130 129 [7.86] 580 730 76 [20] 95 [25] 370 [3275] 550 [4865] 207 [3000] 310 [4500] 310 [4500]
160 162 [9.90] 465 700 76 [20] 114 [30] 462 [4090] 618 [5465] 207 [3000] 276 [4000] 310 [4500]
200 202 [12.31] 375 560 76 [20] 114 [30] 576 [5100] 768 [6795] 207 [3000] 276 [4000] 310 [4500]
230 228 [13.92] 325 490 76 [20] 114 [30] 642 [5685] 806 [7135] 207 [3000] 276 [4000] 310 [4500]
320 325 [19.81] 235 350 76 [20] 114 [30] 789 [6980] 1029 [9105] 190 [2750] 224 [3250] 259 [3750]
400 399 [24.36] 190 280 76 [20] 114 [30] 816 [7225] 1034 [9150] 155 [2250] 190 [2750] 224 [3250]
500 496 [30.29] 155 230 76 [20] 114 [30] 824 [7295] 1041 [9210] 121 [1750] 155 [2250] 172 [2500]

2-Hole SAE A Mount with 7/8” O-Ring Ports
1” Keyed Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM
104-1671-006 151F-2301
N/A
104-3457-006 151F-2302
104-3393-006 151F-2303
104-3155-006 151F-2304
104-1998-006 151F-2305
104-3379-006 151F-2306
104-1143-006
N/A
151F-2307
104-3622-006 151F-2345
WS Series
355100A7110AAAAA
355110A7110AAAAA
355130A7110AAAAA
355160A7110AAAAA
355200A7110AAAAA
355230A7110AAAAA
355320A7110AAAAA
355400A7110AAAAA
355500A7110AAAAA
6B Spline Shaft
100 [6.2]
N/A
130 [8.0]
160 [9.6]
100 [6.1]
N/A
126 [7.7]
160 [9.8]
100 [6.1]
112 [6.9]
129 [7.9]
162 [9.9]
104-3500-006
N/A
104-1575-006
104-1018-006
195 [11.9] 200 [12.2] 202 [12.3] 104-1992-006
245 [14.9] 250 [15.3] 228 [13.9] 104-1020-006
305 [18.7] 315 [19.2] 325 [19.8] 104-3280-006
395 [24.0] 393 [24.0] 399 [24.4] 104-3638-006
490 [29.8] 488 [29.8] 496 [30.3] 104-1432-006
151F-2309
N/A
151F-2310
151F-2311
151F-2312
151F-2313
151F-2314
151F-2315
151F-2346
355100A7102AAAAA
355110A7102AAAAA
355130A7102AAAAA
355160A7102AAAAA
355200A7102AAAAA
355230A7102AAAAA
355320A7102AAAAA
355400A7102AAAAA
355500A7102AAAAA
1-1/4” Keyed Shaft
100 [6.2]
N/A
130 [8.0]
160 [9.6]
100 [6.1]
N/A
126 [7.7]
160 [9.8]
100 [6.1]
112 [6.9]
129 [7.9]
162 [9.9]
104-1904-006
N/A
104-3241-006
104-1789-006
195 [11.9] 200 [12.2] 202 [12.3] 104-1999-006
245 [14.9] 250 [15.3] 228 [13.9] 104-3167-006
305 [18.7] 315 [19.2] 325 [19.8] 104-1632-006
395 [24.0] 393 [24.0] 399 [24.4] 104-3168-006
490 [29.8] 488 [29.8] 496 [30.3] 104-3458-006
151F-2317
N/A
151F-2318
151F-2319
151F-2320
151F-2321
151F-2322
151F-2323
151F-2347
355100A7120AAAAA
355110A7120AAAAA
355130A7120AAAAA
355160A7120AAAAA
355200A7120AAAAA
355230A7120AAAAA
355320A7120AAAAA
355400A7120AAAAA
355500A7120AAAAA
1-1/4” 14 Tooth Shaft
100 [6.2]
N/A
130 [8.0]
160 [9.6]
100 [6.1]
N/A
126 [7.7]
160 [9.8]
100 [6.1]
112 [6.9]
129 [7.9]
162 [9.9]
104-1030-006
N/A
104-3361-006
104-3281-006
195 [11.9] 200 [12.2] 202 [12.3] 104-1033-006
245 [14.9] 250 [15.3] 228 [13.9] 104-3154-006
305 [18.7] 315 [19.2] 325 [19.8] 104-3279-006
395 [24.0] 393 [24.0] 399 [24.4] 104-3358-006
490 [29.8] 488 [29.8] 496 [30.3] 104-1422-006
151F-2325
N/A
151F-2326
151F-2327
151F-2328
151F-2329
151F-2330
151F-2331
151F-2348
355100A7123AAAAA
355110A7123AAAAA
355130A7123AAAAA
355160A7123AAAAA
355200A7123AAAAA
355230A7123AAAAA
355320A7123AAAAA
355400A7123AAAAA
355500A7123AAAAA
2-HOLE A MOUNT
7/8” O-RING WITH 7/16” DRAIN
Motor Mount View
Side View With Port Location

2-Hole SAE A Mount with 1-1/16” O-Ring Ports
1” Keyed Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM
104-1038-006
N/A
104-1039-006
104-1040-006
104-1041-006
104-1042-006
104-1043-006
104-1044-006
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
WS Series
355100A7610AAAAA
355110A7610AAAAA
355130A7610AAAAA
355160A7610AAAAA
355200A7610AAAAA
355230A7610AAAAA
355320A7610AAAAA
355400A7610AAAAA
355500A7610AAAAA
6B Spline Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-1054-006
N/A
355100A7602AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A7602AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
104-1055-006
N/A
355130A7602AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
104-1056-006
N/A
355160A7602AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-1057-006
N/A
355200A7602AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
104-1058-006
N/A
355230A7602AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
104-1059-006
N/A
355320A7602AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
104-1060-006
N/A
355400A7602AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
N/A
N/A
355500A7602AAAAA
1-1/4” Keyed Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-1062-006
N/A
355100A7620AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A7620AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
104-1063-006
N/A
355130A7620AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
104-1064-006
N/A
355160A7620AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-1065-006
N/A
355200A7620AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
104-1066-006
N/A
355230A7620AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
104-1067-006
N/A
355320A7620AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
104-1068-006
N/A
355400A7620AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
104-1421-006
N/A
355500A7620AAAAA
1-1/4” 14 Tooth Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-1088-00
N/A
355100A7623AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A7623AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
104-1089-006
N/A
355130A7623AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
104-1090-006
N/A
355160A7623AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-1091-006
N/A
355200A7623AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
104-1092-006
N/A
355230A7623AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
104-1093-006
N/A
355320A7623AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
104-1094-006
N/A
355400A7623AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
104-1423-006
N/A
355500A7623AAAAA
2-HOLE A MOUNT
1-1/16” O-RING WITH 7/16” DRAIN
Motor Mount View
Rear View With Port Location

Magneto Mount with 7/8” O-Ring Ports
1” Keyed Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM
104-3620-006 151F-2378
N/A
104-3369-006 151F-2379
N/A
104-1562-006 151F-2381
N/A
104-3381-006
N/A
151F-2380
151F-2382
151F2383
104-1891-006 151F-2384
104-1566-006 151F-2385
WS Series
355100A8110AAAAA
355110A8110AAAAA
355130A8110AAAAA
355160A8110AAAAA
355200A8110AAAAA
355230A8110AAAAA
355320A8110AAAAA
355400A8110AAAAA
355500A8110AAAAA
6B Spline Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-1791-006
151F-2360
355100A8102AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A8102AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
104-3272-006
151F-2361
355130A8102AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
N/A
151F-2362
355160A8102AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-3059-006
151F-2363
355200A8102AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
104-1451-006
151F-2364
355230A8102AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
104-1982-006
151F-2365
355320A8102AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
N/A
151F-2366
355400A8102AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
104-1442-006
151F-2367
355500A8102AAAAA
1-1/4” Keyed Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-1343-006
151F-2369
355100A8120AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A8120AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
104-3453-006
151F-2370
355130A8120AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
104-3636-006
151F-2371
355160A8120AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-1346-006
151F-2372
355200A8120AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
104-1627-006
151F-2373
355230A8120AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
104-3289-006
151F-2374
355320A8120AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
104-3285-006
151F-2375
355400A8120AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
104-3382-006
151F-2376
355500A8120AAAAA
1-1/4” 14 Tooth Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-3371-006
151F-2351
355100A8123AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A8123AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
104-3136-006
151F-2352
355130A8123AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
104-1701-006
151F-2353
355160A8123AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-3293-006
151F-2354
355200A8123AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
104-3149-006
151F-2355
355230A8123AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
104-3150-006
151F-2356
355320A8123AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
104-3385-006
151F-2357
355400A8123AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
104-1591-006
151F-2358
355500A8123AAAAA
MAGNETO MOUNT
7/8” O-RING WITH 7/16” DRAIN
Motor Mount View
Side View With Port Location

Magneto Mount with 1-1/16” O-Ring Ports
1” Keyed Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
WS Series
355100A8610AAAAA
355110A8610AAAAA
355130A8610AAAAA
355160A8610AAAAA
355200A8610AAAAA
355230A8610AAAAA
355320A8610AAAAA
355400A8610AAAAA
355500A8610AAAAA
6B Spline Shaft
100 [6.2] 100 [6.1] 100 [6.1]
N/A
N/A
355100A8602AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A8602AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
N/A
N/A
355130A8602AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
N/A
N/A
355160A8602AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
N/A
N/A
355200A8602AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
N/A
N/A
355230A8602AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
N/A
N/A
355320A8602AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
N/A
N/A
355400A8602AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
N/A
N/A
355500A8602AAAAA
1-1/4” Keyed Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-3737-006
N/A
355100A8620AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A8620AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
N/A
N/A
355130A8620AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
N/A
N/A
355160A8620AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-3629-006
N/A
355200A8620AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
N/A
N/A
355230A8620AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
N/A
N/A
355320A8620AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
N/A
N/A
355400A8620AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
N/A
N/A
355500A8620AAAAA
1-1/4” 14 Tooth Shaft
100 [6.2] 100 [6.1] 100 [6.1]
N/A
N/A
355100A8623AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A8623AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
N/A
N/A
355130A8623AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
104-1563-006
N/A
355160A8623AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
N/A
N/A
355200A8623AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
N/A
N/A
355230A8623AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
N/A
N/A
355320A8623AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
N/A
N/A
355400A8623AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
104-1599-006
N/A
355500A8623AAAAA
MAGNETO MOUNT
1-1/16” O-RING WITH 7/16” DRAIN
Motor Mount View
Rear View With Port Location

Square A Mount with 1/2” BSP.F Offset Manifold Ports
25mm Keyed Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM
N/A
N/A
104-3146-006
104-3061-006
104-3571-006
N/A
104-3394-006
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
WS Series
355100AH312AAAAA
355110AH312AAAAA
355130AH312AAAAA
355160AH312AAAAA
355200AH312AAAAA
355230AH312AAAAA
355320AH312AAAAA
355400AH312AAAAA
355500AH312AAAAA
32mm Keyed Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-3040-006
151F-0501
355100AH321AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110AH321AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
104-3041-006
151F-0502
355130AH321AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
104-3042-006
151F-0503
355160AH321AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-3043-006
151F-0504
355200AH321AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
104-3044-006
151F-0505
355230AH321AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
104-3045-006
151F-0506
355320AH321AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
104-3046-006
151F-0505
355400AH321AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
104-3047-006
151F-0605
355500AH321AAAAA
SQUARE A MOUNT
1/2” BSP.F OFFSET MANIFOLD
WITH 1/4” DRAIN
Motor Mount View
Side View With Port Location
Note: While the Eaton 2000 does have the 1/2” BSP.F offset porting, the surface is not a
manifold surface.
ADDITIONAL OPTIONS
In addition to all the mounting, porting, and shaft
options referenced in this selling guide, White
Drive Products also offers the following:
Mounting:
Shafts:
Side Porting:
End Porting:
3.25” Pilot Wheel Mount
1-1/2” Tapered
9/16” O-Ring and 3/8” BSP.F
7/8” O-Ring and 1/2” BSP.F

2-Hole A Mount with 1/2” BSP.F Offset Manifold Ports
25mm Keyed Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM
104-3005-006
N/A
104-3265-006
104-3639-006
104-3431-006
N/A
104-3642-006
104-1655-006
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
WS Series
355100A7312AAAAA
355110A7312AAAAA
355130A7312AAAAA
355160A7312AAAAA
355200A7312AAAAA
355230A7312AAAAA
355320A7312AAAAA
355400A7312AAAAA
355500A7312AAAAA
32mm Keyed Shaft
100 [6.2] 100 [6.1] 100 [6.1]
104-3062-006
N/A
355100A7321AAAAA
N/A N/A 112 [6.9]
N/A
N/A
355110A7321AAAAA
130 [8.0] 126 [7.7] 129 [7.9]
104-3063-006
N/A
355130A7321AAAAA
160 [9.6] 160 [9.8] 162 [9.9]
104-1799-006
N/A
355160A7321AAAAA
195 [11.9] 200 [12.2] 202 [12.3]
104-3065-006
N/A
355200A7321AAAAA
245 [14.9] 250 [15.3] 228 [13.9]
104-3066-006
N/A
355230A7321AAAAA
305 [18.7] 315 [19.2] 325 [19.8]
104-3067-006
N/A
355320A7321AAAAA
395 [24.0] 393 [24.0] 399 [24.4]
104-1760-006
N/A
355400A7321AAAAA
490 [29.8] 488 [29.8] 496 [30.3]
104-3068-006
N/A
355500A7321AAAAA
2-HOLE A MOUNT
1/2” BSP.F OFFSET MANIFOLD
WITH 1/4” DRAIN
Motor Mount View
Side View With Port Location
Note: While the Eaton 2000 does have the 1/2” BSP.F offset porting, the surface is not a
manifold surface.
NOTE:
All the White Drive Products WS Series motors
mentioned in this selling guide come standard with
the black paint option. All the Danfoss products
that were crossed over in this guide were unpainted.
The Eaton Series motors that were crossed
over in this guide were crossed over with the black
to black paint option where applicable. Some of
the Eaton products were unpainted. Make sure
that when crossing over all models that the correct
paint code is referenced.
Example: 355230A2110AAAAA
A = Black Paint
B = Black (unpainted flange face)
Z = No Paint

4.25” Pilot Wheel Mount with 7/8” O-Ring Ports
1-1/4” Tapered Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM
105-1375-006
N/A
105-1374-006
105-1488-006
105-1236-006
105-1251-006
105-1151-006
105-1351-006
105-1152-006
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
WS Series
355100Y8122AAAAA
355110Y8122AAAAA
355130Y8122AAAAA
355160Y8122AAAAA
355200Y8122AAAAA
355230Y8122AAAAA
355320Y8122AAAAA
355400Y8122AAAAA
355500Y8122AAAAA
4.25” WHEEL MOUNT 7/8” O-RING WITH 7/16” DRAIN
Motor Mount View
Side View With Port Location
4.25” Pilot Wheel Mount with 1-1/16” O-Ring Ports
1-1/4” Tapered Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM
105-1375-006
N/A
105-1374-006
105-1488-006
105-1236-006
105-1251-006
105-1151-006
105-1351-006
105-1152-006
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
WS Series
355100Y8622AAAAA
355110Y8622AAAAA
355130Y8622AAAAA
355160Y8622AAAAA
355200Y8622AAAAA
355230Y8622AAAAA
355320Y8622AAAAA
355400Y8622AAAAA
355500Y8622AAAAA
4.25” WHEEL MOUNT 7/8” O-RING WITH 7/16” DRAIN
Motor Mount View
Side View With Port Location

EURO Wheel Mount with 1/2” BSP.F Offset Manifold Ports
35mm Tapered Shaft
Displacements - cc [in 3 ]
2000 OMS WS
100 [6.2] 100 [6.1] 100 [6.1]
N/A N/A 112 [6.9]
130 [8.0] 126 [7.7] 129 [7.9]
160 [9.6] 160 [9.8] 162 [9.9]
195 [11.9] 200 [12.2] 202 [12.3]
245 [14.9] 250 [15.3] 228 [13.9]
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
Eaton Danfoss
2000 TM OMS TM WS Series
N/A 151F-0529 355100Z8328AAAAA
N/A N/A 355110Z8328AAAAA
N/A 151F-0530 355130Z8328AAAAA
N/A 151F-0531 355160Z8328AAAAA
N/A 151F-0532 355200Z8328AAAAA
N/A 151F-0533 355230Z8328AAAAA
N/A 151F-0534 355320Z8328AAAAA
N/A 151F-0609 355400Z8328AAAAA
N/A N/A 355500Z8328AAAAA
32mm Keyed Shaft
100 [6.2] 100 [6.1] 100 [6.1] N/A 151F-0521
N/A N/A 112 [6.9] N/A N/A
130 [8.0] 126 [7.7] 129 [7.9] N/A 151F-0523
160 [9.6] 160 [9.8] 162 [9.9] 105-1448-0006 151F-0524
195 [11.9] 200 [12.2] 202 [12.3] 105-1449-0006 151F-0525
245 [14.9] 250 [15.3] 228 [13.9] 105-1337-0006 151F-0526
305 [18.7] 315 [19.2] 325 [19.8]
395 [24.0] 393 [24.0] 399 [24.4]
490 [29.8] 488 [29.8] 496 [30.3]
N/A
N/A
N/A
151F-0527
151F-0610
N/A
355100Z8321AAAAA
355110Z8321AAAAA
355130Z8321AAAAA
355160Z8321AAAAA
355200Z8321AAAAA
355230Z8321AAAAA
355320Z8321AAAAA
355400Z8321AAAAA
355500Z8321AAAAA
EURO WHEEL MOUNT
1/2” BSP.F OFFSET MANIFOLD
WITH 1/4” DRAIN
Motor Mount View
Side View With Port Location
Note: While the Eaton 2000 does have the 1/2” BSP.F offset porting, the surface is not a
manifold surface.
White Drive Products, Inc.
P.O. Box 1127
Hopkinsville, KY. USA 42241
Phone: +1.270.885.1110
Fax: +1.270.886.8462
infousa@whitedriveproducts.com
White Drive Products GmbH
Halskestrasse 15
D-40880 Ratingen, Germany
Phone: +49 2102-1237770
Fax: +49 2102-1237779
infoeu@whitedriveproducts.com
White (China) Drive Products Co., Ltd.
1-8 Ning Zhen Gong Lu
Zhenjiang, 212021, Jiangsu, China
Phone: +86 511 5729988
Fax: +86 511 5728921
infochina@whitedriveproducts.com
White Drive Products, Inc.
Asian Distribution Center
Unit 18, 9/F.,Corporation Park
11 on Lai Street, Siu Lek Yuen
Shatin, N.T. Hong Kong
Phone: +852 2637 6682
Fax: +852 2637 6978
infohk@whitedriveproducts.com
www.whitedriveproducts.com
SG-355 7.07