TW-Mill - Technowood
TW-Mill - Technowood
TW-Mill - Technowood
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
modularity-driven flexibility<br />
<strong>TW</strong>-<strong>Mill</strong> - The joinery machine<br />
System advantages<br />
• very robust design<br />
• vast diversity of variants<br />
• in mobile or fixed version<br />
• individual number and positions<br />
of units<br />
• individual quantity of tool sites<br />
• individual rail lengths<br />
• individual passaging width<br />
The option for individual features leaves nothing to be desired.<br />
The dimensions of the plant can be specified at the coustomer`s need - depending<br />
on the situation in the factory and on the planned product-range.<br />
The basic version of the <strong>TW</strong>-<strong>Mill</strong> can be delivered in its mobile variant - the portal<br />
then moves on rails over the workpiece. For the fixed <strong>TW</strong>-<strong>Mill</strong>, the workpiece is<br />
automatically infed on portal trolleys, moved through below the portal and<br />
discharged following processing.<br />
The quantity of units as well as the tool sites is freely eligible.<br />
The high-performance spindle, tool changer and further components were<br />
composed to an optimal costom-made solution.<br />
vielfältig einsetzbar<br />
In the <strong>Technowood</strong> <strong>TW</strong>-<strong>Mill</strong> operating<br />
centre, any items like hard wood<br />
plates, solid wood plates, laminated<br />
timber, board stacks, sandwich plates<br />
and other panels can be processed rationally<br />
and accurately to the millimetre.<br />
Furthermore, the plant is designed for<br />
cutting off one or several single rods.<br />
Large elements like box beam, roof,<br />
ceiling and wall elements can be completely<br />
handled.<br />
modular erstellbar<br />
The <strong>TW</strong>-<strong>Mill</strong> impresses by its modular<br />
and high-quality design. It is possible<br />
to freely determine the length of<br />
the facility, the passaging width, the<br />
opening height, the configuration and<br />
the number of units as well as many<br />
features more.<br />
Depending on the customer‘s wish, the<br />
cut-off portal <strong>TW</strong>-<strong>Mill</strong> can be put on<br />
rails as mobile version. Then, the portal<br />
moves above the workpiece during<br />
processing, while the workpiece is positioned<br />
on the processing table.<br />
For the stationary version of <strong>TW</strong>-<strong>Mill</strong>,<br />
the portal remains fixed, the portal trolley<br />
executing the axle movement in X<br />
direction. These so called „<strong>TW</strong>-Carriers“<br />
lead the workpieces through under the<br />
portal with its milling and spindle units.<br />
Of particular interest is the option for<br />
automatic infeed and discharge.<br />
qualitativ hochwertig<br />
Due to its stable, closed construction<br />
the <strong>TW</strong>-<strong>Mill</strong> is very precise in processing<br />
and achieves high natural resonant<br />
frequencies. The units can be moved<br />
away from the table area in their y<br />
axle. This enables comprehensive<br />
processing inclusive deep horizontal<br />
borings. The basic design of the portal<br />
holds a complete 5-axles unit. This<br />
24kW, water-cooled high-performance<br />
spindle automatically obtains the<br />
required tools from the tool changer.<br />
Tool speeds of max. 16000 rpm can be<br />
freely programmed for every tool.<br />
leistungsstark ausgelegt<br />
Optionally, a high-torque, 5-axles saw<br />
unit can be used, for example. This<br />
unit can host a saw blade with a maximum<br />
diameter of 1000 mm. It is able<br />
to tilt it to the horizontal. In addition to<br />
all conceivable cuts, this saw is capable<br />
of cutting jags, skew notches, grooves,<br />
slots, etc. The design spindle and saw<br />
mounting is low-collision - both units<br />
are positioned below the Z-arm.<br />
effizient arbeitend<br />
Tool changeover times are very short,<br />
as the spindle is able to get a new tool<br />
from the stack while the saw is still<br />
working. All axles are equipped with<br />
positive measuring systems, reference<br />
runs thus becoming unnecessary.<br />
Individual positioning, number and design of<br />
the spindles<br />
Dimension of the equipment according to<br />
the customer`s desire<br />
Basic versions are mobile or stationary<br />
portals