conductivity - MEYER Industrie-Electronic GmbH

More documents

Recommendations

Info

DIGITAL FLOW TRANSMITTER MyProc MFT 0247 Remote transmitter: Each transmitter is available in either: – MFT 0247 Universal transmitter for connection to MEYLE sensor or other sensor types – This flow transmitter can be associated with MEYLE flow sensor MFS 0242, MFS 0252 or another flow sensor, with pulse output signal. – MFT 0247 transmitter for connection to compact MEYLE sensors. – This flow transmitter can only be associated with MEYLE flow sensor MFS 0242, MFS 0252 with “Low Power“ pulse output signal. Wall-mounted Panel-mounted Dimensions: Panel-mounted version 88 38 76 25 88 Wall-mounted version 126 31.50 143 90 120 23 23 16 Meyer Industrie-Electronic GmbH – MEYLE Carl-Bosch-Straße 8 49525 Lengerich/Germany Tel.: +49 54 81-93 85-0 Fax: +49 54 81-93 85-12 Internet: www.meyle.de E-Mail: sales@meyle.de
DIGITAL FLOW TRANSMITTER MyProc MFT 0247 Technical data (remote version): MFT 0247 Universal transmitter MFT 0247 transmitter General data Compatibility MEYLE flow sensor with frequency output MEYLE flow sensor with frequency output MFS 0242, MFS 0252 and other sensors with MFS 0242, MFS 0252 (pulse “Low Power” . compatible electrical data. version). Materials Housing, cover PC (panel-mounted version); ABS (wall-mounted version) Front panel foil Polyester Screws Stainless steel Cable glands PA (wall-mounted version) Electrical connections Terminals (panel-mounted version) or terminals via gland (wall-mounted version) Electrical data Power supply Panel-mounted version 13–30 V DC (V+) ± 10 %, filtered and regulated 12–30 V DC (V+) ± 10 %, filtered and regulated Wall-mounted version 13–30 V DC (V+) ± 10 %, filtered and regulated or 12–30 V DC (V+) ± 10 %, filtered and regulated or 115/230 V AC 50/60 Hz (see technical 115/230 V AC 50/60 Hz (see technical specifications 115/230 V AC) specifications 115/230 V AC) Reversal polarity of DC protected Current consumption without sensor ≤ 70 mA - transmitter with relays ≤ 70 mA - transmitter with relays (without consumption of pulse output) ≤ 30 mA - transmitter without relay ≤ 20 mA - transmitter without relay Sensor input Frequency range 0.5 Hz or 2.5 Hz up to 1400 Hz - 2.5 Hz up to 250 Hz max. voltage: 30 V DC Pulse “Low Power” (open collector NPN) Open collector NPN (with 470 Ω or 2.2 kΩ resistance) or PNP, Coil, TTL, CMOS (with 39 kΩ resistance) Sensor output Voltage supply 11...28 V DC (V+ - 2 V DC) or +12 V DC or 5 V DC 10–28 V DC (V+ - 2 V DC), (with a 13–30 V DC powered transmitter); +27 V DC or +12 V DC or 5 V DC (with a 115/230 V AC powered transmitter) Current consumption max. current available from transmitter: max. current available from transmitter: 100 mA 1 mA (internal limitation) Output Transmitter Signal current 4–20 mA, configurable in sourcing or sinking mode 4-20 mA (3-wire with relays; 2-wire without relay) max. loop impedance: 1200 Ω at 30 V DC; max. loop impedance: 900 Ω at 30 V DC; 900 Ω at 24 V DC; 450 Ω at 15 V DC; 600 Ω at 24 V DC; 50 Ω at 12 V DC; 300 Ω at 13 V DC; 800 Ω with a 115/230 V AC voltage supply 1000 Ω with a 115/230 V AC voltage supply Pulse polarized, potential free, 5...30 V DC; 100 mA, polarized, potential free, 5...30 V DC; 100 mA, protected, line drop at 100 mA: 1.5 V DC protected, line drop at 100 mA: 1.5 V DC Relay 2 relays, programmable, 3A, 230 V AC 2 relays, programmable, 3A, 230 V AC Technical specifications 115/230 V AC Wall-mounted version Supply voltage supply: 27 V DC regulated, Max. current: 250 mA Integrated protection: fuse 250 mA temporised Power: 6 VA Standards and approvals Protection class IP65 (panel-mounted and wall-mounted version) IP20 (panel-mounted version, inside the cabinet) Agreements CE CE Meyer Industrie-Electronic GmbH – MEYLE Carl-Bosch-Straße 8 49525 Lengerich/Germany Tel.: +49 54 81-93 85-0 Fax: +49 54 81-93 85-12 Internet: www.meyle.de E-Mail: sales@meyle.de 17
Page 1 and 2: Flow Sensors Analytical Sensors Flo
Page 3 and 4: CONTENTS General overview Interconn
Page 5 and 6: GENERAL OVERVIEW MyProc Interconnec
Page 7 and 8: INSERTION FLOW SENSOR MyProc MFS 02
Page 9 and 10: INSERTION FLOW SENSOR MyProc MFS 02
Page 11 and 12: DIGITAL FLOW TRANSMITTER MyProc MFT
Page 15: DIGITAL FLOW TRANSMITTER MyProc MFT
Page 19 and 20: DIGITAL BATCH CONTROLLER MyProc MFC
Page 27 and 28: INLINE FLOW SENSOR MyProc MFS 0252
Page 29 and 30: INLINE FLOW SENSOR MyProc MFS 0252
Page 43 and 44: ELECTROMAGNETIC FLOW TRANSMITTER My
Page 49 and 50: DIGITAL pH TRANSMITTER MyProc MPT 0
Page 61 and 62: DIGITAL pH CONTROLLER MyProc MPC 04
Page 67 and 68:
DIGITAL pH CONTROLLER MyProc MPC 04
Page 69 and 70:
DIGITAL pH CONTROLLER MyProc MPC 04
Page 71 and 72:
DIGITAL CONDUCTIVITY TRANSMITTER My
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
DIGITAL INDUCTIVE CONDUCTIVITY TRAN
Page 83 and 84:
DIGITAL INDUCTIVE CONDUCTIVITY TRAN
Page 85 and 86:
INSERTION FITTING FOR MyProc MAF 24
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
INLINE FITTING FOR MyProc MAF 252 A
Page 99 and 100:
INLINE FITTING FOR MyProc MAF 252 D
Page 101 and 102:
INLINE FITTING FOR MyProc MAF 252 D
Page 103 and 104:
INLINE FITTING FOR MyProc MAF 252 O
Page 105 and 106:
NOTES Meyer Industrie-Electronic Gm
Page 107 and 108:
Engineering, distribution and manuf
show all

conductivity - MEYER Industrie-Electronic GmbH

Create successful ePaper yourself

Delete template?

Save as template?