Web Offset printing - Megtec Systems

Roll & Web Handling
The industry’s standard matchspeed
splicer – core braking and
2 arms – was an original MEGTEC
development. MEGTEC splicers are
running on almost every printing
press model.
SE
There is a vast choice of models
from zero speed to the world’s most
advanced match-speed splicer. These
systems offer the highest splice
success rate obtainable, fewer web
breaks, simple splice preparation
and low maintenance. Roll handling
systems provide automatic or manual
roll transport, splice preparation and
loading.
MEGTEC core driven automatic turret
rewinders are used for continuous
reel to reel production producing a
high quality, uniformly wound and
low waste roll. The RW50B provides
the advantage of a compact and
cost effective solution for lower
speed applications while the RW70B
gives customers the ability to run at
high-speeds for 16-page commercial
applications.
Rewinder
Also available:
Integrated infeed and web steering
Roll loading – manual to fully
automatic
Non-contact air turning device
Web guides
Web stabilizers
SE
Z Series
RW50B
Zero speed splicer with reel shafts for single wide
newspaper and semi commercial heatset applications.
Web width 1020 mm (40”)
Maximum reel diameter 1270 mm (50”)
Roll weight
1135 – 1587 kg (2500-3500 lbs)
Maximum speed 6.6 – 7.6 m/s (1300 – 1500 fpm)
Zero speed splicer with reel shafts for commercial
heatset and book applications.
Web width 1020 - 1422 mm (40 - 56”)
Maximum reel diameter 1270 mm (50”)
Roll weight
1587 – 2268 kg (3500-5000 lbs)
Maximum speed 6.1 – 9.1 m/s (1200 – 1800 fpm)
Compact core driven autom
reel shafts for 8 to 16 page c
Web width 6
Maximum reel diameter
Reel core 76 mm (7
Roll weight
Maximum speed