eircom advantage IP Executive Phone

Advantage IP Executive Installation Guide
Step 5 Enter the address of the Advantage System
The private LAN IP address of the Advantage system is entered here. This is necessary to
allow the phone to connect to the Advantage system.
Enter Server IP:
Next
000.000.000.000
Press next when the IP address has been entered.
Step 6 Extension Name and PIN
The Advantage system administrator must allocate a unique extension name and extension PIN
to each IP phone connected to the system. The procedure for this is described in section 4 of
this document. This extension name and PIN must be entered in the Advantage IP Executive. If
you do not know the extension name and PIN, contact the system administrator and obtain
them. When the phone registers with the Advantage system through the LAN, this unique
extension name and PIN are authenticated.
At the prompts, enter the Extension Name from the phone keypad. Please pay particular
attention to upper case and lower case letters.
Extension Name
_
Next
Delete
Press Next and proceed to enter the Extension PIN.
Extension Pin
Enter Pin: _
Next
Press Next to proceed to step 7.
Step 7 Quality of Service
The last option in the wizard allows you to enable quality of service. Once you have answered
Yes or No to this question, the setup wizard is complete and the Advantage IP will attempt to
connect to the Advantage system.
Enable
Quality of Service
Yes
No
During this time the phone will display the message:
Connecting to
Advantage at
192.168.0.100
Please wait...
12