catalog

Recommendations

Info

#91630 SureShell Carrier and Rail for Remington 870 (6-shell, 12-GA, 5 inch) #93600 SureShell Carrier and Rail for Moss 500 with QD Swivel Clamp (6-shell, 12-GA, 20 in) Remington Mesa Tactical Saddle Rails for the Remington 870, 1100 and 11-87 are aluminum brackets that wrap around the top of the shotgun receiver, with a Picatinny optics rail at the top. The factory trigger pins are replaced by an internally threaded steel pin (in the rear) and paired Chicago screws (up front), to which both sides of the saddle rail are securely bolted. SureShell Saddle Rails feature a MIL-STD-1913 (NATO STANAG 4694) Picatinny sight rail along the top, and a four-, six- or eight-shot SureShell aluminum shotshell carrier yoke on the left side of the receiver. The rail is notched at the rear to accommodate Scattergun/Wilson style ghost ring sights, and extends to the front of the shotgun receiver (5 inch rail), 2¾ inches past the front of the receiver (8½ inch rail), or just beyond the barrel’s magazine lug (20 inch rail). The 20 inch rails are anchored at the front by a clamp. They are available with a barrel clamp or a magazine clamp, or no clamp at all (for customers who already have clamps). Receiver mount SureShell aluminum shotshell carriers for the Remington Versa Max semi-automatic shotgun feature mounting brackets with integral top Picatinny sight rails. These brackets are secured to the weapon using the top mounting screw holes. The SureShell aluminum shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good. No gunsmithing is required to install the SureShell Saddle Rail, except for optional forend alterations as described above under side mount carriers. Saddle Rails are also available without the shell carriers (see page 26). #93630 SureShell Carrier and Rail for Moss 500 (6-shell, 12-GA, 4 1/2 in) Mossberg These SureShell aluminum shotshell carriers for the Mossberg 500 and 590 feature mounting brackets with integral top Picatinny sight rails. The brackets are secured to the weapon using the top mounting screw holes found on Mossberg 500 and 590 shotguns made since 1997. The SureShell aluminum shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good. The 20 inch rails are anchored at the front by a magazine clamp that features either a short length of Picatinny accessory rail at the bottom, or a sling swivel stud. The front clamp interferes with the barrel lug on 18 inch Mossberg 590s, and so are incompatible with these platforms. Twenty inch Mossberg 590s fit just fine, however. 20 MESA TACTICAL CATALOG #20
Benelli While the Benelli M2 Tactical semi-automatic and Benelli SuperNova ® pump-action shotgun feature factory-tapped rail mounting holes in the top of the receiver, the Benelli M4 and M1014 are shipped with a top Picatinny sight rail. These provided us with an opportunity to develop SureShell aluminum shotshell carrier mounting solutions for Benelli shotguns that are streamlined and very robust. Receiver mount SureShell aluminum shotshell carriers for the Benelli M2, M4 and M1014 feature mounting brackets with integral top Picatinny sight rails. These brackets are secured to the weapon using the top mounting screw holes. The SureShell aluminum shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good. SureShell aluminum shotshell carriers for the Benelli M2 Tactical can be installed on Benelli M1 shotguns with round-top receivers by tapping the top of the shotgun receiver with #8-40 threads. Consult a gunsmith. Extra weight on the weapon may adversely affect the reliable cycling of inertia-operated shotguns such as the Benelli M1 or M2 when used with low-recoil ammunition. The Benelli M4 is gas-operated and has no such cycling sensitivity. Kel-Tec KSG The SureShell carrier system for the Kel-Tec KSG comprises a replacement anodized aluminum Picatinny optics rail which supports one or two machined shell carrier yokes. Small aluminum flanges on either side of the main rail can accept additional lengths of Picatinny rail to support weapon lights or targeting lasers (rail not included, see page 29). A pair of unique steel recoil blocks featuring angled set screws ensure the rail assembly is securely mounted to the shotgun. SureShell carriers for the Kel-Tec KSG feature four- or six-shell yokes, on the left side or right side or both sides. A replacement Picatinny rail without SureShell yokes is also available, (see page 27). #90880 SureShell Carrier and Rail for Benelli M4/M1014 (6-shell, 12-GA, 5 1/2 in) #91210 SureShell Carrier and Rail for Benelli M2 Tactical (4-shell, 12-GA, 4 1/2 in) #93000 SureShell Carrier and Rail for Kel-Tec KSG (12-shell, 12-GA, Both Sides) MADE IN USA www.MESATACTICAL.com 21
Page 2 and 3: Mesa Tactical is a manufacturer of
Page 4 and 5: Urbino Tactical Stock System • De
Page 6 and 7: #91780 Pocket Ambi Hook Loop for Ur
Page 8 and 9: MOHAWK Mohawk FOREND forend for se
Page 10 and 11: HIGH-TUBE TELESCOPING STOCK KIT •
Page 12 and 13: TELESCOPING STOCK KITS AND ADAPTERS
Page 14 and 15: #93890 LUCY 20 GA to 12 GA Stock A
Page 16 and 17: SIDE MOUNT SURESHELL ® ALUMINUM SH
Page 18 and 19: #90110 SureShell Carrier for FN SLP
Page 22 and 23: SURESHELL SHOTSHELL CARRIERS WITH R
Page 24 and 25: BARREL AND MAGAZINE CLAMPS • Prov
Page 26 and 27: #91620 Saddle Rail for Remington (1
Page 28 and 29: #91130 Adapter Mount Standard Profi
Page 30 and 31: HOOK LOOPS #90730 Ambi Hook Loop fo
Page 32: 1135 Baker Street Costa Mesa, CA 92

catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?