You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BERNELL SELLS VIGOR OPTICAL PLIERS AT A DISCOUNT<br />
WIDE JAW PLIERS<br />
P0450 $24.95<br />
Wide jaw opening allows easy access to<br />
hinge for pantoscopic angling. Hollow jaw<br />
ends protect screwhead.<br />
FINGER PIECE PLIERS<br />
P0060 $24.95<br />
Parallel jaws have recesses for screw heads<br />
to make adjusting temples or finger<br />
mountings easy.<br />
OPTICAL<br />
NUMONT PLIERS<br />
P0230 $24.95<br />
Holds Numont & nylon suspended frames<br />
when adjusting temple & end piece angle.<br />
Just one broken lens would cost more<br />
than these pliers!<br />
CHAIN/SNIPE NOSE PLIERS<br />
P0250 $24.95<br />
Small jaws are flat on the inside and<br />
rounded on the outside. Leaf spring.<br />
FLAT&ROUND NOSE PLIERS<br />
P0120 $24.95<br />
One round fine jaw and one narrow flat<br />
jaw is used to change the curvature of pad<br />
arm loops.<br />
EUROPEAN PAD ALIGNING<br />
P0510 $24.95<br />
Accommodates screw and snap base pad<br />
arms. Extra narrow jaw facilitates adjustment<br />
on high minus lenses.<br />
CHAPPEL CUTTING PLIERS<br />
P0650 $31.95<br />
Box joint and beveled “V” edges.<br />
CUTTER<br />
P0640 $30.95<br />
Highest quality Lindstrom cutter is very<br />
strong.<br />
NYLON JAW FLAT/RD NOSE<br />
Best<br />
P0790 $23.95 Seller<br />
Multi-purpose for metal frame adjustments<br />
on end pieces, pad arms, and eyewires.<br />
LENS AXIS PLIERS<br />
P0900 $32.50<br />
Long handle & deep throat for easy<br />
adjustments. Leaf spring loaded parallel<br />
jaws have thick rubber to protect lenses.<br />
NBS5001 $29.50<br />
Acrylic rack holds screwdrivers,<br />
screws, plyers, and<br />
other tools in an organized<br />
manner. Makes a good<br />
impression on your<br />
patients as well as more<br />
efficient workplace.<br />
4” High x 5.5” Deep<br />
by 11” Wide<br />
OPTICAL TOOL RACK<br />
REVERSIBLE SCREWDRIVER<br />
VSD775 $7.95<br />
Heavy knurled body permits grip and heavy pressure.<br />
Hexagon shaped head is rounded to comfortably fit in the<br />
palm of your hand. Head rotates freely. Clip spring holds a<br />
double-end blade .085 to .060, 4-1/2" long. Nickel finish.<br />
Comes with narrow and wide combination regular blade.<br />
Replacement Blades: Narrow Blade 1.55mm<br />
VSD7754 (PKG. OF 3) $7.75<br />
Double-Sided Regular Blade: 1.55mm on one<br />
side and 2.20mm on the other side.<br />
VSD7755 (PKG. OF 3) $7.75<br />
TEMPLE SPRING<br />
ALIGNMENT TOOL<br />
GS7400 $71.95<br />
This new improvement on the<br />
design holds the hinge open and<br />
the spring back so that you can put<br />
the screw back in easily.<br />
NEW<br />
DESIGN!<br />
NYLO HOOK<br />
RE2600 $6.25<br />
Simplifies rimless assembly.<br />
Eliminates the use of ribbon. The<br />
“hook” guides the eye wire into the<br />
lens groove without difficulty.<br />
SCREWGUIDE TWEEZERS<br />
SA1050 $19.95<br />
These hold the screws when installing<br />
in a frame.<br />
Shows the temple clamped securely<br />
in the vise grip jaws of the pliers.<br />
The pliers must be adjusted tight<br />
enough to hold the temple so that it<br />
does not move when the prying<br />
tool stretches the temple spring.<br />
Shows the temple spring<br />
stretched and held<br />
extended by the pressure<br />
of the holding screw on<br />
the temple hinge.<br />
Shows the front of the frame aligned with the temple<br />
hinge so that the holes are also aligned and ready for the<br />
insertion of the temple screw.<br />
Save time and frustration!<br />
42 FAX ORDERS TO SAVE TIME & MONEY AT (574)259-2102 OR 2103 OR GO TO www.bernell.com