Creating-Custom-Drivers-for-APQ8060-Dragonboard-BSQUARE

More documents

Recommendations

Info

Installing the Android Image on the <strong>APQ8060</strong> • To enable your system to recognize the DragonBoard you will need to add this line to the 51-android.rules file – SUBSYSTEM=="usb",SYSFS{idVendor}=="05c6", MODE="0666” • If the file does not exists in this location /etc/udev/rules.d/51-android.rules you will need to create it.
Installing Android Image on the <strong>APQ8060</strong> • Power on the DragonBoard • Connect USB to your DragonBoard – Test connection to DragonBoard • adb devices – You should see a device listed: • adb reboot bootloader
Page 1 and 2: Creating Custom Drivers for the Sna
Page 3 and 4: Qualcomm APQ8060 Development Board
Page 5 and 6: What’s in the APQ8060 Development
Page 7 and 8: Developing a Custom Driver for the
Page 9: Building the Android Source Release
Page 13 and 14: Running your Android Image • Once
Page 15 and 16: Custom Device Driver Development
Page 21 and 22: Adding the new driver to the build
Page 23 and 24: Add the New Device to Your Board fi
Page 25 and 26: BSQUARE End-to-end Service Offering
Page 27 and 28: BSQUARE: Enabling the Next Generati

Creating-Custom-Drivers-for-APQ8060-Dragonboard-BSQUARE

Create successful ePaper yourself

Delete template?

Save as template?