Petri Dish Inserts - Bioscience Tools
Petri Dish Inserts - Bioscience Tools
Petri Dish Inserts - Bioscience Tools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Miniature<br />
Holders<br />
Call 1-877-853-9755<br />
Adjustable Clamps for<br />
Fragile Accessories<br />
Modular Design<br />
Holds Sensors, Electrodes, Tubing and Pipettes<br />
Use with any perfusion system<br />
Use with any microscope<br />
Compatible with Imaging setups and Electrophysiology stations<br />
Miniature Multi-Holder MH-2<br />
Holds multiple tubing, electrodes and pipettes around your sample chamber. This miniature holder can<br />
be attached to microscope adapters or any magnetic surfaces. It can be also attached to any surface using<br />
included standoffs (M3 or 4-40 thread). The holder includes a number of extension arms, each 1 in. long,<br />
two double clamps for fragile accessories, and two ball joints. The extensions are attached using thumb<br />
screws, which allow easy configurations and adjustments of tilt, swing, and rotation angles in multiple<br />
axes. On the next page are possible configurations made using the included parts, plus all configurations<br />
possible with MTH and MH- holders. Item#: MH-2<br />
• Foot print: mm<br />
• Extensions: x in. long and x right-angle<br />
• Ball-joints: x<br />
• Tubing clamps: x , and x double-clamps<br />
Adjustable Tubing/Electrode Holder MTH<br />
• Mounting: Magnetic, M3, # - 0, M6 and<br />
# / - 0 threaded surfaces, and surfaces with<br />
through holes (optional MH-SCR adapter<br />
might be required).<br />
Position multiple tubing, probes, glass capillaries and electrodes around your sample chamber. This<br />
miniature holder can be attached to a microscope adapter or any magnetic surfaces. Several holders can be<br />
placed on the same adapter. The holder includes a number of extension arms, ball joint and double-clamp<br />
for fragile accessories (electrodes for example). Each arm adds approx. 1 in. to extend. The extensions are<br />
attached using thumb screws, which allow easy configurations and adjustments of tilt, swing, and rotation<br />
angles in multiple axes. Below are possible configurations. No extra tools are needed. Simply put the<br />
holder on any iron surface and the strong magnet will keep the tubing and other accessories firmly in place<br />
7