Petri Dish Inserts - Bioscience Tools

More documents

Recommendations

Info

anywhere around your sample. The base of the holder is only 0.75in. diameter. The magnetic bottom is covered with Teflon film to move the holder easily along metal surfaces. Comes with standoffs to mount on M6 or 1/4-20 threaded surfaces without magnet. Comes with adhesive magnetic strip to attach the holders even to non magnetic and plastic surfaces. Can be used with perfusion, controlled flow and micro- perfusion systems as well as to hold electrodes. On the next page are possible configurations made using the included parts, plus all configurations possible with MH-1 holders Item#: MTH • Foot print: 18mm • Extensions: x2 1in. long, x1 right-angle, x1 mounting 4mm rod. with double clamp. • Ball-joint: x1 • Tubing clamp: x1 and x1 double-clamp • Mounting: Magnetic, M6, and #1/4-20 threaded surfaces, and surfaces with through holes (optional MH-SCR adapter might be required). Magnetic Holder with Suction Tubing MTH-S Comes with stainless steel suction tubing to provide smooth solution removal from perfusion chambers, if connected to an outflow unit. Two thumb screws adjust tubing height (tilt) and length. No extra tools are needed. Simply put the holder on any iron surface and the strong magnet will keep the tubing firmly in place anywhere around your sample. If you do not have suitable surface available, use a magnetic adhesive strip provided or accessories below. The suction tubing can be replaced with any custom tubing up to 4mm diameter. Can be used with perfusion systems. Can be mounted on M6 and 1/4-20 threaded surfaces using included adapters. Item#: MTH-S • Foot print: 18mm • Tilt: Adjustable • Length: Adjustable, up to 1.5in.. • Fit: Designed to work with any bath chamber, including petri dishes. • Mounting: Magnetic, M6, and #1/4-20, M3, and #4-40 threaded surfaces, and surfaces with through holes (optional MH-SCR adapter might be required). Miniature Manifold on Adjustable Micropositioner, MMH-MM This 8-channel micro-manifold for single cell/small tissue superfusion comes mounted on 3-D fine micropositioner with 12mm working distance in all axes and micron resolution. If you do not have a magnetic surface, the assembly can be mounted using provided screws adapters. Micro-manifolds are used to achieve fast solution application to small samples (single cells, for example). Due to the small size of the sample, solution exchange around the sample can happen in as fast as few ms. The micro-manifolds also offer advantage of not contaminating the whole bath chamber, but applying the substances locally (provided that perfusion chamber is used with frequent wash). Comes with three replaceable threaded tips of 360, 250 and 100 micron I.D. for single cell and small tissue superfusion. Incorporates 2 ft. long Teflon tubing for direct connection to perfusion systems. Inside Teflon tubing is easy to wash. The threaded replaceable tips are washable and allow you to use the manifold with solutions under higher pressure. The length of tips is around 1 in., and can be cut to the required length. Incorpo- rates 10cm long 4mm O.D. rod to mount on miniature manipulators and 7mm O.D. adapter to mount on regular manipulators. Incorporates eight separate channels. If used with less than 8 different solutions, multiple channels can be filled with the same solution, for faster wash-out for example. Requires a perfusion system. Can be used with small volume delivery systems, SVDS1. Includes two nozzles to use with small volume chambers as a regular manifold (the rod fits inside magnetic holders MTH). Item#: MMH- MM • Channels: 8-channel, 360 micron • Output: replaceable 100, 250 and 360 micron tips, and two barbed nozzles • 3-D adjustment: 12mm in all three axes, micron resolution, tilt adjust for Z-axis 18 www.biosciencetools.com
Call 1-877-853-9755 The Smallest Holder, MH-1 The base of this ultra-small magnetic holder is only 8mm wide. Includes extensions arms and a ball joint. Thumb screws are used to adjust height, tilt and angle. Extends up to in. long. Can be used with perfusion, controlled flow and micro-perfusion systems, as well as to hold temperature sensors and electrodes. Includes screw-type adapters to mount on any surface with M3 or 4-40 threaded holes. Item#: MH-1 • Foot print: mm • Extensions: x in. long, and x right-angle • Ball joint: x . • Tubing clamp: x • Mounting: Magnetic, M3, and # - 0 threaded surfaces. Configurations Made Using Parts Included with MTH System 9
Page 1 and 2: Petri Dish Inserts Call 1-877-853-9
Page 3 and 4: Call 1-877-853-9755 Shown here is a
Page 5 and 6: Coverslip Chambers Call 1-877-853-9
Page 7 and 8: Call 1-877-853-9755 The chamber fit
Page 9 and 10: Call 1-877-853-9755 used for imagin
Page 11 and 12: Call 1-877-853-9755 precision thick
Page 13 and 14: Call 1-877-853-9755 Adapter for PI
Page 15 and 16: Call 1-877-853-9755 Universal Micro
Page 17: Miniature Holders Call 1-877-853-97
Page 21 and 22: Call 1-877-853-9755 Zero-Dead Volum
Page 23 and 24: Call 1-877-853-9755 Miniature Right
Page 25 and 26: Call 1-877-853-9755 Miniature micro
Page 27 and 28: Temperature Control Heated Microsco
Page 29 and 30: Call 1-877-853-9755 Showen here is
Page 31 and 32: Call 1-877-853-9755 Large Volume/Mi
Page 33 and 34: Call 1-877-853-9755 Adjustable Heat
Page 35 and 36: Call 1-877-853-9755 36.98 36.5 37.0
Page 37 and 38: Call 1-877-853-9755 Cooling & Heati
Page 39 and 40: Call 1-877-853-9755 Sink Cooling Un
Page 41 and 42: Perfusion Systems Miniature Systems
Page 43 and 44: Call 1-877-853-9755 The majority of
Page 45 and 46: Call 1-877-853-9755 controller, mak
Page 47 and 48: Call 1-877-853-9755 Accessories Add
Page 49 and 50: Call 1-877-853-9755 Cylinder to Pre
Page 51 and 52: Flow Control Call 1-877-853-9755 Mi
Page 53 and 54: Call 1-877-853-9755 2-Channel Flow
Page 55 and 56: Small Volume Delivery Systems Call
Page 57 and 58: Perfusion Accessories Call 1-877-85
Page 59 and 60: Call 1-877-853-9755 Luer-Lock Manif
Page 61 and 62: Call 1-877-853-9755 Tubing and Fitt
Page 63 and 64: Oocyte Chambers Call 1-877-853-9755
Page 65 and 66: Protocol Automation Call 1-877-853-

Petri Dish Inserts - Bioscience Tools

Create successful ePaper yourself

Delete template?

Save as template?