International SeeTouch QS Keypad - Lutron Lighting Installation ...
International SeeTouch QS Keypad - Lutron Lighting Installation ...
International SeeTouch QS Keypad - Lutron Lighting Installation ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>International</strong><br />
Wallstations<br />
<strong>QS</strong>WE-2BN-___-___<br />
<strong>QS</strong>WE-2BI-___-___<br />
2-Button Wallstation<br />
<strong>QS</strong>WE-2BN-WH-EGN<br />
(Non-insert version)<br />
1<br />
Color and Engraving Codes<br />
Off<br />
LEDs<br />
Engraving<br />
369273a 06.22.10<br />
Description<br />
• Often used in entryways to select Scene 1 and Off.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy<br />
reading.<br />
• Options for programming buttons after installation (choose one):<br />
- Recalls preset light levels for two scenes: 1 and Off, 5 and Off,<br />
9 and Off, 13 and Off, 1 and 2, 5 and 6, 9 and 10, 13 and 14.<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect door status of one partition.<br />
- Starts or stops one sequence (Scenes 1-4 or 5-16 sequence).<br />
- Disables keypads and makes lights go to Scene 16.<br />
- Allows fine-tuning of a group of zones.<br />
• Receives up to two contact closure inputs via a connector on<br />
the back of the Wallstation.<br />
• Contact closure features:<br />
- When keypad is programmed as scene, panic, zone toggle or<br />
sequence, input 1 closure will perform the top button action,<br />
and input 2 closure will perform the bottom button action.<br />
- When keypad is programmed as a partition control, input 1<br />
and input 2 closures will open the partition, and input 1 and<br />
input 2 openings will close the partition.<br />
- When keypad is programmed to fine-tune, input 1 controls<br />
raising (closure = start; opening = stop) and input 2 controls<br />
lowering (closure = start; opening = stop).<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Custom button engraving (NST; see page 3) available.<br />
• Three engraving options are available: General Engraving (EGN)<br />
and Non-Standard Text Engraving (NST). For more details,<br />
please visit the GRAFIK Eye® <strong>QS</strong> website at<br />
www.lutron.com/grafikeyeqs<br />
<strong>QS</strong>WE-2BI-WH<br />
(Insert version)<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
Color and Engraving Codes<br />
<strong>QS</strong>WE-3BN-___-___<br />
<strong>QS</strong>WE-3BI-___-___<br />
3-Button Wallstation<br />
<strong>QS</strong>WE-3BN-WH-EGN<br />
(Non-insert version)<br />
1<br />
2<br />
Off<br />
LEDs<br />
Engraving<br />
369273a 06.22.10<br />
Description<br />
• Often used to select scenes.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy<br />
reading.<br />
• Options for programming buttons after installation (choose one):<br />
- Recalls preset light levels for scenes (1-3, 5-7, 9-11, 13-15; or<br />
1, 2, and Off; 5, 6, and Off; 9, 10, and Off, 13, 14, and Off).<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect door status of three partitions.<br />
• Receives up to two contact closure inputs via a connector on<br />
the back of the Wallstation.<br />
• Contact closure features:<br />
- When keypad is programmed as scene or zone toggle, input 1<br />
closure will perform the top button action, and input 2 closure<br />
will perform the bottom button action.<br />
- When keypad is programmed as a partition control, input 1<br />
controls the partition programmed to the top button (closure =<br />
open partition; opening = close partition) and input 2 controls<br />
the partition programmed to the bottom button (closure = close<br />
partition; opening = open partition).<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Custom button engraving (NST; see page 3) available.<br />
• Three engraving options are available: General Engraving (EGN)<br />
and Non-Standard Text Engraving (NST). For more details,<br />
please visit the GRAFIK Eye® <strong>QS</strong> website at<br />
www.lutron.com/grafikeyeqs<br />
<strong>QS</strong>WE-3BI-WH<br />
(Insert version)<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
Color and Engraving Codes<br />
<strong>QS</strong>WE-4BN-___-___<br />
<strong>QS</strong>WE-4BI-___-___<br />
4-Button Wallstation<br />
<strong>QS</strong>WE-4BN-WH<br />
(Non-insert version)<br />
LEDs<br />
369273a 06.22.10<br />
Description<br />
• Often used to select scenes; often to select between 4 scenes<br />
and Off.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy<br />
reading.<br />
• Options for programming buttons after installation (choose one):<br />
- Recalls preset light levels for scenes (1-4, 5-8, 9-12, 13-16; or<br />
1-3 and Off, 5-7 and Off, 9-11 and Off, 13-15 and Off).<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect door status of four partitions.<br />
• Receives up to two contact closure inputs via a connector on<br />
the back of the Wallstation.<br />
• Contact closure features:<br />
- When keypad is programmed as scene or zone toggle, input<br />
1 closure will perform the top-left button action, and input 2<br />
closure will perform the bottom-right button action.<br />
- When keypad is programmed as a partition control, input 1<br />
controls the partition programmed to the top button (closure =<br />
open partition; opening = close partition) and input 2 controls<br />
the partition programmed to the bottom button (closure = open<br />
partition; opening = close partition).<br />
1<br />
2<br />
3<br />
Off<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Custom button engraving (NST; see page 3) available.<br />
• Three engraving options are available: General Engraving (EGN)<br />
and Non-Standard Text Engraving (NST). For more details,<br />
please visit the GRAFIK Eye® <strong>QS</strong> website at<br />
www.lutron.com/grafikeyeqs<br />
Engraving<br />
<strong>QS</strong>WE-4bI-WH-EGN<br />
(Insert version)<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
Color and Engraving Codes<br />
<strong>QS</strong>WE-5BRLN-___-___<br />
<strong>QS</strong>WE-5BRLI-___-___<br />
5-Button Wallstation with<br />
Raise/Lower<br />
<strong>QS</strong>WE-5BRLN-WH-EGN<br />
(Non-insert version)<br />
<strong>QS</strong>WE-5BRLI-WH-E01<br />
(Insert version)<br />
1<br />
2<br />
3<br />
4<br />
Off<br />
Open<br />
Preset 1<br />
Preset 2<br />
Preset 3<br />
Close<br />
LEDs<br />
Scene<br />
Selection<br />
Buttons<br />
Engraving<br />
Master Raise/Lower<br />
369273a 06.22.10<br />
Description<br />
• Often used to select and adjust scenes.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy<br />
reading.<br />
• Master raise/lower brightens or dims all lighting or raises/lowers<br />
all assigned shades in the last selected scene or toggled group.<br />
• Options for programming buttons after installation (choose one):<br />
- Recalls preset light levels for scenes (1-4 and Off, 5-8 and Off,<br />
9-12 and Off, 13-16 and Off, or 1-5, 5-9, or 9-13).<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect door status of five partitions.<br />
• Shade control features:<br />
- Can control Sivoia® <strong>QS</strong> Window Treatments.<br />
- Pressing the Open (or Close) button once will cause the<br />
window treatments to move to their fully open (or closed)<br />
position. Tap any button (regardless of function) to stop a<br />
shade that is in motion.<br />
• Receives up to two contact closure inputs via a connector on<br />
the back of the Wallstation.<br />
• Contact closure features:<br />
- When keypad is programmed as scene, zone toggle, or shade<br />
control, input 1 closure will perform the top button action, and<br />
input 2 closure will perform the bottom button action.<br />
- When keypad is programmed as a partition control, input 1<br />
controls the partition programmed to the top button (closure =<br />
open partition; opening = close partition) and input 2 controls<br />
the partition programmed to the bottom button (closure =<br />
close partition; opening = open partition).<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Available with button engraving that can be customized for<br />
lighting and/or shade applications on any model.<br />
• Three engraving options are available: General Engraving (EGN),<br />
Standard Engraving (E01), and Non-Standard Text Engraving<br />
(NST). For more details, please visit the GRAFIK Eye® <strong>QS</strong><br />
website at www.lutron.com/grafikeyeqs<br />
• E01 engraving option allows control of one group of shades. See<br />
page 3 for NST control options.<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
<strong>QS</strong>WE-5BRLIRN-___-___<br />
<strong>QS</strong>WE-5BRLIRI-___-___<br />
5-Button Wallstation with<br />
Infrared Receiver and Raise/Lower<br />
<strong>QS</strong>WE-5BRLIRN-WH-EGN<br />
(Non-insert version)<br />
<strong>QS</strong>WE-5BRLIRI-WH-E01<br />
(Insert version)<br />
1<br />
2<br />
3<br />
4<br />
Off<br />
Open<br />
Preset 1<br />
Preset 2<br />
Preset 3<br />
Close<br />
Color and Engraving Codes<br />
LEDs<br />
Scene Selection<br />
Buttons<br />
Engraving<br />
IR Window<br />
Master Raise/<br />
Lower<br />
369273a 06.22.10<br />
Description<br />
• Often used to select and adjust scenes.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy<br />
reading.<br />
• Master raise/lower brightens or dims all lighting or raises/lowers<br />
all assigned shades in the last selected scene or toggled group.<br />
• Options for programming buttons after installation (choose one):<br />
- Recalls preset light levels for scenes (1-4 and Off, 5-7 and Off,<br />
9-11 and Off, 13-15 and Off or 1-5, 5-9, or 9-13).<br />
- Recalls preset light levels for 4 scenes plus Off with<br />
4-scene Wireless Remote Control (GRX-IT), or 8 scenes plus<br />
Off with 8-scene Wireless Remote Control (GRX-8IT).<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect door status of five partitions.<br />
• Shade control features:<br />
- Can control Sivoia® <strong>QS</strong> Window Treatments.<br />
- Also controls shades with wireless IR controllers<br />
SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT, and SVQ-4S2G-IT.<br />
- Pressing the Open (or Close) button once will cause the<br />
window treatments to move to their fully open (or closed)<br />
position. Tap any button (regardless of function) to stop a<br />
shade that is in motion.<br />
• Receives up to two contact closure inputs via a connector on<br />
the back of the Wallstation.<br />
• Contact closure features:<br />
- When keypad is programmed as scene, zone toggle, or shade<br />
control, input 1 closure will perform the top button action, and<br />
input 2 closure will perform the bottom button action.<br />
- When keypad is programmed as a partition control, input 1<br />
controls the partition programmed to the top button (closure =<br />
open partition; opening = close partition) and input 2 controls<br />
the partition programmed to the bottom button (closure =<br />
close partition; opening = open partition).<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Available with button engraving that can be customized for<br />
lighting and/or shade applications on any model.<br />
• Three engraving options are available: General Engraving (EGN),<br />
Standard Engraving (E01), and Non-Standard Text Engraving<br />
(NST). For more details, please visit the GRAFIK Eye® <strong>QS</strong><br />
website at www.lutron.com/grafikeyeqs<br />
• E01 engraving option allows control of one group of shades. See<br />
page 3 for NST control options.<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
Color and Engraving Codes<br />
<strong>QS</strong>WE-6BRLN-___-___<br />
<strong>QS</strong>WE-6BRLI-___-___<br />
Dual Wallstation with 3-Button<br />
and 3-Button with Raise/Lower<br />
Group 1<br />
Group 2<br />
Group 3<br />
<strong>QS</strong>WE-6BRLN-WH-E01<br />
(Non-insert version)<br />
1<br />
2<br />
Off<br />
Open<br />
Preset<br />
Close<br />
Open<br />
Preset<br />
Close<br />
<strong>QS</strong>WE-6BRLI-WH-EGN<br />
(Insert version)<br />
LEDs<br />
Engraving<br />
Raise/Lower<br />
369273a 06.22.10<br />
Description<br />
• Often used to control one or more lighting or window treatment<br />
zones simultaneously.<br />
• Often used to select three different groups of shades using Open,<br />
Close, and Raise/Lower.<br />
- Used to control multiple groups of shades independently from<br />
a single-gang keypad (e.g., a window with a sheer shade and a<br />
blackout shade).<br />
• Can control Sivoia® <strong>QS</strong> Window Treatments.<br />
• Functions as two independently programmable controllers: a<br />
3-button (left keypad group) and a 3-button (right keypad group).<br />
Can control two lighting zones, two shade zones, or one of each.<br />
Or can function as one shade group control where the right<br />
keypad controls the group of shades indicated by the left keypad.<br />
• Options for programming buttons of left three-button keypad<br />
group after installation (choose one):<br />
- Recalls preset light levels for scenes (1, 2, and Off; 5, 6, and Off;<br />
9, 10, and Off; 13, 14, and Off; or 1-3, 5-7, 9-11, or 13-15).<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect door status of three partitions.<br />
• Options for programming buttons of right two-button keypad after<br />
installation (choose one):<br />
- Recalls preset light levels for scenes (1, 2, and Off; 5, 6, and Off;<br />
9, 10, and Off; 13, 14, and Off; or 1-3, 5-7, 9-11, or 13-15). And<br />
raise/lower last preset activated.<br />
- Each button will toggle a zone or a group of zones. Raise/lowers<br />
affect last toggled zone.<br />
- Control a group of shades.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with on-button engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy reading.<br />
• Pressing the Open (or Close) button once will cause the window<br />
treatments to move to their fully open (or closed) position. Tap any<br />
button (regardless of function) to stop a shade that is in motion.<br />
• The LEDs next to each button are used during programming and<br />
provide feedback when the buttons are pressed.<br />
• Receives up to two contact closure inputs via a connector on the<br />
back of the Wallstation.<br />
• Contact closure features:<br />
- When the left keypad group is programmed as scene, zone toggle,<br />
or shade control, input 1 closure will perform the top button<br />
action, and input 2 closure will perform the bottom button action.<br />
- When the left keypad is programmed as a partition control, input<br />
1 controls the partition programmed to the top button (closure<br />
= open partition; opening = close partition) and input 2 controls<br />
the partition programmed to the bottom button (closure = close<br />
partition; opening = open partition).<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Available with button engraving that can be customized for lighting<br />
and/or shade applications on any model.<br />
• Three engraving options are available: General Engraving (EGN),<br />
Standard Engraving (E01), and Non-Standard Text Engraving<br />
(NST). For more details, please visit the GRAFIK Eye® <strong>QS</strong> website<br />
at www.lutron.com/grafikeyeqs<br />
• E01 engraving option allows control of three groups of shades.<br />
See page 3 for NST control options.<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
Color and Engraving Codes<br />
<strong>QS</strong>WE-7BRLN-___-___<br />
<strong>QS</strong>WE-7BRLI-___-___<br />
7-Button Wallstation with<br />
Raise/Lower<br />
1<br />
Off<br />
<strong>QS</strong>WE-7BRLN-WH-EGN<br />
(Non-insert version)<br />
Group 1<br />
Group 2<br />
<strong>QS</strong>WE-7BRLI-WH-E01<br />
(Insert version)<br />
1<br />
2<br />
3<br />
4<br />
Off<br />
Open<br />
Preset 1<br />
Preset 2<br />
Preset 3<br />
Close<br />
LEDs<br />
Scene<br />
Selection<br />
Buttons<br />
Engraving<br />
Master Raise/Lower<br />
369273a 06.22.10<br />
Description<br />
• Often used to select and adjust scenes.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy reading.<br />
• Master raise/lower brightens or dims all lighting or raises/lowers<br />
all assigned shades in the last selected scene or toggled group.<br />
• Functions as two independently programmable controllers: a<br />
2-button (left keypad group) and a 5-button (right keypad group).<br />
Can control two lighting zones, two shade zones, or one of each.<br />
Or can function as one shade group control where the right keypad<br />
controls the group of shades indicated by the left keypad.<br />
• Options for programming right column buttons after installation<br />
(choose one):<br />
- Recalls preset light levels for scenes (1-4 and Off, 5-8 and Off,<br />
9-12 and Off, 13-16 and Off or 1-5, or 5-9 or 9-13).<br />
- Each button will toggle a zone or a group of zones.<br />
• Options for programming left column buttons after installation<br />
(choose one):<br />
- Recalls preset light levels for scenes (1 and Off; 5 and Off;<br />
9 and Off, 13 and Off; or 1, 2; or 5, 6; or 9, 10; or 13, 14).<br />
- LEDs reflect status of one partition.<br />
- Starts or stops one sequence.<br />
- Disables keypads and goes to scene 16.<br />
- Allows fine-tuning of a group of zones.<br />
• Shade control features:<br />
- Used to control multiple groups of shades independently from<br />
a single-gang keypad (e.g., a window with a sheer shade and<br />
a blackout shade).<br />
- Can control Sivoia® <strong>QS</strong> Window Treatments.<br />
- Pressing the Open (or Close) button once will cause the window<br />
treatments to move to their fully open (or closed) position. Tap any<br />
button (regardless of function) to stop a shade that is in motion.<br />
• Receives up to two contact closure inputs via a connector on<br />
the back of the Wallstation.<br />
• Contact closure features:<br />
- When the left keypad is programmed as scene or zone toggle, or<br />
shade control, input 1 closure will perform the top button action,<br />
and input 2 closure will perform the bottom button action.<br />
- When the left keypad is programmed as a partition control,<br />
input 1 controls the partition programmed to the top button<br />
(closure = open partition; opening = close partition) and input<br />
2 controls the partition programmed to the bottom button<br />
(closure = close partition; opening = open partition).<br />
• Functions as two independently programmable controllers when<br />
general engraving or no engraving are ordered. Left keypad<br />
function mimics a 2-button keypad and right keypad mimics a<br />
5-button keypad. See function details on page 5.<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Available with button engraving that can be customized for<br />
lighting and/or shade applications on any model.<br />
• Three engraving options are available: General Engraving (EGN),<br />
Standard Engraving (E01), and Non-Standard Text Engraving<br />
(NST). For more details, please visit the GRAFIK Eye® <strong>QS</strong><br />
website at www.lutron.com/grafikeyeqs<br />
• E01 engraving option allows control of two groups of shades.<br />
See page 3 for NST control options.<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
<strong>QS</strong>WE-8BRLN-___-___<br />
<strong>QS</strong>WE-8BRLI-___-___<br />
8-Button Wallstation with<br />
Raise/Lower<br />
1<br />
2<br />
Off<br />
<strong>QS</strong>WE-8BRLN-WH-EGN<br />
(Non-insert version)<br />
Group 1<br />
Group 2<br />
Group 3<br />
<strong>QS</strong>WE-8BRLI-WH-E01<br />
(Insert version)<br />
Open<br />
Color and Engraving Codes<br />
Preset 1<br />
Preset 2<br />
Preset 3<br />
Close<br />
Open<br />
Preset 1<br />
Preset 2<br />
Preset 3<br />
Close<br />
LEDs<br />
Scene<br />
Selection<br />
Buttons<br />
Engraving<br />
Master Raise/Lower<br />
369273a 06.22.10<br />
Description<br />
• Often used to select and adjust scenes.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy reading.<br />
• Master raise/lower brightens or dims all lighting or raises/lowers all<br />
assigned shades in the last selected scene or toggled group.<br />
• Functions as two independently programmable controllers: a 3-button<br />
(left keypad group) and a 5-button (right keypad group). Can control<br />
two lighting zones, two shade zones, or one of each. Or can function<br />
as one shade group control where the right keypad controls the group<br />
of shades indicated by the left keypad.<br />
• Options for programming the right column of buttons after<br />
installation (choose one):<br />
- Recalls preset light levels for scenes (1-4 and Off, 5-8 and Off,<br />
9-12 and Off, 13-16 and Off; or 1-5, or 5-9, or 9-13).<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect status of five partitions.<br />
- Can control Sivoia® <strong>QS</strong> Window Treatments.<br />
• Options for programming the left column of buttons after<br />
installation (choose one):<br />
- Recalls preset light levels for scenes (1, 2, and Off; 5, 6, and Off; 9,<br />
10, and Off; 13, 14, and Off; or 1-3, or 5-7, or 9-11, or 13-15)<br />
- Each button will toggle a zone or a group of zones.<br />
- Used to control multiple groups of shades independently from<br />
a single-gang keypad (e.g., a window with a sheer shade and a<br />
blackout shade).<br />
- Can control Sivoia <strong>QS</strong> Window Treatments.<br />
- Pressing the Open (or Close) button once will cause the window<br />
treatments to move to their fully open (or closed) position. Tap<br />
any button (regardless of function) to stop a shade that is in<br />
motion.<br />
• Receives up to two contact closure inputs via a connector on the<br />
back of the Wallstation.<br />
• Contact closure features:<br />
- When the left keypad is programmed as scene or zone toggle, or<br />
shade control, input 1 closure will perform the top button action, and<br />
input 2 closure will perform the bottom button action.<br />
- When left keypad is programmed as a partition control, input 1<br />
controls the partition programmed to the top button (closure =<br />
open partition; opening = close partition)<br />
and input 2 controls the partition programmed to the bottom<br />
button (closure = open partition; opening = close partition).<br />
• Functions as two independently programmable controllers when<br />
general engraving or no engraving are ordered. Left keypad function<br />
mimics a 3-button keypad and right keypad mimics a 5-button<br />
keypad. See function details on page 5.<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Available with button engraving that can be customized for lighting<br />
and/or shade applications on any model.<br />
• Three engraving options are available: General Engraving (EGN),<br />
Standard Engraving (E01), and Non-Standard Text Engraving<br />
(NST). For more details, please visit the GRAFIK Eye® <strong>QS</strong> website<br />
at www.lutron.com/grafikeyeqs<br />
• E01 engraving option allows control of three groups of shades.<br />
See page 3 for NST control options.<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
<strong>QS</strong>WE-8BRLIRN-___-___<br />
<strong>QS</strong>WE-8BRLIRI-___-___<br />
8-Button Wallstation with<br />
Infrared Receiver and Raise/Lower<br />
1<br />
2<br />
Off<br />
<strong>QS</strong>WE-8BRLIRN-WH-EGN<br />
(Non-insert version)<br />
Group 1<br />
Group 2<br />
Group 3<br />
Job Name:<br />
Job Number:<br />
Open<br />
Preset 1<br />
Preset 2<br />
Preset 3<br />
Close<br />
Open<br />
<strong>QS</strong>WE-8BRLIRI-WH-E01<br />
(Insert version)<br />
Preset 1<br />
Preset 2<br />
Preset 3<br />
Close<br />
Color and Engraving Codes<br />
LEDs<br />
Scene Selection<br />
Buttons<br />
Engraving<br />
IR Window<br />
Master Raise/<br />
Lower<br />
Model Numbers:<br />
369273a 06.22.10<br />
Description<br />
• Often used to select and adjust scenes.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and operate<br />
the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy reading.<br />
• Master raise/lower brightens or dims all lighting or raises/lowers all<br />
assigned shades in the last selected scene or toggled group.<br />
• Functions as two independently programmable controllers: a 3-button (left<br />
keypad group) and a 5-button (right keypad group). Can control two lighting<br />
zones, two shade zones, or one of each. Or can function as one shade<br />
group control where the right keypad controls the group of shades indicated<br />
by the left keypad.<br />
• Options for programming the right column of buttons after installation<br />
(choose one):<br />
- Recalls preset light levels for scenes (1-4 and Off, 5-7 and Off, 9-11<br />
and Off, 13-15 and Off or 1-5, or 5-9, or 9-13).<br />
- Recalls preset light levels for 4 scenes plus Off with 4-scene Wireless<br />
Remote Control (GRX-IT), or 8 scenes plus Off with 8-scene Wireless<br />
Remote Control (GRX-8IT).<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect door status of five partitions.<br />
• Options for programming the left column of buttons after installation<br />
(choose one):<br />
- Recalls preset light levels for scenes (1, 2, and Off; 5, 6, and Off; 9, 10, and<br />
Off; 13, 14, and Off; or 1-3, or 5-7, or 9-11, or 13-15)<br />
- Each button will toggle a zone or a group of zones.<br />
- Used to control multiple groups of shades independently from a singlegang<br />
keypad (e.g., a window with a sheer shade and a blackout shade).<br />
- Can control Sivoia® <strong>QS</strong> Window Treatments.<br />
- Pressing the Open (or Close) button once will cause the window<br />
treatments to move to their fully open (or closed) position. Tap any button<br />
(regardless of function) to stop a shade that is in motion.<br />
• Receives up to two contact closure inputs via a connector on the back<br />
of the Wallstation.<br />
• Contact closure features:<br />
- When the left keypad is programmed as scene or zone toggle, or<br />
shade control, input 1 closure will perform the top button action, and<br />
input 2 closure will perform the bottom button action.<br />
- When left keypad is programmed as a partition control, input 1 controls<br />
the partition programmed to the top button (closure = close partition;<br />
opening = close partition) and input 2 controls the partition programmed<br />
to the bottom button (closure = open partition; opening = close partition).<br />
• Shade control features:<br />
- Used to control multiple groups of shades independently from a singlegang<br />
keypad (e.g., a window with a sheer shade and a blackout shade).<br />
- Can control Sivoia <strong>QS</strong> Window Treatments.<br />
- Also controls shades with wireless IR controllers SVQ-3PIT, SVQ-OCIT,<br />
SVQ-4GD-OCIT, and SVQ-4S2G-IT.<br />
- Pressing the Open (or Close) button once will cause the window<br />
treatments to move to their fully open (or closed) position. Tap any button<br />
(regardless of function) to stop a shade that is in motion.<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Available with button engraving that can be customized for lighting and/<br />
or shade applications on any model.<br />
• Three engraving options are available: General Engraving (EGN),<br />
Standard Engraving (E01), and Non-Standard Text Engraving (NST).<br />
For more details, please visit the GRAFIK Eye® <strong>QS</strong> website at<br />
www.lutron.com/grafikeyeqs<br />
• E01 engraving option allows control of three groups of shades. See<br />
page 3 for NST control options.<br />
SPECIFICATION SUBMITTAL<br />
Page
<strong>International</strong><br />
Wallstations<br />
Color and Engraving Codes<br />
<strong>QS</strong>WE-10BRLN-___-___<br />
<strong>QS</strong>WE-10BRLI-___-___<br />
10-Button Wallstation with<br />
Raise/Lower<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
Off<br />
<strong>QS</strong>WE-10BRLN-WH-EGN<br />
(Non-insert version)<br />
1<br />
2<br />
3<br />
4<br />
Off<br />
<strong>QS</strong>WE-10BRLI-WH-E01<br />
(Insert version)<br />
Open<br />
Preset 1<br />
Preset 2<br />
Preset 3<br />
Close<br />
LEDs<br />
Scene<br />
Selection<br />
Buttons<br />
Engraving<br />
Master Raise/Lower<br />
369273a 06.22.10<br />
Description<br />
• Often used to select and adjust scenes.<br />
• Large, rounded buttons are easy to use.<br />
• Backlit buttons with optional engraving make it easy to find and<br />
operate the Wallstation in low light conditions.<br />
• Optional button engraving is angled up to the eye for easy<br />
reading.<br />
• Master raise/lower brightens or dims all lighting or raises/lowers<br />
all assigned shades in the last selected scene or toggled group.<br />
• Functions as one column that can:<br />
- Control scenes 1–9, Off, or 1–10.<br />
- Each button will toggle a zone or a group of zones.<br />
- LEDs reflect door status of ten partitions.<br />
• If shade engraving is selected, control functions as two<br />
independent controllers. The left column controls scenes.The<br />
right column controls Sivoia® <strong>QS</strong> Window Treatments.<br />
• Receives up to two contact closure inputs via a connector on<br />
the back of the Wallstation.<br />
• Contact closure features:<br />
- When the left keypad is programmed as scene or zone toggle, or<br />
shade control, input 1 closure will perform the top button action,<br />
and input 2 closure will perform the bottom button action.<br />
- When left keypad is programmed as a partition control, input 1<br />
of the partition programmed to the top button (closure = open<br />
partition; opening = close partition) and input 2 controls the<br />
partition programmed to the bottom button (closure = open<br />
partition; opening = close partition).<br />
• Shade control features:<br />
- Can control Sivoia <strong>QS</strong> Window Treatments.<br />
- Pressing the Open (or Close) button once will cause the<br />
window treatments to move to their fully open (or closed)<br />
position. Tap any button (regardless of function) to stop a<br />
shade that is in motion.<br />
Finish and Engraving Options<br />
• Standard model wallstations are white and come unengraved.<br />
• Available with button engraving that can be customized for<br />
lighting and/or shade applications on any model.<br />
• Three engraving options are available: General Engraving (EGN),<br />
Standard Engraving (E01), and Non-Standard Text Engraving<br />
(NST). For more details, please visit the GRAFIK Eye® <strong>QS</strong><br />
website at www.lutron.com/grafikeyeqs<br />
• Functions as two independently programmable controllers when<br />
general engraving or no engraving are ordered. Left keypad<br />
function mimics a 5-button keypad and right keypad mimics a<br />
5-button keypad. See function details on page 5.<br />
• E01 engraving option allows control of one group of shades and<br />
one group of lights. See page 3 for NST control options.<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
369273a 06.22.10<br />
Specifications<br />
Power Input (Control Link Terminal 2)<br />
Low-voltage type PELV. Operating voltage: 24 V<br />
Key Design Features<br />
• Field-changeable button and faceplate assemblies allow easy<br />
customization.<br />
• Meets IEC 801-2. Tested to withstand 15 kV electro-static discharge<br />
without damage or memory loss.<br />
• Faceplate snaps on with no visible means of attachment.<br />
• Available as an “insert” style control for multi-ganging.<br />
• Use Faceplate Replacement Kits to change color, button configuration, or engraving.<br />
• Faceplate Replacement Kits may also be used to convert between<br />
non-insert and insert configurations.<br />
System Communications and Capacity<br />
• Low-voltage type PELV wiring connects Wallstations to other devices on the<br />
<strong>QS</strong> Link.<br />
• A <strong>QS</strong> system can have up to 100 devices and 100 zones; <strong>International</strong> seeTouch <strong>QS</strong><br />
counts as one device and no zones on the <strong>QS</strong> Link.<br />
Front View<br />
Side View<br />
Terminals<br />
Accept up to two 1.0 mm 2 (18 AWG) typical.<br />
Environment<br />
0 - 40 °C (32 - 104 °F). Relative humidity less than 90% non-condensing.<br />
Mounting<br />
Typical backbox dimensions: 75 mm (3 in) wide x 75 mm (3 in) tall x<br />
35 mm (1.4 in) deep.<br />
Back View<br />
4 3 2 1<br />
C B A<br />
<strong>QS</strong> Link<br />
Connector<br />
Sensor/<br />
Contact<br />
Closure<br />
Input<br />
Connector<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
How to Build a Standard <strong>International</strong> seeTouch <strong>QS</strong> Model Number<br />
<strong>QS</strong>WE- -WH<br />
Wallstations<br />
369273a 06.22.10<br />
Prefix<br />
Button<br />
Configuration<br />
(see next page)<br />
Insert<br />
Style<br />
White<br />
Matte<br />
Finish<br />
N: Non-insert<br />
I: Insert<br />
How to Build a Custom <strong>International</strong> seeTouch <strong>QS</strong> Model Number<br />
<strong>QS</strong>WE- - -<br />
Prefix<br />
Button<br />
Configuration<br />
(see next page)<br />
Insert<br />
Style<br />
Color/<br />
Finish<br />
Engraving<br />
Code<br />
N: Non-insert<br />
I: Insert<br />
Color/Finish Codes<br />
Satin Color Matte FinishesTM<br />
Available with Insert (I) style controls only.<br />
Argentum AR<br />
Mica<br />
MC<br />
Arctic white AW<br />
Architectural Metal Finishes<br />
With black plastic buttons (standard).<br />
Bright Brass BB<br />
Bright Chrome BC<br />
Bright Nickel BN<br />
Satin Brass SB<br />
Satin Chrome SC<br />
Satin Nickel SN<br />
Engraving Codes<br />
Omit: Unengraved<br />
EGN: General Engraving<br />
See page 1 button engraving for function<br />
E01: Standard Engraving<br />
See page 1 button engraving for shade<br />
function<br />
NST: Non-Standard Text Engraving<br />
Please visit the GRAFIK Eye® <strong>QS</strong> website<br />
at www.lutron.com/grafikeyeqs for<br />
custom engraving forms<br />
Special Metal Finishes<br />
Antique Brass QB<br />
Antique Bronze QZ<br />
Gold Plated AV<br />
*Note: Some Satin Colors units ship with<br />
different color buttons. For more information,<br />
please visit the seeTouch website at<br />
www.lutron.com/seetouch<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
How to Build an <strong>International</strong> seeTouch <strong>QS</strong> Model Number (continued)<br />
Wallstations<br />
369273a 06.22.10<br />
Button Configurations<br />
2B<br />
2-button<br />
3B<br />
3-button<br />
4B<br />
4-button<br />
5BRL<br />
5-button with raise/lower<br />
5BRLIR<br />
5-button with IR receiver<br />
and raise/lower<br />
6BRL<br />
6-button with raise/lower<br />
7BRL<br />
7-button with raise/lower<br />
8BRL<br />
8-button with raise/lower<br />
8BRLIR<br />
8-button with IR receiver<br />
and raise/lower<br />
10BRL<br />
10-button with raise/lower<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
369273a 06.22.10<br />
seeTouch® <strong>QS</strong> Wallstation Button Functions Summary<br />
Button Configuration 2B 3B 4B 5BRL<br />
5BRLIR<br />
6BRL<br />
7BRL<br />
8BRL<br />
8BRLIR<br />
10BRL<br />
Left<br />
Right<br />
Left<br />
Right<br />
Left Right<br />
Left Right<br />
EGN Functionality<br />
1, Off<br />
1, 2, Off<br />
1-3, Off<br />
1-4, Off<br />
See 3B WT<br />
See 2B WT<br />
See 3B WT<br />
1-9 Off<br />
E01 Functionality<br />
1-3, Off<br />
5-7, Off<br />
9-11, Off<br />
13-15, Off<br />
WT<br />
WT: 3 Groups<br />
WT: 2 Groups<br />
WT: 3 Groups<br />
See 5B<br />
WT<br />
NST Options<br />
Scene Options<br />
1, Off<br />
5, Off<br />
9, Off<br />
13, Off<br />
1, 2<br />
5, 6<br />
9, 10<br />
13, 14<br />
1, 2, Off<br />
5, 6, Off<br />
9, 10, Off<br />
13, 14, Off<br />
1-3<br />
5-7<br />
9-11<br />
13-15<br />
1, 3, Off<br />
5, 7, Off<br />
9, 11, Off<br />
13, 15, Off<br />
1-4<br />
5-8<br />
9-12<br />
13-16<br />
1-4, Off<br />
5-8, Off<br />
9-12, Off<br />
13-16, Off<br />
1-5<br />
5-9<br />
9-13<br />
See 3B See 3B See 2B See 5B<br />
See 3B See 5B<br />
1-9, Off<br />
1-10<br />
Zone<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
Partition Function<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
X<br />
2B Partition Function<br />
X<br />
X<br />
Zone Lockout Function<br />
X<br />
X<br />
Fine Tune Function<br />
X<br />
X<br />
Sequence Function<br />
X<br />
X<br />
Panic Function<br />
X<br />
X<br />
Window Treatments<br />
Function<br />
X<br />
X<br />
X<br />
X<br />
WT - Window Treatments<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
Wallstation <strong>Installation</strong><br />
369273a 06.22.10<br />
Control Station Device (CSD) Link<br />
Wiring<br />
• Use low-voltage PELV wiring to connect<br />
Wallstations to the <strong>QS</strong> link.<br />
• Make connections inside the wallbox or in<br />
a switch/junction box with a maximum wire<br />
length of 2.5 m (8 ft) from the link to the<br />
Wallstation.<br />
• Two 1.0 mm 2 (18 AWG) conductors<br />
for common (terminal 1) and 24 V<br />
(terminal 2). These will not fit in terminals.<br />
Connect as shown.<br />
• One shielded, twisted pair 1.0 mm 2<br />
(22 AWG) for data link (terminals 3 and 4).<br />
• Connect Drain/Shield as shown. Do not<br />
connect to Ground (Earth) or Wallstation.<br />
Connect the bare drain wires and cut off<br />
the outside shield.<br />
(2) 1.0 mm 2<br />
(18 AWG)<br />
(2) 1.0 mm 2<br />
(18 AWG)<br />
Wiring to Control Link<br />
PELV Control wiring<br />
(2) 1.0 mm 2 (18 AWG)<br />
1: Common<br />
2: 24 V<br />
4 3 2 1<br />
C B A<br />
Faceplate Information<br />
Faceplate Replacement Kits<br />
Use Faceplate Replacement Kits to change:<br />
colors, button configuration, engraving, between<br />
insert and non-insert versions. Each Kit includes<br />
an adapter, button assembly, and wallplate.<br />
Non-Insert Kit<br />
Data Link - (1) twisted, shielded pair<br />
1.0 mm 2 (22 AWG )<br />
3: MUX<br />
4: MUX<br />
Rear of <strong>International</strong><br />
seeTouch <strong>QS</strong> Wallstation<br />
Note: Use appropriate wire connecting<br />
devices as specified by local codes.<br />
Model Numbers for Kits<br />
Insert Kit<br />
<strong>QS</strong>WE-2BN <strong>QS</strong>WE-2BI<br />
<strong>QS</strong>WE-3BN <strong>QS</strong>WE-3BI<br />
<strong>QS</strong>WE-4BN <strong>QS</strong>WE-4BI<br />
<strong>QS</strong>WE-5BRLN <strong>QS</strong>WE-5BRLI<br />
<strong>QS</strong>WE-5BRLIRN <strong>QS</strong>WE-5BRLIRI<br />
<strong>QS</strong>WE-6BRLN <strong>QS</strong>WE-6BRLI<br />
<strong>QS</strong>WE-7BRLN <strong>QS</strong>WE-7BRLI<br />
<strong>QS</strong>WE-8BRLN <strong>QS</strong>WE-8BRLI<br />
<strong>QS</strong>WE-8BRLIRN <strong>QS</strong>WE-8BRLIRI<br />
<strong>QS</strong>WE-10BRLN <strong>QS</strong>WE-10BRLI<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number:
<strong>International</strong><br />
Wallstations<br />
369273a 06.22.10<br />
Contact Closure Inputs<br />
Specifications<br />
• Inputs must be dry contact closure or groundreferenced<br />
solid-state outputs:<br />
• Wallstation is miswire protected up to 36 V .<br />
• Outputs must stay in the closed or open<br />
states for at least 40 msec in order to be recognized by<br />
the Wallstation.<br />
• To ensure compatibility with wired occupancy sensors,<br />
only use sensors with the Relay model option – those<br />
with model numbers ending with R<br />
(LOS-CDT-xxxxR or LOS-WDT-R).<br />
Contact Closure Input Wiring<br />
• Use low-voltage PELV wiring to connect the contact<br />
closure inputs to the Wallstation.<br />
4 3 2 1<br />
C B A<br />
(3) 1.0 mm 2<br />
(18 AWG)<br />
C: Common<br />
B: Input 2<br />
A: Input 1<br />
Rear of <strong>International</strong><br />
seeTouch <strong>QS</strong> Wallstation<br />
Job Name:<br />
SPECIFICATION SUBMITTAL<br />
Model Numbers:<br />
Page<br />
Job Number: