Door Catalogue for BECKER Sectional Door Drives - Becker-Antriebe

10. BECKER door control
for tubular drives: Beck-O-Tronic 4
Application: For operation of garage roller doors and small industrial
roller doors in conjunction with BECKER tubular drives. Starting with
the entry-level version, the modular BECKER Beck-O-Tronic 4 door
control system can gradually be equipped with a wide range of extras,
Illustration Designation/Item No. Type Function
Door Control
BOT 4
e.g. a plug-in radio receiver or an evaluator for the bottom safety-edge
rail system. The door can be opened from a distance by radio command
and, in conjunction with a 24 V light barrier, it closes automatically
once the barrier is interrupted and remade
BOT 4 - basic version Surface-mounted • Membrane keyboard with UP-STOP-DOWN
4005 000 027 0 Class of protection: IP 54 button (installation mode incl.)
Without radio, without Plastic housing • Aux voltage output 24 V DC/100 mA
switching rail evaluator Dimensions (W x H x D): for light barriers
155 x 130 x 50 mm • Automatic circuit interruption in the end limits on drives
with mechanical or electronic limit switching
1 x 230 V – 50 Hz • Four LED’s display operating status and
error messages
Single phase • Yard light or alarm light connectable
• Internal radio antenna
Control voltage: • Evaluation of a 1- or 4-channel radio signal
24 V / DC (1-channel: UP, STOP, DOWN, STOP,... or
4-channel: defined commands)
Connections for:
• External pulse switch
• Connection for EMERGENCY STOP and fall arrester
• 24 V light barrier
Retrofittable:
• Plug-in evaluator for pneumatic, electrical or
optical switching rail (Fraba)
• Terminal resistance can be switched
between 1.2 k� and 8.2 k�
• Automatic reclosing feature
• Radio receiver module
for 1- and 4-channel operation can be mounted
BOT 4 version for As above As above, but with evaluator for pneumatic,
self-locking electrical or optical switching rail (Fraba),
4005 000 042 0 terminal resistance can be switched between
without radio, 1.2 k� and 8.2 k�
with switching rail evaluator
BOT 4 full version As above As above, but with radio receiver, 1-channel
4005 000 037 0 maxi hand transmitter and evaluator for pneumatic,
With radio receiver, electrical or optical switching rail (Fraba),
1-channel maxi hand transmitter, terminal resistance can be switched between 1.2 k�
and 8.2 k�
Further versions are available on request!
Door Control Catalogue, Page 15