20.01.2015 Views

Boiler Master

Boiler Master

Boiler Master

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

WITHOUT BOILERMASTER<br />

WITH BOILERMASTER<br />

21% Savings *<br />

With the <strong>Boiler</strong> <strong>Master</strong> you get the best heat by optimizing the burning fire sequences<br />

and duration. Installation is easily done in about an hour. <strong>Boiler</strong> <strong>Master</strong> is a<br />

product that saves energy and helps our environment by reducing CO2.<br />

<strong>Boiler</strong> <strong>Master</strong> has been tested and certified by the most recognized<br />

testing institution in England. Over 10,000 units have already<br />

been installed in Europe<br />

<br />

<br />

<strong>Boiler</strong><strong>Master</strong>®<br />

AN ELECTRONIC “MECHANIC”<br />

An electronic “mechanic” that never rests. Saves up to 30% of your<br />

oil or gas costs!<br />

This unique patented invention supervises the furnace and reduces<br />

continuously the burning so that optimal operation will be received<br />

all the time. This happens because the unit concentrates on the burner<br />

instead of the furnace- or the radiators water temperatures.<br />

Compare with the modern car engine, that works with micro process<br />

steering and therefore substantially reduces the fuel consumption.<br />

The unit reduces the need for fuel up to 30% by optimizing the frequency<br />

of the burning time.<br />

<br />

<br />

<br />

burner<br />

<br />

<br />

<br />

savings equipment


The <strong>Boiler</strong> <strong>Master</strong> measures Time, Load<br />

and Controls the water temperature.<br />

These measurements are used in a simple and intelligent way to<br />

calculate the optimum burning cycles at all times. This formula is<br />

the basis for the <strong>Boiler</strong> <strong>Master</strong> patent.<br />

The <strong>Boiler</strong> <strong>Master</strong> continuously monitors cooling and burning<br />

times. The length of the cooling period is changed depending on<br />

current load. Optimum burning cycles are achieved with longer<br />

cooling periods but more importantly a shorter total burning<br />

time ( e.g. per 24 hour period) – without affecting the heating or<br />

hot water requirements.<br />

What it does / How it works!<br />

Measures the Time Difference<br />

<strong>Boiler</strong> <strong>Master</strong> works with the boilers thermostat and measures<br />

the time it takes for the water temperature to fall from a high to<br />

a low level. (from + 176F down to +167F).<br />

Processes the Information<br />

The <strong>Boiler</strong> <strong>Master</strong> processes the information and changes the<br />

cooling period depending on:<br />

Time ( from high to low level water temp)<br />

Economy factor ( the % increase in the cooling period)<br />

Continuous adjustments<br />

The time is continuously adjusted in accordance with current<br />

heat requirements (load) Time - gets longer during the warm<br />

season (low load) and shorter during the colder season or if heat<br />

requirements suddenly increases - more hot water required<br />

(high load).<br />

The benefits are:<br />

We get a larger share of burning time during best<br />

conditions<br />

Each time the burner re-starts it takes about 60 – 90 seconds<br />

before burning conditions are ideal. With <strong>Boiler</strong> <strong>Master</strong> we have a<br />

greater share of burning time ( longer interconnected burning<br />

times) during ideal burning conditions and thereby higher<br />

average burning efficiency, i.e. better utilization of the fuel<br />

energy.<br />

Unnecessary re-starts<br />

For certain “ smaller” hot water requirements, the thermostat<br />

reacts and re-starts the burner for a short period, despite the fact<br />

that the heat was not really required. After a short while, the<br />

burner stops again. With <strong>Boiler</strong> <strong>Master</strong> these unnecessary<br />

re-starts are avoided.<br />

A sensor monitors the return hot water temperature – if this<br />

temperature drops to below a pre-set level (e.g.+ 140F) a signal is<br />

sent to the microprocessor to re-start the burner immediately.<br />

Fewer ignitions, reduced starting losses, etc.<br />

With <strong>Boiler</strong> <strong>Master</strong> the number of re-starts is significantly<br />

reduced. By having fewer re-starts, start up losses as well as soot<br />

formation is reduced. 1 millimetre of soot increases fuel<br />

consumption by 4 to 5 percent.<br />

Better use of stored energy<br />

When <strong>Boiler</strong> <strong>Master</strong> extends the cooling periods, a certain<br />

temperature reduction occurs in the boiler (often 36F to 41F) as<br />

we are utilising more of the boilers stored energy. There is a large<br />

amount of energy in the boiler and the system which can be<br />

used more efficiently.<br />

Better environment<br />

Improved burning efficiency gives less discharge into the<br />

atmosphere and creates a better environment, which is<br />

eco-friendly!<br />

Less wear and tear.<br />

Because there are fewer re-starts the wear and tear on the burner<br />

is reduced which in turn increases the life expectancy of the<br />

equipment.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!