ZF S5-325 service manual - The Car Nut
ZF S5-325 service manual - The Car Nut
ZF S5-325 service manual - The Car Nut
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
- 8 -<br />
Fig. 9.<br />
Fig. 10.<br />
3. Removal of layshaft and reverse<br />
With a soft drift drive the layshaft towards the rear until roller<br />
bearing (304) on input aide is free of the housing. Remove inner<br />
ring of roller bearing (304) with main tool .7. and adaptor set<br />
.15. (Fig. 9). Take the layshaft, with the large gear wheel first,<br />
out of the gearbox housing (Fig. 10). Remove front roller bearing<br />
(307) from the shaft, using main tool .7. and adaptor set .16.<br />
(Fig. 11). Release circlip (306). Withdraw reverse shaft (503)<br />
with tool .18. and remove reverse gear (501) and thrust washer<br />
(502).<br />
Fig, 11.<br />
Fig. 12.<br />
4. Dismantling the main shaft<br />
Clamp main shaft at splined section vertical in a vice with soft
Change language