2010 Haas VMC Brochure - Haas Automation, Inc.

CHIP AND COOLANT MANAGEMENT
Single Auger All Haas VMCs are available with a single, augerstyle
chip conveyor that automatically removes chips from the machine,
while simultaneously compressing them and extracting the coolant. For
added reliability, the system reverses automatically if a jam occurs.
Triple Auger VF-1 and VF-2 machines (all models) are available
with a high-volume chip-removal system comprising dual side augers
to transport chips to the front of the pan, and a primary chip auger to
discharge the chips from the machine.
Quad Auger VF-3 through VF-6 machines (all models) are
available with a high-volume chip-removal system comprising four side
augers to transport chips to the front of the pan, and a belt-type chip
conveyor to discharge chips from the machine at barrel height. The belt
conveyor may be installed on either side of the machine.
Chip Removal Systems People buy CNC machines to make parts
faster. The last thing they want is to waste time removing chips. Haas VMCs are available
with an optional single- or multi-auger system that automatically removes chips from the
enclosure and conveniently discharges them at the side of the machine.
24 | America’s Leading Machine Tool Builder
Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 25