2010 Haas VMC Brochure - Haas Automation, Inc.

HIGH-PERFORMANCE DRILL/TAP
HIGH PERFORMANCE
The DT-1 is a compact, high-speed drill and tap machine with full milling capabilities. The machine
has a 20" x 16" x 15.5" (xyz) work cube and a 26" x 15" T-slot table. A powerful BT30 taper inline directdrive
spindle provides 12,000 rpm, and allows rigid tapping at speeds to 5000 rpm. A high-speed sidemount
tool changer swaps tools quickly, while 2400 ipm rapids and accelerations to 1G combine to shorten
cycle times and reduce non-cutting time.
Steeply sloped internal sheet metal and available
dual chip augers efficiently move chips to the rear
of the DT-1 for discharge.
VF-SS Super-Speed VMCs – Affordable
High-Speed Performance The Haas SS Series high-performance vertical machining
centers come standard with an innovative 12,000-rpm, inline direct-drive spindle, a high-speed side-mount tool
changer and high-speed rapids for reduced cycle times.
The all-around enhanced performance of the Super-Speed machines yields shorter cycle times and more parts
per shift, making them some of the more popular innovations offered by Haas Automation.
The DT-1’s high-speed 20+1 tool side-mount
tool changer swaps tools in 0.8 seconds. The
12,000-rpm inline direct-drive spindle allows
rigid tapping to 5000 rpm, with up to 4-times
retract speed.
Available Models
VF-2SS
VF-2SSYT
VF-3SS
VF-3SSYT
VF-4SS
VF-5SS
VF-6SS
The user-friendly Haas control and available
Intuitive Programming System make the DT-1
easy to program and operate.
34 | America’s Leading Machine Tool Builder
Haas Automation, Inc. 800-331-6746 www.HaasCNC.com | 35