Pressure reducing valves REDUFIX - Watts Industries
Pressure reducing valves REDUFIX - Watts Industries
Pressure reducing valves REDUFIX - Watts Industries
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Pressure</strong> <strong>reducing</strong> <strong>valves</strong><br />
<strong>REDUFIX</strong><br />
• Compact, preset adjustable pressure <strong>reducing</strong> valve.<br />
• Outlet pressure setting range : 1,5 to 5 bar.<br />
• Corrosion preventing DZR brass body.<br />
• Female 1/4” pressure gauge connection.<br />
• Maintenance free.<br />
• Ideal for protecting electric water storage heaters and household appliances.
PRESSURE REDUCING VALVE • <strong>REDUFIX</strong><br />
Use :<br />
<strong>REDUFIX</strong> is an ideal pressure <strong>reducing</strong> valve for sanitary water systems.<br />
<strong>REDUFIX</strong> is designed for protecting single appliance like water storage heaters<br />
and household appliances.<br />
It is directly fitted upstream of the appliance that you want to protect or to water<br />
circuit inlets that you want to protect (kitchen, bathrooms, garden piping etc.).<br />
Approvals :<br />
Wras (UK), ACS (F).<br />
Advantages :<br />
• Compact<br />
Takes up less space, easier to fit, It is at present the<br />
more unobtrusive underneath water heaters.<br />
• Ready to install<br />
Factory preset,<br />
You can change the setting from 1,5 to 5 bar.<br />
• Any position<br />
The <strong>REDUFIX</strong> can be fitted in any position.<br />
• Robust<br />
Once fitted you can forget it. The <strong>REDUFIX</strong> does not<br />
require any special maintenance.<br />
• Silent<br />
The valve system design and types of seals used<br />
ensure operation with no vibration and no banging<br />
about.<br />
• Specific discharge<br />
Discharge is appropriate to isolated appliances like<br />
washing machines or water heaters. It has a part in<br />
better thermostatic mixer control and controlled water<br />
consumption.<br />
• Practical<br />
Its Female 1/4” pressure gauge outlet is located on<br />
the front and not under the valve.<br />
• Tried and tested reliability<br />
On the market for over 20 years, the <strong>REDUFIX</strong> is<br />
made at Fressenneville in France in our production<br />
unit ISO 9001 certified by BVQI.<br />
Why 3 bar presetting <br />
Because all features introduced by valve manufacturers<br />
are measured to 3 bar*.<br />
Too high a pressure over 3 bar would result in<br />
accelerating water velocity in pipes with the risk<br />
of:<br />
• Creating water hammer,<br />
• Washing off the grease on ceramic inserts making<br />
head and lever movement harder,<br />
• Causing water in electric water heaters to expand too<br />
quickly causing the valve of the safety valve unit to<br />
open prematurely leading to significant water<br />
consumption.<br />
So the <strong>REDUFIX</strong> is factory preset at 3 bar.<br />
This safety guarantee has made <strong>REDUFIX</strong> a market<br />
success for over 20 years.<br />
* recommandation of French Association of Pumps and<br />
Taps <strong>Industries</strong><br />
• Loosening limestone deposits in pipes causing ceramic<br />
inserts to break when taps are fitted with them,<br />
Range <strong>REDUFIX</strong> Presentation Finish Code ref.<br />
F/F 1/2” (15x21) single box nickel plated 82000<br />
M/F union nut 3/4” (20x27) single box nickel plated 82210<br />
M/F union nut 3/4” (20x27) under hull nickel plated 82211<br />
F union nut/M 3/4” (20x27) single box nickel plated 82215<br />
M/M 3/4” (20x27) single box nickel plated 82110<br />
M/M 3/4” (20x27) and F/F 1/2” (15x21) single box nickel plated 82007<br />
Compression fitting DN 15 for copper pipe single box nickel plated 82114<br />
Compression fitting DN 22 for copper pipe single box nickel plated 82115
PRESSURE REDUCING VALVE • <strong>REDUFIX</strong><br />
Technical specifications :<br />
• <strong>Pressure</strong> <strong>reducing</strong> valve with cloth diaphragm, can be set from 1,5 to 5 bar.<br />
• Corrosion preventing DZR brass body.<br />
• Seals and diaphragm NBR.<br />
• Slotted adjusting screw that can be turned with a flathead screwdriver.<br />
• Factory preset (4 bar at zero discharge for 3 bar working).<br />
• Female 1/4” pressure gauge outlet.<br />
• Maintenance free robust appliance.<br />
• Ideal for protecting electric water storage heaters and household appliances (washing machine, dischwasher,<br />
...).<br />
• 15 bar max inlet pressure.<br />
Materials :<br />
description<br />
Body<br />
Finish<br />
Spring<br />
Piston<br />
Diaphragm and seals<br />
Head<br />
Cap<br />
Plug for gauge connection<br />
material<br />
brass DZR CW602N<br />
nickel plated<br />
stainless steel<br />
PSU (polysulfone polymer)<br />
NBR<br />
brass CW617N<br />
brass CW617N<br />
P.A.<br />
Recommendations / installation :<br />
- Rinse the upstream pipes carefully to remove oakum, teflon, weld spatter, grit etc., before fitting the <strong>REDUFIX</strong>.<br />
- Fit the <strong>REDUFIX</strong> to the inlet of the water circuit that you want to protect (kitchen, bathrooms, garden piping etc.).<br />
- The setting can be adjusted between 1,5 and 5 bar.<br />
Screw or unscrew the setting screw on the top of the appliance with a screwdriver to raise or lower this setting.<br />
After opening then closing a valve on the downstream circuit, check the pressure on the pressure gauge.<br />
- You do not have to comply with any special position.<br />
- The <strong>REDUFIX</strong> technical specifications do not change whichever operating plan is used.<br />
- The hexagonal plug opposite the head can be taken off for blowing down or draining.<br />
The <strong>REDUFIX</strong> requires no special maintenance, nonetheless we recommend that it is fitted in an accessible place.<br />
Dimensions & weight :<br />
ref. : 82000<br />
F/F 1/2”<br />
ref. : 82210<br />
M/F union nut 3/4”<br />
ref. : 82215<br />
F union nut/M 3/4”<br />
ref. : 82110<br />
M/M 3/4”<br />
± 0,31 kg ± 0,36 kg ± 0,36 kg ± 0,32 kg<br />
78<br />
78<br />
1/2” 1/2”<br />
78<br />
G3/4”<br />
G3/4”<br />
G3/4”<br />
G3/4”<br />
3/4” 3/4”<br />
78<br />
60<br />
75,5<br />
67 67<br />
75,5<br />
65<br />
ref. : 82007<br />
double threaded M3/4” F1/2”-<br />
M3/4” F1/2”<br />
ref. : 82114<br />
compression fitting 15mm<br />
ref. : 82115<br />
compression fitting 22mm<br />
± 0,32 kg ± 0,34 kg ± 0,38 kg<br />
78<br />
1/2” 1/2”<br />
3/4” 3/4”<br />
65
PRESSURE REDUCING VALVE • <strong>REDUFIX</strong><br />
Flow characteristics :<br />
<strong>Pressure</strong> drop diagram<br />
Range of use :<br />
• Sanitary cold water.<br />
• Hot water up to 70°C.<br />
• 15 bar max inlet pressure.<br />
• 3 bar (± 0,5) setting pressure<br />
(adjustable from 1,5 to 5 bar).<br />
Under the following conditions : 8 bar inlet<br />
3 bar outlet<br />
Typical installations :<br />
Electrical hot water tank<br />
wall mounting<br />
Electrical hot water<br />
storage heater<br />
Dielectric insulating connection<br />
Thermostatic<br />
Mixing <strong>valves</strong> MMV-C<br />
Mixed water<br />
Hot water<br />
Cold water inlet<br />
Cold water inlet<br />
<strong>Pressure</strong> <strong>reducing</strong> valve<br />
<strong>REDUFIX</strong><br />
Safety Unit<br />
SFR 3/4"<br />
Deflector<br />
Trap funnel kit<br />
Drainage<br />
The 82210 model is specially designed for use with the SFR<br />
hydraulic safety groups for hot water storage heaters.<br />
The 3/4” union nut outlet is used for an easy direct connection<br />
to the SFR hydraulic safety groups threaded in Male 3/4”.<br />
Electrical hot water tank small capacity<br />
Electrical hot water tank small capacity<br />
Thermostatic<br />
Mixing valve<br />
MMV-C<br />
Mixed water<br />
Safety unit<br />
GSE 3000<br />
Hot water<br />
Domestic sanitary cold water application<br />
Hand wash basin<br />
Waching machine<br />
Cold water inlet with<br />
pressure reducer<br />
Air gap<br />
outlet 22 mm<br />
Dielectric<br />
union<br />
R.I.D.<br />
Hot water heater<br />
<strong>REDUFIX</strong><br />
Cold water inlet<br />
The photographs, illustrations and descriptions contained in this brochure are given for information only.<br />
<strong>Watts</strong> <strong>Industries</strong> reserves the right to change the technical specifications or the design of these products without prior notice.<br />
WATTS INDUSTRIES France<br />
06, avenue Gustave Eiffel - B.P. 40339<br />
28006 CHARTRES Cedex (France)<br />
Tel. +33 (0)2 37 25 11 00 - Fax +33 (0)2 37 25 11 11<br />
E-mail info@wattsindustries.fr<br />
Site www.wattsindustries.com<br />
Re-order no. 55(2)-UK-07/07