Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The Cobra TM<br />
Cobra Concrete<br />
Engraving Blades<br />
Item Model # Price<br />
4.5” x .090” BL-45090P $129.95 Made in USA<br />
4.5” x .125” BL-45125P $139.95 Made in USA<br />
4.5” x .250” BL-45250P $199.95 Made in USA<br />
4.5” x .375” BL-45375P $269.95 Made in USA<br />
Note: To prevent a thin core blade from spinning between the hub nuts,<br />
reverse the outside nut so the raised flanges do not bottom out.<br />
Non-Marking Wheel Kit<br />
Specifically designed for cutting<br />
overlayments, micro-toppings and<br />
other surfaces which tend to mark<br />
easily. Sealed bearings. Set of 4.<br />
Model # MG-513 $195.95<br />
Dynamic-Directional Wheels<br />
Dynamic wheels allow the machine<br />
to move freely in any direction. Used<br />
with linear tracking system and when<br />
attached to a center pivot. Kit includes<br />
(8) wheels, (4) axles and hex wrench.<br />
Compatible with Mongoose 411, Mongoose<br />
Air and Cobra.<br />
Model #SC-182 $219.95 $189.95<br />
Narrow Wheel Kit<br />
Used for track free engraving of free form curves<br />
and shapes or for cutting small radius circles and<br />
arcs when attached to a center pivot. Kit includes<br />
(4) wheels, (4) axles and hex wrench.<br />
Compatible with Mongoose 411, Mongoose Air<br />
and Cobra.<br />
Model #ME-349 $129.95 $99.95<br />
14<br />
Approximate Cut Width<br />
Approximate Cut Width<br />
Approximate Cut Width<br />
Approximate Cut Width<br />
Primary Connecting Bar Assembly<br />
Attaches the Super Compact to the tracking<br />
systems. Includes Clamp Block, Stabilizer Assembly,<br />
Star Knob, 9/64” T-Handle, 4” and 8” Spacer<br />
Model #SC-155 $557.95 $495.00<br />
4” Spacer for Primary Connecting Bar- #SC-146- $4.95<br />
8” Spacer for Primary Connecting Bar - #SC-145- $4.95<br />
Standard Aluminum<br />
Connecting Bar<br />
28” long with indexing holes drilled on 4” centers,<br />
includes splice insert and screws.<br />
Model #SC-108 $149.95 $99.95 (each)<br />
Connecting Bar Screws<br />
Special under cut heads 1/4-20 UC. Used<br />
to attach connecting bars together. These<br />
screws are NOT standard screws. Use<br />
of any other type of screw will result in a<br />
loose fit between the bars. Bag of 50.<br />
Model #SC-109<br />
Center Pivot<br />
Use two or more center pivots to weave circular<br />
brick patterns together. Machined from solid<br />
aluminum. Complete with indexing pin, star knob,<br />
and smooth rotating ball bearing.<br />
Model #SC-103 $208.95 $199.95<br />
“Stand On” Base<br />
Cut circles without anchoring the center pivot to the concrete. Machined<br />
out of rigid, non-marring plastic with<br />
crosshair sighting slots. Simply stand on<br />
the base to weigh down the center pivot.<br />
Center Pivot sold separately.<br />
Model #SC-175 $189.95 $149.95<br />
Connecting Bar Support Wheel<br />
Helps prevent connecting bar sag. Recommended<br />
when extending the connecting bar beyond 16<br />
feet .<br />
Model # SC-110 $103.95 $69.95<br />
<strong>Engrave</strong>-A-<strong>Crete</strong>.com • 1-800-884-2114