13.11.2012 Views

NEW - Engrave-A-Crete

NEW - Engrave-A-Crete

NEW - Engrave-A-Crete

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Cleaning and Surface Preparation<br />

Pressure Washer<br />

13 HP Honda Engine, General Pump, 4000 PSI, 4.0<br />

GPM with stainless steel frame and wand assembly.<br />

50 foot non-marking hose with couplers. Direct<br />

drive. Pull start. Includes wand, tips and chemical<br />

injector.<br />

Model #: ME-316 $1,695.95<br />

Pressure Washing Deck<br />

Use this washing deck to quickly clean flat surfaces evenly<br />

and easily. Clean large areas consistently and in half the<br />

time. Will not leave any pesky wand marks behind. 20”<br />

diameter with nylon brush skirt.<br />

Model #: ME-382 $1,195.95<br />

Pressure Washer Valve Kit<br />

Change attachments without having to shut<br />

down your pressure washer. Simply shut off the<br />

water flow at the hose end. Includes male and<br />

female quick couplers.<br />

Model #: ME-317 $89.95<br />

Floor Machine (11 AMP, 175 RPM, 110V)<br />

• A motor canopy bracket allows the operator to add up to six 9 pound<br />

weights directly above the center of the motor for increased friction<br />

without compromising balance.<br />

• Powder coated aluminum chassis is chip-resistant<br />

and corrosion resistant.<br />

• Dual deadman switch system stops motor with<br />

release of trigger for operator protection.<br />

• Continuous water feed hook-up with valve<br />

conveniently located on handle.<br />

• Non-marring bumpers on chassis and motor<br />

canopy.<br />

• Includes Pad Driver<br />

Model #: ME-371 $2,295.95<br />

Cleaning Staining and Surface Supplies<br />

Prep<br />

Nylon Bristle Brush with Riser - Used<br />

for removing residue after RAC staining<br />

an interior floor, or for interior cleaning<br />

after engraving is finished.<br />

Model #ME-373 $189.95<br />

17” Black Pad - Best pad for scrubbing an<br />

interior floor prior to staining.<br />

Model #ME-374 (Case of 5) $31.95 $29.95<br />

Sanding Screen - 17” 100 grit sanding screen, 10 per box.<br />

Use on interior floors to remove the shiny hard troweled<br />

top surface to open the floor up so it will accept<br />

stain. More aggressive than a black pad and designed<br />

for use with water. These sanding screens<br />

will cut faster and last longer then conventional<br />

black (wood) sanding screens. (Use a black pad on<br />

a floor machine as a driver.).<br />

Model #ME-391 (Case of 10) $159.95 $149.95<br />

17” Coatings Removal Pad - 36 Grit - This very stiff pad is<br />

impregnated with abrasive grit to cut off<br />

sealers, paints and concrete. For quickest<br />

coating removal use plenty of water and add<br />

weight to your floor machine<br />

Model #ME-368 (Single Pad) $79.95<br />

Model #ME-381 (Case of 5) $349.95<br />

Pad Driver - Used for gripping<br />

(attaching) pads to a floor<br />

machine.<br />

Model #ME-372 $139.95<br />

Natural Rubber Vacuum Squeegee<br />

New vacuum squeegee nozzle attachment comes with two piece chrome steel<br />

wand, removable squeegee head and replaceable natural rubber fins that<br />

won’t mark up your concrete. Separates into 3 pieces for easy storage. Fits<br />

standard 2” wet/dry vacuum hoses.<br />

Model # ME-365 $124.95 $99.95<br />

Replacement Rubber Fin Model #: ME-364 $11.95<br />

<strong>Engrave</strong>-A-<strong>Crete</strong>.com • 1-800-884-2114 37

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!