HOBIE ICAT - Hobie Cat
HOBIE ICAT - Hobie Cat
HOBIE ICAT - Hobie Cat
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ref : MM_<strong>ICAT</strong> Issued by : AR Date : 05/2010 Up-date : 0 Page : 19/<br />
<strong>HOBIE</strong> <strong>ICAT</strong><br />
ASSEMBLY MANUAL<br />
Preparation of the mast : Spreader bars<br />
Place the mast onto supports (trestles) if possible at about 80 cm from the ground, so as not to strain your back while<br />
rigging the mast, leaving enough room to go all the way around the mast.<br />
Illustration Steps Description<br />
1<br />
Take the spreader bar kit + the screw driver +<br />
adhesive tape.<br />
2<br />
Find the aluminium spreader bar fittings on the<br />
mast.<br />
3<br />
Insert the end of the fixed part of the spreader bar<br />
in the back mast fitting and insert the screw.<br />
4<br />
Put the bolt on and tighten with the spanner<br />
Copyright HCE 2010 - www.hobie-cat.net .../...