Single 16-way L-band Combiner with DC & 10MHz ... - ETL Systems
Single 16-way L-band Combiner with DC & 10MHz ... - ETL Systems
Single 16-way L-band Combiner with DC & 10MHz ... - ETL Systems
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
V1 E & OE<br />
RESILIENCE FLEXIBILITY RF PERFORMANCE<br />
<strong>Single</strong> <strong>16</strong>-<strong>way</strong> L-<strong>band</strong><br />
<strong>Combiner</strong> <strong>with</strong> <strong>DC</strong> &<br />
<strong>10MHz</strong> Pass<br />
This single <strong>16</strong>-<strong>way</strong> L-<strong>band</strong> active combiner is housed in a 2U<br />
shelf, covering the full range of L-<strong>band</strong> frequency 850-2150MHz<br />
and provides <strong>DC</strong> and <strong>10MHz</strong> pass from port 1 to the common port.<br />
Front & Rear view of a <strong>16</strong>-<strong>way</strong> L-<strong>band</strong><br />
<strong>Combiner</strong> <strong>with</strong> <strong>DC</strong> & 10Mhz Pass<br />
The unit is fitted <strong>with</strong> dual redundant power supplies which are<br />
monitored by LED’s on the front panel and via a dry contact alarm<br />
port on the rear.<br />
This model has 50 ohm N-type connectors but a range of connector<br />
types and impedances are available (model numbers will vary).<br />
<strong>ETL</strong> Model Number – C<strong>16</strong>01S2ULA-22258-N5N5
Technical Specifications<br />
• RF Parameters<br />
Capacity<br />
Frequency Range<br />
Gain<br />
<strong>16</strong>-<strong>way</strong><br />
850-2150MHz<br />
1.5 dB ± 1 dB<br />
• Physical<br />
Flatness<br />
Full <strong>band</strong><br />
±1.5 dB<br />
Over any 36MHz<br />
±0.35 dB<br />
1 dB Compression 10 dBm<br />
Noise Figure<br />
22 dB<br />
Connectors<br />
Impedance<br />
Dimensions<br />
N-type (other<br />
connectors available)<br />
50Ω<br />
2U high x 350mm<br />
deep x 19” wide<br />
Input Return Loss<br />
Output Return Loss<br />
<strong>10MHz</strong> Pass<br />
<strong>DC</strong> Pass<br />
>12 dB typical<br />
>12 dB typical<br />
Port1 to the common<br />
port only<br />
Port1 to the common<br />
port only. All other<br />
ports <strong>DC</strong> blocked<br />
Weight<br />
Colour<br />
• Power<br />
AC Power<br />
LNB Power<br />
8 kgs<br />
White 00-E-55 semigloss,<br />
front panel<br />
85-264Vac 50/60Hz<br />
None<br />
• System Control<br />
PSU<br />
Dual<br />
Display<br />
Front panel LED’s<br />
PSU Redundancy<br />
Yes<br />
• Environmental<br />
Operating temperature 0 to 45°C<br />
Location<br />
Indoor use only<br />
Storage Temperature -20°C to +75°C<br />
Humidity<br />
85% Non-condensing<br />
• Key Features<br />
<strong>DC</strong> Pass from input port 1 to the common port<br />
<strong>10MHz</strong> Pass from input port 1 to the common port<br />
LED’s to monitor PSU status<br />
<strong>ETL</strong> <strong>Systems</strong> develop, design and manufacture specialist<br />
equipment for satellite ground stations. For a fuller<br />
description of the <strong>ETL</strong> product range, please visit our<br />
website. This range can be used as the basis to meet your<br />
specific demands.<br />
Pb<br />
For additional information or details, please contact us at:<br />
<strong>ETL</strong> <strong>Systems</strong> Limited, Coldwell Radio Station, Madley, Hereford, England HR2 9NE<br />
T +44 (0)1981 259020 F +44 (0)1981 259021 E info@etlsystems.com www.etlsystems.com<br />
<strong>ETL</strong> Model Number – C<strong>16</strong>01S2ULA-22258-N5N5
Change language