Download datasheet - ETL Systems
Download datasheet - ETL Systems
Download datasheet - ETL Systems
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DIV16L1A-2323<br />
16-way L-band Active<br />
Splitter<br />
DIV16L1A-2323 is a 16-way active L-band splitter with unity<br />
gain and LNB bias. It requires 8-18V external DC bias.<br />
This component is available with the following RF connector<br />
options: 50 Ω SMA, N-type, BNC and 75 Ω BNC or F-type.<br />
Summary table for RF performance over L-band operation, 850 MHz to 2150 MHz<br />
Model<br />
Numbers<br />
RF<br />
ports<br />
Gain<br />
(dB)<br />
Gain<br />
Flatness<br />
(dB)<br />
Typ. Max<br />
1dB GCP*<br />
(dBm)<br />
Typ. Min<br />
NF (dB)<br />
Typ. Max<br />
Input<br />
Return Loss<br />
(dB)<br />
Typ. Min<br />
Output<br />
Return Loss<br />
(dB)<br />
Typ. Min<br />
DIV16L1A-2323-S5S5 50Ω SMA 0 ±1.0 ±1.0 ±1.5 0 -3 10 14 18 15 19 16<br />
DIV16L1A-2323-N5N5 50Ω N-type 0 ±1.0 ±1.0 ±1.5 0 -3 10 14 18 15 19 16<br />
DIV16L1A-2323-B5B5 50Ω BNC 0±1.0 ±1.3 ±1.8 0 -3 10 14 17 14 18 15<br />
DIV16L1A-2323-B7B7 75Ω BNC 0±1.5 ±1.5 ±2.0 0 -3 10 14 15 12 16 12<br />
DIV16L1A-2323-F7F7 75Ω F-type 0±2.0 ±1.5 ±2.0 0 -3 10 14 15 12 16 12<br />
*1dB Gain Compression Point (1dB GCP) is in relation to output power.<br />
Maximum current consumption is 200mA, typically 160mA.<br />
DC injection onto the common port is protected by 500mA polyfuse against accidental short circuits at the LNB port.<br />
Isolation: Isolation between any 2 output ports is typically 25dB .<br />
Isolation: Isolation (reverse gain) between the common port and any of the output ports is typically 35dB.<br />
Maximum acceptable operating parameters for reliable and safe operation<br />
Parameter Value Comment<br />
Input RF power 17dBm Max total RF power<br />
DC Voltage 30V Any RF port (35V max)<br />
Operating temperature 0 to 75°C Indoor use only<br />
Storage Temperature<br />
-20°C to +80°C<br />
Humidity 85% Non-condensing<br />
!<br />
Operation beyond these limits may cause instantaneous and permanent damage.<br />
RESILIENCE RELIABILITY RF PERFORMANCE CUSTOM BUILD<br />
V1.0 E&OE
DIV16L1A-2323<br />
16-way Active L-band Splitter<br />
Vector diagram & physical dimensions<br />
LNB Injection<br />
8-18V<br />
Port 1<br />
RF<br />
DC Block<br />
RF<br />
2323<br />
DC Block<br />
RF<br />
Port 16<br />
<strong>ETL</strong> <strong>Systems</strong> Ltd, Coldwell Radio Station, Madley, Hereford, HR2 9NE, England<br />
<strong>ETL</strong> <strong>Systems</strong> design, develop and manufacture specialist<br />
equipment for satellite ground stations. For a full<br />
description of the <strong>ETL</strong> product range, please see our<br />
website at www.etlsystems.com. This product range<br />
provides the basis for meeting your specific demands.<br />
RoHS Compliant<br />
Pb<br />
T el +44 (0)1981 259020<br />
Fax +44 (0)1981 259021<br />
info@etlsystems.com<br />
V1.0 E&OE
DIV16L1A-2323<br />
16-way Active L-band Splitter<br />
Alternative 16-way Active Splitters<br />
Model Number Gain Other Features<br />
DIV16L1A-2323 Unity gain LNB bias<br />
DIV16L1A-2329 Unity gain LNB bias and dual DC input pins<br />
DIV16L1A-2337 Unity gain DC pass on ONE port only<br />
DIV16L1A-2349 Unity gain DC block on ALL ports, integrated regulator<br />
DIV16L1A-2368<br />
DIV16L1A-2399<br />
DIV16F1A-2413<br />
DIV16B2A-2414<br />
Unity gain<br />
Unity Gain<br />
Unity gain / flat<br />
response<br />
Unity gain / flat<br />
response<br />
10MHz pass on port 1 only, DC pass on ALL ports, DC block<br />
between outputs<br />
DC and 10MHz pass between port one and the common port,<br />
and DC injection. DC is uni-directional<br />
Extended frequency range: 50 to 2800MHz & 10MHz pass<br />
Extended frequency range: 50 to 2150MHz & 10MHz pass<br />
DIV16H1A-2359 Unity gain IF-band (450-860MHz), DC block on ALL ports<br />
DIV16F3A-2361 Unity gain IF-band (20-200MHz), 10MHz pass and DC block on ALL ports<br />
Powering Options<br />
Fixed & Variable Voltage PSU’s.<br />
PSU12F125-9701<br />
PSU200V01-9700<br />
PSU range available<br />
Model Number Input Output Other<br />
PSU12F125-9701-SLP 100-240V (AC), 0.6A 12V (DC), 1.25A Solder pin output<br />
PSU200V01-9700-SLP 100-240V (AC), 0.6A 14V to 22V(DC) 1.25A Solder pin output<br />
<strong>ETL</strong> <strong>Systems</strong> Ltd, Coldwell Radio Station, Madley, Hereford, HR2 9NE, England<br />
<strong>ETL</strong> <strong>Systems</strong> design, develop and manufacture specialist<br />
equipment for satellite ground stations. For a full<br />
description of the <strong>ETL</strong> product range, please see our<br />
website at www.etlsystems.com. This product range<br />
provides the basis for meeting your specific demands.<br />
RoHS Compliant<br />
Pb<br />
T el +44 (0)1981 259020<br />
Fax +44 (0)1981 259021<br />
info@etlsystems.com<br />
V1.0 E&OE