Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool

Blacksmith 

Metalsmith 

Knifemaker 

Farrier 

www.piehtoolco.com 

888.743.4866 928.554.0700 

$7

Pieh Tool Company is 

located in Arizona’s pristine 

Yavapai County, just minutes 

from captivating Sedona. We 

are in a country that is rich with 

metalsmiths, sculptors, artists 

and horse enthusiasts! 

We stock a variety of hammers, equipment, vises, 

power tools, saws, anvils, forges, fluxes, finishes, 

tongs, horseshoes, feed, nails, rivets, lag bolts, 

videos & hundreds of book titles. We serve 

blacksmiths, knifemakers, jewelers, farriers, 

horseowners and hobbyists. 

The Pieh Legacy Collection 

be extremely satisfied! 

EDUCATION The "Bill Pieh Resource for Metalwork" offers educational opportunities to the metal 

working trades in the United States. Classes are held monthly. Reservations are required. 

SEMINARS Semi-annual demonstrations offer you an opportunity to learn from the masters in your craft. Be 

sure to visit the Calendar on our website for our schedule of events. 

CONVENIENCE Secure online shopping is available to you at www.piehtoolco.com. We ship worldwide. 

demonstrates our 

commitment to quality blacksmith tools. Be sure to check 

out the Billy tongs, the Bonnie and the Billy loop 

knives and other Pieh Tool products. We’re sure you will 

The following trademarks are owned by their respective companies; Pieh Tool Company, Pieh Legacy Collection, the Billy, the Bonnie; Radians: Radians AV; Rad Band, Thoro’Bred: Thoro’Bred, Queens Plate, Easy 

Care: Easy Boot Glove, Hoof Suspension; Equine Innovations: Hoofjack; Gene Ovnicek: Natural Balance; Milwaukee Electric: Milwaukee, Sawzall, Hackzall, Thunderbolt, M12, M18, Shockwave; Marxman, Marxman. 

Hours of Operation 

Monday-Friday: 8 am - 5 pm 

Saturday: 10 am - 3 pm 

Pieh Tool Company, Inc. 1-888-743-4866 

PIEH TOOL COMPANY, INC. 

661 E. Howards Rd. Suite J . Camp Verde, AZ 86322 USA 

DIRECTIONS 

Look for a tan and rust colored western style building on the south side of Hwy 260. We 

are located in the Zane Grey Complex. Parking is available in front of the building. 

Coming from the South (Phoenix or Prescott): 

I-17 North. Take exit #285, General Crook Trail ramp. Turn right. Go East (right) on Hwy 

260/General Crook Trail. Drive 1.8 miles on Hwy 260. Take 2nd right after over Verde 

River Bridge on Howards Road. (This is the frontage and access road to Hwy 260) 

Take an immediate left on Howards Road. Go 1/8 mi-we’re on the right. 

Coming from the North (Flagstaff): 

I-17 South. Take exit #287, Hwy-260/Cottonwood (AZ-89A) exit towards Payson. Travel 

East (left) on Hwy 260/General Crook Trail. Drive about 5 miles on Hwy 260. Take 2nd 

right after over Verde River Bridge on Howards Road. (This is the frontage and access 

road to Hwy 260) Take an immediate left on Howards Road. Drive 1/8 mi-we’re on the right. 

Coming from the West on Hwy 89A (Cottonwood/Sedona): 

Take 89A, cross over freeway and keep going East on Hwy 260/General Crook Trail. 

Drive about 5 miles on Hwy 260. Take 2nd right after over Verde River bridge on 

Howards Road. (This is the frontage and access road to Hwy 260) Take an immediate 

left on Howards Road. Drive 1/8 mi-we’re on the right. 

Coming from the East (Payson): 

Take Hwy 87/Hwy 260/General Crook Trail for 30 miles. Continue on Hwy 260/General 

Crook Trail . Turn left onto Parish Lane. Take an immediate left onto Howards Road. 

(Hwy 260 Frontage and Access Road) Drive about 1/4 mile down and we are on the left. 

We now offer refreshing drinks such as Coffee, Cafe 

Latte’ & Tea at our Cafe le’ Pieh. Enjoy a cup while 

browsing our selections or just relax on our porch. 

Free WIFI for your convenience while traveling!

TABLE OF CONTENTS 

Price List . . . . . . . . . . . . . . . . . . . . . . . 131-153 

Terms & Conditions . . . . . . . . . . . . . . . . . . . 154 

Order Forms . . . . . . . . . . . . . . . . . . . . . . . . 155 

Index . . . . . . . . . . . . . . . . . . . Inside Back Cover 

Abrasives, Rouges . . . . . . . . . . . . . . . . . . . . . 68 

Antiseptics (Veterinary) . . . . . . . . . . . . . . . . . 26 

Anvil Tools . . . . . . . . . . . . . . . . . . .35, 53-54, 70 

Anvils . . . . . . . . . . . . . . . . . . . . . . . . . 40-42, 51 

Aprons . . . . . . . . . . . . . . . . . . . . . . . . . 28-29, 37 

Benders, Pipe . . . . . . . . . . . . . . . . . . . . . . . . 71 

Blacksmith Kits . . . . . . . . . . . . . . . . . . . . . . . 90 

Blacksmith Classes . . . . . . . . . . .39, Back Cover 

Books . . . . . . . . . . . . . . . . . . . . . . . . . . . 92-123 

Brushes (Wire) . . . . . . . . . . . . . . . . . . . . 57, 68 

Clothing (Work Shirts, T-Shirts) . . . . . . . . . . . 91 

Coke & Coal . . . . . . . . . . . . . . . . . . . . . . . . . 80 

Drills, Drill Presses . . . . . . . . . . . . . . . . 64-65, 72 

Farrier Tools . . . . . . . . . . . . . . . . . . . . . . . . 30-36 

Feed Supplements . . . . . . . . . . . . . . . . . . . . 27 

Files & Rasps . . . . . . . . . . . . . . . . . . . . . . . . 31 

Fly Presses & Tooling . . . . . . . . . . . . . . . . . 78-79 

Forges, Coal & Gas . . . . . . . . . . . . . . . 80, 82-87 

Furnaces . . . . . . . . . . . . . . . . . . . . . . . 85, 88-89 

Gift Items (Puzzles, Hats, T-Shirts, Jewelry) . . 91 

Item prices are located in the rear of the catalog . 

They are organized by “Page Number” 

and then Alphabetically by Item Name . 

Books are listed in Alphabetical Order by Title . 

Grinders, Belt Sanders & Buffers . . . . 64, 67, 71 

Hammers, Handles (Hand) . . . . . . . . . . . . . 44-49 

Hoof Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 

Hoof Care & Repair . . . . . . . . . . . . . . . . . . 21-23 

Hoof Pads . . . . . . . . . . . . . . . . . . . . . . . . . 17-20 

Hoof Stands & Shoeing Boxes . . . . . . . . . . . . 15 

Horseshoe Nails . . . . . . . . . . . . . . . . . . . . . . 1-3 

Horseshoes . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 

Liniments (Veterinary) . . . . . . . . . . . . . . . . . . 25 

Metal Finishes, Patinas . . . . . . . . . . . . . . . . . 60 

Metal Forming Stakes & Tools . . . . . . . . . . 50-52 

Power Hammers . . . . . . . . . . . . . . . . . . . 74, 77 

Power Tools (Corded & Cordless) . . . . . . . . 63-69 

Punches . . . . . . . . . . . . . . . . . . . . 35-36, 54, 76 

Repousse Supplies . . . . . . . . . . . . . . . . . . . . . 55 

Rivets, Lags, Screws . . . . . . . . . . . . . . . . . 58-59 

Safety Protection (Gloves, Eyewear) . . . . . . . . . 38 

Saws . . . . . . . . . . . . . . . . . . . . . . .63, 66, 70, 72 

Shears . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 73 

Studs (Traction) . . . . . . . . . . . . . . . . . . . . . . .3 

Swage Blocks . . . . . . . . . . . . . . . . . . . . . 51, 52 

Tongs . . . . . . . . . . . . . . . . . . . . . . . . . 56-57, 88 

Videos . . . . . . . . . . . . . . . . . . . . . . . . . 125-130 

Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 

Welding Fluxes, Hardener . . . . . . . . . . . . . . . 81 

Dedication 

This catalog is dedicated to my dear parents whom I miss very much 

and to my son William, the future. 

Thank you to our holy Father God and Jesus Christ for giving me the 

strength to persevere. We ask for your continued guidance 

in the operation of Pieh Tool Company. 

Thank you to all our customers. We appreciate your business and 

hope we enhance your lives by touching it. 

Sincerely, Amy Pieh 

Catalog Coupon $5 .00 Off Order 

Present this coupon at time of order and we will deduct $5 .00 

from your order when this coupon is received . 

Please cut and mail coupon to: Pieh Tool Company, Inc . 

661 E . Howards Rd . Suite J Camp Verde, AZ 86322 U .S .A . 

*Only one coupon per person 

Pieh Tool Company, Inc. 1-888-743-4866 a

About the President 

Many people ask me how I ended up selling horseshoes and blacksmith supplies. 

Their second question usually is: "Why did you pick Camp Verde, Arizona?" 

It's a simple story… 

In 1960, seven years before I was born, my father Bill and mother Bonnie started 

Centaur Forge, Ltd. I grew up knowing blacksmiths and shoers. Didn't everybody? 

Dad and Mom's passion for taking care of the folks who depended upon them 

brought them success in their business. They also made a lot of friends. As far as 

my parents were concerned, 'caring' was a hundred and ten percent effort. It was 

always their goal to provide the widest selection of products from books to anvils for 

the best value. That stuck with me. 

That passion for caring stuck with me when I joined the United States Air Force and became a safety 

inspector on aircraft. After I separated from the military I continued as a metallurgical inspector in the 

aerospace, fossil fuel and nuclear power industries worldwide. 

When my father became seriously ill and died in 2000, I moved back to Wisconsin to help at the company. 

Not long after, my mother also passed away. In the two years I worked at my parents' company, I realized 

that there was more to my returning home than just helping out -- I was carrying on a forty-year family 

tradition. 

Everyday when I awakened I could hardly wait to get to the office. Centaur Forge's customers had become 

my parents' friends, and their friends were quickly becoming my friends too. Just like my parents, I wanted 

to be there for my friends when they needed me. I realized how much I loved this business. 

When the company was sold, I went back to work at the Palo Verde Nuclear Generating Station in Arizona, 

but I just could not walk away from the industry or the customers who had now become my friends. I asked 

for and received loads of advice from a lot of folks. I prayed a lot. Then one day I visited Camp Verde. 

Looking across the western landscape I thought, “You know Amy face it, you miss the blacksmith and 

horseshoe supply business and the people. You like the wide-open spaces here. And the neighbors are 

terrific. Dad and Mom would be very proud that I established a business and carried on the traditions they 

practiced over four decades.” Just then there was this little voice that whispered out of nowhere. "You can 

do it Amy, right here." And well, what can I say? Welcome to Pieh Tool Company, Inc! 

Pieh Tool Company is my dream in the making. It is my 'thank you' to two of the most wonderful people I 

ever knew, Bonnie and Bill Pieh. 

My Chief Director and son, William Theodore, my staff and I look 

forward to your visit at our store for a cup of coffee. Come see 

what's new in the world of blacksmithing and horseshoeing. Our dog 

and company mascot Ally, will be waiting at the door to greet you. 

Until then, we are only a web page or a phone call away from your 

horseshoeing and blacksmithing needs. If you're not near a computer, 

just pick up the phone and dial toll free. 

We'll be happy to hear from you and process your order in the same 

prompt, friendly and efficient manner my parents did…and always at 

the best prices in the industry. 

Warmest regards, 

Amy Pieh, President 

b Pieh Tool Company, Inc.

HORSESHOE NAILS 

Manufactured from high quality steel. Capewell nails are carefully monitored in production procedures and 

are uniformly tempered to give optimum elasticity. Designed and formed to permit easy, accurate driving. 

Capewell City 

For use with saddle horses, working horses and ponies. 

Item # Size Count/Box Length (in.) Boxes/Case U/M Box Weight 

CCH5/100 CH 5 100 1.87 32 BX 0.60 lb 

CCH5/250 CH 5 250 1.87 16 BX 1.50 lb 

CCH5/500 CH 5 500 1.87 8 BX 3.00 lb 

CCH6/100 CH 6 100 2.10 16 BX 0.80 lb 

CCH6/250 CH 6 250 2.10 8 BX 1.75 lb 

CCH7/100 CH 7 100 2.85 16 BX 0.95 lb 

CCH7/250 CH 7 250 2.85 8 BX 2.38 lb 

CCH8/250 CH 8 250 2.46 8 BX 2.63 lb 

Capewell City Slim Blade 

Drives with less hoof displacement. Great for Sliding Plates. 

CSB4.5/250 SB 4-1/2 250 1.76 16 BX 1.75 lb 

CSB4.5XL/250 SB 4-1/2 250 1.81 16 BX 1.03 lb 

CSB5/250 SB 5 250 1.95 16 BX 1.88 lb 

CSB5/500 SB 5 500 1.95 8 BX 3.00 lb 

CSB6/250 SB 6 250 2.15 8 BX 1.75 lb 

Capewell Race 

For racing and reining horses (racing and sliding plates) and in smaller feet. 

CRN3/250 RN 3 250 1.37 32 BX 0.66 lb 

CRN3.5/250 RN 3-1/2 250 1.50 32 BX 0.81 lb 

CRN4/100 RN 4 100 1.62 32 BX 0.40 lb 

CRN4/250 RN 4 250 1.62 16 BX 1.00 lb 

CRN4.5/100 RN 4-1/2 100 1.75 32 BX 0.50 lb 

CRN4.5/250 RN 4-1/2 250 1.75 16 BX 1.06 lb 

CRN5/250 RN 5 250 1.83 16 BX 1.00 lb 

Capewell Platers Special 

For racing and reining horses. Length of a 5, head of a 4.5 race nail - good for small shoes. 

CPS5/500 PS-5 *S/O 500 1.83 8 BX 2.25 lb 

Capewell Regular 

Used for larger shoes - farm, draft and show horses, and also used for resets. 

CRH5/250 RH-5 250 1.95 8 BX 1.50 lb 

CRH6/250 RH-6 250 2.12 8 BX 2.00 lb 

CHR7/100 RH-7 100 2.31 16 BX 0.90 lb 

CRH7/250 RH-7 250 2.31 8 BX 2.26 lb 

CRH8/100 RH-8 100 2.50 16 BX 1.40 lb 

CRH9/100 RH-9 100 2.68 8 BX 1.90 lb 

CRH10/100 RH-10 100 2.87 8 BX 1.63 lb 

CRH12/100 RH-12 100 3.22 8 BX 1.88 lb 

CRH16/100 RH-16 100 3.72 8 BX 2.00 lb 

Capewell Countersunk 

Used for hand-made and foreign-made shoes. 

CCS5/250 CS-5 *S/O 250 1.87 16 BX 1.50 lb 

Cooper City Lite 

Versatile light nail for thin walled hooves, smaller/lighter keg or hand-made shoes. 

Item # Size Count/Box Length (mm) Boxes/Case U/M Box Weight 

CS5L250 Lite 5 250 48 16 BX 1.20 lb 

CS5L500 Lite 5 500 48 8 BX 2.75 lb 

CS10L100 Lite 10 100 71 8 BX 1.50 lb 

CS12L100 Lite 12 100 80 8 BX 1.63 lb 

*S/O = SPECIAL ORDER ITEMS 

Capewell City 

Capewell City Slim 

Capewell Race 

Capewell Plater Special 

Capewell Regular 

Capewell Countersunk 

Cooper Lite 

Nail Styles 

"CH" City Head nails are an excellent choice for a variety of shoes. They work especially well in drop-forged shoes. 

“Combo” Combo features larger head with slim shank making it perfect for resets and shoes with larger nail holes. 

“CS” Countersunk nails are used for hand-made and foreign-made shoes. 

"E" E nails are styled after the traditional European design and work well in both hand-made and a variety of imported shoes. 

“E-Slim" E-Slim nails feature a more defined head and a much slimmer shank than the regular E nails, allowing them to be used in 

a wider variety of shoes, including ones punched for City Head nails. For pleasure and sport horses. 

“FROST” FROST nails are used to provide traction in icy conditions. 

“MUD” MUD nails are used to provide traction in mud conditions. 

"RN" Race nails are the perfect choice for the plater and can be used in pony shoes and sliding plates. 

“RH” Regular Head nails feature a larger head and used for larger shoes -- farm, draft, show horses and for resetting. 

Pieh Tool Company, Inc. 1-888-743-4866 1


Delta City 

Delta Race 

Delta E 

Delta E Slim 

Delta DEX 

Mustad City 

Mustad Race 

Mustad E 

Mustad Frost 


The Delta nail features a sharp point, an exact bevel and a slightly longer shank than other brands. 

Delta City 


D4.5/250 CH 4.5 250 44 24 BX 1.21 lb 

D5/250 CH 5 250 49 12 BX 1.67 lb 

D5/500 CH 5 500 49 8 BX 3.38 lb 

D6/250 CH 6 250 54 16 BX 2.00 lb 

D6/500 CH 6 500 54 8 BX 4.13 lb 

Delta City Slim 

D5SL/250 CH 5 Slim 250 52 12 BX 1.58 lb 

D5SL/500 CH 5 Slim 500 52 8 BX 3.25 lb 

Delta Combo Slim (Larger head than the City nail-perfect for resets) 

D5CSL/250 Combo 5 Slim 250 52 12 BX 1.58 lb 

D5CSL/500 Combo 5 Slim 500 52 8 BX 3.25 lb 

Delta Race 

D3.5R/250 RN 3.5 250 40 24 BX 0.92 lb 

D4R/250 RN 4 250 43 24 BX 1.00 lb 

D4.5R/250 RN 4.5 250 46 24 BX 1.17 lb 

Delta E and E Slim 

D2E/250 E-2 250 45 24 BX 1.29 lb 

D4E/250 E-4 250 51 12 BX 1.75 lb 

D5E/500 E-5 500 54 8 BX 1.85 lb 

D3ESL/250 E-3 Slim 250 48 12 BX 1.50 lb 




Delta DEX (E Combo) 

This is a four-sided tapered head nail. 

DX/500 DEX 50 500 50 8 BX 3.05 lb 

The Mustad nail has a slimmer, sleeker shank and drives easy. Reinforced, tapered head fits properly in 

most standard shoes. New head ribbing allows easy identification of inner side. Sharper beveled points 

for easy hoof wall exit and proper stiffness for straight accurate driving without bending. Clinches easily 

after wall exit for firm holding. 

Mustad City 

For use with saddle horses, working horses and ponies. 

MCH4.5/250 CH 4.5 250 48 16 BX 1.31 lb 

Mustad Race 

Used for race horses. 

MRN3/250 RN 3 250 35 16 BX 0.78 lb 

MRN3.5/250 RN 3.5 250 38 16 BX 1.69 lb 

MRN4/250 RN 4 250 41 16 BX 1.06 lb 

MRN4.5/250 RN 4.5 250 45 16 BX 1.06 lb 

MRN5/250 RN 5 250 48 16 BX 1.31 lb 

MRN6/250 

Mustad E 

RN 6 250 51 16 BX 1.31 lb 

European style for European and hand-made shoes. 

ME2/250 E-2 250 41 16 BX 1.25 lb 

ME3/250 E-3 250 45 16 BX 1.44 lb 

ME4/250 E-4 250 48 8 BX 1.63 lb 

ME5/250 E-5 250 51 8 BX 1.88 lb 

ME6/250 E-6 250 54 8 BX 2.13 lb 

ME7/250 E-7 250 57 8 BX 2.38 lb 

ME8/100 E-8 100 61 8 BX 1.10 lb 

ME9/100 E-9 100 64 8 BX 1.20 lb 

ME10/100 E-10 100 68 8 BX 1.38 lb 

ME12/100 E-12 100 77 8 BX 1.75 lb 

Mustad E Slim 

European style for thin walls & brittle hooves. Longer and thinner than a normal E nail. 

ESL3/250 E-3 Slim 250 48 16 BX 1.44 lb 

ESL4/250 E-4 Slim 250 51 8 BX 1.60 lb 

ESL5/250 E-5 Slim 250 54 8 BX 1.88 lb 

Mustad Frost (Traction Nail) 

Used for icy conditions. 

FROST4/100 Frost 4 *S/O 100 50 16 BX 1.06 lb 



2 1-888-743-4866 Pieh Tool Company, Inc.

Mustad MUD (Traction Nail) 

Used to provide traction in mud. 


MUD4/100 MUD 4 *S/O 100 44 16 BX 1.00 lb 

MUD5/100 MUD 5 *S/O 100 47 16 BX 1.50 lb 

MUD6/100 MUD 6 *S/O 100 51 16 BX 2.00 lb 

Mustad Combo 

For thin walls and brittle hooves. 

COMBO5 Combo 5 250 48 8 BX 1.44 lb 

COMBO6 Combo 6 250 54 8 BX 2.88 lb 

Mustad MX 

Slim shank with four-sided tapered head. MX 50 fits 6 mm shoes, MX 60 fits 8 mm shoes. 

The MX nail has been developed especially for extra thin walled hooves. 

MX50/250 MX 50 250 50 8 BX 1.31 lb 

MX60/250 MX 60 *S/O 250 55 8 BX 1.63 lb 

MX70/250 MX 70 *S/O 250 59 8 BX 1.80 lb 

Packaged in convenient and durable plastic containers that resist moisture and damage. A rolled nail 

with high tensile strength. 

Item # Size Count/Box Length (in) Boxes/Case U/M 

Vector E Slim 

VES3/250 ES 3 250 1.85 12 BX 

VES4/250 ES 4 250 2.05 12 BX 

Vector Slim 

VSB5/250 SB 5 250 2.00 12 BX 

VSB5/1250 SB 5 1250 2.00 4 BX 

Vector City 

VCH5/250 CH 5 250 1.90 12 BX 

VCH5/1250 CH 5 1250 1.90 4 BX 

VCH6/250 CH 6 250 2.15 12 BX 

Vector Race 

VRN3.5/250 RN 3.5 250 1.50 12 BX 

VRN4.5/250 RN 4.5 250 1.60 12 BX 

VRN5/250 RN 5 250 1.80 12 

Vector VX 

VX50/250 VX 50 250 1.95 12 BX 

VX60/250 VX 60 250 2.15 12 BX 

Vector Special 

VS4.5/250 Special 4.5 250 1.65 12 BX 

VS5/250 Special 5 250 1.70 12 BX 


Drive-In Studs (Plugs) DRILL BIT AND TAP GUIDE 

This chart is helpful in the selection of 

correct drill bits and taps for use with studs. 

Size Drill Bit Taper Tap 

5/16” 17/64” 5/16” 

9/16” 15/32” 9/16” 

Mustad P-9 Mustad P-11 Mustad P-13 

3/8” 5/16” 3/8” 

Mustad Drive-In Studs 

Mustad’s carbide tip studs offer superior traction 

on ice, snow, mud, and blacktop without time 

consuming welds. 

Item # 

70682 Stud, P-9 (9/16”) 

Shows 5/16” above the shoe, 9/16” diameter. 

70694 Stud, P-11 (3/8”) 

Shows 1/4” above the shoe, 3/8” diameter. 

70697 Stud, P-13 (5/16”) 

3/8” taper into shoe. 


Drill Stud Rivet 

3/32” #14 Copper Rivets 



See our Stud Punches on page 35. 

Mustad MUD 

Mustad Combo 

Mustad MX 

Pieh Tool Company, Inc. 1-888-743-4866 3 

Mustad 

E Slim 

Vector Nails 

3-1/2 Race 

4-1/2 Race 

5 Race 

4-1/2 Special 

5 Special 

5 Slim 

5 City 

6 City 

VX 50 

VX 60 

ES 3 

ES 4 

HELPFUL TIPS FOR STUDS 

The shoes should always be fitted to the foot before 

drilling holes, or the holes will become egg shaped or 

the WearTrac/Borium may be damaged. We recommend 

practicing on another horseshoe or piece of scrap steel. 

Each method has advantages and disadvantages. The 

decision is made based on the horse, the shoe and 

usage, economics and available tools and equipment. 

Screw Calks: Fit the shoe to the foot, then 

remove it. Holes are drilled, followed by the tapered 

tap, using cutting oil liberally. It is suggested that the 

calks are put into the shoe before it is nailed the first 

time (because if it was improperly threaded. it could 

be corrected before removing the shoe). The main 

advantage of using screw calks is the ability to change 

the calks or insert plugs in place of the calks at any 

time without the necessity of shoe removal. 

Drive Calks: Following the Screw Calk method 

with the exception of using a tapered punch (greased) 

instead. The holes are dried thoroughly and calks are 

driven in and the shoe nailed on. The tungsten pins 

must not be struck on directly with a steel hammer, 

but use a 1” round drift with a hole countersunk in the 

center so the force of the blow will not be in the insert.

HORSESHOES STEEL 

Saddle (Keg) - Plain 

St. Croix Plain 

St. Croix Plain is a basic flat and creased horseshoe, designed 

for versatile use and is easily modified for a front or hind shape. 

Regular: 3/8”, Lites: 5/16” thick. Advised nails: City Head. 

Packaged in 20 pair boxes (* are 10 pr/box). 

Lite Plain 

Item # Pair Wt. U/M 

SC11110 Lite Plain, 3x0 14.2 oz PR 

SC11111 Lite Plain, 2x0 16.8 oz PR 

SC11112 Lite Plain, 0 19.0 oz PR 



SC11115* Lite Plain, 3 27.2 oz PR 

Plain 

SC10110 Plain, 3x0 15.8 oz PR 

SC10111 Plain, 2x0 19.6 oz PR 

SC10112 Plain, 0 21.4 oz PR 

SC10113 Plain, 1 24.2 oz PR 

SC10114 Plain, 2 27.6 oz PR 

SC10115* Plain, 3 30.2 oz PR 

Kerckhaert SX7 (Light - 7mm) 

The Kerckhaert SX-7 is an ideal shoe for the quarter horse or 

light riding horse. It is made from a light but tough steel and 

is precisely punched. The nail head locks securely in the 

countersunk crease. Popular in America. Advised nails: City 

Head or Slim Blade. All packaged in 15 pair boxes. 


30SX7F187 SX7 Front, 3x0 18 oz PR 

20SX7F187 SX7 Front, 2x0 20 oz PR 

0SX7F187 SX7 Front, 0 20 oz PR 



30SX7H187 SX7 Hind, 3x0 18 oz PR 

20SX7H187 SX7 Hind, 2x0 20 oz PR 

0SX7H187 SX7 Hind, 0 20 oz PR 


2SX7H187 SX7 Hind, 2 *S/O 22 oz PR 

Kerckhaert SX8 (Regular - 8mm) 

The Kerckhaert SX-8 is wider and thicker than the SX-7. The 

steel size gives more support in a tough, workable material. 

Very popular shoe in America. Advised nails: City Head and 

Slim Blade. All packaged in 15 pair boxes. 


20SX8F198 SX8 Front, 2X0 22 oz PR 





20SX8H198 SX8 Hind, 2X0 22 oz PR 





*S/O = SPECIAL ORDER ITEM 

Kerckhaert 

SX7 

Front & Hind 

Kerckhaert 

SX8 

Front & Hind 

St. Croix 

Plain 

Diamond Classic 

Diamond Classics have the precision spaced and punched nail 

hole pattern that allows more accurate nail placement, wide 

web for increased bearing surface and hoof wall support. 

Packaged in 25 pound boxes. 


DC000 Classic, 3x0 13.4 oz PR 

DC00 Classic, 2x0 15.4 oz PR 

DC0 Classic, 0 17.4 oz PR 



Kerckhaert 

SX7 Front QC 

Kerckhaert 

SX7 Hind SC 

Kerckhaert SX7 Clipped (Light - 7mm) 


20SX7F187Q SX7 Front QC, 18x7mm, 2x0 1.20 lb PR 

0SX7F187Q SX7 Front QC, 18x7mm, 0 1.20 lb PR 



30SX7H187S SX7 Hind SC, 18x7mm, 3x0 1.20 lb PR 

20SX7H187S SX7 Hind SC, 18x7mm, 2x0 1.20 lb PR 

0SX7H187S SX7 Hind SC, 18x7mm, 0 1.20 lb PR 



SC = Side Clip 

QC = Quarter Clip 

Kerckhaert SX8 

Front QC 

Diamond 

Classic 


Hind SC 

Kerckhaert SX8 Clipped (Regular - 8mm) 


20SX8F198Q SX8 Front QC, 2x0 1.53 lb PR 

0SX8F208Q SX8 Front QC, 0 1.53 lb PR 





20SX8H198S SX8 Hind SC, 2X0 1.53 lb PR 

0SX8H198S SX8 Hind SC, 0 1.53 lb PR 






Saddle (Keg) Wide Web 

St. Croix EZ 

St. Croix EZ Shoe protects a hoof with a wider web. It fits 

without going to the anvil. 5/16” thickness. Advised nails: 

City Head. Packaged in 20 pair boxes (* are 10 pr/box). 


SC14611 EZ Front, 2x0 19 oz PR 

SC14612 EZ Front, 0 23 oz PR 



SC14615* EZ Front, 3 31 oz PR 

SC14616* EZ Front, 4 33 oz PR 

SC14711 EZ Hind, 2x0 18 oz PR 

SC14712 EZ Hind, 0 22 oz PR 



SC14715* EZ Hind, 3 30 oz PR 

SC14716* EZ Hind, 4 32 oz PR 

St. Croix EZ Plus 

A wider web with extra ground coverage for additional 

support, and finished boxed heels to make the farrier’s job 

easier. Unclipped, symmetrical front, left and right hind 

patterns. Graduating thickness 5/16” to 3/8”. Size 1-3, 

punched CH5, and size 4, E5. Packaged in 20 pair boxes 

(* are 10 pr/box). 


SCEZPF1 EZ Plus Front, 1 24 oz PR 

SCEZPF2* EZ Plus Front, 2 32 oz PR 

SCEZPF3* EZ Plus Front, 3 40 oz PR 

SCEZPF4 EZ Plus Front, 4 48 oz PR 

SCEZPH1 EZ Plus Hind, 1 24 oz PR 

SCEZPH2* EZ Plus Hind, 2 32 oz PR 



Diamond Special Plain 

The Diamond Special has a wide web and provides more 

hoof wall support and protection to hoof. Easily worked cold 

to fit either front or hind hooves. Advised nails: City Head. 



DS000 Special, 3X0 (2 Pony) *S/O 14.8 oz PR 

DS00 Special, 2X0 16.6 oz PR 

DS0 Special, 0 18.2 oz PR 

DS1* Special, 1 21 oz PR 

DS2* Special, 2 25 oz PR 

DS4* Special, 4 36.4 oz PR 

DS5* Special, 5 44.4 oz PR 

Grand Circuit Shapers (Hinds Only) 

A steel shoe with the shape most like the natural shape of 

a horse’s hoof before being distorted by ground pressure. 

For balanced motion, ease of fit and most natural motion 

for the horse. The Grand Circuit Shaper is designed to give 

ease of breakover and direction in flight while reducing the 

possibility of forging or over reaching. 

Packaged in 15 pair boxes. 



St. Croix 

EZ Front 

St. Croix 

EZ Hind 



St. Croix 

EZ Plus 

Front 

St. Croix 

EZ Plus 

Hind 

Diamond 

Special 

St. Croix 

Xtra Wide 

Web 

GC 

Shaper 

St. Croix EZ Clipped 

Protect a hoof with wider web, without going to 

aluminum or doing more work at the anvil. It fits! 

Hind feet need traction to push off, plus support and 

protection. 5/16” thickness. Find it all in one package in 

this fine-fitting hind pattern. Packaged in 10 pair boxes. 


SC15621 EZ Front QC, 2x0 1.30 lb PR 

SC15622 EZ Front QC, 0 1.50 lb PR 




SC15626 EZ Front QC, 4 *S/O 2.10 lb PR 

SC15721 EZ Hind SC, 2x0 1.30 lb PR 

SC15722 EZ Hind SC, 0 1.50 lb PR 




SC15726 EZ Hind SC, 4 *S/O 2.10 lb PR 

St. Croix EZ 

Hind SC 

St. Croix EZ Plus, Side Clipped 

St. Croix EZ 

Front QC 


SCEZPF1-SC EZ Plus Front, SC, 1 26 oz PR 




SCEZPH1-SC EZ Plus Hind, SC, 1 26 oz PR 

SCEZPH2-SC EZ Plus Hind, SC, 2 34 oz PR 

SCEZPH3-SC* EZ Plus Hind, SC, 3 42 oz PR 

SCEZPH4-SC* EZ Plus Hind, SC, 4 50 oz PR 

St. Croix 

EZ Plus 

Front, SC 

St. Croix 

EZ Plus 

Hind, SC 

St. Croix Xtra 

St. Croix Xtra has extra width, extra protection and is 

perfect for "in-between" sized feet. 5/16” thickness. 

Advised nails: City Head. Packaged in 20 pair boxes 

(* are 10 pr/box). 


SC14111 Xtra WW, 2x0 18 oz PR 

SC14112 Xtra WW, 0 23.6 oz PR 

SC14113 Xtra WW, 1 27 oz PR 

SC14114 Xtra WW, 2 28.8 oz PR 

SC14115* Xtra WW, 3 30.6 oz PR 

SC14116* Xtra WW, 4 32 oz PR 

SC14117* Xtra WW, 5 34.4 oz PR 


GCSH-H5 GC Shaper Hind, 2x0 (5) 16 oz PR 

GCSH-H6 GC Shaper Hind, 0 (6) 20 oz PR 





Saddle (Keg) Toe/Heeled 

St. Croix Heeled 

St. Croix Heeled has clean, angled heel calks to help 

horses on rough ground. 3/8” thickness. Advised nails: 



SC10310 Heeled, 3x0 *S/O 17.2 oz PR 

SC10311 Heeled, 2x0 *S/O 20.2 oz PR 

SC10312* Heeled, 0 23.2 oz PR 




Saddle (Keg) Concave 

St. Croix Eventer 

The St. Croix Eventer is a wide rolled-toe shoe with 

a concave hoof surface, graduated thickness 9/32” to 

3/8” and a full, clean crease. Natural shape with heel 

platform ready for drilling and tapping. Advised nails: 

City Head. Packaged in 20 pair boxes. (* are 10 pr/box). 


SC14810 Eventer Front, 3x0 17 oz PR 

SC14811 Eventer Front, 2x0 19 oz PR 

SC14812 Eventer Front, 0 23 oz PR 



SC14815* Eventer Front, 3 31 oz PR 

SC14816* Eventer Front, 4 33 oz PR 

SC14910 Eventer Hind, 3x0 17 oz PR 

SC14911 Eventer Hind, 2x0 19 oz PR 

SC14912 Eventer Hind, 0 23 oz PR 



SC14915* Eventer Hind, 3 31 oz PR 

SC14916* Eventer Hind, 4 33 oz PR 

St. Croix Eventer Plus 

A wider web with extra ground coverage for additional 

support, and finished boxed heels to make the farrier’s 

job easier. Rolled-toe shoe with concave hoof surface, 

graduated thickness 5/16” to 3/8”, and a full, clean 

crease up to the ready-to-drill platform. Advised nails: 

0-3 CH5 and size 4, E5. Packaged in 10 pair boxes. 


SC14842 Eventer Plus Front, 0 23 oz PR 


SC14844* Eventer Plus Front, 2 28 oz PR 

SC14845* Eventer Plus Front, 3 31 oz PR 


SC14942 Eventer Plus Hind, 0 23 oz PR 


SC14944* Eventer Plus Hind, 2 28 oz PR 

SC14945* Eventer Plus Hind, 3 31 oz PR 



Magnets and Knife 

Sharpeners 

are on page 61. 

St. Croix 

Heeled 

St. Croix 

Toed & 

Heeled 

St. Croix 

Eventer Front 

St. Croix 

Eventer Hind 

St. Croix 

Eventer Plus 

Front 

St. Croix 

Eventer Plus 

Hind 

St. Croix Toed and Heeled 

St. Croix Toed and Heeled is a maximum-traction shoe 

with rounded toe grab. 3/8” thickness. Advised nails: 



SC10410 Toed & Heeled, 3x0 17.8 oz PR 

SC10411 Toed & Heeled, 2x0 20.8 oz PR 

SC10412* Toed & Heeled, 0 23.6 oz PR 





Front SC 

St. Croix 

Eventer 

Hind SC 

St. Croix Eventer, Side Clipped 



SC15822 Eventer Front SC, 3x0 1.10 lb PR 

SC15821 Eventer Front SC, 2x0 1.30 lb PR 

SC15822 Eventer Front SC, 0 1.50 lb PR 





SC15920 Eventer Hind SC, 3x0 1.10 lb PR 

SC15921 Eventer Hind SC, 2x0 1.30 lb PR 

SC15922 Eventer Hind SC, 0 1.50 lb PR 






Plus Front St. Croix Eventer 

Plus Hind 

St. Croix Eventer Plus, Side Clipped 

Packaged in 10 pair boxes 


SC15832 Eventer Plus Front SC, 0 23 oz PR 





SC15932 Eventer Plus Hind SC, 0 23 oz PR 






Saddle (Keg) Concave 

Kerckhaert Triumph 

This new broad toe rim shoe is based on Kerckhaert’s aluminum 

Triumph shoe. It provides excellent traction, enhanced breakover 

and built-in sole relief. They are available in front and hind 

patterns from sizes 00 to 3. Punched for City Head nails such as 

the Delta Slim and Combo nail. Packaged in 15 pair boxes. 


20TSF Triumph Front, 2x0 20 oz PR 

0TSF Triumph Front, 0 22 oz PR 




20TSH Triumph Hind, 2x0 20 oz PR 

0TSH Triumph Hind, 0 22 oz PR 




Kerckhaert 

Triumph 

Front & Hind 

Tennessee Walking Toe Weight 

Diamond 

The Diamond Toe Weight shoes are designed for Tennessee walking horses and breeds 

requiring extra weights. Forged with countersunk nail holes and weight at the toe. Sizes 1-2 

have six nail holes, size 3 has eight. Packaged in 10 pair boxes. 


1TW Toe Weight, 1 30.0 oz PR 

2TW Toe Weight, 2 34.0 oz PR 

3TW 

Pony 

St. Croix 

Toe Weight, 3 40.6 oz PR 

Shoes for our smallest customers! This is a smaller version 

of the St. Croix “Plain” shoe. Dropped-forged for 

strength. 1/4” thick. Packaged in 40-pair boxes. 


SC25118 Pony, (3-3/4 x 3-5/16), 0 10.0 oz PR 

SC25119 Pony, (4-1/16 x 3-7/16), 1 10.8 oz PR 

Diamond 

The Diamond Pony shoe is forged from special steel 

(like the regular horseshoe) to give long wear. Six 

properly spaced nail holes fit the average pony hoof. 

NOTE: For No. 2 Pony shoe, use Diamond 3x0 Classic 

Plain horseshoe. Packaged in 40 pair boxes. 


0PONY Pony, (3-3/4 x 3-5/16), 0 10.0 oz PR 

1PONY Pony, (4-1/16 x 3-7/16), 1 10.8 oz PR 

Kerckhaert 

This has a natural shape that makes it ideal for ponies 

and horses with smaller feet. It is a good shoe for 

miniatures as well. It is punched for Race nails. Shoes 

are 16x6 mm. Packaged in 15 pair boxes. 


80STDPO Pony, 8x0 10.0 oz PR 




Kerckhaert Pony 

Vulcan RM 

Vulcan RM Steel 

The Vulcan RM Shoes have a conventional concave design in 

front and hind patterns that allow farriers to achieve a better 

fit more quickly because the shoe is designed to fit around the 

coffin bone with few alterations, meaning the widest part of the 

shoe aligns with the widest part of the foot quite well right out of the 

box. Packaged in 10 pair boxes. 


VRMF20 Vulcan RM Front, 2x0 19.5 oz PR 

VRMF0 Vulcan RM Front, 0 21.5 oz PR 



VRMH20 Vulcan RM Hind, 2x0 20.2 oz PR 

VRMH20 Vulcan RM Hind, 0 22.1 oz PR 



Diamond Toe Weight 

St. Croix Pony Mule 

St. Croix 

St. Croix Mule 

St. Croix Mule shoes are easy to nail on with added 

heal traction. Punched for City Head nails. Shoes are 

3/8” thick. 3/8” thick. Packaged in 20 pair boxes. 


SC25137 Mule, 3x0 

(4-3/8 x 3-5/8) 

14.8 oz PR 

Diamond Pony 

SC25136 Mule, 2x0 

(4-3/8 x 3-7/8:) 

19.0 oz PR 

SC25135 Mule, 0 

(5 x 4-1/8) 

19.6 oz PR 

Pieh Tool 

rebuilds nippers. 

We have a fast turnaround! 



Saddle (Keg) Rimmed 

Steel rim shoes provide excellent traction. We offer three 

weights of rim shoes. The regular weight, light and ultra light. 

The ultra light makes a great training plate. 

St. Croix Ultra Lite Rim (Training Plate) 

The St. Croix Ultra Lite Rim has traction without weight! Thin 

and used as a training plate, forged for strength with a full 

crease and rolled toe. Advised nails: City Head. 



SC13220 Ultra Lite Rim, 3x0 11 oz PR 

SC13221 Ultra Lite Rim, 2x0 12 oz PR 

SC13222 Ultra Lite Rim, 0 14 oz PR 



St. Croix Lite Rim 

Full-crease and outside-rim traction, but relief from grab! 

Unique rolled toe eases breakover. 



SC11210 Lite Rim, 3x0 14.6 oz PR 

SC11211 Lite Rim, 2x0 16.6 oz PR 

SC11212 Lite Rim, 0 18.8 oz PR 



SC11215* Lite Rim, 3 25.8 oz PR 

Steel Pleasure 

Thoro’Bred 

New style in training plates. The outer wall is slanted or 

beveled back allowing ease of break over. The nail groove will 

lock in 4-1/4 City Head nail tightly. The width is .790 inch for good 

hoof protection without being too heavy or clumsy. Set of 4 shoes. 

Item # U/M 

3SPF4 TB Pleasure Steel Front, #4 *S/O SET 



3SPH4 TB Pleasure Steel Front, #4 *S/O SET 




Steel 

Pleasure 

Be sure to look at all of the 

Horseshoeing books in the 

back of the catalog! 

Pages 120-122 

Shoe 

Thickness: 

Ultra Lite - 1/4” 

Lite - 3/8” 

Reg - 7/16” 

St. Croix Ultra 

Lite Rim St Croix Rim 

St. Croix Rim 

St. Croix Rim shoes have full-crease and outside-rim traction, but 

relief from grab! The unique rolled toe eases breakover. Advised 

nails: City Head. Packaged in 20 pair boxes (* are 10 pr/box). 


SC10210 Rim, 3x0 16.4 oz PR 

SC10211 Rim, 2x0 19.0 oz PR 

SC10212 Rim, 0 22.0 oz PR 

SC10213 Rim, 1 24.6 oz PR 

SC10214 Rim, 2 26.6 oz PR 

SC10215* Rim, 3 29.0 oz PR 


Equi-Librium Top Equi-Librium 

Equi-Librium 

Side Clipped 

Equi-Librium 

The Equi-Librium shoe is now the “Official Horseshoe of the 

Tevis.” Overall, Equi-Librium is a sport shoe for performance 

horses and all horses that have to make (fast) turns in their 

work, a great shoe for Dressage. Although the design of the Equi- 

Librium appears symmetrical some anatomical adaptations are made 

resulting in a definite left and right shape. The outside branch is slightly 

longer, with the nail holes punched a fraction coarser for optimum fitting 

and nailing on. The extra wide toe area is forged with a 2 dimensional 

convex curve allowing the horse to fluently breakover in any direction 

required. Special care was taken to ensure that the centre of mass 

of the shoe matches the Centre of Pressure (CoP) during mid-stance 

of the hose, thereby creating the perfectly balanced hoof. The inside 

edge on the ground surface has a balanced concave section in order to 

reduce weight. This also assists in reducing the build up of mud around 

the shoe. Both the concave section and the crease do not run through 

the heels in order to improve support during landing and to provide a 

perfect base for stud holes. Having full heels also gives the farrier the 

option of forging a variety of innovative alternatives in the heel area of 

the shoe. Advised nails: E Head and E Head Slim. 

Mustad 

Item # U/M 

MUEL20F Mustad Equi-Librium, 2x0 PR 

MUEL20F Mustad Equi-Librium, 0 PR 

MUEL20F Mustad Equi-Librium, 1 PR 

Mustad Side Clipped 

MUEL20FC Mustad Equi-Librium, SC 2x0 PR 

MUEL20FC Mustad Equi-Librium, SC 0 PR 

MUEL20FC Mustad Equi-Librium, SC 1 PR 


Therapeutic 

Natural Balance 

The Natural Balance Shoe (NBS) addresses the biomechanical 

needs of the equine foot for support and protection in a domestic 

environment The patented NBS design, along with a few hoof 

preparation guidelines, will help to properly orient the shoe to the 

coffin bone and prevent hoof capsule distortion. Displacement of 

P3 within the hoof capsule will not occur when the hoof preparation 

and shoe placement directions are followed and those feet that are 

previously distorted usually regain their natural shape. 



NBS2X0F NB, 2x0 Front 1.25 lb PR 

NBS0F NB, 0 Front 1.50 lb PR 






NBS2X0H NB, 2x0 Hind 1.25 lb PR 

NBS0H NB, 0 Hind 1.50 lb PR 





Egg Bar 

Delta Egg Bar 

Delta’s Eggbar is the only European style eggbar with 

no weld. These shoes feature a true crease, precise nail 

holes and an easy-to-fit shape. Advised nails: City Head. 


Item # Pair Wt U/M 

DEBP2X0 Egg Bar, 2x0 1.7 lb PR 

DEBP0 Egg Bar, 0 1.7 lb PR 




FPD SX8, Egg Bar Clipped 

Farrier Product Distribution finished bar shoes are made 

from Kerckhaert Sx8 horseshoes. The SX-8 Egg Bar shoes 

are carefully fabricated using the Kerckhaert shoes and 

the same steel for the bars. The SX-8 is used in a variety 

of disciplines, especially where strength and good support 

are required. Available in Fronts and Hinds; Clipped Only. 

Advised nail: 5 City or 5 Slim. Packaged in 5 pair boxes. 


EBS8F-20 SX8 Egg Bar Front QC, 2x0 27 oz PR 

EBS8F-0 SX8 Egg Bar Front QC, 0 30 oz PR 





EBS8H-20 SX8 Egg Bar Hind QC, 2x0 27 oz PR 

EBS8H-0 SX8 Egg Bar Hind QC, 0 30 oz PR 






Delta Egg Bar 



Front 

SX8 Egg Bar 

Front Clipped 


Hind 

TFT Navicular 

TFT Navicular 

The rocker toe can provide relief for horses suffering 

from chronic navicular disease by reducing navicular 

bone pressure. Has an elevated posterior. Horses with 

low, weak, or underslung heels may not respond as 

well. Packaged in 15 pair boxes (*10 pair box). 


TFT20 TFT Navicular, 2x0 1.15 lb PR 

TFT0 TFT Navicular, 0 1.35 lb PR 

TFT1 TFT Navicular, 1 1.50 lb PR 

TFT2* TFT Navicular, 2 2.05 lb PR 

Delta Egg Bar 

Clipped 

Delta Egg Bar, Clipped 


DCEBP2X0 Egg Bar QC, 2x0 1.7 lb PR 

DCEBP0 Egg Bar QC, 0 1.7 lb PR 




DCEBP4 Egg Bar QC, 4 (Werkman) 2.2 lb PR 

SX8 Straight Bar 

Front Clipped 

FPD SX8 Straight Bar, Clipped 

SX8 Straight Bar Shoes are symmetrical. Available in a 

Front Pattern only. Advised nail: 5 Race or 5 Slim. 



SBS8F0 SX8 Straight Bar Front QC, 0 32 oz PR 




We offer flux coated Carbraze rods, page 81 

as another traction option. 



Sliding Plates 

Kerckhaert 

Sliding Plate 

Kerckhaert Pride 

Kerckhaert Pride Sliding Plates are available in 1” and 1-1/4” with 

tapered heels, 1/4 “ thick. Nail holes are punched for Race 4-1/2 

nails or Platers Special 5. Packaged in 15 pair boxes. 


0SP1 Sliding Plate 1”, 0 23 oz PR 



0SP1.25TH Sliding Plate Tapered 1-1/4”, 0 23 oz PR 



EDSS TK Sliders 

The TK Sliders are a new high quality sliding plate. The general shape 

of the shoe has a bold toe with an arched bevel to allow better breakover 

and better stabilization during the slide. The Inside web of the shoe is 

made as straight as possible on the to minimize friction. The outside 

perimeter of the shoe closely follows the radius of the foot to make for a 

close fit. The shoe is 1” wide. Packaged in 10 pair boxes. 


TKR-000 TK Sliders, 3x0 20 oz PR 

TKR-00 TK Sliders, 2x0 23 oz PR 

TKR-0 TK Sliders, 0 28 oz PR 

TKR-1 TK Sliders, 1 29 oz PR 

Kerckhaert 

Workhorse Light 

Front and Hind 

Kerckhaert 

Sliding Plate 

Tapered 

Draft 

Kerckhaert-Workhorse (Light) 

This Kerckhaert Workhorse Lite is a working horseshoe left unclipped. 

Sized in US sizes (measuring 28x10mm). Advised nails: E. 



5WHF2810 Workhorse Front, 5 3.4 lb PR 




5WHH2810 Workhorse Hind, 5 3.4 lb PR 




Draft, Toe Clipped 

Kerckhaert-Workhorse (Heavy) 

The Workhorse Heavy is a 1/2” x 1-1/4” shoe designed for the heaviest of 

draft horses and features a big strong clip. Toe clips are recommended 

because these horses do not walk at high speed and the there is smaller 

chance of damaging the front legs. Available in a front and hind pattern, 

they come in sizes 3 to 8 and are all toe-clipped. Advised nails: E. 



3WHF2812T Workhorse Front TC, 28x12mm, 3 3.3 lb PR 






Werkman 

Sliding Plate 

Werkman 

Sliding Plate 

Tapered Heel 

TK Slider 

Kerckhaert 

Workhorse 

Light Front TC 

Kerckhaert 

Workhorse 

Light Hind TC 

Werkman 

Werkman Sliding Plates are available in 1" and 1-1/4" models, 

both featuring 6 precise nail holes punched for Race 4-1/2 nails 

or Platers Special 5.Shoes are 1/4” thick. Because of Werkman's 

unique manufacturing process, these shoes have perfectly 

rounded toes without the sharp angles and wobbles found in 

other brands. Packaged in 10 pair boxes. 


WSP12X0 Sliding Plate 1”, 2x0 21 oz PR 

WSP10 Sliding Plate 1”, 0 23 oz PR 




WSP1.250 Sliding Plate 1-1/4”, 0 27 oz PR 




The Tapered Sliding Plate left and right shoes have a slightly 

wider and longer outside branch (trailer) on each heel that can be 

easily modified to the horses’ needs. They come with 4 nail holes 

on each branch for additional flexibility. Shoes are 1/4” thick. 



WSP1TH0 Sliding Plate Tapered 1”, 0 19 oz PR 



WSP1.25TH1 Sliding Plate Tapered 

1-1/4”, 1 

28 oz PR 

WSP1.25TH2 Sliding Plate Tapered 

1-1/4”, 2 

30 oz PR 

Draft, Toe Clipped 

Kerckhaert-Workhorse (Light) 

The Kerckhaert Workhorse Light is 3/8” thick. It features a big 

strong clip, v-style crease and course punching. Toe clips are 

recommended because these horses do not walk at high speed 

and the there is smaller chance of damaging the front legs. They 

come in sizes 5-8 (measuring 28x10mm). Advised nails: E. 



5WHF2810T Workhorse Front TC, 5 3.4 lb PR 




5WHH2810T Workhorse Hind TC, 5 3.4 lb PR 




TC = Toe Clip 

Front Hind 

Kerckhaert Workhorse Heavy Toe Clipped 


3WHH2812T Workhorse Hind TC, 28x12mm, 3 3.2 lb PR 







Smooth Walker Rubber Shoes 

Smooth Walker shoes offer excellent shock absorption by providing protection for horse’s 

legs and additional comfort for the rider. They will not damage ornamental brick surfaces 

making them an asset in places where this is a concern. They reduce stress on horse’s 

legs and lower the risk of injury to the horse, riders and passengers by increased traction 

on asphalt, concrete, marble and other hard surfaces. They are made of a combination of 

natural and synthetic rubbers. The overall thickness of the shoes is typically 1 inch. The 

rubber is molded to cover top, bottom and sides of shoes. They contain a full steel core 

shoe with pre-punched nail holes and feature a double welded toe clip. Horse Mounted 

Police, Horse and Mule Drawn Carriages, Circus Acts and Riders that travel on pavement 

and asphalt prefer this type of shoe for its many benefits. 

Sizes 4x0-1 has 6 nail holes. Sizes 2-9 has 8 nail holes. 

Front 

Front 

Short 

Front 

Narrow 

FRONTS 

Item # U/M 

SW4X0 SW Front, TC, 4x0 PR 

SW3X0 SW Front, TC, 3x0 PR 

SW2X0F SW Front, TC, 2x0 PR 

SW0F SW Front, TC, 0 PR 



SW2F-S SW Front, Short, 2 PR 


SW3F-S SW Front, TC Short, 3 PR 

SW4-S SW Front, Short, 4 PR 





SW7F-S SW Front, TC Short, 7 PR 

SW7F-N SW Front, TC Narrow, 7 PR 

SW7F-NS SW Front, TC Narrow Short, 7 PR 


SW9F 

HINDS 

SW Front, TC, 9 PR 

Item # U/M 

SW2X0H SW Hind, TC, 2x0 PR 

SW0H SW Hind, TC, 0 PR 



SW2H-S SW Hind, TC Short, 2 PR 

SW2H-P SW Hind, TC Pointed, 2 PR 

SW2H-PS SW Hind, TC Pointed Short, 2 PR 






SW5H-T SW Hind, TC Thin, 5 PR 



TC = Toe Clip 

Hind 

Pointed 

Hind 

Pointed 

Short 

RUBBER SHOES 

Front 

Narrow 

Short 


Hind 

Hind 

Thin 

Needing up-to-date 

information? 

Visit us on the Web 


Call for custom sizes 

and shaping. 

ALL SMOOTH WALKERS 

ARE SPECIAL ORDER ITEMS 

Size Width Height Thick 

Opening 

at Heel 

4x0 3-7/8 3-7/8 11/16 1-1/2 

3x0 3-7/8 4-1/4 11/16 1-1/8 

2x0 Fr 4-5/8 4-5/8 13/16 1-7/16 

2x0 Hd 4-3/8 4-3/8 13/16 1-7/8 

0 Fr 4-5/8 4-7/8 13/16 1 

0 Hd 4-3/8 4-5/8 13/16 1-1/2 

1 Fr 5 5-1/2 7/8 1 

1 Hd 4-1/2 5-1/8 7/8 1-1/2 

2 Fr 5 5-3/4 15/16 1-1/2 

2 Fr Sh 5 5-1/4 15/16 2 

2 Hd 5 5-9/16 15/16 1-1/2 

2 Hd Sh 5 5-1/4 15/16 2 

2 Hd Ptd 4-5/8 5-3/4 7/8 1-1/4 

2 Hd Ptd Sh 4-5/8 5 7/8 2 

3 Fr 5-5/8 6 15/16 1-5/8 

3 Fr Sh 5-5/8 5-5/8 15/16 2-3/8 

3 Hd 5-5/8 6 15/16 1-1/2 

3 Hd Sh 5-5/8 5-1/2 15/16 2 

4 Fr 6-1/8 6-3/4 1 1/16 1-1/2 

4 Hd 5-3/4 6-3/4 1 1/4 2 

4 Hd Sh 5-3/4 6-1/2 1 1/4 2-1/4 

5 Fr 6-7/8 6-7/8 1 1/4 2-5/8 

5 Hd 7 6-15/16 1 1/4 2-1/2 

5 Hd Th 6-3/4 7 1 1-1/4 

6 Fr 6-15/16 7-1/2 1-1/4 1-1/4 

6 Hd 7-1/8 7-1/2 1-1/4 3 

7 Fr 7-7/8 7-7/8 1-1/4 2-7/8 

7 Fr Sh 7-3/4 7-1/2 1-1/4 3-1/16 

7 Fr Nrw 7-1/2 8 1-1/4 1-7/8 

7 Fr Nrw Sh 7-1/2 7-9/16 1-1/4 2-1/4 

7 Hd 7-1/8 8 1-1/4 2-1/2 

8 Fr 8-5/8 8-1/4 1-1/4 3-1/2 

9 Fr 8-5/8 8-5/8 1-1/4 2-7/16

HORSESHOES ALUMINUM 

Therapeutic 


The Natural Balance Shoe addresses the biomechanical 

needs of the equine foot for support and protection which 

offers the horse the most natural foundation for optimal 

performance with minimal stress. This wide-web, rolled 

toe shoe offers maximum support to the hoof, and helps 

eliminate hoof capsule distortion. The toe area on the 

foot side is seated out to eliminate sole contact beneath 

the tip of P3, and the toe portion is reinforced, offering 

greater mass, which means more material for wear. 

There is no wear plate in the shoe, therefore the toe can 

wear back as the foot grows in length, allowing the foot 

to stay in “Natural Balance” for a longer period of time 

until the reset. Made of a forged aluminum alloy that is 

heat treated for added hardness. Available in fronts only. 


Item # U/M 

4NB00 NB, 2x0 PR 

4NBS0 NB, 0 PR 





Denoix Series *ALL ARE SPECIAL ORDER 

The following aluminum shoes were designed by Jean- 

Marie Denoix, DVM, PhD. They are used for corrective 

purposes and therefore are sold individually. 

Denoix Collateral Front 

This is an asymmetric aluminum machined shoe. It features 

a wide branch to provide support under collateral or 

suspensory ligament injuries and a narrow branch to 

reduce pressure under subchondral bone lesions. Two 

styles: A: Lateral left front shoe or a medial right front 

shoe and B: Medial left front shoe or a lateral right front 

shoe. Shoes sold individually. 

Item # U/M 

JMDCFA-5 Denoix Collateral A, Fr #5, 2x0 EA 

JMDCFA-6 Denoix Collateral A, Fr #6, 0 EA 





JMDCFB-5 Denoix Collateral B, Fr #5, 2x0 EA 

JMDCFB-6 Denoix Collateral B, Fr #6, 0 EA 





Denoix Collateral Hind 

This is an asymmetric aluminum machined shoe. It features 

a wide branch to provide support under collateral ligament 

injuries and a narrow branch to reduce pressure under 

subchondral bone lesions (i.e. bone spavin). Two styles: A: 

Lateral left hind or medial right hind shoe and B: Medial left 

hind shoe or the lateral right hind shoe. Shoes sold individually. 

Item # U/M 

JMDCHA-5 Denoix Collateral A, Hd #5, 2x0 EA 

JMDCHA-6 Denoix Collateral A, Hd #6, 0 EA 





JMDCHB-5 Denoix Collateral B, Hd #5, 2x0 EA 

JMDCHB-6 Denoix Collateral B, Hd #6, 0 EA 





EDSS Natural 

Balance 

EDSS Natural 

Balance PLR 

Denoix Collateral 

A Front 


B Front 


A Hind 


B Hind 

Natural Balance PLR 

The NB PLR is the next generation in aluminum performance 

foot wear for horses. Because horses were not particularly 

designed to turn and run in tight circles, the joints in the 

lower limb, especially the coffin joint takes a beating, 

decreasing the soundness & performance of the horse 

rapidly decreasing. Reducing the leverage to the joint by 

bringing the breakover point of a shoe to a closer proximity 

to the tip of P3 has proven to be extremely beneficial as at 

treatment protocol. The simple fact is that horses that are 

free of pain with a reduction in the amount of effort it takes 

to move will perform better and stay sounder longer. That 

is what the NB PLR offers the performance horse. 


Item # U/M 

NBPLR-F20 NB, PLR, 2x0 PR 

NBPLR-F0 NB, PLR, 0 PR 





NBPLR-W20 NB, PLR Wedge, 2x0 PR 

NBPLR-W0 NB, PLR Wedge, 0 PR 





Denoix Suspensory 

Front 

Denoix 

Suspensory Hind 

Denoix 

Reverse 

Denoix Suspensory Front 

Shoe features a wide toe, narrow branches and short 

heels to increase fetlock support with the deep digital 

flexor tendon. Shoes sold individually. 

Item # U/M 

JMDSF-5 Denoix Suspensory, Fr #5, 2x0 EA 

JMDSF-6 Denoix Suspensory, Fr #6, 0 EA 





Denoix Suspensory Hind, Clipped 

The hind version shoe features side clips with a wide toe, 

narrow branches and short heels to increase fetlock support 

with the deep digital flexor tendon. Shoes sold individually. 

Item # U/M 

JMDSHC-5 Denoix Suspensory, H/C #5, 2x0 EA 

JMDSHC-6 Denoix Suspensory, H/C #6, 0 EA 





Denoix Reverse Front 

Shoe provides optimal heel support with an open toe and 

rolling over the dorsocollateral aspects of the foot. 

Indications: Clinical manifestations of navicular disease; 

deep digital flexor tendinopathies or distal check ligament 

desmopathies. Shoes sold individually. 

Item # U/M 

JMDRF-5 Denoix Reverse, Fr #5, 2x0 EA 

JMDRF-6 Denoix Reverse, Fr #6, 0 EA 






Wide Web 

KB WEDGE 

KB Horseshoes take on the traditional horseshoe. Light 

and durable with a two-degree graduation, this shoe 

adds an excellent base of support. The two-degree 

shoe is made from the same user-friendly aluminum 

alloy as all KB shoes, extending the life of the shoe for 

active horses. This true ”sporthorse” shoe has a wide-web 

“rolled-toe” features, which provide greater stability and ease 

of breakover. 

Item # U/M 

GEOHW00 2-Degree Wedge, 2x0 PR 

GEOHW0 2-Degree Wedge, 0 PR 



St. Croix Eventer - Clipped 

The St. Croix is punched CH. Packaged in 10 pair boxes. 

Item # U/M 

SC19841 Eventer Front, QC, 2x0 PR 

SC19842 Eventer Front, QC, 0 PR 





SC19941 Eventer Hind, QC, 2x0 PR 

SC19942 Eventer Hind, QC, 0 PR 




Victory Elite 

The Victory Elite is a lightweight wide web aluminum 

competition shoe. It has sure-footed traction, rugged 

durability and flat heels; can be drilled and tapped for 

studs. 

Item # U/M 

010 Elite X-Small, 2x0 PR 

012 Elite Small, 0 PR 

013 Elite Small Plus, 0.5 PR 

014 Elite Medium, 1 PR 

015 Elite Medium Plus, 1.5 PR 

016 Elite Large, 2 PR 

018 Elite X-Large, 3 PR 



GE 2-Degree 


Hind 



Victory Elite Flat 

Victory Elite 

2-Degree 

See pages 30 - 36 for the tools of the farrier; 

Hammers, pages 45 & 46 

Fire and Farrier Tongs, pages 56 & 57 

Farrier Aprons, pages 28 & 29 

Kerckhaert Triumph (Fronts Only) 

The Kerckhaert Triumph is a dropped forge shoe with 

built-in sole relief. This shoe was designed with a toe 

shape that is more natural. The branches are less 

round, providing a quicker fit for the narrower foot. It 

features six nail holes in each branch offering excellent 

nail placement choices. This shoe offers a slight taper 

from toe to heel to suit a more traditional shoeing style. 

The shoes have a taper in the heel minimizes the finish 

work in that area. Packaged in 15 pair boxes. 

Item # U/M 

30TAF Triumph Front, 3x0 PR 

20TAF Triumph Front, 2x0 PR 

0TAF Triumph Front, 0 PR 

1TAF Triumph Front, 1 PR 

2TAF Triumph Front, 2 *S/O PR 

3TAF Triumph Front, 3 *S/O PR 


Kerckhaert Front 

Triumph SC 

Kerckhaert Triumph, Side Clipped 

The Kerckhaert Triumph is a dropped forge shoe with 

built-in sole relief. Packaged in 15 pair boxes. 

Item # U/M 

30TAFC Triumph Front, SC, 3x0 PR 

20TAFC Triumph Front, SC, 2x0 PR 

0TAFC Triumph Front, SC, 0 PR 




Wedged - Victory Elite 

The Victory Elite 2-degree Wedge provides firm heel 

support and assists in faster breakover. 

Item # U/M 

020 Elite 2-Degree Wedge, X-Small, 2x0 PR 

022 Elite 2-Degree Wedge, Small, 0 PR 

023 Elite 2-Degree Wedge, Small Plus, 0.5 PR 

024 Elite 2-Degree Wedge, Medium, 1 PR 

025 Elite 2-Degree Wedge, Medium Plus, 1.5 PR 

026 Elite 2-Degree Wedge, Large, 2 PR 

We have designed the ultimate hoof knife with a comfortable long narrow or shorter and wider redwood 

handle. “The Bonnie TM 

" fulfills the farrier’s needs at a bladesmith’s standard. “The Bonnie TM 

" knives have 

a deep curve to aid in cleaning out the frog. Has a tight hook at the blade’s end. Accomplished farriers like 

"The Bonnie TM 

" for its long lasting sharpness of the stainless steel blade. With frequent use and proper care 

"The Bonnie TM 

" should last for one year before replacement. (Page 30) 

Pieh Tool rebuilds nippers. 

We have a fast turnaround! 

the BonnieTM knives 



Racing Plates 

Thoro’Bred Regular Toe 

The Regular Toe is the most popular style racing plate 

in use. An excellent all around performer. Thoro’Bred 

racing plates are made from prime aluminum aircraftgrade, 

quality guaranteed. No secondary materials 

are used. Racing plates and shoes are hot forged 

and heat-treated. The Front have a crease around the 

entire shoe, and the hinds have flat heels. 

Item # U/M 

1RTF3* Front, 3 *S/O SET 

1RTF4 Front, 4 SET 




1RTF8* Front, 8 *S/O SET 

1RPH3* Hind, Plain Heels, 3 *S/O SET 

1RPH4 Hind, Plain Heels, 4 SET 




1RPH8* Hind, Plain Heels, 8 *S/O SET 


Egg Bar 

KB 

Made from the finest aircraft-quality aluminum alloy 

available. Designed for hunter jumpers but can be used 

in many applications. Modifications such as clips, drilling 

and tapping for studs or protection plates, and welded-on 

accessories area easy with KB shoes. 

Item # U/M 

GEKB00 Egg Bar, 2x0 PR 

GEKB0 Egg Bar, 0 PR 





KB Wedged 

Machined to a precision 3-degree graduation from heel 

to toe. Excellent where heel elevation is recommended. 

Item # U/M 

GEKBW00 Wedged Egg Bar, 2x0 PR 

GEKBW0 Wedged Egg Bar, 0 PR 





Thoro’Bred Front 

Regular 

Thoro’Bred Hind 

Regular 

Set = 4 shoes 

GE Egg Bar 

GE Wedged Egg Bar 

We now offer LMF Horse Feeds. They 

are available for pick up. Call if 

interested in shipping options. 

All are listed on our website. 

Thoro’Bred Queens 

Thoro'Bred Queens Aluminum Racing Plates are for 

tracks that do not allow inserts, calks or toe grabs that 

protrude above the plate. This shoe reduces tendon 

strain and muscle pulls. 

Item # U/M 

1QPF3 Queens Plate Front, 3 SET 





1QPF8 Queens Plate Front, 8 *S/O SET 

1QPH3 Queens Plate Hind, 3 SET 





1QPH8 Queens Plate Hind, 8 *S/O SET 

Thoro’Bred 

Queens Front 

Thoro’Bred 

Queens Hind 

KB Navicular 

GE Navicular Egg Bar 

Designed to relieve stress in the critical navicular 

coffin joint area and other symptomatic areas. It is 

easily applied. Shoe can be shaped either hot or cold. 

Modifications such as clips, drilling and tapping for 

studs or protection plates, and welded-on accessories 

area easy with KB shoes. 

Item # U/M 

GEKBN00 Navicular Egg Bar, 2x0 PR 

GEKBN0 Navicular Egg Bar, 0 PR 






HOOF STANDS, SHOEING BOXES 

Hoof Stands - Adjustable 

Item # Ship Wt. 

CCDSTAND Cliff Carroll, Disc Style 10.00 lb 

Aluminum with cradle/caddy 

CCLSTAND Cliff Carroll, Leg Style 10.00 lb 

Aluminum with cradle/caddy 

CCR Cliff Carroll Replacement Cradle 1.00 lb 

for Leg Style & Disc Style Hoof Stands 

HJHST-R Hoof Jack, Standard 14.00 lb 

Plastic with Cradle/Post (incl. 2 magnets) 

HJHST-M Hoof Jack, Mini 6.00 lb 

Plastic with Cradle/Post (incl. 2 magnets) 

HJHST-C Hoof Jack, Combo-Draft 21.00 lb 

Plastic with Draft/Std Cradle/Post (incl. 2 magnets) 

HJDC Hoof Jack Draft Cradle Only 2.00 lb 

0241 NC Adjustable Hoof Stand w/Caddy 

Finally the hoof stand you’ve always wanted. Adjustable height to reduce 

stress to your back and legs while dressing hooves and nailing shoes. 

Includes a useful tool caddy. 

HI.HSD Hoof-it® Draft Hoof Stand 

HI.HSS Hoof-it® Standard Hoof Stand 

The Hoof-it® Hoof Stand, designed by farrier Steve Samet, features a new 

modern design which integrates the post and cradle to create a “two-in-one” 

unit. This design allows the user to switch from the hoof cradle to hoof post 

in one easy step. The cradle and post are covered with a shock-absorbing 

rubber material that provides a comfortable support for the horse, while the 

wide base unit provides added stability and safety for the user. 

Shoeing Boxes 

Yoder Shorty 

Shoeing Box 

Yoder Cricket 

Shoeing Box 

Yoder Deluxe 

Shoeing Box 

Yoder Classic 

Shoeing Box 

Yoder 


YSSB Yoder Shorty Shoeing Box 14.00 lb 

The Yoder Shorty is small and compact! It offers 2 rasp holders 

with 3” casters. A perfect sized starter box. 27” High 

YCSB Yoder Cricket Shoeing Box 15.00 lb 

The Yoder Cricket Farrier tool box is light, compact and portable 

offering two vinyl covered shelves. 27” High 

YDSB Yoder Deluxe Shoeing Box 16.00 lb 

A light weight, compact toolbox boasting two solid PVC tool holders 

on the side capable of holding six tools heads up. 32” High 

YLSB Yoder Classic Shoeing Box 18.00 lb 

The Yoder Classic includes three aluminum vinyl covered tool shelves 

along with a top nail tray and tool hanger. 32” High 

NC 


NCSBT.2 NC Tall Shoeing Box 16.00 lb 

The NC Tall Shoeing Box features: 2 Nail compartments, A large rubber 

lined tool tray, 2 rasp holsters, A knife holster and Castered legs. 

NC Tall Shoeing Box 

Save 

Your BACK 

and use a 

Hoof Stand! 

NC 

Adjustable 

Hoof Stand 

w/Caddy 

Cliff Carroll 

Disc Style 

Hoof Stand 

Hoof Jacks 

Cliff Carroll 

Leg Style 

Hoof Stand 

Draft Standard Mini 

Thoro’bred Shoeing 

Box, Small 

Hoof-it® 

Hoof Stand 

Thoro’bred *SPECIAL ORDER ITEMS 


6SHS Thoro’bred Shoeing Box, Small 5.75 lb 

This is a basic style shoeing box by Thoro’bred. Ideal for use as a 

trimming box or apprentice farrier’s shoeing box. Lightweight. 

Length: 13”, Width: 8”. Height: 10 inches. 

6SHL Thoro’bred Shoeing Box, Large 9.50 lb 

Works well for the pleasure horse farrier that needs more space for a 

large amount of tools. This box is simple and without wheels. It has 

a top storage compartment as well as a handy bottom shelf that lifts 

up for added storage. There are two vertical slots perfect for holding 

rasps and files, and a receipt book. The back side features 2 knife 

pockets. Length: 14”, Width: 12”, Height: 12”. 

6SH90 Thoro’bred Shoeing Box, Model 90 7.25 lb 

Designed for the professional farrier. Has two tiered thick sidewall 

construction with divided nail and shoe trays. Same as the Plater’s Special 

shoeing box but with the addition of four swivel wheels and two molded 

Neoprene knife pockets. Features a rasp divider and removable tool tray 

for easy cleaning. Length: 15”, Width: 9-1/4”, Height” 9-1/2”. 

Thoro’bred Shoeing Box, Large 

Thoro’bred Shoeing 

Box, Model 90 


HORSE BOOTS, VET WRAP 

Easyboots 

Easyboot Glove 

A Revolutionary Hoof Boot Design. This form-fitting, seamless 

boot hugs the hoof and responds like a natural foot. Flexible and 

tough, Glove and Glove Wide have an aggressive tread pattern 

and still allow free stride and breakover. Fits Like a Glove. Like 

a glove, this boot provides protection without stifling mobility. The 

Easyboot Glove material stretches over the hoof and clings to the 

hoof wall so debris stays out of the boot, even in sandy or muddy 

conditions. There is no external hardware so there is no need 

to worry about replacing cables or buckles. Studs are available 

separately for winter riding. The Glove must be carefully sized 

and fitted to the hoof. If you believe you measured correctly, but 

the boot does not fit tightly, try a smaller size. A Fit Kit will ensure 

getting the right size and model of Glove. 

Item # U/M 

EBDGL-00 Easyboot Glove, 00 EA 

EBDGL-00.5 Easyboot Glove, 00.5 EA 










Vet-Wrap Bandaging Tape 

3M 

Available in 4 inch x 5 yard and in a variety of colors. Veterinarians, animal 

trainers and animal owners need and expect the best in their animal 

care products. 3M Vet-Wrap Bandaging Tape has been meeting that call 

since 1968. It’s the world’s first and leading brand of flexible self-adherent 

wrap for the support and protection of all animals-great and small. 

In its class, 3M Vet-Wrap brand has become known around the world as 

the preferred bandaging tape. From racetracks to small animal clinics, 

you can hear the 3M Vet-Wrap bandage name declared the standardbearer 

of self-adherent wrap. The reasons are simple: first-place quality, 

first-place value. Vets, trainers and field laboratory research consistently 

rate 3M Vet-Wrap bandaging tape as the most adherent self-adhesive 

wrap on the market, providing support, protection and security. 

• Adheres to itself without adhesive or fasteners 

• Conforms snugly around contours 

• Accommodates movement without loosening 

• Won’t stick to hair 

• Allows skin to breathe through its cool, light weight, porous material 

• Absorbs virtually no moisture 

• Cuts away with scissors without unwrapping 


Pieh Tool Company 

Gift Certificates 


We have found that measurements are 

more accurate and easier to take using the 

metric system. 

Size Width in mm Length in mm 

00 96-99mm 106-109mm 

00.5 100-103mm 110-113mm 

0 104-107mm 114-117mm 

0.5 108-111mm 118-121mm 

1 112-115mm 122-125mm 

1.5 116-119mm 126-129mm 

2 120-123mm 130-133mm 

2.5 124-127mm 134-137mm 

3 128-131mm 138-141mm 

3.5 132-135mm 142-145mm 

4 136-139mm 146-149mm 

Applications: 

• Protects horses’ legs from rundown 

• Firmly supports sprains and fractures 

• Protects wounds and holds sterile dressings in place 

• Applies pressure to inhibit bleeding & won’t compromise circulation 

Item # U/M 

VW4WBL 3M Vet-Wrap, Blue EA 

VW4WPK 3M Vet-Wrap, Pink EA 

VW4WBK 3M Vet-Wrap, Black EA 

VW4WPR 3M Vet-Wrap, Purple EA 

VW4WGR 3M Vet-Wrap, Green EA 

VW4WRD 3M Vet-Wrap, Red EA 

VW4WOR 3M Vet-Wrap, Orange EA 

VW4WWT 3M Vet-Wrap, White EA 

E-mail, fax or call for fast service 

www.piehtoolco.com � Fax 928-554-0800 � Phone 1-928-554-0700. 

We customize each certificate specifically for you. 


Bar Wedge Pads 

Castle 

Black Plastic 

Item # U/M 

C1BWP 1 Bar Wedge PR 




Bar Wedge Pad Specifications 

Size Length Width Heel Height Toe 

#1 4-1/4” 5-3/4” 1/4” 1/16” 

#2 5-1/2” 6” 3/8” 1/16” 

#3 6-1/2” 6-1/4” 1/2” 1/32” 

#4 7-3/8” 5-3/4” 7/16” 1/32” 

Castle Bar Wedge Frog 

Bar Wedge Frog Pad 

This pad is just like the regular bar wedge above, but with 

an added frog support. 

Item # U/M 

C1BWF Size 1: 1/4" at heel PR 



Degree Pads 

Degree Wedge 

Castle 

Black Urethane 

Degree Jumbo 

Item # U/M 

C1DWUP 1-Degree Wedge 

3/16” at heel (5-7/8x6-7/8) 

PR 

C2DWUP 2-Degree Wedge 

7/32” at heel (6-3/4x6-5/8) 

PR 

Black Plastic 

C2DWP 2-Degree Wedge 

7/32” at heel (6-3/4x6-5/8) 

PR 

C2DJP Castle 2-Degree Jumbo 

5/16” at heel (7-5/8x7-1/4) 

PR 

C3DJP Castle 3-Degree Jumbo 

7/16” at heel (7-5/8x7-1/4) 

PR 

Rim Pads 

Small 

All Castle Small Rim Pads are 5x5-1/4. 

Item # U/M 

CRP Castle Rim Plastic-Black, 1/8” PR 

CRF Castle Rim Felt-Grey, 1/8” PR 

CRR Castle Rim Rubber-Black, 1/8” PR 

CRTU Castle Rim Urethane-Tan, 1/8” PR 

C10RP Hoofprints #10 Rim Impak-Green, 3/16” PR 

WEDGE, RIM HOOF PADS 

Castle 1 Bar Wedge 



Curtis Hamilton Full Wedge 

1-Degee 3-Degee 

2-Degree Oval Pad 

3-Degree Oval Pad 

Hoofprints Degree Oval 

Castle 

Rim 

Hoofprints #10 Rim 

2 Full Wedge 

3 Full Wedge 

Full Wedge Pads 

Castle 

Black Urethane 

4 Full Wedge 

Item # U/M 

C2FWUP 2 Full Wedge, 5/16” at heel (5x6-5/16) PR 

C3FWUP 3 Full Wedge, 1/2” at heel (6-1/2x6-1/4) PR 

C4FWUP 4 Full Wedge, 3/4” at heel (7-1/2x6) PR 

Black Plastic 

C2FWP 2 Full Wedge, 5/16” at heel (5x6-5/16) PR 

C3FWP 3 Full Wedge, 1/2” at heel (6-1/2x6-1/4) PR 

C4FWP 4 Full Wedge, 3/4” at heel (7-1/2x6) PR 

Bar and Full Wedge Pads 

Castle Plastics has introduced most of the successful pads in the past 

decades. Guided by farriers worldwide, today these pads are used 

extensively every day. Made in the USA from virgin polyurethane material. 

Hoof Prints pads are called IMPAK, another product from Castle. 

Curtis Hamilton 

Curtis Hamilton full wedge pads are made of vinyl. 

Item # U/M 

CH2WL 2-Degree Wedge, Long PR 

CH3W 3-Degree Wedge PR 

Oval Degree Pads 

Castle 

Black Plastic 

Item # U/M 

C1DO 1-Degree Oval PR 

3/16” at heel (5-7/8x6-7/8) 

C2DOP 2-Degree Oval PR 

7/32” at heel (5-7/8x6-3/4) 

C3DOP 3-Degree Oval PR 

7/16” at heel (5-7/8x6-3/4) 

Hoofprints 

Impak, Green 

C112DP #11, 2-Degree Oval PR 

5/16” at heel (7-1/8x5-1/8) 

C153DP #15, 3-Degree Oval PR 

7/16” at heel (7-1/8x5-7/8) 

Rim, Large 

Large 

Item # U/M 

CLR Castle Rim Plastic-Black, 1/8” (6-3/4x6) PR 

CILRP Hoofprints Rim Impak-Green, 1/8” (6-3/4x6) PR 


FLAT, DRAFT & LEATHER HOOF PADS 

Flat Pads 

Castle 

Castle 

Thinliner 

Plastic, Black 

Castle #4 Flat 

Designed to assist the farrier in promoting heel growth 

and soundness. With the exception of the cushion frog 

pads, performance pads, and the frog support kits, all 

other pads will be used with support portion towards the 

ground surface. 

Item # U/M 

CTB Thinliner Black, 1/16” (5-3/4x6-3/8) PR 

CTC Thinliner Clear, 1/16” (5-3/4x6-3/8) PR 

C4BF #4 Black, 1/8” (5-3/4x6-3/8) PR 

C4CFP #4 Clear, 1/8” (5-3/4x6-3/8) PR 

C5FP #5 Black, 1/8” (7-7/8x7-1/4) PR 

C6FP #6 Black, 3/16“ (7-3/16x7-1/2) PR 

Farriers Pride 

Plastic, Clear 

Made from polyethylene. 

Item # U/M 

FP1 #1 Clear, 3/32” (5-7/8x6-1/4) PR 

FP2 #2 Clear, 1/8” (6x6-1/4) PR 

Draft/Arab Pads 

Castle 

Plastic, Black 

Castle Arab 

Item # U/M 

CDBFP Draft, 5/16” (9-7/8x9-3/4) PR 

CAFP Arab, 3/8” (6-7/8x6-1/8) PR 

Anvil Brand 

Item # U/M 

ABDS Draft, Small 5/16” (9x8) *S/O PR 

ABDS-W Draft Wedge, Small 1/2” (9-3/4x9) *S/O PR 

Pad Cutter 

Shape the shoe to fit, place the shoe on the pad and mark 

an outline of the shoe, then turn the handle of the Duval 

Pad Cutter as you feed the pad material into the cutter. 

The blades of the Duval Pad Cutter are tempered steel 

and make it easy to cut pads quickly, accurately, and with 

less effort and stress on your body. The pad cutter mounts 

using a bracket with pre-tapped holes. The bracket then 

fits into a hardy hole for easy access (7/8” & 1”) or can be 

mounted permanently to a bench or truck without using the 

bracket. Housing made from cast aluminum. 

Item # U/M 

DPC Duval Pad Cutter *S/O EA 

DPBC Blade Cover *S/O EA 

DPCBB Replacement Blades-Bottom *S/O EA 

DPCBT Replacement Blades-Top *S/O EA 

DPCH Replacement Handle *S/O EA 


Castle Draft 



Farriers Pride 

Anvil Brand Draft 

Anvil Brand 

Draft Wedge 

Hoofprints 

Flat 

Hoofprints 

Hunters, jumpers, thoroughbreds, trotters, pacers and 

polo ponies have all benefited from this shock absorbing 

material (IMPAK). Manufactured from a special blend of 

polymers, these pads not only absorb shock, but also 

stand up well and are able to be reset. These pads have 

also been used effectively for foal extensions, flat soles, 

pedel osteitis, and hospital plates. More information is 

available from us about these pads and their uses. 

Item # U/M 

C4MFP #4 Impak Green, 3/16” (6-3/8x5-3/4) PR 

C5LFP #5 Impak Green, 3/16” (7-1/4x6-5/8) PR 

Keystone Leather 

Pads 

Leather Pads 

Leather conforms to the hoof for a custom fit. Foreign 

materials are less likely to become trapped between the 

pad and the sole. It “breathes” - the hoof sweats less 

- and the opportunity for thrush to incubate decreases. 

It allows moisture to penetrate evenly and naturally 

yet not become trapped. Leather is disposable and 

biodegradable. 

Item # U/M 

KL4R Keystone Leather Pad #4, Regular PR 

KL4H Keystone Leather Pad #4, Heavy PR 

KL4XH Keystone Leather Pad #4, Extra Heavy PR 

KL6R Keystone Leather Pad #6, Regular PR 

KL6H Keystone Leather Pad #6, Heavy PR 

KL6XH Keystone Leather Pad #6, Extra Heavy PR 

Replacement Handle 

Replacement 

Blades 

Top or Bottom 

Duval Pad Cutter 


Cushion Heel Pads 

Item # U/M 

CCH Castle Cushion Heel Black, 7/16” PR 

(5-1/2x5-3/4”) 

Pour (Screen) Pads 

Used with hoof packing, such as Equi-Build. Also 

allows foot to breathe & leaves access for medications. 

Item # U/M 

CPP Castle 4 Pour Pad Black, 1/8” PR 

(5-3/4x6-3/8) 

Egg Bar Frog Pads 

Myron McLane 


The Myron McLane Full Support pad supports the 

bony column of the hoof, distributing weight from 

the hoof wall to the frog. The release of pressure 

increases the blood supply to the hoof wall area. 

Item # U/M 

MMPS Full Support Pad Small PR 

MMPM Full Support Pad Medium PR 

MMPL Full Support Pad Large PR 

Castle 


CEB Egg Bar, 1/8” (6x6-1/2) PR 

CEBL Egg Bar Large, 1/8” (8x7-1/2) PR 

C2EBS 2-Degree Egg Bar, 1/8” (6x6-1/2) PR 

Frog Pads 

Castle 


The cushion frog pads may be used for both frog 

pressure or heel support. Using the cushion frog 

pads and the egg bar pads at ground surface, it 

will sometimes eliminate the need for a heart bar 

shoe. This promotes frog pressure with Hoof Prints 

Silicone or other hoof packing materials. 

Item # U/M 

CCFS Cushion Frog Small, 1/8” 

(6-1/2x5-7/8) 

PR 

CCFL Cushion Frog Large, 1/8” 

(8x7-1/2) 

PR 

C2DCF 2-Degree Cushion Frog Small, 5/16” 

(6-1/2x5-7/8) 

PR 

Hoofprints 

Plastic, Green 

CICFP Cushion Frog Small, 1/8” 

(6-1/2x5-7/8) 

PR 

Thera Flex Pads 

Treats the following conditions: 

Laminitis, Contracted heels and Founder. 

Item # U/M 

TFP1 Thera Flex Pad #1 PR 




EGG BAR, FROG PADS, SPRINGS 

Myron McLane 

Full Support 

Castle Egg Bar 

Castle Cushion Frog 

Castle 

Cushion 

Heel 

Castle Pour 

(Screen) 

Pad 

Hoofprints Cushion Frog 

Thera Flex 

Impak 

Bar 

Bar Pads 

Hoofprints Impak, Green 

Item # U/M 

C1SBP #1 Bar, 3/16” (5-3/16x4-13/16) PR 

C2MBP #2 Bar, 3/16” (5-9/15x5-3/8) PR 

C8IAP #8 Absorber, 3/16” (5-1/8x4-3/4) *S/O PR 

C8LIAP #8L Absorber ,3/16” (6-5/8x6)*S/O PR 

The frog is cushioned. 


#12 2-Degree 

Open Wedge 

Natural Balance Frog 

Impak 

Absorber 

Egg Bar Wedge Pads 

Hoofprints 

Impak, Green 

Item # U/M 

C122DOWP 2-Degree Open Wedge #12 PR 

5/16” (7-5/8x6-3/8) 


Urethane, Clear 

The Natural Balance Frog Pad is a durable, opaque 

Urethane rigidity. There is a “crystal clear” window 

above frog to aid in alignment, the frog heel is 

recessed-addresses contracted heels, and the pad has 

a self-cleaning tapered frog. The Natural Balance Pad 

can be used with or without Impression Material. 

Indicators for Use of the Natural Balance Pad: 

• Contracted Heels Weak, Narrow Frog 

• Poor Quality Frog Toe-First Landing 

• Navicular-Like Problems Minor Lameness Problems 

• Negative P3 Angle Caudal Heel Pain 

Item # U/M 

NBPF-R Frog Pad Flat (000-1) PR 

NBPF-L Frog Pad Flat Large (2-6) PR 

NBPW-R Frog Pad Wedge (000-1) PR 

NBPW-L Frog Pad Wedge Large (2-6) PR 

Heel 

Spring 

Heel Springs 

Heel springs used for contracted heels-use under pad. 

Item # U/M 

HSS Heel Spring Small EA 

HSM Heel Spring Medium EA 

HSL Heel Spring Large EA 


SNOW, THERAPEUTIC, HOSPITAL PADS 

Snow Pads 

To ensure safe riding in winter months, we offer a 

wide assortment of Snow Pads. Resilient in sub-zero 

conditions and resists barnyard acids. The convex ball 

in the center of the pad rejects packing of snow and 

ice (or snowballing) and promotes safer footing. These 

pads work well with shoes with low calks or borium. 

The Rim style is great for dealing with icy situations! 

Snowball pads can be used all year around. Many 

farriers fine them useful in muddy situations. Instead of 

snow, the ball pops out the mud. 

Flat, Plastic/Rubber-Black 

Item # U/M 

CSR Castle Sno Ball, 1/8” PR 

CSL Castle Sno Ball, Large, 3/16” PR 

CDS Castle Sno Ball, Draft, 1/4” PR 

Castle Sno Ball Pad Information 

Item # Size Length Width Ball Height 

CSR 00-3 6” 6-1/2” 7/16” 

CSL 4+ 8” 7-3/4” 9/16” 

CDS Draft 9-5/8” 9-3/4” 5/8” 

C2DS 00-3 5-7/8” 6-1/2” 7/16” 

C2DLS 4+ 7-1/2” 8” 9/16” 

Therapeutic Pads 

Castle 

Performance 

Performance Pads are designed for the ultimate 

in sole protection. These pads have also been 

used effectively for foal extensions, flat soles, 

pedal osteitis and hospital plates. 

Item # U/M 

C4P #4 Performance, 3/16” PR 

C4.25P #4 Performance, 1/4” PR 

C5P #5 Performance, 3/16“ PR 

Lily Pads 

This unique product was designed and developed 

by Dr. Ric Redden as an emergency support aid 

for various foot ailments. Taping this product to the 

frog of most feet offers the painful foot a resilient 

cushion support as well as protection, slight heel 

elevation and the benefit of slightly reduced breakover. 

The Lily Pad placed on heavy, full frogs often 

reduces heel contact with the ground, a very helpful 

aid for acutely bruised heels and corns. Stall rest 

is then suggested for a few days, or until the acute 

inflammation has resolved. The Lily Pad can be 

a useful aid for chronic laminitis provided palmar 

angle is less than 5 degrees. 

Item # U/M 

LILYP Lily Pads PR 

Magnetic Pads 

Magnetic Pads are an effective and drug free 

treatment for the diseases of the hoof. They are 

used to treat navicular disease, pedal osteitis, 

laminitis, poor hoof growth, and stress fractures 

of the coffin bone. Apply these pads as you would 

apply any other pad. 

Item # U/M 

CMP Castle Magnetic Pad, 1/8” PR 

(5-3/4x6-3/8”) 

Castle Performance 

Styrofoam Support Pad 

Castle 

Magnetic 

Pad 

Sno Rim 

Front 

Sno Rim 

Front 

Lily Pads 

Castle Sno Ball Regular 

Sno Rim 

Hind 

Sno Rim 

Hind 

Castle 

Hospital Pad 

Components 

Castle Sno Ball Draft 

Degree, Plastic/Rubber-Black 

Item # U/M 

C2DS Castle Sno Ball, 2-Degree, 3/8” PR 

C2DLS Castle Sno Ball, 2-Degree, Large, 1/4” PR 

Rim, Urethane 

CSRCF Castle Sno Rim Front-Clear (00-1) PR 

(5-1/4x6-1/4) 

CSRCH Castle Sno Rim Hind-Clear (00-1) PR 

(5-1/4x6) 

CSRBF Castle Sno Rim Front-Black (1-2) PR 

(6x5-1/4) 

CSRBH Castle Sno Rim Hind-Black (1-2) PR 

(5-1/2x5-1/2) 

CSRLC Castle Sno Rim Front Large-Clear (2-3) PR 

(6-1/4x6-3/4) 

EDSS 

Styrofoam Support Pads 

The Styrofoam Pads are the most important tool we have 

found to treat horses in the acute stage of laminitis. They 

are pre-cut, hoof shaped pads or blocks of a very dense 2” 

piece of Styrofoam. The Styrofoam will compress into the 

caudal portion of the foot and offers the horse comfort and 

support through this critical stage of laminitis. Use of the 

Styrofoam will allow the horse to stabilize so that a more 

comprehensive diagnosis and treatment approach can be 

established. Set = 4 pads 

Item # U/M 

SF600-SM Styrofoam Support Pads, Small (00-0) Set 

SF601-MD Styrofoam Support Pads, Medium (1-2) Set 

SF602-LG Styrofoam Support Pads, Large (3) Set 

SF603-XL Styrofoam Support Pads, X-Large (4) Set 

Hospital Kits, Pads 

Castle Plastics has created a Hospital Pad that will 

speed the recovery of a hoof injury. You will now be 

able to care for the injury while protecting it, allowing 

the animal to be turned out and even ridden during 

the recovery period. The Hospital Pad is designed 

specifically for injury and rehabilitation. The pad has a 

removable plate for easy access to affected areas for 

quick cleaning and treatment. All you do is unscrew 

the removable plate to soak, clean, medicate, and care 

for the injury. Then just screw the plate back on, and 

the injury will be protected, speeding up the recovery 

process. 

Item # U/M 

CHPL Castle Hospital Pad, Large, 1/8” PR 

(6x7-1/2”) 

CHPS Castle Hospital Pad, Small, 1/8” PR 

(5-1/2x6-3/4”) 


ANTI-FUNGAL, CRACK & HOOF REPAIR 

Anti Fungal/Hoof Disease Remedies 

Item # 

WHLT Grand Circuit White Lightening Liquid, 8 oz 

WHLTG30 Grand Circuit White Lightening Gel, 30 ml syringe 

White Lightening is the "Silver Bullet" in the treatment of 

thrush, white line and hoof rot! When you activate it with 

equal amounts of white vinegar, it becomes very aggressive in 

stopping bacteria, fungus and yeast on contact. Safe on skin 

and hair. Bacterial growths such as rain rot on horse legs are 

eliminated with one application. Will not dry or irritate raw flesh. 

HPT Hawthorne Pine Tar, 16 oz 

Hawthorne Pine Tar is a natural antiseptic that fights bacterial 

and fungicidal infections. It is used as a hoof packing and 

dressing and is an excellent preventative hoof care. It helps in 

hoof elasticity and flexibility. It is effective in the treatment of 

split hooves, corns, quarter cracks and hard frogs. Also used in 

hoof packing. 

Crack and Hoof Repair 

Kwik Poly 

The RSP Kwik-Poly Medium Kit contains one 16 oz. Polyol 

component, one 16 oz. lsocyanate component, eight mixing cups, 

one pair of plastic gloves, and three applicators. 

Item # 

HRKP Kwik Poly, 16 oz 

Hoof Staple 

Hoof Staple: Keeping It Together. The first line of offense in fixing 

a hoof crack is to stabilize the hoof and coronet to encourage 

healthy new growth of the wall, we are taught. How to stabilize 

and how far down the hoof wall are important questions to 

consider. A new product called Hoof Staple gives alternatives and 

adjustibility in the treatment of cracks. Stainless steel “staples”, 

sometimes called “French clips”, are available in three sizes, and 

hold either side of the hoof wall in a desired position. 

Item # 

HS14 Hoof Staple, Small 

HS316 Hoof Staple, Medium 

HS516 Hoof Staple, Large 

Bond-N-Flex 

Bond-N-Flex is a revolutionary hoof repair and rebuild material, 

which is economical, quick and easy to use! Bond-N-Flex can be 

used to repair all types of hoof wall cracks and avulsions and to 

reconstruct low weak heels and thin walled hooves. It can be 

used to bond aluminum alloy, nylon, plastic or steel shoes to feet 

where nailing-on is limited or impossible, thus enabling horses 

with severe hoof problems to be comfortable for competition and 

leisure. 

Item # 

BFBL-40 Black, 40 ml 

BFBL-200 Black, 200 ml 

BFBG-40 Beige, 40 ml 

BFBG-200 Beige, 200 ml 

BFT-40 Mixing Tips, 40ml 

BFT-200 Mixing Tips, 200ml 

BFG-40 Mixing Gun, 40ml 

BFG-200 Mixing Gun, 200ml 

White Lightening Gel 

Kwik Poly 

Bond-N-Flex 

Mixing Tips 

Bond-N-Flex, 40ml 

White Lightening 

Liquid 

Bond-N-Flex Mixing Gun 

Hawthorne 

Pine Tar 

Hoof Staples 

Bond-N-Flex, 200ml 

Mustad 

Thrushbuster 

TB Mustad Thrushbuster, 2 oz 

Lasts for up to eight days without reapplication. A single 

application not only relieves the agonizing, crippling effects of 

thrush, but dramatically reduces the chances of reinfection. 

Unique purple color tells you where it is doing the job, with a 

fresh coat needed only where the color has faded. 


ADHESIVES, HOOF REPAIR 

Glue-On Shoe and Hoof Repair Adhesives 

Vettec Adhere and Accessories 

Item # 

46155 Adhere, Beige, 180cc 

46150 Adhere, Black, 180cc 

A fast-setting black or beige urethane adhesive designed to bond 

aluminum or steel shoes to the hoof and to fabricate hoof wall 

repairs. Glues on steel, aluminum and most plastic shoes as well as 

any hoof repair project. Sets hard with a superior bond, but maintains 

the flexibility necessary at the quarters and heels to allow the natural 

movement of the hoof. Initial set time is 1 minute and cure time is 

six minutes. Use with Vettec Dispensing Gun #46902 or #46908 and 

Vettec Mixing Tips #46901. 

46153 Adhere, Black, 50cc 

Convenient size comes with 2 tips and dispenser -- great for 

emergencies while out riding. 

46025 Adhesive Spacers (for glue on shoes) 

46020 Applicator Blades 

46906 Caps, for 180cc cartridges 

46901 Large Mixing Tips (for 180cc cartridges) 

46930 Small Mixing Tips (for 50cc cartridges) 

46902 180cc Dispensing Gun 

The gun is necessary for dispensing the 180cc. Vettec products. New 

users can get their first gun free when they buy 6 Vettec 180cc 

products. Special is only allowed once per customer. 

46908 180cc Premium Dispensing Gun 

With it’s heavy duty construction, the Premium Dispenser stands 

up to wear and tear making it perfect for daily use. The Premium 

Dispenser’s superior design mechanics allow for an “easy squeeze 

trigger” making all of Vettec’s products easier to dispense. 

46140 SuperFast, 180cc 

Now you can create a custom shoe in minutes. You won’t believe all 

the things you can do with this new, 30 second set, all-in-one hoof 

adhesive for farriers. Foal extensions attached in seconds, or custom 

made in minutes. Hoof repairs completed in minutes. 

46152 SuperFast, 50cc 

Convenient size comes with 2 tips and its own plug -- great for 

emergencies while out riding. 

Digital Thermometer 

Measure temperature on hoof abscesses, inflammations 

as well as hot metal in the range of -20 to 932°F. 

This non-contact thermometer gun measures the surface 

temperature. Use anywhere, it is fast and easy with the 

laser sighting, just point and shoot. 

Read the temperature in the digital display. 

5 

Year 

Warranty 

• User Configurative Hi/Low Alarm Settings 

• K-Type Thermocouple Input: Contact Temperature 

• Display: High Contrast, White on Black/Backlight 

• Durable: Rugged Over-Molding 

• Hold, Max Value Functions, Work Light 

• Slide Rail Mount: 2201 Voltage Detector 

See page 67 for further detail. 

Vettec Adhesive 

Spacers 

Vettec Adhere, 

50cc, Black 

Vettec 

Applicator 

Blades 

#46902 Vettec 

Dispensing Gun 

Vettec Adhere 

180cc 

Beige & Black 

Vettec Small & 

Large Mixing Tips 

22 1-888-743-4866 Pieh Tool Company, Inc. 

Vettec 

Large 

Caps 

#46908 Vettec Premium 

Dispensing Gun 

Note: All Vettec 180cc products are used with 

either Vettec Gun and Mixing Tips #46901. 

Laser Temperature Gun 

Item # 2266-20 

Special Free 

Gun Offer 

Vettec 

Superfast, 

50cc 

Vettec 

Superfast 

180cc 

See our product 

line of Electric and 

Cordless Power Tools 

Pages 63 - 70.

Vettec Hoof Packing 

Item # 

46160 Sole-Guard, 180cc 

Fast, effective protection and support for the unshod foot. Temporary 

protection for horses transitioning from shoes to barefoot. Fast and 

convenient - 30 second set time. Provides durable support while 

retaining flexibility indefinitely. Excellent for use during trail riding to 

provide protection, comfort and support. Great for providing support for 

heavy, late term brood mares. Bonds to the foot for up to three weeks! 

46121 Equi-Pak, 180cc 

Prevents sore feet or comforts a sore-footed horse. Sole and frog are left 

in great condition. Dispensed directly onto the sole and frog, Equi-Pak is a 

liquid urethane that sets in 25 seconds. Can be used with or without a pad. 

Provides support and protection for thin soled, flat footed horses. No hand 

mixing. Will not breakdown and is impervious to debris and moisture. 

46118 Vettec Equi-Pak Soft, 180cc 

Extra soft instant pad material for use under pads, clear in color and 

sets in 40 seconds -- for those “sensitive situations”. About 2X softer 

than regular Equi-Pak, stays soft (even in cold temperatures), strong 

bond to soles sealing out moisture and debris, (better than silicones). 

Use with pads on working horses, perfect for deep commissures and 

thin soles. Can be filled to ground level (w/o a pad) for lameness cases 

(with limited turnout) and absorbs shock and concussion. Use with the 

Vettec Dispensing Gun #46902 and Vettec Mixing Tips #46901. 

46122 Equi-Pak Copper Sulfate, 180cc 

This innovative new formulation combines Copper Sulfate with Equi-Pak 

to effectively treat most case of thrush, while providing the durable, shock 

absorbing support your customers have come to rely on with Equi-Pak. It 

adheres to the foot delivering Copper Sulfate to the sole and frog. Thrush 

can be covered in one easy application eliminating the need for horse 

owners pick out the fee and apply daily thrush medications! It cures in 

less than one minute, locks into place, and promotes a strong seal greatly 

reducing sand and debris migrations into the sole. Equi-Pak CS may also 

be used as a preventative measure before thrush even begins! It, like all 

other products, should not be used in the presence of bleeding or white 

necrotic tissue. Use with Vettec Dispensing Gun #46902 or #46908 and 

Vettec Mixing Tips #46901. 

46190 Sil-Pak, 180cc 

Silicone based product which totally fills and seals all void areas. Sets 

in 2 minutes. 

46126 Equi-Build Fast, 180cc 

Firm instant pad material (black). Distributes the weight across the entire 

hoof-bottom to grow heel, hoof wall, and sole. Adheres to the sole, sealing 

out moisture and debris. Stops heels from contracting. Use with Vettec 

Equi-Mesh #46030 and Vettec Foam Boards #46015. 

Impression Material 

Item # 

SSIM1.5 EDSS Sole Support Impression Material, 

Soft (Blue), 1.5 lb 

SSIM1.5P EDSS Sole Support Impression Material, 

Regular (Pink), 1.5 lb 

Cures to a rubber-like consistency. The blended material is placed 

in the bottom of the foot with a pad taped over it. A mold is made 

when the horse stands on the Impression Pad. After the material 

has cured it can be trimmed away from the sensitive areas and 

placed back in the foot under the shoe and pad. Support is transferred 

through the pad evenly to the frog, bars and sole. The soft 

blue material won’t end up hard like the regular can. 

Oakum 

Item # 

OAKUM1 Oakum, Treated, 1 lb package 

OAKUM5 Oakum, Treated, 5 lb box 

Oakum is a blend of fibers used by plumbers and shipyards but 

has served as an excellent hoof packing material. NUPAK Oakum is 

treated with 700 weight oil and comes in a 27 inch long 5 lb box. It 

is often coated by farriers with Pine Tar or Venice Turpentine to also 

serve as a hoof dressing. Made in USA (See page 21 for pine tar.) 

Sole-Guard 

EDSS Sole 

Support 

Oakum 

HOOF PACKING 

Equi-Pak 

Vettec Adhesive 

Foam Boards 

Equi-Pak 

Soft 

Equi-Pak 

Copper 

Sulfate 

Vettec Equi-Mesh 

Sil-Pak 

Contouring 

Plastic 

Equi-Build 

*Note: All Vettec 180cc products are used with 

the Vettec Gun #46902 and Mixing Tips #46901 (page 22). 

Vettec Accessories 

Item # 

46015 Adhesive Foam Boards 

Seals and supports Equi-Build #46126 or #46121 until set. Recesses 

material from ground level. Evenly distributes material over sole. 

Reduces the time holding the hoof up and is easy to remove. 

46030 Equi-Mesh Roll 

For use with Vettec items: #46126 or #46121. 

46094 Contouring Plastic (6” x 10” roll) 

Used after applying Sole-Guard #46190 to smooth and level the 

material, won’t stick to Sole-Guard. 

Vettec Instructional Guides 

46061 Vettec Instructional Video Free Product 

DVD showing how to use all of the Vettec products/Superfast, Equi 

Pak and CS, Adhere, Equi Build, Sil Pak and Sole Guard 

46090 Vettec Instructional Handbook Free Product 

Vettec handbook for all Vettec products. 

Superfast, Equi Pak and CS, Adhere, Equi Build, Sil Pak and Sole Guard 

Hawthorne Sole 

Pack Paddies 

Hawthorne Sole Pack 

Hawthorne Sole Pack 

Relieves dry, hard, sore hooves, while combating bacterial 

and fungal infections. It also treats white line disease. It is 

extremely effective in maintaining the natural pliability of 

the hoof. It is fast-acting, quick-penetrating and formulated 

with soothing natural ingredients. Directions: Cut out 

abscess and pack the incision with Sole Pack Hoof Packing. 

Bandage foot or use an Equine Slipper. Directions for 

overnight: Clean foot and pack hoof with Sole Pack. Cover 

with paper, bandage or boot. Directions for packing under 

a shoe: Clean and trim hoof and pack hoof with Sole Pack 

Hoof Packing. Apply pad and shoe on the hoof. 

HSPP Sole Pack, Prepared Paddies 

Easy-to-use individual “Dose Packs” are very convenient and 

ready to use. 

HSP4 Sole Pack, 4 lb 

HSP8 Sole Pack, 8 lb 


HOOF MOISTURIZERS, SEALERS 

Hoof Moisturizers 

Item # 

960050 Mane ‘n Tail Hoofmaker (Straight Arrow), 32 oz 

• Topical equine salve repairs and strengthens horse hooves 

• Non-greasy formula contains no pine tar, petroleum oil, or 

turpentine 

• Use daily on the hoof coronary band, walls, frog, and sole 

Develop strong, yet flexible, horse hooves. Topical salve is proteinenriched 

to moisturize the entire hoof area. Reduces dry and brittle 

coronary bands, walls, frogs, and soles. Helps repair external hoof 

damage. Contains no pine tar, petroleum oil, or turpentine, which dry 

out hooves and increase the chance of breakage or injury. Non-greasy 

formula is easy to use. Simply apply by hand and massage into hoof 

with fingertips. Use daily or as recommended by your veterinarian or 

farrier. Convenient pump bottle. 

Mane ‘n Tail Hoofmaker 

Sealants, Hardeners and Hoof Dressings 

Item # 

TS Mustad Tuff Stuff, Clear, 7.5 oz 

Use for toughening shod or unshod hooves, as an aid in moisture 

SEE VETTEC ADHERE AND SUPERFAST 

retention, and to strengthen soft or mushy hooves. May also be 

ON PAGE 22. 

used as a show cosmetic to give hooves a glass-like shine. 

CRS Crossapol Liquid Hoof Hardener, 275 ml 

Crossapol is the shortened term for crosslink aldehyde polymer. 

This is a chemical term for a solution that helps bind the protein 

or keratin. These protein molecules are responsible for making 

the hoof strong. This bonding creates a denser, stronger structure, 

making it more resistant to the damage of excessive moisture and 

chemicals such as the ammonia in urine which is known for its 

harmful effects on the hoof wall. Crossapol actually penetratesand 

works on the cellular level of the hoof and immediately improves 

it! It is both a corrective and preventative treatment, unlike the 

traditional method of applying a layer of oil that merely creates the 

appearance of a better hoof. Includes dauber. 

BOTH ARE GREAT FOR HOOF REPAIRS! 

HS Hoof Shield, 8 oz 

Hoof Shield is an all-natural hoof sealant formulated to maintain the 

natural moisture level of the hoof. It forms a barrier to prevent brittle 

Tuff Stuff 

Hardener 

Crossapol Liquid 

Hoof Hardener 

Delta Hoof 

Shield 

Hawthorne 

Venice 

Turpentine 

cracking in hot, dry conditions and soft, mushy hooves in wet conditions. 

Hoof Shield also fills old nail holes, which can prevent fungus from Hawthorne 

entering the hoof wall, while providing a show-ring shine. Multiple Item # 

layers of Hoof Shield provide an even deeper cosmetic appearance. HVT Venice Turpentine with Brush, 16 oz 

Temporarily replacing periople. Directions: Apply to clean, dry hoof wall 

below coronary band to ground surface. Do not apply to the coronary 

band. Allow 5 minutes drying time. Apply weekly for best results. You 

can use this after applying Crossapol. 

Helps relieve pain and soreness due to quarter cracks, split 

hooves, etc. Used to strengthen hooves and relieve soreness. 

Comes with a handy brush. 

The Lid-Locker Hat Rack 

Finally a place to hang your hat where it won’t get 

sat on, knocked on the floor or mis-shaped. This 

rack will hold your hat securely on the seat next to 

you. See age 91 for details! 

Try a pair today! See page 56. 


POULTICES, LINIMENTS, POLISHES 

Poultices 

Hobart Industries 

Item # 

330 Numotizine Poultice and Cataplasm, 24 oz *S/O 

331 Numotizine Poultice and Cataplasm, 3 lb *S/O 

The mother of poultices! Analgesic decongestive cataplasm for relief 

in local inflammation, chest congestions, swollen glands, bruises, sprains 

and muscular aches. Veterinary Numotizine Cataplasm is a comforting 

poultice of Kaolin, Beechwood, Creosote and Methyl Salicylate which 

helps provide temporary relief of superficial and muscular pain, soreness 

and stiffness in sprains, sore shin, tendonitis, and conditions. It is 

also effective in painful swellings - in fact, wherever there is need for 

massage and a comforting, counterirritant application. Applied as a 

poultice, Numotizine helps retain the body’s own warmth in the area 

under treatment. The Cataplasm medicated with guaiacol, beechwood 

creosote and methyl salicylate for comforting warmth. Directions: 

After first rubbing in a small quantity of Numotizine Cataplasm to insure 

contact with the skin, apply 1/4” thick. Cover with suitable bandaging. 

Numotizine Cataplasm may be spread directly on the skin and then 

bandaged, or spread on the cloth first and then applied with the poultice 

in contact with the skin. The application may be left on 8 to 12 hours 

before removing and replacing with a new application if desired. 

Numotizine does not have to be heated, but will act best when warmed 

to body temperature, especially if it has been stored in a cold place. 

Liniments 

DMSO 

Item # 

199 DMSO (Dimethyl sulfoxide) Roll-On, 3 oz 

99.9% pure DMSO. A staple in the equine industry to reduce acute 

swelling due to trauma. When combined with an antibiotic it will 

increase penetration when applied topically. Available in a convenient 

roll on for less mess. Dimethyl sulfoxide, or DMSO, is an all natural 

substance derived from wood pulp (lignin). DMSO has been widely 

used for many years in equine, animal and sports medicine for a 

variety of problems and conditions. Since it can be used for many 

conditions, some say this is the aspirin of our time. First and only 

coxib-class NSAID approved by the FDA for veterinary use. 

Reducine 

Item # 

890550 Reducine Absorbent for Horses, 1 lb 

The original Dublin formula since 1889 in the beautiful can. It is a 

counterirritant for use, and as an aid, in the temporary relief of minor 

stiffness and soreness caused by over exertion. Contains: Potassium 

Iodide; Iodine Resublimed; Pine Tar; Saponified Vegetable Oils. 

DIRECTIONS: Do not apply too much Reducine Absorbent at a time; 

enough to dampen the skin is sufficient. Clip the hair from the part 

to be treated and rub Reducine Absorbent in well either by hand or 

with a small stiff brush. Repeat this treatment on succeeding days 

until the skin shows signs of cracking or scaling. As soon as this is 

noticed, stop the applications and leave the part entirely alone. Do 

not use oil or lard as is customary after blistering. If very lame the 

animal should be turned out in a paddock, or led about by hand for 

half an hour twice daily. If not, it should be exercised gently every 

day, but in no case should it be allowed to stand all day in a stable. 

For ease of application, warm Reducine Absorbent before using. 

Polishes 

Laser Sheen 

Item # 

180372 Laser Sheen-Shine & Detangler (Farnam), 32 oz 

Show-stopping, high gloss formula produces a radiant shine. 

Detangles manes and tails, leaving them shiny & manageable. 

Repels dust, dirt and stains to cut grooming time in half. 


Absorbine 

Item # 

760105 Antiphlogistine Poultice, 5 lb 

Antiphlogistine Medicated Poultice is a time-proven Kaolin clay poultice 

that provides temporary relief from muscle strain, sprains, and 

ligament and tendon injuries by reducing inflammation and swelling. 

Natural Kaolin Clay poultice Antiphlogistine contains Eucalyptus Oil 

and Methyl Salicylate. 

• Antiphlogistine retains moisture to retain heat 

• Effective treatment for muscle soreness 

• Effective on abrasions, cuts, and stings 

• Antiphlogistine cools out damaged area 

• Antiphlogistine draws out deep-seated abscesses 

• Antiphlogistine provides relief from bee stings, poison ivy, poison 

oak and mosquito bites. 

DMSO Roll-On 

Numotizine 

Reducine 

Straight Arrow (Mane & Tail) 

Item # 

Antiphlogistine 

Mineral Ice 

960150 Mineral Ice, 1 lb 

Mineral Ice, a time proven pain fighter that delivers performance in one 

word - RELIEF. Ask any horse trainer! 

• Cool, fast, temporary relief of minor aches and pains 

• Reduces muscle and joint pain associated with arthritis, injuries, 

sprains, strains and bruises 

• Relieves minor soreness and stiffness from exercise and performing 

activities 

• All natural water based menthol formula contains no steroids or 

Benzocaine 

• Can be used as a therapeutic “cool down” body wash or brace 

• Use regularly before and after workouts during training 

• To make a brace just dilute with water and apply with sponge to legs 

and chest area to cool down and keep your horse from feeling 

fatigued or mix in spray bottle to spray on. 

Laser Sheen 


ANTISEPTICS, FLY SPRAYS, VACCINES 

Antiseptics/First Aid 

Item # 

420010 Dr. Nylor Blu Kote, 4 oz 

A quick-drying, protective wound antiseptic to treat ringworm, fungus 

infections, skin abrasions and surface wounds, cuts, galls, chafes, 

moist lesions, itchy fungus, eczema and sores; hoof, foot and pad 

sores on horses and dogs . Covers the wound with a deep, penetrating 

coating to promote clean, rapid healing. It has an unpleasant taste to 

help stop cannibalism. Not for use on food producing animals. Comes 

with dauber. **Not for sale in CA or for Export** 

180 Liquid Cut Heal Wound Care, 8 oz 

Use on minor cuts, abrasions, scrapes, and other skin irritations. 

Helps prevent wounds from drying out. Formulated with natural 

occurring disinfectants to keep wound clean. Perfect for nervous 

horses. Contains fish oil, raw linseed oil, spirits of turpentine, 

balsam of fir and sulfuric acid. The handy dauber enables even the 

most inaccessible wounded areas to be effectively covered. 

08 Bimedia Fura Septin, 16 oz 

Nitrofurazone soluble topical dressing: antibacterial protection, for 

the prevention or treatment of surface bacterial infections of wounds, 

burns and cutaneous ulcers. Apply directly to lesion with spatula or place 

on gauze. A must-have in every barn. **Not for sale in CA or for Export** 

Fly Spray & Insecticides 

Item # 

440 Pyranha Wipe-n-Spray, 32 oz 

Contains 3 active ingredients that quickly kill and repel flies, mosquitoes, 

gnats and other insects. This water resistant formulation conditions 

the coat and provides a healthy sheen. 

Can be applied as a fine spray or as a wipe. 

180455 Farnam Roll-on Fly Repellent, 2 oz 

Repels and kills house flies, stable flies, face flies and horn flies from 

sensitive areas of the face and head of horses, ponies, and dogs. 

Works hours at a time. Botanically-derived pyrethrin. 

Fly Masks 

Farnam 

Super Mask® II Fly Mask protects eyes from fly irritation, disease, 

flying dust, dirt & debris. New SuperMask II - with Double-Latch 

Closure have twice the staying power of other masks! Fly protection 

made to stay, even during horse play! New Double-Latch Closure 

keeps masks twice as secure as ever before. “No vision obstruction” 

design protects eyes from fly irritation, disease, flying dust, dirt & 

debris. Soft, sewn-in mesh ears allow the horse’s ears to move while 

protected. Speeds healing after eye injury and provides UV protection. 

Built to Fit, Built to Last, Built to Stay On! Combines function with 

fashion like no other fly mask! New, exclusive tri-color Shimmer 

Weave mesh in copper. Plush, flyproof trim keeps flies out, 

providing maximum comfort without rubbing or harsh abrasion. 

Item # 

180605 Fly Super Mask® II, Horse Size 

180606 Fly Super Mask® II, Yearling Size 

180607 Fly Super Mask® II, Arab Size 

180608 Fly Super Mask® II, Foal/Pony Size 

Vaccines 

Equine, Cattle, Sheep and Canine vaccines are available to our walk 

in customers or must be shipped by Next Day Air. These vaccines are 

perishable and need refrigeration. 

Item # 

30790 Canine 7 Way, 1 dose kit 

530170 Cattle 7 Way, 1 dose kit 

210540 Innovator 4, 1 dose kit 

100230 Rhino and Influenza, 1 dose kit 


Blu Kote Cut Heal Fura Septin Granulex® V 

Item # 

790100 Granulex® V Aerosol Spray, 4 oz *S/O 

Assists in healing through debridement and stimulations of epithelial 

tissue. Treats external wounds of dogs, cats, horses and cattle. For 

external wounds such as wire cuts, rope burns, abrasions, and 

lacerations in dogs, cats, horses, and cattle. 

GUARANTEED ANALYSIS: Each gram delivered to the wound site 

contains: Trypsin, crystalline, N.F. 0.12 mg. Balsam Peru, N.F., 87 

mg. Castor Oil, USP 788 mg. 

Pyranha 

Wipe-n-Spray 

See page 16 for 3M Vet Wrap. 

Item # 

80500 Prozap Poultry and Garden Dust, 2 lb 

Contains .25% Permethrin, in a dust formula, to control northern fowl 

and chicken mites, lice and bedbugs in poultry and poultry houses, 

and brown ticks and fleas on dogs and cats .Also controls certain 

garden variety insects. For poultry litter treatment: apply 1 lb per 40 

square feet. Hand application: use 1 lb to treat 100 birds. Poultry 

houses: apply 5 lbs per 1,000 square feet. Dogs and cats: rub in skin 

and apply to sleep quarters weekly. Do not use on puppies or kittens 

under 4 weeks of age or on pregnant dogs or cats. 

Farnam 

Roll-on Fly 

Repellent 

Farnam Super Mask II 

See page 24 for thrush and white line 

disease treatments. 

Be sure to check out our books at 

the end of the catalog: 

Our Equine Section on pages 120 - 122. 

Prozap Poultry 

& Garden Dust 


Dewormers 

Farnam 

Item # 

HHEIP Horse Health Equine Ivermectin Paste 1.87% 

Kills 35 species and stages of worms and bots combined. Kills all 

3 stages of the two most common bot species. Use 6 times per 

year for broad spectrum parasite control. For use on all horses, 

including broodmares, stallions and foals without age restriction. 

One syringe deworms horses up to 1,250 lbs. (600 kg.). Multi-dose 

syringe treats up to 3,750 lbs. 

980195 D-Worm Chewable Tablets for Small Dogs 

980197 D-Worm Chewable Tablets for Large Dogs 

The D-Worm Chewable Tablets contain pyrantel pamoate, 

proven effective in removing large roundworms & hookworms. 

Chewable tablets work within 24 hours. Regular use prevents 

roundworm reinfestation. Highly palatable and easy to administer 

-- no fasting or laxatives required. Net 2 tablets. 

980221 D-Worm Tablets for Small Dogs 

Pyrantel pamoate is proven effective in removing large roundworms 

and hookworms. Works within 24 hours. Regular use prevents 

roundworm reinfestation. Net 2 push tablets. 

We now offer LMF Horse Feeds. They 

are available for pick up. Call if 

interested in shipping options. 

All are listed on our website. 

Feed Supplements 

Psyllium Pellets (Sand Colic) 

Item # 

620115 Equi Aid, 5 lb *S/O 

99% pure psyllium seed husk to increase ration bulk. Helps 

prevent sand colic. Generic Equi Aid formula is also available. 

900660 TVS Vet Value PLUS (Generic), 5 lb *S/O 

Equicart 

1101 Equicart, 455 gm 

Evolve introduces Equicart, a two-step health and repair system for 

equine joints. Backed by clinical research, Equicart is a strong antiinflammatory 

and offers a natural alternative to Bute (phenylbutazone). 

Equicart also does not adversely affect the horse’s digestive system 

and so can be used to support joint health long-term. Equicart 

includes glucosamine, chondrotin, bosweilia, and hyaluronic acid. 

It is flavored with organic wheat grass and contains no additives. 

This is a dietary supplement that is added to feed. Use 5-15 grams 

daily (1-3 scoops) Protein: 1780mg; Calcium: 985mg; Phosphorus: 

455mg. 90 servings. 

SUPPLEMENTS, WORMERS 

D-Worm 

for Dogs 

Horse Health Equine Ivermectin Paste 

Tape Worm 

Tabs for Cats 

Psyllium Pellets Equicart Red Cell 

Worm Off 

Tablets 

Trade Winds 

Item # 

0006045 Tape Worm Tabs for Cats (Praziquantel) 

For Cats and Kittens Only. Fleas cause tapeworms in cats. Treat your 

cat for fleas regularly. Net 3 tablets. 

910690 Thomas Worm Off Tablets for Poultry 

Treats roundworms forexoctic game birds, chickens starting at 4 weeks. 

Net 60 tablets. 

589-1000 Wazine Piperazine 17% Lliquid for Poultry, 16 oz 

Wormer for use in drinking water for the removal of large roundworms 

from turkeys and chickens, and large roundworms and nodular worms 

from swine. 

Red Cell 

Item # 

586-0260 Red Cell, 32 oz *S/O 

586-0270 Red Cell, Gal *S/O 

The “industry standard” vitamin-mineral supplement for fueling 

champion horses. INGREDIENTS: Water, Ferric Sulfate, Ammonium 

Hydroxide, Citric Acid, Choline Chloride, Zinc Sulfate, Sorbitol, 

Magnesium Sulfate, Potassium Chloride, Vitamin E Supplement, 

Vitamin A, Acetate, D-activated Animal Sterol irradiated (source of 

Vitamin D-3), Copper Sulfate, Xanthan Gum, Manganese Sulfate, 

Thiamine Hydrochloride, Calcium Pantothenate, Saccharin Sodium, 

Riboflavin, Pyridoxine Hydrochloride, Folic Acid, Cobalt Sulfate, 

Menadione Sodium Bisulfite complex, Sodium Benzoate (a preservative), 

Niacinamide, Sodium Bicarbonate, Biotin, Sodium Selenite, Kelp 

Extract, Yucca Schidigera Extract, Ethylenediamine Dihydriodide, 

Vitamin B-12 Supplement, Artificial Cherry Flavoring, FD&C Red #40 

and Potassium Sorbate (a preservative). 



FARRIER APRONS 

Farrier Aprons 

Leather 

Pieh Legacy Collection 

Item # 

PTC-FA.SR Farrier Apron, Rust 27” 

Designed for the Pieh Legacy Collection with the input of many farriers. 

Our apron is made locally, in Camp Verde, Arizona. The body of the 

apron gives extra cover on the outside, while not bulking up the outside 

with stiff kneepads, keeping the kneepads where you need them -- 

between your legs and on your front thighs. The groin area is left open 

for more comfort and mobility. The handsome rust color of the suede 

may vary. Made from top quality split cowhide. Features double 

stitching throughout. 

• Two generous knife pockets are set at an angle so that the knife 

is easier to grab and are deep enough to protect your knife. The 

Knife pockets are reinforced along the top edge and are both sewn 

and riveted on. 

• The 33” leather belt attaches with an adjustable metal buckle 

on one end and two snaps on the other end. 

• The leg straps are secured with a snap style fastener so you 

can get out of your apron quick. They are 5/8” wide and 20” long. 

PTC-FA.ST Farrier Suede Apron, Tan 26” 

Designed for the Pieh Legacy Collection. The apron features double 

stitching throughout. The tan color of the suede leather may vary. 

Made from top quality split cowhide. 

• Features a double nail pocket on each leg below the knife 

pocket. The two generous knife pockets are deep enough to 

protect your knife. The Knife pockets are made from oil tanned 

leather and are reinforced along the top edge; both sewn and 

riveted for added durability. 

• The 28” leather belt attaches with an adjustable metal buckle 

on one end and Velcro on the other end. 

• The 2” wide leg straps are made of suede and are secured with 

Velcro so you can get out of your apron quick. 

The Pieh Aprons can be custom made. 

You must specify your options at the time of order placement, and 

Pieh Tool will confirm your request before processing. 

Here are the Options (see price list for additional costs): 

• You can also order the apron with straight pockets if you do not want 

the angled knife pocket style. 

• We can sew a 2” Magnet below the nail pocket on either side or 

both sides. Magnet is enclosed in leather on back side. 

• We can sew a 3” Magnet below the knife pocket on either side or both 

sides. Magnet is enclosed in leather on back side. 

• Increase Apron Length in inch increments: 1, 2, 3, and 4 inch. 

See Apron Magnets on page 61. 



Pieh Legacy Collection Farrier Apron, Rust 

Front View Side View 

Pieh Legacy Collection Farrier Apron, Tan 


www.piehtoolco.com � Fax 928-554-0800 � Phone 1-928-554-0700 




Leather - Continued 

Gibbins 

Item # 

GAB Wrap Around Apron, Long, 30” 

The Gibbins wrap around apron is made of Superthistle, top-of-the 

range suede and of bull’s hide. Superthistle has been specially 

designed for use by farriers. It retains its moisture and tends to 

leather-up with use, and is strong and supple without excessive 

weight. Apron is fastened around the waist with 1-1/2” belt and 

buckle. Legs are fastened with multi-position, quick release snap 

fastener. This style is open in the front and is sits lower on the hips 

(low rise) offering added flexibility. Knife pockets are low on the leg. 

GSTAPR Tear-Away with Velcro, Short, 26” 

GALT Tear-Away with Velcro, Long, 31” 

The Gibbins Tear-Away aprons feature Superthistle leather. Made 

from bull’s hide, specially designed for use by farriers. It provides 

excellent cover around your legs with Velcro fastenings at the thighs 

and waist plus a buckle to adjust the waist size. The large patches 

offer superior protection and a knife pocket is located on each leg. 

The legs fasten with a multi-position, quick release Tenax fastener. 

GBLAKES Blake Super Lite, Short, 26” 

GBLAKEL Blake Super Lite, Long, 31” 

The body of the Blake is cut like the Tear-Away but the legs give 

extra cover on the outside, keeping the knife well out of the way. 

Features a 2” webbing belt with a quick release fastener and 

the patented Combination Leg Fixings. These combined with the 

Tenax fastener and Velcro strip allows quick release and vertical 

adjustment. Generous patches where you need them. Knife 

pockets on each side. Brown color of leather varies. 

Synthetic 

Gibbins 

Item # 

GAFN Flame Master Tear-Away, Short, 26” 

GALFM Flame Master Tear-Away, Long, 31” 

The Gibbins Flame Master apron is made with flame retarding Nylon. 

Apron has Velcro fastenings at the legs and waist, plus a buckle to 

adjust the waist. Flamemaster fabrics combine state-of-the-art 

technology in flame retardant finishing, with the durability and 

aesthetic properties of cotton-rich polyester blends. The fabric will not 

ignite, burn or smoulder once heat source is removed. It provides 

effective protection against thermal and radiant heat and offers high 

resistance to welding sparks while protecting the farrier from oily dirt. 

SuperDura 

SDBS SuperDura, Short, Burgundy 

SDGS SuperDura, Short, Grey 

SDNS SuperDura, Short, Navy 

SDGM SuperDura, Medium, Green 

SDGRL SuperDura, Long, Grey 

SDGL SuperDura, Long, Green 

A great selling apron. The Super Dura is the “workhorse” of 

aprons. Double thick cordura. Offered in three lengths: Short: 26”, 

Medium: 29”, Long: 33” 

NC 

0243 Camouflage Cordura, 28-1/2” 

The NC Camouflage Apron is 28-1/2” long and is made of Cordura. 

See Apron Magnets on page 61. 

FARRIER APRONS 

Gibbins 

Wrap Around 

SuperDura 

Gibbins 

Tear- Away 

Item # 

GAF Replacement Tenax Fasteners 

Sold individually. 

NC Camouflage Cordura 

Gibbins Blake 

Super Lite 

Gibbins 

Flame Master 

Cotton Duct 

HOOF-it® Farrier Apron 

Hoof-it 

HI.FA HOOF-it® Farrier Apron, 28” 

The HOOF-it® Apron is a quality crafted from lightweight heavy 

black cotton duct. Economically priced for use by the working 

farrier, horse owner and hoof trimmer. 

Features: 

• Adjustable and removable leather knife pockets and 

leg protection 

• Quick release buckle 

• Leather knee pads 


HOOF KNIVES, LOOP KNIVES 

Hoof Knives 


Item # 

PTBKRH the Bonnie, RH Regular 

PTBKLH the Bonnie, LH Regular 

PTBKRHL the Bonnie, RH Long 

PTBKLHL the Bonnie, LH Long 

Bonnie knives have a deep curved stainless 

steel blade with a curved redwood handle. 

Holds their edge! 

Frost 

180RH 180 Wide, RH 

180LH 180 Wide, LH 

171NRH 171 Narrow, RH 

171NLH 171 Narrow, LH 

Frost knives are made in Sweden of quality 

cutlery carbon steel blades. Wood handles. 

Victorinox 

VRBRH Regular, RH 

VRBLH Regular, LH 

Made in Switzerland from special tool steel 

and to precise quality standards. 

Hall 

HCBK-R Curved Blade, RH 

HCBK-L Curved Blade, LH 

HDBK-R Drop Blade, RH 

HDBK-L Drop Blade, LH 

HOSK-R Offset Blade, RH 

HOSK-L Offset Blade, LH 

Made in Canada & have a carbon steel blade 

with milled ergonomic walnut handle. 

Ringel 

Made of carbon steel in Montana. Handles 

are handcrafted hardwood-wood types vary. 

(E = Elk horn handles *S/O) 

RSLH(-E) Straight, LH 

RSRH(-E) Straight, RH 

ROLH(-E) Offset, LH 

RORH(-E) Offset, RH 

Blades above are 2” long, 3/4“ wide at base, 

5/8” at tip. OAL is 8 3/8”. Curved handle. 

RMOL(-E) Mini Offset, LH 

RMOR(-E) Mini Offset, RH 

Blades above are 1 7/8” long, 5/8” at tip. 

OAL is 7 1/2”. Curved handle. 

ROWR(-E) Offset Wide 

JH Forge 

The custom hoof pick is designed to clean 

the foot, as well as exfoliate the sole with 

ease without dulling the blade or hook. 

Shoers who prefer to work with an angled 

hand like the deep curved blade. 

JH-DBL Deep Belly, LH 

JH-DBR Deep Belly, RH 

JH-DBR.S Deep Belly, Short Handle 

Double S Hoof Knives 

Made in Italy by brothers Marco and Leonardo 

Schelfi. Their knives are made from high grade 

steel and represent excellent value. The Classic 

(red box) Hoof Knife has a drop blade and 

ergonomic handle and is available in Right- 

Hand or Left-Hand Version. 

40003 Double S Classic, RH 

40004 Double S Classic, LH 

The Bonnie Regular 

The Bonnie Long 

Frost 180 Wide 

Frost 171 Narrow 

Victorinox Regular 

Hall Curved Blade 

Hall Drop Blade 

Hall Offset Blade 

Ringel Straight Blade 

Ringel Offset Blade 

Ringel Mini Offset Blade 

Ringel Offset Wide Blade 

JH Forge Deep Belly 

Double S Classic 

See Knife Sharpeners, page 61. 

Double-Edge Knives 

Ringel 

Item # 

RADE(-E) Abscess, Double Edge 

Blade is 1-7/8” long and 5/8” at tip. OAL 

is 6-5/8”. Comes with protective sheath. 


Frost 

188RH 188 Double Edge, RH 

Frost knives are sharp & made from carbon 

steel. Made in Sweden. 

Victorinox 

VDEBRH Double Edge, RH 

VDEBLH Double Edge, LH 

Loop Knives 


Item # 

PTBLK the Billy Loop 

Handcrafted with a sharp stainless steel 

blade with a beautiful redwood handle. 

PTLR-R Pieh Looped Ring, RH 

This hard to fine knife is handcrafted from 

the finest materials. The sharp stainless 

steel blade is used for paring out the frog. 

Beautiful round wood handle. 

Ringel 

Made of carbon steel in Montana. Handles 

are handcrafted hardwood-wood types vary. 


RLK3(-E) Loop (1/2“ loop) 

RLK2(-E) Loop (1” loop) 

RLK1(-E) Loop (1-3/8” loop) 

RLK4(-E) Loop (1-1/2” loop) 

Carbon steel blades and handcrafted 

hardwood handles. #RLK3 comes with 

protective sheath. 

Hall 

HLOOP Loop 

HAKS Abscess, Small 

HAKL Abscess, Large 

Knives feature a carbon steel loop with 

milled ergonomic walnut handle. Made in 

Canada. 

Misc. Loop Knives 

JCLOOP Soundmount Loop Knife 

The Soundmount has a long handsome wood 

handle with a sharp loop blade. 

(Formerly called the JC Loop knife) 

JH-LOOP.CL JH Forge Classic Loop 

3/4” wide with a built-in hoof pick with wood 

handle. Knife is ambidextrous. Made in USA. 

ABLOOP Anvil Brand Loop 

Features an ergonomic plastic handle. 

Trail Knife 


Item # 

PT5BL Pieh Horseman’s Utility Tool 

You won’t need to be a horseman to 

appreciate this pocketknife. Handled in 

redwood, featuring a high grade stainless 

steel cutting blade, hoof trimming blade, 

hoof pick, mane comb & leather awl/hoof 

cleaner. 


Ringel Abscess 

Double Edge 

Frost 188 Double Edge 

Pieh Tool Billy Loop 


Looped Ring 

Victorinox 

Double Edge 

Ringel 1/2” Loop 

Ringel 1” Loop 

Ringel 1-3/8” Loop 

Ringel 1-1/2” Loop 

Hall Loop 

Hall Abscess, Small 

Hall Abscess, Large 

Soundmount Loop 

JH Forge Classic Loop 

Anvil Brand Loop 

Pieh Horseman’s Utility Tool 


Farrier Rasps 

Nicholson 

Item # 

18155N Farrier’s Handy Rasp and File, 14“ 

The Nicholson Handy Rasp is an American pattern and is 

tanged and is single cut on the edges. It features a comfortable 

cushion grip at point and handle. It has rasp teeth on one 

side and file teeth on the opposite side with 6 teeth per row 

(other horse rasps have 5 teeth per row). The rasp body is the 

same as the 14” Platers’s Special rasp. Overall length: 17 1/2” 

HR14 Horse Rasp and File, 14” 

American pattern farrier's rasp, has a double extra thin 

aggressive cut. Both sides are safe 7/8" 22mm at point. 

Rasp teeth on one side, file teeth on opposite and the cut is 

6 teeth per row. For race track and horses with light shoes. 

18130 Platers Magicut, 14” 

American pattern has a single cut on edges. Opposite side 

has the unique Magicut file pattern. These are narrow chip 

breakers created by steep and angled serrations. Tooth 

design is cut deeper to last longer and cuts much faster 

than conventional horse rasps. 

Bellota 

BTSR Top Sharp Rasp, 14” 

The aggressive design of the file side on the Top Sharp 

lets you get in and get out with maximum results. 

BCR Classic, 14” 

The smooth cut of the Classic file side is the best choice 

for a smooth finish. 

Heller by Mustad (formerly Simonds) 

SRTR Red Tang Platers, 14” 

Simonds, now Heller, set an industry standard with its 

Red Tang, providing the sharpest, longest lasting rasp available. 

SBR Black Master, 14” 

It features an industry standard of sharpening and a special 

tooth design. It also has a special black oxide coating that 

resists clogging, rust, and stays sharper longer. Has one 

more row of teeth than the Red Tang. 

SHL Legend, 14” 

This is an aggressive rasp especially useful in wet, muddy 

and gummy conditions. The thumbnail shaped tool cuts 

fast and smooth. The open tooth design resists clogging 

in muddy conditions, and the staggered tooth pattern 

pulls straight and leaves a smooth finish. The teeth are 

specially sharpened to stay sharper longer. 

SBHL Black Legend, 14” 

An aggressive rasp with the same SHL features. But the 

black finish resists clogging and loading, and decreases the 

opportunity for rust. The Black Heller Legend Rasp produces 

unbelievable consistency and longer lasting results. 

SBHR Big Hoof, 17” 

17” from heel to shoulder, 3” more than a standard rasp. 

Allows you to use fewer strokes, increasing your efficiency 

and reducing fatigue. This rasp can be used for warm 

bloods, draft horses, or any large horses. 

Save Edge 

SERP Rasp, 14” 

One of the best selling rasps on the market, it is sharp, 

consistent, and long lasting. 

SEBR-14 Beast, 14” 

SEBR-17 Beast, 17” 

This impressive rasp gives you 35% more cutting surface. 

Has the same patented Save-Edge tooth design. 

Vallorbe 

VR14 Spirit Rasp, 14” 

Vallorbe Swiss have been manufacturing rasps and files for 

over a century and their long experience is evident in this 

high quality horse hoof rasp, sharpened by the exclusive 

V-Sharp technology. Vallorbe rasps last considerably longer 

than other rasps due to the high quality steel used. They do 

not clog and they give a high quality finish. 

Nicholson Farrier 

Handy Rasp 

Nicholson 

Magicut 

Nicholson 

Horse Rasp 

& File 

Save Edge 

Bellota 

Top 

Sharp 

Bellota 

Classic 

Red Tang 

Heller Legend 

Black Heller Legend 

Big Hoof 

Save Edge Beast 

RASPS, FILES 

Farrier Finishing Files 

Item # 

SBMFF Heller Black Finish File, 14” 

Specially treated with a black oxide coating. It 

lasts longer due to increased resistance to loading 

and rust. 

SMFF Heller Master Finish File, 14” 

SEFR Save-Edge Finish Rasp, 14” 

Save Edge rasps are known for their long lasting 

and patented tooth design. 

Metal Files 

Nicholson 

Item # 

05190 Half Round Pipeliner File, 14” 

American pattern half round pipeliner file, with a 

bastard cut for use on concave, convex and flat 

surfaces. Round on one side, flat on opposite. 

Both sides are single cut. 

07894 Flat Magicut File, 8” 

07917 Flat Magicut File, 10” 

American pattern flat Magicut file used by 

machinists as an all-purpose file to remove stock 

rapidly created by steep, angled serrations. 

Leaves a smooth finish. File has a rectangular 

shape, a tapered point in width. 

03863 Flat Bastard File, 14” 

American pattern flat file, with a bastard cut, 

used by machinists & repairman who require rapid 

removal of metal. Rectangular in cross section & 

in taper towards the point in width, double cut on 

sides, single cut on edges. 

16507 Bastard Cut Warding File, 4” 

American pattern warding file, bastard cut. Thin 

rectangular shape with double cut on sides, single 

cut on edges. Good for narrow spaces where 

other files will not fit. 

08354 Mill Bastard File, 6” 

American pattern mill file, bastard cut used for 

sharpening mill or circular saws, also for drawfiling 

and finishing metals. Rectangular shape 

with single cut on sides and edges. Has 2 square 

edges and tapers slightly in width. 

14729N Extra Slim Taper File, 8” 

American pattern extra slim taper file made 

for filing saws with 60° angle teeth. Triangular 

shaped, single cut with edges set and cut for 

filing gullets between saw teeth. Tapers slightly 

towards the point. 

02215 Flat Chain Saw File, 8” 

American pattern used for cutter-raker type (2 round 

edges) chain saws. Has a rectangular shape. 

01630 Round Chainsaw File, 5/32x6” 

01888 Round Chainsaw File, 7/32x8” 

American pattern smooth cut round chainsaw file. 

Heller by Mustad (formerly Simonds) 

Item # 

S6V2RE Veneer Knife - 2 Round Edges, 6” 

S8V2RE Veneer Knife - 2 Round Edges, 8” 

A specially sharpened Mill Bastard File with 2 

round edges designed to sharpen veneer knives. 

Veneer Knife Files are single cut and are parallel 

in width and thickness. 

Heller Black 

Finish File 

Save Edge 

Finish Rasp 

Nicholson 

Half Round 

Nicholson 

Magicut File 

Nicholson 

Flat Bastard 

Nicholson 

Bastard Cut 

Warding 

Nicholson Mill 

Bastard 

Nicholson Extra 

Slim Taper 

Nicholson Flat 

Chain Saw 

Nicholson 

Round 

Chain Saw 

Heller Veneer 

Knife 

Find Knife Sharpeners on page 61. 

Pieh Tool Company, Inc. 

Vallorbe Rasp 

1-888-743-4866 31

FILE HANDLES, RULERS 

Rasp File Handles 

Aluminum 

Item # 

PARH Pieh Tool Rasp Handle, Large 

PARHS Pieh Tool Rasp Handle, Small 

Ergonomic shape fits great in the palm of your 

hand! Fits most files and rasps. Allen wrench 

included. Made in USA. 

ALRHL FPD Rasp Handle, Large 

ALRH FPD Rasp Handle, Medium 

Medium measures 1-1/2” diameter. The Large 

measures 1-3/4” diameter. Fits all 14” rasps. 

Allen wrench included. 

Plastic 

SERH Save-Edge Screw-on Rasp Handle 

The Save-Edge plastic screw-on rasp handle 

will fit all 14” rasps tangs. Comes in blue, black 

or white. 

Wood 

BRH Bellota Screw-on Rasp Handle 

FHDO3 Screw-On File Handle, 3-6” files 

TG3 Screw-On File Handle, 6-8” files 

TG4 Screw-On File Handle, 10-18” rasps 

Fits 14” tanged rasps. Has strong metal 

ferrules. Fits the specified tang file sizes and fits 

comfortably in your hand. 

Rasp Holders 

Item # 

NCRH NC Rasp Holder 

Keep your rasp sharp and handy! Made of black 

urethane. 

JVRH JV Rasp Holder 

The same rasp holder on the JV Products 

shoeing boxes. Made from aircraft aluminum 

and lined with vinyl to protect your rasp. 

File Cleaner 

Item # 

21467 Nicholson File Card & Brush, 10” 

Especially for use on finer cut files. 

Sand Bar 

Item # 

SANDBAR Sand Bar Sponge 

Medium to Coarse sponge sanding block used 

on horses hooves before gluing on shoes, using 

adhesives and for general finishing of the hoof 

Ruler 

Item # 

WHR W-Brand Steel Horseshoer’s Rule, 16” 

Made of durable steel. One side measures 0-16”. 

The other side has 0 in the center measuring 8” 

in either direction. This handy ruler allows quick 

and accurate measuring in either direction making 

it a staple in your tool collection. The reverse 

side of the ruler contains common horseshoe 

measurements for bar stock, bar stock weight in 

ounces per inch, a pritchel point guide and more! 

16” Steel Horseshoer’s Rule 

Large 

Pieh Handles 

Aluminum Rasp Handles 

Medium and Large 

Save-Edge 

Plastic 

Handle 

Wood File Handle, FHDO3 

Wood File Handle, TG3 & TG4 

NC Rasp Holder 

JV Rasp Holder 

File Card and Brush 

Sand Bar 

We have more 

Rulers with 

Bellota 

Wood 

Handle 

Knife Sharpeners, 

Magnets, 

Silver Pencils, 

and Soap Stones 

on pages 61 & 62. 

Nordic Forge 

Trimming Kit 

Farrier Trimming Kit 

Item # 

5050 Nordic Forge Professional Trimming Kit 

An attractive set makes a perfect gift. Contains one each of 

the following 9 hoof trimming tools: 10 oz Driving Hammer, 14” 

Nipper, Hoof Knife, Rasp, Rasp Handle, Clinch Cutter, Hoof 

Pick, Clincher and Pritchel. Designed especially for trimming 

hooves and shoeing horses. Can be used for cattle, too. 

Nail Nippers 

Diamond 

Item # 

N10 10” Nail Nipper 

Diamond Nail Nipper 

Improved beveled cutting angle adds 

strength. Has fully polished head 

with wide throat clearance. 

Bellota 

BNC9 9“ Nail Cutter 

The Bellota nail cutter works with relative 

ease because of the rivet position. 

You’ll have to try these to see just how 

easy cutting horseshoe nails can be. 

Knipex 

Bellota Nail Cutter 

WKN8 Knipex 8” Nail Nipper 

The Knipex 8” Farrier Nail Nipper is easy 

to use and fits easily in your shoeing 

box. The sharp edge cuts nails quick. Knipex Nail Cutter 

Hoof Nippers 

Diamond 

Item # 

FN12 12” Nipper 

FN15 15” Nipper 

The 12” and 15” are both adequate 

nippers for horseowners and those 

just getting started in horseshoeing. 

They are precision manufactured 

of alloy steel with a button rivet. 

14D 14” Nipper 

This economy model is forged from high 

quality steel, chrome plated and is heat 

treated. The nipper has plastic coated 

handles for comfort and added grip. 

DS 

DS14 14” Nipper 



DSRT12 12” Race Track Nipper 

DSRT14 14” Race Track Nipper 

DS Tools are made of high quality tool 

steel. They are custom ground and 

polished by hand since 1965. 

DS Race 

Track 12” & 

14” Nippers 

Diamond 12” & 15” Nippers 

Diamond 

14” 

Nipper 

DS 14” Nipper 

DS 15” Nipper 

DS 12” Race 

Track Nipper 


Small

NIPPERS, NAIL PULLERS, PULL OFFS 

Hoof Nippers - continued 


Item # 

PT12N Pieh Hoof Nipper, 12” 



Pieh Tool Hoof Nippers are made with high quality 

tool steel and are finished to provide maximum 

cutting performance in 3 sizes. Our nippers can be 

rebuilt at least 2 times unless chips in the blade are 

too deep. The heat treated area is about 1/4” to 1/2” 

for both blades. This is good news because if you 

do hit a nail, they most likely won’t break past this 

point. All nippers are heat treated and sharpened by 

a professional bladesmith in Camp Verde, Arizona. 

GE 

Item # 

GE12N 12” Nipper 

GE14N 14” Nipper GE 12”, 14” & 15” Nippers 

GE15N 15” Nipper 

GE Nippers are drop forged from chrome vanadium 

steel. The blades are aligned and sharpened by 

hand for accurate trimming and longer blade life. 

They are designed for professional farriers with 

maximum precision and minimum fatigue. 

GE12N-EZ 12” Easy Nipper 



The Easy Nipper reins have the characteristics of 

the GE Curved Jaw Clincher with the leverage of 

their 14” Nipper. This design causes less fatigue 

on the hands and aids in dry climates where 

reins tend to spring! 

GE14RTN 14” Race Track Nipper 

The head is smaller, for performance horses, with 

a finer cutting edge than the regular 14” nipper. 

GE12HRN 12” Half-Round Nipper 

Designed for hoof wall work and clip placement and 

is excellent for hard-to-get-at places in the hoof. 

Lopez 

Item # 

LFT4004 14” Nipper 

LFT4007 15” Nipper 

Joe Lopez, a former GE Forge tool maker, has an 

established reputation for quality workmanship. 

Nordic Forge 

Item # 

NFJP12P Viking 12”, Nipper 

NFJP12SP Viking 12” 

Semi-Polished Nipper 

NFJP15P Viking 15”, Nipper 

NFJP15SP Viking 15” 

Semi-Polished Nipper 

Outstanding quality for the price! Forged from 

high quality tool steel, heat treated for strength, 

features precision machined cutting edges. 

Available fully polished or semi-polished (head 

polished only). 

Nipper Spring 

Item # 

WNS W-Brand Nipper Spring 

The nipper spring allows you to cut while using 

only one hand. It fits over the reins of the nipper. 


Hoof Nipper 

GE 15” Nipper 

GE 15” Easy 

Nipper 

GE 14” Race 

Track Nipper 

GE Half Round 

Nipper 

Lopez Nipper 

Lopez 14” & 

15” Nippers 

Viking 12” Semi- 

Polished Nipper 

Viking 15” Semi-Polished Nipper 

Viking 15” 

Polished Nipper 

Nipper Spring 

shown installed 

Nipper Rebuilds 

(Prepayment Required) 

Item # 

HoRebSrv Pieh Nipper Rebuild Service 

All brands taken (except MFC). 

HoRebSrvHR Pieh Nipper to Half Round 

Conversion Service 

We can convert most nippers into a Half Round for 

a fraction of the cost of a new Half Round nipper! 

All brands taken (except MFC). 

Crease Nail Pullers 


Item # 

PTCNP Pieh Crease Nail Puller 

The Pieh Tool Crease Nail Pullers are drop 

forged from Chrome Vanadium steel. (A type 

of steel made from two alloys that is used in 

large-diameter spring wire, an excellent choice 

for high-stress applications. The jaws are 

designed to lock over the nailhead and along 

its taper to remove a single nail from creased, 

swaged or fullered shoes. 

Diamond 

NP12 12” Nail Puller 

Removes nails from crease of shoes that have 

been on the horse for some time. 

Lopez 

LFT4001 9” Nail Puller 

Rubber cushioned handles. Made with high quality 

tool steel and are finished to provide maximum 

performance. The quality finish is a trademark of 

Lopez tools. 

GE 

GECNP 12” Nail Puller 

GE Nail Pullers are drop forged from chrome 

molybdenum steel. The jaws are designed to lock 

over the nail head and along its taper to remove a 

single nail from creased, swaged or fullered shoes. 

Nail Puller Rebuilds 

(Prepayment and FOB Required) 

Item # 

LFR5009 Lopez Farrier Rebuild Service 

GE and Lopez brands only. 

Pull Offs/Spreaders 

GE 

Item # 

GE12PO 12” Pull Off 

GE14PO 14” Pull Off 

Drop forged from chrome vanadium steel with knobs 

on the handles. Used in the removal of shoes and 

can also cut nails without damage to the blades. 

Nordic 

NFJP12PO Viking 12” Spreader/Pull Off 

Forged from high quality tool steel and heat treated 

for strength. Precision machined, fully polished. Has 

sharp outside teeth for spreading. Can also be used 

for cutting nails. Good quality for the price! 

Diamond 

SP12D 12” Spreader/Pull Off 

Combination Spreader/Pullers have sharp 

outside teeth for spreading. Can also be used 

for cutting nails. 

Pieh Tool Crease 

Nail Puller 

PTC Crease Nail 

Puller Close Up 

Diamond Crease 

Nail Puller 

Lopez 9” 

Nail Puller 

GE 12” Nail Puller 

GE 12” Pull Off 

Viking Spreader 

Pull Off 

Diamond Pull Off 

& Spreader 


SPREADERS, GAUGES, CLINCHERS 

Shoe Spreaders 

Item # 

KSS Kulp Shoe Spreader, 12” 

Forged from high-quality tool steel with a 

unique design. It features two different 

spreader sizes in one tool, adjusting from 

pony to warmblood sizes. 

DSSP DS Shoe Spreader, 15” 

DS tools are made of high quality tool steel. 

Custom ground & polished since 1965. 

LFT4014 Lopez Shoe Spreader, 14” 

Spreader has rubber cushioned grip handles. 

4-1/4” wide head. The quality finish is a 

trademark of Lopez tools. 

Hoof Testers 


Item # 

PTHTL Pieh Hoof Tester, Large 

Made from quality tool steel. Has 12” reins, 

OAL 19”, opens to 9-1/2”. Soft brushed finish. 

PTHTS Pieh Hoof Tester, Small 

Made from quality tool steel. Has 9” reins, 

OAL 13-1/2”, opens to 5”. Round edges with 

high polished finish. 

W-Brand 

WHT W-Brand Hoof Tester 

Hoof Gauges 


Item # 

PTHGB Pieh Brass Hoof Gauge 

Our gauge is constructed of brass and will 

give good easy to read measurements. 

Ruidoso 

RHG Metal Hoof Gauge 

Doesn't waste your time with false or inaccurate 

readings. The self-adjusting design lets you move 

from hoof to hoof without the usual re-calibration. 

Surface plate allows easy leveling of entire 

perimeter of foot plane, and the easy reading 

guide lets you "gauge-and-go" with confidence. 

Finnegan 

FHG Metal Hoof Gauge 

Based on the T-square principle, measures 

both medial-to-lateral balance and hoof 

angulation. Built from aluminum and adjustable 

to fit all hoof sizes, it is accurate and easy to 

use. Instructions and a marking pencil included. 

Ward & Story 

WSHP Aluminum Hoof Gauge 

High tensile Aluminum. Two point contact of 

arm. Calibrated. Full toe clearance. 

WSHG-RA Replacement Arm *S/O 

NC 

0715 Cavalry Hoof Gauge #1 

For sizes 3x0-0. Cast aluminum. 

0715A Cavalry Hoof Gauge #2 

For sizes 1-4. Cast aluminum. 

W-Brand 

WHE Hoof Evener 

Measures the length of the hoof wall at the toe 

immediately after trimming it. Comes attached 

with a clip pocket. Instructions included. 


Kulp 

Spreader 

Pieh Brass 

Hoof Gauge 

Lopez Spreader 

Arm 

DS Spreader 

Pieh Large 

Hoof Tester 

Pieh Small 

Hoof Tester 

W-Brand Hoof 

Tester 

Hoof Evener 

Ruidoso 

Hoof 

Gauge 

Finnigan 

Hoof Gauge 

Ward & Story 

Hoof Gauge 

Calvary 

Hoof Gauge 

Dividers 


Item # 

PTWD Pieh Tool Wing Divider 

Used for measuring the toe & heel. 7” long. 

JH Forge 

JH-DIV JH Premium Wing Divider 

Anodized Aluminum with crisp numbers. 

Comes with instructions. 

Hoof Picks 


Item # 

PTHPH Pieh Hoof Pick 

Durable with a plastic coated handle. 

VF27 Horse Head Hoof Pick 

Hand forged by Victory Forge. 

Tooth Floats 

Item # 

28975 Combination Dental Float Set 

Kit includes 1 straight and 1 angular float 

with refillable carbon blade. The medium grit 

carbon blade is 1” wide by 3-1/4 “ long, and 

1/8” thick. 

Horse Restraints 

Item # 

23225 Yorkshire Twitch, 27” 

Aids in the humane control of horse by 

applying constant pressure to upper lip. A 

nickel plated twist chain is attached at one 

end. The average chain length is 12-14”, 

making a loop. 

Clinchers 

Clinchers should flatten tight clinches with 

little effort. Most work on high or low nails. 

Diamond 

Diamond clinchers are 12” long. 

Item # 

HC12 Saddle Horse Clincher 

The Saddlehorse is for use on larger nails in 

saddle horse hoofs. 

PC12 Gooseneck Clincher 

The Gooseneck is for smaller nails when 

shoeing ponies and race horses. 

FC12 Farrier Clincher 

The Farrier Clincher is designed to roll over 

high and low nails. Downward push with 

rolling action clinches nail. Note: Tool should 

not be squeezed when clinching nail. 

GE 

GE clinchers are drop forged from chrome 

vanadium steel. They are perfectly balanced 

for a comfortable grip and better clinch 

control. The teeth are heat treated to hold 

their bite under heavy use. 

GECJC Curved Clincher, 12” 

GECJLN Curved Low Nail Clincher, 12” 

The Low Nail Clincher is ideal for clinching 

#5 or smaller nails. A racehorse platers 

dream! 


Wing Divider 

Combination 

Dental Float 

Yorkshire Twitch 

JH Forge 

Wing Divider 

Pieh Hoof Pick 

Victory Forge 

Horse Head 

Hoof Pick 

Diamond Saddle 

Horse Clincher 

Diamond Gooseneck 

Clincher 

Diamond Farrier 

Clincher 

GE Curved 

Jaw Clincher 

GE Curved Jaw 

Low Nail Clincher 


Clinchers (continued) 

Lopez 

Item # 

The quality finish is a trademark of Lopez 

tools. Made with high quality tool steel and 

are finished to provide maximum performance. 

LFT4002 Saddlehorse Clincher, 13” 

LFT4003 Angled Jaw Clincher, 13” 

Ergonomic handle with offset jaw for leverage. 

LFT4008 Low Nail Clincher, 13” 

Blurton 

JBCCJ Curved Jaw Clincher, 12” *S/O 

Incorporates replaceable top teeth made from 

durable Stellite. Made in England. 

DS 

DSGN Gooseneck Clincher, 12” 

DSSHA Saddlehorse Alligator Clincher, 12” 

Made of high quality tool steel. They are custom 

forged and polished by hand since 1965. 

Clincher Rebuilds 

(Prepayment Required) 

Item # 

LFR5008 Lopez Farrier Rebuild Service 

GE, DS, Lopez brands only. 

Clinch Cutters 

Beveled cutting edge on one end, pritchel 

on the other end. 


Item # 

PTCC Pieh Tool Clinch Cutter, 6” 

High quality tool steel that stays sharp. 

Beveled on outside only. 

Diamond 

C7 Clinch Cutter, 6” 

Beveled outside edge, flush inside edge for 

close cutting. 

GE 

GECC Clinch Cutter, 6” *S/O 

Drop forged S1 tool steel and heat treated. 

Has a beveled edge on both sides. 

Blurton 

JBCCGCT Clinch Cutter/Gouge, 6” 

Made from S1 tool steel and resists mushrooming. 

Features a gouge for under-cutting clinches. 

Gouges 


Item # 

VHG Pieh Tool Hoof Gouge 

Double ended right hand/left hand undercut. 

Clinch Blocks 

Diamond 

Item # 

CB4 Clinch Block 

Solid steel for clinching and seating nails. 4” long. 

DS 

DSCB Clinch Block 

Made of high quality tool steel. Their tools are 

custom forged and polished by hand since 1965. 

CLINCHERS, HARDYS, PUNCHES 

Lopez Saddlehorse 

Clincher 

Lopez Style 

Angled Jaw Clincher 

Lopez Low Nail Clincher 

Blurton Curved Jaw 

Clincher 

DS Gooseneck Clincher 

DS Saddlehorse 

Alligator Clincher 

Pieh Clinch 

Cutter 

Diamond 

Clinch Cutter 

GE Clinch 

Cutter 

Blurton Clinch 

Cutter/Gouge 

Pieh Tool Gouge 

Diamond Clinch Block 

DS Clinch Block 

Hardys & Chisels 


Our hardy is drop forged from H13 tool 

steel. Beveled on both sides. Made in USA 

exclusively for the Pieh Legacy Collection. 

Item # 

PTCH750 Pieh Tool Chisel Hardy, 3/4” 

PTCH875 Pieh Tool Chisel Hardy, 7/8” 

PTCH100 Pieh Tool Chisel Hardy, 1“ 

PTCH125 Pieh Tool Chisel Hardy, 1-1/4“ 

GE 

GEVH1 V Hardy, 1” 

GEVH78 V Hardy, 7/8” 

GECH1 Chisel Hardy, 1” 

GECH78 Chisel Hardy, 7/8” 

Hardys are drop forged from abrasion 

resistant tool steel. The V-Hardy cuts heels 

precisely on stock up to 7/8”. The hardy 

edge is machined to a precise edge. 

Anvil Devils 

Item # 

SAD Anvil Devil 

An Anvil Devil is a hard triangular piece of 

heat-treated steel that is used by farriers 

and blacksmiths for cutting or making V 

notches. You can place it on any flat surface 

(or use in a GE Anvil Devil holder if you can 

still find one!). 2-1/2x1/2” (63.5x13mm) 

Pritchels 

Blurton 

Item # 

JBPCH City Head Pritchel, 11 3/4”*S/O 

JBPE E Head Pritchel, 11 3/4”*S/O 

All made from S1 tool steel in England. 

Diamond 

P12 Pritchel, 12” 

Flatland Forge-Jim Poor 

FFP Pritchel, 12” 

Has a long gradual taper, with clean, sharp 

edges. Hand forged, providing optimum 

strength to the tool. 

Punches 


Item # 

CP000 Pieh Tool Center Punch, 7-8” 

PCP000 Pieh Pyramid S7, 7” long 

Made from S7 tool steel in the USA. 

Flatland Forge-Jim Poor 

CNTRP1 Center Punch, 7” 

Made of 4140 alloy steel. Made in USA. 

SPH1 Stud Punch, 5/16” 

Made from S7 tool steel. Made in USA. 


Pieh Hardy 

GE V & Chisel 

Hardy’s 

Blurton 

Pritchel 

Anvil Devils 

Flatland 

Pritchel 

Pieh Center Punch 

Pieh Pyramid 

Center Punch 

Flatland Center 

Punch 

We off more styles of Hardies & 

Punches on pages 53- 54. 

Flatland 

Stud Punch 


FOREPUNCHES, CREASERS 

Forepunches 

Flatland Forge With Steel Handles 

Item # 

CTYP1 City Head Forepunch 

EH1 E Head Forepunch 

Made of S7 Tool Steel. They are slightly 

softer on the striking end, and designed to 

mushroom there. The punching end of the tool 

is hardened for maximum wear. The City Head 

works well as a plain stamp punch, or a drift for 

fullered shoes. Made in USA. 

Blurton With Steel Handles 

JBSHFCH City Head Forepunch *S/O 

JBSHFE E Head Forepunch *S/O 

JBSHFJC JC Forepunch *S/O 

JBSHFD Draft Forepunch *S/O 

Blurton Forepunches are made from S1 tool 

steel to resist mushrooming and can be easily 

modified for a specific nail size. Made in 

England. 

Fullers/Creasers 

Fullers will allow you to make the perfect 

crease in all types of metal stock. 

Flatland Forge With Wood Handles 

Item # 

FLR2L Slim Fuller, Left Hand 

FLR2R Slim Fuller, Right Hand 

Made from S7 tool steel to resist mushrooming. 

Made in USA. 

Blurton With Wood Handles 

JBCWH Creaser *S/O 

Made from S1 tool steel. Made in England. 

Mustad With Wood Handles 

60038 Creaser (Fuller) *S/O 

The Mustad Fuller tool is made of tool steel and 

the handle is made of high quality American 

Hickory. 


Flatland CH 

Forepunch 

Flatland EH 

Forepunch 

Blurton CH Steel 

Handled Forepunch 

Blurton EH Steel 

Handled Forepunch 

Blurton Creaser Steel Handle 

Blurton Creaser Wood Handle 

Mustad Fuller 

Additional Farrier Tools . . . 

Rounding Hammers -- page 45 

Driving Hammers -- page 46 

Center Punches -- page 54 

Fitting and Fire Tongs -- page 56-57 

along with our complete tong selection. 

Horseshoeing and Horse Care books 

starting -- page 120 

Equine Anatomy Charts -- page 124 

Horseshoeing Videos -- page 130 

Flatland Fuller 

Mustad With Wood Handles 

Item # 

60036 CH Forepunch 

60037 EH Forepunch 

A specially designed Forepunch 

made in two versions: City Head 

for flatter heads such as ASM, 

REG, City and ASV and E-Head 

for the European rectangular/ 

square standard heads such as 

E, EX, MX and M. The Mustad 

Forepunch tool is made of tool 

steel and hardened for durability 

and to minimize the risk of 

splitting. The handle is made of 

high quality American Hickory and 

a comfortable and secure grip is 

guaranteed. Always wear safety 

glasses when using a forepunch. 

Mustad CH 

Forepunch 

Mustad EH 

Forepunch 

Clip Starters 

Cliff Carroll 

Item # 

CCCS1 Clip Starter, 1” 

Moving the proper amount of steel is a determining 

factor for drawing uniform clips. Using 2 or 3 blows, 

drive this tool down the hardie hole, through the 

thickness of the hot shoe where you want the clip. 

The hole in the clip starter shows you when the 

correct depth is reached. Pull the shoe out, letting 

the tool fall out of your way and flatten the bulge of 

hot steel on the clip horn or anvil face. 


BLACKSMITH & KNIFEMAKER APRONS 

Blacksmith Aprons 

Leather Bib Apron 


Item # 

PTC-BA24 Pieh Knifemakers Bib Apron, 24” 

PTC-BA36 Pieh Bib Apron, 36” 

PTC-BA42 Pieh Bib Apron, 42” 

PTC-BAHP Add on of pockets 

Our oil tanned blacksmith apron will last you for 

many years to come! This is the highest quality 

blacksmith apron we offer. The apron will protect 

you while welding and forging. The leather is top 

quality, made from one piece and will soften with 

use. The length is measured from the top of the bib. 

Features: 

• Each back strap is adjustable with its own 

hook. There are two cross straps and one 

waist strap. No more difficult strap puzzles! 

• Strong stitching and rivets located at all the 

stress points. There is double riveting where 

the straps attach to the apron. 

• A divided and riveted chest pocket in the 

front for holding notes, pens, silver pencils, 

soap stone, etc. 

• 2 steel D-rings on each hip area for holding 

welding rods or tape measures, etc. 

• For an added fee, we can sew pockets on 

the front left and right hips. 

• Color: Chocolate 

Suede Blacksmith Welders 

Memphis Bib Apron 

Item # 

26BLA2436 Memphis Bib Apron, 36” 

26BLA2442 Memphis Bib Apron, 42” 

Chrome tanned to assure softness and durability 

while resisting heat, sparks, slag and cuts. Made 

with premium heavy side split cow leather. All seams 

are double lock stitched and sewn with DuPont 

KEVLAR® and Memphis Welding logo. Has a large 

front pocket and crossed back straps with quick 

release buckle and riveted in all major stress points. 

“D” rings hold accessories. Has anodized leather 

reinforced snaps to prevent arc flashback. 

Width 24”. New color: Pearl Grey. 

Pieh Knifemaker Apron 


Item # 

PTC-KM27 Pieh Flame Retardant 

Knifemaker’s Apron, 27” 

Our Flame Retardant Knifemaker Apron is made 

from Fyrguard fabric and is double layered. It will 

keep you safe while you work, even if sparks go 

down the bib. The apron is lined with fyrguard 

fabric as well. A length perfect for the knifemaker, 

not too long and not too short! Extends to mid thigh. 

Generous cotton waist tie allows ample adjustments 

for a variety of waist sizes. No pockets to catch 

grinder dust! Made in USA exclusively for the Pieh 

Legacy Collection. 

Features: 

• Adjustable neck strap (Polypropylene Strap 

with a Tri Glide buckle) 

• Cotton Waist Tie 

• Flame Retardant 

• Water and Mildew Resistant 

• Length: 27 inches 

• Width: 24 inches 

• Color: Olive 

Pieh Tool Blacksmith Bib Apron 

(inset shows Back) 

Memphis Bib Apron 

Pieh Tool Knifemaker Apron 

Pieh Tool Lap Apron 

and Belt detail 

Item # 

PTC-BALB Pieh Lap Apron with Buckle, 14” 

PTC-BALT Pieh Lap Apron with Ties, 14” 

Designed for the blacksmith, this style is especially 

nice when working at a bench or when a full apron 

can be too hot. This is a very durable apron, sure 

to withstand the abuse from metalworking! The 

leather is top quality, and will soften with use. It is 

made of heavy, oil tanned leather with riveted leather 

ties. Made in Camp Verde, Arizona exclusively for the 

Pieh Legacy Collection. 

• Available with ties or with a buckled belt. 

You may specify no front pocket. 

• The three section front pocket is convenient 

for holding a tape measure, note pad, soap 

stone, marking pencil, punches etc. 

• The apron measures 14” in length from the waist. 

• Riveted Belt and Pocket. 

• Color: Chocolate 



We customize each certificate for you! 

Have you considered 

taking our 

Blacksmith and 

Knifemaking Classes 

that we offer 

in Arizona? 

“The Bill Pieh 

Resource for 

Metalwork” 

See page 39 

Find Farrier Aprons 

on pages 27 and 28. 


GLOVES, GLASSES, HEARING 

Gloves 

Cotton 

Item # UM 

174 Hot Mill - Large, Men’s PR 

Have an outside layer of cotton to insure the proper 

amount of insulation and to protect against melting 

of synthetic fibers. Primarily used in applications 

involving heat. Layers create a natural insulating 

property. These gloves are sized larger to help in 

quick removal. White cotton banded top with knuckle 

strap. 

Kevlar 

KV28L Knit - Large, Men’s PR 

KV28S Knit - Small, Ladies PR 

Made to withstand cuts and burns. Not meant for high 

heat. Stretchy, not bulky so it is easy to see over your 

hand. 

KV62104 Jersey - Large, Men’s PR 

LKV62104 Jersey - Small, Ladies PR 

Great for ironwork and allows easy view of the projects 

you are working on. Has a cotton knit wrist. Made to 

withstand 400-450 degrees F. 

KVA65285 Hot Mill with Cuff - Large, PR 

Men’s 

LKVA65285 Hot Mill with Cuff - Small, PR 

Ladies 

Hot mill style with banded top cuff. Right and left hand. 

Made to withstand 750-800 degrees F. 

KV7244J Terry - Jumbo, Men’s PR 

LKV7244 Terry - Small, Ladies PR 

Great for ironwork and allows easy view of the 

projects you are working on. Has a knit wrist. Made 

to withstand 400-450 degrees F. 

Hearing Protection 

Radians 

Item # 

RB1150 Rad Band 

Unique banded hearing protection that slips on and 

off as needed. Light weight, durable construction. 

Supersoft Jelli ear plugs are washable, reusable and 

replaceable. Angle is engineered to align with ear canal 

for maximum comfort. Dielectric. 

CEP001-N Custom Molded Ear Plugs 

Easy, do-it-yourself kit, molds in 10 minutes. Dozens 

of everyday uses including blacksmithing, shooting 

sports, sporting events, construction, lawn care, 

assembly lines, farming, auto races, swimming, 

flying, factories and much more! 

• Soft, permanent custom fit 

• No mess 

• All day comfort 

• Simple, easy to follow instructions 

• Safe, non toxic and hypo-allergenic silicone 

• Environmentally friendly 

• Long lasting and washable 

• Made in the USA 

NRR 26 (Noise Reduction Rating) 

Cotton Hot Mill 

Kevlar Hot Mill 

Kevlar Knit 

Kevlar Terry 

Kevlar Jersey 

Radians Rad 

Band 

Ear Plugs 

Custom Molded 

Ear Plugs 

Safety Glasses 

Enhanced Didymium 

Item # 

9300 Standard Frame 

9305 Large Frame 

For metalsmiths and glass blowers. 

Larger frame fits over most glasses. 

Has a deep color with side shields for 

protection. 

Radians Coveralls 

CV0010 Clear 

These traditional-looking safety 

glasses offer outstanding vision 

protection. They combine safety and 

comfort at an economical price. Can 

be worn over prescription glasses. 

CLEAR - Allowing a maximum visible 

light transmission, this excellent safety 

lens is used for indoor applications 

where impact protection is required. 

Radians Revelations 

Rubber nose piece with ventilation 

channel between lens and frame reduces 

fogging. Telescoping temples offer 

superior fit. 99.9% UV Protection. 

RV0110ID Clear 

Allows maximum visible light 

transmission. 

RV0140ID Amber 

Ideal for low light environments; 

highlights and defines by blocking out 

blue light. 84% visible light transmission. 

RV0170ID Blue Mirror 

Dark tinted with a reflective coating for 

glare. 

RV0180ID Vermilion 

Blue blocking lens allows about 20% at 

transmission. For medium to bright 

conditions. 

RV01C0ID Copper 

Blue blocking lens allows about 20% 

visible light transmission. For medium 

to bright conditions. 

Radians C2 Bi-Focal 

Magnification diopter molded into the 

lens combines a protective safety 

glass with reading glasses. Soft, 

rubber nosepiece provides all day 

comfort with cushioned, non-slip 

rubber temple pads. Polycarbonate 

lens provides impact resistance 

Available in 4 Diopters. Clear lense 

with transparent smoke grey temples. 

All of Radians glasses are produced in 

ISO Certified facilities. They meet or 

exceed ANSI Z87.1 + standards and 

many styles have also been evaluated 

to Canadian Standards. 

C2-115 1.5 Diopter 




Didymium 

Standard Frame 

Didymium 

Large Frame 

Radians Coveralls 

Radians 

Revelations 

New Item! 

Bi-Focal 

Glasses from 

Radians 

Radians 

C2 Bi-Focal 


The Bill Pieh Resource for Metalwork 

The Bill Pieh Resource for Metalwork is a unique three-season metalworking school 

located in Camp Verde Arizona. Founded in 2003 by Pieh Tool Company, Inc., the 

school’s mission is to foster interest and knowledge in metalworking crafts. This unique 

school includes disciplines such as blacksmithing, bladesmithing and coppersmithing 

including chasing, repousse and raising. As Arizona’s only notable non-university 

metalworking school, the Bill Pieh Resource for Metalwork offers both beginner and 

advanced artists a variety of 3-day weekend courses and semi-annual demonstrations 

taught by some of North America’s finest metalsmiths. The programs are expanding and 

are updated on our website at www.piehtoolco.com. 

Come learn in an atmosphere of friendship and camaraderie! The creative energy and 

enthusiasm of the instructors provides adults and teenagers with unique skills and 

lasting memories. 

Blacksmithing Classes: 

Our 3-day blacksmithing classes with Gordon Williams are geared toward beginner, 

intermediate and advanced smiths. 

The beginner/intermediate course covers the basic & advanced aspects of 

blacksmithing including traditional joinery, forge welding, twisting, drawing, splitting, 

punching, drifting, riveting, scrolling, upsetting and tool making. Some students may also 

mig weld. You will use efficient propane forges, anvils, swage blocks, fullers, mandrels, 

a drill press, a Sahinler air hammer, treadle hammer, a Baldor Grinder/Sander, TW90 

Grinder and Milwaukee and Jet Power Tools. Each ten hour day begins with only an hour 

of lecture instruction in a shop setting. 

Then the fun begins! As the class progresses, students will use the techniques learned 

to create projects. Students will take home 6 to 12 finished projects! 

Classes of six students ensure individual attention. 

Each student is provided with their own forging station. All tools and materials are provided 

with the exception of required safety glasses, notebook and pen. Classes are 30+ hours. 

Cost: Please call or see our website for current fees. Fees are payable by 

cash, check, money order or credit card. 

Payment in full constitutes registration for a given class. 

Cancellation: $100 is non-refundable. Fees can be applied to another available 

class date with 14 days notice. 

Lodging: Pieh Tool Accommodations (928) 554-0700 

Comfort Inn of Camp Verde (928) 567-9000 

Days Inn (928) 567-3700 

Super 8 Motel (928) 567-2622 

Class Information: Classes are limited to 6 students. 

Airport Shuttle: Daily shuttle service available to/from Phoenix Sky Harbor Airport and 

Camp Verde. For information call 928-282-2066 or view their 

website at www.sedona-phoenix-shuttle.com. 

Instructor: 

Gordon Williams is a favorite demonstrator for 

the Arizona Artist Blacksmith Assoc. (AABA). The 

Upper Midwest Blacksmith Assoc. (UMBA) Library 

has an outstanding video available of Gordon 

demonstrating at the 2007 BAM conference. 

Williams is the proprietor of Victory Forge. He 

exhibits at several leading arts and crafts shows 

throughout USA educating the public with live 

demonstrations of the craft. 

As an instructor, Williams finds great joy in 

getting his students "fired up" and helping them 

unlock their artistic talents. A number of his 

past students have gone on to have successful 

businesses. Gordon likes to keep things lively 

and running in a fast paced manner! 

Make it a Family Vacation 

We are centrally located in Arizona 90 miles 

north of Phoenix and 58 miles south of Flagstaff. 

Area attractions include Sedona, the ghost town 

of Jerome & the Verde Canyon Railroad. See 

ancient Indian dwellings at Montezuma’s Castle. 

BLACKSMITH CLASSES 

Two fireplace sets forged using fullering tools. 

You too can learn this exciting craft! 

Williams showing technique. 

Learn to make beautiful pieces for 

your home or for SALE 

in your business! 

Learn how to make 

and texture leaves. 

Learn how to use the anvil 

horn to make scrolls. 


ANVILS 

Farrier Anvils 

All of our farrier anvils are made of cast steel in the USA. 

Cliff Carroll Anvils 


CCA35 35 lb 40 lb 

Similar to the 70 lb horseshoers anvil; it is used by ranches, hobbyists, and 

homeowners alike. Perfect for those needing a quality bench-top anvil which can 

be easily moved around the ranch, shop or garage. Has side turning cams. 

CCA70 70 lb 105 lb 

The 70 lb anvil is the most popular anvil designed to make horseshoeing faster and 

easier for the professional or the novice. Turning in heels or making square toes 

can be simple and amazingly precise using the side turning cams. The anvil heel is 

tapered for shaping up those small size 00-000 shoes. The anvil edges have been 

rounded to avoid chewing up the edges of the shoes while shaping them. The 70 lb 

anvil can handle draft shoes to pony shoes. 

CCA70W Wide Face, 70 lb 105 lb 

Same as the CCA70 Anvil with a wide face which features an extra wide 4” flat 

work surface that many farriers now prefer. 

CCA125 125 lb 160 lb 

This anvil is designed and built for heavier work such as draft horses, warmbloods 

and blacksmith work. The extra wide 4-3/4” x 14" flat work face also has a tapered 

heel with rounded edges. Turning cams on the side of the anvil are another 

innovation designed to make your job easier. 

TFS Anvils 

TFS has been in the anvil manufacturing business for several decades, providing 

quality anvils for the professional farrier, blacksmith, knife maker and hobbyist 

ranging in weight from 30 to 500 pounds. Hardened to 52-54 HRc and hand 

finished, ensuring the highest quality. 


TFS7LG65 Lil’ Giant, 65 lb 70 lb 

TFSF70 Farrier Model, 70 lb 105 lb 

TFSF125 Farrier Model, 125 lb 160 lb 

TFSC250 Competition Model, 250 lb 295 lb 

TFSF5 Future 5 w/Aluminum Base, 55 lb 60 lb 




JHM Anvils 

JHM anvils are tempered to a 48 Rockwell Hardness. Each JHM model is 

specifically designed to help professional farriers and blacksmiths face the 

various challenges of shoeing large as well as small hoof horses, whether in 

competition, at a customer’s location or in the shop. 


JHM70 Basic, 70 lb 105 lb 

Clip horn, 3” tapered heel. Turning cams at back of heel. 

JHM85 Bruce Daniels, 85 lb 120 lb 

Turning cams on side. 2-1/4” tapered heel. 

JHM100 Certifier, 100 lb 135 lb 

Clip horn, 3” tapered heel. Turning cams at back of heel. 

JHM125 Journeyman, 125 lb 160 lb 

JHM125TC Journeyman, 125 lb (with turning cams) 160 lb 

Specify Square Back or 3” tapered heel with OR without turning cams. 

(Specify right or left handed.) 

JHM160 Shaper, 160 lb 195 lb 

JHM260 Competitor, 260 lb 300 lb 

NC Anvils 


0207 Big Face, 70 lb 75 lb 

Anvil has a dual purpose hardie hole and side turning cams providing added 

shaping options. Opposing square & round clip horns allow you to make great 

clips and square toes. It also makes it more convenient for left handed shoers. 

0209 Cavalry, 112 lb 147 lb 

Heavy weight in efficiency and dependability, yet an easy traveler. Balanced 

alloyed casting. Has wide face with RH LH cliphorn. Thin heel design with 1-1/4” 

chamtered round turning hole and pritchel hole. May be ordered with round 

cliphorn on request. 

Cliff Carroll 

35 lb 

Cliff Carroll 

70 lb Wide Face 

TFS, Future 5 

TFS, Farrier 70 lb 

TFS, Competition 

JHM Basic 

JHM Bruce Daniels 

Cliff Carroll 

70 lb 

Cliff Carroll 

125 lb 

TFS Li’l Giant 

TFS, Future 4 

TFS, Future 3 

TFS, Future 1 

TFS, Farrier 125# 

More JHM photos 

next page 

JHM Certifier 

NC Big Face NC Cavalry 


ANVILS SPECIFICATIONS CHART 

ANVIL COMPARISON SPECIFICATIONS CHART 

Face Hardy Pritchel Rockwell 

Item # Mfg/Type Weight WxL Horn Length Height Hole(s) Hole(s) Base Hardness Material 

Farrier Anvils 

CCA35 Cliff Carroll 35 lb 2-7/8x9" 5" 14" 6 3/4" 7/8" 3/8" 6x7-1/4” 48 CS 

CCA70 Cliff Carroll/CH 70 lb 3x11" 9" 19" 9" 1" 3/8" 10-14” 48 CS 

CCA70W Cliff Carroll/CH 70 lb 4x11" 9" 19" 9" 1" 3/8" 9-3/4” 48 CS 

CCA125 Cliff Carroll/CH 125 lb 4-3/4x14" 10" 24" 10" 1" 1/2" 10-1/2” 48 CS 

TFSF5 Future 5 55 lb 4x10-3/4" 8-1/4" 19" 8-1/2" 1” 1/2” 9-1/4x11" 52 CS 

TFSF1 Future 1/CH 88 lb 3-1/4x14-3/4" 12-1/2" 27-1/4" 9-1/4" 1" 1/2" 7x15” 52 CS 

TFSF4 Future 4/CH 96 lb 4-1/4x17" 11" 28" 10-1/4" 1" 1/2" 7x15” 52 CS 

TFSF3 Future 3/CH 100 lb 4x16-3/4" 11" 27-3/4" 10-3/4" 1" 1/2" 7x15” 52 CS 

TFSF70 TFS/CH 70 lb 2-1/4x3-1/2" 9" 21" 7-3/4" 1” 1/2” 8-1/2x9-1/2" 52 CS 

TFSF125 TFS/CH 125 lb 4x17" 11" 28" 10-3/4" 1” 1/2” 8x10-3/4" 52 CS 

TFSC250 TFS 250 lb 5"x19-3/4" 12" 31-3/4" 12" 1” 1/2” 11-1/4x12" 52 CS 

JHM70 JHM/CH 70 lb 4x12" 8” 20-1/2” 8” 1” 1/2” 8x10" 48 CS 

JHM85 JHM 85 lb 3x12" 8” 19” 9-1/2” 1” 1/2” 9x11" 48 CS 

JHM100 JHM/CH 100 lb 4x16-1/2” 10-1/4” 26-1/2” 9-1/2” 1” 1/2” 9x11” 48 CS 

JHM125 JHM/CH 125 lb 4x17" 11” 27-1/4” 11” 1” 1/2” 9x11" 48 CS 

JHM160 JHM 160 lb 4-1/4x17-1/4” 12-3/4” 30” 11-1/2” 1” 1/2” 9x11-3/4” 48 CS 

JHM260 JHM 260 lb 5-1/8x20” 11” 31” 13-1/2” 1-1/4” 3/4” 11-1/4x12-1/4” 48 CS 

0207 NC Big Face/CH 70 lb 3-3/4x6” 3-1/2x8” 14” 8-3/4” 1” 1-1/4”, 3/8” 11x9” 48 CS 

0209 NC Cavalry/CH 112 lb 4-5/8x7” 4x9-1/2” 16-1/2” 11” 1” 1-1/4”, 3/8” 11x9” 48 CS 

Blacksmith Anvils 

Face Hardy Pritchel Rockwell 

Item # Mfg/Type Weight WxL Horn Length Height Hole(s) Hole(s) Base Hardness Material 

308000020 Peddinghaus 44 lb 3-1/8x11” 4-1/3” 15-1/3” 6-1/10” 7/8” 3/4” 5-1/2x6-1/2” 54 DF 

308000035 Peddinghaus 77 lb 3-3/4x13-2/5” 5-1/3” 18-3/4” 7-7/8” 7/8” 3/4” 6-3/4x7-3/4” 54 DF 

308000050 Peddinghaus 110 lb 4-1/3x15-1/3” 6-1/3” 21-5/8” 8-5/8” 1” 7/8” 8-1/4x9-7/8” 54 DF 

308000075 Peddinghaus 165 lb 5x17-1/3” 7-1/4” 24-5/8” 10-7/16” 1” 7/8” 9-1/4x10-13/16” 54 DF 

14165 Ridgid P5/DH 77 lb 3-3/4x8" 5-1/2" 18-3/4" 8” 3/4" No 6-3/4x7-3/4” 52 DF C45 

14169 Ridgid P9/DH 165 lb 5x10-1/2" 7-1/2" 25" 10-1/2" 1" 7/8" 9-1/4x11” 52 DF C45 

14190 Ridgid P12/DH 275 lb 5-1/4x12" 8-1/2" 28-1/2" 12-1/4" 1" 7/8" 10-3/4x13-1/2” 52 DF C45 

TFS7LG65 TFS Lit’l Giant 65 lb 4x10-3/4" 4x8-1/4" 8” 8” 1" 1/2" 9-1/4x11” 52 CS 

TFSF2 Future 2/CH 96 lb 4-1/4x16" 11" 27" 10” 1" 1/2" 7x15” 52 CS 

TFSSB1 TFS 100 lb 4x14" 4x9" 23" 8-1/2" 1” 1/2” 7-3/4x11" 52 CS 

TFSSB150 TFS 150 lb 4x16-1/2" 4x10" 26-1/2" 10" 1” 1/2” 8x11-3/4" 52 CS 

TFSSB200 TFS 200 lb 4-3/4x18-1/4" 4-3/4x11-1/4" 29-1/2 10-3/4" 1” 1/2” 8-1/4x11-3/4" 52 CS 

TFSSB300 TFS 300 lb 5-1/4x19-3/4" 5-1/4x12" 31-3/4" 12” 1” 1/2” 10x12-3/4" 52 CS 

TFSDH1 TFS/DH 100 lb 4x17" 4x9-1/4" 30-1/4" 8-1/2" 1" 1/2" 7-3/4x11” 52 CS 

TFSDH2 TFS Smithy 2/DH 200 lb 5x21" 5x9" 30" 10-1/4" 1" 7/8" 9-3/4x12-1/2” 52 CS 

TFSDH3 TFS Smithy 3/DH 300 lb 5-1/2x22" 5-1/2x11-1/4" 33-1/4" 11-1/4" 1" 7/8" 9-1/2x12-3/4” 52 CS 

TFSDH4 TFS Smithy 4/DH 400 lb 6-1/2x25-1/2” 6x12” 37-1/2” 13-1/4” 1” 7/8” 12-3/4x13-3/4” 52 CS 

Silversmith Anvil 

0099010000 Peddinghaus 1 lb 1x1-5/8” 1-1/8” 4-1/4” 1-5/8” No No CP 

CH = Clip Horn CP = Chromium Plated CS = Cast Steel DH = Double Horn DF = Dropped Forge WF = Wide Face 

*Anvils weighing 70 lbs are shipped UPS Ground, over 70 lbs by motor freight, as a general rule. 

JHM Journeyman 125 lb 

Tapered Heel with Cams 

JHM Journeyman 125 lb 

Square Back 

JHM Shaper 160 lb JHM Competitor 260 lb 

Peddinghaus Silversmith’s 

Bench Anvil 


ANVILS, STALL JACKS, BENCHES 

Silversmith Anvil 

Item # See anvil photo on page 41. Ship Wt. 

0099010000 Peddinghaus Silversmith Anvil (500g), 1.1 lb 2 lb 

This anvil has one half-round surface and one flat surface for a variety of metal-forming applications. Can be attached to 

a bench through bottom holes. Chromium Plated. Face Width: 1”, Height: 1-5/8”, Length: 4.3”. 

Blacksmith Anvils 

Peddinghaus-Durlach 

New from Peddinghaus Handwerkzeuge of Germany! The only anvils made by Peddinghaus! They are drop-forged from 

high grade steel. Available only in a double horn pattern. Hardened to 54-62 HRc. Round horn is slightly flat on top. 

3080000020 Double Horn (20 kg), 44 lb 49 lb 




Ridgid-Peddinghaus, Belgium 

These Peddinghaus anvils are made by Ridgid Europe. They are high grade steel and are drop forged in Belgium. 

Available only in a double horn pattern at this time. Made from C45 steel and hardened to 52-54 HRc. 

14165 Double Horn P5, 77 lb 82 lb 

14169 Double Horn P9, 165 lb 210 lb 

14190 

TFS 

Double Horn P12, 275 lb 320 lb 

TFS has been in the anvil manufacturing business several decades, providing quality anvils for professional farriers, 

blacksmiths, knifemakers and hobbyists ranging in weight from 30 to 500 lbs. Hardened to 52-54 HRc and hand 

finished ensuring the highest quality. 

SINGLE HORN 


TFSSB1 Blacksmith Model, 100 lb 145 lb 





TFSSB500 Blacksmith Model, 500 lb *S/O 545 lb 

DOUBLE HORN 

TFSDH1 Blacksmith Model, 100 lb 145 lb 

TFSDH2 Smithy 2, 200 lb 245 lb 



TFS Smithy Anvils are the first cast American made anvil with an upsetting block and offset table on the horn. In the 

past, only the 275 lb Peddinghaus Ridgid anvil offered an upsetting block. 

Stall Jacks 

TFS-HAJ TFS Hitch Anvil *S/O 33 lb 

This anvil conveniently attaches to any standard trailer hitch. Face: 4”x10”, Horn: 3.5”x4.5”; Height: 12”; Base: Standard Hitch. 

ANVSJS Valley Stall Jack, Standard 21 lb 

Distance between cams: 1-1/2”, Height: 16-3/4”, Face width: 4”, Working Face length: 5”, Over all length: 6“. 

ANVSJT Valley Stall Jack, Tall 18 lb 

Distance between cams: 1-1/2”, Height: 22”, Face width: 4”, Working Face length: 5 “, OAL: 6”. Our stall jacks are used by 

farriers for a lightweight sturdy alternative to an anvil. The tripod legs are perfect for areas where the ground is uneven. The Valley 

Stall Jack is made of 4142 steel and has a black painted finish. The working face is polished. Can be used for cold or hot shoeing. 

Anvil Benches and Stands 

TFSTP TFS Tri-Pod Aluminum Stand 23 lb 

Designed specifically for TFS Future Anvils. Table: 16" x 22", Height: 26.5" 

CCAST Cliff Carroll Anvil Stump 41 lb/70 lb Oversized 

The Anvil Stump's light weight, adjustable aluminum legs make packing up and moving to the next stable a breeze. 

You don't have to bolt or chain it to keep it where it needs to be! Just drop your anvil between four aluminum anvil 

lugs. Your elbow will thank you. Legs adjust from 24” to 29”. 

GPBLK GFS Power Block 50 lb/70 lb Oversized 

The Power Block anvil stand features a 12x19" laminated wood block that gives you plenty of work space and 

significantly reduces noise and vibration. An additional shelf has three holes for holding hammers and tongs. The 

adjustable aluminum legs in a tri-pod configuration offer excellent stability and adjust the total height from 21" to 27". 

The optional vise mounts to the block and is easily removed for storage. 


TFS Tri-Pod 

Anvil Stand 

GFS Power 

Block 

Cliff Carroll 

Anvil Stump 

TFS Hitch Anvil 

Peddinghaus 

Double Horn, 110 lb 

Peddinghaus (Ridgid) 

Double Horn, 275 lb 

TFS Future 2 

TFS Blacksmith 

TFS Blacksmith Double Horn 

TFS Smithy 

Valley Tall 

Stall Jack 


Wilton 

Shop Vise 

NC Folding 

Stand with Vise 

Cliff Carroll 

Folding Stand with Vise 

Valley 36” 

Gooseneck Vise 

& Stand 

Wilton 

Multi-Purpose Vise 

Model Drill Press Vise 

ANVIL STANDS, VISES 

Anvil Stands (continued) 


NCST NC Folding Stand with Foot Spring Vise 38 lb 

Hand crank anvil lock down accommodates many American made anvils. Bench and legs are 

constructed of tough 1-1/4” 14 gauge tubular steel. Will stand up under heavy use for many years. 

Quickly folds down to just 7” high. “Quick mount” step vise mounts in just seconds without fasteners. 

Made in USA. Height: 24”, Width: 10”, Length: 30”. 

CCASV Cliff Carroll Anvil Stand with Vise 42 lb 

CCS Cliff Carroll Anvil Stand 38 lb 

CCV Cliff Carroll Vise 12 lb 

Custom built, strong and sturdy. Fits many different styles and makes of anvils. Equipped with a handy holder for 

tongs and a hardy. Vise has instant lockdown and release with 200 lbs. of pressure for a secure hold. Made in USA. 

Vises 

Valley Farrier Vises 


ABV14 Farrier’s Gooseneck Vise, 14” (Mounts to truck tailgate.) 15 lb 

ABV36 Farrier’s Gooseneck Vise, 36” (Fits on Tripod Base) 19 lb 

The Valley vise has the perfect design for holding a horseshoe while you shape it up. Optional stand 

available. One can be attached to a tailgate, the other the Tripod Vise Base or any bench. 

TVB Tripod Vise Base (for 14” Vise) 16 lb 

Wilton Mechanic’s Vises 

Wilton Mechanics Vises have a powder coated heavy-duty 30,000 PSI castings, built for rugged use and 

extended life. They feature a 360° rotating swivel base, double lock downs to ensure stability and a large 

anvil work surface. Lifetime lubrication means the grease is permanently sealed in for trouble-free service. 

Lifetime Warranty. Made in USA. 


21400 Wilton 745, 740 Series Mechanic’s Vise, 5” 53 lb 

21500 Wilton 746, 740 Series Mechanic’s Vise, 6” 69 lb 

Specifications Wilton 745,740 Series Wilton 746,740 Series 

Jaw Width 5” 6” 

Jaw Opening 5 1/4” 5 1/4” 

Throat Depth 3 3/4” 3 3/4” 

Height 9 1/2” 10 3/4” 

Width 10” 11” 

Length 15 3/4” 17” 

Opening Capacity 5 1/4” 5 3/4” 

Pipe Jaw Capacity 1/4 - 2 1/2” 1/4 - 3 1/2” 

Type of Nut Straight Line Pull Straight Line Pull 

Height: 8 3/4” 

Width: 10” 

Length: 19” 

Jaw Width: 5” 

Opening Capacity: 5-1/4” 

Pipe Jaw Capacity: 3/8” - 3” 

Throat Depth: 3” 

Type of Nut: Center 

7465 740 Series Wilton 

Mechanic’s Vise 

Wilton Drill Press Vise 


63238 Wilton Model 1335 Drill Press Vise, 3” 6 lb 

Made from high grade cast iron with a ground vise bed for smooth jaw movement. 

Hardened top V-groove jaws with a large workload capacity. Vise has a stationary 

base. Lifetime Warranty. Made in USA. 

746, 740 Series Wilton 

Mechanic’s Vise 

Wilton Multi-Purpose Vise 


69999 Wilton Multi-Purpose Vise, 5” 46 lb 

Features a rotating head for clamping material at any angle and indexed at 90° left and right for quick 

setup. V-jaw holds 1” - 3” diameter round stock vertically. The large built-in anvil is useful for flat shaping. 

Includes rubber pinch point safety guards and a positive locking 360° swivel base. The permanent pipe 

jaws with replaceable serrated jaw faces. Lifetime Warranty. Made in USA. 

Specifications WS5, Shop Vise WS6, Shop Vise 

Jaw Width 5” 6” 

Jaw Opening 5” 3 1/2” 

Throat Depth 3” 3 3/4” 

Height 8 1/2”” 10 3/4” 

Width 8 5/8” 11” 

Length 15 1/2” 17” 

Opening Capacity 5” 5 3/4” 

Pipe Jaw Capacity 5/8” - 2 3/8” 1/4 - 3 1/2” 

Type of Nut Straight Line Pull Straight Line Pull 

Height: 3.2” 

Width: 5.1” 

Length: 8.5” 

Jaw Depth: 1 7/8” 

Jaw Width: 3” 

Opening Capacity: 2-3/4” 

Type of Nut: Contin 

Wilton Shop Vises 

Features a heavy-duty castings with a 30,000 PSI ductile iron body 

built for rugged use and extended life. Includes a large anvil work 

surface with rubber pinch point safety guards and the capability 

of handling various sizes of pipe. Three mounting posts provide a 

stable secure hold. Has replaceable serrated top jaws and a 360° 

swivel base with double lockdown for easy positioning. For general 

duty applications. Lifetime Warranty. Made in USA. 


63301 WS5, Shop Vise, 5” 30 lb 

63302 WS6, Shop Vise, 6” 46 lb 


ERGONOMIC FORGING HAMMERS 

Ergonomic Forging Hammers 

The Ergonomic Hammer is designed to move metal fast. Its 

compact head allows the hammer to be worked at extreme angles. 

The Pieh Tool Ergonomic Hammers are well balanced and made 

from 4142 tool steel and hardened to a Rockwell 52. 

Made in the USA for the Pieh Legacy Collection TM . 

Pieh Tool Rounding Ergonomic Hammer 

The Pieh Tool Rounding Ergonomic Hammer is designed to move metal fast. 

Its compact head allows the hammer to be worked at extreme angles. 

Item # 

PTRH2.0 Pieh Rounding Ergonomic Hammer, 2 lb 

PTRH2.5 Pieh Rounding Ergonomic Hammer, 2.5 lb 

PTRH3.5 Pieh Rounding Ergonomic Hammer, 3.5 lb 

PTRH4.0 Pieh Rounding Ergonomic Hammer, 4 lb 

Pieh Tool Cross Pein Ergonomic Hammer 

Pieh Tool Cross Pein Ergonomic Hammers are perfect for the blacksmith or 

knifemaker. The broad pein allows for better fullering. 

PTCP1.5 Pieh Cross Pein Ergonomic Hammer, 1.5 lb 




Pieh Tool Straight Pein Ergonomic Hammer 

Pieh Tool Straight Pein Ergonomic Hammers are the perfect choice for the 

blacksmith or knifemaker. The broad pein allows for better fullering. 

PTSP1.5 Pieh Straight Pein Ergonomic Hammer, 1.5 lb 



Pieh Tool Diagonal Pein Ergonomic Hammer 

The Pieh Tool Diagonal Pien Ergonomic hammers come in Left or Right 

handed styles. These hammers are perfect for the blacksmith or knifemaker. 

The broad pein allows for better fullering. Diagonal pein hammers are 

preferred by many because the pein is already positioned at a comfortable 

angle to make forging easier! Its compact head allows the hammer to be 

worked at extreme angles using the edge of the face to fuller. 

PTDP2.5-R Pieh Diagonal Pein Ergonomic Hammer, RH 2.5 lb 

PTDP2.5-L Pieh Diagonal Pein Ergonomic Hammer, LH 2.5 lb 

Big Blu Cross Pein Forging Hammer 

Using this hammer in the proper way saves energy, power and time while at the 

same time keeping the body from damage (muscles, nerves, joints and bones). 

Item # 

HCPH1 Big Blu Ergonomic, 1.5 lb 




Big Blu Straight Pein Forging Hammer 

Big Blu straight pein hammers are ergonomically designed to work with 

the natural movements of the body. Made from top quality forged and heat 

treated tool steel. Finished and fitted with a shock mounted wood handle. 

HSPH9 Big Blu Ergonomic, 2.6 lb 

HSPH10 Big Blu Ergonomic, 3.5 lb 

Big Blu Diagonal Pein Hammer 

The diagonal pein hammers are great to use as the hammer’s pein is already positioned 

to make forging easier! They come in left or right handed. Made from top quality forged 

and heat treated tool steel. Finished and fitted with a shock mounted wood handle. 

HDPH7 Big Blu Ergonomic, RH Hammer, 2.6 lb 

HDPH8 Big Blu Ergonomic, LH Hammer, 2.6 lb 

Big Blu Rounding Hammer 

Made from top quality forged and heat treated tool steel they are finished 

and fitted with a shock mounted wood handle. 

HRDH5 Big Blu Ergonomic, 2.6 lb 

HRDH6 Big Blu Ergonomic, 3.7 lb 

Pieh Rounding, 2 lb 

Pieh Cross 

Pein, 1.5 lb 

Pieh Straight 

Pein, 2.5 lb 

Pieh Diagonal Pein 

The Ergonomic Hammers are 

especially designed to work with the 

natural movements of the body and 

there is a proper technique. 

See Forging Solutions Video by 

Har-lev #DVD50, page 126. 

Straight Pein 

Rounding 

The essential part of a hammer is the 

head, a compact solid mass that is 

able to deliver the blow to the intended 

target without itself deforming. The 

opposite or back side has a cross, 

diagonal or straight pein (peen). 

Like all hand forged items, each 

is unique and the 

overall weight and shape will 

vary slightly. 

Diagonal 

Pein 

(Back) 

Each of our handles are 

ground and fit from straight 

grain aged hickory and then 

stained. The hammer handle 

is glued using a modern 

Polyurethane adhesive. 

This has the advantage of 

being able to flex during 

humidity and temperature 

changes which should give 

you many years of trouble 

free performance without the 

head loosening. You should 

always take the time to fit the 

handle to your hand. 

*Tip: If you should break 

a handle simply heat the 

hammer at the cheeks 

slowly and carefully and 

then the old handle can be 

removed. 

Cross Pein 

Diagonal Pein 

Photos of hammers by Big Blu. 

Big Blu Hammers are hand forged in the USA. 


Rounding Hammers 


The Pieh Tool Standard Rounding Hammer is for 

professional farriers and blacksmiths alike. The short 

faces allow for great balance. These traditional flat/ 

rounded face hammers are hand forged from 4340 

tool steel, precision ground, painstakingly heat treated 

for a consistent and safe forging hammer. The hammer 

handle is glued using Polyurethane adhesive, having 

the advantage of being able to flex during humidity 

and temperature changes giving you many years of 

trouble-free performance without the head loosening. 

You should always take the time to fit the 

handle to your hand. Like all hand forged items, each 

is unique and the overall weight and shape will vary 

slightly. Made in USA for the Pieh Legacy Collection. 

Pieh Standard Rounding 

Item # 

PTSTD.RH1.5 1.5 lb 



Diamond Rounding 

60 24 oz 

61B 36 oz 

Balanced, with one round crowned face and one flat 

face beveled face with hickory handle. 

Blurton Rounding 

JBRH2 32 oz 

JBRH2.5 40 oz 

Balanced and made from shock-resistant tool steel. 

Flatland Forge Rounding 

1.75LB 28 oz 

2LB 32 oz 

Hardened on the striking end, soft through body. 

Nordic Forge Rounding 

286HT Viking 24 oz 

285HT Viking 32 oz 

Precision machined striking ends for superior finish. 

Chamfers are rounded to help prevent chipping. Has 

new burnt and buffed handle for that “soft” feel. 

Ball Pein Hammers 

Flatland Forge Ball Pein 

Item # 

BPH1 Clipping, 2 lb 

Peddinghaus Engineers Ball Pein 

5081030250 100g (4 oz) 

5081030500 225g (8 oz) 

5081030750 340g (12 oz) 

5081031000 450g (16 oz) 

5081031500 675g (24 oz) 

5081032000 900g (32 oz) 

Straight Pein Hammer 


The Pieh Tool Standard Straight-Pein is an evolution 

of the ergonomic straight pein hammer. The head 

of the hammer uses a standard size eye which 

concentrates the hammer’s weight around the center 

rather then the ends. This style of hammer is equally 

weighted on both ends to allow effortless switching 

from face to pein. By keeping the overall length of 

the hammer short this hammer is extremely well 

balanced with a less bulky handle. Made from 4340, 

hand forged and heat treated. Made in USA for the 


Pieh Standard Straight Pein 

Item # 

PTSTD.SP1.5 1.5 lb 

PTSTD.SP2.5 2.5 lb 


Diamond 24 oz 

Diamond 36 oz 

Blurton 

Flatland 

Nordic Viking 24 oz 

Nordic Viking 32 oz 

Flatland Ball Pein 

Peddinghaus 

Ball Pein 

Engineers 


Straight Pein 

HAMMERS 

Cross Pein Hammers 


The Pieh Tool Standard Cross-Pein is an evolution of 

the ergonomic cross pein hammer. The head of the 

hammer uses a standard size eye which concentrates 

the hammers weight around the center rather then 

the ends. In addition this style of hammer is equally 

weighted on both ends to allow effortless switching 

from face to pein. By keeping the overall length of the 

hammer short we have developed a hammer that is 

extremely well balanced yet has the benefit of having 

a less bulky handle. This hammer is made from 4340, 

hand forged and heat treated. Made in USA for the 


Pieh Standard Cross Pein 

Item # 

PTSTD.CP1.5 1.5 lb 

PTSTD.CP2.5 2.5 lb 

Blurton 

JBCH Farriers, 38 oz 

Plumb 

11524 40 oz 

Peddinghaus 

Swedish Pattern Cross Pein 

5044031000 1000g (2.2 lb) 

5044031500 1500g (3.3 lb) 

French Pattern Cross Pein 

5029020400 400g (14 oz) 

5029020500 500g (18 oz) 

5029020600 600g (21 oz) 

5029020800 800g (28 oz) 

5029021000 1000g (35 oz) 

5029021500 1500g (3.3 lb) 

5029022000 2000g (4.4 lb) 

German Pattern Cross Pein 

5039020600 600g (21 oz) 

5039020800 800g (28 oz) 

5039021000 1000g (2.2 lb) 

5039021500 1500g (3.3 lb) 

5039022000 2000g (4.4 lb) 

w/Ultramid/Ultratec Handles 

5042040300 Ultramid, 300g (11 oz) 

5042980200 Ultratec, 200g (8 oz) 

5039980400 Ultratec, 400g (16 oz) *S/O 



5039981000 Ultratec, 1000g (2.2 lb) *S/O 

50399820500 Ultratec, 2000g (4.4 lb) *S/O 

Picard 

German Pattern Cross Pein 

PCPH500 500g (18 oz) Dressed 

PCPH1K 1000g (35 oz) Dressed 

PCPH 1500g (3.3 lb) Dressed 

PCPH-U 1500g (3.3 lb) Not Dressed 

The 1500g hammer has a very stout head. 

Peddinghaus 

Engineers Cross Pein 

5079020750 340g (12 oz) 

5079021000 450g (16 oz) 

5079031125 500g (18 oz) 

*Tip: If you should break a handle 

simply heat the hammer 

at the cheeks slowly and carefully 

remove the old handle. 



Blurton 

Plumb 

Peddinghaus 

Swedish Pattern 

Peddinghaus 

French Pattern 

Peddinghaus 

German Pattern 

Peddinghaus 

German Pattern 

Ultramid Handle 

500g 

1500g 

Picard Dressed 

Peddinghaus 

Engineers

HAMMERS, SLEDGES, MALLETS 

Sledges 

Peddinghaus 

Straight Pein 

Item # 

5028025000 5000g (11 lb) 

Cross Pein 

5027023000 3000g (6.6 lb) 

5027025000 5000g (11 lb) 

Double Face 

5293021000 1000g (2.2 lb) 

5293021250 1250g (2.5 lb) 

5293021500 1500g (3.3 lb) 

5293022000 2000g (4.4 lb) 

5293023000 3000g (6.6 lb) 

5247021000 Dutch, 1000g (2.2 lb) 

5247021250 Dutch, 1250g (2.5 lb) 

Dutch Pattern 

Mallets 

Hickory 

Item # 

12002 #2 (2-1/4 x 5) 

12003 #3 (2-1/2 x 5-1/2) 

12004 #4 (2-3/4 x 6) 

Precision-turned, hardwood heads. 

Rawhide 

11000 #0 (1 x 2) 

11002 #2 (1-1/2 x 3) 

11004 #4 (2 x 3-1/2) 

11006 #6 (2-3/4 x 4-3/4) 

Made of tough, long-wearing, water 

buffalo rawhide. Non-marring. 

Double Face 

Sledge 1000-2000g 

Hickory 

Mallet 

Straight Pein 

Sledge 

Cross 

Pein 

Sledge 

Double 

Face 

Sledge 

3000g 

Split Head Hammers 

The split-head hammer has replaceable faces. Rawhide 

face is non-marring. 

Item # Wt. 

31001 Rawhide #1 (1-1/4 x 3-7/8) 24 oz 

31002 Rawhide #2 (1-1/2 x 4-1/2) 32 oz 

31003 Rawhide #3 (1-3/4 x 4-3/4) 44 oz 

31004 Rawhide #4 (2 x 5-3/8) 64 oz 

31005 Rawhide #5 (2-3/4 x 5-3/4) 104 oz 

Replacement Parts Wt. U/M 

21001 Rawhide Faces #1 (1-1/4) 2.5 oz PR 

21002 Rawhide Faces #2 (1-1/2) 4 oz PR 

21003 Rawhide Faces #3 (1-3/4) 5.3 oz PR 

21004 Rawhide Faces #4 (2) 8 oz PR 

21005 Rawhide Faces #5 (2-3/4) 32 oz PR 

Split Head Hammer 


Split Head 

Face 

Rawhide 

Mallet 

Farrier Driving Hammers 

NC 

Item # 

0751 12 oz 

0749 14 oz 

Balanced claw design with slim handles for 

smooth strokes. Made from high-grade impact 

tool steel. 

Blurton 

JBDH8 8 oz 

JBDH10 10 oz 

JBDH12 12 oz 

JBDH14 14 oz 

Balanced head gives more confidence and better 

feel. This hammer is well-balanced and features 

claws designed to easily wring nails. Made from a 

high-grade, shock resistant tool steel, it will provide 

years of service. 

Flatland Forge 

DH8 8 oz 

DH10 10 oz 

Well-balanced and featuring claws. Shock 

resistant steel. Flatland Forge tools are made 

of S-7, shock resistant air hardened tool steel. 

Diamond 

FH10 Race Track 10 oz 

FH14 14 oz 

Hammers are forged from high quality steel. 

Hardwood handles. 

Bellota 

BDH6 6 oz 

Race track weight balanced to drive larger 

nails. 

Horsehead 

HHDH8 8 oz 

HHDH12 12 oz 

Perfectly balanced and will ring and drive nails 

with ease. The octagonal serrated face prevents 

slippage. It has a good gap on the claw making 

the farrier’s job easier. 

Pocket Pal 

9” Oval 

Ceramic 

Sharpening 

Rod 

Billy Fire Tongs 

Diamond 10 oz 

Diamond 14 oz 


Cavalry 

Blurton 

Flatland 

Bellota 

Horsehead 

Pieh Tool has Farrier Tongs on page 56 & 57. 

We have added several sharpening tools on page 61. 

Farrier Aprons are on pages 28 and 29. 

Carbide 

Sharpener

SPECIALTY HAMMERS, LAPIDARY 

Speciality Hammers 

Goldsmith Hammer 

Item # Hammer Wt. 

0100020000 Peddinghaus Goldsmith, 80g (3 oz) *S/O 0.30 lb 

For working jewelers and metalsmiths. Head is forged for superior durability of high grade steel and is 

fully polished. Made in Germany. 

Boiler Maker/Planishing Hammer 

0078020800 Peddinghaus Boiler Maker, 800g (85, 95, 27mm - Dull Polished) *S/O 1.75 lb 

Copper Hammer 

5065031500 Peddinghaus Copper, 1500g (Has a sledge shape.) *S/O 3.30 lb 

Brass Hammers 

The brass hammer cuts heels off horseshoes clean with no damage to hardies. The 2 lb hammer is best 

for lighter shoes; 3 lb for saddle horses. Perfect for driving in studs! Fit with a custom handle. 

CCBH2 Cliff Carroll, Double Face 2.00 lb 

CCBH3 Cliff Carroll, Double Face 3.00 lb 


Lapidary Big Blue 

Rock Pick 

Lapidary Rock Pick 

(Pointed Tip) 

Geological & Lapidary Tools 

Item # Wt. 

E6-22BLC Estwing Lapidary Big Blue Rock Pick (Chisel Edge), 13” 2.25 lb 

The Estwing Lapidary Rock Pick with chisel edge features a 1” square hammer surface. This allows for 

greater striking power. Hammer with chisel edge features a 1” square hammer surface for greater striking 

power. Has a nylon shock reduction grip with an all metal construction. Perfect for collecting fossils and 

splitting bedded sedimentary rocks. The chisel blade is 1-1/2” wide with a 7” long and 20 oz. 

E3-22P Estwing Lapidary Rock Pick (Pointed Tip), 13” 2.10 lb 

One of the most popular Estwing hammers on the market, the Estwing Lapidary Rock Pick features a 

shock-reduction grip, forged handle and head, cushion grip for extra comfort and a medium-heavy weight. 

One of the best hammers available for hard rock work. Fully polished solid steel with the Estwing shock 

absorbing nylon-vinyl grip. Head weight is 22 oz. with 7” length. 

GP-100 Estwing Geo/Paleo Lapidary Pick, 25” 4.00 lb 

The Estwing Geo Lapidary Pick is the perfect tool for all geological and paleo digs! Features include a 

durable powder-coated finish and a textured vinyl grip. Axe head is 14” wide (from pointed edge to chisel edge). 

E44A Estwing Campers Axe, 16” with Sheath 

The Estwing camper’s axe is ideal for camping, hunting and farm use. It has a forged steel head with a 

steel handle. The 4” cutting edge makes a deep fast cut. Includes a leather sheath. Lightweight but tough 

for cutting and chopping small to medium size wood and branches for fire wood! Protect your eyes from 

flying particles and dust. Always wear safety goggles. Bystanders should also wear safety goggles. 

* Great for use on camping trips! 

12-12 Steel Gold Pan, 12” 12 oz 

The Estwing gold pan has creases for thorough separation with a convenient lanyard hole for easy carrying. 



Estwing Geo/Paleo 

Lapidary Pick 


www.piehtoolco.com � Fax 928-554-0800 � Phone 1-928-554-0700 


Goldsmith Hammer 

Boiler Maker 

Planishing 

Hammer 

Copper Hammer 

Brass Hammer 

Estwing Camper’s Axe 

Steel Gold Pan 


HANDLES, CONICALS 

Handles and Parts (For Hammers and Tools) 

Handles 

Item # Handle Wt. 

51000 Mallet #0, 8" rawhide, bossing, hickory heads 1 oz 

51002 Mallet #2, 10" rawhide, bossing, hickory heads 2.5 oz 





53001 Split Head #1, 11" 4 oz 

53002 Split Head #2, 12.5" 5 oz 

52003 Split Head #3, 12.75" 6 oz 

53004 Split Head #4, 14" 7 oz 

53005 Split Head #5, 16" 8 oz 

31036 36" Sledge Hammer Handle (for #5 Split Head Hammer) 

7050441500 Peddinghaus, 1000-1500g Swedish, Hickory 

7005518400 Peddinghaus, 500g German, Ultramid (Red) 

7000538800 Peddinghaus, 600g German/French, Hickory 

7000538100 Peddinghaus, 300g German/French, Ash 


7000538500 Peddinghaus, 400-500g German/French, Ash 

7000538700 Peddinghaus, 600g German/French, Ash 





7000546100 Peddinghaus, 3000g Sledges, Ash 

7000546200 Peddinghaus, 3000g Sledges, Hickory 


7000546400 Peddinghaus, 5000g Sledges, Hickory 

7000548500 Peddinghaus, 340g Engineers Pein, Ash 

7000548600 Peddinghaus, 340g Engineers Pein, Hickory 

7000548800 Peddinghaus, 450-500g Engineers Pein, Hickory 




7001510100 Peddinghaus, Top Fullers Swages, Ash 

CHANDLEM Cliff Carroll, Medium Hickory 

CHANDLEL Cliff Carroll, Large Hickory 

Fits Brass, Champion & Other 2-3 lb Rounding Hammers. 

JBDHH Blurton, Driving 

JBRCHH Blurton, Rounding and Cross Pein 

FFDHH Flatland Forge Driving Hammer 

Fits all sizes of the Flatland (Jim Poor) driving hammers. 

0743B NC, for 12 oz Cavalry Driving 

0743C NC, for 14 oz Cavalry Driving 

HHDH-6 Horse Head Handle, 6 oz 



Conical Hammer Wedges 

Item # 

7112775300 Peddinghaus, 7mm 








Mallet Replacement Handle 

Peddinghaus Handle 

Flatland Forge Handle 

Horse Head Handle 

The best method for removing a hammer handle 

is to saw the old handle off, flip the head upside 

down, then use a drift (a little under the size of 

the old hammer eye) to punch the old hammer 

handle down and out of the top. Wedges are not 

included, and must be ordered separately. 

Axe Handles 

Since hickory is a natural product, traditionally, 

handles have fallen into different grades 

according to density, freedom from defects, 

color and grain. The three basic grades are 

Grade A, B and C. The 14” handles are Grade 

AAW (the best available) - Choicest selection of 

heavyweight, all-white hickory with a wax finish. 

These handles comes with single-use wood 

wedge kit for securing the head to handle. 

Item # 

10314-AAW Hunter’s Axe Handle, 14” 

10114 Scout Axe Handle, 14” 

10918-8 Tomahawk Handle, 18” 

The tomahawk handle is Grade BR, Hickory; Fire 

finished and lacquered. 

Hunter’s Axe handle 

Scout’s Axe handle 

Tool Lock 

Top Tool Lock 

Item # 

WTTL Top Tool Lock (pkg of 2) 

Used for securing the heads of top anvil tools (or 

any wooden handled tool). Fit the tool head on the 

handle and burn a 3/8” groove in the handle. Install 

the wood screws, the tool head and bend the top of 

the tool lock out and cut it off flush with the edge of 

the tool handle. Now your tool head is secure! 

More Peddinghaus handles are available by Special Order. Please call for assistance! 

We are proud to offer you Peddinghaus tools! The Peddinghaus hammers listed in our catalog are made in Germany or France for 

blacksmiths, working jewelers and other metalsmiths. Heads are forged for superior durability. All meet ISO and DIN standards. They are 

made of high grade steel and are the most reliable hammers you’ll find anywhere. All hammers feature finely balanced heads for an easy 

accurate swing. Handles are smooth and of ash or hickory for a comfortable grip. 


Chasing 

Raising 300g 

Picard Chasing 

Repousse 

Chasing 

Raising 400g 

#403.02 

Single Face 

Polishing 

Polishing 

Double Face 

Polishing 

Embossing 

Planishing 

170g 

REPOUSSE HAMMERS & MALLETS 

Peddinghaus 

Chasing/Repousse 

#49.02 

Shrinking 

1 Sq Face 

Grooving 

Grooving 

90 Degree 

Faces 

Finishing 

Grooving 

Planishing 

200g 

Shrinking 

#52.02 

#47.02 

#50.02 

#51.02 


Chasing and Repousse Hammers 

A multi-purpose hammer for chasing, chiseling, riveting or peining. Well balanced hardwood handles. 


0101020025 Peddinghaus, 25mm (56 x 25 x 13mm) 2.5 oz 

077-0804 Picard, 30mm (1-1/4” face) 3.7 oz 

Raising Hammers 

Peddinghaus 

Large Scale Chasing or Raising 


0052020000 Chasing, 300g (136 x 16 x 20mm) 11 oz 

0403020000 Chasing, 400g Silversmith Style (117 x 15 x 20mm) 14 oz 

Polishing/Shrinking 

0069020000 Single Face Polishing, 400g (82 x 34mm High Ball) 14 oz 

0062020250 Polishing, 250g (24 mm - 1 Light, 1 Strong Bowed) 9 oz 

0062020400 Polishing, 400g (32 mm - 1 Light, 1 Strong Bowed) 14 oz 

0062020750 Polishing, 750g (37 mm - 1 Light, 1 Strong Bowed) 26.5 oz 

0063020000 Double Face Polishing, 400g (32mm Different Bowed) 14 oz 

0050020300 Shrinking, 300g (23, 24mm - 1 Flat, 1 Bowed) 11 oz 

0047020200 Shrinking, 200g (95mm, 23, 23mm - 2 Flat, 1 Square) 8 oz 



Embossing 

Works metal from the back to create three dimensional forms. 

0051020200 Embossing, 200g (18, 21mm - High Bowed) 8 oz 



Grooving 

0053020200 Grooving, 200g (9, 11mm Faces) 8 oz 

0053020300 Grooving, 300g (12, 14mm Faces) 11 oz 

0054020300 Grooving, 300g (10, 30mm - 90 Degree Faces) 14 oz 

0178030000 Finishing/Grooving, 380g (1 Round, 1 Hooked Pein) 14 oz 

Planishing 

Used to easily harden and smooth gold, silver, brass and other metals. 

0402020000 Planishing, 170g (Silversmith Style 24mm. 1 Flat, 1 Bowed) 6 oz 

2059030000 Planishing, 200g (1 Flat Face) *S/O 7 oz 

0071020000 Planishing/Grooving, 300g (27, 25mm Round Light Bowed) 11 oz 

Bordering (Creasing) 

Ideal for confined areas or creating an edge. 

0057020200 Bordering, 200g 8 oz 

0057020300 Bordering, 300g 11 oz 

Stretching 

0060020500 Stretching, 500g (30mm - 1 Flat, 1 Light Bowed) 18 oz 

0060020750 Stretching, 750g (38mm - 1 Flat, 1 Light Bowed) 26 oz 

Planishing 

Grooving 300g 

Raising Mallets 


This material, UHMB (Ultrahigh Molecular Weight Polyethylene), 

is much better than Delrin or metal and is easier on your 

joints. This nonporous material won’t mar and is easy to 

clean. Excellent impact strength, perfect for light metal work. 

Made for the Pieh Legacy Collection. Made in USA. 

Pieh 

Item # Wt. 

PRHS Pieh Pimentel Hammer 1.00 lb 

Garland Bossing Mallets 

This mallet has a Hickory handle and is made in Maine USA. 

15008 #8 1.00 lb 

15009 #9 1.25 lb 

Pieh Pimentel 

Hammer 

Bordering 

(Creasing) 

Stretching 

15010 #10, 1.50 lb We offer Chasing Tool Sets on page 55. 


#8 

#10 

Bossing Mallets 

#9 

What is ‘Pimentel’ Raising? This 

raising technique was introduced 

by our Raising instructor, Bonnie 

McKenna Harvey. Dave Pimentel 

was her professor at ASU who 

researched and invented hammers 

and stakes made of plastic. The 

hammer and the hammering 

technique he used allows the 

metal to be shaped faster while it 

“lubricates” the metal and lets it slip.

METAL FORMING STAKES 

Metal Forming Stakes 

Peddinghaus *ALL SPECIAL ORDER ITEMS 

Flat 

Item # 

0039010040 Head Stake, 1000g (2.2 lb) 

260x40mm, fine polished 

Round 

0041010040 Flat Head Stake 1000g (2.2 lb) 

260x40mm, fine polished, bowed to middle 

0042010040 Head Stake 1000g (3.5 lb) 

260x40mm, fine polished, high bowed 

0042010050 Head Stake 1600g (3.5 lb), 50mm 

260x50mm, fine polished, high bowed 

Square 

0043010000 Flat Stake 1600g (3.5 lb) 

290x50mm, fine polished 

Tinkers 

0026010060 2000g (4.4 lb) 

155x60mm, flat face, cornered, fine polished 

0026010080 4000g (8.8 lb) 

190x80mm, flat face, cornered, fine polished 

0027010060 2000g (4.4 lb) 

155x60mm, flat face, 1 round corner, fine polished 

0027010080 4000g (8.8 lb) 

190x80mm, flat face, 1 round corner, fine polished 

0028010060 2000g (4.4 lb) 

155x60mm, flat face, 2 round and 2 sharp corners, fine polished 

0028010080 4000g (8.8 lb) 

190x80mm, flat face, 2 round and 2 sharp corners, fine polished 

0029010060 2000g (4.4 lb) 

155x60mm, flat face, 4 round corners, fine polished 

0029010080 4000g (8.8 lb) 

190x80mm, flat face, 4 round corners, fine polished 

Hatchet 

0031010080 1000g (2.2 lb) 

270x80mm, dull polished, face grounded in middle 

0031010100 1400g (3.0 lb) 

300x100mm, dull polished, face grounded in middle 

0032010080 1000g (2.2 lb) 

270x80mm, dull polished 

0033010080 1000g (2.2 lb) 

290x80mm, dull polished, round face 

0033010100 1400g (3.0 lb) 

315x100mm, dull polished, round face 

0034010080 1000g (2.2 lb), 

270x80mm, dull polished, oval face 

0035010080 1000g (2.2 lb) 

270x80mm, dull polished, straight face, 1 rounded 

Bordering 

0036010040 1000g (2.2 lb) 


0036010050 1400g (3.0 lb) 


All Stakes are Special Order. 

Made in Europe. 

#39.01 

#41.01 

#42.01 

#43.01 

#27.01 

Tinkers Stake 

Flat Face, 

1 Round Corner 

#31.01 

#32.01 

#33.01 

#34.01 

#35.01 

#36.01 

#28.01 

Tinkers Stake 

Flat Face, 

2 Round and 

2 Sharp Corners 

Flat Head Stake 

Round Head Stake 

High Bowed Stake 

Square Flat Stake 

#26.01 

Tinkers Stake 

Flat Face, 

Cornered 

#29.01 

Tinkers Stake 

Flat Face, 

4 Round Corners 

Hatchet Stake 

Face Ground 

to Middle 

Hatchet Stake 

Dull Polished 

Hatchet Stake 

Round Face 

Hatchet Stake 

Oval Face 

Hatchet Stake 

Straight Face, 

1 Round-off 

Bordering Stake 


Rectangular Stake 

Square Stake 

Creasing 

Anvil 

Braziers’ 

Anvil 

See the Silversmith’s 

Anvil on page 41 & 42. 

#41.70 

All Stakes 

are 

Special Order 

Working Swage Block 

Needle Case Anvil 

1 Flat, 1 Round 

Pointed Bick 

METAL FORMING STAKES 

Silversmith 

Bick Iron 

Fretting 

Anvil 

Creasing 

Anvil with 

Bick 

Blowhorn 

Anvil 

Square Flat Anvil 

Metal Forming Stakes (continued) 

Peddinghaus *ALL SPECIAL ORDER ITEMS 

Square 

Item # 

0037017580 Rectangular Stake, 4000g (8.8 lb) 

340x75x80mm, fine polished 

0037018090 Rectangular Stake, 5000g (11 lb) 


0038018080 Square Stake, 4000g (8.8 lb) 


Bick 

0098010135 Silversmith Bick Iron, 3kg (6.6 lb) 

135x135mm 


135x135mm 

0098010190 Silversmith Bick Iron, 5kg (11 lb) 

190x180mm 

0098010210 Silversmith Bick Iron, 6kg (13 lb) 

210x190mm 


250x230mm 

Tinsmith 

0023010000 Braziers' Anvil, 10kg (22 lb) 

350x45x30mm, (work surface dull polished) 

0019010000 Fretting Anvil, 6kg (13 lb) 

325x33x12mm (work surface polished) 

0015010000 Creasing Anvil, 4kg (8.8 lb) 

300x25x25mm 

0017010000 Creasing Anvil with Bick, 4kg (8.8 lb) 

350x25x25mm 

0010010000 Blowhorn Anvil, 7kg (15.4 lb) 

700mm (27.57” long) 

0004010700 Needle Case Anvil, 5500g (12 lb) 

700x15x10mm (1 flat, 1 round pointed bick) 


700mm, (1 flat, 1 round pointed bick) 


700x14x16mm, (1 flat, 1 pointless bick) 

0097010080 Square Flat Anvil, 1750g (3.8 lb), 80mm 

Stake Holder 

Item # 

0106010000 Peddinghaus, Working Swage Block, 9500g (21 lb) 

Four working high polished surfaces and holes for stake 

tools for holding stake tools. It has different size hollows for 

drawing and dividing, and different size square holes for 

holding stakes, etc. 

#50.70 

#10.70 


1 Flat, 1 Round Pointed Bick 


1 Flat, 1 Pointless Bick 


METAL FORMING TOOLS, SWAGES 



Premium-quality forming and rasing stakes are designed for 

blacksmiths, sheet metal workers, coppersmiths, jewelers and 

autobody workers. These stakes are gorgeous blemish-free 

polished surfaces; stakes are forged and tempered for excellent 

performance and longevity. They are carefully engineered to 

reduce strain-the softer inner body absorbs impact through the 

hardened surface. Our stakes are forged and hardened in the USA. 

Snarling Irons 

Snarling irons are used to reach interior spaces for forming or 

repairing vessels. Mount the end with the 90-degree bend in a 

vise, with the bent end pointed down so the polished working 

end is pointed up. You Then place your working piece, such as 

a vessel like a bowl or a pot, over the hard to reach area you 

wish to work on. Strike the snarling iron, with a hammer or a 

tool, a few inches away from the vise, and the polished working 

end will move up in response. 

Item # 

SN1/2TM Pieh Snarling Iron, Medium, 1/2 x 14” 

SN3/4TM Pieh Snarling Iron, Large, 3/4 x 14” 

Snarling Iron, Medium Snarling Iron, Large 

(continued) 

Allcraft 

These stakes are excellent in quality with a high polish finish. 

They fit in any hardy or vise. Made in USA. 

Item # 

074-09 Allcraft, Mushroom Stake 

The stake face is round, 2-1/4” diameter. 

074-06 Allcraft, Flat Top Stake 

The stake face is flat & circular with a sharp edge. 1-7/8” diameter. 

SWAGE BLOCKS 

A swage (or swedge) block is a large, heavy block of cast iron 

or steel used in smithing with various sized shapes in its face 

and forms on the sides. Operations performed on a swage block 

include but are not limited to bending, cutting, punching and 

forming with the use of a hammer. The primary feature for the 

artist blacksmith is the bowl and semi spherical depressions. 

The sides are usually scalloped with half rounds, 90 degree V 

grooves and half hexes to present formed shapes for forging 

operations. You can use the sides to forge gun barrels, or to 

make the curve on a wheel or finish a wheel rim. Other shapes, 

such as the half hexagon, can be used with a matching fuller 

(die) to form a hexagonal cross-section on a bar. 

Green-Mengel 

Made of ductile iron and finished with all inside shapes cleaned. 

May have a gate mark. Made in USA. 

Item # Weight 

GMSB-A Swage Block A 66 lb 

Includes 4 ladles and 2 spoons (small and large) on one side: 

Ladle sizes: 5”, 4”, 2-1/2” and 1”. The opposite side has a betty oil 

lamp and fire place shovel. 10 x 10 x 3-3/4”. 

GMSB-B Swage Block B 60 lb 

One side is common with Block A: The opposite side has 1 deep 

ladle: 7-1/2” dia. x 1-3/4” deep. 10 x 10 x 3-3/4”. 

GMSB-P Mini Block A 3 lb 

Makes a great paperweight and is dated for the year it is made. 

You can collect one for every year! Some silversmiths like this 

block too. The block is polished by the silversmith and then used 

as a tool. It is identical to the A Block except in size, 3 x 3 x 1”. 

Lorance 

Item # Weight 

RLBLK Rectangle Swage Block 50 lb 

Cast Iron. Made in USA. 7-1/2 x 13 x 3”. 

The Working Swage Block from Peddinghaus is on page 51. 

Sinusoidal Stakes 

Synclastic: "Curved in all directions towards the same point" 

Anticlastic or Anti-Clastic: "Similar to synclastic but produces a 

concave curve instead of a convex curve". Used in the process 

called anticlastic raising. This is the 8" long (small length) 

Sinusoidal Stake. Steel Sinusoidal stakes are commonly used 

with plastic or nylon hammers like our "Bossing Mallets or Pimentel 

Raising hammers" on page 44. 

Item # 

SS1TM Pieh Sinusoidal Stake, Small Wave 

SS2TM Pieh Sinusoidal Stake, Medium Wave 

SS3TM Pieh Sinusoidal Stake, Large Wave 

BI1TM Pieh Bick Iron, 8 x 1” 

BS3TM Pieh Ball Stake, 2-3/8” 

For use in Pexto Style Stake Plate. 1018 Steel 


Sinusoidal Stake 

Small 

Mushroom Stake 

Flat Stake 

Lorance Swage Block 

Green Mengel Swage Block A 



Medium 


Ball Stake 



Large 


Bick Iron 

BPCF 

Cast iron swage blocks with impressions and various round 

and square hole sizes. Both A & B patterns are 12 x 12 x 4”. 

Designed by Bill Pieh, Made in USA. 

Item # Weight 

CFSB-A BPCF Swage Block A 125 lb 

CFSB-B BPCF Swage Block B 130 lb 

BFSM-M BF Mini Swage Block 7 lb 

A very handy swage block size useful in many projects. Shapes 

and sides are clean. Made of cast iron 3-1/2 x 4 x 2”. 

BPCF Swage Block A 

BPCF Swage Block B 

BFSM Mini 

Swage Block 

Green Mengel Swage Block B 


Chisels 



Item # 

VC000 Pieh Veining Chisel, S7 

VC000-H13 Pieh Veining Chisel, H13 

The curve helps you to stay in the vein 

allowing you to keep a straight line. 

7” long. Try our entire collection of S7 

tools. See our Punch Sets in the index. 

Made in USA. 

Peddinghaus 

5045020000 Hot Chisel with Ash Handle 

5046020000 Cold Chisel with Ash 

Handle 

6615110000 Hand Slitting Chisel 

6615110000 Hand Slitting Chisel with 

Plastic Handle Guard 

The Peddinghaus slitting chisel is made of 

chrome-molybdenum air-hardened steel with 

a non-spread head. Made in Germany. 

Hardys 


Our hardy is drop forged from H13 tool 

steel. Chisel style is beveled on both 

sides. Made in USA. 

Item # 

PTCH750 Pieh Chisel Hardy, 3/4” 

PTCH875 Pieh Chisel Hardy, 7/8” 

PTCH100 Pieh Chisel Hardy, 1” 

PTCH125 Pieh Chisel Hardy, 1-1/4” 

PTCH750-B Pieh Bias Hardy, 3/4” 

PTCH875-B Pieh Bias Hardy, 7/8” 

PTCH100-B Pieh Bias Hardy, 1” 

PTCH125-B Pieh Bias Hardy, 1-1/4” 

Shank fits 1” hardy holes. May be used in 

anvil hardy hole for forging or raising and 

at the fly press, vise etc. Made in USA. 

Ball Hardy 

Item # 

CDB1 Pieh Ball Hardy, 1” 

Cone Mandrels 



Item # 

PTCM34 Mini Mandrel, 3/4” 

PTCM78 Mini Mandrel, 7/8” 

PTCM1 Mini Mandrel, 1” 

PTCM114 Mini Mandrel, 1-1/4” 

Fits in anvil hardie hole. Shank is not 

tapered. OAL: 8”, 5-3/4” from base to 

tip. Diameter starts at 2” and tapers to 

point. Fully machined. Made in the USA. 

Green-Mengel 

Item # Weight 

GMCM15 Mandrel, 3/4” 15 lb 

Foundry cast-finished with a tong grove. 

OAL: 11”, Cone Length: 9”, Cone 

Diameter: 4-1/2” - 3/8”. Shaft tapers 3/4 - 1”. 

See more Chisels & Hardys in the 

Farrier Tools Section, page 35. 

We offer Swages and 

Guillotines Fullers on see page 76. 

CHISELS, HARDY TOOLS 


Veining Chisel 

Slitting Chisel 

Slitting Chisel 

with Handle 

Hot & Cold Chisel, 

1500g, 24” 



Bias 

Pieh Ball 

Hardy 

Pieh Mini 

Mandrel 

Green 

Mengel 

Mandrel 

Anvil Fork Saddle 


All steel construction. The Pieh Tool Anvil Saddle works 

great for scroll work and other fine detail work that you can’t 

get around the horn. This tool is ideal for forging barbecue 

forks! Also makes a great replacement for a worn out anvil 

horn. Shank is 2” long. Surface can be treated with Cherry 

Red to make a tougher working surface. Made in USA. 

OAL 5-1/4” (OD x ID x L) 2 x 1 1/2 x 3” 

Item # 

PTAS750 Pieh Anvil Fork Saddle, 3/4” 

PTAS875 Pieh Anvil Fork Saddle, 7/8” 

PTAS100 Pieh Anvil Fork Saddle, 1” 

PTAS114 Pieh Anvil Fork Saddle, 1-1/4” 

Turning Forks 


Fits in anvil hardy hole. Welded shank is not tapered. 

Useful in bending stock at the anvil. Made in the USA. 


Item # Shank OAL Between Forks 

TF34 3/4” 5-1/2” 5/8” 

TF78 7/8” 5-1/2” 5/8” 

TF1 1” 5-1/2” 5/8” 

TF114 1-1/4” 5-1/2” 5/8” 

Scrolling Wrench 

Has a hole drilled in handle so you can hang it on a hook 

in your shop. Made in USA. 

Item # 

CDSW12 Pieh Scroll Wrench, for 1/2” 

10 inches long, 1-3/4 inch long jaw, 1-7/8” long prongs (2). 

CDSW38 Pieh Scroll Wrench, for 3/8” 

10 inches long, 2 inch long jaw, 1-1/2” long prongs (2). 

Vise Scroll Tool 


Item # 

CDVSH Pieh Vise Scroll Tool 

Our vise scroll tool has a hexagon base making it adaptable 

to many holding methods. Two prongs protrude allowing for 

tight bending or scrolling to be accomplished. Made in USA. 

Smoosh-O-Matic 

Item # 

SMOOSH Smoosh-O-Matic, 1” 

Fits in the anvil hardy hole to help you make tenons and 

more. It comes with 2 sets of dies: a flat top and bottom 

die set; and a side butcher top and bottom die set. 

Made in USA. 

Anvil Devil 

An Anvil Devil is a hard triangular piece of heat-treated 

steel that is used by farriers & blacksmiths for cutting or 

making V notches. You can place it on any flat surface. 

(or use in a GE Anvil Devil holder if you can still find one!) 

Item # 

SAD Anvil Devil, 2-1/2x1/2” (63.5x 13mm) 

Rose Blank Kit 


Item # 

ROSE-K Pieh Rose Blank Set 

This is a rose in kit form cut from 18 gauge steel. It 

makes a very beautiful rose! Make it open or closed! 

Consider embellishing with Gilders Paste or one of our 

patinas for added beauty. Kit consists of 5 pieces; 1 each 

of the following blanks: 4-1/2”, 3-1/2”, 2-3/4”, 2-1/2” and 

a 2” bud bottom. 

Pieh Anvil Fork 

Saddle 

Pieh Turning 

Fork 

Pieh Scrolling 

Wrench 3/8” 

Pieh Scrolling 

Wrench 1/2” 

Pieh Vise 

Scroll Tool 

Smoosh-O-Matic 

Anvil Devil 

Pieh Rose Blank 

Photo of 

Finished Rose 


SWAGES, FULLERS, DRIFTS, PUNCHES 

Swages 

Peddinghaus 

Item # *Special Order Items 

5048020010 Top 10mm (.39”) handled 

5048020015 Top 15mm (.59”) handled 

5048020020 Top 20mm (.79”) handled 

5049010010 Bottom 10mm (.39”) 7/8” 

5049010015 Bottom 15mm (.59”) 7/8” 

5049010020 Bottom 20mm (.79”) 7/8” 

Fullers 

Peddinghaus *Special Order Items 

5054020015 Top 15mm (.59”) handled 

5054020020 Top 20mm (.79”) handled 

5055010015 Bottom 15mm (.59”) 7/8” 

5055010020 Bottom 20mm (.79”) 7/8” 

Flatters 

Peddinghaus 

5050020060 60mm (2.50”), handled 

5050020070 70mm, (2.75”), handled 

Set Hammers 

Peddinghaus *Special Order Item 

5052020000 Set Hammer, 51mm (2”) handled 

(Use with 5033010000 Anvil Block) 

Center Punches 

Pieh Legacy Collection TM 

Item # 

PCP000 Pyramid Punch, 7” long 

CP000 Center Punch, 7” long 

Both made from 1/2” round S7 tool steel. 

Flatland Forge 

CNTRP1 Center Punch, 7” long 

Made from 4140 steel. 

Peddinghaus 

6612110130 Center Punch, 10x120mm 




Made of chrome-molybdenum air-hardened 

steel with non-spread heads. 

Hand Fullers 


Item # 

FP125 Pieh Fuller Small, 1/8” 

FP250 Pieh Fuller Medium, 1/4” 

FP375 Pieh Fuller Large, 3/8” 

Made from 5/8” S7 round stock, 7” long. 

Ball Punches 


Made from 1/2” round S7 tool steel, 7” long. 

Item # 

BP125 Ball 1/8” 

BP188 Ball 3/16” 

BP250 Ball 1/4” 

BP312 Ball 5/16” 

BP375 Ball 3/8” 

BP437 Ball 7/16” 

BP500 Ball 1/2” 

BallP7 Set of 7 Ball Punches 

ToolHolder-12 Denim Tool Roll, 12 Pocket 

BP625 Ball 5/8” 

BPD625 Ball Dimpled 5/8” 

BP750 Ball 3/4” 

BPD750 Ball Dimpled 3/4” 

Top Fuller 

Top 

Swage 

Bottom 

Swage 

Bottom 

Fuller 

Flatter 

Pieh Tool Center Punch 

Flatland Center Punch 

Peddinghaus Center Punch 

Small, Medium, Large 

Fullers 

Ball 

Punch 

Dimpled 

Set 

Hammer 

Pieh Tool Pyramid 

Center Punch 

1/8” 

3/16” 

1/4” 

5/16” 

3/8” 

7/16” 

1/2” 

Anvil Block 

Peddinghaus 

Item # *Special Order Items 

5053010000 Bottom Block, (51mm) 2” 

7/8” Shank. Used with their Set Hammer. 

Round Punches 

Peddinghaus Special Order Item 

5056020010 10mm handled 

5056020015 15mm handled 

5056020020 20mm handled 

Vise Wedge 


VW100 Pieh Vise Wedge 

Drift Punches 


Item # 

DP188 Pieh Drift 3/16” 






A33Set Set of all 6 Pieh Drifts 

Made from 5/8” H13 tool steel. They are 8” long with a tapered drift of 

approximately 3”. The handle area is smooth for a comfortable grip. 

The set is discounted offering you savings. 

Order our handy tool roll with this set now and save 20% on the tool roll. 

*Note: These cannot be quenched in water. 

The Veining Chisel we offer in our set is shown on 

page 53. See Iron Menagerie Book for 

step-by-step projects, BK68, page 98. 

Wizard 

Eye 

Socket 

Eagle 

Eye 

Anvil 

Block 

Round Punch 

The Pieh Tool vise wedge compliments our S7 animal head and character punch 

sets. In the book Iron Menagerie, you will find a number of projects. The 

vise wedge is needed in some of the projects. Of course its uses are endless. 

Made from mild steel from welded angle bar and painted black. The bottom portion 

should be placed securely in a vise leaving the angle wedge on top. 

Peddinghaus Drift 

Peddinghaus 

Item # 

6608110001 Drift 10x1 

6608110003 Drift 10x3 

6608110004 Drift 10x4 

6608110005 Drift 12x5 

6608110008 Drift 12x8 

6608110010 Drift 12x10 

6608110012 Drift 14x12 

Made of chrome-molybdenum 

air-hardened steel with non-spread heads. 

Eye/Ear Punches 


Item # 

EP250 Round Eye 1/4” 



EyeP3 Set of 3 Eye Punches 

ES500 Eye Socket 

WE000 Wolf Eye 

DE000 Duck Eye 

EE000 Eagle Eye 

HE000 Horse Head Ear 

S7Set20 Set of all 20 S7 Tools 

Set Includes: 7 Ball, 3 Round Eye, Center, Wizard 

Eye Socket, Duck Eye, Wolf Eye, Eagle Eye, 

Horse Head Ear, Veining Chisel, and 3 Fullers. 

H13 Drift Set 

Tool 

Roll 

Eyes: 1/8”, 1/4”, 3/16” 

Horse 

Head 

Ear 

Vise 

Wedge 

Item # 

ToolHolder Tool Roll, 20p 

ToolHolder-12 Tool Roll, 12p 

Our 20 & 12 Pocket Denim 

Tool Rolls will keep your tools 

organized. *When you order 

one with the S7 20 Piece or 6 

Piece Drift Set you will save 

20% on the roll. Colors vary. 


Wolf 

Eye 

Duck 

Eye

Repousse Supplies 

Item # 

PB8 Pitch Bowl, 8” 

Cast iron pitch bowl. Bottom is slightly flat. Use with our rubber ring pad. 

Made in India. 

PBPR Rubber Ring Pad 

Pad fits our 8 inch pitch bowl. Fits under the bowl allowing you to rotate it 

as needed. 

RGP Red German Pitch, 2 kg 

Pitch is used for chasing and repousse. Red German Pitch isn’t brittle 

and is forgiving. It is far less toxic and easier to use than black pitch and 

yields better results. Comes in 2 kg bread pan like container. It melts at a 

relatively low temperature and can be safely manipulated and shaped by 

hand. *One 2 kg container will not fill bowl completely. Splashing concrete 

in the bottom will remedy this. 

PBK8 8” Pitch Bowl Kit 

This kit contains an 8 inch cast iron pitch bowl, the proper sized rubber pitch 

bowl pad, and a 2 kg bar of the finest quality Red (hard) German pitch. Pitch 

bowl and pad made in India. Warning: One 2 kilo loaf of pitch will not fill 

this pitch bowl full. It will be shy a 1/4 inch or so. You will need to either buy 

a second 2 kilo loaf or splash a little “quick concrete” in the bottom of your 

bowl first. If you do this, you will have enough and may even have some extra. 

Chasing & Repousse Tools 

Peddinghaus 

Item # 

0095010000 Chasing Design Set 

This 10 piece chasing set is used mainly by tinsmiths to leave impressions 

in metals such as tin, copper, brass, etc. Each tool is a different design and 

are 4” long. 


Overall length is approximately 4-1/2”. 

Made from W-1 tool steel. Made in USA. 

Item # 

PTChaseS1 Pieh Chasing Set #1 

The Pieh Tool Chasing Set #1 includes 6 tools: 

• 1 Thick Liner ¼” 

• 1 Rectangle Push Tool ¼” 

• 1 Thick Liner 3/16” 

• 1 Square Planisher 3/8” 

• 1 Push Tool 3/8” 

• 1 Oblong Push Tool 



• 4 Half Rounds: 3/16”, 1/4” (2), and 7/16” 

• 1 Half Round Planisher 1/8” 

• 1 Rhombus (Flat): 1/8” 

• 1 Push Tool (Round) 3/16” 

• 1 Round (Flat) 3/16” 

• 1 Thin Liner: 3/16” 

• 1 Thin Liner (Double sided bevel) 3/16” 

• 1 Thick Liner: 7/16” 

• 1 Thick Liner (Double sided bevel): 7/16” 



• 7 Half Rounds: 3/16” (3), 1/4” (2), 7/16” and 1/2” 

• 1 Half Round Planisher 1/8” 

• 2 Rhombus (Flat): 1/8” and 3/16” 

• 1 Push Tool (Round) 3/16” 

• 1 Round (Flat) 3/16” 

• 2 Thin Liners: 3/16” and 1/4” 

• 2 Thin Liners (Double sided bevel) 3/16” and 1/4” 

• 2 Thick Liners: 7/16” and 1/2” 

• 2 Thick Liners (Double sided bevel): 7/16” and 1/2” 

*Please note that 12 of these tools are from Set #2. If 

you have already purchased Set #2 and would like to 

order only the 8 New tools you may do so now. They 

are listed at the right. 

REPOUSSE TOOLS 


Chasing Set #1 

Pieh Tool Chasing Set #2 

Pieh Tool Chasing Set #3 

Pitch Bowl, Ring Repousse Technique Repousse Cup & Turtle 

& Pitch 

by Bonnie Harvey 

Instructions: Wrap the pitch in several layers of heavy cloth or in a few 

plastic bags and moderately hit it a few times with a heavy hammer and 

place in the pitch bowl; then heat slowly in a 250 or 300 degree oven. 

Over-heated pitch will become brittle once it’s cooled again and 

may become useless. If overheated, remove the burnt area immediately 

to avoid further contamination of the pitch bowl. Once the pitch is 

melted let the pitch air-cool for several hours. When you are doing 

repousse soften pitch with a heat gun when ready to flip your piece. 

We recommend you dip your fingers in water before attempting to 

handle hot pitch. If the surface of the pitch appears glossy, it is 

too hot to touch. We recommend putting chap stick on the back of 

your piece to keep pitch from sticking. 

Peddinghaus 

10 piece 

Chasing Set 


Chasing Set 

#4 (1 of 6) 

Diagram of the tool ends in 

Pieh Chasing Set #3 

We offer 

Chasing and Repousse 

Books: pages 112-114 

DVD’s: pages 127 

Item # 

PTChaseS4 Chasing Set #4 

The Pieh Tool Chasing Eye Set includes 6 tools: 

• 1 each: 1/8” Round and Oval 



Pieh Tool Chasing Tools Eye punches are the easy 

way to make perfect eyes. After you have identified 

the facial features, simply position the proper size 

eye punch and rotate while pushing on the handle. 

The result is a perfectly formed round eye. The 

round punches are mainly used on human figures 

and the oval punches are mainly used on animal 

figures. Overall length is approximately 3-1/2” 

Made from W-1 tool steel. Made in USA. 

• These tools are designed to be used in wood 

but may also be used in metal. • You may want 

to relieve the edges if they are to sharp for certain 

designs and materials. 

Individual Chasing Tools 

Overall length is approximately 4-1/2”. Made 

from W-1 tool steel. Made in USA. 

Item # 

PTChaseHR5.0 Pieh Half Round 1/2” 

PTChaseHRT.19 Pieh Half Round 3/16” Thin 

PTChaseHRTH.19 Pieh Half Round 3/16” Thick 

PTChaseRh.19 Pieh Rhombus 3/16” 

PTChaseTH.438 Pieh Thick Liner 7/16” 

PTChaseTH5.0 Pieh Thick Liner 1/2” 

PTChaseTHDS5.0 Pieh Thick Liner 1/2” 

Double Sided 

PTChaseTL1.88 Pieh Thin Liner 3/16” 

PTChaseTL.25 Pieh Thin Liner1/4” 

PTChaseTLDS.25 Pieh Thin Liner 1/4” 

Double Sided 


BLACKSMITHING TONGS 

Pieh Legacy Collection Durable: 4140 or 1040 carbon steel 

Lightweight: 

Comfort: 

Versatility: 

Control: 

Drawn out reins, rounded jaws 

Crank in reins provides alignment 

Front and side v-bit to pick up 

round or square stock 

Balls on reins for use with rings* 

Guaranteed: Lifetime with proper care 

TM Tongs 

The Billy Tongs are designed to provide unique versatility in one pair of tongs! We 

offer USA made and our original foreign made tongs. Our foreign made tongs are beautifully 

polished with a blued finished. The USA made tongs will have a sandblasted finish. Many tongs 

have "balls" on the reins to allow for the use of tong rings. Designed by Bill and Amy Pieh. 

the Billy Box Jaw 

Designed to hold flat stock securely without it turning while you 

are hammering. Box jaw tongs are very popular with blacksmiths, 

bladesmiths and farriers. Offered in 4 sizes: 1/2”, 3/4”, 1” and 

1-1/2” widths. Select the tong appropriate to the thickness and 

width of metal you are using. Balls on the reins. 

Jaw Length: 2-5/8” Reins: 14” 

Item # 

1/2” 

PT4052 Box x 1/4” 

PT4053 Box x 5/16” 

PT4054 

3/4” 

Box x 3/8” 

PT4000 Box x 1/4” 

PT4001 Box x 5/16” 

PT4002 Box x 3/8” 

1” 

PT4003 Box x 1/4” 

Billy Box Jaw 

PT4004 Box x 5/16” 

PT4005 Box x 3/8” 

PT4006 

1-1/2” 

Box x 1/2” 

PT4007 Box x 5/16” 

PT4008 Box x 3/8” 

PT4009 Box x 1/2” 

the Billy Rivet 

Rivet tongs are designed to hold round stock, such as bar, pipe 

or tooling securely. You will hold tongs perpendicular to the piece. 

Balls on the reins. Jaw Length: 2-1/2” Reins: 14” 

Item # 

PT4010 3/8” 

PT4011 1/2” 

PT4012 3/4” 

Billy Rivet 

the Billy Pick Up 

The Pick Up tongs purpose is similar to the rivet tongs, but has 

a bit more versatility in size choices. The Single Pickup offers a 

V-bit notch for quick grabbing. Balls on the reins. 

Item # Jaw Stock Size Reins 

PT4013 Single, Small 3” 1” 14” 

PT4014 Single, Medium 4” 1-1/2” 16” 

PT4015 Single, Large 5” 2” 18” 

PT4016 Double 4” Various 13” 

PT4017 Triple 6” Various 16” 

Billy Single 

Pick-Up 

Billy Double 

Pick-Up 

Billy Triple 

Pick-Up 

the Billy Universal Wolf Jaw 

The V notch throughout the jaw length and on the sides of the 

jaws have different openings for holding various sizes of stock. 

Balls on the reins. 

Item # Jaw Stock Size Reins 

PT4018 Small 2-1/2” Various 13” 

PT4019 Large 3-3/4” Various 15” 

Billy Wolf Jaw Small Billy Wolf Jaw Large 

the Billy V-Bit Bolt 

The Bolt tongs are our most popular tong because they are so 

versatile. The opening before the boss allows for dimensional 

pieces held in the jaw while forging the other end. It has a V notch 

throughout the jaw length as well as a side V notch. V bit tongs will 

hold round or square! That is what makes them so great! 

Made from carbon steel. Jaw Length: 3-7/8” Reins are 14” 

Item # 

PT4020 1/4” 

PT4021 3/8” 

PT4022 1/2” 

PT4023 5/8” 

PT4024 3/4” 

Made in USA. 

the Billy V-Bit 

The V-Bit has a V notch throughout the jaw length as well as a 

side V notch. Used like the bolt tong but for tighter situations or 

where the dimensions is not a concern. Balls on the reins. 

Jaw length: 2-1/2”; Reins: 14” 

Item # 

PT4037 1/4” 

Billy V-Bit 

PT4038 3/8” 

PT4039 1/2” 

PT4040 5/8” 

PT4041 3/4” 

the Billy Scrolling 

For scrolling or bending ironwork without marring the surface. 

The jaws are smooth, rounded and tapered to about an 1/8” 

point. Balls on the reins of all tongs except for the Pliers. 

Item # Jaw Reins 

PT4042S Small 2-3/8” 8” 

PT4042 Small 2-3/8” 14” 

PT4043 Large 4-5/8” 14” 

PT4044 Pliers 3” 7” 

Billy Scrolling Small 

Billy Scrolling 

Pliers 

the Billy Fire/Farriers 

The Fire tong has added grooving and a concave surface inside 

the jaw for better grip. Jaw length: 1-7/8”, Reins: 13”. The 

Duckbill can hold small round, square or flat bar. Balls on the 

Fire Tong reins only. Jaw length: 2-7/16”, Reins: 11” 

Item # 

PT4046 V-Bit Duckbill, 3/16” 

PT4047 Fire, 1/4” 

PT4049 Fire, 5/16” 

PT4048 Fire, 3/8” 

PT4050 Fire, 1/2” 

Billy Duckbill 

PT4051 Fire, 5/8” 

See Scrolling 

Wrenches on 

page 53. 

Billy V-Bit -Bolt 

Item # 

PT4020-P 1/4” 

PT4021-P 3/8” 

PT4022-P 1/2” 

PT4023-P 5/8” 

PT4024-P 3/4” 

Made in Pakistan. 

Balls on the reins 

Billy Scrolling Large 

Billy Fire 


BLACKSMITHING & FARRIER TONGS 

Tongs (continued) 


the Billy Knifemaker Z Tong 

The Billy Z Tongs have a V-bit jaw designed to hold flat, round and 

square stock. More versatility has been added to this style bolt 

tong because the jaw is offset (like a Z). This not only makes it 

easier to hold long decorative pieces but is the perfect tong for 

the knifemaker! You are no longer limited by the length of stock 

you wish to work! The jaws are smooth with a deep U shaped 

V-notch in each jaw. The V-notch allows you to hold a larger 

range of thickness and widths in one pair of tongs! Handles are 

slightly wider and concave on the underside. 

Jaw Length: 3”; Reins: 14” 

Item # 

1/4” 

PT4056 Z Tong 3/8” 

PT4057 Z Tong 1/2” 

PT4058 Z Tong 3/4” 

PT4059 Z Tong 1” 

PT4060 Z Tong 1-1/4” 

PT4061 Z Tong 1-1/2” 

PT4062 Z Tong 1-3/4” 

PT4063 Z Tong 2” 

PT4064 Z Tong 2-1/4” 

PT4065 Z Tong 2-1/2” 

Peddinghaus 

Item # Jaw Rein 

Pick-Up 

6170010500 500mm 2.0” 19.69" 

6170010600 600mm 2.4” 23.62" 

Flat Nosed 

6171010300 300mm 1.2” 11.81" 

6171010400 400mm 1.6” 15.75" 

Round Nosed 

6172010300 300mm 1.2” 11.81" 

6172010500 500mm 2.0” 19.69" 

6172010600 600mm 2.4” 23.62" 

Wolf Jaw 

6175010300 300mm 1.2” 11.81" 

6175010400 400mm 1.6” 15.75" 

6175010500 500mm 2.0” 19.69" 

6175010600 600mm 2.4” 23.62" 

Billy Z Tong 

Wood Brushes, Pferd Milwaukee 

Block 

Flat Carbon Steel 

Item # Trim Rows Block Size 

20566 1-1/4” 5 x 10 7-3/4 x 1-1/2” 

20687 2” 5 x 10 7-3/4 x 2-1/2” 

20688 

Handled 

3” 5 x 10 7-3/4 x 3-1/2” 

Flat Carbon Steel 

20567 1-1/4” 8 x 12 9-1/4 x 3-3/4” 

85033 1-3/16” 4 x 16 10-1/4 x 1-1/8” 

Fine Brass Wire 

85067 1/2” 2 x 9 8-5/8 x 1/2” 

20549 1” 4 x 19 13 x 1-1/8” 

Stainless Steel 

85055 1/2” 3 x 7 7-1/2 x 1/2” 

Pick-Up 600mm 

Flat Nose 300mm 

Round Nose 300mm 

Wolf Jaw 400mm 

Farrier Tongs 

Blurton 

The hot fitting tong offers tapered ends 

shaped like a nail head to ensure a tight 

hold on the shoe and will work on a wide 

range of sizes. 

Item # 

JBHFT Hot Fitting Tong 

W-Brand 

Conveniently holds a hot shoe in place 

and locks with the tong ring. This is your 

best friend when it comes to hot fitting! 

WHST Hot Fitting Tong 

Diamond 

FT15 Fire Tong, 3/8” 

Blurton 

These 17” tongs feature a heavy duty rivet 

and are built to last. Blurton tools are 

individually handcrafted and will provide 

you with years of service. Made in England. 

JBFT1/4 Fire Tong, 1/4” 





See Pieh Farrier Tongs on page 56 

20566 20687 

Blurton Hot 

Fitting Tong 

W Brand 

Hot Fitting 

Tong 

Blurton Fire 

Tongs 


20567 

85033 

Diamond 

Fire Tongs 

Check our calendar for the latest events at Pieh Tool. 

The Bill Pieh Resource for Metalwork is a unique three-season 

metalworking school located in Camp Verde, Arizona, 25 miles 

south of Sedona and 1 hour north of Phoenix. Founded in 2003 by 

Pieh Tool Company, Inc., the school’s mission is to foster interest 

and knowledge in metalworking crafts. These include disciplines 

such as blacksmithing, bladesmithing, and coppersmithing such 

as raising, sinking, chasing & repousse. Workshops are also 

offered in silversmithing, engraving and jewelry. As Arizona’s 

only notable non-university metalworking school, the Bill Pieh 

Resource for Metalwork offers both beginner and advanced artists 

a variety of 2 and 3-day courses and several demonstrations 

taught by some of the worlds finest metalsmiths. The programs are 

expanding and are updated on the Pieh Tool website Calendar. The 

school is named in honor of the late Bill Pieh. 

Come learn in an atmosphere of friendship and camaraderie! 

The creative energy and enthusiasm of the instructor provides 

adults and teenagers with unique skills and lasting memories. 

20688 

85067 20549 

85055

RIVETS, RIVET HEADERS, SCREWS 

Belt Rivets & Burrs 

Copper Belt Rivets 

Item # 

8 Gauge 

Length Qty/Box U/M 

Shank Taper 5/32” (.181” to .165”) 

9B0840 5/8” 112 LB 

9B0848 3/4” 100 LB 

9B0864 1” 79 LB 

9B0868 

10 Gauge 

1-1/4” 64 LB 

Shank Taper 1/8” (.151” to .137”) 

9B1040 5/8” 162 LB 

9B1048 3/4” 144 LB 

9B1064 

14 Gauge 

1” 110 LB 

Shank Taper, 3/32” (.102” to .092”) 

9B1432 1/2” 579 LB 

9B1440 5/8” 490 LB 

9B1448 3/4” 435 LB 

9B1464 1” 336 LB 

Item # Radius For Shank Size U/M 

PT-RH0188 3/16” 3/32” EA 

PT-RH0250 1/4” 1/8-5/32” EA 

PT-RH0375 3/8” 7/32” EA 

PT-RH0438 7/16” 1/4” EA 

PT-RH0500 1/2” 9/32” EA 

PT-RH0563 9/16” 5/16” EA 

PT-RH0625 5/8” 11/32” EA 

PT-RH0688 11/16” 3/8-13/32” EA 

PT-RH0875 7/8” 1/2” EA 

PT-RH1063 1-1/16” 5/8” EA 

PT-RH1375 1-3/8” 3/4” EA 

Button Head Rivets 

Button 

Head 

Rivet 

Steel 

Rivets are made of solid steel and are 

perfect for blacksmith projects. Some 

sizes are NOT Annealed. 

Item # 

1/8” Shank 

Length Qty/lb U/M 

S0125R01000 

5/32” Shank 

1” 240 LB 

S0156R00625 5/8” 209 LB 

S0156R02000 2” 85 LB 

S0156R05000 

3/16” Shank 

5” 35 LB*S/O 

S0187R00375 3/8” 205 LB 

S0187R00500 1/2” 175 LB 

S0187R00625 5/8” 145 LB 

S0187R00750 3/4” 146 LB 

S0187R01000 1” 108 LB 

S0187R01500 1-1/2” 23 LB 

S0187R02000 2” 57 LB*S/O 

Copper Burr 

Rivet Kits-Steel Save money when buying the Kits! 

Item # U/M 

RivKit-A Rivet Kit Assortment, Kit A, 10 sizes 14 lb/KIT 

1 lb 1 lb 1 lb 1 lb 3/4 lb 

3/16x3/8” 3/16x1/2” 3/16x5/8” 3/16x3/4” 3/16x1” 

1-1/2 lb 2 lb 2 lb 1-1/2 lb 2 lb 

3/16x1-1/2” 1/4X1/2” 1/4X1” 1/4X2” 3/8X1-1/4” 

Copper 

Belt 

Rivet 

Copper Burr fit 

Copper Belt Rivets. 

Use Gauge # to 

Match 

Copper Burrs *Special Order Items 

Item # Gauge OD ID TH Qty/Box U/M 

9C0800 8 .469” .166” .045” 465 LB 

9C1000 10 .406” .138” .035” 750 LB 

9C1200 12 .360” .124“ .030” 1200 LB 

9C1400 14 .313” .093” .020” 2050 LB 

Rivet Headers Pieh Legacy Collection 

Rivet Headers allow you to finish the back side on button head rivets. This leaves an attractive 

professional appearance rather than a hammered one. We offer a size for each rivet size we sell. 

The rivet headers shown on the right show both our styles, with and without the tong ring slot. 

Item # Radius For Shank Size U/M 

PT-RH0188TG 3/16” 3/32” EA 

PT-RH0250TG 1/4” 1/8-5/32” EA 

PT-RH0375TG 3/8” 7/32” EA 

PT-RH0438TG 7/16” 1/4” EA 

PT-RH0500TG 1/2” 9/32” EA 

PT-RH0563TG 9/16” 5/16” EA 

PT-RH0625TG 5/8” 11/32” EA 

PT-RH0688TG 11/16” 3/8-13/32” EA 

PT-RH0875TG 7/8” 1/2” EA 

PT-RH1063TG 1-1/16” 5/8” EA 

PT-RH1375TG 1-3/8” 3/4” EA 

Brass 

Item # Length Qty/Box U/M 

3/16” Shank 

9V1224 3/8” 152 LB 

9V1232 1/2” 128 LB 

1/4” Shank 

9V1632 1/2” 66 LB 

Item # 

1/4” Shank 

Length Qty/lb U/M 

S0250R00500 1/2” 78 LB 

S0250R00750 3/4” 61 LB 

S0250R01000 1” 51 LB 

S0250R01500 1-1/2” 38 LB 

S0250R01750 1-3/4” 34 LB 

S0250R02000 

5/16” Shank 

2” 31 LB 

S0312R00625 5/8” 42 LB 

S0312R00875 7/8” 34 LB 

S0312R00750 3/4” 38 LB 

S0312R01500 1-1/2” 23 LB 

S0312R02000 2” 19 LB*S/O 

Qty/lb is approximate. 

Pyramid Head Screws 

(Door Screws) 

These are miniature square head lag screws, with 

a pyramid square head. They do not have a slot. 

Install with an 8-point socket, or a wrench. 

Item # Head Size/Length U/M 

PHDS06.0500 1/4” #6 x 1/2” EA 

PHDS06.0750 1/4” #6 x 3/4” EA 

PHDS07.0630 9/32” #7 x 5/8” EA 

PHDS07.1000 9/32” #7 x 1” EA 

PHDS08.0750 5/16” #8 x 3/4” EA 

PHDS08.1000 5/16” #8 x 1” EA 

PHDS10.1000 11/32” #10 x 1” EA 

PHDS10.1125 11/32” #10 x 1-1/4” EA 

PHDS12.1000 3/8” #12 x 1” EA 

PHDS12.1125 3/8” #12 x 1-1/4” EA 

PHDS12.1150 3/8” #12 x 1-1/2” EA 

PHDS14.1000 7/16” #14 x 1” EA 

PHDS14.1125 7/16” #14 x 1-1/4” EA 

PHDS14.1150 7/16” #14 x 1-1/2” EA 

Pyramid Screw 

Rivet Headers 

Vise and Tong Grip styles shown 

Copper 

Item # Length Qty/Box U/M 

3/16” Shank 

9E1224 3/8” 152 LB 

9E1232 1/2” 128 LB 

9E1264 1” 80 LB 

1/4” Shank 

9E1664 1” 66 LB 

Item # Length Qty/lb U/M 

3/8” Shank 

S0375R00750 3/4” 23 LB 

S0375R01000 1” 20 LB 

S0375R01250 1-1/4” 18 LB 

1/2” Shank 

S0500R01250 1-1/4” 9 LB 

S0500R01375 1-3/8” 8 LB 

S0500R01500 1-1/2” 8 LB 

S0500R01625 1-5/8” 7 LB*S/O 

S0500R01750 1-3/4” 6 LB 

S0500R04500 4-1/2” 3 LB*S/O 

5/8” Shank 

S0625R02000 2” 4 LB*S/O 


Item # U/M 

RivKit-B Rivet Kit Assortment, Kit B, 7 sizes 14 lb/KIT 

2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 

5/32x5/8” 1/4x3/4” 1/4x1-1/2” 5/16x5/8” 5/16x3/4” 3/8X1” 1/2X1-1/4” 

See next page for rivet specifications & drill and tap suggestions. 


RIVET SPECIFICATIONS, LAG BOLTS 

For Rivets 7/16” and Smaller 

Normal Size or D A H R 

Basic Shank Shank Diameter Head Diameter Head Height Head Radius 

Diameter Max Min Max Min Max Min Approximate 

1/16 0.062 0.064 0.059 0.122 0.102 0.052 0.042 0.055 

3/32 0.094 0.086 0.090 0.182 0.162 0.077 0.065 0.084 

1/8 0.125 0.127 0.121 0.235 0.215 0.100 0.088 0.111 

5/32 0.158 0.158 0.152 0.290 0.268 0.124 0.110 0.138 

3/16 0.188 0.191 0.182 0.348 0.322 0.147 0.133 0.166 

7/32 0.219 0.222 0.213 0.105 0.379 0.172 0.158 0.195 

1/4 0.250 0.253 0.244 0.460 0.430 0.196 0.180 0.221 

9/32 0.281 0.285 0.273 0.518 0.484 0.220 0.202 0.249 

5/16 0.312 0.318 0.304 0.572 0.538 0.248 0.225 0.278 

11/32 0.344 0.348 0.336 0.630 0.592 0.267 0.248 0.304 

3/8 0.375 0.380 0.365 0.684 0.646 0.291 0.271 0.332 

13/32 0.406 0.411 0.396 0.743 0.699 0.316 0.294 0.358 

7/16 0.438 0.443 0.428 0.798 0.754 0.339 0.317 0.387 

Notes: Approximate Proportions 

A = 1.750xD 

B = 0.750xD 

C = 0.885xD 

Length tolerance for rivets shall be + or -0.016” 

For Rivets 1/2” and Larger 

D A H R 

Shank Diameter Head Diameter Head Height Head Radius 

Normal Size Max Min Basic Max Min Max Min (Basic) 

1/2 0.500 0.520 0.478 0.875 0.938 0.844 0.406 0.375 0.443 

5/8 0.625 0.665 0.600 1.094 1.157 1.063 0.500 0.469 0.553 

3/4 0.750 0.780 0.725 1.312 1.390 1.281 0.593 0.562 0.664 

7/8 0.875 0.905 0.850 1.531 1.609 1.500 0.687 0.656 0.775 

1 1.000 1.030 0.975 1.750 1.828 1.719 0.781 0.750 0.885 

1-1/8 1.125 1.160 1.098 1.969 2.063 1.938 0.891 0.844 0.996 

1-1/4 1.250 1.285 1.223 2.188 2.282 2.157 0.985 0.938 1.107 

1-3/8 1.375 1.415 1.345 2.406 2.500 2.375 1.078 1.031 1.217 

1-1/2 1.500 1.540 1.470 2.625 2.719 2.594 1.188 1.125 0.328 

1-5/8 1.625 1.685 1.598 2.944 2.938 2.813 1.282 1.219 1.439 

Notes: Approximate proportions of manufactured shapes 

A = 1.75xD 

B = 0.75xD 

C = 0.885xD 

L = Does not affect other dimensions 

Lag Bolts-Square Head 

Black Oxide Finish Plain Finish 

Item # U/M 

SH0250LB01750 1/4 x 1-3/4” EA 

SH0250LB03500 1/4 x 3-1/2” EA 

SH0312LB01000 5/16 x 1” EA 

SH0312LB01250 5/16 x 1-1/4” EA 

SH0312LB01500 5/16 x 1-1/2” EA 

SH0312LB01750 5/16 x 1-3/4” EA 

SH0312LB03000 5/16 x 3” EA 

SH0312LB05000 5/16 x 5” EA 

SH0375LB02000 3/8 x 2” EA 

SH0375LB03000 3/8 x 3” EA 

SH0375LB04500 3/8 x 4-1/2” EA 

SH0500LB02000 1/2 x 2” EA 

SH0500LB03000 1/2 x 3” EA 

SH0500LB04000 1/2 x 4” EA 

Square Head Lag 

Oxide Finish 

Square Head Lag 

Plain Finish 

This rivet specification chart will 

help you understand the other 

measurements of the rivets we 

stock. You may also “special order” 

most of the sizes on this chart that 

are not on page 58. Specify length 

desired at time of order. 

DRILL BIT AND TAP GUIDE 

This chart is helpful in the selection of 

correct drill bits and taps for use with studs. 

Size Drill Bit Taper Tap 

5/16” 17/64” 5/16” 

9/16” 15/32” 9/16” 

3/8” 5/16” 3/8” 

Drill Stud Rivet 




Item # U/M 

SH0250LP01500 1/4 x 1-1/4” EA 

SH0250LP02000 1/4 x 2” EA 

SH0312LP01250 1/4 x 1-1/4” EA 

SH0312LP01750 5/16 x 1-3/4” EA 

SH0375LP02000 3/8 x 2” EA 

SH0375LP03500 3/8 x 3-1/2” EA 

SH0500LP02000 1/2 x 2” EA 

SH0500LP04000 1/2 x 4” EA 

SH0500LP06000 1/2 x 6” EA 

SH0625LP04500 5/8 x 4-1/2” EA 

Availability and finishes 

subject to change 

without notice. 


PATINAS, DYES, SEALERS, WAXES 

Patinas 

All Patinas available in 8 oz and 32 oz. 

Universal Patinas 

Item # 

UnivBlack Black 

UnivBlue Blue 

UnivBrown Brown 

UnivBurg Burgundy 

UnivVerde Verde Green 

Vista Patinas 

Item # 

VistaBlack Black 

VistaBlue Blue 

VistaBrown Brown 

VistaBurg Burgandy 

VistaRed Red 

Dye Oxides 

Item # 

DOPBk Black 

DOPBlGr Blue-Green 

DOPBlu Blue 

DOPBrw Brown 

DOPGrBl Green-Blue 

DOPGrn Green 

DOPOrg Orange 

Traditional 

Item # 

TPBM Black Magic 

TPFN Ferric Nitrate 

TPJG Jade Green 

TPJB Japanese Brown 

Stains & Dyes 

Solvent Dye 

All stains and dyes available in 8 oz and 32 oz. 

Item # 

SolvBlk Black 

SolvBluGrn Blue-Green 

SolvBlu Blue 

SolvBrw Brown 

SolvGrn Green 

Smart Stain 

Item # 

SStainK Black 

SStainE Blue 

SStainU Blue Green 

SStainB Brown 

SStainG Green 

SStainL Green Blue 

SStainO Orange 

Solvent Dye Thinner 

Item # 

SolvDTH-8 Solvent Dye Thinner 8 oz 

SolvDTH-32 Solvent Dye Thinner 32 oz 

Use Gilders Paste On: 

Metal -- Wrought Iron, Steel, Aluminum, 

Alloys, etc. 

Wood -- Moldings, Railings, Furniture, 

Gilding Restoration, Picture Frames, 

Miter Joints, etc. 

Ceramics -- Planters, Terra Cotta, etc. 

Resin -- Castings, Plastic, etc. 

Wax -- Candles, etc. 

Other Applications -- Antique 

Restoration, Crafts, Bisque Ware, 

Home Décor, Stone, Stenciling, Paper, 

Leather, Textiles, Gourds... 

Item # 

UnivWhite White 

UnivYellow Yellow 

UnivGreen Green 

UnivRed Red 

UnivRust Rust 

Item # 

VistaGrnNF Green, Non-Ferrous 

VistaGrnF Green-Ferrous 

VistaRust Rust 

VistaYlw Yellow 

Item # 

DOPPGrn Pea Green 

DOPRed Red 

DOPStGr Stealth Green 

DOPVlt Violet 

DOPWht White 

DOPYlw Yellow 

Item # 

TPLG Light Green 

TPMG Mint Green 

YPSB Slate Black 

TPTG Tiffany Green 

Item # 

SolvOrg Orange 

SolvRed Red 

SolvVilt Violet 

SolvYlw Yellow 

A rosette candle holder base 

done by a student in our 

blacksmithing class. It can be 

enhanced using metal finishes. 

Solvent 

Dye 

Item # 

SStainP Pea Green 

SStainR Red 

SStainS Stealth Green 

SStainU Verde 

SStainI Violet 

SStainW White 

SStainY Yellow 

Vista 

Patinas 

Bees Wax Block 

Baroque Art Gilders Paste 

Baroque Art Gilders Paste offers a collection of 28 various waxes, resins 

and high concentrations of pigments, for resistance to water and common 

chemical reagents with enhanced tint retention and hiding ability for coloring 

and highlighting interior and exterior applications. Packaged in 92ml cans. 

Item # 

GPAF African Bronze (metallic) 

GPAG Antique Gold (metallic) 

GPAP Apricot 

GPBL Black 

GPBR Bronze (metallic) 

GPCY Canary Yellow 

GPCB Celtic Bronze (metallic) 

GPCR Coral Red 

GPCU Copper (metallic) 

GPCM Cream 

GPDP Damson (Deep Purple) 

GPFB Foundry Bronze (metallic) 

GPGS German Silver (metallic) 

GPGL Gold (metallic) 

Sealers & Primers 

Smart Coat 

Item # 

SC1K-8M Matte 8 oz 

SC1K-QM Matte Quart 

SC1K-GM Matte Gallon 

SC1K-8S Satin 8 oz 

SC1K-QS Satin Quart 

SC1K-GS Satin Gallon 

Clear Guard 

PLF-32 Flat 32 oz 

PLF-1 Flat Gallon 

PLF-S Flat Spray 12 oz 

PLF-32 Satin 32 oz 

PLF-1 Satin Gallon 

PLF-S Satin Spray 12 oz 

Environmentally Friendly Spray 

PLF-32 Flat, EF Spray 12 oz 

PLF-32 Satin, EF Spray 12 oz 

Metal Oil 

MOK.8 Black 8 oz 

MOB.8 Brown 8 oz 

MOC.8 Clear 8 oz 

MOG.8 Green 8 oz 

MOR.8 Red 8 oz 

Primer 

VBWP-8 Water Base Primer (Prime It) 8 oz 

VBWP-32 Water Base Primer (Prime It) 32 oz 

VBWP-G Water Base Primer (Prime It) Gallon 

Renaissance Wax 

An extra-ordinary wax/polish. Restore, refresh and protect 

your antiques, cutlery, furniture, precious metals, copper, 

bronze, armory, collectibles, art, photography and much, 

much more. It’s uses are endless. The #1 choice of 

museums, galleries and professionals worldwide. 

Cleans, restores, polishes-safe even on papers, woods, 

leathers, stone and so much more! 

Item # 

RWAX-65ml Renaissance Wax 65 ml (2.25 fl oz) 

RWAX-200ml Renaissance Wax 200 ml (7 fl oz) 

RWAX-3L Renaissance Wax 3 Liter 

Bees Wax 

BW1 Bees Wax Bar 1 oz 

BWB Bees Wax Block 1 lb 

Rub it on warm metal to finish off your work; or use 

to quench your chisels or center punch. Work great 

on sanding belts to prevent clogging! 

Item # 

GPIB Iris Blue 

GPIG Inca Gold (metallic) 

GPOR Orange 

GPPA Patina 

GPPI Pinotage 

GPRG Rich Gold (metallic) 

GPRU Rust 

GPSL Silver (metallic) 

GPSLT Slate 

GPSW Sandalwood 

GPTR Tulip Red 

GPVD Verdigris 

GPVT Violet 

GPWT White (Antique) 


Prime It 

Renaissance 

Wax 

Bees Wax Bar

Magnets 

Item # 

PM Pencil Magnet 

To be used in conjunction with the nail magnet, 

the pencil magnet is inserted in the handle of 

the nailing-on hammer for easy nail retrieval! 

41608 Nail EZ Wrist Magnet 

Turns Your Wrist into a Magnet-Never Drop a small 

screw, nut, or pin again! The Nail EZ Wrist Magnet is 

an amazing tool. You wear it in your wrist. Eliminates 

the need to hold nails or screws between the teeth 

or lips. The comfortable band closes with Velcro. 

MAGN2 Ceramic Round Apron Magnet, 

Chrome Plated, 2” 

MAGN2.5 Ceramic Round Apron Magnet, 

Chrome Plated, 2-1/2” 

MAGN3 Ceramic Round Apron Magnet, 

Chrome Plated, 3” 

Perfect for sewing into farrier aprons to hold tools 

or nails. You can also use them to check heat 

treating or to subdue the loud ring from an anvil. 

Need to pick nails up quick? Magnets make this 

task a snap! 

HMKR-45 Base Magnet with Knob 

HMKR-70 Base Magnet with Knob 

Heavy duty magnetic bases -- ideal for warehouse, 

workroom and office use. Each magnet has durable 

nickel plating and easy-grip knob for positioning. 

MHHH20 Magnetic Plated Hook, 2.0” 

NA012500N Magnetic Plated Hook, 1.4” 

This magnet is assembled with an attached hook 

and has a 20 to 40 lbs pull. The 2” features a 

powerful ceramic magnet and the 1.40” features 

a neodymium magnet-both with a non-scratch liner. 

RHS02 Magnetic Retrieving Baton 

(Neodymium), 16” long 

Magnetic Retrieving Batons are innovative and 

powerful tools to remove fine metallic filings, 

turnings or shavings (also known as swarf) from 

wet or dry environments! Has a Quick Release! 

The non-corrosive, stainless steel housing 

separator comes with an easy-grip handle and 

hang hook. Use of safety goggles and gloves is 

highly recommended. 1” diameter 

07565 Telescoping Magnetic Pickup/ 

Pointer (Neodymium) 

Has a powerful neodymium magnet in the tip. 

Great for retrieving small metal objects such 

as nails, screws, washers, key rings and more. 

Doubles as a presentation pointer with a handy 

pocket clip attached. The top of this tool can be 

unscrewed to reveal a sharp tip for etching and 

marking metal, plastic and wood. The other end 

extends the tool from 6” to 25”. 3 lbs. pull. 

07577 Magnetic Knife & Tool Holder 

Magnetic Mount 

07579 Magnetic Knife & Tool Holder 

Screw Mount 

Powerful magnetic bars in flat black organize 

utensils and tools in the kitchen, shop or home 

office. Magnetic mount features magnets on 

front and back so bar attracts to metal surface 

for mounting. Screw mount features one-sided 

magnetism with mounting screws included. 

30 lbs. pull per inch. (W x H x D) 12 x 1 1/2 x 1” 

Kitchen 

Utensil 

Holder 

MAGNETS, SHARPENERS 

Pencil Magnet 

Wrist Magnet 

Ceramic Apron 

Magnet 

Base Magnet 

w/Knob 

Magnetic 

Plated Hook 

Magnetic 

Retrieving 

Baton 

Telescoping Magnet 

Magnet Knife 

and Tool Holder 

Item # 

AMC24PLC Screw Mount Magnetic Tool 

Holder 

Organize hammers, tongs, wrenches, 

screwdrivers and other tools! Perfect for use 

in garages, shops, service stations, RVs and 

even inside trucks and vans. 20 lbs. pull per 

inch, Screw Mounted. 24” Wide. 

Knife Sharpeners 

Item # 

FPDKS FPD Knife Sharpener (Solid) 

SEDKS Save Edge Knife Sharpener (Hollow) 

Both brands above are diamond coated, which 

allows them to maintain their durability. Leaves 

a smooth finish. 

10627 Nicholson Knife Honer/Sharpener 

American pattern, excellent for sharpening hoof 

knives, small knives, scissors, tubing cutters. 

0566 Carbide Knife Sharpener 

This hand sharpener fits in your pocket and 

gives you a really sharp knife in seconds. The 

long lasting sharpening tooth actually peels 

that dull edge away leaving a long bevel, super 

sharp edge. Instructions included. 

PP1 Smith’s “Pocket Pal” 

Multi-Functional Knife Sharpener 

This new Smith Sharpener features pre-set 

crossed carbides and ceramic stones, which 

provide the “Perfect Edge” every time. The 

carbide and ceramic stones are reversible and 

replaceable. A fold out, tapered round, diamond 

coated rod is designed for sharpening serrated 

as well as standard edges. Unit is compact, 

lightweight, durable, and comes with a lanyard 

hole. 

DRET Smith’s Reversible Sharpener 

Features an unbreakable, diamond coated steel 

rod, which is specially designed to sharpen all 

types of knives, including serrated. Multiple 

layers of medium grit, monocrystallin diamonds 

makes sharpening quick and easy, while still 

giving you that razor sharp edge on your knives, 

tools, or hooks. The rod is reversible and can be 

adjusted to variable lengths. It has a sharpening 

groove for hooks and a shirt pocket slip for easy 

storage. The unit is light, compact, and durable! 

3001 Smith’s 10” Sharpening Steel 

The ultimate in sharpening steel technology with 

the “World’s First” interrupted surface, diamond 

coated, oval sharpening steel. This innovation 

helps speed the sharpening process by collecting 

and holding the metal filings which ordinarily build 

up during the sharpening process. It comes with a 

soft grip rubber handle and oversized hand guard 

for comfort and safety. 

50002-9 Smith’s 9” Oval Ceramic 

Sharpening Rod 

Smith’s new is designed to quickly sharpen all your 

standard kitchen and household cutlery. It comes 

with an oversized hand guard for comfort and 

safety and hang up ring for easy accessibility. The 

non-slip rubber tip on the end of the sharpening 

rod protects your countertop from scratching and 

provides stability when sharpening. 

Carbide 

Sharpener 

9” Oval 

Ceramic 

Sharpening 

Rod 

FPD 

Knife 

Sharpener 

Save Edge 

Knife 

Sharpener 

Nicholson 

Honer 

Pocket Pal 

Finally, the 

perfect tool 

to sharpen 

hoof knives! 

Reversible 

Sharpener 

Smith’s 10” 

Sharpening 

Steel 


PLIERS, WRENCHES, RULES, BITS 

Pliers 

Crescent® 

C10SV Locking Pliers, 10” 

Straight Jaw 

Guarantees superior performance with a top quality 

design and improved durability. 1-3/4” jaw capacity 

stays adjusted for repetitive use. 

C10CV Locking Pliers, 10” 

and Wire Cutter, Curved Jaw 

Compound action for powerful non-slip locking 

grip, the versatile curved jaw also features integral 

wire cutter. 1-3/4” jaw capacity stays adjusted for 

repetitive use. 

C11CCV Locking C-Clamp Plier, 11” 

The Original Crescent® Locking C-Clamps (regular 

tips) with wide-opening jaws provide greater 

versatility in clamping a variety of shapes. Its 

guarded release trigger quickly unlocks and protects 

from accidental release. 4” jaw capacity stays 

adjusted for repetitive use. 

Wilton 

Industry’s top choice for maintenance, production 

and repair operations. Drop-forged steel frame, 

regular-duty with extra deep-throat, black oxide 

coated spindles and Perma-pad® resist corrosion, 

and are replaceable Innovative frame geometry 

for maximum strength. Made in the USA. 

14042 404U C-Clamp Black Spindle 

Height: 1.5”; Width: 5.5”; Length: 10.4”. 

Clamp Pressure: 6,200 Lbs; Opening: 0 - 4-1/4”; 

Throat Depth: 3-1/4” 

14070 408U C-Clamp Black Spindle 

Height: 1.5”; Width: 8.1”; Length: 15.6”. 

Clamp Pressure: 6,900 Lbs; Opening: 0 - 8-1/4”; 

Throat Depth: 5” 

Tin Snips 

Item # 

MPC3 Metal Wiss® Snips, 9” 

This is perfect for cutting copper sheet! Cuts curves, 

straight or any combination. Designed for 

multi-purpose use for the home craftsman. 

Wrenches 

AC8NKWMP Crescent® Rapid Slide Wrench, 8” 

Slide adjuster positioned in handle of wrench allows 

quicker jaw adjustment compared with knurled 

adjuster found on traditional adjustable wrenches. 

Features: 1” jaw capacity, SAE/Metric, wide handle, 

forged steel with chrome finish, slider debris shield 

maintains a smooth operation. 

Wilton 

Drop Forged upper and lower jaws with heavy duty 

adjustable ring. Ductile cast iron handle. Floating 

hook jaw with spring suspension for easier 

gripping. Made in the USA. 

38110 Ductile Pipe Wrench, 10” 

1-1/2” pipe capacity 

38114 Ductail Pipe Wrench, 14” 

2” pipe capacity 

Rules 

Item # 

86 Lufkin Steel Folding Rule, 2 ft 

Rule comes to a firm stop when opened straight. 

3/4” x 2’, 1/32” thick, 1-fold, tempered steel rule with 

legible, permanent, deeply etched black markings. 

Lower edge on one side is graduated to 1/16ths of 

an inch, upper edge on other side to 1/8th. Lower 

edge 75 deg. circumference is in inches to 1/8th, 

for converting diameters directly to circumference 

measurements. 

Crescent Locking 

Pliers 


Pliers and 

Wire Cutter 


C-Clamp Pliers 

Wilton C Clamp 

Wiss Snip 

Crescent Wrench 

Wilton 

Ductile Pipe 

Wrench 

Lufkin Steel 

Folding Rule 

Rules (continued) 

Item # 


PTBR Pieh Tool Brass Folding Rule 

2 foot, 1 fold brass ruler features measurements 

in the metric system as well as in inches. 

Pieh Steel Rules 

Our rules are made of 14 gauge, 304 stainless 

steel and successfully resist rust. All numbers 

and lines are laser-etched into the tool. 

PTSQ.S Pieh Steel Square, 6” 

PTSQ.ST Pieh Steel Tri-Square, 6” 

The Tri-Square has an extra clip-on piece 

allowing it to be held upright hands-free. 

PTHR2 Pieh Tool Hook Rule Gauge 

Quickly determine stock sizes without the 

hassle of a tape measure. The slots are used 

to determine the diameter of round stock, the 

size of square stock and the thickness of flat 

bar. The other side of the Hook Rule Gauge is 

used to determine the width of flat bar. 

PTPR6 Pieh Round Protractor, 6” 



This extremely handy tool is a must for 

those who need to layout accurate angles for 

fabrication, blacksmithing and woodworking 

among other situations. 

Pieh Steel Rulers are MADE IN USA 

Silver Pencils 

Item # 

92910-01 Silver Welders Pencil, 3 Pack 

Marks clearly on raw metal with a fine line layout. It 

actually “Illuminates” when welding or cutting. This 

is by far the best, most effective metal marking tool 

on the market. Ditch the soapstone and other metal 

marking tools, try a pack of these today! 

Soap Stone 

Item # 

SOAP Soap Stone 

Soapstone for metal marking temporarily marks 

metal surfaces during fabrication. It is all natural 

for smooth marking and will not contaminate 

welds. Easily removes from workpiece. 

1/4 x 5” 

Welding Magnets 

Item # 

WMA50 Welding Angle Magnet, Arrow 

Strong magnets attract to any ferrous metal 

object and leaves both hands free to safely 

work on the project. Ideal for fast setup and 

accurate holding for all welding jobs. The 

arrow model covers 45, 90 and 135 degree 

welding angles. But not recommended for lifting 

applications, magnet has a pull rating of 50 lbs. 

Measures 6 1/8 x 4.0” x 5/8”. 

WMRB80 Magnetic Welding Ground 

Strong gripping power holds securely to 

ferrous metal work, providing positive ground 

for welding applications. Ideal for pipe that 

regular grounding clamps cannot grab. 

3 1/2 x 2 1/4”. Spring-loaded stud keeps constant 

contact. Copper stud provides 800 amps. 

Handle rotates 360 degrees and pull of 95 lbs. 

Pieh Tool Brass 

Folding Rule 

Pieh Square & 

Tri-Square 

Pieh Tool Hook 

Rule Gauge 

Pieh Tool Protractor 

Silver Pencils 

Soap Stone 

Welding Angle Magnet 

Magnetic Welding 

Ground 


Utility Tools, Saws 

Folding Jab Saw 

Item # 48-22-0305 

• Tool Free Blade Change: 10X Faster 

• Folding Blade: Easier and Safer Storage 

• Rubber Over Mold Grip: Increased Comfort 

• Accepts All Sawzall Blades: Versatility 

• Length: 13”, Tool Weight: 0.64 lbs 

Fastback Utility Knife 

Item # 48-22-1901 

• Flip Blade Open: One Handed 

• Tool Free Blade Change 

• Wire Stripper: Strip up to 10 Gauge 

• Integrated Gut Hook; Slim Design 


Deep Cut Variable Speed Band Saw Kit 

Item # 6232-21 

Specifications 

Voltage 120 AC 

Amps 11 

SFPM 0-380 

Capacity 5” x 5” 

Debris Protect. Yes 

Variable Speed Trigger/Dial 

Length 21” 

Tool Weight 14.5 lbs 

Includes 8’ Cord, Blade, Carrying Case 

Orbital Super SAWZALL ® 

Recip Saw 

Item # 6536-21 



Amps 13 

Stroke 1 1/4” 

SPM 0-3,000 

Length 18 3/4” 


Includes Blade, Carrying Case 

Abrasive Chop Saw Cut-Off 

Machine 14” 

Item # 6177-20 


Voltage 120 AC/DC 

Amps 15 

HP - Max 4 

RPM 3,900 

Arbor/Spindle 1” 

Wheel Size 14” 

Length 16” 

Tool Weight 40 lbs 

Includes 8’ Cord, Vise, Abrasive 

Wheel, Hex Wrench 

POWER TOOLS-CORDED& UTILITY 

TOOLS 

5 

Year 

Warranty 

• 

• 

Job Site Armor Composite: Long Lasting 

All Metal Direct Drive, Gear Protecting Clutch 

SPM 0-3,000 

• Maintains Cut Speed in Toughest Applications Length 19” 

• Revolutionary Cut Visibility: Superior Cut Accuracy Tool Weight 7.1 lbs 

• Balanced Slimmer Design: Comfortable to Hold 

• Built-In LED Light: Illuminates Cut Line 

• Button Actuated Locking Adjustable Shoe 

• Industry’s Largest Cut Capacity Includes Blade, Carrying Case 

5 

Year 

Warranty 

• Fast Orbital Cutting Action 

• Variable Speed Trigger 

• Counter Balanced/Gear Protection Systems 

• QUIK-LOK Blade Clamp: Fast Blade Change 

• Impact Resistant Case: Accessory Storage 

• 8’ Cord 

5 

Year 

Warranty 

Lifetime 

Warranty 

Includes (3) Recip Blades 

Lifetime 

Warranty 

Includes (5) Utility Blades 

• Capacity: 5” Square/Round; 4 5/8” Barstock 

• Bevel Miter Capacity: 45° 

• Durable Light Weight Design 

• Oversized Wheel Guards: Debris Protection 

• 45° Miter Capacity, Adjustable Fence 

• Large Spindle Lock Button: Easy Blade Change 

• Quick Adjust Vise Clamp; Ball Bearing Construction 

Side Slide Utility Knife 

Item # 48-22-1910 

• Side Slide Blade, Tool Free Blade Change 

• Integrated Gut Hook 

• Rubber Over Mold Grip: Increased Comfort 

• Blade Storage: Store up to 5 Blades 


ProPEX ® /Tubing Cutter 

Item # 48-22-4200 

• Replaceable V Blades: Clean Cut on 1” Tubing 

• All Metal Core with Rust Protection 

• Rework Groove: Correct Mistakes 

• Locking Mechanism: One Handed 


SAWZALL ® Recip Saw Kit, 3/4” 

Item # 6509-31 



Amps 12 

Stroke 3/4” 

Metal Cutting Circular 

Saw Kit, 8” 

5 

Year 

Warranty 

FREE SHIPPING! 

MILWAUKEE ORDER’S >$100 

*IN CONTINENTAL U.S. 

Lifetime 

Warranty 

Includes (5) Utility Blades 

Includes Blade 

Lifetime 

Warranty 

• High Performance: Cuts Most Materials 

• 3/4” Stroke Length: Maximum Cut Control 

• Gear Clutch: Protects Gear and Motor 

• Counter Weighted: Reduces Vibration 

• QUIK-LOK Blade Clamp: Fast Blade Change 

• Redesigned Grip: Best in Class for Ergonomics 

• Cut Speed & Durability: Best in Class 

• 8’ Cord 

Item # 6370-21 5 



Year 

Warranty 

Amps 13 

• Dry-Cut Technology: Faster, Cleaner Cutting 

RPM 3,700 

Arbor/Spindle 5/8” 

• 

• 

• 

Chiptank Deflects/Collects Hot Chips & Sparks 

Plunge Lever: Fast, Effective Plunge Cuts 

Quick-Release: Waste Disposal/Blade Changes 

Blade Size 8” 

• One Pass Cut Depth: 2-9/16” (most materials) 

Length 16 1/2” • Premium Cermet-Tipped Blades Cut Faster 

Tool Weight 13.3 lbs • Right Sided Blade; Capacity at 90°: 2-9/16” 

Includes 15’ Cord, Hex Blade Wrench, Circular Saw Blade, Carrying Case 

PORTABLE POWER TOOL – FIVE YEAR LIMITED WARRANTY 

Every MILWAUKEE power tool (including cordless product – tool, battery 

pack(s) - see separate & distinct CORDLESS BATTERY PACK LIMITED 

WARRANTY statements & battery charger and Work Lights*) is warranted 

to the original purchaser only to be free from defects in material and workmanship. 

Subject to certain exceptions, MILWAUKEE will repair or replace 

any part on an electric power tool which, after examination, is determined 

by MILWAUKEE to be defective in material or workmanship for a period of 

five (5) years* after the date of purchase unless otherwise noted. 

HAND TOOL – LIMITED LIFETIME WARRANTY 

Every MILWAUKEE hand tool is warranted to the original purchaser only 

to be free from defects in material and workmanship. Subject to certain 

exceptions, MILWAUKEE will repair or replace any hand tool which, after 

examination, is determined by MILWAUKEE to be defective in material or 

workmanship for the lifetime of the tool. 


POWER TOOLS-CORDED 

Drills, Grinders & Shear 

Magnum® 1/2” Drill, 850 RPM 

Item # 0299-20 



Amps 8.0 

RPM 0-850 

Chuck 1/2” Keyed 

Construction Grounded 

Trigger Lock On 

Length 12-13/64 


Includes Side Handle, Chuck Key 

with Holder 

Small Angle Grinder 4 1/2”, 7 Amp 

Item # 6130-33 



Amps 7.0 

RPM 11,000 

Wheel Dia. 4 1/2” 

MWO 750 

Spindle Thread 5/8-11” 



Large Angle Grinder 7” - 9” 

Item # 6088-30 



Amps 15.0 

RPM 6,000 

Wheel Dia. 7 - 9” 

MWO 3,130 


Length 21” 


Includes 7” & 9” Type 27 Guard, 

Side Handle, Flanges, Spanner Wrench 

Polisher 7” - 9” 

Item # 5540 



Amps 11.0 

RPM 0-2,800 

Pad 7” 

Switch Type Trigger 




Includes Side Handle, 7” Rubber 

Backing Pad, Disc Nut, Nylon Washer 

5 

Year 

Warranty 

• Variable Speed Control 

• Heavy-Duty Keyed Chuck 

• All Metal Gear Case and Diaphragm 

• 8’ 3-Wire Rubber Cord 

• 360° Locking Side Handle 

• Capacity: Wood 1 1/2” - 2 9/16”, Metal 2” 

• Spindle: 1/2-20” 

• Ergonomic Textured Grip, Two Finger Trigger 

5 

Year 

Warranty 

• Compact, Lightweight Design 

• 750 Max Watts Motor: Everyday Applications 

• Debris Baffles: Protect Internal Components 

• Multi-Port Exhaust: Reduces Motor Burn-Up 

• Tool Free, Burst Resistant Guard 

• 8’ Double Insulated Cord; Slide Lock On 

Includes Type 27 Guard, Spanner Wrench 

5 

Year 

Warranty 

• Optimal Wheel Speed for Stock Removal 

• External Brush Doors, Trigger with Lock On 

• High Overload Protection & Electronic Clutch 


• Tool Free Accessories/Burst Resistant Guards 

• 8’ Double Insulated 2 Wire Cord; Slide Lock On 

• Spiral Bevel Gears 

• Epoxy Motor Protection: 25+% Longer Lasting 

5 

Year 

Warranty 

• Low Variable Speed: Ideal for Knifemakers 

• Powerful 11 A Motor, AC Only 

• Spindle Lock: Convenient Accessory Change 

• Aluminum Gear Case: Protective Urethane Bumpers 

• Accepts 7” or 9” Accessories 

• 10’ Double Insulated QUIK-LOK® Cord 

• All Ball & Roller Bearings 

Built for long life with plenty of power! 

Magnum® 1/2” Drill, 950 RPM 

Item # 0234-6 



Amps 5.5 

RPM 0-950 

Chuck 1/2” Keyed 

Construction Grounded 




Includes Side Handle, Chuck Key 

with Holder 

Small Angle Grinder, 4 1/2”, 11 Amp 

Item # 6146-33 



Amps 11.0 

5 Year 

Warranty 

RPM 11,000 

• Overload Protection & Electronic Clutch 

Wheel Dia. 4 1/2” 


MWO 1,400 

• Multi-Port Exhaust: Reduces Motor Burn-Up 



• Tool Free Accessories/Burst Resistant Guard 

• 8’ Double Insulated 2 Wire Cord; Slide Lock On 

More durable & 50% more power than the 


competition. 

Includes Type 27 Guard, Side Handle, Flanges, Spanner Wrench 

Die Grinder 

Item # 5192 



Amps 4.5 

RPM 21,000 

Collet Dia. 1/4” 

Trigger Lock On/Off 

Wheel 2” Reinforced 



Includes 11/16” Open End Wrench, 

1/2” Open End Wrench 

Shear 18 Gauge 

Item # 6852-20 



Amps 6.8 

SPM 0-2,500 

Switch Type Trigger 


Cutting Radius 7” 



Includes Hex Wrench 

5 

Year 

Warranty 

• Trigger Speed Control with Reverse 

• Heavy-Duty Industrial Chuck 

• 8’ 3-Wire QUIK-LOK® Cord 

• Brush Cartridge System Changes $100 


• Magnesium Gear Case: Superior Balance 

• Capacity: Steel 18 Gauge; Stainless 20 Gauge 

• 360° swivel head 

• Ergonomic Tactile Grip 

• 10’ Flexible Durable Runner Cord 


M18 Cordless LITHIUM-ION 1/2” High Torque 

Impact Wrench Kit/ Pin Detent or Friction Ring 

Item # 2662-22 (Pin) Item #2663-22 (Ring) 


5 

Voltage 18V 

Year 

Warranty 

Anvil (2 Options) 1/2" Square* 

IPM 0-2,200 

RPM 

Torque 

Battery 

0-1,900 

450 ft-lbs 

RED LITHIUM 

• 

• 

• 

• 

Milwaukee® 4-Pole Frameless Motor 

High Torque: 450 ft-lbs 

Compact & Lightweight 

Option: Pin Detent for Max Socket Retention 


• Option: Friction Ring for Easy Socket Change 



Includes (2) M18 XC High Capacity Lithium-Ion Batteries, 1 hour Charger, Kitbox 

POWER TOOLS-CORDLESS 

Cordless Lithium-Ion Drivers & Drills - Longer run-time! 

M12 Cordless LITHIUM-ION 

1/4” Hex Impact Driver Kit 

Item # 2450-22 


Voltage 12V 

Anvil 1/4" Hex 

5 Year 

Warranty 

IPM 

RPM 

Torque 

0-3,000 

0-2,000 

850 in-lbs 

• 

• 

• 

• 

Delivering a best-in-class 850 in-lbs Torque 

Drives 75% Faster and 2X Longer 

0-3000 Impacts Per Minute 

Compact & Lightweight 

Battery RED LITHIUM • Variable Speed Trigger 


• On-Board Fuel Gauge: Displays Run-Time 


• Built-In LED Light: Illuminates Work Surface 

Includes (2) M12 Lithium-Ion Batteries, 30 minute Charger, Carrying Case 


1/2” Drill Driver Kit 

Item # 2601-22 


Voltage 18V 

Clutch 21 Settings 

RPM 0-500 / 0-1,500 

Torque 425 in-lbs 

Battery RED LITHIUM 



Includes (2) M18 XC High Capacity 

Lithium-Ion Batteries, 30 minute 

Charger, Carrying Case 


1/2” Hammer Drill Driver Kit 

Item # 2602-22 


Voltage 18V 

Speed 2 

BPM 0-29,000 

RPM 0-550 / 0-1,700 






Lithium-Ion Batteries, 1 hr Charger, Kitbox 




5 

Year 

Warranty 

• Milwaukee® 4-Pole Frameless Motor 

• Compact & Lightweight 

• 21 Clutch Settings 

• 2-Speed Metal Gear Box 

• 1/2” Metal Single Sleeve Ratcheting Chuck 

• Capacity: Steel 1/2” / Wood 1” 



5 

Year 

Warranty 

Shown with 

Carrying Case 

• 20% faster in concrete than the competition 

• Milwaukee® 4-Pole Frameless Motor 

• Compact & Ergonomic Design 

• DPM - Digital Power Management 

• 2-Speed Metal Gear Box: Only in its class 


• Variable Speed - Reversible 


Industry’s 

Number One 

Sub-Compact System 


1/4” Hex Impact Driver Kit 

Item # 2650-21 


Voltage 18V 

Anvil 1/4" Hex 

5 Year 

Warranty 

IPM 

RPM 

0-3,200 

0-2,200 

• 

• 

• 

1/4” Hex Quick Change Chuck 

Milwaukee 4-Pole Frameless Motor 

Impact Mechanism - Better Driving Speed/Torque 

Torque 1400 in-lbs • Belt Clip - Allows for Easy Portability 

Battery RED LITHIUM • Variable Speed Trigger 





Includes (2) M18 XC High Capacity Lithium-Ion Batteries, 1 hr Charger, Belt Clip, Carrying Case 


3/8” Drill Driver Kit 

Item # 2410-22 


Voltage 12V 

Speed 2 

RPM 0-400 / 0-1,500 





Includes (2) M12 Lithium-Ion Batteries, 30 minute Charger, Carrying Case 


3/8” Hammer Drill Driver Kit 

Item # 2411-22 


Voltage 12V 

Speed 2 

BPM 22,500 

RPM 0-400 / 0-1,500 





Includes (2) M12 Lithium-Ion 

Batteries, 30 min Charger, Carrying Case 


1/4” Screwdriver Kit 

Item # 2401-22 


Voltage 12V 

Speed Variable 

Clutch Settings 14 + 1 

RPM 0-500 



Length 7” 



Batteries, 1 hour Charger, Storage Bag 

Fastest Growing 

Lithium-Ion 

Cordless System 

5 Year 

Warranty 

• Up to 35% faster drilling, fastening than its Competition 

• Powerful Motor: 25% More Torque in its Class 

• Compact & Lightweight - Tool Belt Portable 

• Reversible 2-Speed Metal Gear Box 




5 

Year 

Warranty 

• Industry’s 1st Sub-Compact Hammer Drill Driver 

• Power, Speed, Durability: Best in Class 

• Compact & Lightest on the Market 

• 2-Speed Metal Gear Box 




5 

Year 

Warranty 

• Battery drives 130 3” screws on one charge 

• 1/4” Hex Chuck allows one handed bit changes 

• Lightweight-Subcompact 

• Spindle Lock 

• Over-Mold Side and Grip 

• Metal Gear Box 


• Capacity: Steel 1/4” / Wood 1/2” 




POWER TOOLS-CORDLESS 

Cordless Lithium-Ion Saws & Tool Kits - Longer run-time! 


HACKZALL Recip Saw 

Item # 2420-21 


Voltage 12V 

Stroke Length 1/2" 

SPM 0-3,000 


Length 11” 



|Battery, 30 minute Charger, 

(2) Hackzall Blades, Contractor Bag 

5 

Year 

Warranty 


Band Saw Kit 

• Compact: Only 11” for Cutting in Tight Spaces 

• Keyless QUIK-LOK Blade Replacement Clamp 

• All-Metal Gear Case 



• Accepts HACKZALL & SAWZALL® blade 


Item # 2629-22 


Voltage 18V 

5 Year 

Warranty 

Blade Length 35 3/8” • Compact & Lightweight - For Cutting Overhead 

SFPM 480 

• 3-1/4” Round Cut Capacity: Cuts most Materials 

Speed 390/480 • Single Cut: Copper/Angle Iron 3”, Conduit 2-1/2” 

Capacity (Rect) 3-1/4” x 3-1/4” 


• 

• 

• 

Tool-Free Adjustable Material Shoe 

Built-In LED Light: Illuminates Cut Line 

Blade Ejection System 

Length 18” 

• Drop Resistant Pulley Guard 

Tool Weight 10.25 lbs • Cast Aluminum Gear Case 

Includes (2) M18 XC High Capacity Lithium-Ion Batteries, 1 hour Charger, Blade, Carrying Case 


5-3/8” Metal Saw Kit 

Item # 2682-22 


Voltage 18V 

5 Year 

Warranty 

Arbor 20mm 

RPM 

Blade 

Battery 

3,600 

5-3/8” 30T/50T 

RED LITHIUM 

• 

• 

• 

• 

Milwaukee® 4-Pole Frameless Motor 

Compact/Lightweight: Low-Profile Design 

Extra-Large Cut Guide/Polycarbonate Guard 

Stainless Steel Shoe/Impact Resistant Window 

Length/Width 14” x 6 1/2” • Tool-Free Depth Adjustment/Capacity: 1/8”- 2” 

Tool Weight 5.8 lbs • 30T METAL TECH Carbide-Tipped Blade 

Includes (2) M18 XC High Capacity • Built-In LED Light: Illuminates Cut Line 

Lithium-Ion Batteries, 1 hr Charger, Carbon Produces cool, burr-free cuts in EMT, strut, 

Tipped Blade, Wrench, Contractor Bag threaded rod, sheet metal and angle iron. 


4-Tool Combo Kit 

Item # 2696-24 

Kit Contents 

5 

Year 

Warranty 




1. M18 Cordless ½” Hammer Drill/Driver - Item # 2602 

2. M18 Sawzall® Reciprocating Saw - Item # 2620 

3. M18 ¼” Hex Impact - Item # 2650 

4. M18 Work Light with 35° Rotating Head - Item # 49-24-0171 

• DPM - Digital Power Management: Overload protection prevents damage 

to the tool and battery in abusive situations 

• Compatibility: Works with M18 XC High Capacity RED LITHIUM Batteries 

and M18 Compact RED LITHIUM Batteries 

Includes (2) M18 XC High Capacity Lithium-Ion Batteries, 

Sawzall Blade,1 hour Charger, Contractor Bag 


SAWZALL® Recip Saw Tool Kit 

Item # 2620-21 


Voltage 18V 

Stroke Length 1” 

SPM 0-3,200 




Includes (1) M18 XC High 

Capacity Lithium-Ion Battery, 1 hour 

Charger, Sawzall Blade, Carrying Case 


High Performance Jig Saw Kit 

Item # 2445-21 


Voltage 12V 

Stroke 3/4” 

SPM 0-2,800 

Bevel 45° 

Trigger Variable Speed 


L x W x H 8 3/4 x 3 x 7” 


Includes (1) M12 Lithium-Ion Battery, 

30 min Charger, Jig Saw Blade , Anti- 

Splintering Insert, Shoe, Contractor Bag 

5 

Year 

Warranty 


6-1/2” Circular Saw Kit 

Item # 2630-22 


Voltage 18V 

Industry’s 

Number One 


• Patented Gear-Protecting Clutch Extends Life 

• Lever Action QUIK-LOK Blade Clamp 

• 75+ cuts per charge 

• Cuts 30% Faster with Less Vibration 



5 

Year 

Warranty 

Arbor 5/8” 

• Heavy-Duty Magnesium Guards 

RPM 3,500 

• Ergonomic, Compact, Lightweight 

Blade 6 1/2 24T (CT) • Electronic Brake: Stops Blade Quickly 


• Aircraft Aluminum Shoe: Greater Accuracy 



• Lock Off Trigger 

Tool Weight 8.5 lbs • Capacity: 2-1/8” @ 90°, 1-5/8” @ 45° 


For lightweight cutting applications in plumbing, 

Lithium-Ion Batteries, 1 hr Charger, Saw 

Blade, Rip Fence, Wrench, Contractor Bag electrical, framing, finishing & carpentry. 

5 

Year 

Warranty 


2-Tool Combo Kit 

Item # 2698-22 

Kit Contents 


Lithium-Ion 


• Compact and Lightweight 

• Innovative Hybrid Grip: Maximum Control 

• Powerful Cutting: Fast, Controlled Cutting 

• Quik-Lok T-Shank Blade Clamp: Quick Changes 

• Tool-free Bevel Capability: Positive Lock at 900 

• Smooth Balanced Cutting: Minimized Vibration 



5 

Year 

Warranty 

1. M18 1/2” Hammer Drill Driver - Item # 2602-20 

2. M18 5-3/8” Metal Saw - Item # 2682 

• DPM - Digital Power Management: Overload protection prevents damage 

to the tool and battery in abusive situations 

• Compatibility: Works with M18 XC High Capacity RED LITHIUM Batteries 

and M18 Compact RED LITHIUM Batteries 

Includes (2) M18 XC High Capacity Lithium-Ion Batteries, 30T METAL TECH 

Carbide-Tipped Blade, Blade Wrench, 1 hour Charger, Contractor Bag 



Copper Tubing Cutter 


PVC Shear Kit 

Item # 2470-21 


Voltage 12V 

Torque 1,900 in-lbs 

Blade 3mm SS 

Blade Wrench On-Board Storage 

Switch Type 2 Action VS 





Battery, 30 min Charger, Carrying Case 


Item # 2266-20 


Temperature -20 to 932°F 

Accuracy 1.50% 

Distance Ratio 12 to 1 

Resolution 0.1F 

Response $100 


Speciality Power Tools 

Item # 2471-21 


Voltage 12V 

Blade Copper Cut Wheel 

5Year 

Warranty 

Trigger Cut/Reset to Open 

Speed 

RPM 

Battery 

2 

500 

RED LITHIUM 

• 

• 

• 

Close Quarter Rotating Cutting Head 

Cuts Pipe in Confined Spaces 

Automatic Adjustment from 3/8” - 1” Tubing 

Length 14” 

• Auto Locking Mechanism: 200 Cuts per Charge 

Tool Weight 3.2 lbs • Water Resistant Sealed Metal Cutter Head 


Battery, 30 min Charger, Carrying Case 

• 

• 

Capacity: 1/2” to 1 1/8” O.D. 

On-Board Fuel Gauge: Displays Run-Time 


M18 Cordless LITHIUM-ION Palm Nailer Kit 

Item # 2458-21 


Voltage 12V 

Anvil (2 Options) 1/2" Square* 

5Year 

Warranty 

BPM 2,700 

Blow Energy 2.2 ft/lbs 

Collet 6D-16D • Industrial Magnetic Collet: One-Handed Use 

Battery RED LITHIUM • Metal Gear Housing: Durable 

Width/Height 

Length 

2 1/2 x 6 1/2” 

7 1/2 

• 

• 

• 

Palm Style Ergonomics: Superior Comfort 

Built-In LED Light: Illuminates Work Surface 

Compatibility - Works with both M12 RED 


LITHIUM Batteries and 25+ M12Tools 

Includes (1) M18 XC High Capacity Lithium-Ion Battery, 30 min Charger, Hand Strap, Tool Bag 

• User Configurative Hi/Low Alarm Settings 

• K-Type Thermocouple Input: Contact Temperature 

• Display: High Contrast, White on Black/Backlight 

• Durable: Rugged Over-Molding 

• Hold, Max Value Functions, Work Light 

• Slide Rail Mount: 2201 Voltage Detector 

Recommend sending in for calibration service 

once every year. 

Industry’s 

Number One 


Item # 2426-21 


Voltage 12V 

Speed Variable (12) 





Grease Gun 


Lithium-Ion 


M12 Cordless LITHIUM-ION Multi-Tool Kit 


Rotary Tool Kit 

Item # 2460-21 

Item # 2446-21XC 


Voltage 12V 

5Year 

Warranty 

PSI 8,000 

Run Time 7 Carts/Charge • Powerful: Over 8,000 PSI Operating Pressure 

Cart Capacity 14-16 oz 


Length 14” 

• 

• 

• 

• 

Three Way Loading: Bulk, Cartridge & Suction 

Superior Balance & Ergonomics 

Integrated Hose Storage, LED Fuel Gauge 

Air Bleeder Valve: Primer for Quick Flow 

Tool Weight 7.2 lbs • Compatible: With over “20” M12 Tools 

• Hose: 36” High Pressure Flex Hose/Spring Guard 

Includes (1) M12 Lithium-Ion Battery, 30 minute Charger, Grease Coupler, Carrying Case 

Voltage Detector with LED 

Item # 2202-20 

Voltage 150 - 1000 AC 

Length 6” 


Includes (2) AAA Batteries 


1Year 

Warranty 

• Cuts, Grinds, Sands and Scrapes 

• Variable Speed Dial: 12 settings, 5,000-20,000 

• Compatibility Adapter Included 


Includes (2) M12 Lithium-Ion Batteries, 30 min Charger, 

Accessory Adaptor, Wood Cutting Blade Storage Bag 


Voltage 12V 

• Cuts, Grinds, Sands RPM 5,000-32,000 

• Variable Speed Dial Battery RED LITHIUM 

• On-Board Fuel Gauge Length 9 1/2” 


Battery, (5) Cutting Wheels, 

Mandrel, Wrench & 30 min Charger 


Variable Temperature Heat Gun 

Item # 8977-20 

Specifications 5 Voltage 120 AC 

Year 

Amps 11.6 

Temperature 140° F 

CFM 14.8 



Voltage 12V 

Modes AM/FM/AUX 

Equalizer Yes 

Dimensions 10.5’’ x 4’’ x 7’’ 

Weight 3.5 lbs 

Includes (2) AAA Batteries, 

AC Adaptor (Red Lithium not included) 

Warranty 

• Variable Temperature: 140° F - 1040° F 

• Impact Resistant Heating Element 

• Efficient Soft Air Velocity: Faster Even Heating 

• Dial Air Flow & Temperature Control 

• Stay Cool Handle; 8’ Cord 

• Safety Category Rating: CAT IV 1000V 

• Scan for AC Electrical 

• Non-Contact Voltage 

• Audio/Visual Indication; LED Work Light 

M12 Cordless LITHIUM-ION RADIO 

Item # 2590-20 

Specifications 5 Year 

Warranty 

• Premium Weatherproof Aluminum Speakers 

• Weather Sealed MP3 Compartment 

• Shock Absorbing ABS Polymer Housing 

• Power: M12 RED LITHIUM Battery or AC

ABRASIVE WHEELS/DISCS 

Cut-Off Wheels & Grinding Discs 

Premium Abrasive Cut-Off Wheels 

For Stationary Units 

Item # Dia. Width Arbor Material Use 

49-94-1405 14” 3/32” 1” Alum. Oxide GP-Metal 

49-94-1410 14” 3/32” 1” Alum. Oxide Metal Stud 

49-94-1415 14” 3/32” 1” Alum. Oxide GP-Metal 

For Hand Held Units 

49-94-1485 14” 1/8” 1” Sil. Carbide Masonry 

Abrasive Cut-Off Wheels - Reinforced Center Type 1 


49-94-4500 4-1/2” .045” 7/8” A60T Metal, SS 

Abrasive Cut-Off Wheels - Reinforced Depressed Type 27 


49-94-4505 4-1/2” .045” 7/8” A60T Metal, SS 

49-94-5005 5” .045” 7/8” A60T Metal, SS 

49-94-6305 6” .045” 7/8” A60T Metal, SS 

Abrasive Grinding Discs - Reinforced Depressed Type 27 


49-94-4510 4-1/2” 1/8” 7/8” A30S Pipe, Light 

49-94-4515 4-1/2” 1/4” 5/8”-11 A24R Metal, SS 

49-94-4520 4-1/2” 1/4” 7/8” A24R Metal, SS 

49-94-4525 4-1/2” 1/8” 5/8”-11 A30S Pipe, Light 

49-94-4570 4-1/2” 1/4“ 7/8“ C24T Concrete 

49-94-4580 4-1/2“ 1/4” 7/8” ZA24R Metal 

49-94-4585 4-1/2” 1/4” 5/8”-11 ZA24R Metal 

Wire Wheels 

Wire Wheels - Stringer Bead 

Item # Dia. Arbor Material 

48-52-2220 4” 1/2”-13 Carbon Steel 

48-52-5010 4” 5/8”-11 Carbon Steel 

48-52-5000 4” 5/8”-11 Stainless Steel 

48-52-1700 5” 5/8”-11 Carbon Steel 

48-52-1715 6” 5/8”-11 Carbon Steel 

Wire Wheels - Cable Twist Knot 


48-52-5030 4” 5/8”-11 Carbon Steel 


48-52-1725 6” 5/8”-11 Carbon Steel 

Wire Wheels - Radial Crimped 


48-52-5070 4” 5/8”-11 Carbon Steel 

Wire Wheel Brushes 

Wire Brush - Crimped Wire Cup 


48-52-5060 3” 5/8-11 Carbon Steel 

48-52-5065 3-1/2” 5/8”-11 Carbon Steel 

48-52-1300 4” 5/8”-11 Carbon Steel 

48-52-1400 5” 5/8”-11 Carbon Steel 

48-52-1600 6” 5/8”-11 Carbon Steel 

Wire Wheel Brushes - Knot Wire Cup 


48-52-5040 2-3/4” 5/8”-11 Carbon Steel 

48-52-5050 2-3/4” 5/8”-11 Stainless Steel 

48-52-5067 3-1/2” 5/8”-11 Carbon Steel 

48-52-1350 4” 5/8”-11 Carbon Steel 

48-52-1650 6” 5/8”-11 Carbon Steel 

Wire Wheel Brushes - Bevel Crimped 



48-52-1325 4” 5/8”-11 Carbon Steel 

TW Cloth 

Backing 

Plate 




Wire Wheel Brushes - Bevel Knot 


48-52-1305 4” 5/8”-11 Carbon Steel 


Flap Discs 

Flap Discs - Type 27 

Item # Dia. Arbor Grit 

48-80-8110 4-1/2” 5/8”-11 36 

48-80-8111 4-1/2” 5/8”-11 60 

48-80-8112 4-1/2” 5/8”-11 80 

Flap Discs - Type 29 

Item # Dia. Arbor Grit 

48-80-8011 4-1/2” 5/8”-11 60 

48-80-8010 4-1/2” 5/8”-11 36 

48-80-8012 4-1/2” 5/8”-11 80 

48-80-8000 4-1/2” 7/8” 36 

48-80-8002 4-1/2” 7/8” 80 

48-80-8040 7” 5/8”-11 36 

48-80-8041 7” 5/8”-11 60 

48-80-8042 7” 5/8”-11 80 

48-80-8030 7” 7/8” 36 

48-80-8031 7” 7/8” 60 

48-80-8032 7” 7/8” 80 

Buffing Wheels 

Cloth Rings 


48713 6” 3/4” Sisal Fabric 

Pre-polishing of aluminum or brass with grey polishing paste. 

Pre-polishing of non-ferrous metals with brown polishing paste. 

48733 6” 3/4” TW Soft Cloth 

High-gloss polishing of all metals with pink polishing paste. 

High-gloss polishing of plastics with beige polishing paste. 

Hook & Loop Pad 

Item # Dia. Arbor Pile Type 

49-36-0600 7 1/2” 5/8” 1 1/2” Wool 

*Pad must be used with the Backing Plate 

Backing Plate 

Item # Dia. Arbor Pile Type 

49-36-2150 6 1/4” 5/8” Urethane 

Sanding Discs - Resin Bonded 

Aluminum Oxide: Non-Ferrous Metal, Wood, Fiberglass 

Item # Dia. Arbor Grit Type 

AD736 7” 7/8” 36 Alum. Oxide 

AD750 7” 7/8” 50 Alum. Oxide 

AD780 7” 7/8” 80 Alum. Oxide 

48-80-0622 4-1/2” 7/8” 24 Alum. Oxide 

48-80-0626 4-1/2” 7/8” 36 Alum. Oxide 

48-80-0632 4-1/2” 7/8” 50 Alum. Oxide 

Ceramic: Carbon Alloy, Long Lasting 

48-80-0770 4-1/2” 7/8” 24 Ceramic 

48-80-0780 4-1/2” 7/8” 36 Ceramic 

48-80-0790 4-1/2” 7/8” 50 Ceramic 

48-80-0800 4-1/2” 7/8” 60 Ceramic 

48-80-0810 4-1/2” 7/8” 80 Ceramic 

Alumina Zirconia: Ferrous Metal & Grinding 

48-80-0681 4-1/2” 7/8” 24 Zirconia 

48-80-0683 4-1/2” 7/8” 36 Zirconia 

48-80-0685 4-1/2” 7/8” 50 Zirconia 

48-80-0687 4-1/2” 7/8” 60 Zirconia 

48-80-0689 4-1/2” 7/8” 80 Zirconia 

Angle Grinder Arbor Adaptor 

Item # Arbor Reduced Size 

48-003-1005 5/8”-11 to M10-1.25 


DRILL & DRIVER BITS/SAW BLADES 

Milwaukee Shockwave Drill & Driver Bits 

Milwaukee® Shockwave Impact Duty Driver Bits are engineered for 

extreme durability and up to 10x life. Made from proprietary steel and heat 

treated to control hardness, the Shockwave Impact Duty Driver Bits feature an 

innovatively designed geometric shock absorption zone to extend life. The forged 

tip allows for a secure grip and maximum contact eliminating stripping or slipping. 

48-32-2301 30 ° Knuckle, 11pc 

Features a 30° locking position allowing 

maximum access. 1/4” Hex is compatible 

with quick connect chucks. Includes Driver, 

Pivot Adapter & (10) Assorted 3 1/2” Bits. 

48-89-4445 1/4” Hex Shank Drill Set, 10pc 

Selection of 1” lengths of Phillips, Square & Slotted 

Insert Bits. 2” & 3 1/2” lengths of Phillips and Square 

Power Bits. Compact Magnetic Bit Holder 

Square Power Bit 

49-66-4562 1/4” Hex Magnetic Nut Driver Set, 4pc 

Impact retainer type nut drivers, 1 7/8” long. 1/4”, 5/16”, 3/8”, 7/16” 

MARXMAN Maintenance Drill Bits 

81509 Marxbore Jobber Length Drill Set, 29pc 

General purpose set with a Clip-on Hard Case. 

Sizes 1/16” to 1/2” by 64ths. Series 384 High Speed 

Steel with Black & Gold Coating. Made is USA. 

82144 Marxbore Mechanic Length Drill Set, 29pc 

General purpose set with a Metal Index Case. Sizes 1/16” to 1/2” by 64ths.. 

Angle: 135° Split Point. 383 High Speed Steel with Black & Gold Coating. 

Made is USA. 

Band Saw Blades 

Milwaukee Band Saw Blades are designed to maximize performance of 

Milwaukee Band Saws. They will deliver long tooth life and exceptional 

durability in metal-cutting applications, including strut, conduit, angle iron, 

copper tube, threaded rod, and pipe. Tooth form, pitch, and set have been 

designed to deliver straight, accurate cuts across a broad range of materials. 

Milwaukee Standard / Deep Cut Portable Band Saw Blades 

For any portable band saw that takes a 44-7/8” blade. For materials 5/16” - 1/2”. 

Item Description Blade Grit/TPI Qty 

48-39-0551 Deep Cut 44-7/8” 10/14 3 

48-39-0501 Deep Cut 44-7/8” /10 3 

48-39-0561 Deep Cut 44-7/8” 14/18 3 

48-39-0511 Deep Cut 44-7/8” /14 3 

48-39-0521 Deep Cut 44-7/8” /18 3 

48-39-0531 Deep Cut 44-7/8” /24 3 

Find Corded and Cordless Bandsaws 

on Pages 63 & 66 

See the price list for individual Milwaukee® 

Shockwave Impact Duty Accessories 

48-32-4401 1/4” Impact Driver Set, 29pc 

For use with Impact Drivers. Features compression forged tips. 

Includes a Magnetic Bit Holder and Bulk Storage Container; 1” 

& 2” long Phillips Bits, 1” & 2” long Square Bits, 1” long Torx 

Bits and (3) Magnetic Nut Drivers. 

48-32-4402 1/4” Drill & Drive Set, 35pc 

Bits feature a 135° split point to allow start 

on contact eliminating walking. Selection 

includes 1” and 2” lengths. 

48-32-4403 1/4” Impact Driver Set, 18pc 

Selection includes 1” & 2” lengths of Insert, 

Power, Square Bits; Magnetic Bit Holder. 

Milwaukee Thunderbolt® Drill Bits 

Milwaukee® Thunderbolt® Black Oxide Jobber length drill bits are 

designed for extreme durability and long life. The Thunderbolt® 

web features a thicker core than a standard drill bit, which provides 

ultimate strength and protects against side-load breakage. A specially 

designed parabolic flute form clears chips and debris fast to keep the 

bit cool. A precision start, 135 Split Point tip starts on contact to keep 

the bit from walking for fast accurate holes. Excellent for drilling on 

curved surfaces, requires less effort to drill and is highly recommended 

for use with portable drills. The 3-Flat Secure-Grip shank won’t slip 

in the drill chuck. Reduced shank diameter for use in 3/8” chucks. 

48-89-2803 Black Oxide 3 1/2” Jobber Length Drill Set, 15pc 

Includes (15) of the most commonly used drill bits. 1/16” - 3/8” 

Milwaukee Standard Driver Bits 

48-32-1700 Insert Bit Set, 20pc 

Includes (19) of the most commonly used S2 

screw driver bits (Phillips, Square Drive, 

Torx® and Slotted), Magnetic Drive Guide and 

a unique Magnetic Storage Case. 


Torx 

Square Recess 

Phillips 

Magnetic Bit Holder 

See the price list for individual 

Milwaukee® Thunderbolt ® Accessories 

Milwaukee Compact Portable Band Saw Blades 

For cutting common materials 5/32” - 3/16” thick 

and very hard materials 3/16” - 5/16” thick. 

Item Description Blade Grit/TPI Qty 

48-39-0519 Compact 35-3/8” 14 3 

48-39-0529 Compact 35-3/8” 18 3 

48-39-0509 Compact 35-3/8” 10 3 

48-39-0539 Compact 35-3/8” 18 3

SAW BLADES, ABRASIVES 

Milwaukee ® Sawzall Blades 

General Purpose blades maximize general purpose cutting. 

Wood Cutting blades with NAIL GUARD and a FANG TIP offer fastest cuts, 

longest life, greatest tooth durability and quickest plunge cuts. 

Standard Metal Cutting blades maximize metal cutting performance. 

Fleam Ground blades deliver clean cuts in clean wood, plywood and OSB. 

Wrecker blades are ideal for general demolition cutting. Delivers durability in 

ferrous & non-ferrous metals, plastics and nail-embedded wood. 

Torch Diamond Grit blades are ideal for cutting cast iron, hard tile, masonry etc. 

30x longer life than standard carbide blades - lower cost per cut. 

The Torch delivers durability & straighter cuts in pipe, conduit, strut & metals. 

Carbide Grit blades are designed for cutting ceramic tile, plaster, 

masonry, brick, fiberglass and other abrasive materials. 

Pruning blades deliver fast, clean cuts in limbs, branches and green wood. 

Ax blades with NAIL GUARD and a FANG TIP deliver the fastest cuts, longest life, 

greatest tooth durability and quickest plunge cuts of any wood blade on the market. 

Sets include a Storage Container 

49-22-1145 Sawzall General Purpose Set, 9pc 

Includes (3)” for Wood with FANG TIP, (6) Std. Metal 

49-22-0240 Super Sawzall Blade Set 8pc 

Includes (4) Wood with FANG TIP, (4) Ice Hardened 

49-22-1129 Sawzall Blade Assortment Set, 12pc 

Includes (6) Torch, (4) Ax, (2) Wrecker 

General Purpose Blades - 5 Pack 

48-00-5091 Super Sawzall Blade 8/12T 6” 



48-00-5092 Super Sawzall Blade 10T 6” 


Wood Fang - 5 Pack 




Sanding Belts 

Item # Size Grit 

Aluminum Oxide 

A14260 1x42" 60 

A142240 1x42" 240 

A142400 1x42" 400 

A142600 1x42" 600 

A23636 2x36" 36 

A23680 2x36" 80 

A236400 2x36" 400 

A248360 2x48" 36 

A24880 2x48" 80 

A248120 2x48" 120 

A248240 2x48" 240 

A248400 2x48" 400 

A248600J 2x48" 600 J Flex 

A27236 2x72" 36 

A27260 2x72" 60 

A27280 2x72” 80 

A272120 2x72" 120 

A272120J 2x72” 120 J Flex 

A272240 2x72" 220 

*More Belts Available by Special Order 

Item # Size Grit 

Aluminum Oxide (continued) 

A272240J 2x72” 240 J Flex 

A272320J 2x72” 320 J Flex 

A272400J 2x72” 400 J Flex 

A272600J 2x72" 600 J Flex 

A43660 4”x36” 60 

A43680 4”x36” 80 

436100 4”x36” 100 

Cubic Zirconia 

CZ14280 1x42” 80 

CZ24880 2x48” 80 

CZ27120 2x72” 120 

CZ27250 2x72" 50 

CZ27260 2x72" 60 

CZ27280 2x72" 80 

Silicone Carbide 

SC236400 2x36” 400 

SC272220 2x72" 220 

SC272400 2x72" 400 

Ceramic 

C27260 2x72” 60 

C27280 2x72” 80 

C272120 2x72” 120 

• J in the item code refers to Japan Flex - a very flexible belt for knifemakers. 

• Ceramic belts are designed to provide superior cutting action and durability 

sanding carbon steel, stainless steel, and other ferrous and nonferrous alloys. 

Great for grinding and general stock removal. A flexible belt for knifemakers. 

• Cubic Zirconia belts last longer than Aluminum Oxide belts. 

• Silicon Carbide are designed for abusive applications on non-ferrous metals, 

marble, plastic, glass, rubber and fiberglass. 

General Purpose 

Wood with Nail Guard, Fang Tip Pruning -Tree Limbs, Green Wood 

Standard Metal Cutting 

Fleam Wood Cutting 

Wrecker - Demolition Cutting 

Torch Diamond Grit - Cast Iron, Masonry 

Standard Metal Cutting Blades - 5 Pack 






Fleam Wood Cutting - 5 Pack 



Find Corded & Cordless Sawzall ® 

Tools on Pages 63 & 66 

Carbide Grit - Ceramic, Masonry 

Torch - Pipe, Conduit, Strut 

Ax - Wood Cutting with Nail Guard, Fang Tip 

Ice Hard - Hard Metal 

Specialty & Industrial - 5 Pack; * 3 Pack; ** 1 Pack 

48-00-5701 Super Sawzall Blade 8T 6” Wrecker 



48-00-1440 Sawzall Blade 6 Torch Diamond Grit** 

48-00-1450 Sawzall Blade 9 Torch Diamond Grit** 

48-00-1420 Sawzall Blade 6” Tungsten Carbide* 

48-00-1430 Sawzall Blade 9” Tungsten Carbide* 

48-00-1303 Sawzall Blade Pruning 5T 12” 

48-00-5713 Super Sawzall Blade 10T 9” Torch 




48-00-5021 Super Sawzall Blade 5T 6” Ax 



Grinding Wheels 

Item # Dia Thick. Arbor Grit 

GW36 8” 1” 3/4” 36 

Deburring Wheels 

EXL Fine, Silicon Carbide 

Item # Dia Thick. Arbor Grit 

HBW9SF6751 6” 1” 3/4” 9S 

HBW9SF611 6” 1” 1” 9S 

Use to clean, blend, deburr, or polish all metal alloys, 

plastics, composites and glass. Incredible results when 

polishing nippers, tools, knives, etc! 

FA5 3M Telescoping Flange Adaptor #5 

Plastic adaptor to fit 1/2’, 5/8’, 3/4”, or 7/8” shafts. 

Rouges 

Item # 

GST Grease Stick 

Use to lubricate polishing wheels and abrasive grit 

brushes. Prevents load or glazing of wheel or brush. 

GCR Rouge, Green Chrome Polishing 

Use to polish stainless steel, cold rolled steel and others. 

RFR Rouge, Red Coloring Compound 

Jewelers rouge for silver, gold and exotic precious metals. 

SSC Rouge, Stainless Steel Compound 

Used to polish stainless steel. 

TRI Rouge, Tripoli 

For use on heavy cuts on non-ferrous metals especially 

on brass and aluminum pewter. 

WCC Rouge, White Coloring Compound 

Use for a brilliant high gloss on aluminum. Takes out 

scratches and won’t discolor. 


GRINDERS, BUFFERS, BENDERS 

Jet Grinder 


577101 Jet Industrial Bench Grinder #JBG-6A, 6” 37 lb 

3,450 RPM; 1/2 HP, 115V, 1Ph. Dimensions (LWH): 17 x 10 x 9” 

6 x 3/4” Wheel with a 1/2” Shaft. Includes 36 & 60 grit grinding wheels. 

Used for cleaning, sharpening, buffing, removing rust, & removing burs 

from metal. Features heavy duty construction with a powerful, long-life 

motor for use all day, every day. Comes standard with fine and coarse 

vitrified grinding wheels, cast iron wheel guards and dust vents. Totally 

enclosed pre-lubricated ball bearings. UL listed. 

• Heavy Guarded Toggle Switch 

• Rubber Foot Mounts 

• Quick Adjusting Spark Guards 

577172 Jet Pedestal Stand, #JPS-2A 52 lb 

Compatible for all JET Bench Grinders. Heavy cast iron construction 

provides strength and durability. Wide stance base provides a stable 

workstation. The coolant tank and tool tray are conveniently located on an 

adjustable platform. Height: 31”; Mounting Surface: 11 x 10” 

Baldor Buffer 


114 Baldor Industrial Buffer, 20C 4P 24 lb 

For use with soft cloth buffing wheels and buffing compounds. 

Includes flanges and nuts. 

1,800 RPM, 1/4 HP, 60 Hz, 1 Ph. 115V 

Wheel: 1/2 to 3/4” thick, 6” diameter. 

U.L. Listed not C.S.A. Certified. 

Power cord not included, wiring is 

required. 

FOB Manufacturer-Special Order 

Jet Pipe Bender 


331900 Jet 2” Hydraulic Pipe Bender, #JHPB-20 115 lb 

Simple manual operation! Six bending dies 

included: (1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”) 

Rotating stand locks in three positions for stability 

and versatility. The Heavy-duty hydraulic cylinder is 

capable of bending schedule 40 pipe. The radius 

produced with a 90 degree bend on different size 

pipes are listed below. 

1/2” 75mm 

3/4” 94.5mm 

1” 118mm 

1-1/4” 149mm 

2 

Year 

Warranty 

Pipe Size Inside Radius Pipe Size Inside Radius 

1-1/2” 169mm 

2” 212mm 

2-1/2” 262.25mm 

3” 313.75mm 

• Large Quick Adjusting Eye Shields 

• Adjustable Tool Rests 

Pedestal 

Stand 

Max. Pipe Wall: 0.20”; Max Load: 9”; Piston Stroke: 10-1/4”, Ram: 1-3/4” 

Don’t see what a product you wanted? 

We can order any Jet or Baldor products for you! 

Please inquire. 

Find Grinding Wheels and Sanding Belts on Page 70 

Baldor Belt 

Sander 

Belt Sanders 


2048-151D Baldor Abrasive Belt Sander, 2 x 48” 88 lb 

3,600 RPM; 1 1/2 HP, 115/230V 60 HZ, 1 Ph. Supplied with start/stop 

Switch. Power cord not included - wiring is required. U.L. Listed but 

not C.S.A. Certified. FOB Manufacturer-Special Order. 

577004 Jet Bench Belt & Disc Sander, 2 x 42” (8”) 60 lb 

3,450 RPM; 3,100 SFPM; 3/4 HP; 115V, 1 Ph; (20.5x23x20”) 

Allows for sanding, grinding or finishing of outside curves or odd shaped 

work pieces on the belt. Abrasive belt unit does the work of a jig saw, 

coping saw, or hand file while removing material and finishing. 

• 45° Locking Disc/Miter Table Tilt 

• Miter Table is slotted to accept 

Deluxe Miter Gauge 

• Hinged Idler Wheel Cover 

• Removable Platten, Dust Chute 

FOB Manufacturer-Special Order 

“Built for knifemakers by 

a 15 year knifemaker veteran.” 

Jet Bench Belt 

& Disc Sander 

• Chamfer or Bevel 

• Grind, Finish on Disc or Belt 

• Fast, Cool Cutting 

• Cast Construction, Steel Base 

• Cast Iron Tilting Table 

Bench Grinder Attachment 

Multitool 

Item # Ship 

Wt. 

MT362 Multitool 2 x 36” Bench Grinder Attachment 16 lb 

MTBL Miter Table Attachment 

Multitool 362 Attachment fits on most 6-8" grinders with minimum 1/3 HP. 

This is a must-have tool for any fabricator! Removes material up to 5X 

faster than with the equivalent grit grinding wheel. Includes (1) 100 grit 

3M belt & (1) 80 grit 3M disk. OSHA & UL compliant guards. 

2 x 36" Belt, 7” Disk; Miter Table Size: 4 1/4 x 10", 3,450 RPM. 


2 

Year 

Warranty 

TW-90 Knifemakers Vertical/Horizontal Sander, 2 x 72” 

2 HP Variable Speed, 110/220V 1 Ph. (1-1/2 HP, 110V 1 Ph). 

Combination grinder that can be easily switched between the 

vertical and horizontal position. Includes a variety of tool rests & 

grinding tables that adjust for multi-angle grinding or flat grinds. 

1/4” powder coated welded steel plate frame. A very QUIET Grinder! 

• 90° Vertical to Horizontal Tilt 

• Vertical and Horizontal Tool Rest 

• KB Electronics Controller 

• 8" Polyurethane Contact Wheel 

• 2 x 10" Flat Platten 

• CNC Machined Alum. Wheels 

• Dual Bearings Wheels 

• Multiple Configuration Billet 

Quick Change Tool Rest 

• Dual Fork Quick Change Small 

Wheel Receiver (1/2" - 2") 

Accepts Bader Small Wheels 

Made in USA. 

Miter Table Attachment

DRILL PRESSES, BRAKES, SAWS 

Jet Drill Presses 


354401 Jet 15” Bench Model Drill Press 115V, #J-2530 157 lb 

354400 Jet 15” Floor Model Drill Press 115V, #J-2500 167 lb 

115V, 1 Ph 3/4 HP. The J-2530 and the J-2500 Drill Presses boast a 

45” tilting table and a cast iron head with large quill - allowing greater 

accuracy. Features a permanently lubricated heavy duty ball bearing (4) 

spindle assembly in an enclosed quill for longer life & accuracy. 

The large ground steel column gives maximum head and table support. 

Specifications: J-2530 J-2500 

Number of Spindle speeds 16 16 

Spindle Taper MT-2 MT-2 

Quill Diameter 1-7/8” 1-7/8” 

Column Diameter 2-7/8” 2-7/8” 

Drilling Capacity Cast Iron 5/8” 5/8” 

Drilling Capacity Mild Steel 1/2” 1/2” 

Quill & Spindle Travel 3-1/8” 3-1/8” 

Chuck/Arbor Size 5/8” 5/8” 

Drills to Center of Circle 15” 15” 

Swing 15” 15” 

Distance Column to Spindle 7-1/2” 7 1/2” 

Spindle Distance to Base 24” 48 3/4” 

Max Distance - Spindle to Table 15-1/2” 24” 

Distance Base to Spindle 24” 48 3/4” 

Table Size 11-1/2 x 11-1/2” 11-1/2 x 11-1/2” 

Base Work Table 8 x 8” 7 x 7 1/2” 

Base Dimensions 18 x 10-1/2” 11 x 19-1/2” 

Overall Dimensions 31 x 13 x 39 1/2” 31 x 13 x 63” 

Gross Weight 163 lb 167 lb 

ADDED FEATURES 

Hinged metal belt and pulley cover; Accurate depth stop displays 

inch/mm and has a quick set bolt for fast accurate adjustments. 

J-2500 Floor 

Model Drill Press 

Special 

Order 

2 

Year 

Warranty 

Jet Saws 


414220 Jet Manual Bench Model Cold Saw 115V, #J-F225 84 lb 

579002 Replacement Blade for Jet J-F225 Cold Saw 1 lb 

The J-F225 Manual Bench Cold Saw includes a 225mm blade for sawing solid steel. With a 1HP motor, 

manual vise, bronze worm gear, and hardened bronze ground worm screw gear box, this bench cold 

saw is everything but small. Manually cuts from 0-45 degrees from the left. Features an oil bath and a 

control handle with a safety spring loaded trigger switch to start or stop the machine. 

Saw has a coolant system, manual vise and an adjustable depth stop. 

414459 Jet Horizontal & Vertical Bandsaw 115/230V, #HVBS-7MW 286 lb 

The JET HVBS-7MW Metalworking Bandsaw is UL listed and powered by a 3/4 HP motor. Four large 

diameter wheels and built in handle allow easy movement. Unit comes equipped with a 3/4” carbon 

steel blade, chip brush adjustable material stop and vertical worktable. Unit shuts off automatically after 

each cut. Features a heavy cast iron bow & bed, a hardened ground worm gear box and a hydraulic 

downfeed for ease of cut. Unit is on a convenient roller cabinet with a built-in chip tray. 

Specifications: HVBS-7MW 

Motor 3/4 HP, 115/230V, 1 Ph Pre-wired 115V 

Round at 90 Degrees 7” 

Round at 45 Degrees 4-1/2” 

Rectangle at 90 Degrees 2 x 12” / 7” x 10-7/8" 

Blade Size 3/4 x .035 x 93“ 

Blade Speeds (SFPM) 86, 132, 178, 260 

Bed Height 23” 

Vertical Work Table Size 9-3/8 x 10” 

Vise Swivels 45 degrees 

Blade Length 93” 

Rectangle at 45 Degrees 7 x 3-1/2" / 5-1/2 x 4-1/2" 

Throat Depth 7” 

Blade Wheel Diameter 11-3/4” 

Overall Dimensions 20-1/2 x 49-1/2" x 38" 

Gross Weight 330 lb 

Jet Bench Hand Brake 


756216 Jet 48” Bench Hand Brake, 16 GA 439 lb 

Model #HB-1648H 

Suitable for many types of metalforming operations. 

All body sections are welded steel plate. Heavy truss 

rods and braces are designed to give superior strength. 

Precise bed and beam alignment assures working 

accuracy. Features a removable apron nose extension. 

Specifications: 

Height 31” 

Width 23” 

Length 63” 

Mild Steel Capacity (Gauge) 16 

Maximum Lift of Beam 1-1/4” 

Bending Length Capacity 48” 

Beam Adjustment (Front to Rear) 5/8” 

2 

Year 

Warranty 

Special Order 

2 

Year 

Warranty 

Specifications: J-F225 

Round at 90 Degrees 2-1/2” 

Round at 45 Degrees 2” 

Rectangle at 90 Degrees 2-1/2 x 2-15/16” 

Square at 90 Degrees 2-1/4 x 2-1/4” 

Blade Size 225mm x 32mm x 2mm 

Blade Speeds (RPM) 52 

Maximum Vise Opening 2-3/4” 

Motor 1 HP, 1 Ph, 115V 

Square at 45 Degrees 2” 


Overall Dimensions 24 x 18 x 27” 

Saws are Special Order 


Beverly Shears (Throatless) 

Beverly Shears come in three models. They are ideal because they 

can handle cutting light to heavy gauge metals without distortion. 

The unique shoulder design allows work to be turned in any position 

during the cut. The geared rack and pinion makes heavy metal 

cutting simple! Upper and lower blades allow a clean knurl-free cut, 

regardless of the material being cut. The throatless design allows 

for unlimited cut lengths. All models are equipped with high carbon, 

high chrome blades. Bolt the shear to your bench of fabricate a base 

frame. Made in U.S.A. Beverly Shears will last a lifetime and parts 

are always readily available! FOB Illinois 

Model B1 and Parts *SPECIAL ORDER ITEM 


Width: 7” Lower Blade Length: 4-1/4 

Height: 14” Length of Cut: 3” 

Handle: 18” Capacity: 14 gauge Mild Steel 

Depth: 9” Capacity: 18 gauge Stainless Steel 

Item # WT 

442-B1 Beverly Shear, B-1 18 lb 

442-B1RB Replacement Blade Set, B-1 Shear 2 lb 



Width: 9” Lower Blade Length: 4-3/8 

Height: 15” Length of Cut: 3-1/8” 

Handle: 24” Capacity: 10 gauge Mild Steel 


Item # WT 





Width: 9” Lower Blade Length: 5-5/8” 

Height: 15” Length of Cut: 4-1/4” 

Handle: 30” Capacity: 3/16” Mild Steel 


Item # WT 



Jet Slitting Shear 

Item # WT 

755108K Jet Portable Slitting Shear, SS8T 55 lb 

Capable of shearing sheet steel, steel bars and rods plus many 

non-metallic materials. Replaceable high quality stainless steel 

blades are hardened and tempered for maximum service life. 

An adjustable hold down clamp aids in securing material. 

Compound leverage allows the operator to easily perform work 

within shears’ rated capacity. Includes 35-1/2” handle. 

Overall Dimensions 17 x 7 x 17” 


Mild Steel Sheet Capacity 3/16” 

Mild Steel Flat Capacity 2-3/4 - 1/4” 

Mild Steel Round Capacity 1/2” 

Cutting Blade Length 8” 

2 Year 

Warranty 

Jet Foot Shear, Model FS-1652H 

SHEARS - MANUAL 

Beverly Shear 

Beverly Slitting Shear 

Beverly Slitting Shears 

The Beverly Slitting Shear Series are made in 2 sizes to handle 

10 gauge and 3/16” mild steel. It incorporates the most advanced 

design features to provide maximum cutting capacity with 

minimum size and weight. Compound linkage provides easy 

cutting action in the heaviest metals. Rigid, strongly braced 

frame holds upper and lower blades in perfect alignment to 

assure clean cutting action. Designed for straight cutting only. 

It is equipped with high carbon, high chrome blades. Made in 

U.S.A. Will last a lifetime and parts are always readily available! 

FOB Illinois. 

Model SS3 *SPECIAL ORDER ITEM 


Mild Steel Capacity 3/16” Height 13” 

Mild Steel Trimming Capacity 1/4” Handle 30” 

Bar Capacity 1/4” x 2” Depth 11” 

Stainless Steel 10 gauge Blade Length 4-1/4” 

Length of Cut 2-1/2” 

Item # WT 

442-SS3 Beverly Slitting Shear, SS-3 25 lb 

442-S3RB Replacement Blades for the SS3, Set 3 lb 

442-S2RB Replacement Blades for the SS2, Set 2 lb 

Jet Foot Shear 

Item # WT 

752652 Jet Foot Shear, FS-1652H 1, 014 lb 

The JET Foot Shear is ideal for precision shearing of mild 

steel up to 16 gauge and a 52” capacity. Can also be used on 

aluminum, brass, copper, lead, plastic and zinc. Two-way blade 

configuration provides twice the cutting life. Upper blade is 

two-way; bottom blade is one-way. Features a 2° angle cutting 

edge and 1° face relief. 

2 Year 

*SPECIAL ORDER ITEM 

Warranty 

Overall Dimensions 62-1/2 x 78-1/4 x 41-1/2” 

Height 48” 

Width 42” 

Length 67” 

Gross Weight 1,089 lb 

Shearing Length Capacity 52” 

Front Gauge Capacity 28” 

Mild Steel Capacity 16 gauge 

Back Gauge Capacity 30” 

This item ships via freight. 


POWER HAMMER 

SAHINLER AIR HAMMER 

With over 50 years of machinery experience, 

You buy with confidence! 

• Quality, European Standards • US Customer Service 

• US Made Dies (S7) 

• Self Contained Design 

• US Motor (GE or Baldor) 

• Low Maintenance 

• Siemens Electromagnetic Starter • Impeccable Performance 

Warranty - 1 Year Parts & Electrical Components 

THE HEART OF ANY MACHINE IS IN ITS ELECTRICAL SYSTEM 

The Sahinler Hammer has a high efficiency American Electrical System: 

Single phase motor by Baldor or Three phase by General Electric. 

SPECIFICATIONS SM50 

Ram Weight 100 lbs 

Motor 1 or 3 phase 

Horse Power 10 hp 

Distance Between dies 9” 

Piston Center to throat 12” 

Blows per minute 240 (max) 

Die Size (standard) Same 

Weight (net) 2800 lbs. 

The Sahinler Air Hammer 

comes with 2 sets of dies: 

Standard Flat #SFD and 

Standard Double Combination 

#SDC. 

(valued over $850!) 

See page 70 for complete die selection. 

AIR HAMMER & ACCESSORIES 

Receive a $50 STORE CREDIT and 

2 pair of Billy Tongs FREE, 

when you buy a Sahinler 

Air Hammer from Pieh Tool. 

Call for your coupon code today! 

Hammer Base 

The SM-50 needs a base of at least 9” height to sit on. This allows for foot throttle travel and 

raises the lower die to the proper working height. The best arrangement is a steel base as 

shown, although wood timbers will work as well. Concrete is not recommended for this part. The 

floor upon which the hammer and base sit can either be dirt, 6” reinforced concrete or, the best, 

a separate pad, 36” x 72” x 24” deep, which is isolated from the existing slab and poured flush 

with the floor. If you want to build the base yourself, we can provide the plans free of charge. 

Item # 

SM50-1 Sahinler SM50 Power Hammer, 1 Phase 

SM50-3 Sahinler SM50 Power Hammer, 3 Phase 

SM50SB Sahinler SM-50 Welded Steel Base 

Replacement Parts for SM-34 and SM-50 

WK-SM34 Wedge keys for SM34 dies 

WK-SM5060 Wedge keys for SM50 dies 

BLT-SM34 Set of belts for Sahinler SM34 Power Hammer 

Set of Hammer Belts 

BLT-SM5060 Set of belts for the Sahinler SM50 Power Hammer 

Welded Steel Base 

The SM34 and SM60 are discontinued, but we can special order the accessories. Please email or call. 

SOME FACTS 

Self Contained Air Supply 

What exactly does self contained mean? Instead of having a noisy, expensive, high pressure, high maintenance reciprocating air compressor to provide 

the air-motive force, Sahinler Air Hammers use a low pressure, high volume system completely contained and integral to the machine. The motor drives 

a large flywheel via notched v-belts. The flywheel is connected via a pitman bearing and connecting rod to the rear piston. Basically, as the rear piston 

is pushed up, the front piston can come down. It’s depth of stroke is determined by the position of the main valve, which is operated by the foot control. 

The result is excellent control, always enough air, less noise, greater reliability and a more productive and satisfying hammering experience. 

Unmatched Versatility 

The nature of air hammers provides versatility unmatched by any other type of hammer. A wide range of stock sizes can be worked interchangeably. 

There are no springs or arms to adjust when going from wide to flat. Square bar up to 2”x2” is readily worked and larger sizes are possible. They 

are also capable of light planishing blows or tapering .25” rounds. The self adjusting ram makes working different sizes and thicknesses of material 

a breeze. This hammer has been worked 1/2x6” edgewise (yes, even at 6 inches the ram still has enough power to move the metal!), then flopped 90 

degrees to the 1/2” thickness and, by opening the throttle slightly via the treadle, hammered the thin way. Then back again to the fat way instantly. This 

feature not only facilitates radical size variations but is fantastic when using tools between the dies. Hand set tools, spring tools, die tools-the 

possibilities are truly endless. 

What is the hammer made of? 

The cylinders and anvil are spherical gray iron. The frame is welded A36 steel, 13mm on the SM50/60 and10mm on the SM34. The pistons are 1050 steel. 

What kind of bearings are in the machine? 

The pitman, knuckle, and main bearings are all high quality SKF roller bearings. 

Where is this hammer made? 

In Turkey by the Sahin family for over 50 years. They have a thoroughly modern factory producing plate rolls, press brakes, ring rolls, hammers & machinery. 


Free Form Forging Dies 

Item # 

LDC Large Double Combination (pair) * 

An excellent die for general purpose forging operations, including 

drawing out/tapering of square, rectangular and round stock. The 

radius section moves the material quickly and the flat side is useful 

for blocking in parallel sides, using set tools and flattening. 

LTC Large Triple Combination (pair) * 

Has all of the qualities of the double combo, plus the added 1.5” fuller 

for necking down on leaves or balls, fullering on curves and texturing. 

Great for vines and organic work. 2.375 x 6.5”:r1=4.00” r2=.375” 

LDF Large Drawing-Fuller Combination (pair) * 

Divided into equal halves of 3.25” these dies are a tour de force of 

radius die forging. The larger radius is ideal for long tapers or rounding 

out stock. The small radius fuller provides for superior control in 

transitions and texturing. 2.375 x 6.5”:r1=4:00” r2=.50” 

LDD Large Drawing Dies (pair) * 

Use on flat, round or square stock. These dies are especially useful 

for freehand forging of pipe and tubing. Can also be used for fullering 

and spreading. 2.375”x6.5”; r=4.00” 

SFD Standard Flat Dies (pair) 

Very versatile dies are fully hardened throughout, making them 

adaptable by grinding without loss of hardness. Radius the edges, 

grind in a texture, modify the profile. 2.375 x 4.75” 

SDC Standard Double Combination (pair) 

For making the most out of your forging time combination dies can’t 

be beat. The radius side draws material out quickly and the flat side 

keeps it in line. Also use the radius for spreading and the flat for tool 

work. 2.375 x 4.75”; r=4.00 

SDF Standard Drawing - Fuller Combination (pair) 

Divided into equal halves of 2.375”. Extremely handy for tapering 

and spreading. The larger radius is ideal for long tapers or rounding 

out stock. The small radius fuller provides for superior control in 

transitions, as well as texturing. 2.375 x 4.75”:r1=4:00” r2=.50” 

SFFC Standard Fuller-Flat Combination (pair) 

Sharp fuller is made for necking down at transitions, texturing and 

general fullering operations. By fullering the outside half of a flat bar 

a beautiful radius can be quickly turned. 2.375 x 4.75”: r=.375” 

LFD Large Flat Dies (pair) * 

Essential for the bladesmith pattern welding large billets. These can 

become what you make them. With radiused edges they become 

West Coast drawing dies. Make your own combinations! 2.375 x 6.5” 

WFD Wide Flat Die (pair) * 

More than 16 square inches of surface area, it makes an excellent 

choice for pattern welding billets, set tool work and texturing. Fully 

hardened and tempered to allow easy modifications. 3.25” x 5.00” 

TWF Two Way Fuller Die (pair) 

Fantastic dies for working sheet, plate or flat bar. With the slight side to 

side radius the fuller doesn’t dig into the work on the ends. Sculptors 

will find these dies indispensable. 1.25” x 4.75” r1=1.00”, r2=8.00” 

SSD Special Sculpture Dies (pair) 

Essentially these are giant ball peens, with convex surfaces. They 

can be used as a pair, offset, or with a flat bottom die to produce 

different effects in moving the metal. 2.375 x 2.375” 

STMD Special Toolmakers Dies (pair) 

For drawing out the edge of a sword blade, spokeshave or knife. The 

top die acts as a fuller to spread the edge, while the flat bottom die 

provides stable platform. 2.375 x 4.75” top: r1=4.00” bot.: flat w/ radii. 

POWER HAMMERS DIES 

OUR POWER HAMMER DIES ARE MADE IN THE USA! 

All of our dies are machined and heat treated in the USA, giving them the edge in Quality, Price and Availability! 

General Specifications for Hammerhead Dies 

Material: S-7 Deluxe Air Hardening Shock Steel 

Machining Tolerances: +/- .005” 

Heat Treat Method: Digitally Controlled Electric 

Furnace, Moving Air Quench. 

Finished Hardness: 52-54 Rockwell-C 

Die Compatibility 

Sahinler, Kuhn, Glaser (Sahinler) 

Large Dovetail Dies Dimensions: 2-1/8” x 1-1/4” 

Sahinler SM-50/60, Glaser 50/60, Sayha SSM50, Kuhn K/CF-50/65 

Small Dovetail Dies Dimensions: 1-5/8” x 1-1/8”. T 

Sahinler SM-34/40, Glaser 34/40, Kuhn K/CF-22/40 

* Comes in Large Dovetail Only 

Swage Dies 

Item # 

WTF Wedge Taper Flat Combination (pair) 

20° included angle. Any angle may be specified on this combination 

die set. Use the angle side to forge the point, then block it with the 

flat side. Highly efficient for multiple short tapers of a specific angle. 

Not for general tapering. 3.25” x 5.00” 

WWTC Wide Wedge Taper Dies (pair) * 

20° included angle. For two sided tapers or four sided pyramid 

points this die set produces outstanding, repeatable results in mere 

seconds every time. Any angle may be specified to suit your custom 

requirements. Not for general tapering. 3.25” x 5.00” 

BSD Ball Spindle Dies (pair) 

Be creative with your balustrade spindles while making the perfect 

sphere every time. Produces a beautiful faceted 1” ball with .5” round 

entries on 1.25” round. Other sizes are available. 3.25 x 5.00” 

SID Stake Insert Die (one die, one blank stake) 

This die can be used either as a top or bottom die. Rhe .75” hole 

accepts fullering, veining or mushroom stakes up to 3” long. Blank 

stakes are available for customizing. Imagine the possibilities for 

moving metal with this set! Has bolt to secure tool. 2.375 x 4.75” 

SIDBS Stake Insert Die Blank Stake (one stake) 

Blank Stake for use with Stake Insert Die (SID). 

BEF Ball End Finial Die (pair) 

Produces a perfect faceted 1” ball finial on the end of a 1” round bar. 

A turning post makes using this die set a snap. Other sizes are 

available - please inquire. 2.375 x 4.75” 

Texture Dies 

Item # 

PD Peening Texture Die (one die) 

For texturing flat bar with a traditional peened texture. The raised 

convex areas vary between .375” and .75” in root diameter. These 

dies may be used singly with a flat top die or as a pair for two sided 

texturing. For hot material. 2.375 x 4.375” 

BTD Bark Texture Die (pair) 

The hand carved pattern in these top quality dies will produce a bark 

texture in round or flat material. The pattern is graduated in size from 

side to side for versatility. 3.25 x 5.00” 

CF Cross Fuller Texture Die (one die) 

Raised ridges are spaced to produce a lovely subtle texture in flat or 

square material. This texture was used extensively in French Deco of 

the 1920’s. 2.375 x 4.75” 

Tool Holding Dies 

Item # 

USD Upper Saddle Die (one die) * 

With a selection of shop-made saddles attached to the die via a .5” 

through bolt the smith can create a huge range of shapes in short 

order. Combine this with the Hardy Hole Holder on the lower die and 

you’re ready to tackle all of those tricky shapes. 2.375 x 6.5” 

HHH Hardy Hole Holder (one die) 

The Hardy Hole Holder is the most useful gadget at my forge. It slips 

around the lower die, resting on the sow block. The 1” square hole 

accepts a tenoned .75 x 4” x 8” A36 plate, which rests on the die. 

Myriad shop-made accessories can then be welded to this plate. 

Can you use oversized dies? 

Sahinler’s ram (front piston) does not travel 

upwards past the edge of the dovetail way.; 

dies may overhang the circle of the piston. 

Can you change the orientation of the dies? 

Yes. The front piston can be rotated every 20º. 

How long does it take to change the dies? 

It takes about 15-30 seconds to swap dies. 

We can modify any of these dies to fit other power hammer brands. We also make custom dies. 

Fax or E-mail us your requirements. 928-554-0800 or amy@piehtoolco.com 

75

POWER HAMMER SWAGES, TEXTURING 

Spring Swages 

Pieh Legacy Collection 

Victory Forge 

Item # 

VFGR58 Grape, 5/8" 

VFBA38 Ball, 3/8” 

VFBA12 Ball, 1/2” 

VFBA58 Ball, 5/8" 

VFBA34 Ball, 3/4" 

Acorn Swage 

VFRO38 Rope, 3/8" 

VFRO12 Rope, 1/2" 

VFAC38 Acorn, 3/8" 

VFAC12 Acorn, 1/2” 

VFAC58 Acorn, 5/8” 

VFAC1 Acorn, 1” 

Tenon Swage 

VFTE18 Tenon, 3/16” 



VFTE58 Tenon, 5/8" 

Victory Forge Leaf Tools 

VFVTR Vine Texture Swage 

Gives a nice wood texture. Made for round stock. 

VFLB38 Leaf Blank, 3/8” Swage 

VFLB12 Leaf Blank, 1/2” Swage 

VFLTool Leaf Sinking Tool 

VFBTool Butt Tool 

Use these together: forge your leaf using Leaf Blank 

Swage, center bottom side over the Leaf Sink Tool 

with veining chisel. Heat, turn over, strike Butt Tool 

over raised crease, sinking leaf into a wood stump. 

Grape Swage 

Ball Swage 

Guillotine Fullers 


Victory Forge 

Fits in anvil’s hardy hole. Simple to use! Just give a few blows to 

the top of the fuller while turning your stock and turn out some nice 

fullered pieces. Made in the USA. 

Item # 

VFGF58 Guillotine Fuller, 5/8” 

VFGF34 Guillotine Fuller, 3/4” 

VFGF78 Guillotine Fuller, 7/8" 

VFGF1 Guillotine Fuller, 1” 

VFGCF58 Guillotine Combo Fuller, 5/8” 



VFGCF1 Guillotine Combo Fuller, 1” 

Nail Headers 


Nail making is one of the very oldest forms of forging. Square hand made nails 

have 4 times the holding power as a round wire nail. It is a great way to learn 

better hammer control. To make nails start with a round or square rod usually 

in a size from 3/16 up to say 1/4 inch in either diameter or square. The ideal 

material would be very low carbon steel but we can make good nails from 

either hot or cold rolled mild steel. Domed, 4140 Steel. Made in the USA. 


Item # 

CDNH316 Pieh Nail Header, 3/16” 

CDNH14 Pieh Nail Header, 1/4” 

Scroll Jig 


This handy scroll jig will allow you to make a perfect 

4-1/2” scroll every time. Just clamp it in the vise and 

shape your stock around the scroll. Made of mild steel. 

Victory Forge 

Item # 

VF68 Scrolling Jig, 1/4” x 1” 

Victory Forge Springs Swages are made from mild steel by our 

resident blacksmith instructor, Gordon Williams. Be assured 

each tool is crafted carefully; your satisfaction is guaranteed! 

Ask us about modifying your swage to fit your power hammer! 

Check out our other fine tools in the Pieh Legacy Collection TM . 

As a general rule, our spring swages are designed for use on 

square stock. Square stock produces the best results because 

there is more material to displace. They will work on round as 

well, but will not turn out as nicely-sometimes requiring more 

clean up on the piece produced. If we make a swage for round 

specifically, we will indicate it. 

Rope Swage Leaf Blank Swage Vine Texture Swage 

VF Butt Tool 

(close up view) 

VF Leaf Tool 

Spring swages can be used by hand at the anvil or power 

hammer. They will produce better results if you build a 

saddle, to go over a power hammer die, with a hardy hole 

in it and weld a hardy stob onto the spring swage. This 

hardy stob will also allow the spring swage to be used in 

the hardy hole of your anvil. 

If you would like more instruction on making leaves 

consider taking our 3 day blacksmithing class. 

Guillotine Fuller 

The double fullering allows you to make chile peppers or making 

bamboo on tubing, as well as fullering leaf stems. 

Power Hammer Punch Set 


Item # 

PT-S715S Pieh 15 Piece Punch Set with Rivet Tong 

Set is designed to be used with our 1/2” rivet tong under heavy 

forging equipment such as an air hammer, treadle hammer or other 

trip hammer. Also included, the handsome composite wood tool block 

keeps tools organized. *The Hot Cut Chisel will need to be dressed at 

the belt sander/grinder to individual preference. Made in the USA. 

Made from S7 and includes 1 each of the following: 

• Veining Chisel, Small 

• Veining Chisel, Large 

• 15/64” (6mm) Ball (Bob) Punch 

• 21/64” (8.5mm) Ball (Bob) Punch 





Guillotine Combo Fuller 

• 3/16” Mushroom Punch 

• 5/16” (8mm) Round Tapered Punch 



• 13/64” (10mm) Fuller 

• 5/32” (8mm) Fuller 

• 15/64” (12mm) Fuller 

• 3/4” Billy Rivet Tong: #PT4012 

Punch shown with Tong 


Pein Anvil Die Set 

We use the Mark Treadle 

Hammer in our Blacksmithing 

School and have a demo 

model for you to try! Come 

by or take a class today! 

TREADLE HAMMER & TOOLING 

The Mark In-Line Treadle Hammer 


MMTH 375 lbs. 

Used by Blacksmith’s across the country, THE MARK In-Line Treadle Hammer 

offers the convenience of a foot-operated hammer with the added feature of a 

vertically aligned head assembly with hardy holes in the top and bottom plates 

to facilitate alignment of precision tooling. Have both hands free to work and 

perform operations such as cut-off, embossing, upsetting, punching, edge trimming, 

fullering, stalking, riveting, extruding, and much more! You control the 

hammer blows from a light tap for delicate work to heavy blows for moving large 

amounts of material. 

Treadle Hammer with Power Pack 

MMTH-PP Save by ordering with Hammer! 

“THE MARK” POWER PACK (shown installed at right) is an OPTIONAL air 

operated assembly that easily mounts on “THE MARK” In-Line Treadle Hammer. 

A foot pedal takes the place of the treadle pedal. Simply attach two clamp 

assemblies and mount the control box unit on the hammer back frame, plug into 

a 110-volt and a minimum 40 PSI continuous duty air compressor and you are 

ready to hammer! You may use, at a minimum, a 10 gallon capacity tank. Pancake 

style will work when you are traveling with the hammer. The foot pedal can 

be moved around for your convenience in use and you can still use the treadle 

pedal without disconnecting the power and air supply. 

THE POWER PACK CAN BE ADDED ON AT ANY TIME! 

SPECIFICATIONS: 

Overall: Hammer Floor Head Head 

High Deep Wide Table Height Weight Stroke 

84” 32” 17” 5” x 6” 38” 65 lbs 12-13” 

Treadle Hammer Accessories 

Item # 

MMTH-PP Power Pack 

Power pack for the Treadle Hammer, when purchased at a later date from 

Treadle Hammer purchase. 

Treadle Hammer Tooling 

Dies are made from 4140 alloy steel and have a 1” hardy. 

MM-PAD Pein Anvil Die Set (Top and Bottom) 

1-1/2x2x4” 

MM-DieSet6 Die Set 

Save when you buy entire set! 

Set includes: Small and Large Standard Flat Dies 

Small and Large Radius Dies 

Top and Bottom Pein Anvil Dies 


FLY PRESSES 

Fly Presses 

John Crouchet at his Fly press. 

Be sure to check out our 

Fly Press Tooling and Accessories 

and Fly Press DVD (page 126) 

by John Crouchet. 

Fly Press C Frame Model 

All fly presses have an extra heavy cast frame, with ribbed construction and cast tapered 

central ram and machined guideways and is easily adjustable against wear and tear. The bed 

is provided with heavy duty adjustable steel die holding clamps which will preserve your dies 

and allows easy indexing of your die and tool. The base hole is adjustable with bushings to 

suit different jobs. The large hole is available by easily removing smaller ring in the base. The 

top end of the screw has hexagonal tapered reception for the wheel to ensure no-slipping. 

This allows quick & easy repositioning of fly wheel and handle. Mild steel screw with heavy 

duty square angular thread and threaded die hole. The adjustable clutch allows the fly wheel 

to stay put when you back it up. You don't have to worry about the handle spinning down on 

you while you change tooling. This is done with the interplay of the two nuts on top of the 

ram. It is up to you to make this adjustment, but it can be done in a couple of minutes. 

Applications of Fly Presses: Punching, Cutting, Chiseling, Fullering, Pressing, Slitting, 

Drifting, Bending, Stamping, Deep Drawing, Texturing & Surface Ornamentation, Straightening, 

Open and Closed Die Work, Bending Large Stock in Graceful Arcs, and Cones or Corkscrew 

Like Shapes. Combine these forms to add a new dimension to your work. 

Break into the high end architectural, furniture, lighting or sculpture markets. Great for 

furniture (tables, beds, chairs, etc.) Ornamental Ironwork like: gates, railings, fences and 

much more. 

If you have a repetitive element to make, just weld up the top profile and insert it into the top 

hole in the ram. Place the bottom profile on the press bed. Insert the hot steel in between 

the top and bottom tools and with a motion like closing a refrigerator door, out pops your 

repetitive element. Can't get much easier than that. See the photo at the left. 

Think of the drudgery, time and money you'll save and how much faster you can make 

your various elements. No electricity required. No noise either. The only limitation is your 

imagination and initiative. 

What the fly press really means to the shop owner is PROFIT! 

Less time doing repetitive jobs, more time working on new 

jobs or spending time with friends and family. What this 

also means is now you can take on more jobs and perform 

processes previously impossible using other means or 

without a helper on hand and lot of time getting it right. 

C-Frame Features: 

• Two die clips for the base to hold tooling or dies to the base 

• Large round flywheel 

• No Ball weight style head bangers 

• One handle rod 

• Single sided frame. 


Item# CF0 CF1 CF2 CF3 CF4 CF5 CF6 CF8* 

Base to Guide: 4-1/2” 5” 5-3/4” 6-3/4” 7-1/4” 8” 9” 11” 

Center to back: 3” 3” 3-3/4” 4-1/2” 4-3/4” 5-1/4” 6” 7-1/2” 

Diameter of Screw: 1-7/16” 1-11/16” 1-11/16 1-11/16” 1-7/8” 1-7/8” 2-3/8” 3” 

Hole through Base: 

(without ring) 

1-3/4” 2” 2-1/2” 3” 3-1/2” 4” 4-1/2” 6” 

Hole through Base: 

(with ring) 

-- -- -- 1-1/2” 1-3/4” 2” 2-1/4” 3” 

Stroke: 3” 4” 4-1/2” 4-1/2” 5-1/2” 5-3/4” 6” 8” 

Hole in Ram Diameter: 1” 1” 1” 1” 1” 1” 1” 1-1/2” 

Hole in Ram Depth: 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 2” 2-1/2” 

Diameter of Flywheel: 18” 18” 19-1/4” 21” 23” 23” 29” 32” 

Weight of Flywheel: 44 lb 48.5 lb 62 lb 80 lb 94 lb 100 lb 148 lb 200 lb 

Height of the body: 19-1/4” 19-1/4 21-1/2” 23-3/4” 26-1/4” 28-3/4” 33-1/4” 40” 

Net Weight: 77 lb 171.6 lb 220 lb 308 lb 374 lb 440 lbs 660 lb 1,075 lb 

Ship Weight: 115 lb 215 lb 310 lb 350 lb 560 lb 588 lbs 870 lb 1,150 lb 

*The #8 Fly Press is Special Order and needs 4-6 month lead time. Prepayment is required. 


FLY PRESS ACCESSORIES & TOOLING 

Fly Press Accessories & Tooling 


Pieh Tool Fly Press Stand 

Item # 

PTFPST Fly Press Stand 

Our sturdy stand was designed by John Crouchet (DVD5 How to 

use a Fly Press) is manufactured at Pieh Tool Company from A36 

steel. The legs are angled to give more stability and strength and 

are made from 2” hot rolled steel welded tubing. The 1” welded 

diagonal support bars on three sides provide the added strength 

needed to handle the constant counter clockwise turning force of the 

fly press. The front has a 1” cross section bar providing strength while 

also allowing you to sit close to your press with legs underneath. The 

front opening of the table allows for easy cleaning and room to keep 

your tooling handy. The vertical welded 1-1/2” sections on three 

sides keeps your tools safe from falling onto the floor. Fits our #5 

and #6 presses. We recommend you bolt the stand to your floor. We 

will modify the table top holes to accommodate other size presses on 

request. Stand is left unpainted. Table Height: 31”; Table Size: 24 X 

24 X 3/8”; Footprint: 39 X 36”; Weighs 122 lbs. Ships motor freight 

only. We can customize other sizes! 

Pieh Tool - Crouchet Fly Press 

S7 Tooling & Accessories 

Item # 

PTFPSBT Side Butcher Set 

Great for making shoulders or tenons. Tool steel 

construction with welded back. 1” shanks. Set 

includes top and bottom. 

PTFPF-1 Fuller Set, 1” radius 

PTFPF-3/4 Fuller Set, 3/4” radius 




Fullers make reducing or stretching stock effortless. 

Can be used to make shoulders or other indentations. 

Tool steel construction with welded steel back. Has 

1” shanks. Set includes top and bottom. 

PTCFP-VCL Veining Tool, Large 

PTCFP-VCS Veining Tool, Small 

Use with your fly press to make veining in leaves 

or to mark stock for twists or decoration. Tool steel 

construction with welded steel back. 1” shank. 

PTFPBDF Bending Die & Forcer Set 

Our right angle forcer and base is constructed from 

steel. Make right angle bends easy on hot or cold 

steel. Has a 1” shank. Set includes top and bottom. 

PTCFP-M Mushroom 

Use underneath a leaf to provide a curved working 

surface while using the veining chisel or ball punch. 

The piece can be rocked on the mushroom to 

create curved lines. Can be used at the anvil or fly 

press. Made from low carbon steel and is soft (not 

hardened) & can be hardened with Kasenit. (Item 

#KSNT1-1) We left it soft so that the veining chisels 

or ball punches would not be damaged. 3 1/2” OAH, 

2-3/8” x 2”. Has a 1” shank. 

Fuller Set 

Side Butcher 

Fly Press Stand 

Used fly presses, with high quality screws that aren't 

worn out, are hard to find. Many of the used machines 

don't have a steep enough pitch to the screw. This means 

that you must have multiple revolutions of the fly wheel. 

Our presses are designed, from the ground up, for forging. 

Note, the screw only requires a bump on the handle that 

hangs down from the fly wheel. 

For bigger jobs try a full revolution. You might need a full 

revolution for hot bending a 2x4" piece of bar stock on 

some of the smaller machines. This is a four lead screw 

and the fly wheel on top sits on an octagonal screw 

for positioning the handle to the most comfortable and 

productive position. 

We offer an excellent DVD on how 

to use a Fly Press and how to make 

tooling. See page 126. 

See page 52 for photos of the 1/2” Ball and Character Punches. 

Pieh Tool S7 Ball & Character Punches 

These are a shortened version of the 7” tools. 

1/2” Shanks (Fits 1/2” Tool Extension) 

Item # 

Item # 

Item # 

DE000-FP Duck Eye Punch 

BP500-FP Ball Punch, 1/2” 

BP125-FP Ball Punch, 1/8” 

EE000-FP Eagle Eye Punch 

BP437-FP 

BP375-FP 

BP312-FP 

BP250-FP 

BP188-FP 

Ball Punch, 7/16” 




Ball Punch, 3/16” Ball Punch 

EP250-FP Eye Punch, 1/4” 



ES000-FP Eye Socket Punch 

WE000-FP Wolf Eye Punch 

Ball Tool 

1” & 1 1/4” 

HE000-FP Horse Head Ear Punch 

CP000-FP Center Punch 

1” Shank (Fits 1” Tool Extension) 

BP1125-FP Ball Tool, 1-1/4” 

BP1000-FP Ball Tool, 1” 

Vein Tool 

Bending 

Die/Forcer 

Mushroom 

Accessories 


Item # 

PTCP4/5/6 Clamping Plate, (for #4, 5, 6) 

Tee-nuts and cap screws included (not pictured). 

The bolt holes are countersunk. The clamp plate 

is necessary in order to use your fly press for 

blacksmithing. The Hardie Bolster or Guided Bolster 

is clamped to this plate with vise grips. 3/8 x 10 x 19” 

PTHB1-19 Hardie Bolster, 1” (for #4, 5, 6) 

This plate holds your hardy tools that you already 

have. Designed to hold our Mushroom, Side Butcher 

and Fullers. Attach to our Clamping Plate. Has 1“ 

square hole, 19“ long. 

PTGB38-19 Guided Bolster (for #4, 5, 6) 

Use as a guide so that your working piece stays 

straight. Consists of a plate and guide. 3/8 x 4 x 19” 

PTTE1 Tool Extension, 1” hole 

PTTE58 Tool Extension, 5/8” hole 



All tool extensions have a 1” round shank. Used to 

hold and extend your tools under the fly press ram. 

Allows for quick tool changing. Allen cap screw locks 

your tool in place. 

PTC1x2.5 Collar 

PTC1x2.5D.5 Collar, 1/2” hole drilled 

Used for making your own tooling. A collar is the 

shank ready to be welded to the tool. 

PTSLV Fly Press Sleeves 

Adaptors fit the tooling extensions: 1/2”, 5/8”, 3/4”. 

Collar, 

Drilled 

(shown with 

S7 piece) 


Collar 

Clamping Plate 

Hardy Bolster 

Guided Bolster 

Tooling Extension 

We can make most of our tooling in other shank sizes, including the 

Tool Extensions. Please contact us with your requests.

COAL FORGES, FIREPOTS, BLOWERS 

#1219, #1204, #PTC1203 

Blowers 

More 

Johnson 

Blowers 

Available 

by Special 

Lorance Fire Pot 

Order 

Pieh Tool Coal Forge with Hood 

Coal/Coke Forges 


Item # Weight 

PTCF Pieh Forge Frame 120 lb 

Heavy duty 3/16” fabricated steel hearth. Hearth Size: 24x30x3“. 

PTCF-WP Pieh Coal or Coke Forge 181 lb 

with Firepot and Tuyere 

Same as above but includes Lorance Firepot, Clinker and Tuyere. 

PTCF-WH Pieh Coal or Coke Forge 193 lb 

with Firepot, Tuyere and Hood 

Same as above but also includes a 24” Hood. 

PTCF-WB Pieh Coal/Coke Forge 205 lb 

with Firepot, Blower, Tuyere, Air gate 

The same forge as above but includes our PTC1203 blower and air 

gate. No hood. 

PTCF-WBH Pieh Coal/Coke Forge 230 lb 

w/ Hood, Firepot, Blower, Tuyere, Air gate 

The same forge as above but includes our PTC1203 blower and air gate 

and hood. 

PTHD Pieh 24” Half Hood, Steel 12 lb 

Base Width: 24“, Depth: 14”; Height: 26“, Flue: 8” Diameter; 21 gauge. 

*(Oversized Shipping) 

Firepot 

RLPOT Roger Lorance Coal/Coke Fire Pot 50 lb 

(Clinker unattached; Drilling holes costs extra) 

Cast Iron, 14 x 11-1/2 x 11-3/8 x 8-7/8”, Depth: 3-7/8; Outside Bowl 

Diameter at Hearth: 9-1/2” x 12”. Heavy enough to burn coke. 

Tuyere 


TA Tuyere with Ash Dump 11 lb 

2” Inlet, 4” Outlet 

Our tuyere is made from a 1/4” standard cold rolled steel welded T 

with a welded flange. 

Tuyere and Dump 

Full Blast Gate 

Disclaimer: We are not 

responsible for any damages to 

your health in relation to your 

use of these lining products. 

Wear protective clothing and 

respiratory protection. 

Blast Gates (Air Gates) 

AG2 2” Sheet Metal Frame with Aluminum Gate 

AG3 3” Sheet Metal Frame with Aluminum Gate 

Used to control the air between one or more blowers and forges. Blast 

gates maximize system efficiency. Allow to switch between blowers 

such as a hand crank blower. Has a locking knob. 

Electric Blowers 

Johnson 

Item # Weight 

BA0100013 #1218 Blower with flange mount 8 lb 

BA0100014 #/1219 Blower (1218 blower with shutter) 8 lb 

Housing: Cast Aluminum; RPM: 11,000; WCP: 26 CFM at 4” W.C.; 

Outlet: 1”; Motor: 1/3 hp, 115 Volt, Single Phase Brush Style; 

Shutter is optional (#1219). 

BA0100002 #1203 Blower - High Volume 28 lb 

Housing: Cast Aluminum; RPM: 3,450; WCP: 50 CFM at 4” W.C.; Outlet: 

1-1/2”; Motor: Continuous, 1/3 hp, 115 Volt, Single Phase. (Baldor motor) 

Pieh Legacy Collection/Johnson 

Johnson Gas blowers are sturdy, dependable, balanced and 

with a reputation for efficient delivery of constant air pressure 

and quiet operation. 

PTC1203 Pieh #1203 Blower, High Volume 25 lb 

The Pieh Legacy Collection high volume coal/coke forge blower is 

specially built for Pieh Tool by Johnson Gas Co. It features the sturdy 

#1203 aluminum blower housing used on Johnson’s industrial furnaces. 

Our blower is ready to use! It includes wired power cord and on/off 

switch & mounting plate with bolts. The air gate shutter provides quick 

control of air flow eliminating the need for a rheostat, which can shorten 

the life of a motor significantly. Enjoy years of forging satisfaction with 

a Pieh Tool Blower! Our coal/coke forge is built stock with this blower. 1 

year warranty. Specifications for Blower: 50 CFM at 4 in. W.C. Delivery 

Outlet: 1-1/2” threaded. For Motor: Dayton, Flange Mount, Capacitor 

Start, Continuous Duty, 400-600k BTU, 3,450 RPM, 1/3 hp, 

Single Phase, 115/230 Volt, 60 Hz, 6.8/3.4 Amps. 

Coke/Coal Blacksmithing 

Item # Weight 

COKE Coke 50 lb/BAG 

Our Coke is, ‘bituminous coal’ or known as ‘coal-coke’, from Alabama. 

It is processed and sized (1/4 x 1”) to be used in blacksmith forges. It is 

made from good soft coal and will burn very hot. This is not petroleum coke 

or anthracite coal! 

Moisture 12% Ash 8% 

Volatile 1% Carbon 91% 

Sulfur 0.70% 

COAL Coal 50 lb/BAG 

Our coal comes from West Virginia and is of excellent quality. 

Moisture 2.36% Ash 04.38/04.48% 

Volatile 28.66/29.35% Fixed Carbon 64.60/66.17% 

B.T.U.A.B. 14528/14878 Sulfur 00.69%/00.71% 

Forge/Kiln Linings 

Item # U/M 

RCD Refractory Cement-Dry (GM Drybond) LB 

Refractory Cement contains cristobalite (crystalline silica), hydrous alumina 

silicate, aluminum sulfate. 

KW8 Kao Wool, 8 lb, (1” thick x 2’ wide) LFT 

Used to insulate high temperature furnaces, kilns and gas forges. It has a 

very low density and high purity. It features a maximum temperature rating 

of 2400°F (1316°C). The blanket can be cut with scissors making it possible 

to cut different shapes. It can be coated with a hard refractory to 

protect it from physical damage and creating airborne refractory dust. If 

you are interested in purchasing this coating please contact us. 

General Parts 

Item # 

VFBarb Barb (Male) 1/4” Pipe Thread 

VFFer Ferrule 

PTReg Fisher Regulator 3-35 psi 

VFGV Gate Valve (Ball) 1/4” Pipe Thread 

HOSE Hose (without Barbs or Ferrules) 

VFH-6 LP Gas Hose (with Barbs and Ferrules), 6 ft 

VFH-10 LP Gas Hose (with Barbs and Ferrules), 10 ft 

VFOrif Orifice (not drilled) 

VFPol POL Fitting 1/4” MPT 


WELDING FLUXES, COMPOUNDS, INGOTS 

Welding, Brazing Fluxes 

The Anti-Borax Company was founded in 1902. Today, 

100 years later, the fluxes are still used for bronze brazing, 

cast-iron welding, and other applications used for metal 

joining in blacksmithing and forge processes. Most of the 

compounds we offer are under the Anti-Borax brand name. 

Flux is a chemical compound that is applied to shield the 

joint surface from air and prevents oxide formation. 

Item # 

PEZ1 Pieh EZ Weld, 1 lb 

PEZ5 Pieh EZ Weld, 5 lb 

Pieh EZ Weld is packaged in a convenient 1 or 5 lb can. 

Adheres to metal at a low heat and is equally good for lap, 

split, butt, or jump welding. It enables blacksmiths to weld 

tool steel, plow open hearth and bessemer at significantly 

lower temperatures than other compounds while making 

strong, smooth welds. Can be used with steel as well as 

iron. Prepared by Anti-Borax Co. 

SSW1 Super Stable Weld, 1 lb 

A mixture of forge borax and a welding compound. There 

is little metal filings and works best when welding in a gas 

forge. It is basically the EZ Weld composition, but with a 

lower metal leading (12%). It is used in forge applications 

that require a lower metal concentration in the flux. It 

works like EZ Weld in most forge welding processes, and 

can be used in a wide variety of applications. 

FB1 Forge Borax, 1 lb 

FB5 Forge Borax, 5 lb 

Formulated for forge welding of stainless steel, it helps 

remove oxides and make steel easier to work with at 

welding temperature. Excellent for finishing heats, toe 

caulk and plow work. 

AWB1 Anhydrous White Borax, 1 lb 

Anhydrous Borax (Na2B4O7). A mixture of borax and 

ammonium chloride is used as a flux when welding iron and 

steel. It lowers the melting point of the unwanted iron oxide 

(scale), allowing it to run off. Borax is also used mixed with 

water as a flux when soldering jewelry metals such as gold 

or silver. It allows the molten solder to flow evenly over the 

joint in question. Borax is also a good flux for ‘pre-tinning’ 

tungsten with zinc - making the tungsten soft-solderable. 

CW1 Crescent Welding Compound, 1 lb 

Crescent is a substitute for Borax on fine work forgings. 

Crescent contains no metal filings and thus cleans 

easier. Used for finishing heats, toe caulk and plow work. 

ABBF1 Anti-Borax Brazing Flux, 1 lb 

Brazing powder fluxes provide an alternative to the paste 

fluxes. One may add water and mix the flux to the desired 

thickness. Effective for general-purpose uses. Can be 

used when brazing brass, copper, steel, malleable iron, 

bronze and other metals. Filler Metals: BAg, BCu, BNi, 

BAu, RBCuZn. Temperature range: 1400-2200ºF/760- 

1205ºC. Specifications: AWS A5.31-91, Type FB3J, 

Mil-F-16136B, Type A/Type. 

ABC8 Aluminum Welding Flux #8 *S/O 

Active temperature range, 1500-2900 degrees F, 815- 

1540 degrees C. 

SW Mustad Sure-Weld, 12 oz 

A mixture of forge borax and a welding compound. There 

are little metal filings and works best when welding in a 

gas forge. It is, however, equally effective when used in coal 

forges. Only a small amount is needed for each weld, so it 

is both effective and economical. 

Welding Rods (Borium) 

Item # 

BORF Carbraze Flux Coated Rod, Fine 

BORM Carbraze Flux Coated Rod, Medium 

BORC Carbraze Flux Coated Rod, Course 

Hartwell Carbraze material is for application with an 

acetylene torch and is available in Wear grades. Apply to 

the bottom of horseshoes for maximum wear and traction. 

Pieh EZ Weld 

Super Stable 

Weld 

Forge Borax 

Crescent 

Welding 

Compound 

Brazing Flux 

Aluminum Flux 

Sure-Weld 

Borium Flux 

Coated Rod 

Surface Hardener 

Item # 

CHR1 Cherry Red, 1 lb 



Replaces our old product Kasenit. Kasenit is no longer 

available. Cherry Red instantly case hardens steel 

parts with no special heat-treating equipment required. 

Quickly and easily impart a hard case to steel tools, 

dies, gears, machined parts, metalworking parts, blades, 

fixtures and other wear parts. This non-flammable 

powder material is simple and easy to apply and does 

not require prior case hardening experience. Users 

have reported a 60 Rockwell C hardness on 1018 

steels.*Contains no cyanide. Can ship World Wide. 

Tinning Compounds 

Item # 

ACSOD Acro Soder Tinning Paste, 1 lb 

A pure tinning paste that cleans, fluxes, tins and 

solders in one operation. Recommended for 

tinning auto bodies. It will solder coat all metals 

except aluminum. Can be used in conjunction with 

soldering copper, torch, heating oven or electrical 

heating devices. Is excellent for soldering copper 

fittings. Warning: Corrosive-causes burns. 

ACTIN Acro Tinning Compound, 1 lb 

A pure tinning powder that can be used for tinning 

bearings, radiator connections and auto bodies. 

Apply with steel wool or wire brush. To make paste, 

add water to desired consistency. To tin welds, mix 

with HC1 in glass container and apply while weld is 

still hot. Warning: Corrosive-causes burns. 

‘Acro Soder’ Tinning Paste and Acro Tinning 

Compound are considered Hazardous Materials. 

Appropriate UPS/ FedEx Special Handling 

Hazardous Fees may apply on the shipment. 

It is best to order the largest quantity desired 

to offset the per shipment Hazardous Fee. 

Babbitting Supplies 

Item # 

BABT Babbitrite Damming Compound, 5 lb 

BABT30 Babbitrite Damming Compound, 30 lb 

When you pour Babbitt bearings, you need 

something to use as a damming material to keep 

the molten metal from pouring out of the open ends 

of the bearing shell. This dense putty like material 

(it is similar to the consistency of play-dough), can 

be easily molded around shafts and bearing shells 

to perform its intended task. 

NACFLX Acro No Acid Flux, 9 oz 

Directions for Babbitt: Heat Babbitt to 850 

degrees F. and throw liberal amount of flux on 

surface. After skimming, repeat until there is a 

clean separation of metal and oxides. 

Directions for Zinc: Heat Zinc until quite molten 

and then follow the same instructions for Babbitt. 

Note: ventilation is recommended. 

Ingots 

Item # 

ASTM2 Babbitt Metal, ASTM2 Grade 2, 6-7 lb Ingot *S/O 

(General Purpose) 89% Tin, 7.5 Anitmony, 3.5% Copper 

BRTN Britannia Metal, 6-7 lb Ingot *S/O 

Gravity casting for master mould. 91% Tin, 8% Antimony, 1% Copper 

NILT Babbitt Metal, Nickelite 6-7 lb Ingot *S/O 

Specialized Use. 89% Tin, 7.5% Antimony, 3.5% Copper & Aluminum 

ID10 Babbitt Metal, Ideal #10, 7-8 lb Ingot *S/O 

77.5% Lead, 13.5% Antimony, 9% Tin 

Cherry Red 

Acro Soder 

Tinning Paste 

Acro Solder 

Tinning 

Compound 

Babbitrite 

Acro, No Acid 

Flux 

Call us for 

a quote on 

ingot volume 

orders. 


KNIFEMAKER, BLACKSMITH FORGES 

Mankel Knife Maker 2-Burners 

Open End with Round Bottom 

2-Burner 

shown with 

sides out 

Sides 

come 

out. 

Mankel Knife Maker 3-Burners 

Open End with Round Bottom 

NC Daddy #2, Open End Ports 

NC Daddy #2, Front and Back Ports 

KNIFEMAKER GAS FORGES 

Mankel Wt. 

MKOE2RP Knife Maker with Open End 185 lb 

2 Burners Round Bottom, 115v Blower, Propane 

MKOE2RN Knife Maker with Open End 185 lb 

2 Burners Round Bottom, 115v Blower, Natural Gas 

After the forge is preheated the two burners allow the temperature to reach 2600 degrees F! By 

removing the side bricks, the forge can be open from 3 sides making this the most versatile of 

the Knifemaker Forges. The forge top is lined with Thermotect A Board and the bottom is poured 

refractory cement with radius on the floor. Forge is fabricated of formed steel. It is tough-will take 

just about any abuse. It is also extremely easy to repair. Supplied with manifold, complete with 

orifices, regulator with pressure gauge and 8 ft. hose (differs if ordering Natural Gas). 

Outside Case Dimensions Opening w/ends in 

high wide wide deep 

12” 20” 16” 2” 

MKO3RP Knife Maker with Open End 195 lb 

3 Burners Round Bottom, 115v Blower, Propane 

MKO3RN Knife Maker with Open End 195 lb 

3 Burners Round Bottom, 115v Blower, Natural Gas 

After the forge is preheated the three burners allow the temperature to reach 2600 degrees F! 

By removing the side bricks, the forge can be open from 3 sides making this the most versatile of 

the Knifemaker Forges. The forge top is lined with Thermotect A Board and the bottom is poured 

refractory cement with radius on the floor. Forge is fabricated of formed steel. It is tough-will take 

just about any abuse. It is also extremely easy to repair. Supplied with manifold, complete with 

orifices, regulator with pressure gauge and 8 ft. hose (differs if ordering Natural Gas). 

Outside Case Dimensions Opening w/ends in 

high wide wide deep 

12” 20” 16” 2” 

Mankel Accessories 

MOM Mankel Orifice & Mixer (Specify LP or NG) 

MHOSE-8 Mankel Hose 8’ (LP) 

MBrick Mankel Thermotect Board 

BLACKSMITH PROPANE FORGES 

NC 

Exclusive, high efficiency burners. Push-button ignition. Uniform Heat-Self Regulating to 2350°. 

Quick Recovery-heats and reheats metal very quickly. Flexible-rear bar stock door allows heating 

sections of bar stock. (Optional on some models) No Blower Required. 

May be configured for natural gas. Transportable-light weight and quick cooling. 

Item # Wt. 

NCDAD2-OE Daddy #2, Open End Ports 

3 Burners, Propane 

73 lb 

NCDAD2 Daddy #2, Open Front and Back 


73 lb 

So many forges have such small fireboxes. Not the Daddy! It features a 12 inch long and 6 inch high 

firebox! Imagine all the nice big pieces you can work with in this forge. The barstock port in the front 

and back door is great for isolated heats. The side ports make heating long bar a snap. Work metal 

bar from either end and straight out through the other side when long heat is required in the middle 

of the bar - will accommodate large stacks of metal for production work. Hose, gauge, and regulator 

included. 

Inside Dimensions Door/Openings 

wide high deep wide high 

12” 6” 9” 3” 2” 

NCLB-OE Lowboy, Open End Ports 65 lb 


The Low Boy has an insulated door and 2 side bar stock ports. Has rapid heat recovery for quick 

turn around time. Ideal for competition shoe making and blacksmithing. Knifemakers - this is the 

one to use for Damascus blade forging! 

Inside Dimensions Door/Openings 


12” 3” 9” 3” 2” 

Have you considered taking an artistic blacksmithing class at Pieh Tool? 

NC Lowboy, Open End Ports 


Forgemaster 

When you are in the market for a new portable gas-fired forge, 

you have several makes and models from which to choose. 

General specifications include: 

� Constructed of thick 12 gauge (.109) hot rolled premium steel. 

� Heavy-duty welded two piece clamshell construction. 

� Full 3” heat chamber opening. 

� Needle valve fuel adjustment insures precise distribution of 

fuel flow. 

� Unique slanted base for top mounted door units allows easy 

and convenient access to heat chamber. 

Blacksmith Propane Forges (continued) 

Forgemaster Forges 

Item # Wt. 

50000 Blacksmith* 93 lb 

Double burners with side ports and solid front door. 

Heating chamber dimensions: Width: 13” Diameter: 8-1/2”, Height: 3” (2 boxes) 

50002 Blacksmith -- Dual Valve* 93 lb 

Double burners with dual valves allowing you to turn burners on separately, side 

ports and solid front door. Heating chamber dimensions: Width: 13”, 

Diameter: 8-1/2”, Height: 3” (2 boxes) 

60000 2000* 93 lb 

A stainless steel version of the Blacksmith Model, for enhanced appearance and 

longer life. Double burner with side ports and solid front door. Heating chamber 

dimensions: Width: 13”, Diameter: 8-1/2”, Height: 3” (2 boxes) 

11700 Extended Tool Rest Attached Option* 

Forgemaster Accessories 

11600 Universal Forge Stand 32 lb 

Designed to fit all Forgemaster models. It is constructed of 1" tubular steel and 12 

gauge hot-rolled steel plate. Requires no assembly. Folding heavy-duty stand that 

folds flat for storage or travel, 33x17-1/2x11-1/2 " 

Item # 

30103 E-1 Reliner Kit 

40109 Excalibur Relining Kit 

50103 Blacksmith Reliner Kit 

10119 Companion Forge Reliner Kit 

20111 Farrier Reliner Kit 

20112 Blacksmith/Farrier Reliner-Wall Kit 

30107 Blacksmith/E-1/2000 Door Liner 

20109 Blacksmith/Farrier Top Liner 

20104 Blacksmith/Farrier/Excalibur Hearth Brick 

50106 Blacksmith/2000 28” Fuel Hose 

10127 9 ft. LP Gas Hose 

Outside Case Dimensions Front Opening 

wide high wide deep 

20” 12” 16” 2’ 

BLACKSMITH FORGES 

� Tough and durable powder coated black and silver 

"hammered metal" finish. 

� 9 foot long fuel hose (12” longer than many other forges). 

� Fully-assembled, ready-to-use UL listed regulator and 

pressure gauge. 

� Convenient spark ignitor assembly. 

� Heavy cast iron burners permanently welded to housing top. 

� Quick and easy replacement of lining and hearth brick material. 

� Accessories designed exclusively for Forgemaster enable 

you to customize your forge to suit your needs and applications. 

FORGEMASTER WARRANTY: Forgemaster warrants any of its manufactured products for the expected life of the product against deficiency in material or workmanship. This 

limited warranty does not extend to products manufactured by Forgemaster, that in Forgemaster's judgement were improperly used, altered, abused or repaired by others. 

Item # 

10101 Orifice 

10105 Ignitor 

10106 Lead Wire with Terminal 

10107 Spark Plug 

10126 Regulator, Gauge and POL Kit 

30108 Cast Iron Window Guard for 

E-1, Blacksmith, Excalibur and 2000 

60106 2000 Hearth Brick 

11500 Swing Arm 

Mounts on truck or counter in shop. Fits 

all models. 

Reliner Kits include top, walls, base, hearth brick with clip and heat shield when required. 

* Item #11700 Extended Tool Rest can be attached to any Forgemaster forge at the time of your order. 

Mankel Forge Ship Wt. 

MOE3115P Shop Model 165 lb 

Open End 3 Burners, 115 volt (or 220 volt) 

This forge has a 115 volt powered blower. This forge is designed for the shop. It 

gives fast heat, total heat, spot heat and can braze iron. Three versatile side 

openings allow pieces of any length to be heated in the forge. This forge can heat 

anything from a small job like pony shoes or draft shoes to large ironwork projects. 

The Forge is fabricated of formed steel, with front and side lips of poured thermal 

shock refractory. It is tough-will take just about any abuse. It is extremely easy to 

repair. Supplied with: manifold, complete with orifices, blower with switch, regulator 

with pressure gauge and 8 ft. hose. * Open front or back. Please specify. 

Forgemaster 2000 

Forgemaster Blacksmith 

Forgemaster 

Swing Arm 

Mankel Shop Model 

Forgemaster 

Universal 

Stand 

Shop Model with Side Open 


GAS FORGES 

Pieh Legacy Collection TM Gas Forge 

A gas forge for the Professional Blacksmiths Shop is finally available! 

• Heats 1-1/4” barstock to a yellow heat with ease! • Balanced Gas Mixture - only minimal scale! 

Item # WT 

PTSPF-3 Pieh, The Smithy’s Gas Forge, 3 Burner 75 lb 

PTSPF-3Insert Pieh, The Smithy’s Gas Forge Insert (12 x 20 x 5”) 20 lb 

Pieh Tool is excited to announce “The Smithy’s” gas forge. Our 3 burner forge was designed specifically for 

the artist blacksmith. It boasts the largest firebox available in the portable gas forge market! You now 

have ample space to work with pieces of varying dimensions-awkward pieces can be worked that just won’t 

fit in other forges! Blacksmiths have been limited to forges designed for horseshoer’s - with extremely 

small heating chambers - only 3” high, 6-9” deep and 12-13” wide. Not any more! This makes the perfect 

production shop forge because two smiths can work from both ends. The Smithy’s Gas Forge has three doors 

that flip open allowing different access points. The end doors also feature generous window ports for handling 

long pieces. Both end doors can remain open should you need the extra space while heating pieces with odd 

dimensions. The front door also can be propped open. The heating chamber height can be reduced easily 

by purchasing our Smithy Forge Insert. It all depends on your needs. This will allow you to reduce your fuel 

consumption when the larger space is not needed. And finally, this forge is Insulated! We have done our utmost 

to help conserve your fuel costs. Just check out the specification chart below regarding the insulation used in 

this unit. Relining is a simple task that takes only a few minutes and requires nothing more than a 5/16” wrench. 

• Professional Grade, Commercial Quality! 

• Internal Volume - 1288 cubic inches! 

• Fabricated with 12 gauge steel and a 5/16” frame 

• High efficiency burners - Machined burner bells 

• 3 Burners - Uniform heat 

• 2 Bar-stock ports 

• Heats very quickly - Reaches Welding Heat easily! 

• Flexible - 3 hinged doors and optional adjustable floor 

• Quick and easy relining 

• Venturi Style - No blower needed 

• Portable 

• Quality Guaranteed... Pieh Tool stands behind its products 

• Designed and fabricated in USA 

Operational Manual is included. Forge must be shipped motor freight and arrives ready to use with only minor 

assembly required. *OPTIONAL INSERT AVAILABLE!. When you have a smaller job the insert will reduce the 

forge height to 3 3/4”. This will allow a faster heat and lower fuel usage. Gas pressure can be then be reduced 

to 12-15 psi. 


Burners 3 Machined burner bells (One piece assembly) 

Open Ports 2 End Ports: 5 x 4 3/4" 

Fuel Type LP Gas 

Firebox Height 7" 

Firebox Depth 11 1/2" 

Firebox Width 16" 

Insulation - Doors 1", 8 lb density 2600 degree Cereblanket (Kao Wool) 

Insulation - Rear Wall 1" 2600 degree Ceramic Fiberboard with 1" Cereblanket behind it 

Insulation - Ceiling 2" 2600 degree Ceramic Fiberboard 

Insulation - Floor 3200 degree Dense Ceramic Firebrick 

Regulator Fisher #67CH-743 (3-35 psi) with POL fitting 

Shut Off Valve Needle Valve 

The Smithy’s Forge with Insert installed 

Hose Length 

Shell Dimensions 

9' U/L 

(H x D x W) 3 x15" x 18-1/2" (25" including burner assembly) 

Want to build your own forge? 

Check out # BK742, VF Forge Plans 

(Page 111) Diagram of this forge. 

Victory Forge Gas 2 Burner 

Item # WT 

VFPF-C Victory Forge 2 Burner 27 lb 

VFPF-CB Victory Forge 2 Burner with Bricks 110 lb 

The problem with so many forges is the limitation of the fixed doors and the height of the fire box. Gordon 

Williams (Pieh Blacksmith School Instructor) designed this forge and uses them in all our classes. You 

have flexibility with the bricks used as doors, you can open or close them as much as you need to. The 

forge is shown without bricks (except the bottom brick which we always include). Bricks make the cost 

of shipping much higher. You can order with the 8 bricks for the doors should you choose-or you can 

purchase fire bricks at most Home Depot stores. The forge comes with a Fisher Regulator (3-35 psi) and 

POL fitting, all the necessary orifices, hoses and gate valve. It is ready to use! The forge is lined with 1 

inch thick 8 lb Kao Wool blanket. The forge does not come with a stand so you can put it on whatever you 

choose. We have shown a photo above with it on a stand to give you some ideas. Made in USA 

Fire Box Dimensions: 11” OD / 10” ID 

Length: 8” 

Burners: 2 

Weight: 27 lbs (110 lbs with bricks) 

5” Working Height (from bottom brick to top lining) 

May be shipped UPS. 


Johnson Gas Furnace Forges 

Versatile Johnson Forge Furnaces provide the high, fast heat needed in heavy equipment shops, welding and 

metal forming shops, metal fabricating plants, auto spring manufacturers, blacksmithing, farm equipment and 

industrial maintenance shops, and school vocational shops. Forges can be used for a variety of applications 

including metal bending, metal forging, occasional heat treating, metal forming and sharpening, preheating 

and stress relief of welds. The forge body is made of heavy gauge steel construction with cast iron burner 

manifold and special steel tie-rod reinforcement. Fire boxes are heavily insulated and super duty hardburned 

firebrick is used on all wearing surfaces. Gas and air adjustments are convenient to the operator. 

Johnson Forge Furnaces come complete with quiet, powerful Johnson Blower, swinging adjustable refractory 

lid, adjustable front tool rack for supporting pieces, solenoid safety valve that shuts off gas when blowers 

are turned off, and exclusive Johnson Automatic Spark Ignition System. The need for matches is eliminated. 

Press a button and the furnace light automatically. Ships motor freight. 

All Johnson Forges are *SPECIAL ORDER ITEMS. 

Johnson Furnace 122 Model 

The No.122 has two burners and an electric blower. 

Standard Width 

Item # 

AA-06-00001 Nat. Gas w/Thermocouple Safety Control 

AA-06-00013 L.P. Gas w/Thermocouple Safety Control 

AA-06-00008 Nat. Gas w/Ultra-Violet Safety Control 

AA-06-00020 L.P. Gas w/Ultra-Violet Safety Control0 

Double Width 




AA-06-00021 L.P. Gas w/Ultra-Violet Safety Control 


Four burners with electirc blower. 

Standard Width 

Item # 





Double Width 





Double Width 



Triple Width 



Special Width 



Double Length, Double Width 



GAS FURNACES 

All Johnson Forges are 

*SPECIAL ORDER 

NOTE: All gas forges 

require some minor 

assembly before use. 

Johnson 122 

Johnson 133 

Model No.133 is equipped 

with four burners 

(end burners may be turned off for 

smaller jobs when desired) 

Johnson Furnace/Forge Specifications 

Furnace/Forge Firebox Size Overall Size Burners Blower Gas Connect Gas Input 

(LxWxD) (LxWxD) Model Pipe Size BTU/hr 

122 Standard Width 13-1/2x4-1/4x7” 27-1/2x20x30” 2 1218 3/4” 200,000 

122 Double Wide 13-1/2x8-3/4x7” 27-1/2x20x30” 2 1218 3/4” 200,000 

133 Standard Width 27x4-1/2x7” 41x20x30” 4 1203 1” 400,000 

133 Double Wide 27x8-3/4x7” 41x20x30” 4 1203 1” 400,000 

133 Double Length 54x9x7” 74x25x50” 8 2-1203 1-1/2” 800,000 

133 Triple Wide 27x13-1/2x7” 41x29x30” 8 2-1203 1-1/2” 800,000 

133 Special 36x18x7” 41x36x48” 12 2-1203 1-1/2” 1,200,000 

133 Double Wide/Length 54x8-3/4x7” 80x30x48” 8 2-1203 1-1/2” 800,000 


FARRIER FORGES 

Forgemaster Companion 

Forgemaster Farrier 

Forgemaster E-1 

Forgemaster Excalibur 

Pro-Forge 

Farrier Propane Forges 

Forgemaster 

Standard features on all Forgemaster furnaces include an extra long 9' fuel hose; fully assembled 

UL listed regulator and gauge; convenient spark ignitor assembly; heavy cast iron burners permanently 

welded to top housing, full 11/4" thick molded hearth brick bolted in place. All units are fitted for 

propane, buy may be configured for natural gas. 

Item # Weight 

10000 Companion, Single Burner 45 lb 

Open front. Heating chamber dimensions: Width: 8”, Diameter: 7”, Height: 2-2/3”. Designed for 

modifying pre-made shoes, the single burner unit is small, lightweight and efficient. Convenient for 

farriers to take to the barn for final fittings. 

20000 Farrier, Double Burner 76 lb 

Perfect for horseshoers who work with both hand-made and keg shoes. The front opening is large 

enough to handle draft or saddle-horseshoes with toe clips. 

30000 E-1, Single Burner 81 lb 

Single burner with a front port on door and tool rest. Heating chamber dimensions: Width: 13”, 

Diameter: 8-1/2”, Height: 3”. This fuel efficient forge has closed sides to pack the heat into a larger 

heat chamber using less gas. The E-1 features one port in the tight fitting door and an adjustable 

tool rest for added convenience. 

40000 Excalibur, Single Burner 76 lb 

Front and rear ports and self-closing door. Heating chamber dimensions: Width: 11”, Diameter: 

8-1/2”, Height: 3”. The self-closing door with front and rear ports to the heat chamber make this an 

ideal forge for many jobs involving large bar material. This one-burner, compact forge combines the 

performance of the four larger models with the efficiency of the more compact units. 

Accessories for Forgemaster are with the Blacksmith Forge Accessories, on page 69. 

Cliff Carroll Pro-Forge 

Item # Weight 

PF-200 Pro-Forge, Twin Interchange Jets 60 lb 

The propane Pro-Forge, known worldwide to shoers, is rugged in construction and will withstand 

wear and tear. It operates with a clean fast heat that is easy to weld without sacrificing fuel 

efficiency. This forge has a bar stock port on the left end, cast iron doors that do not warp, and a 

hassle free ignition system with twin interchange jets that realign instantly after cleaning. It also has 

hearth plates you can change right through the front door. A barstock support and welding plate is 

available making the forge more versatile. 

Time for first heat of the day: 4 minutes. 

Normal Heats (depending on shoe size): 2-1/2 to 3-1/2 minutes. 

Working Pressure: Average 7-10psi; 

Welding Pressure: 10-12 psi 

Temperature: 2450 degrees Fahrenheit at 7 lbs.; higher temps at higher pressures. 

Outside Case Dimensions Firebox Depth Door Opening 

wide high length high long high 

15” 17-1/2” 16” 8” 12” 3-1/2” 

PR-201 Pro-Forge Reliner Kit 18 lb 

Includes firebox, soft door, cushion, gasket and hearth plate 

PF-223 Welding Brick, 6 x 6 “ 3 lb 

Mankel 

Item # Weight 

MOE2+4115P Mankel, Horseshoers, Open End +4 85 lb 

2 burners, 115 volt blower 

This is Mankel's oldest model-since 1976. The forge should be used to heat your material and then 

shut down. The bottom and top are lined with 2800 degree insulation material that reflects the heat 

right now. The front and side lips are made of the refractory material. This lining should give you 

two or more years of life. Three versatile side openings allow larger pieces to be heated in the 

forge. This forge can be used to weld bar shoes and even make knife blades. Forge is fabricated of 

formed steel. It is tough-will take just about any abuse. It is also extremely easy to repair. Supplied with: 

Manifold, complete with orifices, Blower with switch, Regulator with pressure gauge 8 ft hose. 

Outside Case Dimensions Opening (with ends in) 

wide high deep wide deep 

17-1/2” 19” 17” 13” 2” 

Mankel Horseshoers 


FARRIER PROPANE FORGES (continued) 

NC 

Item # Weight 

NCBABY Whisper Baby 

1 Burner with Rear Port 

37 lb 

A handy gas forge for quick small jobs. Does not get hot enough to forge weld, however. This 

single burner forge will heat and reheat metal very quickly during work cycle. The heat remains 

2350 degrees into corners with no cold spots. There is a push button spark ignition built right 

in. The bar stock door in rear allows heating sections of bar stock. Larger pieces may be heated 

with the front furnace door open. Hot fit your keg shoes Red Hot. This forge works well for many 

blacksmithing procedures. 

Inside Dimensions Port Opening 


7” 3” 6-1/2” 3” 1-1/2” 

NCWD-BD Whisper Deluxe, Rear Port 47 lb 

2 burners 

Hot fit your keg shoes Red Hot. This forge works well for many smaller blacksmithing procedures. 

Inside Dimensions Port Opening 


12” 3” 6” 3” 1-1/2” 

NCWM-OE Whisper Momma, Open End Ports 51 lb 

2 burners 

Forge has a solid insulated door which keeps the heat away from the user and the wind away 

from the fire box. End ports allows bar stock to be worked from either end or allows the user a 

12” heat in the middle of the bar. Perfect portable shoeing forge! Reaches welding temperature 

in 3 minutes. Will heat stacks of metal for repetition forging. Works well for smaller blacksmithing 

procedures. 

Inside Dimensions Port Openings 


12” 3” 6” 3” 1-1/2” 

NC Forge Accessories 

Item # 

0132 Reliner Kit for Daddy 

0133 Reliner Kit for Low Boy 

0135 Reliner Kit for Whisper Deluxe (Mfg before 1989) 

0136 Reliner Kit for Whisper Deluxe (Mfg after 1990) 

0137 Reliner Kit for Momma (Mfg before 1989) 

0138 Reliner Kit for Momma (Mfg after 1990) 

0182 Low Boy Door Liner 

01356 Hose, 8’ 

0140 Quick lite #3 (cast iron burners) 

0140A Quick lite #2 (for old Al and cast iron burners) 

0144 Orifice 

0168 Ball Valve 

0197A Welding Brick 

Check out the Jet Hydraulic Pipe Bender 

Bend 2” Pipe Easily! 

Simple manual operation! 

Includes 6 bending dies! 

See page 71 

FARRIER FORGES 

NC Whisper Baby 

NC Whisper Deluxe 

Whisper Momma 

Please call to order 

replacement parts 

and reliner kits for 

any of the forges we 

offer. We cannot list 

them all! 


CRUCIBLE FURNACES, CRUCIBLES 

Johnson 900SS Crucible Furnace 

Johnson 920 Crucible Furnace 

Johnson 950 Crucible Furnace 

Key 

T Thermocouple Safety Control 

UV Ultra Violet Safety Control 

#4 Crucible #16 Crucible 

#10 Silicon 

Carbide 

Crucible Specification Chart 

# 20 Crucible 

Top Bulge Bottom 

Crucible Height Diameter Diameter Diameter 

#4 5-3/4” 4-5/8” 4-9/16” 3-1/8” 

#10 8-1/4” 6-1/8” 6-5/8” 4-3/4” 

#16 9-1/2” 7” 7-1/2” 5-1/2” 

#20 10-1/8” 7-7/8” 5-5/16” 6-1/8” 

#30 11-1/2” 8-3/4” 9-7/16” 6-3/4” 

#50 13-5/8” 10-1/4” 11” 8” 

#60 14-9/16” 10-7/8” 12” 8-7/8” 

CRUCIBLES/ACCESSORIES 

Indianhead and Starbide Capacity 

Item # *SPECIAL ORDER (Red Brass) 

25-02-00001 #4 Crucible - Graphite 10 lbs 

25-02-00002 #4 Crucible - Silicon Carbide 10 lbs 



25-02-00008 #10 Bottom Pour Crucible 36 lbs 



25-02-00007 #16 Bottom Pour Crucible 53 lbs 

25-02-00009 #20 Crucible 74 lbs 


25-02-00011 #30 Crucible 81 lbs 






Johnson Crucible Furnaces 

These rugged, highly efficient furnaces are designed for melting such metals as aluminum, brass, silver 

and gold. They combine fast melting with simple, quiet operation. The furnaces are made of heavy gauge 

steel. The furnace linings are of highest quality super-duty hard-burned firebrick backed with over 2” of 

high temperature insulation to reduce heat loss and provide comfortable working conditions. Controls, 

blower and safety equipment are contained in an attractive, adjustable metal console, protected from dust 

and shop hazards. Console is specially sound-proofed for quiet operation. Other features include: pushbutton 

lighting, low furnace height, special furnace lid that allows operator to charge crucible through the 

lid and Johnson Safety Systems. NOTE: All gas forges require some minor assembly before use. 

All Johnson Crucible Furnaces are *SPECIAL ORDER. 


Item # T UV 

AA-07-00001 Nat. Gas x 

AA-07-00022 L.P. Gas x 

AA-07-00014 Nat. Gas x 

AA-07-00035 L.P. Gas x 

AA-07-00002 Nat. Gas, #10 Crucible x 

AA-07-00023 L.P. Gas, #10 Crucible x 



AA-07-00003 Nat. Gas, #10 & #16 Crucible x 

AA-07-00024 L.P. Gas, #10 & #16 Crucible x 

AA-07-00004 Nat. Gas, #10, #16 x 

& #10 Bottom Pour Crucible 

AA-07-00025 L.P. Gas, #10, #16 x 

& #10 Bottom Pour Crucible 

Johnson Furnace 900SM Model 

AA-07-00005 Nat. Gas, #10 Crucible, 6 x 8 Pot x 

AA-07-00026 L.P. Gas, #10 Crucible, 6 x 8 Pot x 

AA-07-00018 Nat. Gas, #10 Crucible, 6 x 8 Pot x 

AA-07-00039 L.P. Gas, #10 Crucible, 6 x 8 Pot x 

Johnson Furnace 900SS Model 

AA-07-00006 Nat. Gas x 

AA-07-00027 L.P. Gas x 




AA-07-00008 Nat. Gas x 

AA-07-00029 L.P. Gas x 

AA-07-00009 Nat. Gas with #20 Crucible x 

AA-07-00030 L.P. Gas with #20 Crucible x 

AA-07-00010 Nat. Gas with #20 & #30 Crucibles x 

AA-07-00031 L.P. Gas with #20 & #30 Crucibles x 

Johnson Furnace 920SS Model 








AA-07-00034 L.P. Gas with /#60 Crucible x 

Johnson Console 

HA-04-00457 Console Complete for 920/950 Furnace 

Adjustable Crucible Shanks 

Item # *SPECIAL ORDER 

30-01-00011 Hand Shank w/Safety for #10 & #16 Crucibles 

30-01-00013 Fixed Band Shank, Single End 

with Safety for #10 and #16 Crucibles 

30-01-00014 Fixed Band Shank, Single End 

with Safety for #20 and #30 Crucibles 

Crucible Tongs *SPECIAL ORDER 

30-01-00001 Plain for Crucible No. 10 



30-01-00006 Bent Handle for Crucible No. 10 





Ceramic Shell Burn-Out Furnaces 

Johnson 

Item # All Johnson Forges are Special Order 

99-IN-MISC36 36" Ceramic Shell Burn-Out Furnace 

99-IN-EXT36 12" Extension for 36" Ceramic Shell Burn-Out Furnace 

99-IN-MISC28 28" Ceramic Shell Burn-Out Furnace 

99-IN-EXT28 2" Extension for 28" Ceramic Shell Burn-Out Furnace 

The NEW Johnson Ceramic Shell Burn-Out Furnace The new Johnson Ceramic 

Shell Burn-Out Furnaces are fast, clean, safe, easy to operate and affordable. They are 

designed for use by artists and industry alike for both training and high production work at 

a cost dramatically lower than conventional alternatives. Johnson is the first ceramic shell 

burn-out system easily within the grasp of every Department of Art and fine arts foundry. 

Fully Engineered, Low Cost, Wax Burn-Out System The Johnson Burn-Out System 

incorporates all the technology of the ceramic shell process of lost wax casting that is 

frequently accomplished with expensive, complicated and often dangerous autoclave/kiln 

systems. The BIG 3'x3' I.D. expandable Johnson Burn-Out Furnace is designed to safely 

and economically ready a ceramic shell as large as 3'x4' through the complete ceramic 

shell process in minutes, rather than hours. 

Fast, Economical Heat Powerful, continuous-duty Johnson blowers combined with 

specially designed tangent flame burners insure the uniform spread of flame in the heat chamber. 

This produces the fastest burn-out and curing times and insures economical operation. Johnson 

Furnaces reach 1800° F. (shell pouring temperature) in less than 20 minutes! 

Easy, Safe Operation The furnaces have special elevated heating chambers for easy 

wax collection and removal. They feature a rollable stainless steel cart and pan for 

collecting evacuated wax for recycling. A specially designed counterbalanced lid is easy for 

one man to operate fast, safe, ceramic shell loading and removal. The versatile Johnson 

Ceramic Shell Burn-Out Furnace is designed for use by artists and industry alike. 

Spark Ignition and Safety Controls Johnson Burn-Out Furnaces operate with a 

simple push of a button. They feature a "Flame Rod" safety system and an integrated 

pyrometer for accurate temperature indication. The furnace's low admission to atmosphere 

further adds to its appeal and meets most environmental emission standards. 

Wide Temperature Range Versatile Johnson Burn-Out Furnaces are designed to 

provide both a low temperature "bushy" type flame for the wax evacuation cycle, and high, 

fast heat for the shell curing cycle. 

Rugged Construction - Compact Design Johnson Burn-Out Furnaces are built of arcwelded, 

heavy-gauge steel with special firebox reinforcement. Burners are cast iron. The 

big heat chambers are heavily insulated with highest quality poured castable refractory. The 

furnaces are compact. They will easily fit in a 10'x12' area, saving valuable floor space. 

We are happy to send you a quote for shipping charges. 

CASTING FURNACES 

Wilton Vises are made in the USA 

Ceramic Shell Burn-Out Furnace 


BLACKSMITH KITS 

Item # 

B-K1 Blacksmith Kit 1 - Beginner 

Kit Includes: 

20566 Block Brush, 1-1/4” 

KV28L Kevlar Knit Gloves, Large (pair) 

BWB Beeswax Bar, 1-1/4 oz. 

6175010300 Peddinghaus Wolf Jaw 300 mm Tong 

PT4021 Billy Tong, V-Bolt 3/8“ 

PT4022 Billy Tong, V-Bolt 1/2“ 

PT4037 Billy Tong, V-bit 1/4” 

PT4002 Billy Tong, Box Jaw 3/8 x 3/4” 

5039020800 Peddinghaus, German Cross Pein 800 Gr. 

VC000 Pieh Tool, Veining Chisel (S7) 

CP000 Pieh Tool, Center Punch (S7) 

BK206 A Blacksmith Primer, Book 

DVD9 Leaves and Flowers, DVD 

92910-01 Welders Silver Pencil (3 Pack) 

WHR W-Brand, Shoers Ruler 

RB1150 Radians, RAD Band Hearing Protection 

RV0110ID Radians. Revelations Safety Glasses (Clear) 

PTC-BALB Pieh Tool Blacksmith Lap Apron, with Belt 

Kit 1 + Kit 2 

= Kit 3 

A variety of basics to get you started. Substitutions are 

allowed. *We reserve the right to substitute an item. 

Item # 

B-K2 Blacksmith Kit 2 - Intermediate 

Kit Includes: 

05190 Half Round Pipeliner File 

TG4 Wood Rasp Handle, Screw-on 

5039021000 Peddinghaus, German Cross Pein 1000 Gr. 

5044031000 Peddinghaus, Swedish Cross Pein 1000 Gr. 

EP188 Pieh Tool, Eye Punch 3/16” (S7) 

PT4010 Billy Tong, Rivet, 3/8” 

PT4000 Billy Tong, Box Jaw 1/4 X 3/4” 

PT4005 Billy Tong, Box Jaw 3/8 x 1” 

PT4006 Billy Tong, Box Jaw 1/2 x 1” 



PT4046 Billy Tong, Duckbill 3/16” 

PT4042 Billy Tong, Small Scrolling 

SSW1 Super Stable Welding Compound, 1 lb. 

GMSB-A Green Mengel Swage Block, A 

DVD6 Forged Animal Heads, DVD 

BK68 Iron Menagerie, Book 

Item # 

B-K3 Blacksmith Kit 3 - Advanced 

Kit Includes: 

PT4012 Billy Tong, Rivet 3/4” 

PT4017 Billy Tong, Triple Pickup 

PT4013 Billy Tong, Single Pickup Small 

DVD4 A Blacksmith Primer Course - 3 Disc, DVD 

BK213 The Contemporary Blacksmith, Book 

BK732 Fireplace Accessories, Book 

BK932 Forged Architectural Metalwork, Book 

DP250 Drift Punch 1/4” (A-33 Tool Steel) 

FP375 Pieh Tool Fuller Punch, 3/8” 

PTCH1 Pieh Tool Chisel Hardy, 1” 

GPCB Gilders Paste Celtic Bronze (Metallic) 

JHM160 JHM 160 lb Anvil 

CHR-1 Cherry Red Hardening Compound, 1 lb. 

PTCM1 Pieh Tool, Cone Mandrel 1” 

TF1 Pieh Tool, Turning Fork 1” 

50000 Forgemaster Blacksmith Double Burner Forge 

Have you considered taking our blacksmith classes that we offer at Pieh Tool in Camp Verde, Arizona? 

“The Bill Pieh Resource for Metalwork” See page 39 


CLOTHING, SUSPENDERS & GIFTS 

Clothing 

Men’s Work Shirts 

Key Hickory Stripe Logger Shirt, Long Sleeve 

9 oz. 100% cotton. Double needle stitching. Zipper front. 

Two button adjustable cuffs. Button on sleeve vent. Two 

chest pockets with mitered pocket flaps. Banded collar. 

Item # 

575.47 Button Down 

Sizes: S, M, L, XL, 2XL, 3XL, M-Tall, 

L-Tall, XL-Tall, 2X-Tall, 3X-Tall 

Key Hickory Stripe Logger Pullover Shirt 

9 oz. 100% cotton. Double needle stitching. Antique 

brass zipper. Two button adjustable cuffs. Two chest 

pockets with mitered pocket flaps. Banded collar. 

Pleated back yoke. Collar stays. Pencil stall. 

573.47 Pullover 

Sizes: M, L, XL, 2X, 3X 

Tall sizes available by special order. 

Key Western Welders Shirt, 

Long Sleeve 

9 oz. 100% cotton. Double needle stitching. 7 snap 

closure (8 snap front closure on tall sizes). Snap 

closure at neck, 3 snaps on cuffs and Snap on 

sleeve vent. Two chest pockets with flaps. Banded 

collar. Western front and back yokes. Pencil stall. 

519.24 Khaki 

Sizes: M, L, XL, 2X, 3X, 

M-Tall, L-Tall, XL-Tall, 2X-Tall, 3X-Tall 

Tavern Puzzles ® 

Tavern Puzzles® evolved from reproductions of hand forged artifacts that Dennis 

Sucilsky came across while researching architectural hardware. The Collection is 

divided into groups that become progressively more difficult. All puzzles are made 

from 6mm steel; some include wooden beads. Dimensions: 8-14” long, 4-6” wide. 

Weight: 12-20 ounces. Each puzzle comes in its own bag. 

Item # 

PZ-IRHT Iron Heart (A) Level: Basic 

PZ-BLKJ Black Jack (B) Level: Basic (Group 2) 

PZ-TVWO Traveler's Woe (C) Level: Intermediate 

PZ-UTRN U-Turn (D) Level: Difficult 

PZ-BKRG Blackbeard's Revenge (E) Level: Difficult 

PZ-BEST Best Ever (F) Level: Difficult/Complex 

PZ-DBTR Double Trouble (G) Level: Complex 

PZ-FREE Freedom's Ring (H) Level: Complex (Group 8) 

A B C D E F G H 

Leather Suspenders 

All suspenders are made of 9 to 10 oz. 

American Tanned Leather. They have 3 

scissor snaps that fasten to belt loops and 

are 1-1/2” wide and an estimate 13-1/2” 

long with elastic band in the back. Measure 

from the top of the front belt loop to the top 

of the back belt loop in the middle of pants 

to get the correct size. Hand crafted locally 

in Camp Verde, Arizona USA. 

Item # 

S42P Suspender Plain, Small 

S44P Suspender Plain, Medium 

S46P Suspender Plain, Large 

S48P Suspender Plain, XLarge 

S42B Suspender Basket, Small 

S44B Suspender Basket, Medium 

S46B Suspender Basket, Large 

S48B Suspender Basket, XLarge 

Pieh Tool Gift Items 

Pieh T-Shirt 

Our white T-shirt’s are silk screened with our B/W 

Logo on front and the full color logo transferred 

on the back. Below the logo reads World’s Best 

Blacksmith Supply. Shirts are Gidian® Ultra Cotton 

(100% cotton jersey) and lightweight (6.1-oz) with 

a seamless double-needle collar, taped neck and 

shoulders, double-needle sleeve and bottom hem. 

Makes a great birthday, Christmas or any time present! 

Short Sleeve Long Sleeve 

Item # Size Item # Size 

PIEHT-S S PIEHTLS-M M 

PIEHT-M M PIEHTLS-L L 

PIEHT-L L PIEHTLS-XL XL 

PIEHT-XL XL PIEHTLS-2X 2X 

PIEHT-2X 

Pieh Hat 

2X 

Our Sportsman Twill hats fit very comfortably and 

look nice on men and women alike. Our Pieh Tool 

logo is embroidered in 4 color in the front. On one 

side reads Blacksmith Supply. 

Features: 

• Structured front • 6-panel construction 

• Velcro closure • Low profile 

• Pre-curved visor • Stitched eyelets 

• Made of 100% cotton 

Item # Color 

PHAT-KH Khaki 

PHAT-BL Royal Blue 

PHAT-BK Black 

Hand Forged Jewelry 

Sarazona Designs owner Sarah Harms 

creates original forged steel and silver 

jewelry, sure to engage conversation. 

They are truly stunning and unique. All 

pieces are protected with renaissance 

wax. The necklaces have an adjustable 

black cotton cord that can be worn 

long or as a choker. Artist’s choice 

of beads accents both the necklaces 

and earrings. Forged locally in Camp 

Verde, Arizona USA. 

Item # 

S5 Heart Necklace, 2” 

S3 Spiral Necklace, 1-3/4” 

S7 Heart Earrings, 1-3/4” 

S8 Spiral Earrings, 1-3/4” 

Hat Racks 

Finally a place to hang your hat where 

it won’t get sat on, knocked on the 

floor or mis-shaped. The Lid-Locker 

is spring-loaded to securely hold your 

hat. All units are made of steel, powder 

coated for a lasting finish in a beautiful 

copper tone. Hand-made locally in 

Camp Verde, Arizona USA. 

Item # 

LLWM Lid-Locker Wall Mount 

For the home or in the trailer while 

you travel. 

LLSM Lid-Locker Seat Mount 

An adjustable, slotted bracket with a 

clamping knob allows the bracket to be 

slipped over and fitted to the top of the 

seat in a vehicle. The unit may be used 

in a forward or rear facing direction 

and will hold the hat approximately 2” 

from the back of the seat. 

T-Shirt-Short Sleeve 

T-Shirt-Long Sleeve 

Shirt Front 

B/W, Left Chest 

Shirt Back 

Full Color, Center 

Enjoy these gifts yourself 

or for family members 

and friends. 

Great for any occasion! 


BOOKS KNIFEMAKING 

KNIFEMAKING 

BK990 

500 Knives, Celebrating Traditional & 

Innovative Designs, Le Van 

384 pages, 8 X 8 (Softcover) 

Contemporary knifemakers are far more daring 

than their counterparts from as recently as a 

generation ago: they’ve become masters of new 

techniques and technologies, experts in reinterpreting 

form and function to create sculptural works of art. Flip 

through this amazing on-the-page gallery, and you’ll discover a dizzying 

array of styles, from ones that demonstrate simple elegance 

to others that feature over-the-top embellishment. The collection 

includes daggers, kitchen knives, hunting knives, combat and folding 

knives, switchblades, multi-blades, swords, axes, tomahawks, and 

even a pistol-knife, all honed with fine creative vision. 

BK614 

$50 Dollar Knife Shop, Goddard 

156 pages, 8-1/2 x 11 (Softcover) 

Outfitting a knifemaking shop doesn’t have to 

cost a fortune and Wayne Goddard shows 

hobbyists how to do it on a budget. This book is 

well illustrated with great photos and detailed 

diagrams showing the design and construction 

of all the tools needed to make knives. Every 

knifemaker will want to learn how Goddard can create or acquire 

knifemaking supplies at almost no cost. 

BK835 

Ancient Northern European Axes, 

Gränsfors 

28 pages, 6 x 6, (Paperback), The Ancient 

Northern European Axes Book, published by 

Gränsfors Bruks of Sweden. This book introduces 

the use of axes in Northern Europe and also 

through the ages as their use has changed. It has an excellent 

illustrated reference area on all of the axes and their uses. B/W 

photos & illustrations. 

CD796 

BK449 

Antler & Iron II: Building a Mountain 

Man Folding Knife, Chapman 


Shows how to build Mt. Man Folders. Blacksmiths, 

bladesmiths and knifemakers will find this an 

invaluable addition to their reference library. Over 

100 photos and drawings show step-by-step 

construction of a “Times Gone By” masterpiece. This folding knife 

can be built just like our forefathers would have, without power tools. 

BK953 

Antique Swords & Daggers, Veleanu, 

Hayes 

288 pages, 9 x 12 (Hardcover) 

A fascinating collection of edged weapons from 

Europe, America, the Middle East, Asia, Japan, 

and Africa. It includes their characteristics, 

historical uses, and current values. 

1290 illustrations. 

BK938 

Art of the Knife, The, Kertzman 

256 pages, 8-1/4 x 10-7/8 (Hardcover) 

The photography is stunning showing clarity and 

detail. Packed full of information on the knifemakers 

and history on the knife presented-500 of the 

world’s finest art knives made. These are the 

artists’ art knives-sculpted cutting machines 

embellished with scrimshaw, engraving, gold, precious stone inlays, 

carving and etching. It’s a parade of pearl, ivory, mammoth tooth, 

Damascus, silver wire, exotic wood, diamonds, rubies and more. 

BK974 

Axe and Man, The, Heavin 

182 Pages, 8-1/2 x 11 (Hardcover) 

A vast range of axes starting with the early stone 

hand axes of the paleolithic period. Since the 

history of the axe is difficult to separate from 

the history of man, this study has become the 

history of early man’s stone and metal technology 

as exemplified by his axe. Technology is not only 

an important part of every culture, but it usually affects such other 

aspect as the economic, political, social and religious. The degree 

of advancement of man’s technology is not only reflected directly in 

his tools and weapons themselves, but also in his means of agriculture, 

kinds of transportation, the sophistication of his buildings and 

the degree of his artistic development. Over 100 illustrations. 

BK834 

Axe Book, The, Gränsfors 

36 pages, 6 x 6, (Paperback), photos & illustrations 

Crafting Tools Instruction Manual and Help 

The Axe Book contains information on axes. The 

philosophy behind the axes being produced today 

at Gränsfors Bruks: parts of the axe, limbing a log, 

working with a carpenters axe, woodworking, and axe throwing. 

• Which axe should I choose? 

• Gränsfors Bruks axe forge in northern Hälsingland 

• Basics of firewood splitting 

• To dry and store firewood 

• To make a fire in woods and fields 

• Caring for your axe 

• Fitting an axe with a handle 

BK460 

The Complete Bladesmith, Hrisoulas 

192 pages, 8-1/2 x 11 (Hardcover) 

Build your own forge, equip your workshop, choose 

your materials and get to work. You’ll jump at the 

chance to heat the steel: bending, twisting, folding, 

cutting and stretching it. Finally, you’ll put the perfect 

grind on the new blade, make your own scrimshaw, 

fit the softest, hardest or most exotic wood to the 

grip, and slip your blade into your handmade sheath. Whether you want 

a survival blade, commando dagger, medieval broadsword or just a 

utility knife, it’s all here. 


BK469 

Custom Knifemaking, McCreight 

220 pages, 7 x 9 (Softcover) 

The helpful book demystifies the ancient art of 

bladesmithing for contemporary knifemakers. 

Following chapters on tools, set up and sheath making, 

the book provides 10 projects of increasing complexity to 

lead either beginner or advanced metalworkers into this 

exciting discipline. 180 illustrations. 

BK646 

Damascus Steel, Sachse 


His vast knowledge of historical records have 

made Sachse an undisputed and internationally 

renowned expert in all aspects of damacus steel. 

His authentic style of describing the techniques 

and the cultural myths, that have surrounded the 

old craft, impress experts an interested layman 

alike. The illustrations perfectly combines technical 

detail drawing with colourful photography, A German edition 

“Damaszener Stahl” is also available by request. 

BK968 

Fancy Knives: Materials and Decorative 

Techniques, Siebeneicher-Hellwig, Steigerwald 


Offers insights into the materials used in making 

knives, their qualities, and various working and 

decorating techniques. A special chapter gives the 

reader instructions for making his own knife. Included 

is also valuable information about steel, knife blades, 

handle materials, decorative techniques, making sheaths and purchase 

and care. Stefan Steigerwald, ranks among Germany’s best-known knife 

makers. Ernst Siebeneicher-Hellwig, teaches knife making courses and is 

an instructor at the Bavarian Hunting School. 290 illustrations. 

BK955 

Heritage of English Knives, The, 

Hayden-Wright 


This is the preeminent reference on antique 

English knives, written by one of Great Britain’s 

most respected 20th century authorities on 

weaponry. The text contains much previously 

unknown historical information about cutlers and 

their art. The history of the famous American 

designed Bowie knife, manufactured extensively in Sheffield, 

is explained and amply illustrated. Discussions present multibladed 

sportsmen’s pocket knives, farrier’s, smoker’s, quill knives, 

curiosities, and actual knives presented to King George IV in 1821. 

301 color and 20 B&W illustrations. 

BK446 

How to Make Knives, Barney/Loveless 


Complete instructions on making high quality 

handmade knives. Forging and stock removal, 

mirror polishing, sheath making, safety techniques, 

required tools and supplies and more. Step-by-step 

information and photos. Tips from Bob Loveless, 

Bill Moran, Buster Warenski and Corbet Sigman. 


BK454 

Iron Age Primitives, Chapman 


Covered: Two knives, dag and adz, forging a 

copper guard and swaging it on the tang, Hafting 

the adz on an antler handle, building an antler saw 

from scratch, making a spring for a pocket sheath, 

using pitch, sinew and hide glues on handles and 

a simple hot iron die used to forge a ribbed blade. 

BK472 

The Japanese Sword, Sato 


This lavishly illustrated volume is an introduction to 

the history and appreciation of the Japanese Sword. 

Surveying 1500 years of sword history in Japan, it 

deals with nearly every aspect of sword lore, including 

forging techniques and problems of appraisal. The 

book’s centerpiece is a detailed examination of over a 

dozen of Japan’s most revered blades such as the O-Kanehira and the 

Dojigiri by Yasutsuna, perhaps the two finest swords in Japan. 

BK831 

Knifemaking with Bob Loveless, Hollis 

192 Pages, 8-1/4 x 10-7/8 (Hardcover) 

Build Knives with a Living Legend 

All of the knife industry has been touched by 

the late Bob Loveless, a pioneer in knifemaking. 

This book written just months before his death 

is an inspiration for all knife enthusiasts. It is 

a look into the Loveless’ workshop and his life. 

You’ll learn his methods for creating a knife including tempering 

and design, the tools he used, and care of your knife. He was an 

innovator in his field and this book is a tribute to him and his craft. 

“While this may not be the last word in a biography of this knifemaking 

legend, it certainly is a good start of filling in the blanks.” - Steven 

Dick of Tactical Knives Magazine. Over 200 photos. 

CD798 

Little Uglies, Chapman 

CD/PDF 

Little Uglies II, is an updated version of the original 

“Little Uglies” book. It’s packed with more photos, 

drawings, shop tooling and knives, some forging 

sequence images are borrowed from his other 

publications. The revision has 17 more pages than the original. 

BK461 

The Master Bladesmith, Hrisoulas 


This advanced study of steel reveals forging 

secrets that for centuries have been protected by 

guilds. Never-before-seen instructions, diagrams 

and photos explain the tricks behind using 

Japanese mokume gane, differential heat treating, 

power hammers, and other techniques to make 

kukris, wavy blades, spears and swords that bear the master’s mark. 

BK453 

Nose to the Grindstone, Chapman 


A fixed blade and simple folder are illustrated 

with step by step instructions using hot and cold 

iron techniques. Building a simple touchmark is 

covered along with an “Antler Drilling Engine” and 

a few Damascus tricks thrown in. 



BK462 

The Pattern Welded Blade, Hrisoulas 


Jim Hrisoulas reveals the secrets of this ancient 

craft. From the welding of the starting billet to the 

final assembly of the completed blade, Hrisoulas 

provides in-depth instruction in forging basic, 

precise patterns and the more stunning complex 

designs. 

BK464 

Razor Edge Book of Sharpening, Juranitch 

145 pages, 8 x 9-1/4 (Softcover) 

Recognized as “The Bible Of The Cutting 

Edge,” it belongs in the library of anyone 

who’s serious about sharpening. Written by 

Guinness world record holder John Juranitch, 

it contains all the knowledge and insights 

gained during his more than 45 years in the 

sharpening industry. Crammed with photos, illustrations and cutting 

edge secrets you won’t find anywhere else. This book covers topics 

like how to choose a knife, sharpening theories and applications, 

steeling, using a hone and more. You’ll get answers to the most 

asked sharpening questions. You’ll learn the truth about common 

myths like why you should never use oil on a hone. 

BK650 

Sharpening and Knifemaking, Watson 


In a process handed down from his grandfather, 

Jim Watson illustrates sharpening techniques for 

numerous woodcarving tools and knives of various 

sizes and shapes including pocket knives and 

kitchen knives. The necessary materials for proper 

sharpening are listed and discussed with methods 

for reconditioning and making your own new knives and tools as 

well as information on resurfacing the sharpening stones. 

BK829 

Spirit of the Sword, Shackleford 

240 Pages, 8-1/4 x 10-7/8 (Soft Cover) 

A Celebration of Artistry and Craftsmanship. 

You will go through a stunning visual journey of the 

history of the simplest and greatest weapon ever 

devised. Whether you’re a historian, collector or 

enthusiast you will get everything from fascinating 

information on the history of swords from around 

the world to the helpful tips on collection and displaying swords 

in this book! Live the Legend. Feel the Steel. Steeped in lore and 

legend, swords evoke images of samurai swordsmen, knights in 

shining armor, the glint of hardened steel, the charge of mounted 

cavalry. Spirit of the Word is a stunning visual journey through the 

history of the simplest and greatest weapon ever devised. More 

than 300 detailed photos of swords throughout the centuries and 

from around the world are shown, along with scenes from the 

ancient swordmaking capitals of Europe. Includes the magic of the 

Japanese sword and a profile of Yoshindo Yoshihara, the world’s 

greatest living swordsmith. Swords on the Big Screen: a cinematic 

exploration of sword mythology. 300 photos. 

BK96 

Success with Sharpening, Laughton 

176 pages, 8-1/4 x 10-7/8 (paperback) 

Success with Woodworking 

Accessible and jargon-free for even 

inexperienced woodworkers, and illustrated 

with 200 color photographs and diagrams, this 

first in the Success with Woodworking series 

tackles a fundamental, yet vital for success, 

woodworking process: tool sharpening. From the 

reasons why blunt tools ensure poor-quality work to advice on how 

to achieve the perfect cutting edge, this introductory guide makes 

the theory and mechanics of sharpening easy to understand. It 

covers sharpening by hand, from oilstones and honing to slips and 

strops; machine sharpening, including controlling heat buildup and 

grinding wheels; and how to sharpen specific tools: turning and 

carving tools, marking devices, scrapers, planer blades, green 

woodworking tools, and household items. With these hands-on 

exercises and practical advice, top-quality work is guaranteed. 

BK830 

The Wonder of Knifemaking, Goddard 

160 Pages, 8-1/4 x 10-7/8 (Softcover) 

“Your questions, comments, and sometimes 

complaints are what keep me going as a writer. 

Keep it coming!” ~ Wayne Goddard 

As a columnist for BLADE Magazine, Wayne 

Goddard has been answering real questions 

from real knifemakers for more than 20 years. 

Now, find all the details in one place in this handy reference 

for every knifemaker, amateur or professional. It has clear and 

precise answers on every aspect of knifemaking, from selecting 

steel to heat treating and finishing the blade, with tips and tricks 

for knifemakers of all skill levels. About the Author: Mastersmith 

Wayne Goddard is an icon in the field of knifemaking. As a fulltime 

maker, teacher and writer, Goddard works as hard to teach 

knifemaking skills as he does to acquire them. His affiliation with 

BLADE Magazine has brought new and interesting information, tips 

and tricks to thousands of would-be knifemakers. 

Knife Making Classes 

We offer periodic bladesmith classes with Ray Rybar in Camp 

Verde, Arizona. Classes are geared toward beginner to intermediate 

skill levels. Blacksmithing experience is recommended. Consider 

taking our beginning blacksmith class first. 

Ray began forging blades in 1972 and joined the American 

Bladesmith Association in 1986. In 2001 he attained the 

coveted status of ABS Master. Ray works almost exclusively 

with patterned steel and enjoys crafting all types of knives. 

His favorites are long bladed and are frequently decorated with 

biblical passages. Ray, a contributor to Blade Magazine and a 

nationally known instructor. 

Take this rare opportunity to learn 

from a true artist and master craftsman! 

Visit Ray’s personal website at www.rybarknives.com. 

Check our Calendar of Events: www.piehtoolco.com 


BLACKSMITHING 

TECHNIQUES & PROJECTS 

BK50 

101 Things You Can Build From 

Horseshoes, Dohrmann 

33 pages, 8-1/2 x 11 (Spiralbound Softcover) 

Easy instructions with lots of ideas to make 

items like a file folder rack, plant stand, towel 

rack, coat hangar, hay feeder camp stool, 

mug tree, shelves, and so much more. 150 

illustrations. 

BK781 

ABCs of Blacksmithing, The: Examples, 

Step-by-Step, Wolf 


Translated from the German version with updated 

information and tips! Clear explanations as well 

as the detailed photos and drawings. This is an 

excellent step-by-step approach for the beginner 

and provides the expert with new and different ideas on how to 

approach the projects. 532 photos and drawings. 

BK157 

Art of Blacksmithing, The, Bealer 

428 pages, 8-1/2 x 5-1/2 (Hard cover) 

A beginners book that shows how many household 

items, as well as, knives, horseshoes, iron grills, rifle 

barrels, barrel hoops, and much more were made. 

There is also some information on the makings of arms 

and armor. This is a great guide for the restoration 

enthusiast. 

BK973 

Art of Mechanical Drawing, The, 

A Practical Course for Drafting and Design, Willard 


Better understand the basic, elegant elements of 

architecture by learning the classic art of hand 

drafting in this step-by-step guide; originally 

published by Popular Mechanics in 1912. 


BK721 

The Artist Blacksmith: Design and 

Techniques, Parkinson 


The essential handbook for anyone interested in 

bringing a creative, contemporary approach to this 

ancient craft, and for those already hooked who 

want to improve and expand their skills. Topics 

covered include: the range and use of tools and 

materials; fundamental blacksmithing processes; working at the 

anvil, drawing down, bending, upsetting and spreading, hot cutting, 

punching, and finally, twisting and joining. Illustrated with over 

200 diagrams and photographs, Provides an introduction to the 

beginner and valuable information for the more experienced smith 

looking to expand their workshop. 

BOOKS BLACKSMITHING - TECHNIQUES & PROJECTS 

BK763 

Backyard Blacksmith, The, Sims 

184 pages, 8 x 10 (Paperback) 

Lorelei takes the mystery out of blacksmithing, 

but not the magic. Detailed step-by-step full 

color exercises teach all the universal skills and 

techniques used to forge iron; it’s like having a 

master blacksmith by your side. Over 20 beautiful 

and functional projects organized by difficulty level allow new 

blacksmiths to progress at their own pace and master the skills they 

learned in earlier chapters. 250 photos/illustrations. 

BK181 

Basic Blacksmithing, Harries and Heer 

127 pages, 6-3/4 x 9-5/8 (Softcover) 

Excellent modern book, showing how to make 

blacksmithing tools, and then how to use them 

to make other tools, such as a sickle, saw etc., 

as well as how to set up a workshop. This book's 

strength is the use of drawings rather than text 

and, being aimed at aid workers in the Third World, it is an excellent 

beginner's manual. Some of the materials and processes shown 

are unusual but the information is very good. Heavily illustrated. 

BK186 

Beginning Blacksmithing: One 

Mississippi Journeyman's View, Heath 


This is one of Heaths great books. It contains 

everything for beginning blacksmithing, as well 

as, some wonderful projects like crafting a Kentucky 

long rifle. A great book that is down to earth 

and is hand bound. Heath teaches the basics of 

blacksmithing, forging techniques, hardening and heat treatment, 

leather bellows construction, simple instructions on how to forge 

weld, and the history of iron smelting. Thousands of illustrations. 

BK184 

Bent Ironwork, Hasluck 


Reprint of Hasluck's 1902 book. This book focuses 

on bending and working strip iron, using only 

an anvil, hammer and pliers to help create floral 

arrangements, hall lanterns, table lamps and much 

more. Includes 269 line drawings. 

BK734 

A Blacksmith Craft: The Legacy of 

Francis Whitaker, Vol. 1, Dixon 


This is a revision and expansion sequel to “The 

Blacksmith Cook Book” by Francis Whitaker. It starts 

with discussion on lighting a coal fire and expands 

from there. The book contains a helpful index. The 

Blacksmith Craft is a “must have” for blacksmiths 

of all levels of expertise! Step by step drawings & tool explanations 

make this book unique! 800 photos & drawings. 

Have you considered taking an artistic blacksmithing class at Pieh Tool? 

Check out our ad at the beginning of this catalog or you can get more information from our website. 

www.piehtoolco.com. 



BK723 

The Blacksmith, Ironworker and Farrier, 

Watson 


The roles of the blacksmith as hardware 

maker, farrier, and village handyman are vividly 

portrayed in the lively text and exceptional 

illustrations. Methods of fullering, upsetting, and 

welding wrought iron are clearly explained; as 

well as, the construction of latches, ice tongs, chains, and a wealth 

of iron fittings. For those who would like a forge and bellows of 

their own, there are designs for laying out a blacksmith shop and 

constructing a leather bellows and forge. Illustrated. 

BK202 

Blacksmith Shop and Iron Forging, Lindsay 


A beginner’s book on the basics of forging that 

contains many subjects ranging from tools to 

techniques. It leads the reader through some more 

advanced techniques of forge-welding pipe, hooks 

and more. 

BK806 

Blacksmithing-Basics for the 

Homestead, Brack 


Joe DeLaRonde, a master blacksmith, 

started his blacksmithing career 35 years 

ago as an apprentice under a master German 

blacksmith. His works are in use around the 

globe by military personnel and living history 

enthusiasts, as well as in private collections and museums in the 

United States, Canada, Mexico, and Europe. Through detailed but 

easy-to-understand instructions, illustrations, and photographs, he 

teaches the basic skills of forging. Here is all the information you 

need to create artistic yet functional iron hardware and implements 

for home or ranch, including: pokers, shovels, tongs, hooks, camp 

sets, forks, spoons/spatulas, skewers, nails, hinges, latches, 

drawer pulls, coat hooks, towel bars, candle holders, brooms, 

hoes, crowbars, awls, screwdrivers, chain links, chisels, hammers, 

adzes, axes and knives. He teaches the basic skills of forging. 

DeLaRonde continues to work in his shop in Mancos, Colorado, 

producing some of the finest tomahawks, axes, and knives 

available on the market today. 305 illustrations. 

BK590 

Blacksmithing for Beginners, Moore 


James Moore shares his 25 years of experience 

as a teacher in this book. From the basics, such 

as shop layout, to detailed forging operations. 

Also gives a short history of blacksmithing. Easyto-follow 

directions. 

See page 56 & 57. 

BK967 

Blacksmithing - Hot Techniques & 

Striking Projects, Ares 


Blacksmithing explains all the basics of applying 

high heat to steel and then hammering or 

pressing the metal into interesting shapes. It 

covers classic skills - like punching and twisting 

- as well as contemporary techniques - such as 

plasma cutting, heating with a torch, and using electric tools. It 

contains an over view of materials (such as various forms of steel) 

as well as essential tools. You can learn to master such techniques 

as creating a right-angle bend, forming a point, and making scrolls. 

You’ll also learn how to craft nails, fasteners, and brackets. Then 

choose from ten beginner-friendly projects, including a simple 

trivet, a door knocker, a coat rack, and a handsome weather vane. 

Over 400 illustrations. 

BK182 

Blacksmithing Instructors’ Guide, Harries 


This book is designed to help skilled blacksmiths 

who have little or no teaching experience to train 

others in forge-work techniques, using easily 

obtainable equipment and scrap metal to produce 

tools such as hoes, sickles, hammers and axes. 

BK206 

A Blacksmithing Primer, McDaniel 


A step-by-step guide to basic and intermediate 

blacksmithing. Includes over 20 projects and 

chapters that include setting up a shop, forging 

and heat treating tools, forge welding, plans to 

make your own coal forge and anvil, and more. 

Over 400 line drawings. 

BK995 

Blacksmithing Projects, Blandford 


Projects for novices and experts include door 

latches, garden tools, tables, fences, weather 

vanes, and more. A book of ideas and suggestions, 

rather than an instruction manual, this volume 

features 80 figures and includes lists of materials, 

step-by-step instructions, and suggestions for 

variations in design. Reprint of ‘24 Blacksmithing Projects’. B&W 


BK225 

Blacksmiths Craft, The, McRaven 


Charles McRaven, a master blacksmith, guides 

you step-by-step through the process of building 

a simple forge from recycled materials, acquiring 

or crafting the basic tools, and learning the 

techniques to get you started in blacksmithing. 

McRaven, who began smithing out of a desire to make his own 

tools for building and restoring hewn-log homes, demonstrates 

his simple methods in easy-to-follow photos throughout this book. 

Working under his tutelage, you’ll find yourself encouraged and 

confident that you, too, can create items of lasting beauty and 

durability from iron and steel. Photographs and illustrations. 


BK959 

Boone Wrought Iron, Plummer 

76 Pages, 8 x 8 (Softcover) 

Daniel Boone the 7th has traced his blacksmithing 

heritage back 15 generations to 16th century 

England. This book is a tribute to his (and Judy’s) 

success as a full time professional blacksmith; 

this after having a long career as a welder. The 

book includes a brief bio, pictures of his shop 

and craft fair booth and a discussion on how he approaches the business 

of selling ironwork. This is followed by 6 chapters featuring the different 

types of ironwork he makes and sells. Along with the pictures there are brief 

sidebars which speak to various technical aspects involved in making the 

piece. Photographed by Nick Vincent, Edited by Judy Boone. 85 photos. 

BK757 

Classical Techniques of Hand 

Forged Iron, Metzger 


Translated into English in 2002 by Rudolf Baum. 

Franz Kuhn & Francis Whitaker both apprenticed 

with Julius Schramm, and were strong 

influences in the revival of the Renaissance. 

Samuel Yellin also looked to earlier periods, and 

worked with the tools, techniques, and traditions 

of the Renaissance. Max Metzger saw the future of the blacksmith 

in this revival, and he supported the name “Artist-Blacksmith” and 

describes the techniques and stresses the necessity of freehand 

drawing employing old traditions in original work. 

BK773 

Classic Wrought Ironwork Patterns 

and Designs, Small 


Forty plates of meticulously rendered designs 

replicate authentic ironwork projects that span 

some 600 years of metalcrafting. Patterns 

selected from English churches, chapels, tombs, 

castles, and other architectural sites depict 

twelfth-century hinges, fifteenth-century grilles and railings, 

and seventeenth-century knockers, handles, latches, and other 

ornamental elements. Ideal for today’s metal crafters looking to 

recreate the decorative architectural accessories from an earlier 

era, these royalty-free patterns will also be of value to artists, 

architects, and designers. Illustrated. 

BK667 

Coal Heat, Schuler and Hull 


If you are looking for alternative heat sources from 

oil, wood, and electricity this book will tell you all 

you need to know about coal heat. Covers types 

and availability of coal, maintenance, conversion of 

furnaces to coal. Sections are devoted specifically to 

the use of coal to heat water, as space heaters and 

in fireplaces. 

BK250 

Complete Modern Blacksmith, Weygers 


This blacksmithing book is a three-in-one of “The 

Modern Blacksmith”, “The Making of Tools”, and 

“The Recycling, Use and Repair of Tools”. This 

volume details correct hammer and body motions, 

forging, creating tools and a variety of other helpful 

advice. Over a thousand detailed line drawings. 


CD795 

Complete Working Guide for the 

Beginning Blacksmith - Blacksmithing 

Fundamentals, A, MacKay 


Heritage blacksmith Don MacKay, was inspired by a 

lack of blacksmithing books dedicated to the beginnerwhere 

important elements are taken for granted 

because they forgot what it was to be a beginner. He stresses the 

importance of using sound ageless techniques without the need for 

modern tools. Covers the Aspects of Blacksmithing, shop set-up, tools, 

building a forge, fuel and design and looks at three shops that predate 

the 20th century. Delves into hammer technique, heating principles, 

forge welding including a new technique of forge welding: the round 

scarf. 21 progressive lessons with photos and articulate descriptive 

step-by-step instructions. References, brings together essential 

information ranging from forge welding flux recipes from the 1800’s, 

tables on metals, etc. Over 100 pictures and diagrams. Also available 

on CD, allowing you to print out pages for separate use. 

BK212 

Decorative and Sculptural Ironwork, 

Meilach 


After a short history of ironwork, Meilach discusses 

the iron working shop, forge and tools, including 

anvils, vises, hammers, tongs, punches, centrifugal 

blowers and machine tools. She presents information 

on building, lighting and maintaining a fire. Forging 

procedures are explicitly shown: drawing out, flattening, bending, 

upsetting, twisting, splitting, punching and drafting, hot cutting on a 

hardy, and joining and finishing techniques. 52 color photos and 727 

B/W photos and drawings. 

BK758 

Descriptive Drawing for Metalwork & 

Workbook for Descriptive Drawing, 

Baum 

2 book set: Bk 1: 48 pages, 

Bk 2: 76 pages, 8-1/2 x 11 (Spiral Softcover) 

Rudolf Baum was head of the metalwork department 

at a state technical school in Hennef, Germany. He 

prepared these books to provide an introduction to 

descriptive drawing for both apprentices and advanced 

artist-blacksmiths. Blacksmithing begins with an 

idea which then becomes a mental picture. This 

must then become a real picture, usually a freehand 

drawing, realistic enough so the experienced 

smith can present it to his customer, and use it as a 

basis for a dimensioned shop drawing. The drawings 

in these books appear to be three-dimensional; the objects look as 

though they could be picked up. The realistic effect is the result of 

simple shading techniques explained in detail in the text, and avoids 

the need for an engineers drawing. 

BK180 

Elementary Forge Practice, Harcourt 


This is a series of excellent line drawings 

illustrating the techniques and methods of the 

metalworker as well as the uses of specialized 

tools for each task. Harcourt has focused on the 

making of tools as a course of study in the use 

of the forge. A modern would-be smith can follow 

Harcourt’s course of study and end up with many of the tools he 

will need to expand upon what was learned. 



BK722 

Farm Blacksmithing: Practical Hints for 

Handy-Men, Drew 


This is a complete guide originally published at the turn 

of the century. Drew begins with the basics, how to set up 

shop, various tools, and selecting materials with which to 

work. There are step-by-step instructions on how to forge 

a wide variety of useful and attractive items. Illustrated. 

BK932 

Forged Architectural Metalwork, 

Parkinson 


A handsomely illustrated guide to forged architectural 

ironwork and the craft of the artist blacksmith. 

Architectural ironwork demands a wide spectrum 

of skills, from making a finely detailed drawing to 

forging heavy, red-hot metal bars. Written by a leading artist blacksmith, 

you will look seriously at design, construction, finishing, and 

installation, and at the skills required of smithworkers in the 

architectural field today. 180 photos, 50 B/W drawings. 

BK774 

Hand Forging and Wrought-Iron 

Ornamental Work, Googerty 


Googerty shows you the basics of blacksmithing 

but then takes you into decorative ironwork. Twelve 

chapters cover introduction, equipment, working at 

the forge, various forms of welding, twisting, scrollwork, 

box forging, embossing, drawer-pulls and hinges, door plates, iron 

lamps and more. You’ll learn to make braided handles, spirals, raised 

forms, rosettes, lamps and many ideas. Some of the constructions are 

very simple that any beginner should be able to do. Well illustrated. 

CD915 

Hot Shop, Chapman 

Book on a CD. 

This CD is the first book in a series but made on a 

disc, is about 25 years at Chapman’s blacksmith shop. 

It features tooling, fixtures, hot tips and notes, knives, 

basement collection and products made without a 

power hammer. He has concentrated on projects that 

are all hand worked and almost no sledge hammer work. 

CD797 

Hot Shop II, Chapman 

Book on a CD. 

The second book now on a disc about shop tooling. 

Step by step forging techniques, fly press stuff and for 

knife makers - two copper handle blacksmith knives. 

Now you can print out projects from your computer so 

you have them right at your anvil! 140 photos. 

BK210 

How to Build a Blacksmith Firepot, Meador 


Meador shows how to build a portable forge out of angle 

iron. By using new parts, the firepot can be built for little 

more than the shipping cost of a small store-bought 

firepot, and for a few dollars more, a rock solid stand 

can be built to hold it. There are a few pages, devoted to 

blacksmith beginners, that describe how to select a fuel, how to control a 

fire, how to read the color of the burning coals, how to calculate the cost 

of a bucket of coal knowing the cost of a ton of coal, and how to make a 

simple coal rake. 31 illustrations. 

BK211 

How to Build a Full Size Coal Forge 

from Commonly Available Metal, Meador 


This book answers one of the most frequently asked 

blacksmithing questions - “Does anyone have plans 

for building a forge?” The coal forge in this book 

uses all new parts which are much easier to come 

by than scrounged parts, and it still will cost considerably less than a 

manufactured forge of equal quality. The project requires simple hand 

tools with the exception of something to cut the angle iron. The design 

uses wheels which are a necessity for weekenders or conferencehoppers. 

Not only do the plans describe the construction, they include 

the plans for making a smoke hood from sheet metal. 

BK582 

How to Forge Weld on a Blacksmith’s 

Anvil For Those Who Have Diligently 

Tried and Failed, Heath 


Well-illustrated volume covers the topic of forge welding 

quite well with easy to understand instructions on 

the use of flux, scarfing to a finished weld, and many 

other topics. Heath covers the details of what to look for in the fire, the 

“wet look” on the iron, how to prepare a fire, and other subtle details that 

must be mastered before a weld can be “pooped”. 

BK583 

How to Make a Blacksmith’s Bellows, 

Heath 


A wonderful how-to book with the entire process of 

making a bellows. Contains over 40 illustrations with 

text to help guide you through the process. Heath 

describes how to make a traditional two chambered 

leather bellows that is about five feet in length. The bellows described 

is one that was disassembled at the Agricultural Museum in Jackson, 

Mississippi and rebuilt. Details how to set one up, how to balance it 

and lever the lower bag. Exact dimensions are provided. 

BK929 

How to Teach Yourself Blacksmithing 

with Clay, Meador 


Sometimes blacksmiths use clay to plan-out how to 

make a tricky piece. It has similar properties to red hot 

metal, but not the heat so if you make a mistake, you just 

reform the clay and start again. 50 Illustrations. 

BK68 

Iron Menagerie, Guild of Metalsmiths 


This excellent project book details how to 

make steer heads, a blue crane, a duck 

head, a wolf head, a ram head, a buffalo 

head, a bear head, a mouse head, an owl, a 

horsehead, a horsehead on a horseshoe, an eagle, a rattlesnake 

and a wizard head. It was written to fill a need for developing 

blacksmithing skills. All projects in this book were hammered out 

by Paul Hubler. Other contributors are Bob and Mary Fredell, 

Marcia McEachron, Pete Stanaitis and Gary Crowther. Created in 

memory of Dave Ferguson, who was in the tool and die business 

for 25 years and loved to work with metal, especially Damascus. 

David had a very strong desire to see the art of blacksmithing 

continue and not be lost to future generations. He studied 

blacksmithing with Paul Hubler at Paul’s smithy in Minnesota. 

Illustrations and B/W photos. 


BK941 

Make Your own Woodworking Tools, 

Burton 


“Metalwork Techniques to Create, Customize, 

and Sharpen in the Home Workshop”. Burton 

details how to make handmade tools fitted to 

individual hands. Extensive information on 

choosing and heat-treating salvaged steel. 

Burton also discusses how to obtain a razor sharp and hard cutting 

edge while maintaining the strength of the metal. Color photos. 

BK241 

Manual of Blacksmithing, Smith 


Originally printed in 1902. This is a wonderful, 

comprehensive guide to blacksmithing. It includes 

many topics not found in other smithing guides such 

as elevation of appliance for rounding bolt head and 

others. Illustrated. 

BK782 

Mastering the Fundamentals of 

Blacksmithing -The Skills of a 

Blacksmith, Vol. I, Aspery 


The Skills of a Blacksmith are a series of 

books that started as course notes for his 

blacksmith school. It is designed to lead the 

blacksmith along a set course of technique 

and understanding. Outstanding step-by-step 

photographs! Packed full of projects, a great glossary, and a 

safety section. 

BK690 

Mastering the Fundamentals of Leaf 

Work - The Skills of a Blacksmith, 

Vol. II, Aspery 


Builds on the skills from his first book. This is 

perhaps the most comprehensive work on organic 

forms. In Vol. I, the basics of the stylized leaf 

and stylized flower are introduced. Mark expands 

on this in volume 2. He shows how to make the necessary tools 

for leaf-making. Ranging from crimping and leafing stakes to 

how to forge your own leafing hammer. He shows the forged and 

formed rose and continues through a multitude of leaves such as 

the Cottonwood and Ginkgo, and the Acanthus Leaf. Covers the 

“stylized bird and split work”. A great tool for anyone wanting to 

get a better grasp on organic forging. 1190 Photographs. 

BK616 

The Mastermyr Find, Arwidsson & Berg 


In 1936 a farmer plowing found his plowshare 

entangled in an old chain that was wrapped 

around a chest that contained many old tools. 

Subsequent investigation by archaeologists 

revealed that it was a tool chest from the Viking 

era of about 10 centuries ago. The blacksmiths and carpenters 

tools were over 1000 years old! The book describes this 

archeological find with clear photographs and drawings. 

NOTE: AVAILABILITY MAY 

CHANGE WITHOUT NOTICE 


BK956 

Metal-Forming, Forging, and 

Soldering Techniques, Ares 


This beautifully illustrated volume will instruct you 

in the art of metal crafting, providing information 

on working with iron, copper, tin and other common 

metals. First, you’ll be introduced to metalworking 

tools and machines. Next, you will learn basic 

techniques for forming and shaping objects, as well as forging, 

welding, brazing, soldering, and finishing. Finally,you’ll be guided 

step-by-step in the construction of several beautiful and useful 

objects, including sculptures, wrought-iron fixtures, trays, tables, and 

other items for inside and outside the home. 

BK183 

Metalworking, Hasluck 


Reprint of the 1907 book. This book contains 

thousands of little tips and helpful information 

including topics like forging, sheet metal, foundry 

work and many more. This is a must have for the 

Blacksmith and hobbyist. 

BK63 

New Edge of the Anvil, Andrews 


The tenet of this book is to provide a tool for artistblacksmiths 

and metalworkers. It tells how to work 

metal: heating it, cutting it, upsetting it, drawing 

it out, twisting it, forge welding it and shaping and 

assembling it. It tells about metallurgy and tool 

making, metal finishes and corrosion. It explains the process of design, 

how to use the computer in metal design, how to set up a business 

and how to manage it. The New Edge of the Anvil is a revised and 

expanded edition of Andrews earlier and most successful book. 

Students are urged to buy, read, use and then reread this book. 

BK759 

Pattern Book for Artist Blacksmiths, Metzger 


Translated into English in 2002, this outsized reference 

shows how to prepare patterns (stencils) for rosettes, 

calyx, leaves, cartouche and scrolls, in Gothic, 

Renaissance, Baroque and Rococo styles. Metzger’s 

exactitude in his drawings detail the beauty and variations 

in design. Spiral bound so that it is easy to lay open on work bench. 

BK596 

Plain and Ornamental Forging, Schwarzkopf 


Reprint of 1930’s original. Designed to help the 

beginner learn the theory and technique of forge 

work, as well as aid the more advanced blacksmith 

with several types of projects. Sections include tool 

smithing and basic exercises and ornamental work. 

Over 175 photographs and illustrations. 

BK158 

Practical Blacksmithing and 

Metalworking, Blandford 


A great introduction into the techniques of 

metalworking and blacksmithing. Provides useful 

information on metal alloys, tools and layout/ 

safety for your shop. This is a very useful learning 

tool for the blacksmith hobbyist. 



BK242 

Professional Smithing, Streeter 


This is one of the very few manuals written by a 

recognized professional smith; in this case, one with 

over 50 years’ experience, whose work appears in 

hundreds of restorations throughout the country. 

Traditional smithing techniques are presented in clear, 

step-by-step text and photographs, enabling the reader to produce highquality, 

hand-forged small ironwork. Included are detailed descriptions of 

workspace layout, specialized tools and techniques, whitesmithing, tool 

making and locksmithing. 

BK825 

Scroll Sawing in Metal: Patterns and 

Techniques, Pozsgai Frank & Mark Downing 

80 Pages, 8-1/2 x 11 (Soft Cover) 

Scrollsawing in metal is simple, and with a few extra 

steps, cutting metal is as enjoyable as cutting wood. 

The results are wonderful and include chandeliers 

and other decorative accessories for the home. 

All is explained in clear, step-by-step instructions, 

illustrated in color photos. In addition the author supplies many patterns 

and a gallery to inspire you. 100+ color photos. 

BK776 

Smiths Work, Hasluck 


Chapters include forges and appliances; hand tools; 

drawing down and upsetting; welding and punching; 

principles of formation; ending and ring making; 

miscellaneous examples of forged work; cranks, model 

work, and die forging, home-made portable forges, and 

manipulating steel at the forge. You will find information on forging 

small links, connecting rods, and even small crankshafts, all done on 

the home forge for use in building model engines. Illustrated. 

BK591 

The Spruce Forge: Manual of 

Locksmithing, Morrison & Frechette 


An instructional book with patterns on how to 

build 6 different blacksmith locks plus basic 

tool making. Great step-by-step guide with 235 


BK993 

Swedish Blacksmithing, Norén, Enander 


English Language. This is the translation of a 

bestselling Swedish book of basic blacksmithing, 

which has been available in Sweden, Denmark 

and Germany since 1998. It is a description 

of how to hand forge, written in the form of a 

dialogue between a master blacksmith and his 

apprentice, combining the dialogue with nearly 400 drawings of the 

process steps and techniques required in blacksmithing. Steel is a 

forgiving material, that lets the smith develop as knowledge is 

gradually built up. But it’s also important to understand the mistakes 

one has made, in order to be able to go back and try it again. Swedish 

Blacksmithing also gives examples of true peak technology, like axe 

making and the latest in damascus, or pattern welding! Some say 

that the book is also entertaining and most maintain that Swedish 

Blacksmithing is the best objective description of how to forge. 

BK832 

Visual Guide to Blacksmithing, Bove 

241 pages, 6 x 9 (Paperback) 

An excellent resource for the beginner blacksmith. 

This heavily illustrated guide begins by offering 

practical tips for setting up your own safe and 

space-efficient shop. Once your shop is ready, the 

Guide uses hundreds of diagrams and detailed 

descriptions to lead you through a variety of 

beginning blacksmithing techniques to forge your first tools and 

complete basic projects and help you to hone your skills by adding 

embellishments and your own individuality and flair to your creations. 

BK969 

Welding Complete Techniques, Project 

Plans & Instructions, Creative Publishing 


The time has never been better to learn to how to 

weld. New tools and equipment are lower in price and 

easier to use. Growing interest in metalworking has 

made supplies easier to come by, with most larger 

building centers now stocking a variety of metals and even types of 

fuels. As interest in welding expands, the number of great plans and 

designs continues to grow. Packed with fresh designs and up-to-date 

information, this new book is your personal metalshop teacher. Inside 

you’ll find everything you need to know to get started welding today. 


BK235 

Work Methods and Tools of the Artist- 

Blacksmith (Werk und Werkzeug Des 

Kuntschmieds), Schmirler 


Text in German, French and English. This book 

contains more than 600 tools and techniques 

used by the artist blacksmith with color-wash 

drawings. Contains information on special 

dies, special splitting tools, decorative punches and more. 224 

photographs, 37 in color, and 65 drawings. 


Measure temperature on hot metal 

in the range of -20 to 932°F. 

This non-contact thermometer gun 

measures the surface temperature. 

Use anywhere, it is fast and easy 

with the laser sighting, just point 

and shoot. 

Read the temperature in the digital 

display. 

See page 67 for further details. 


BLACKSMITHING 

DECORATIVE & SCULPTURAL 

BK991 

Albert Paley Sculpture, Kuspit 


The monumental site-specific metal assemblages 

Albert Paley has created over 

the past three decades place him not only 

in the forefront of contemporary sculpture, 

but also in the vanguard of artists working in 

the new, genre-defying area that has been 

called “Archisculpture”. Paley goes way beyond creating sculptures 

that stand as isolated works of art. His sculptures enhance the 

spaces in which they are placed and, in return, are enhanced by 

those spaces. Noted art historian Donald Kuspit discusses Paley’s 

development as an artist, his virtuosity as a monumental sculptor 

and his diverse and significant achievements. 

BK173 

Alfred Habermann, Elgass 


Alfred Habermann was well known on all 

continents. He has inspired thousands of 

metalsmiths. One finds sculptures and other 

works of his in Europe, America and Asia. 

Alfred developed his own stylistic idiom. Some 

work shown is over 30 years old and yet so 

current in style. Always a border crossers 

between handicraft and art. Text in German and English. 230 

photographs. 

BK604 

Architectural Ironwork, Meilach 


Showcases a vast array of ironwork 

commissioned for new commercial and 

residential building projects. Traditional styles 

in modern settings and designs that reach for 

new visual impact. Over 375 spectacular examples from more than 

100 of today’s top blacksmiths, supplemented with historical works 

from 15 countries. These include doors and hardware, staircases 

and railings, and gates and fences. 

BK975 

Art Deco Ironwork & Sculpture, Cook 

III, Skinner 

208 Pages, 9 x 12 (Hardcover) 

Treasure is brought back to life in this 

fantastic volume of decorative ironwork and 

sculpture. Fantastic photography explores the 

work of artisans of the burgeoning Moderne 

Art movement in Paris. Selected from folio 

volumes published in the mid-1920s to inspire 

fellow artists on the cutting edge, the more than 500 exciting 

pieces shared in this compendium have proven themselves 

timeless in their classic lines and exquisite detailing. This is a 

must-have volume for artisans of the forge, sculpture studios, and 

all fans of Art Deco-era decorative arts. 

BOOKS BLACKSMITHING - DECORATIVE & SCULPTURAL 

BK764 

Art Nouveau Ironwork of Austria and 

Hungary, Santi & Gacher 

240 pages, 8 1/2 x 11 (Hardcover) 

The streets of Budapest, Hungary, and Vienna, 

Austria, are rich in masterpieces of Art Nouveau 

ironwork. Vivid photos show varied interpretations 

of Art Nouveau forms used in balustrades, 

balconies, lanterns, gates, doorways, elevator door facades, and 

more. Explanations of the settings discuss the details and motifs. 

Illustrations and 500 color photos. 

BK916 

Beautiful Iron: The Pursuit of 

Excellence, Whitaker 

192 pages, 9 x 11 (Spiral Hardcover) 

Hundreds of examples of over 75 years’ work of 

Master Blacksmith Francis Whitaker! Each page 

shows a photograph of one piece, along with 

some written description, dimensions and length of 

time of completion. Work includes andirons; door 

hardware; fireplace screens, hoods, and tools; gates and window 

grilles; weathervanes; railings; candlesticks, and much more. 

BK720 

The Blacksmith and His Art, Hawley 


This is the story of blacksmithing, considered 

by many to be the “King of the Crafts”. Smithing 

fathered the metal working industry, which we 

take for granted today. It contains pictures of 

some of the world’s finest iron-art, and shows 

modern day creations, which demonstrate that 

there is still a place for beautiful hand forged art objects in the 

20th Century. It offers aid and inspiration to the growing number 

who are looking for a vehicle of self-expression. Illustrated. 

BK761 

Catching the Fire: Philip Simmons, 

Blacksmith, Lyons 


When he was thirteen years old, Philip Simmons 

caught the blacksmith fever. For seventy years 

he has crafted lumps of metal into beautiful 

ornamental pieces. His gates, fences, and railings decorate the 

city of Charleston, South Carolina. This book is also for young 

readers. Lyons visited with Simmons and others who worked with 

him. She has pulled together not only a compelling portrait of the 

man and his work, but of his journey from great-grandson of slaves 

to nationally renowned artist. Simmons is truly a working person’s 

hero and role model. Catching the Fire presents the landscape of 

his life. 

We offer Wilton Vices, page 43; 

powered tools, electrical and cordless, 

see pages 63 - 73. 



BK954 

Charleston Ironwork-A 

Photographic Study, Bayless 


This photographic essay records the 

rich legacy of the artform, as seen in 

Charleston’s remaining ornamental 

wrought and cast iron examples. The 

photographs are listed by streets, enabling the visitor to use this 

book as a guide while enjoying a stroll around this beautiful historic 

city. Illustrations: 288. 

BK736 

Classic French Wrought Iron: 12th - 

19th Century, Lecoq 


Traces grilles and gates to balconies and complex 

lock and key mechanisms: The successive styles 

of decorative French ironwork over its 700-year 

development. The authoritative work on traditional 

French architectural ironwork designs, from Romanesque to the 

Empire, with masterly black-and-white illustrations and concise 

explanations reveal the complex fabrication techniques and 

elaborate motifs employed by French craftsmen. 

BK213 

The Contemporary Blacksmith, Meilach 


A historical background of ironwork and designs 

rooted in the art noveau and art deco movements. 

Beautifully illustrated architectural ironwork, 

sculpture, furniture and more. Full of color and 

wonderful black and white photographs. 

BK977 

Decorative Architectural 

Ironwork, Featuring Wrought & 

Cast Designs, Stuart 

224 pages, 11 x 8 1/2 (Hardcover) 

Over 600 color photos. One of the world’s 

greatest collections of architectural 

ironwork is on display in the five boroughs 

of New York City. Author and photographer Diana Stuart captures 

the magnitude and impressive array of historic exterior designs 

in 400 color photographs, with background information and the 

location of each piece included in captions. You will see iron 

fences, gates, newel posts, balustrades, railings, brackets, lamps, 

and much more. These stunning artifacts play a major role in the 

fabric of New York City’s streetscape, and artists, designers, and 

ironworkers will all be inspired by the rich selection of designs 

found here. This book also serves as an historical record of the 

amazing wrought ironwork to be found in this amazing outdoor 

museum -- New York City. 

BK671 

Decorative Ironwork of Italy, Pedrini 

487 b/w photos, 320 pages, 9 x 12 (Hardcover) 

Beautiful hand-wrought iron gates, grilles, 

architectural details, and fireplace equipment 

feature scrollwork and floral embellishments, from 

many ancient towns in Italy. Medieval and rococo 

elements are plentiful. 487 full-page, black and 

white photographs illuminate details that will inspire blacksmiths 

and designers today. The original locations of the ironwork are 

identified in the text. 

BK788 

Early American Wrought Iron: 3 

Volumes in One, Sonn 


Albert Sonn (1867-1936) originally published 

Early American Wrought Iron in 1928. There were 

so many requests that it was finally reprinted in 

2007. It is a massive book of over 750 pages and 

3000 drawings! It is actually three volumes now 

combined into one, which explains its rather expensive price. It 

is a celebration of the Village Blacksmith. Often referred to as 

the ‘Bible of Colonial Hardware’. Albert Sonn, draftsman and 

artist, spent 8-1/2 years traveling the East Coast sketching items 

for these volumes. He traveled to museums, sought out private 

collections at residences and visited numerous antique stores. 

Covers the history of blacksmithing, early American blacksmiths, 

wrought iron door hardware (knockers and knocker latches), 

thumb latches of all types and the development of bars and lifts, 

door locks, early American wrought iron hinges of all types, hasps, 

bolts, and doors. Conestoga wagon hardware, chest hardware, 

gate hardware, balconies and railings, newels, gateways, grilles, 

signs, brackets, weather vanes, wall anchors, gutter supports, foot 

scrapers, shutter hardware, household lighting, etc. Each page 

is filled with descriptions of the items, where they were found or 

made originally, and dated. It was reprinted on semi-gloss paper 

taking into account how dirty blacksmiths hands can be. The cover 

can even be wiped. It’s a great resource for both blacksmiths and 

architects. A great way to show customers the various choices 

they have when selecting wrought iron hardware. 

BK827 

Edgar Brandt: Art Deco Ironwork, 

Kahr 

240 Pages, 9 x 12, 306 photos (Hardcover) 

A premier metalsmith in the early 20th century 

in France, Edgar Brandt (1880-1960) designed 

and fabricated some of the most beautiful 

architectural and decorative ironwork of his 

age. This elegant book recounts his life and 

work with scholarly text and photographs. 

Lyrical gates, doors, and tables, including his most famous screen, 

L’Oasis, appeared at the seminal 1925 Exposition des Arts Décoratifs, 

in Paris, which gave the name Art Deco to the new style of 

designs. Combining motifs from ancient Egypt and classical Greek 

sources, floral and animals forms, and machine-inspired geometric 

designs, Brandt created items that became synonymous with the 

most lavish designs of the time. His workshop and showroom in 

Paris, along with a gallery that featured works by other contemporary 

artist-craftsmen, produced luxury goods and private commissions. 

Grilles, fire screens, doors, tables, andirons, vessels and 

lighting devices were exquisitely executed, and appear here to be 

studied and compared. Historians and art collectors interested in 

this fascinating period will find this book an invaluable reference. 

BK709 

Feuer und Stahl, Hephaistos 

Hamburg Exhibition Catalogue 


The catalog covering the first IFGS (International 

Professional Association of Artist Blacksmiths- 

Germany) exhibition in 1993 called “fire and 

steel” in Hamburg. Complete your collection. 


BK732 

Fireplace Accessories, Meilach 


Here is the first book that focuses on unique 

custom-made fireplace accessories as works of 

art by talented modern artist blacksmiths. Over 

400 ideas for unusual fireplace designs reflect 

historical styles from Renaissance to Post- 

Modern. You will be amazed at the infinite effects 

that can be wrought from a bar of metal between the hammers 

and anvils of more than 100 master artist blacksmiths from nine 

countries. You’ll learn to appreciate the forms that are used, from 

scrolls to carved animals, and to recognize their texturing, unusual 

handles and hinges, supports, and more. Fire screens, hoods, 

doors, andirons, grates, tongs, pokers, shovels, brooms, and 

their stands emerge as significant decorative items in today’s 

homes. This is also a wonderful sourcebook for homeowners and 

designers seeking original art for their homes. You will marvel at 

the artistry, variety, and craftsmanship. 362 color & 55 b/w photos. 

BK981 

Found Object Art, Spencer 


Inside are hundreds of examples showing trash 

transformed into fascinating sculpture, collages, 

furniture, jewelry, and clothing - some items 

functional, some not. Meet the artists who count 

themselves among an exclusive club of dumpster 

divers and garbage pickers from all over the 

United States. And watch as other people’s junk finds new life as 

treasure. This book and the innovative artisans inside, will profoundly 

influence the way you view life and its everyday detritus. 

BK982 

Found Object Art 2, Skinner 


From once-cast-aside items, these artists have 

carefully crafted fine jewelry to experiential gallery 

installations. This book takes you on an exciting tour 

through their imaginations. Experience the found 

object movement touted by artists and groups. 83 

artists from across the United States and Europe 

are represented in 487 original artworks. Many of them make their 

work a poignant environmental message, some uncover treasure and 

transcendent beauty, and still others set out simply to evoke a smile. 

This is a delightful treasury of one-of-a-kind artworks that you’ll want 

to study and be inspired by time and again. A listing of galleries that 

represent the artists shown is included. 

BK942 

From Fire to Form: Sculpture 

from the Modern Blacksmith and 

Metalsmith, Clarke 

256 pages, 11 x 8-1/2 (Hardcover) 

Striking color photos display artworks 

produced by today’s leading blacksmiths and 

metalsmiths. Revealed here are beautiful 

sculptures, created by long-established and new artists, and destined 

for individual homes, public parks, and other outdoor venues. Includes 

works by John Medwedeff, Nathan Blank, Tony Higdon, Erika Strecker, 

and Zachary Noble. Ornamental vases, bowls, plates, and containers 

as well as functional gates, rails, furniture, and lighting are also 

included. Both images and text showcase work that may be traditional 

or groundbreaking in technique, but always in an artistic context. Artists, 

collectors, gallery owners, museum curators, and those with a burning 

passion for metal arts, will discover magnificent sculptures by today’s 

blacksmiths and metalsmiths. 521 photos and index. 


BK983 *S/O 

George Rickey, The Early Works, 

Davidson III 


Rickey’s fascinating sculptural oeuvre spans a fiftythree-year 

period (1949-2002) and is incredibly diverse. 

This book is concerned exclusively with the early 

indoor sculptures from the first twenty-five years of 

Rickey’s output. With over 380 photos covering the 

artist’s early innovations, we get an intimate and more complete picture 

of his artistic diversity than ever before. This book lays a firm foundation to 

an understanding of the artist’s creative intentions, and carefully categorizes 

the works into 35 chapters. Many of the works are published here for 

the first time. 

BK710 

Gestaltetes Metall: 

Gitter-Tore-Türen, Hephaistos 


Written in German. The catalogue covering 

the 5th IFGS (International Professional 

Association of Artist Blacksmiths-Germany) 

exhibition at Stolberg in 2001. The catalogue 

contains photos of all exhibits and descriptions (lattice, gates, 

doors; master pieces and journeyman pieces) as well as pictures of 

the participants. 

BK777 

Heritage in Iron, A, Routson 


Over 200 full-color and historical photos 

Documents the history of two ranch restoration 

projects, the blacksmith work, and the 

individuals who forged the hinges, latches, 

and other ironwork installed on the ranches. 

Generously illustrated with meticulous mechanical drawings and graceful 

pencil sketches show the work that went into planning and designing the 

authentic barns, out buildings, and hardware of the two ranches including 

Dashwood House, the ranch headquarters. The purpose of the book is to 

honor the blacksmiths, designers, and builders of the Double Shoe Cattle 

Company and to celebrate the Western lifestyle. 

BK100 

Home Design Details series, 

Architectural Hardware, Berry 


Ideas, Inspiration, and Practical Advice for Adding 

Handles, Hinges, Knobs, and Pulls to Your 

Home. With the increased focus on building 

and renovation over the past decade, there has 

been a growing demand for hardware that is both 

beautiful and functional. Magazines and DIY shows 

have touted the importance of updating hardware and now even famous 

designers are marketing their own door pulls, but with so many options 

home owners often don’t know where to begin. This book focuses on all 

aspects of incorporating architectural hardware into the home -- history, 

styles, finishes, tips from the pros, how-to projects as well as room-byroom 

hardware design. In addition to a complete discussion of every 

facet of decorative hardware components for the home, it also provides 

useful information on what to look for when shopping for hardware, such 

as hardware grades, safety codes to consider, security, as well as basic 

step-by-step installations instructions and room-by-room design tips from 

top designers, builders and architects. 



BK933 

Ironwork: Dynamic Details, Meilach 


An exceptional insight into organic styled ironwork 

created by today’s artist-blacksmiths. Photographs 

display details of flowers, grape clusters, 

leaves, small and large animals that attest to the 

blacksmith’s role as a sculptor. There are amazing 

scrolls, folds, twists, textures, and weaves not 

normally associated with the hard material. She shows how 

focusing on the iron details of flowers, leaves, and amazing critters 

makes ordinary fences, gates, and chandeliers extraordinary. 

Functional joints become beautiful elements on items we use daily. 

251 photos. This was Dona’s final book. We will all miss her! 

BK931 

Ironwork Today; Inside & Out, 

Meilach 


The color photographs highlight objects for 

indoor and outdoor use, including fences, 

railings, gates, doors, sculpture, furniture, 

lighting fixtures, candleholders, and more. Some are truly “modern” 

in style while others are inspired by historical references, such as 

Art Nouveau, Art Deco, Craftsman, and Victorian styles. Here is an 

exciting foray into the world of the artist-blacksmith. 482 photos 

and illustrations. 

BK805 

Ironwork Today 2, Snyder 


Hundreds of beautiful color photos display the 

varied, impressive iron artwork from today’s 

artist-blacksmiths. See a variety of styles, 

from Modern to Victorian, in original works 

for homes, offices, and public spaces. This metal art ranges in scope 

from massive public monuments to small, everyday objects and 

includes sculpture, gates, railings, furniture, lighting fixtures ranging 

from chandeliers to lamps and candleholders, doors, locks, and more. 

Concise text introduces each artist and their work. This book is the 

second in a series pioneered by the late Dona Meilach and provides 

readers familiar with her work with a new look at some of the artists 

they have come to know as well as an introduction to artists not 

previously known. This book will quickly become a prized possession, 

critical reference, and inspiration for homeowners, designers, artists, 

and blacksmiths alike. 500 Color Photos. 

BK821 

Ironwork Today 3: Inside and Out, 

Snyder 

256 Pages, 11 x 8-1/2 (Hardcover) 

Over 450 vivid color photos provide a 

sweeping overview of the amazing range of 

iron artwork being created by 82 of today’s 

artist-blacksmiths. These works in metal are found in public 

spaces, offices, and homes. They vary in size from small, everyday 

objects to staggering public monuments. The pieces, discussed 

by the artists who made them, include sculpture, gates, railings, 

furniture, lighting fixtures, doors, locks, and much more. This 

book, the third in an ongoing series, has artwork arranged by the 

artist alphabetically, rather than in categories. This allows readers 

to see the full scope of each artist’s work together on adjoining 

pages. Here readers will find some artists whose work they have 

seen in other books in this series; others they are meeting for the 

first time. This book will be a prized reference guide and source of 

inspiration for homeowners, designers, artists, and blacksmiths as 

a fascinating snapshot of current trends in this dynamic, growing 

field of artistic endeavor. Over 460 color photos. 

BK828 

Italian Ironwork Medieval: 

Renaissance: Baroque: Neo Classical 


Italian ironwork from Roman times, through 

Medieval centuries, and up to Neo Classical 

designs of the early nineteenth century comprise 

this collection of 100 photographs from Italian 

sources. They depict trellises, grilles, gates, 

fencing, household lighting, fireplace accoutrements, and door 

hardware that will inspire today’s designers. Their origins in hill 

towns of Italy are recorded for many images. This is authentic 

ironwork for contractors, decorators, and homeowners to enjoy. 

100 B/W images. 

BK713 

Leben und Arbeiten am Wasser, 

Immenstadt, Hephaistos 

65 pages, 8 1/4 x 7 3/4 (Softcover) 

This is “the magazine” to the European sculptors 

and designers and covers their exhibitions. This 

exhibition was in Immenstadt in the Allgäu in 2002. 

The cover shows a large metal sculpture depicting 

life positively as an echo on the water. With an 

abundance of outstanding photos of all issued work, detailed 

information on material and technology as well as detailed portrait 

of all involved metal designers. It delivers a colorful kaleidoscope 

of the styles with representatives of all generations. Full color. 

BK217 

Life Force at the Anvil: The Blacksmith’s 

Art from Africa, Joyce 


This book depicts over 50 unique pieces of African 

forged metal work that was shown at the University 

of North Carolina exhibition during summer of 1998. 

This is a well-illustrated book covering dimensions, 

composition and history, as well as a listing of exhibitors represented. 

BK88 

Lives Shaped by Steel, Zastrow 


Spending time with over 40 outdoor metal artists, 

Nancy visits well-established smiths such as Nole 

Putnam and Randy McDaniel, as well as those 

less we-know, and talks about their art, inspiration, 

and the challenges in doing outdoor metal work. Traveling the East Coast 

from New England to Florida, Nancy shares that indefinable magic the 

artists add to their sites and makes the reader smile. She focuses on how 

ironwork can actually enhance the environment by being a part of it! Over 

400 wonderful color photographs. Excellent! 


BK808 

Masterpieces of 18th Century French 

Ironwork, Contet 


This magnificent display of all 166 plates from 

an extremely rare set of portfolios depicts scores 

of examples of the ironworker’s art, among them 

beautiful gates, balustrades, balcony railings, 

window grilles, church screens, and lantern holders. A superb 

collection of royalty-free images for use by designers, architecture 

enthusiasts, and lovers of antiques. Unabridged reprint of 

Documents de Ferronnerie Ancienne de la Seconde Moitie du XVI-II 

Siecle, Series 1-4. Originally published by F. Contet, Paris, 1908-12. 

BK8 

The Mediterranean House in America, 

Bricker and Nogai 


Inspired by the romance of Italian villas, Spanish farmhouses, 

and Moorish courtyards, the Mediterranean 

Revival style became an archetype for sophisticated 

suburban homes throughout America in the early 

20th century. The characteristic white stucco house, 

roofed with terra-cotta and ornamented with ironwork, decorative tiles, and 

fountains, remains the dominant style for new residences in California, the 

Southwest, and Florida. The Mediterranean house’s longevity is rooted in 

an overall simplicity and an emphasis on the outdoors. Its central courtyard, 

terraces, and loggias provide a fluidity between interiors and exteriors 

equally prized by the architects of ancient Pompeii and groundbreaking 

modernists. Provides the first comprehensive survey of this popular 

style, beautifully illustrated in full-color photographs by Juergen 

Nogai, archival photos, and drawings. Over 200 color photos. 

Metall Design International Books are the yearbook of Hephaistos. 

They are a praiseworthy annual project photographically documenting 

the work of several different master blacksmiths from around the 

world. Each annual has a brief biography of the smiths and a 

large number of beautiful photographs of their work. They contain 

hundreds of high-quality photos. Text in German and English. 


BK172 

Metall Design International, 1999, Elgass 


This is the first publication in the series and has 

numerous examples of modern metal design. This 

edition features 8 masters of the trade: Gustafsson 

(Sweden), Huber (Austria), Komine (Japan), Friedrich 

(Switzerland), Meloun (Czech Republic) and Vogel, 

Nusser and Peters (Germany). 

BK174 



In this edition, some of the best show their best work. 

Included are: Manfred Bredhol, Tom Joyce, Hans 

Tritscher, Alfred Bullemann, Klaus Dommers, Vladamir 

Sokhonevitch, Giovani Zepieri, and Paul Zimmerman. 

BK577 



This edition of Metal Design International tells about 

each artist and his work. Karel Bures, Gabriele Curtolo, 

Herman Gradinger, Achim Kuhn, Serge Marchal, 

Amdreas Rimkus, Anthony Robinson, and Karl Schlect. 

BK700 

Metal Design International, 2002, Elgass 

232 pages. 8-1/4 x 11-3/8 (Hardcover) 

This edition showcases the work of the following 

master smiths: Phil Johnson (Scotland), Risto Immonen 

Finland), Hans-Ueli Baumgartner (Switzerland), Helmut 

Brummer (Germany), Ulrich Schmied (Germany), 

Manfred Bergmeister (Germany), Simon Benetton (Italy). 

BK701 



This yearbook covers the works and biographies of 

9 outstanding European metal artists with German 

with English translations. Peter Elgass opens with a 

commentary about modern design pirates patenting 

the ideas of others. Italian, Claudio Bottero’s original 

ideas and techniques with iron are presented in the annual. Claudio 

demonstrated stretching and upsetting techniques in bowls and sculptures 

after an interesting technique of first cutting patterns into plate. 

531 photos. 

BK724 



This yearbook presents more forge-work and less metal 

design. Martin Breidenbach (D), H. and Y Ishikura 

(J), Paul Margetts (GB), Vladimir Markov (Rus), Daniel 

Miller (the USA), Brian Russell (GB), Arpad Safranek 

(D), Edda Sandstede (D). 

BK702 



Presents seven European Metalsmiths: Paul Elliot 

(Great Britain), Manfred Fattler and Dirk Hoeller 

(Germany), Willem Jonkers III. (the Netherlands) 

Vladimir Pulis (Slowakei), Hannes Turba (Austria) 

and Linas Lesciauskas (Litauen). 

BK762 



Metal designer John Medwedeff is featured and two 

exciting “new-comers”: Adam Stachowicz from Poland and 

Patrick Boutillier de Saint André from France. The family of 

the Austrian Herbert Gahr, of Bischofshofen with his sons 

Stefan and Robert; Peter Vögele, Peter Schmitz and more! 

BK778 


231 pages, 8-1/4 x 11-3/8 (Hardcover) 500+ photos. 

The ninth issue presents the work Albert Paley, 

Terrence Clark, Michael Haase, Lothar Klute, Lars 

Larsson, January Odvarka, Brad Silberberg & 

Torsten Theel. Architects will appreciate this years 

publication since it has an architectural focus. 

We offer power hammers, 

treadle hammers, fly presses 

and their tooling. . . pages 74 - 79. 



BK787 



HEPHAISTOS, tenth edition. The protagonists are 

Manfred Becher, Vladan Behal, Norbert Finke, 

Francisco Gazitua, Roberto Giordani, Paul Kreten, 

and Thijs van de Manakker. Vladan Behal from 

Olomouc presents designs and furnishings such as 

lamps, furniture, and vases. Chilean sculptor Gazitua 

is a downright sensation - his delicate ship sculptures would be worthy 

of their own book! Becher shows his development from baroque crosses 

to sophisticated architectural steel structures. Kreten’s has defined 

traditional metal design in modern structures from Trier to Luxembourg. 

Giordani’s Italian forged expeditions constantly lead to new forms 

inspired by the light space in and around his sculptures. Finke makes 

railings, fences, gates, figures, sacral works and modern monuments in 

addition to steel, stainless steel, and bronze sculptures. 500+ photos. 

BK810 



German and English, 500+ color photos. This 

eleventh volume of HEPHAISTOS features the work 

of 8 internationally artists. The high point is the first 

extensive presentation of the breath-taking work of 

Yuri Sarkisian. Young Australian Robert Everingham’s 

work is displayed, Walter Cutter from Schmallenberg and Robert 

Götzer from Switzerland, who presents large apartment areas and 

sculptures. Architecturul accessories inspired by floral motives are 

shown throughout. The work by Italian brothers Jadran and Martino 

Stenico; Alfred, Ivo and Milan Stawaritsch from the Czech republic 

are also featured. 

BK815 



German and English with 500+ color photos. This 

twelfth volume of the HEPHAISTOS features the work 

of Michael Ertlmeier, Ascholding (Germany), Amit 

Har-lev, Sharona (Israel), Günter Matten, Niederroßbach 

(Germany), Erik Vargtand, Stora Skedvi (Sweden), 

Rein Tupker, Soest (Holland), Agnieszka & Ryszard Mazur, Wroclaw 

(Poland), Schorsch Wolf, Habitzheim (Germany). 

BK816 



German and English, more then 500 four color 

photos. The HEPHAISTOS yearbooks have become 

the world´s most comprehensive and unparalleled 

library of contemporary metal design since the 

first issue in 1999. This is the thirteenth volume! 

With accustomed high quality and carefully selected photos “Metall 

Design international 2011” shows the work of eight metal designers 

from five countries. These include Mitsuo Nishida from Japan, the 

Italian Mario Converio, the German designers Hans-Jörg Bender 

and Thomas Schneider, as well as Jiri Bat´a from the Czech 

Republic and Jeff Fetty from the U.S.A. 



BK824 

More Roycroft Art Metal, McConnell 

128 Pages, 6 x 9 (Softcover) As the founding of the 

Roycroft art community in New York State reaches 

its 100th anniversary this year, collector interest in 

the Arts & Crafts-style items that were made there is 

stronger than ever before. Of particular interest are 

the beautiful and varied hammered copper ware the 

“Roycrofters” made. This second volume provides nearly 200 color 

photographs of copper vases, bookends, trays, and more-including 

many rarely-seen items. The history of the group and the evolution 

of its art metal are discussed, along with criteria for evaluating the 

quality of individual pieces. It tells of the Tookay Shop and Avon 

Coppersmith, both spin-offs from the Roycroft community, which 

continued in a similar tradition. A price guide is included. 

BK917 

My Life As An Artist Blacksmith; Whitaker 


The biography of Francis Whitaker as told to Gary 

Mansfield. Francis is a living legend -- he actually 

has been nominated as a “Living Treasure”, under 

a program of the National Endowment for the Arts. 

This book is reminiscences, both fascinating and inspiring, with 

photographs of Francis and his work. 

BK83 

Passion and Power, Zastrow 

416 pages, 8-1/2 x 11, (Hardcover) 

over 800 color photos 

Passion and Power celebrates human imagination, 

determination and sweat. Feel your creativity and 

sense of adventure awaken as you read the stories 

of more than fifty extraordinary artists from the 

American west. Sharing their words and exquisite photographs 

of their unique works, Zastrow chronicles the lives of men and 

women who dedicate themselves to creating fluid forms from 

malleable metal. In your exploration of this exciting, innovative, 

and often challenging branch of the art world you will meet beauty 

and inspiration, served up by perseverance, passion and power. 

Several names of blacksmiths and metal artists are featured in this 

outstanding coffee table book! 

BK203 

Roycroft Art Metal, McConnell 


A complete identification, history and price guide to 

Roycroft art metal such as vases, jewelry, bookends, 

and more. 179 full-color and 32 black and white 

photographs. 

BK820 

Universe of Metal Sculpture, A, Harvey 


Henry Harvey’s delightful and scintillating 

writing style presents his universe of sculpting 

and divulges secrets and tips on everything from 

metalworking tools, the creative process, and life as 

an artists. Join Harvey as he deconstructs and 

teaches how he created sculptures including abstract 

fountains, coffee tables, benches, and organic abstracts. This colorful 

journey through Harvey’s 30-years of sculpting features galleries of 

commissions for presidents, Fortune 500 companies, and private 

collectors, as well as jewelry and outdoor sculptures. 338 color photos. 


PATINAS & FINISHES 

BK976 *S/O 

Bronze Sculpture Casting & Patination, 

Hurst, Russell 

368 Pages, 9 x 12 (Hardcover) 

This magnificent text is paired with 646 color 

photographs and 78 line drawings of the processes 

involved in forming metal sculpture, both contemporary 

and historic examples. 2 techniques used 

to form sculpture castings in metal: the lost wax 

(cire perdu) method, and the modern variant of sand casting are 

described in detail. Metal finishing are well detailed. 114 patination 

recipes developed over 20 years by Rungwe Kindon, director of 

Pangolin, are shared. For a patinator to give away his trade secrets 

is unprecedented. Hurst describes the importance of metal casting 

in art education. An important addition to the libraries of art schools 

and universities, professional and amateur sculptors. 

BK978 

The Colouring, Bronzing and Patination 

of Metals, Hughes & Rowe 


This extraordinary book, the product of Camberwell 

College of Arts in Britain, brings together hundreds 

of recipes and treatments for copper, brass, bronze, 

and silver previously scattered in old books and papers. 

Classified by color and surface finish, metal artists now have 

access to tested and evaluated recipes for a wide range of colored 

finishes. Over 200 color photographs and lucid explanations document 

the results. Problems with techniques are openly discussed. 

If you are a committed bronze artist or crafts person and you want 

to get good patinas you need this book! It boasts over 1000 distinct 

patina formulas and an incredible bibliography. 

Baroque Art Gilders Paste offers a collection of 28 various 

waxes, resins and high concentrations of pigments, for 

resistance to water and common chemical reagents with 

enhanced tint retention and hiding ability for coloring and 

highlighting interior and exterior applications. 

Use Gilders Paste On: 

Metal -- Wrought Iron, Steel, Aluminum, Alloys, etc. 

Wood -- Moldings, Railings, Furniture, Gilding 

Restoration, Picture Frames, Miter Joints, etc. 

Ceramics -- Planters, Terra Cotta, etc. 

Resin -- Castings, Plastic, etc. 

Wax -- Candles, etc. 

Other Applications -- Antique Restoration, 

Crafts, Bisque Ware, Home Décor, Stone, 

Stenciling, Paper, Leather, Textiles, Gourds... 

BOOKS PATINAS & FINISHES 

BK997 Finishing: Methods of Work 

(Wood), Richey 

240 Pages, (Paperback) 

All the best techniques for completing a wide 

variety of projects. How to select and apply 

finishes, which tools to use to achieve desired 

effects, how to color wood, and how to repair 

damaged finishes. The best tips from the “Methods 

of Work” column in Fine Woodworking over the past 

25 years. 175 drawings 

BK170 

Japanese Patinas, Sugimori 

110 pages, 6 x 9 (Concealed Wiro-Hardcover) 

Ancient Japanese patina techniques & recipes 

brought to the West for the first time. Detailed 

information on chemicals and techniques make 

this a studio-based reference, complemented by 

photographs of work from artists in the USA and 

Japan. Covers both non-ferrous and ferrous applications. Clear 

instructions and explanations. 75 full color illustrations. 

BK200 

Patinas for Small Studios, Lewton-Brain 

34 pages, 8-1/2 x 11-1/4 (Softbound) 

Describes safer, easy patination methods for 

metals that involve easily obtainable, and even 

from the kitchen, chemicals to produce blues, 

greens, browns, blacks, greys and reddish tones 

on metals. Cupric nitrat patination, which gives 

a wide range of controllable green, blue, black 

and brown color options is extensively discussed. Paint types 

which emulate patinas are mentioned. Application methods and 

options for pattern and surface control are described. 

Patinas 


Renaissance Wax & Bees Wax 

Stains & Dyes 

See page 60. 

A rosette candle holder base 

done by a student in our 

blacksmithing class. It can be 

enhanced using metal finishes. 


BOOKS FOUNDRY/METALLURGY 

FOUNDRY/METALLURGY 

BK531 

Babbitt Bearing Techniques, Machinery 

Magazine 


The writer has found after long experience that 

neither holes nor undercut grooves are necessary, 

and that plain grooves turned when the bearings are 

bored are sufficient if proper precautions are taken 

it the preparatory tinning of the bearings. In this book you will 

find selected articles from early issues of machinery magazine 

revealing secrets of manufacturing. 

BK279 

Babbitting Manual, Carbonite Metal Company 

8 pages, 8-1/2 x 11 (Photo Copy Pamphlet) 

Step by step details for the rebabbitting bearing process, the 

equipment necessary, the selection of the Babbitt metals, tinning 

and pouring temperature of Babbitt, recommended chamfers and 

much more. 

BK735 

Brass and Alloy Founding, Maynard 


An expanded and improved version of the 

“Brass Founding” booklet we had offered. Many 

of the same illustrations are repeated, but 

new information and illustrations are provided. 

Details on metals and molding, copper-zinc 

alloys, copper-tin alloys, aluminum alloys nickel alloys, bearing 

metals (babbitt), brass molding practice, materials for brass molds 

and more. Shows you crucible furnaces, open-flame furnaces, 

electric-arc furnaces, melting practice, brass-foundry crucibles and 

ladles, and more. Details on the furnaces and their design help you 

in developing a furnace for your own use. Illustrated 

BK304 

Building a Gas Fired Crucible Furnace, 

Gingery 


You’ll discover a furnace that uses design principles 

proven through years of use, but now almost 

forgotten. Common materials are used throughout 

and no special skills are required. Costs can also 

be so low as to be considered negligible. Working 

evenings, you can advance the state-of-the-art of you shop by 

leaps and bounds, and significantly increase your enjoyment of 

melting and casting metal. 

BK295 

The Charcoal Foundry, Gingery 


Build a complete working foundry from a 5 gallon pail, 

fire clay and a steel pipe. Will easily melt aluminum 

with grocery store charcoal. Learn molding and 

pouring. 

BK258 

Complete Handbook of Sand Casting, Ammen 


Learn how to set up and build your own foundry. 

Ammen will show you what you need to learn 

about the tools and the ancillary equipment. Great 

foundation for beginners! 

BK833 

Digital Temperature Control for the Blacksmith 

Forge, Potter 


How to design and build a digital temperature controller 

for any gas-fired blacksmith forge. A synopsis of 

efficient operation for the blacksmith gas forge in a 

concise, detailed, easy to understand book. Bring your 

blacksmith shop into the 21st century. Add a simple inexpensive digital 

temperature controller to your gas forge. Save gas! Work bronze without 

fear. Gain control over your forge. With higher gas prices, going 

green by just being able to set your temperature makes this book invaluable! 

Mr. Potter is a professional blacksmith working in Sonoma 

County California. His work is found in houses and businesses in 27 

states. Illustrated with photos. 

BK989 

Handbook for Ironmongers: A Glossary 

of Ferrous Metallurgy Terms: A Voyage 

through the Labyrinth of Steel and Toolmaking 

Strategies and Techniques 2000 BC to 1950 


A Glossary of Ferrous Metallurgy Terms defines 

hundreds of items of interest to blacksmiths, 

historians, and anyone seeking knowledge of 

steel and toolmaking and its history. Topics range from ancient 

metallurgical techniques to later developments in iron and steel 

production in America and modern machines and the biomass-derived 

consumer products and toxic waste that they produce. While it stands 

alone as an important resource, the Glossary is also an invaluable 

component of the Davistown Museum Tools in History series, which 

surveys the history of steel- and toolmaking and relates it to New 

England shipsmiths and edge toolmakers. Information included on 

nanotechnology and nanophase metals and the fact that it has now 

been proven that the famous “Damascus Steel” received its legendary 

cutting power from the inclusion of molecular fullerene nanotube and 

buckyball structures wrapped into the iron matrix. 

BK273 

Hardening, Tempering and Heat 

Treatment, Cain 


Cain gives explanations on the composition of 

steel, its additives, and the effects of different 

temperatures on its constituents. You will 

understand what changes occur in the metal and 

the care that is needed in following the practical 

processes, which will lead to better and more consistent results. 

Flame, salt bath and furnace heating are detailed, with information 

on accurate measurement or recognition of temperature levels. 

BK403 

Hardening, Tempering, Annealing and 

Forging of Steel, Woodworth 


The secrets of tempering and hardening of steel were 

once closely guarded secrets on which the security 

of nations rested. Today, that information can be 

readily obtained by consulting this comprehensive and 

extremely affordable volume. Covering every aspect 

of its complex subject in great detail, this work covers the chemical 

processes of hardening, addresses the metallurgical properties of iron 

and steel and is filled with superb period engravings to complement the 

text. Whether you are a dedicated blacksmith or an interested layman, 

Woodworth’s book will prove an interesting and frequently consulted 

reference. Reprinted from the 1907 original by Joseph Woodworth. 


BK78 

Heat Treatment, Selection, and 

Application of Tool Steels, Bryson 


An ideal reference for blacksmiths, tool makers, heat 

treaters, and engineers. Provides practical information 

about machinability, shock resistance, and wear, and 

it offers step-by-step “recipes” for properly heating a 

wide range of tool steels. Explains how to lengthen 

tool life, eliminate dangerous practices, avoid metal failure, 

and eliminate costly mistakes. In addition, it includes properties, 

attributes, and qualities of popular tool steels. 

BK611 

How I Pour Babbitt Bearings, Gingery 


Prior to 1940 just about every machine built used 

Babbitt bearings, and every mechanic was familiar 

with them. Today things are quite different. Many 

people get a great deal of satisfaction from restoring 

old tools, machinery and automobiles that are destined 

for the scrap yard. A lot of old, heavily built machinery 

is still available at scrap prices. Often all that is required to put one 

of these machines back in working order is cleaning and painting 

individual parts and re-pouring the Babbitt bearings. This booklet 

contains the basic information you need to melt and pour, in other 

words, restore Babbitt bearings. You look over Vince’s shoulder as 

he restores a sawmill arbor to like-new condition. Babbitt is excellent 

bearing material, and with it you can quickly and easily make low-cost 

custom bearings for those off-the-wall machine tools you plan to build. 

BK278 

How to Cast Small Metal and Rubber Parts, 

Cannon 


Learn to cast any parts made of rubber or metal 

hood ornaments, kitchen utensils, automotive parts, 

etc. Choose the right metal for the job, learn to design 

and make molds, cast in sand, and how to repair 

castings. Includes instructions on core making, repairing 

defects in castings, finishing, grinding, polishing, buffing and more. 

BK290 

Lost-Wax Casting, Feinberg 


Outlines the basic techniques of lost-wax casting 

and describes the equipment needed to carry 

out the process successfully. Explains how the 

equipment can be made, using local labor and 

natural resources readily available in developing 

countries. 

Johnson Heating Furnaces 

The NEW Johnson Ceramic Shell Burn-Out 

Furnace The new Johnson Ceramic Shell Burn-Out 

Furnaces are fast, clean, safe, easy to operate and 

affordable. They are designed for use by artists and 

industry alike for both training and high production 

work at a cost dramatically lower than conventional 

alternatives. Johnson is the first ceramic shell 

burn-out system easily within the grasp of every 

Department of Art and fine arts foundry. 

BOOKS FOUNDRY/METALLURGY 

BK328 

Melting Iron in the Cupola, Hurst 


A great reference for the small foundry. Extremely detailed 

information, formulas, and diagrams regarding all aspects of 

melting iron. It has 11 chapters covering all phases of construction, 

types, maintenance, charging, firing and melting of iron in the 

cupola furnace. 

BK259 

Metalcasting, Ammen 


This detailed and “interesting” book describes, 

in simple terms, every type of metal casting 

technique imaginable. There are plenty of clear 

diagrams explaining everything from how a 

cupola furnace works to pouring clean ingots. 

Packed with step-by-step guidelines for getting 

started and working effectively and efficiently in this time-honored 

craft. You get hands-on advice and cost-cutting tips, plus sound 

ideas for safety and productivity. This guide shows you how to 

use metal crafting tools and processes, casting and mold making, 

molding sands, molding equipment, metal melting, handling, and 

pouring devices, alloys and more. Patination of cast metals, working 

with chemically bonded molds, the newest molding, casting, and 

pattern-making techniques are just a few of what is taught. 

BK5 

Steel Toolmaking Strategies and 

Techniques Before 1870, Brack 


This book explores ancient and early modern 

steel and toolmaking strategies and techniques, 

including those of early Iron Age, Roman, 

medieval, and Renaissance metallurgists and 

toolmakers. Also reviewed are the technological 

innovations of the Industrial Revolution, the contributions of the 

English industrial revolutionaries to the evolution of the factory 

system of mass production with interchangeable parts, and the 

development of bulk steelmaking processes and alloy steel 

technologies in the latter half of the 19th century. It includes 

an extensive bibliography of resources pertaining to steel-and 

toolmaking techniques from the early Bronze Age to the beginning of 

bulk-processed steel production after 1870. Illustrated. 

For more information, 

see pages 88 and 89. 


BOOKS SHOP EQUIPMENT 

SHOP EQUIPMENT 

BK23 

A Blacksmith’s & Hammerman’s 

Emporium, Freund 


Doug Freund presents a collection of rare trade 

literature from 10 prominent manufacturers of 

forging equipment: Buffalo Forge Company, 1887; 

Central Machine Works Company, 1924; Kerrihard 

Company, 1918; Nazel Engineering & Machine Works, 1914; L. 

Philibert-Largeron, 1900; Potts $ Weber, 1891; Schuyler Mfg. Co., 

1925; Star Foundry Company, 1917 and United Hammer Company, 

1917. This wonderful collection is full of valuable information for 

those who want to study the best hammers that have been made in 

history. Full of excellent pictures, drawings, charts or hammer data. 

BK93 

Anvils in America, Postman 

550 pages, 8 1/2 x 11 (Hardcover) 

A great reference and research book for people 

wishing to know more about anvils around the 

world. You will understand more about the anvil 

then your own hot iron. It is an extensive and 

impressive research piece covering how they 

were made, who made them and where. There 

are dozens of old anvil advertisements and hundreds of pictures of 

anvils with explanatory text. Richard defines the 17 distinct parts 

to an anvil. He discusses weights of anvils and how they were 

marked. He also discusses how to date an anvil and the reasons 

for so many anvil patterns and types. Discussion on material and 

manufacturing process are well covered. 

BK332 

Building the Gas Forge and Foundry, Kern 


Enhance your shop and get the versatility you need in 

your forging and casting operations! Includes easy to 

follow step-by-step instructions to build your own gas 

forge. Shows how to bring stock to a welding heat with 

the jet engine flame holder design. The culmination 

of many ideas and practical experience to make a gas forge 

capable of full welding heat. A section of the book is on calculating 

heat for any given forge. Includes references for heat energy and 

gas output. You’ll enjoy building the forge or furnace and then realizing 

you finally have full control offer the heat you need. 

BK731 

Gas Burners for Forges, Furnaces 

& Kilns, Porter 

224 Pages, 8 X 10 (Softcover) 

Explains how to make gas jet ejector burners for 

a forge, a hand torch for metal arts and a crucible 

funace for metals and more. It is a do-it-yourselfer’s 

dream book, showing beginners how to make highly 

efficient gas burners inexpensively. These burners use simple gas 

accelerators as their central operating principle. Also described is a 

blacksmith’s forge that can be carried anywhere and stored under a 

workbench; a portable metal melting furnace; a portable farrier’s forge; 

a portable glass furnace/glory hole; and a mobile hot-work station that 

aids in combining several crafts. The burners and equipment provide 

an inexpensive way to get started in blacksmithing, foundry work, 

ceramics, or glasswork. General information and specific designs are 

given, enabling the craftsperson to build equipment tailored to their 

own desires. All the equipment is constructed from readily available 

materials. It is full of instructions and illustrations and is appropriate 

for beginners. 111 illustrations. 

BK582 

How to Forge Weld on a Blacksmith’s 

Anvil For Those Who Have Diligently 

Tried and Failed, Heath 


Well-illustrated volume covers the topic of forge welding 

quite well with easy to understand instructions on 

the use of flux, scarfing to a finished weld, and many 

other topics. Heath covers the details of what to look for in the fire, the 

“wet look” on the iron, how to prepare a fire, and other subtle details that 

must be mastered before a weld can be “pooped”. 

BK362 

How To Make a Metal-Bending 

Machine, Bob Mann 

Workshop Equipment Manual No. 10n 1987. 


Using simple plans and photographs, this 

booklet describes the construction and assembly 

of this machine. Its main feature is the ability to 

form wheel rims from cold flat mild steel. This 

wheel can be used on farm carts and other 

basic equipment. 

BK350 

How to Run 3-Phase Motors on 

Single-Phase Power, Lindsay 


You can run 3-phase motors on single-phase power 

using any of three methods. You can run a whole 

shop full of 3-phase motors from a single, easy-tobuild 

dynamic converter! No rewinding necessary. 

Methods are good to a least 150 HP and 440 volts. 

Low starting currents and excellent power factor is possible. 

Complete with drawings, diagrams, and capacitor valves. 

BK633 

Little Giant Power hammer, Kern 


The rebuilding, history and use of The Little Giant 

Power Hammer! Kern will guide you through the 

entire restoration process of this popular hammer. 

The result should be a restored hammer which 

will operate properly, not one running on myth and 

prayers. If you are about to buy a power hammer, 

the investment in purchasing this book will be recouped many, 

many times over. You will know what to look for and will have 

some concept of what the restoration will involve. Contains over 

200 tables, charts and illustrations. 

BK630 

Milling Machine Operations, Barritt 


Learn how to use a milling machine, the care of 

arbors, mounting the work, feeds and speeds, 

clearance angles and other essential topics. 

Step-by-step instructions and drawings that will 

teach you how to cut off a brass-packing piece 

and a cold rolled steel plate. Learn to machine 

a brass spacer, a cast iron bearing key, and several cast iron 

brackets. You’ll learn how to cut a tang on a tool-steel spot facing 

bar, mill a machine steel latch pin, steel stud and a variety of shafts. 

Most of the lessons show set ups for the horizontal milling machine. 

Several lessons are designed around using a vertical milling 

machine. Regardless of the type of machine you have, the lessons 

are applicable. You’ll learn how to approach the work so as to ensure 

accuracy and avoid costly mistakes. 


BK798 

Mousehole Forge, Postman, Hatfield 


Mousehole Forge of Sheffield, England was the 

premier anvil maker in the world. After 1860 when 

other English anvil makers were producing anvils, 

Mousehole Forge retained a major share of the 

market, especially in America. This book is the story 

of this small company and their anvils. Color and B&W Illustrations. 

BK312 

Practical Metal Plate Work, Hasluck 


This is a reprint of Paul Hasluck’s book originally 

done by Lindsay Publications. This particular find 

is entirely about working sheet metal and includes 

many topics such as tools and appliances used, 

soldering and brazing, stakes, hammers, and 

so much more that almost any reader would be 

astounded. Well-illustrated with line drawings. 

BK818 

Ready, Set, Weld!, Matin 

128 pages, 9.9 x 8.4 (Paperback) photos 

Beginner-Friendly Projects for 

the Home & Garden 

Welding made effortless! With simple techniques 

targeted to a wide and general audience, this 

guide eliminates the intimidation from an alltoo-often 

technical craft. Rather than creating a manual workbook 

with elaborate, complicated drawings and instructions, Kimberli 

Matin takes readers on a journey of creative discovery. With 

purchased steel rod and bar or found metal parts from a salvage 

yard, plus basic, easy-to-use tools, she shows how to construct 25 

whimsically attractive items. From a garden chair fashioned from 

an old tractor seat and odd parts to a stunning tri-fold screen and 

a delicate, filigreed plant stand, these great projects will make 

welders out of everyone! 

We offer Milwaukee ® 

• Drills, Impact Wrenches 

• Angle Grinders, Buffers 

• Bandsaws, Circular Saws, Sawzalls, Hackzalls 

See pages 63-68 

Real Equipment 

for the Shop 

• Drill Presses 

• Saws & Shears 

• Bench Sanders & Grinders 

• Bender & Sheet Metal Brake, plus more! 

See pages 71-73 

BOOKS SHOP EQUIPMENT 

BK725 

Shop Built Powerhammer, The, Peot 


Complete dimensions, diagrams, photos, materials 

list and plans for building a 50 lb. power hammer 

are provided. Basic dimensions were take from 

the Little Giant 50 lb. power hammer. The power 

hammer discussed is of welded construction and 

is made mostly from material obtained from a scrap steelyard and 

surplus stores. Most material used is new but sold as surplus. It 

could take you three to four months of regular stops to the junk 

yard before your hammer will be turned on. The book is worth 

every penny! B/W illustrations. 

BK742 

Victory Forge, 2 Burner Propane Gas 

Forge Plan Drawing, Williams 

2-sided photocopy, 8-12 x 11 

Victory Forge forge plan drawings. If you 

would rather build your own forge these plans 

will help you. This is only a sketch diagram 

with no instructions. There are captions and 

measurements however. This will be e-mailed to you as a Adobe 

PDF. If you would like it printed and included with the rest of 

your order, please let us know at time of check out. Plans are 

Copyrighted and should not be reproduced without our permission. 

See page 84 for forge. 

Electric Power Tools 


BOOKS RAISING & REPOUSSE 

RAISING & REPOUSSE 

BK984 

500 Metal Vessels, 

Contemporary Explorations of Containment, 

Le Van 


From a fabricated spice box to forged 

teacups and a serving tray on wheels, the 

500 vessels chosen for this lavish color 

survey feature the remarkable design and 

handiwork of a diverse group of contemporary metal artists. This 

beautiful and provocative collection has been crafted from diverse 

materials (including silver, copper, pewter, iron, and gold) using 

various methods (such as soldering, raising, casting, forming, and 

welding). Applied embellishments - such as enamel, chasing, and 

repousse - further enhance many of the pieces. Some of the works 

show the continuation of traditional techniques and classic styles; 

others reflect a cutting-edge approach where sculptural qualities 

take precedence over conventional function; and still others are 

designed solely to stir the mind, soul, and senses. 

BK413 

Art of Coppersmithing, Fuller 

352 pages, 6 x 91/4 (Softcover) 

Written in 1893 by one of the leading practitioners, 

this book has come to be recognized as the classic 

work in its field. All aspects of this important craft 

are covered, from the making of household copper 

goods and ornaments, to copper piping, threeand 

four-way expansion joints and double bends, 

brewery, locomotive and ship installations -- from the 

simplest, to the most complicated and demanding work. Over 474 

illustrations and completely indexed. 

BK585 

Chasing: Ancient Metalworking 

Technique, Lewis 


Using straight-forward text, photographs of work 

by leading artists in the field, and clear, selfexplanatory 

illustrations. Marcia Lewis presents to 

students the equivalent of a specialized workshop 

on the chasing of metal. This book, designed to be 

kept on a workbench right along with the tools of 

chasing, provides students with a constant and invaluable reference 

and review source. 

BK586 

Complete Metalsmith-Professional 

Edition, The, McCreight 

312 pages, 9-1/4 x 7-1/2 (Wiro Hardcover) 

This handsome book replaces the old edition. It 

covers twice the material, and goes into greater 

depth. A rigid fabric cover and elastic band make 

this a place to store sketches and notes; more than 

a book, it’s a practical tool. This volume has practical information 

about various metalsmithing techniques: polishing, hammering, 

chasing, engraving; and covers working with precious metals, 

jewelry making, casting and soldering. Lush and bright drawings. 


Our Repousse Tools 

are on pages 49 and 55. 

BK163 

Copper Candle Cups, Chapman 


This book describes, as well as, shows the tooling 

techniques used for making copper candle cups. 

Definitely a must have for anyone who is interested 

in creating new ideas for iron candle cups. This 

is a timesaver and adds new flavor to basic iron 

candle cups. Over 40 illustrations. 

BK740 

Copper Candle Cups II, Chapman 

16 Pages, 8-1/2 x 11 (Softcover) 

In 2004 Gene began making candle cups 

out of type “K” copper pipe which has a wall 

thickness of 1/16”, double that of type “M” 

pipe. The thicker candle cups are more attractive in my opinion and, 

when handled, have a nice feel to them. They are actually easier to 

forge and produce due to the thicker wall. “Copper Candle Cups II” 

has detailed explanations of methods, techniques and tooling used 

to make candle cups out of the thicker wall type “K” pipe. Note: The 

tooling for thicker wall type “K” pipe has different dimensions than 

those for type “M” pipe. 

BK440 

Copper Work, Rose 


In this book the subject of copper work, as it may be 

introduced into the public schools, is treated to the 

extent of specify an equipment and suggesting some of 

the possibilities of a course. Not only will there be found 

an abundance of illustrative material on this subject, 

consisting of drawings and photographs of various 

objects executed by upper grammar and high school pupils, but also a 

detail description of the process necessary for the execution of many 

of the designs. It is hoped that this volume will be especially helpful to 

teachers in the manual arts that are trying to introduce metal work into 

the regular school course. 

BK972 

Diderot’s 1751 Enclopaedia On Chasing: 

Translation and Notes, Lewton-Brain 


Excellent drawings of many chasing tools as well 

as fascinating drawings of a long-ago chasing 

shop depicting what the artisans are doing. 


BK588 

Direct Metal Sculpture, Meilach 


Revised edition containing all original materials plus 

some new material to update the history of direct metal 

sculpture over the past quarter century. Detailed stepby-step 

photos, as well as, useful information about 

equipment, methods, safety precautions and more. 

Over 475 photographs and illustrations. 

BK617 

Engraving Metals, Hasluck 


Learn about engraver’s tools and their uses, elementary 

exercises in engraving, engraving plate and precious 

metals, engraving monograms, engraving steel for 

transfer processes, engraving name-plates, engraving 

coffin-plates, chasing metals and etching metals. 


BK192 

Expose of Repousse for the Beginning 

Blacksmith, Heath 


In this book Heath easily and understandably 

explains in great detail the art of Repousse. 

Simple, excellent drawings and text will offer 

solutions and ideas. He gives an introduction to 

the repousse’ process in sheet copper. Techniques are presented 

on how to proceed in making belt buckles, jingle bells, body armor 

for an re-enactor, and simple techniques. 

BK239 

Form Emphasis for Metalsmiths, Seppa 


Seppa’s own drawings of ideas and techniques 

are illustrated. He covers formal shells, soldering, 

raising, planishing, layouts, tubing, hinges and 

linkages. He also covers surface enrichment such as 

refinement and finishes. Good detailed coverage! 

BK799 

Formfolding, Lewton-Brain 


Charles Lewton-Brain invented fold-forming, a 

completely new way of forming sheet metal quickly 

into wonderful 3-D shapes and textures, most from 

single sheets of metal without any soldering. Foldforming 

uses sheet material, folds it, works it and then 

unfolds it. Many schools and workshops teach and use fold-forming, and 

thousands of people use parts of the system in their work. The British 

Museum Research Lab and the Rolex Awards for Enterprise, among others 

have certified that Fold-forming is new, and has not been done before 

in the history of metal working. Fold forming is a new system of metal 

forming developed between 1980 and the present which is the concrete 

result of a conceptual approach to metalsmithing that emphasizes forming 

using the metals characteristics. It is about following what the metal likes 

to do. 450+ photos. 

BK964 How to Make a Chain Tool for 

Chasing, Lewton-Brain 

38 Pages, 8.5 x 11 (Softcover), 29 illustrations 

A chain tool is a special class of chasing tool. It is 

a kind of stamp which automatically lines up the 

previous blow in registered rows of rhythmic marks. 

The details of how to make this valuable tool are 

clearly explained. 

BK809 

Making A Copper Weathervane, Helmreich 


Folk art subjects used in American weathervanes 

are shown. Create your own design or use the 

complete set of plans included to produce a 

traditional rooster weathervane. Use basic tools (tin 

snips and hammers), ageless techniques, and sheet 

copper available at your local sheet metal shop 

to make a weathervane that will serve your roof for 

years. Using over 290 crisp color images, 25 detailed line drawings, and 

concise text, Helmreich guides readers through the steps necessary 

to build a hand-hammered copper weathervane. This step-by-step guide 

transforms a sheet of copper into a fully functioning weathervane. 

BOOKS RAISING & REPOUSSE 

BK988 

Metal Corrugation-Surface 

Embellishment and Element 

Formation for the Metalsmith, McAleer 


This book is guaranteed to infuse and inspire you 

with the playful creativity this process has to offer! 

Using a variety of tools and techniques you will 

rapidly be taken beyond any traditional utilitarian 

appearance seen with corrugated material that is 

part of our everyday life. Discover how you can get those waves into 

your metal. Several years in research make this book a must for personal 

expression in metalsmithing and a necessity in your personal library. 

BK204 

Metals Technic: A Collection of Techniques for 

Metalsmiths, McCreight, 


A wonderful collection of articles written by 12 

leaders of the fine metals and jewelry design 

field covering a wide variety of topics such as: 

granulation, reticulation, fold-forming, anticlastic 

raising, toolmakaing and more. Contributors are: John Cogswell, 

Philip Fike, Michael Good, Susan Kingsley, David LaPlantz, Charles 

Lewton-Brain, Tim McCreight, Komelia Okim, Kris Patzlaff, Claire 

Sanford, Mary Ann Scherr, Heikki Seppa. 145 B/W illustrations. 

BK205 

The Metalsmith’s Book of Boxes and Lockets, 

McCreight 


This book is a follow-up to “Fundamentals by 

McCreight” with 288 high-quality photos and 

practical information. In addition to featuring scores 

of exciting boxes by contemporary designers from 

around the world, the book describes dozens of hinges, catches and 

construction techniques in practical detail. Intended for intermediate 

metalsmiths, this book will not only teach you how to make that 

special hinge, but get you excited about what to do with it. 

BK819 

Mexican Arts Series: Hammered 

Copper, Sandy Baum Introduction by Roy 

Skodnick 

160 Pages, 11 x 8 1/2 (Softcover) 

See beautiful hammered copper vessels 

made long ago and today at Santa 

Clara del Cobre, Mexico, a small town in the southwest state of 

Michoacan. From nothing more than a chunk of copper or sheet 

metal, artists here have spent centuries creating both useful and 

decorative copper items, with specially made hand tools and 

machinery. The richness of the work has undergone a marked 

improvement in design, materials, and finish during the second 

half of the twentieth century. Hundreds of copper items from the 

Museo Nacional de Cobre illustrate the art’s evolution. 393 colorful 

photographs, an historical perspective, list and introductions 

to 540 copper artists, and detailed descriptions combine in this 

impressive reference. Be inspired to visit Mexico’s Michoacan state 

and Santa Clara del Cobre, to meet the artists in their workshops. 

Have you considered taking a metalsmith class that we offer at Pieh Tool in Camp Verde, Arizona? 

“The Bill Pieh Resource for Metalwork” 

check our website www.piehtoolco.com or call for details. 


BOOKS RAISING & REPOUSSE, ARMOR 

BK914 

Moving Metal, Adolf Steines 


Translated from German, this book is a long 

overdue treat for jewelers, blacksmiths, sculptors, 

and all artists of metalwork. It has information 

on chasing and repoussé in greater depth and 

detail than any other volume today available in 

the English language. Adolf Steines is clearly a master metalworker 

who enthusiastically demonstrates his creativity, knowledge, skill, 

and experience. The book thoroughly addresses the workroom, tools, 

materials, working surfaces, sinking, raising, stamping, chasing, 

repoussé, engraving, soldering, etching, as well as the coloring and 

protection of metal surfaces. Numerous examples of the author’s 

works are illustrated in large scale doors, fountains, memorials, and 

many delicate jewelry pieces. Clear drawings and quality photographs 

of objects and procedures. 107 photographs, 111 detailed drawings. 

ARMOR 

BK2 

Arms & Armor, Fliegel 

Revised edition: 2008 


Associated with strength, bravery, and loyalty, arms and 

armor have long been decorated with great skill and 

care, thereby becoming artistic creations in their own 

right. The Cleveland Museum of Art’s superb collection 

of arms and armor appears here along with works of art 

from each period that illustrate their use. Chapters include discussions of 

chivalry and the tournament, manufacture and decoration, and weapons as 

technology and art. There is a small section about swords, halberds, etc. If 

you are into armors, this is the book for you! 185 color photos. 

BK950 

Art of Mail Armor, The: How to Make 

Your Own, Brewer & Price 

168 pages, 8 1/2 x 11 (Softcover) 

Laid out in easy steps learn how to assemble your 

tool kit and make your own links, to more complicated 

and intricate patterns that will personalize and tailor 

your mail armor for a perfect fit and custom look. Learn 

how to join, enlarge, round, angle, fit sleeves and add style to an ordinary 

piece with various trims and inlays. Included are 7 different mail patterns, 

including 6-on-2 and double 4-on-1 that can be incorporated into many 

different character costumes. The step-by-step diagrams will have you 

creating your own coifs (head coverings), hauberks (shirts), gauntlets 

(gloves) and bishop’s collars in no time. 450 photos and illustrations. 

BK7 

Fashion and Armour in 

Renaissance Europe 

Proud Looks and Brave Attire, Patterson 

112 pages, 8 1/4 x 9 5/8 (Hardcover) 

Drawing on the Victoria and Albert Museum’s 

popular arms and armor collection -- Patterson 

looks at the suits designed to kill, protect, and 

impress. Here are parade suits, lavishly embossed and gilded, 

decorated with plumes of ostrich feathers, and draped with colorful 

silk sashes, as well as swords, daggers, pistols, and gunpowder 

flasks slung from elaborate belts. Paintings, sculpture, photographs, 

including many close-up details, bring this aspect of Medieval and 

Renaissance fashion to life. 100 color photos. 

BK92 

Nahum Hersom, Repousse, Henderson 

62 pages, 8-1/2 X 11 (Spiralbound Softcover) 

Jerry’s background in Repousse comes from Nahum 

Hersom who offers a Repousse workshop at his shop 

in Boise, Idaho. Documents his workshop and parts 

of his hand written workbook. The German method 

of embossing is what Nahum Hersom teaches; he 

learned his craft from Valentine Goelz. 

BK445 

Tinsmith’s Helper and Pattern Book, The, 

Vosburgh 


This is a reprint of the 1910 revised edition of the classic 

handbook first published in 1879. It contains 53 diagrams 

and patterns covering a wide variety of products and 

layouts, each fully explained. There is also an extensive 

appendix that gives tables, rules, and practical recipes that continue to be 

of great interest to contemporary tinsmiths. A clear concise and practical 

handbook valuable to anyone engaged in tinsmithing. 

BK185 

How to Make a Chain Mail, Heath 


This book explains a more economical way of 

how to make chain mail along with the history of 

how it was used, originally made and its uses. 

The beginner is taught how to make a coat of 

chain mail with detailed drawings of how to 

“weave” the links and a basic lay out of how to make a shirt. 

BK951 

Knights In Shining Armor, Sinkevic 


A lavish exploration of the culture, symbolism 

and craftsmanship of Arms and Armor 

at a time when their artistic and ornamental 

importance, in fine art as much as in the armor 

work itself, was superceding battlefield 

use. Ida Sinkevic is Associate professor of 

Art at Lafayette College, Pennsylvania. She has written a number 

of articles and books on numerous artistic subjects. 

BK148 

Techniques of Medieval Armour Reproduction, 

Price 


Over 1000 black & white pictures, many showing 

the different items Price has made. The photos 

provide step-by-step instruction on how the pieces 

are made. He covers the selection of metal, 

taking measurements, decorative techniques, 

engineering the joints, strapping, mail, padding and hammerwork. 

A chapter covers the work of other modern armourers and projects 

specifically devoted to making a helm, body armour, etc. He has 

been making armour for almost 20 years. 


JEWELRY & PMC 

BK98 

Beaded Chain Mail Jewelry, Whyte 

Timeless Techniques with a Twist 


Chain mail is one of the hottest jewelry trends 

out there; add beads and the style positively 

sizzles. Who could resist? Bestselling author 

and chain mail expert Dylon Whyte presents his 

time-tested, time-saving techniques with more than 30 breathtaking 

projects, ranging from extremely simple to challenging. 

A thorough introduction, illustrated with computer-generated 

pictures, covers the basics of chain mail techniques. Then Whyte 

reveals his patented, perfected beading method: rather than using 

difficult wire-wrapping, he threads the beads directly onto the rings 

before they’re fashioned into chain mail. The exciting collection of 

30 projects includes a delicate Persian patterned anklet, embellished 

with tiny silver bells; an amethyst opera-length necklace; 

and silver earrings shaped like inverted peacock feathers, edged 

with rings and turquoise beads. Illustrated with photos. 

BK952 

Chain Mail Jewelry 

Contemporary Designs from Classic 

Techniques, Taylor, Terry & Whyte, Dylon 


Once used to create protective garments, chain 

mail techniques and patterns have now been 

adapted for jewelry making by innovative artists. 

Making chain mail jewelry needs very few tools to achieve impressive 

results. Thirty extraordinary projects are offered here for all 

skill levels. 484 illustrations. 

BK619 

Fabulous Jewelry from Found Objects, 

Le Van 

160 Pages, 9-1/2 x 8-1/2 (Softcover) photos 

Creative Projects, Simple Techniques 

After exploring the exquisite ideas and 35 projects 

showcased in this one-of-a-kind jewelry collection, 

you’ll never look at “found items” the same way 

again. There are countless suggestions for recycling 

everyday objects, from electrical wire to soda cans, and uncovering their 

vast potential for beauty. Begin by examining various metal types and forms, 

and the techniques for shaping and cold-connecting them. Select from a 

range of surface finishing treatments, and find out about special skills often 

used for working with stones, shells, plastic, wood, and bone. The wildly 

creative pieces include a driftwood brooch, a bracelet with wooden game 

pieces, and a pendant featuring old boat charts. 

BK428 

Hinges and Hinge Based Catches for 

Jewelers and Goldsmiths, Lewton-Brain 


This book analyzes hinges and hinge-like mechanisms 

in a manner never done before in a single 

volume. Along with history, generics, classes of 

hinges, and guiding principles, sections include: 

design, tube making, hinge pins (force-fit, riveted, 

upset, tapered, cotter type, tubing square, 

threaded, stud); hinge types (basic, thick-walled, locket, bracelet, 

box, block, cold-rolled, tab, cast and milled); lubrication, catch 

systems, hidden alternative, cast hinges and solving design problems. 

Good index and table of contents. Over 200 line drawings. 

BOOKS JEWELRY & PMC 

BK619 

Making Metal Beads, Warg 

160 Pages, 10 x 8 (Hardcover) photos 

With this comprehensive skill-building guide at 

hand, jewelers can craft 30 stunning one-of-akind 

beads in shimmering silver, copper, brass, 

and other metals. Metalworking intro provides 

the basics, followed by creative design ideas and 

techniques specific to metal beadwork. Transform commercial beads 

using simple stamping, chasing, and dimpling. Use cold connections 

to produce riveted and woven beads from sheet and wire. Roll a 

simple Crescent Roll Bead, and create variations in the form by using 

patterned, textured, or hammered sheet metal, building a repertoire 

of skills. An extensive gallery of handmade beads provides a wealth 

of inspiration. Warg is currently an Artisan Member of the Society of 

North American Goldsmiths and a member of the Enamelist Society. 

BK813 

Mixed Metals, Hettmansperger 

128 pages, 10 x 8-5/8 (Hardcover) photos 

Hettmansperger combines sheet, clay, mesh, wire 

& more. She was a crafts teacher for 25 years, is an 

author and magazine contributor, PBS show personality 

of Beads, Baubles & Jewels. Her ‘workshop in a 

book’ covers the studio space, equipment, tools, materials. Techniques 

to pierce, cut, forge, solder sheet metal, shape, texture, and working 

with metal clay; the use of cold connections, wirework and patinas are all 

covered. The book includes 20 projects. 

BK971 

Jeweler’s Studio Handbook, The, Holschuh 


The perfect guide through the process of equipping 

your own jewelry studio. It teaches you the 

techniques that will have you creating one-of-a-kind 

metal jewelry in no time. 430 illustrations. 

BK987 

Jeweler’s Directory of Decorative 

Finishes, The, From Enameling and Engraving to 

Inlay and Granulation, McGrath 


A reference for jewelers, designers, students, and anyone 

working with base and precious metals is a complete 

guide to the tools, materials, and techniques for creating beautifully 

decorative finishes for jewelry. Clear step-by-step photographs and instructions 

for key surface and decorative techniques enable you to achieve a 

wide range of spectacular effects. Illustrated samples showing possible 

variations, with practical advice on how to achieve each finish. Includes essential 

safety information. Inspirational showcases of work by professional 

jewelers show how different methods are used to create stunning pieces. 

BK812 

Keum-Boo: Hot Burnished Gold Foil, 

Lewton Brain 

47 pages, 8-1/2 x 11 (Saddle-stitch binding) 

This book teaches how to easily hot burnish gold 

foil permanently onto silver objects and raw sheet 

for soldering and building patterned jewelry with. 

This incredibly simple designing technique was 

re-introduced to the West from Korea in the 1980’s. It lets you 

make pictures and patterns using pure 24k gold foil on other metals 

including steel, platinum, palladium, 14K, 18K and other gold alloys, 

aluminum and even copper. Step-by-step photos show how to make 

your own gold foil. Also discussed are how to calibrate a hot plate and 

use liver of sulfur. The white electrum alloy for keum-boo is described. 


BOOKS JEWELRY & PMC 

BK910 

Metal Clay Beads, Becker-Simon 

144 Pages, 10-1/4 x 8-7/8 (Hardcover) 

When you combine two bestselling topics like metal clay 

and beading, and then add one of the most talented and 

respected artists in the business, you’ve got a winning 

combination. In this unique, comprehensive reference, 

Barbara Becker Simon treats readers to 22 outstanding 

metal clay bead projects. An introductory section guides them 

through all the fundamentals, from forming and joining the clay to firing 

and finishing. Learn how to add gemstones, glass, and other objects; use 

molded and carved texture plates; etch photos into a surface; develop 

rich patinas; and more. From the Porcupine Pearl Bead to a Polygon 

Box Bead, the projects are both timely and sophisticated. 

BK826 

Mexican Jewelry and Metal Art, Pina 

288 Pages, 11-3/4 x 9 (Hard Cover) 

The collectible appeal of Mexican metal art can 

be attributed to artistic quality, variety, and large 

production volume pieces, including wearable 

art, table art, and wall art, with something for 

everyone. See Mexican jewelry and metal art 

made with copper, brass, alpaca, and silver, from glass mosaics on brass 

to silver jewelry inlaid with crushed stone, to metal combinations such 

as metales casados. The variety in color, texture, and form is wonderful. 

While other books have made significant contributions to raising awareness 

of Mexico-designed silver jewelry, little has been written about other 

metal objects, often made by the very same designers, such as Salvador 

Teran, Los Castillos, Miguel Martinez, Miguel Pineda, Estele Popowski, 

and Bernice Goodspeed. Detailed captions accompany 1000+ color photographs. 

Includes a bibliography. 

BK822 

Mexican Silver-20th Century Handwrought 

Jewelry and Metalwork, 

Penny Chittim Morrill & Carole A. Berk 

272 Pages, 8 1/2 x 11 (Hardcover) 

Here is the powerful story of the silver renaissance 

in Mexico from the 1920s to the present. 

The wealth of color photos showcases the 

incomparable beauty of these works in silver. 

Extensive research sheds new light on the life and art of William 

Spratling, Margot van Voorhies, Fred Davis, and Hubert Harmon, 

and on the artisans who worked for them, making this book the 

definitive study of Mexican silver jewelry and decorative objects. 

440 photos 

BK784 

PMC Decade, McCreight, Friedlich, Burks 


It has been ten years since Mitsubishi Materials 

Corporation developed and patented Precious 

Metal Clay. The first decade of PMC has seen 

tremendous growth, not only in the development 

of additional forms of the material, but in the 

innovative ways that artists are using metal clay to create unique 

and exciting works. This high quality presentation book will be the 

first to showcase the best work being done around the world. This is a 

detailed illustrated chronology. Over 250 color photos. 

BK785 

PMC Technic, McCreight 


Every once in a while, dedicated artists and 

students are lucky enough to study with someone 

who had researched and mastered a specific 

technique. Full color, dozens of photos and illustrations. 

Ten leading artists teach their specialty, 

with clarity, care, and passion in this book: Tonya 

Davidson--PMC Syringe; Celie Fago--Making 

Hinges; Jennifer Kahn--PMC Bezels; Doris King--Fusing Sterling 

and PMC; Terry Kovalcik--Developing Form with Slip; Noortje 

Meijerink--PMC on Ceramic; Kelly Russell--Using Stencils with 

PMC; Barbara Simon--Lampworking and PMC; CeCe--WireWater 

Etching on PMC; and J. Fred Woell--Coreless Beads. 

BK1000 

Pure Silver Metal Clay Beads, 

Jewelry Arts Workshop, Kaye-Moses 

160 Pages, 9 x 9 inches (Hardcover) 

Metal clay is an innovative material that combines 

the workability of clay with the beautiful finish 

and durability of precious metals. The material is 

easy to manipulate and shape by hand to make 

beads for bracelets, necklaces, and other jewelry. This book contains 

15 projects for creating fine silver beads and a design gallery of 25 

additional jewelry pieces. Intro chapters include information about tools 

and techniques. Projects are organized workshop-style, to build skills 

cumulatively. Linda Kaye-Moses’s (Dalton, MA) work and articles have 

appeared in Lapidary Journal, Step-by-Step Jewelry, The Crafts Report, 

Metalsmith, Ornament, Art Jewelry, American Craft, American Style, the 

New York Times, and Craft Art International, among others. Her work 

has received several awards. She has also participated in numerous 

juried and invitational shows and is a member of several professional 

organizations, including the American Craft Council and the Society of 

North American Goldsmiths. 190 photos and illustrations. 

BK811 

Setting Stones In Metal Clay, Landenwitch 


Laminated cover, Concealed wire binding 

This is a hardcover, full color book that focuses specifically 

on setting gems. Through photos, illustrations, 

and clear instructions, Jeanette demonstrates more 

than 30 ways to set stones. Traditional bezels to pavé, 

channel setting, and many innovative alternatives are 

discussed. In addition you’ll find inspirational work made by talented 

artists from around the world. 

BK786 

Working with Precious Metal Clay, 

McCreight 

128 pages, 8-1/2 x 11 (Wiro Hardcover) 

Since Precious Metal Clay (PMC) was introduced 

to artists in the US three years ago, thousands of 

jewelers, beadmakers and polymer clay artists have 

discovered its huge potential. Until now the only text 

on the subject has been a translation of a Japanese 

book, but that’s about to change. Tim McCreight, one of the first 

American designers to work with PMC, has created an information-filled 

book suited to beginners and professionals. The first section consists of 

50 projects that teach how to use the material by showing specific 

applications. Use these ideas or modify them to make your own work; 

either way you’ll find a wealth of information on every page. A second 

section includes 25 techniques, while a third part describes 15 tools you 

can make for yourself. This is a must-have book for anyone interested in 

this revolutionary new material. Full color throughout. 300+ drawings. 


DESIGN & STYLE 

BK927 

Art Forms Plant World, Blossfeldt 


Originally intended as a reference for his work as an 

architect, sculptor and teacher. Blossfeldt’s exquisite 

sharp-focus photo studies of plant form-leaves, 

buds, stems, seed pods, tendrils and twigs-won 

acclaim with publication of the 1928 edition of this 

book. This book is extremely helpful to metalsmiths 

who need a close up view to understand the plant life in order to 

reproduce it in metal. 120 B/W photos. 

BK668 

Art Nouveau Typographic Ornaments, 

Solo 


A fabulous resource for black and white ornaments. 

Over 800 Art-Nouveau florals, swirls, women, animals, 

borders, scrolls, wreaths, spots and dingbats, all 

copyright-free. 

BK962 

Karl Blossfeldt - The Alphabet of Plants, 

Mattenklott 


With an Essay by Gert Mattenklott. “Karl Blossfeldt’s 

interest in the plant world was of an artistic and 

didactic nature: he was fascinated by the structure of 

plants, their organic configuration, and their lofty 

artistic form, which he wanted to illustrate and compare in a photographic 

style that could be described as strictly objective, almost graphic. His goal 

was to create a catalogue of forms for the benefit of artists, artisans, and, 

above all, architects, providing them with a book of instruction and 

models to guide them in their designs.” Plant life has for ever had 

a strong influence on blacksmith designs. From these pictures flows 

a forceful stream of inspirations also to the modern blacksmith. Karl 

Blossfeldt has done his part in that great examination of the perceptive 

inventory, which will have an unforeseeable effect on our conception of 

the world...whether we speed up a plant’s growth or show its form in a 

forty-fold enlargement. 44 illustrations. 

BK965 

Karl Blossfeldt - The Complete 

Published Work, Adam 


The plant photography of Karl Blossfeldt. Art forms 

in nature. Blossfeldt was a sculptor, amateur 

photographer, and a professor at Berlin’s school 

of arts and crafts where he taught modeling. The 

photographers in the know have been waiting for 

this book. 239 illustrations. 

Interested in the classes at the 

Bill Pieh Resource for Metalwork? 

Check our calendar for the latest 

events at Pieh Tool. 


BOOKS DESIGN & STYLE 

BK756 

Basics of Style for Artist Blacksmiths, 

Metzger 

144 pages, 8-1/2 x 11 (Softcover-Spiral Bound) 

A classic German blacksmithing text which was 

translated into English in 2002 by Rudolf Baum. 

The teaching style is easy to understand and is 

presented without any material not relevant to 

the smith! It would be considered a success if it 

enabled the smith to identify the period of a style with confidence, 

to copy an object with the particular characteristics of a style, and 

to know the conditions and requirements of a stylistically correct 

design. Until now, all of the published works on style and art history 

are either too general, or too scientifically detailed, often both. 

BK928 

Natural Art Forms, Blossfeldt 


Using innovative techniques, Karl Blossfeldt 

produced arresting images of seed pods, 

buds, stems, and other botanical items. This 

spectacular collection features scores of his 

remarkable photographs of plant life, offering 

artists and crafts people a treasury of royalty-free 

pictures and design inspirations. 120 B/W photos. 

BK480 

Treasury of Flower Designs, Gaber 


100 garden favorites rendered in black-and-white 

line illustrations will suggest numerous design 

and artistic uses to artists, designers, craftsmen, 

and needle workers. Amaryllis, anemone, begonia, 

cinquefoil, peony, snapdragon flow and weave, 

many forming borders and frames. All drawings 

are copyright-free. 

The Bill Pieh Resource for Metalwork is a unique threeseason 

metalworking school located in Camp Verde, Arizona, 

25 miles south of Sedona and one hour north of Phoenix. 

Founded in 2003 by Pieh Tool Company, Inc., the school’s 

mission is to foster interest and knowledge in metalworking 

crafts. These include disciplines such as blacksmithing, bladesmithing, 

and coppersmithing such as raising, sinking, chasing 

& repousse. Workshops are also offered in silversmithing, 

engraving and jewelry. As Arizona’s only notable non-university 

metalworking school, the Bill Pieh Resource for Metalwork 

offers both beginner and advanced artists a variety of 2 and 

3-day courses and several demonstrations taught by some of 

the worlds finest metalsmiths. The programs are expanding and 

are updated on the Pieh Tool website Calendar. The school is 

named in honor of the late Bill Pieh. 

Come learn in an atmosphere of friendship and camaraderie! 

The creative energy and enthusiasm of the instructor provides 

adults and teenagers with unique skills and lasting memories. 


BOOKS TRADES & CRAFTS 

TRADES & CRAFTS 

BK739 

Art of Engraving; A Book of Instructions, Meek 


Complete, authoritative, imaginative and detailed 

introduction and training in the art of gun 

engraving. This is a supremely unique book, 

it simply in layman’s terms tells you how to 

engrave. It does not assume you know anything 

about engraving. Start by learning to draw scrolls 

and layouts, then cut practice plates until you are sure of your 

ability to design a pattern, then transfer it to a gun. Hundreds 

of original engravings, designs and layouts (plus samples from 

other master engravers) to explain specific points and techniques. 

Original work is intended for you to copy and transfer to your own 

guns to create an engraving job of which you can be proud. Over 

1378 images. 

BK97 

Choosing & Using Hand Tools, Rae 

208 Pages, 9-3/4 x 8-1/2 (Paperback) 

This is the essential who, what, when, where, and 

why of hand tools! Not only is the equipment itself 

beautiful, it’s the classic and most pleasurable way to 

work with wood. Hundreds of photographs, 

accompanied by explanatory illustrations, escort 

you through the traditional woodshop, introducing everything from 

indispensable clamps and drills to chisels and saws. And not a 

question goes unanswered in this guide to buying, tuning, sharpening, 

and operating both antique and contemporary pieces: you’ll find out 

which tools you really need, which ones are the best, and how to use 

them most effectively. There’s advice on work surfaces, vises, marking 

and measuring utensils, edgers, and tools that pull, pry, twist, bore, 

and scrape. You’ll discover things you never knew before! Power 

tools are a ubiquitous part of modern woodworking but, for most of 

history, hand tools were the standard. Rae, a professional furniture 

maker who has contributed to and edited a number of woodworking 

magazines, offers a wealth of information about the selection, care, 

and use of nearly every kind of hand tool: vices and workbenches, 

marking and measuring tools, and hammers, screwdrivers, drills, files, 

chisels, planes, and saws. Sharpening instructions are included, and 

each entry is profusely illustrated with color photos. This title will 

prove to be a valuable resource for woodworkers and should be part 

of public library woodcraft collections. 

BK143 

The Cooper and His Trade, Kilby 


Valuable information on coopering by a master 

cooper. This is a great find with historical data on 

the making of barrels, tools and techniques from the 

earliest times up to today. 56 photos, 87 drawings. 

BK957 

Dictionary Of American Hand Tools, 

Sellens 

546 Pages 9 x 12 (Hardcover) 

Here is the greatest assembly of hand tools ever 

assembled. It is a fascinating chronicle of nearly 

every tool ever used in North America, including 

ancient tools used by Native Americans; Trade 

tools used to create coaches, pianos, ships, and 

saddles; tools for harvesting farm goods, turpentine, and ice; and 

tools for fine bookbinding and watch repair. The tools are organized 

according to profession, from Beekeeper to Wheelwright, and will 

fascinate today’s practitioners of these trades and hobbies. Over 

4,500 illustrations. 

BK997 

Finishing: Methods of Work (Wood), Richey 


All the best techniques for completing a wide variety 

of projects. How to select and apply finishes, which 

tools to use to achieve desired effects, how to color 

wood, and how to repair damaged finishes. The 

best tips from the “Methods of Work” column in Fine 

Woodworking over the past 25 years. 175 Drawings. 

BK980 

Formed of Fire, Dunham 


Simply defined, lampwork is the craft of 

shaping glass in a torch flame. In these 

pages feast your eyes upon creations 

by nearly a hundred of today’s best 

lampwork artists, from the United States 

and around the globe. A historical introduction, demonstration 

sequences by featured artists, and a glossary of lampwork 

terminology round out this indispensable guide to lampworked glass. 

BK999 

Gunstock Carving: A Step-by-Step 

Guide to Engraving Rifles and 

Shotguns, Janney 


The specialized art of carving gunstocks is very 

popular with both hunters and crafters. Many 

hunters commission artists to carve an image 

replicating a successful hunt on their gun or 

rifle which is then displayed to commemorate 

their catch. This type of woodcarving can be very lucrative and now 

carvers of all levels can learn this process from start to finish with 

this new book by Bill Janney. He has appeared on PBS’s American 

Woodshop and is a featured demonstrator at Cabela’s, a national 

hunting store. He lives in Middletown, Ohio. Chapter include: Tools 

and Materials, Carving Fish Scales and Oak Leaves, Carving Basket 

Weave and Acanthus Leaves, and Carving a Scene. 

BK131 

Historical Guide to Wagon Hardware 

and Blacksmiths Supplies, Spivey 


This is a great reference to identify pieces and 

parts of wagon hardware and tools. (The cover is 

black with gold lettering) Thousands of really neat 

illustrations of wagon hardware and supplies. 

BK823 

Heintz Art Metal, McConnell 

127 Pages, 8-3/4 x 5-3/4 (Paperback) 

The American Arts and Crafts Movement flourished 

briefly but brilliantly during the early years of the 

20th century. It was during this era that the Heintz Art 

Metal Shop and its successor the Smith Metal Arts 

Company (Silver Crest) produced decorative bronze 

wares of the highest quality. Today’s avid interest in 

Arts and Crafts furnishings and accessories has collectors searching 

for examples made by these two firms. This book provides photos for 

collectors and dealers alike with a pictorial panorama of such Heintz 

and Silver Crest items as bowls, jewelry, trophies, vases, and desk 

pieces, as well as essential data regarding value, rarity, maker’s 

marks, and company histories. 


BK657 

How to Sell What you Make, Gerhards 


Focuses on how to sell at crafts fairs, galleries, 

and trade shows. Over half the book is devoted 

to the ins and outs of trade shows. Covers 

the basic aspects of a small business. Four 

appendixes cover trade show promoters; a 

calendar of trade shows; publications; and 

organizations. 

BK998 

Museum of Early American Tools 

(Americana), A, Sloane 


This was one of the most influential books 

on tools and had an impact on the current 

interest in tool collecting. There are over 180 

pen and ink drawings by the author. Originally 

published in 1964, Sloane illustrates the uses 

of tools and covers such diverse crafts as 

logging, carpentry, wheelmaking, tanning, splitting, tools with legs 

and much more. Includes devices used by curriers, wheelwrights, 

coopers, blacksmiths, loggers, tanners, coachmakers, and other 

craftsmen of the pre-industrial age. An informal book, written book 

for cultural historians, woodcrafters, and Americana enthusiasts. 

184 B/W illustrations. 

BK658 

Secrets of Building an Alcohol 

Producing Still, Gingery 


An intelligent person knows that hoarding 

gasoline is not a solution to fuel shortages. 

An intelligent person finds alternative 

solutions, and this machine is just such 

a solution. Instead of trying to stockpile 

gasoline, you can make your own substitute out of sugar, corn, 

potatoes, or almost anything you can ferment into alcohol. This 

still will remove the water, creating almost pure alcohol, nearly 

200 proof, so you can burn it in just about any type of engine. 

BK994 

Shop Drawings for Craftsman Inlays 

& Hardware, Lang 


Lang has gathered all of the most important 

Craftsman motifs into one source. The drawings 

are accurate, complete and fully detailed. 

They can be enlarged or reduced as the need 

arises. It was the copper, brass, and wrought 

iron inlays, knobs, hinges, and latches that gave so much charm 

to the Craftsman Style. The book includes introduction chapters 

on history, design, and technique. 76 B/W illustrations. 

BOOKS TRADES & CRAFTS 

BK966 

Tools & Trades Of America’s Past, 

The Mercer Museum Collection, Arbor 


Nearly 100 years ago Henry Mercer began to 

amass a vast collection of the tools and implements 

used by Americans before the industrial 

age. These everyday objects of ordinary people 

– their axes, sickles, pie plates, and spinning 

wheels – provide a valuable glimpse into the material culture of the 

past. 236 illustrations. 

BK996 

Tools Rare and Ingenious, 

Nagyszalanczy 

216 pages, 10 x 10 (Hardcover ) 

“Celebrating the World’s Most Amazing Tools”. 

A world tour of objects that rarely leave the private 

vaults of collectors. Craftsmen have always made 

their own tools and this is a celebration of some of 

the most exquisite tools every made. Many were 

constructed for actual use while others were made as presentation 

pieces or to showcase the skills of their creators. Numerous patent 

models are also included. Over 400 color photos explore instruments 

particular to woodworkers, blacksmiths, coopers, wheelwrights, and 

others. This is a rare and fascinating look at the tools from the golden 

age of toolmaking with 418 color photos. Included are: Primitive and 

Ancient Tools, Decorated Tools, Fine and Fancy Tools, Ingenious 

Mechanisms, Maker’s Marks and Logos, Magnificent Miniatures, 

Combination Tools, Patent Models and Prototypes, Presentation and 

Exhibition Tools, Tools of Many Trades, and Craftsman-Made Tools. 

BK960 

Tools that Built America, The, Bealer 


In this richly illustrated book, author and master 

craftsman Alex Bealer tells the fascinating 

story of woodworking in colonial America, 

enthusiastically describing and clearly depicting 

a wide array of devices – from axes wielded by 

frontiersmen to clear the land and build log 

cabins, to carpenters’ saws, planes, and hammers, and furniture-makers’ 

chisels, bevels, lathes, and calipers. Over 200 illustrations. 

BK102 

A Wooden Iowa Rifling Bench, 

Bookout and Neubauer 


A Wooden Iowa Rifling Bench by Steve Bookout 

and Alan Neubauer. Shows in detail how to make 

your own wooden rifling bench, and the new DVD 

where Steve demonstrates how to ream the bore 

of a commercial unrifled barrel blank, then rifle it 

in a traditional manner with his homemade rifling bench. 

BK102/DVD61S 

Set of Book (A Wooden Iowa Rifling Bench) and 

DVD (Rifling a Gun Barrel) 

(See the above book paragraph and page 121 for 

DVD). You can have both book and DVD for your 

references. 


BOOKS HORSESHOEING 

HORSESHOEING 

BK676 

5 Shoes, 1 Shoe Board, Gregory 

24 pages, 8-1/2 x 11 (Pamphlet) 

Here’s a practical step-by-step guide for building 

a shoe display board that will help you further 

educate your shoeing clients, work toward 

possible farrier certification and undertake a 

great learning experience. 

BK76 

AFA Certification Study Guide for 

Certified or Intern, Blombach 


Excellent study guide to prepare you for the Certified 

or Intern AFA Written Exam. The present level of 

examination by the American Farriers association are 

“Intern”, which indicates one who has successfully 

completed entry level examination, “Certified Farrier”, 

recognition of individuals with a minimum of one year practical experience 

who have met AFA’s basic standard of horseshoeing knowledge and skill. 

BK75 

AFA Certification Study Guide for 

Journeyman, Blombach 


This “Complete Self Help Study Guide” contains 

new information essential to maximizing your 

written test score plus all the little known “ins 

and outs” of passing the AFA practical! 

BK15 

Artistic Horseshoeing, Rich 


This installment in the American Farriers Journal’s 

“Farrier Classics” series relies on the time-tested 

advice of renowned farrier George E. Rich. A 240page 

reprint of the original book from 1887 that was 

updated in 1907, complete with illustrations, this book 

will be appreciated by novice and experienced farriers alike. With 

all its timeless information, photos and illustrations, you’ll make this 

highly valuable book a part of your shoeing library’s inventory. 

BK755 

Better Basics, Gregory 

128 pages, 8-1/2 x 11 (Spiral Bound Softcover) 

Chris Gregory, owner and instructor of the Heartland 

Horseshoeing School in Missouri, takes a step-bystep 

approach to help you improve your horseshoeing 

and forging skills. Lavishly illustrated and written 

by one of the top farriery instructors in the country, 

this book has something for everyone from the 

novice who is just starting out, to the experienced professional who 

wants to polish his skills. Copyright 2004. 

BK91 

Cavalry Horseshoer’s Technical Manual, 

US War Dpt. 


This illustrated 1941 technical manual was 

written by the War Department for cavalry farriers. 

Beginning with a discussion on anatomy and 

physiology of the equine hoof and leg, this manual 

goes on to describe forging and shoeing practices, 

traction devices and hoof care for hardworking cavalry horses. This 

reprint has invaluable information, diagrams and historical value. 

BK524 

Foot of the Horse, The, Roberge 


The in-depth shoeing advice presented over 100 

years ago will help you place many of today’s 

shoeing challenges in proper perspective. The book 

outlines numerous rules for shoers based on David 

Roberge’s 45 years of working with a footcare system 

in existence since 1850. Besides offering detailed advice in 18 

general areas of shoeing, this valuable reference zeros in which 

detailed explanations on 424 specific items that still relate to your 

everyday shoeing concerns. 

BK77 

Hoof Talk: The Hairline Tells It All, Bergeleen 


Bergy’s first book contains everything your horse 

wants you to know about good horses. This book 

offers an enlightening tour of the hoof. Bergy 

provides a simple method for evaluating balance 

and stress in the hoof. He is a long-time shoer, 

instructor and horseman. If you are interested in 

natural hoof care but are not ready to take the shoes off your horse 

Bergy has the answer for you. 

BK16 

How To Horseshoeing Book, The, West 


This is the most comprehensive book of practical 

horseshoeing ever published. Focusing on the very 

best techniques gleaned from more than 1,800 

articles appearing in the pages of American Farriers 

Journal. You’ll learn plenty of new ideas that 

really work with all disciplines, shapes and sizes 

of horses, mules and even zoo animals! When it comes to shoeing 

techniques for animals weighing less than 200 pounds to more than 

2,000 pounds, this book delivers all the essentials of foot care. 

BK29 

Mechanics of Horseshoeing Simplified, 

The, Simpson 


This book contains all the information you need to 

successfully perform a good shoeing job. Helpful 

illustrations guide you through the basics of what 

tools are needed, how to remove the shoes, trim and 

prepare the hoof and more. There is a quiz at each chapters end. 

BK104 

Natural Balance Hoof Care Book & 

DVD Education Set, Ovincek 


A Practical Guide to Hoof Care Science & Foot 

Function for Pleasure & Performance Horses. 

Includes the Natural Balance Hoof Care Book & 

DVD(4) Education System. This is a comprehensive 

learning system for horse owners interested in the 

maintenance of their horse’s feet, to seasoned 

farriers looking for useful information that will 

compliment their current hoof care knowledge. 

Because people learn and comprehend information 

in different ways, the “Natural Balance Hoof Care” 

book also comes with DVD’s (4) that include corresponding sections, 

so sections you read in the book are also visually explained in some of 

the videos. 


BK105 

Natural Balance Hoof Care Book & 

DVD Ultimate Pack, Ovincek 


Includes all of the latest and best 

informational and educational sources 

available today. The Ultimate Pack includes: 

“Natural Balance Hoof Care” Book & DVD 

Education System, “Natural Balance Hoof 

Trimming” DVD, “Natural Balance Shoeing” 

DVD Set That’s over 150 information packed pages & 600 minutes 

of video that covers everything from the vary basics in hoof care, 

to dealing with common pathologies or hoof conditions like club 

feet, underrun or contracted heels, and first aid for laminitis. 

BK94 

The Natural Trim, Bergeleen 


The most complete manual for achieving natural 

feet in the history of the horse industry. You will 

learn how and why you must establish “Natural 

Feet”. 

BK525 

New Hope for Soundness, Ovincek 


Supplies horse owners, veterinarians and farriers 

with background and instruction material to the 

principles of Natural Balance. Contents include: 

The Wild Horse Study, Recognizing Hoof Deformity, 

The Natural Trim, Natural Balance Shoeing, and The 

Equine Digit Support System. There are suggestions 

for hoof preparation and shoe placement throughout the book, along with 

many drawings to help make Natural Balance principles understandable 

and use-friendly. The majority of information is concise and to the point. 

“New Hope for Soundness” is an excellent tool for anyone who is interested 

in helping and maintaining their horses feet. 

BK49 

Principles of Horseshoeing (P3), Butler 

1000 pages, 8-1/2 x 11 x 2 (Hardcover) 

Truly the ultimate textbook of farrier science 

and craftsmanship for the 21st century. Written 

by two experienced authors - together, they 

bring a fresh NEW approach to learning the 

vital craft of horseshoeing. This new, updated, 

expanded third edition shows you how to help 

horses stay sound or return to soundness. 

Nowhere else will you find as complete a collection of foot 

knowledge as in The Principles of Horseshoeing (P3). This is 

the one resource that is a MUST for the library of every farrier, 

veterinarian, and horse lover, and it is a recommended resource 

for AFA certification programs. 2,350 illustrations. 

BK103 

Scientific Horseshoeing, Russell 


Accomplished and celebrated American farrier, Prof. 

Russell was also a prolific writer and illustrator, 

dedicated to farriery as a science. Seasoned farrier/ 

blacksmith Reuel Darling was introduced to Russell’s 

material as a mimeographed text when he was a 

farrier student under Ralph Hoover at California 

Polytechnic Institute. Because of the timeless nature 

of Russell’s work, Reuel was inspired to preserve the classic by 

reprinting it on acid-free paper. Some of the original print engravings 

from the book hang in the farrier offices at Cal Poly. 

BOOKS HORSESHOEING 

BK111 

Shoeing the Draft Horse, Martin 

American Farriers Journal 

14 pages, 8-1/2 x 10-3/4 (Pamphlet) 

Shoeing the draft horse can be intimidating, 

if only because of these magnificent beasts’ 

massive size and formidable strength. But you’ll 

gain new confidence with the help of Scottish 

farrier Edward Martin, the world’s No. #1 draft 

horseshoer. You get two dozen color photos and plenty of tips that 

cut this job down to size. 

BK682 

Strategies for Overcoming Long-Toe, 

Underrun Heel Concerns, American 

Farriers Journal 

16 pages, 8-1/2 x 11 (Pamphlet) 

This Special Management Report explores 

possible causes for long toes and underrun 

heels and then seeks ways to correct them. 

From conformation to bedding, foals to senior 

horses, no stone is left unturned. This report is a must for any 

horse enthusiast’s library. 

BK937 

To Shoe or Not to Shoe, American Farriers 

Journal 

16 pages, 8-1/2 x 10-3/4 (Pamphlet) 

Illinois farrier Seth Warner lays out the case 

in favor of shoeing horses, cutting through the 

myths and misinformation that so many horse 

owners have to deal with. Warner convincingly 

argues that the benefits of good horseshoeing 

far outweigh problems it sometimes causes. He addresses 

protection, support, weight distribution and breakover, and also 

touches on the role of genetics. He also lays out the basics of a 

proper shoeing job. This report is a good one to have on hand 

when your customers ask about the pluses and minuses of having 

horses go barefoot. 

BK473 

Well-Shod, Baskins 


A comprehensive guide for horse owners 

who want to learn more about proper shoeing 

and hoof care for their horses. It also serves 

as a detailed manual for those considering 

horseshoeing as a career. Easy-to-read detail 

and hundreds of photos and illustrations show 

step-by-step trimming and shoeing methods. 

Pieh Tool offers Natural Balance 

Therapeutic Steel Shoes (page 9) 

and Aluminum Horseshoes (page 12). 

Our full line of horseshoes are on pages 4-14. 

See also DVD63, Natural Balance Hoof Trimming 

and DVD64, Natural Balance Shoeing, page 130. 


BOOKS HORSE CARE 

HORSE CARE 

BK814 

Comprehensive Guide to Equine 

Veterinary Medicine, The, Crabbe 


Horses are among the most complex creatures 

in the animal kingdom: so much can go wrong 

so quickly. And when it does, these delicate, 

injury prone beasts need swift treatment. 

Otherwise, a simple eating disorder might 

rapidly lead to death and a minor hoof injury to 

permanent lameness. To make things even more difficult, equine 

veterinary care is costly and insurance prohibitively expensive. 

That’s why any horse owner, as well as equine veterinarians and 

students of veterinary medicine, must have this ultimate resource 

on hand. The Comprehensive Guide to Equine Veterinary Medicine 

is a thorough, carefully designed medical reference featuring 

four-color anatomical drawings by the most acclaimed veterinary 

illustrator Kip Carter. It covers all areas of equine health, including 

diagnosis and treatment, and delves into basic equine behavior 

and safety, preventive health care, and first aid. Twelve in-depth 

chapters outline the individual body systems, anatomy and 

physiology, and abnormalities. A Health Care section includes 

alternative therapies such as acupuncture and homeopathy, 

along with options for rehabilitation and physical therapy. Critical 

information appears in tables, charts, side bars, and bulleted lists 

for quick access. In addition, there’s an informative history of 

veterinary procedures, followed by three valuable appendices with 

terminology, common medications, and advice for the first-time 

horse owner. A selection of the Equestrian Book Club. Photos. 

BK22 

Hoof Care for Horses, Heymering 


No foot, no horse. It’s an old saying, but it rings 

as true today as it ever did in humankind’s 

history of horsemanship. What can you do to 

ensure your horse’s hooves are sound? Follow 

the advice of those who know horses’ hooves 

best: Farriers. In Hoof Care for Horses, long-time 

farrier Henry Heymering outlines the best preventive maintenance 

for hooves, giving practical tips on achieving dry footing, good 

ventilation in stalls, proper diet, and adequate exercise. You’ll even 

discover the best way to pick up and clean a horse’s hoof, as well 

as how to properly hold a horse for a farrier. 

BK14 

Horse Owners Guide to Natural Hoof 

Care, Jackson 


The goal is to eventually have the horses hooves 

resemble that of wild horses, which Mr. Jackson 

has studied extensively. He describes how to 

accomplish this. See what a natural hoof looks 

like and what an un-natural (shoed) one looks like. 

Learn how to handle difficult horses, how natural hoof care can 

conquer problems like laminitis, navicular, hoof contraction, sole 

abscesses, white line disease and others. 

We offer a 

large variety of 

livestock feeds! 

BK939 

Laminitis and Founder, Prevention and 

treatment for the 

Greatest of Success, Butler & Gravlee 


Identifies edema of the laminar tissues and 

sublaminar tissues as a cause of laminitis and 

founder. Emphasizes that swelling must be 

reduced to prevent further damage to the sensitive 

foot tissues; that the damaged structures must be supported so 

the body can repair them; and that the destroyed tissue must be 

rebuilt by feeding the horse a balanced diet that includes nutrients 

that support dermal tissues. This book provides the foundation for 

horse owners, farriers, and veterinarians to work together for the 

good of the horse. 

BK807 

Making Natural Hoof Care Work For 

You, Ramey 


Natural hoof care is now being recognized 

as the most important new direction in horse 

care. At the forefront of this artful science is 

Pete Ramey, experienced natural hoof care 

practitioner. Pete has written Making Natural 

Hoof Care Work for You for horse owners, 

vets, and, of course, hoof care providers, wanting “straight talk” 

and reliable information on how to “cross-over” into natural hoof 

care. Pete’s book is written in an easygoing, maverick style, that 

will guide you with confidence away from the pitfalls of shoeing 

and into the heart of true natural trimming, booting, and natural 

horsekeeping practices. 

BK61 

The Natural Horse, Jackson 


Based on ground-breaking research of wild 

horses, The Natural Horse vividly explains what 

wild horses can teach us about the horse’s 

natural gaits, behavior, needs, capabilities, 

socialization, diet and hooves. Learn the 

natural social hierarchy of horses and how they 

communicate with each other. Discover which types of movements 

are natural for horses, how to train you horse using its natural way 

of communicating and much more. 

BK752 

Packer’s Field Manual, The, Hoverson 


In a big format for ease in the field. Written by 

the recognized “top expert” in the country on 

packing on mules or horses with a Decker Pack 

Saddle. From the selection of pack stock on to 

the basics of Decker saddles, pads and tack, 

author Bob Hoverson takes you through the 

entire packing process step-by-step using text 

and photographs to show the process. He also covers the various 

hitches used in Decker packing, ropes, knots and splicing, caring 

for your tack, and other useful information on such subjects as 

feeding, shoeing, vaccinations and worming, dental care, stock 

first aid, and dealing with brand and health inspections. Also 

covers the use of equipment and techniques so the wilderness 

horse traveler will leave only tracks and make low impact on the 

land. 186 B/W photographs and numerous illustrations. 


BOOKS OXEN & MULES, FARRIER INVOICE PAD & MAGAZINES 

OXEN & MULES 

FARRIER INVOICE PAD 

BK54 

INV9B 

Oxen - A Teamsters Guide, Conroy 

Invoice Pad- Misgivings Design 


2 Part Carbonless 5-1/2 x 8-1/2 Invoice Pads 

The definitive resource for selecting, training, feeding, 

Contains 50 sets of 1 each white and yellow copies. 

and caring for the mighty ox. Written by a professor 

Invoice feature handy wrap-around cover, with 

of with more than two decades of experience 

place to note the date of the invoice copies for 

as a trainer and teamster, the book shows readers 

future filing. Features listing of various services 

how to select an ideal team, fit a yoke and bows, 

performed - 15 horses per page. 

address common challenges, and maintain a team’s overall health. 

He also explains how to use oxen safely for a variety of farming and 

logging tasks, and how to train a team for public demonstrations and 

competitions. Filled with dozens of photographs/illustrations, including a 

16-page color insert, useful reference charts, and a glossary of terms. 

BK140 

Packing In On Mules and Horses, Elser 

& Brown 


Jammed with good pictures, illustrations, and 

advice on just about anything you’d want to 

know about packing in and camping. For those 

who yearn to pack in the wilderness country of 

the West, either on their own mules and horses 

or those of a professional packer, here is a book that takes the 

mystery out of back country pack string travel. By teaching you the 

tricks of the trade, professional outfitter Smoke Elser shows how 

your trip will be easier and more enjoyable by knowing more about 

the animals used and why, and how they carry their loads as they do. 



We customize each certificate for you! 

LID-LOCKER Seat Bracket 

An adjustable, slotted bracket with a clamping 

knob that allows the bracket to be slipped over 

and fitted to the top of the seat in a vehicle. 

The unit may be used in a forward or rear facing 

direction and will hold the hat approximately two 

inches from the back of the seat. 

All units are powder coated for a lasting finish 

in a beautiful copper tone. 

MAGAZINES 

AMERICAN FARRIERS JOURNAL 

AFJMAG 

American Farriers Journal Magazine, 

Lessiter Publications 

Current issue will be sent. Back issues 

sent on request. The Hands-On Magazine 

For Professional Farriers, is the worlds leading 

magazine on horseshoing and equine footcare. 

AFJ publishes articles on horse anatomy, 

physiology, leg pathology, therapeutic shoeing, mechanics, special 

shoeing techniques, forging, welding, horse handling, working 

with veterinarians, farrier professionalism, customer relations, 

horseshoing tools and products, and all phases of business 

practices and management. AFJ is a paid-circulation magazine. 

We offer Hand-Crafted Gifts, Jewelry 

and Forged Accessories by Local Artists. 

See Page 91 


See Page 91 


WALL CHARTS EQUINE ANATOMY CHARTS 

ANATOMY CHARTS 

AC1 

Anatomy 

Normal Hoof, Tell It Like It Is, Hayes 

8-1/2 x 11 

This 20” x 18” full color laminated poster 

is an excellent tool for illustrating the inner 

workings of the equine foot. Along with the 

3-D model of the basic internal structures of 

the foot, this poster has both a soft-tissue 

and a skeletal diagram of the effects of a 

toe-first vs. a heel-first landing. These 

illustrations and diagrams make it easy to 

understand the possible causes of hoof pathologies such as Navicular 

Syndrome & heel pain. 

AC2 

Anatomy 

Acute Foundered Foot, Hayes 

8-1/2 x 11 

These anatomy charts have a lot of wonderful 

detail. It is printed at a resolution of 1000 

dots-per-inch and is laminated in plastic. 

Great reference tool for veterinarians, 

students, horseowners and horseshoers. 

WC05 

Foot and Hoof Anatomy 

20 x 26 

Durable laminated poster 

depicts the anatomy of the 

hoof and it’s neurovascular 

anatomy. Other illustrations on 

this poster include Layers of 

the Hoof, Stages of Laminitis, 

Parasagittal Section of the 

Hoof, and more. Laminated on 

both sides in heavy plastic. 

WC16 

Navicular Syndrome 

20 x 26 

Illustrates the various aspects 

of navicular disease. Shows 

the affected bone, tendons and 

bursae as well as the vascular 

and neural anatomy of the heel 

area of the hoof. Laminated on 


WC09 

Dental Anatomy & Aging 

20 x 26 

Durable laminated poster depicts 

the anatomy of the skull, 

showing the roots of the teeth 

and corresponding vascular 

system. Detailed age determination 

illustrations from age 

one year through 25 years. 

Laminated on both sides in 

heavy plastic. 

WC14 

Conformation 

20 x 26 

Durable laminated poster shows 

detailed illustrations of ideal 

conformation and conformation 

faults. Shaded areas denote 

areas of stress on feet and legs 

with faults. Laminated on both 

sides in heavy plastic. 

WC02A 

Fore Limb Anatomy 

20 x 26 

Shows the fore limb & it’s 

corresponding joints. Features 

full skeleton, highlighting the 

bones of the shoulder, elbow, 

carpus & lower leg - emphasis 

on the fetlock, pastern & coffin 

joints. Laminated on both sides 

in heavy plastic. 

WC02B 

Hind Limb Anatomy 

20 x 26 

Anatomy of the hind limb and 

it’s corresponding joints. Shows 

the full skeleton, highlighting 

the bones the hip, stifle, hock 

and lower leg. Laminated on 


WC17 

Internal Hoof Anatomy 

& Biomechanics 

20 x 18 

This full color laminated 

poster is an excellent tool for 

illustrating the inner workings 

of the equine foot. Along with 

the 3-D model of the basic 

internal structures of the foot, 

this poster has both a softtissue 

and a skeletal diagram 

of the effects of a toe-first 

versus a heel-first landing. These illustrations and diagrams make it 

easy to understand the possible causes of hoof pathologies such as 

Navicular Syndrome and heel pain. 

Try a bag of LMF Feed today! You and your 

horse will notice the difference! 

Mention this ad and Save $3 on your first bag! 


ARMOR 

DVD53 

Armorer’s Workshop Set, The Vol 1 & 2: 

A Step-by-Step Guide to Making a 

Medieval Great Helm and Hourglass 

Gauntlets, Fuller 

Running Time: approximately 375 min, 4 DVDs 

Learn the lost art of armor making from Peter 

Fuller, one of the few modern masters of the craft. 

Volume 1 covers every step of this project in 

meticulous detail, including cutting the pieces, shaping, riveting, 

polishing, and much, much more. The skills taught in this video 

will not only enable you to make your own historically accurate, 

battle-worthy helmet, they represent a comprehensive apprenticeship 

in the armorer’s craft. In Volume 2, Fuller builds on the skills 

he imparted in the first volume, taking you step-by-step through 

the creation of the smaller, more detailed pieces that make up a 

pair of hourglass gauntlets. He teaches you how to weld and sand 

individual pieces into a strong assembly, anneal and shape brass to 

make it easy to work, chase fine lines into your piece for historical 

accuracy and polish even the smallest pieces of steel to a mirror 

finish consistent with the appearance of 16th century armor. 

Includes full-scale patterns for the gauntlets and specialized armormaking 

tools, including the fluting tool. 

Peter Fuller is a former curator of the historical arms and armor 

exhibit at the Glenbow Museum in Calgary, Alberta, Canada. 

Through years of painstaking research of authentic period armor, 

he rediscovered the skills of traditional armorcraft. As owner of 

Medieval Reproductions, Fuller has more than 21 years of experience 

handcrafting the highest quality reproduction arms, armor 

and period accessories for collectors all over the world. For more 

information, consult his website. 

BLACKSMITHING 

DVD17 

Artist Blacksmithing, Parkinson 

Total Running Time: 154 minutes (2 DVD’s) 

Explains the fundamental techniques of working with 

hot steel, and how those techniques can be used 

creatively in designs. Set in his own workshop, it 

is a rare opportunity to see a leading blacksmith 

in action. Peter is an exceptional tutor. In this film, 

he brings his own insights to the craft while explaining both the 

processes and pitfalls. 

DVD4 

A Blacksmith Primer, McDaniel 

Running Time: 6 hours 3 DVD’s 

A Course in Basic and Intermediate Blacksmithing 

with Randy McDaniel. This is the companion video 

to “The Blacksmithing Bible, A Blacksmithing 

Primer”. The author of the indispensable reference 

book appears in these videos, teaching the 

standard techniques that all blacksmiths must 

know to master the craft. This is a must-have for 

every blacksmith’s video library! You will learn how to organize 

your shop, build your first fire, hold and use your hammer, choose 

your stock, make tools for any job, forge weld, make scrolls, 

hinges, how to make animal and human heads and much, much 

more. Randy’s simple, straightforward and humorous approach to 

learning to be a good blacksmith is as much a part of these videos 

as it is his book. Shot and edited in the same clear, user-friendly 

style you have come to expect from Love of Art Productions, you 

will enjoy watching Randy demonstrate all the techniques close-up, 

just for you. 

VIDEOS ARMOR, BLACKSMITHING 

DVD13 

Basic Blacksmithing, Vol. 1, Hershel House 

Running Time: approximately 90 minutes 

Hershel House, a premier craftsman, famed 

buckskinner, knifemaker and gunsmith provides an 

excellent presentation on basic skills. He includes 

building a proper fire, forging, brazing, welding, 

tempering, hot cuts and hot filing. Included is a bonus 

section on tuning a gun lock. 

DVD15 

Basic Blacksmithing, Vol. 3, Hershel House 


This final tape in the in a series of three with 

Hershel House features several projects: forging a 

bootscraper, strap hinge with pinnel, small camp ax, 

cold forging, forging stamps and gravers, an awl and 

trivet. 

DVD14 

Blacksmithing, Vol. 2, Hershel House 


This is the second of three by Hershel House. 

It demonstrates more blacksmithing skills and 

advanced techniques. Useful information for 

the beginner to intermediate blacksmith, he 

demonstrates forming an eye, forging S hooks 

and tongs, making a Betty grease lamp, a bullet 

ladle and forging a Kentucky belt ax. He keeps his 

instruction on the light side, using liberal humor. 

DVD10 

Broommaking for the Blacksmith, Mohr 


In 1976, Jeff began is arts and crafts business. He 

studied as an apprentice with a Carolina craftsman 

in traditional broommaking for one year, learning the 

style of tying brooms and making unique wooden 

handles. Jeff began his career in the arts and crafts 

business in 1976. And In 1981, his blacksmithing 

career began, creating interior and exterior architectural iron. 

He has incorporated his techniques of his brooming with the 

blacksmithing craft. In this video he shares his craft of forged 

handles for hand-tied straw brooms. 

DVD8 

Bugs and Birds, Epps 

Running Time: 37 minutes 

Continuing in the vein of its companion video, 

Leaves and Flowers, this tape demonstrates some 

insect and bird motifs that can be used and adapted 

for whimsical decorative work and garden-themed 

pieces. Epps is shown creating critters such as a 

scorpion, a garden snail and a dragonfly, as well 

as a hummingbird and two types of swans. These projects range 

from the extremely simple to the complex , and offer a quick way 

to add lots of ornamental appeal to a decorative project. A brief 

“chalkboard” segment enhances the viewer’s learning opportunity 

by outlining the steps in creating each item, and enhanced video 

and sound make Epps’ instructions clear and easy to follow. A musthave 

for the hobbyist or professional! 


VIDEOS BLACKSMITHING 

DVD3 

The Complete Metalsmith, McCreight 


Tom McCreight demonstrates many of the basic 

techniques of jewelrymaking, including piercing, 

soldering, forging, stone setting and cold 

connections. Close-up photography and onscreen 

graphics makes this a wonderful way to learn. 

DVD5 

The Fly Press, Crouchet 

Running Time: 42 minutes. 

Used in the jewelry industry for hundreds of years, 

where it is known as a screw press, the fly press 

is becoming an increasingly popular tool for the 

blacksmith. This machine allows the smith to 

accomplish many operations on cold steel that 

could formerly only be done “hot”. Obviously, this is 

a great advantage in increasing speed and precision 

in your work. In “The Fly press”, you will learn to evaluate used 

fly presses, what to look for in a new press, how to make tooling, 

and much more. John also demonstrates many common blacksmith 

operations on the fly press such as making tenons, veining, 

straightening stock, bending precise circles and hot stamping. All of 

these techniques are shown to you in the exceptional way that Love 

of Art Productions has come to be known for - clearly, up close, and 

easily understood. John Crouchet says, “if you’re working cold you 

may be making money!” What a novel idea! 

DVD38 

Finishes and Finishing for Metal 

Sculpture, Goehl 


Throughout this video you’ll see the different finishes 

used on Goehl’s sculptures. The chapters are laid out 

so you don’t have to go searching, you can go right 

to the sections you want.” Using some scrap metal, 

learn how to make a tool so you can mount your 

electric drill in a vice which will keep both hands free 

for wire brushing or buffing. 

DVD6 

Forged Animal Heads, Epps 


This tape is the first in a series featuring Mesquite, 

Texas blacksmith, Bill Epps. A nice introductory 

collage of images, underscored by folk music and 

a quote form Longfellow’s “The Blacksmith”, gives 

the viewer a clue that these videos are going to 

be different from most of what’s out there on the 

how-to market. In this video the viewer learns the 

steps in creating several novelty animal heads out of square stock 

and a novelty horse out of a horseshoe (Epps began his career 

as a farrier). The artist also discusses ideas on applications for 

the items shown. A “chalkboard’ segment introduces each item, 

breaking down the process of creating the heads and showing how 

the shape of the steel should change in each step. Epps includes 

tips on technique, including a discussion of the molecular structure 

of steel and why a smith makes his steel “square, then round”, and 

how to use a cross-peen hammer correctly. Forge-welding can be 

clearly seen in the making of one of the pieces, and Epps gives 

tips to the beginning blacksmith on how to get a good forge weld. 

DVD50 

Forging Solutions: Hand Forging 

Techniques Vol. 1, Har-lev 


Amit Har-lev demonstrating basic hand forging 

techniques using the Hofi style hammer. 

DVD51 

Forging Solutions: Power Hammer 

Techniques Vol. 1, Har-lev 


Amit Har-lev demonstrating basic power hammer 

forging techniques on the Big BLU Power hammer. 

DVD52 

Free Form Forging, Hofi 


Uri Hofi forging dozens of elements using the 

Hofi die system on the Big BLU 110. Step by step 

descriptions. Over 40 elements are explained and 

forged. 

DVD47 

Getting Started With Metal Sculpture, 

Goehl 


Goehl explains the tools that he uses, how to use 

them and show the basic tools one needs to get 

started. There are cheap imported tools and then 

there are top quality tools. Both have their uses, but 

the trick is in knowing which one to buy for a particular purpose and 

this video covers that. Materials are thoroughly covered: such as 

copper, brass, tubing, hot and cold rolled steel along with RG45. 

CD797 

BK935 

Hot Shop II, Chapman 

23 pages, 8-1/2” x 11” (Softcover) 

The second booklet about Gene’s shop tooling, 

step by step forging techniques, fly press stuff 

and for you knife makers, two copper handle 

blacksmith knives. Now you can print out projects 

from your computer so you have them right at 

your anvil! 140 photos. 

The Pieh Legacy Collection is always expanding and now also includes - 

DVD45 

Joinery Techniques, Har-lev 


Amit Har-lev demonstrating joinery techniques 

using hand and power techniques. Riveting, 

wrapping, wedging and much more. Step by step. 

Rose Blank Kits (page 53), a Center Punch, Ball Punches, Drift Punches, Eye, and Ear Punches (page 54). 


VIDEOS BLACKSMITHING, CHASING & REPOUSSE, COPPER & FOLD-FORMING 

DVD9 

Leaves and Flowers, Epps 


Third in a series, this video features Bill Epps, a 

Mesquite, Texas blacksmith, demonstrating some of 

the techniques for making flower and leaf motifs for 

decorative projects. There are 5 leaves and 5 flowers 

demonstrated, including several ways of cutting veins 

into a leaf, folding and shaping the leaf form, and 

specific blossoms such as a rose, a morning glory, a 

dogwood blossom and a calla lily. Epps shows how to achieve surface 

texturing on leaves and petals to give a more naturalistic finish to 

the product, and discusses the merits of giving just the inference of 

a specific species, rather than trying for exact replication. The use of 

the guillotine tool, or top/bottom fuller, is shown. Applications for the 

individual items shown are discussed, and the viewer is encouraged 

to find his or her own ways of using these beautiful decorative details. 

Skilled photography and editing, and a working knowledge of the 

subject matter are evident in this video, as in all the others by Love of 

Art Productions. 

DVD7 

Making Tongs, Epps 


This video is the second in a series released by 

Love of Art Productions. Making Tongs shows 

the blacksmith making three different styles of 

tong joints with three different tong heads. First 

we see the Twisted Joint/Scrolling Head tong, then 

the Traditional Joint/Wolf-jaw tong and finally the 

“Champion” Joint/Bolt Head tong. Epps also shows 

a variety of other specialty tongs he has made, and discusses the 

importance of a blacksmith being able to make his own tools. Tips such 

as how to quench moving parts will help the student blacksmith avoid 

frustrating mistakes in his own shop. The viewer sees the artist using 

a power hammer in this video to draw out tool handles, as well. As 

in the first video, Forged Animal Heads, the directors use careful 

editing, good voice-over enhancement and a “chalkboard” segment 

before every piece demonstrated, to help the viewer duplicate Epps’ 

techniques. Good production value and Epps’ casual country wit make 

this a video that every smith will want to have in his or her how-to library. 

DVD44 

Tools and Techniques, Featuring Amit Har-lev 

Two disk set 

Running Time: 2 hours 22 minutes 

Amit Har-lev demonstrating the making of anvil tools and 

techniques using them. Hardy, Fuller, bending fork, cone 

mandrel, dish swage and on the bonus CD a shelf stake. 

DVD48 

Trees, Trees, Trees, Goehl 


Trees can be used in scenes or as stand alone wall 

sculptures, whether in groupings or individually. You 

can take some of these trees that would be fitting 

for a casual setting and produce a tree or trees that 

fit perfectly into a formal setting. These trees also 

work well for offices and conference centers. Also 

included is how to make two tools that you can use 

while making the trees and also for other sculptures. One tool is a 

small parts leverage bender. An oxygen acetylene torch and the 

ability to braze are the main requirements for accomplishing these 

projects. 

CHASING & REPOUSSE 

DVD42 

POWER Repousse, Chapman 

Running time: 75 minutes 

Part two of a three part series. Using power 

hammers and hand held pneumatic hammers for 

large scale repousse’. Forging and sinking copper 

bowls and more. 

DVD43 

POWER Repousse and Chasing, 

Chapman 

Running time: 1 hour 27 minutes 

Part three of a three part series 

Using power hammers and hand held pneumatic 

hammers for large scale repousse’. Creating a high 

relief abstract human face in steel. 

DVD41 

Repousse, Chapman 

Running time: 50 minutes + bonus 

Part one of a three part series 

Techniques using forms to create designs in a 

negative space. Forming copper and steel to 

make large repousse’ wall decorations in the 

metals studio. Sun/Earth form and the Oakhill 

Ironworks copper leaf logo. 

COPPER & FOLD-FORMING 

DVD49 

Forging a Copper Rose, Har-lev 


Forging a one piece copper rose using hand and 

power techniques. Step by step from blank size to 

finishing. Bonus toolmaking, the chisel, a forged 

gouge (used in making the rose). 

DVD37 

Forming Copper, Goehl 


Copper is one of the most malleable of the metals 

and also the most forgiving. The tools Goehl uses 

are rather primitive. Learn how to make the forming 

mallets, and what he uses for planishing. You will 

learn two techniques to form bowls. Whether it’s 

a copper bowl, an abstract sculpture or any piece 

formed into a shape that comes out of your mind, 

you can do it with the tools and techniques shown 

in this video. 

DVD47 

Getting Started With Metal Sculpture, 

Goehl 


Goehl explains the tools that he uses, how to 

use them and show the basic tools one needs to 

get started. There are cheap imported tools and 

then there are top quality tools. Both have their 

uses, but the trick is in knowing which one to buy 

for a particular purpose and this video covers that. Materials are 

thoroughly covered: such as copper, brass, tubing, hot rolled and 

cold rolled steel along with RG45. 


VIDEOS COPPER & FOLD-FORMING, KNIFEMAKING 

DVD3 

The Complete Metalsmith, McCreight 


Tom McCreight demonstrates many of the basic 

techniques of jewelrymaking, including piercing, 

soldering, forging, stone setting and cold 

connections. Close-up photography and onscreen 

graphics makes this a wonderful way to learn. 

KNIFEMAKING 

CD796 

Anter & Iron II: Building a Mountain 

Man Folding Knife - Book on CD, Chapman 

5 MB PDF files for monitor viewing 

41 MB files for printing 

This is the CD version of the book BK449 Antler 

and Iron II. You are able to print out your projects 

now! Very convenient when working at the anvil. CD shows how 

Gene Chapman builds his Mt. Man Folders. Blacksmiths, bladesmiths 

and knifemakers will find this an invaluable addition to their 

reference library. Over 100 photos and drawings show step-by-step 

construction of a “Times Gone By” masterpiece. This folding knife 

can be built just like our forefathers would have, without power tools. 

DVD46 

Basic Damascus Patterns, Norris 


Renowned knife maker Mike Norris leads the viewer 

through the important steps of forming basic 

Damascus patterns in preparing and forging the billet. 

See also: A Damascus Blade A to Z. Steps include: 

Flux less Weld, Power Hammer and Press welding/ 

forming, Hydraulic Press with Textured Dies, Rolling Mill, and Grinding. 

DVD28 

Damascus Blade from A to Z, Norris 


Norris gives you an up-close, step-by-step look at 

the process of preparing a billet of Damascus steel 

and “cutting away everything that doesn’t look like a 

knife!”. Lessons include preparing and forging the 

billet; grinding and sanding techniques; etching techniques; pattern 

design and finishing techniques. 

DVD67 

Ed Fowler’s Knife Talk, Vol. 1, Fowler 


Welcome to the World of the Forged Blade Devoted the past 36 

years to the development of Fowler’s version of Excalibur, The 

High Endurance Performance Knife. Many have contributed to the 

knowledge you will see and hear in this video some through books, 

phone calls, conversations and friends who have joined me in the 

pursuit of the best knife we can make. All of the information you 

are about to view is proven by Rex and Ed through many hands on 

experiments and laboratory testing of each and every event that follows. 

Forging a high endurance performance knife is an art based 

on science that is subject to empirical evaluation. You will view the 

result of thousands of hours and hundreds of blades that have been 

tested to destructon in their quest to reveal what works. 

DVD35 

Fileworking, Dushane 


Learn from Fileworking Master Dwayne Dushane in 

your own home. Watch as he takes you step-bystep 

through 3 different designs of fileworking. You 

will learn the S pattern, the Vine pattern, and the 

Rope pattern in simple to follow steps. See how 

easy it is to embellish your knives with inexpensive 

tools such as files. Discover techniques that will make your 

work look more professional. 

DVD36 

Forge Welding Cable & Striped 

Damascus, Osborn 

2 DVDs, Running Time: 123 minutes 

Gene Osborn walks you step by step through the 

process of forge welding cable Damascus. He will 

show you techniques that will allow you to “work 

smarter, not harder”. On disc two Gene reveals his 

secrets on forge welding striped cable Damascus. 

You will learn the secrets needed to turn an ordinary piece of steel 

cable into a striking Damascus billet or blade. 

DVD66 

Forging a Bearded Viking Axe, Austin 


In 51 minutes, Forging a Bearded Viking Axe 

covers the “Split-and-Wrap” method of forgewelding 

an axe-eye, and all of the other necessary 

steps in forging and steeling the bearded axe 

shown on the cover. 

DVD55 

Forging Damascus: How to Create 

Pattern-Welded Blades (2 DVD Set), 

Hrisoulas 

Running Time: 3 hours and 18 minutes 

Jim Hrisoulas is a master bladesmith specializing 

in medieval broadswords and daggers and 

Damascus pattern welding. He has almost 30 

years of experience at the forge. 

DVD29 

Introduction To Knife Engraving, An, Cover 


Watch as Ray Cover guides you through the steps 

necessary to complete some of the most beautiful 

art-work in the world today. Ray is an accomplished 

engraver and a trained art teacher who has taught 

from kindergarten to college level art classes. He 

discusses design and layout techniques, explains edge 

geometry and sharpening alternatives, bordering and 

outlining basics, shading, stippling backgrounds, inlays, and more. Ray uses 

different models for illustration of the finer details of his work that would be 

hard to see on camera, such as large wooden chisels that show the angles 

and geometry much better than the actual gravers due to the miniature size 

of the tool itself. 

Be connected with us -- check the newest products 

and the latest events at Pieh Tool . . . 



DVD56 

Japanese Silk Wrapped 

Handles, Polzien 

Running Time: 150 Minutes (2 DVD) 

Don Polzien has been making all 

types of knives for over 15 years. He 

specializes in traditional Japanese 

pieces, especially Tanto Knives 

(short blades 12 inches and shorter). These consist of many blade 

styles, as well as endless varieties of Saya (Scabbards) and fittings. 

In this second DVD Don will take you step-by-step from material 

selection to tools required as well as give you his insight on 

how to produce your own exotic Japanese silk wrapped handles. 

You will truly be amazed by the skills you will acquire from this 

master knife maker at work. 

DVD57 

Katana-A Modern Craftsman’s Guide 

to Making a Japanese Sword, Hayes 

Running Time: 2 hours 

Get ready for the ultimate do-it-yourself project: 

a battle-worthy handmade Japanese katana 

(long sword). In this one-of-a-kind video, 

Master Bladesmith Wally Hayes takes you 

step-by-step through the process of designing 

and building a Katana-Tac – a simplified tactical Katana suitable 

for traditional martial arts practice or modern battlefield use. You 

will learn exactly how to design, profile, grind, temper, polish and 

haft your very own working katana using a minimum of tools and 

equipment. You will also learn some of the most closely guarded 

secrets of both traditional and modern-day swordmaking, including 

the construction of a low-cost charcoal forge and the exact process 

for Japanese-style clay tempering. Once your blade is properly 

tempered, Hayes teaches you how to polish it to reveal the hamon 

(temper line) and haft it with a traditional cord-wrapped handle. For 

information purposes only. 

DVD58 

Loveless Legend 

How To Make Custom Knives, Loveless 

and Merritt 


This ground-breaking film documentary reveals 

the inside secrets and tips of the knifemaking 

trade as they’ve evolved in the shop of R.W. 

Loveless. Learn the rare art of custom knifemaking 

from a true master as he shares his expertise and talks 

in-depth about his design philosophy. 

DVD30 

Making a D-Guard Bowie, Dean 


The D-Guard Bowie is a legendary battle weapon, 

part sword - part knife. The powerfully balanced 

design makes it a favorite tool for many tasks, 

but was kept ready for battle at all times. Harvey 

Dean, ABS Master bladesmith, has revealed his 

secrets and improvements for making a more secure and artful 

D-Guard Bowie in this 2 disc video, including an interview with the 

Mastersmith himself. See why Harvey is one of the most sought 

after teachers in this craft and discover how watching his easy to 

follow methods will improve your knifemaking skills the more you 

watch this video. 



VIDEOS KNIFEMAKING 

DVD32 

Mosaic Damascus, Caffrey 


Caffrey will show you some of the most common 

Mosaic Damascus patterns. The information is 

designed to be easy to understand, and will allow 

you to take the “next logical step” towards producing 

your own Mosaic Damascus. Ed covers how to 

create a radial pattern, a basket weave pattern, a 

jelly roll pattern, and how to do an “accordion” fold. Also provides 

a recap of tools, safety, and etching as explained in the previous 

two videos. For advanced knifemakers and shows methods using a 

forge and a hydraulic press. 

DVD59 

Making Do: Volume One, The Poor 

Man’s Forge, Hawk 


NEW! You don’t have to be a certified master 

bladesmith working with highly refined steel to 

craft a quality knife suitable for self-defense or 

general utility. All you need are a few simple 

tools, some time, and metals anyone can scrounge from garage 

sales, building sites, or even the local dump. Survival authority, 

artisan, and neo-tribal weapons expert Jason Hawk has been 

forging greatly sought-after blades for years out of both high-quality 

steel and found materials, and in this video he teaches you how 

easy, inexpensive, and fun it is to forge weapons that will last a 

lifetime. He begins by showing you how to make your own forge 

and anvil out of a few cheap items, and then goes into testing 

found steel to see if it can be worked with. From there, he teaches 

basic hammering, shaping, and heat-treating to guarantee that your 

finished products will hold up under the wear and tear of real use. 

Focusing on two projects, a knife and an axe/adze, this video will 

give the knowledge and confidence to make your own weapons and 

tools no matter how primitive your surroundings are. 

DVD60 

Scripture Damascus With 

Raymond Rybar 


Raymond Rybar has been an Artist/ 

Blacksmith for over thirty years and 

has won countless blade awards 

for his bold Damascus patterns and 

intricate Mosaics. His latest inspiration for his work comes from the 

Bible and is centered on biblical themes: The King Of King Sword, 

The Crucifixion Sword and The Gospel Of John Sword are just a 

few examples of this Mastersmith’s work. In this DVD Raymond will 

take you step-by-step and teach you the skills that are required 

to create this type of beautiful work, from patter selection, pattern 

welding to forging to introducing letters, numbers, word and figures 

into the length on an entire billet. Learn theses extremely sought 

after skills from a true Master of his era. 

Check out our new 

Billy Z Tong 

the Knifemaker Tong! 

See page 57. 


VIDEOS KNIFEMAKING, GUNSMITHING, HORSESHOEING 

DVD 31 

Quillion of Quality, The, Anders, ABS 

Master Smith 


Anders teaches you the finer points of making 

the Quillion dagger as required for the ABS 

Mastersmith. The Quillion dagger is the toughest 

challenge the American Bladesmith Society 

has for impeccable workmanship. Jerome goes 

above and beyond the requirements and explains 

each step in detail. You will see why this dagger won Best Art Knife 

at the Ohio Valley Knife Show just two weeks after it’s conception 

and the filming of this video. Learn the proper way to flute handles 

and the forming of the quills and how to make them equal on each 

side. Learn the fit up and finishing techniques that will help you to 

pass your ABS. Quillion test with confidence. 

DVD68 

Wire Damascus Hunting Knife, The, 

Goddard 


Wayne calls it a two-hour knifemaking adventure. 

This DVD shows every step in making a knife and 

after the billet is welded up. Circa 90% of the 

instruction applies to a knife made of any type of steel. 

CONTENTS anvils, hammers, hammer practice, 

more hammers, distal taper explained, start forge 

welding sequence, forge-welding “heat” defined, forge welding 

the cable, twisting the partial welded cable, guillotine and spring 

fuller tools explained, Second welding heat, billet doubling, third 

welding heat, billet shown, 4th weld, 5th weld, removing scale, 

wet hammering, cut off hardy, scraper for scale, slow action weld, 

blade shaping with the hammer, hot rasp, spring fuller in use, 

shaping the narrow tang w/ the guillotine fuller, coal versus gas, 

the blade preform, preform curve, drawing out the edge bevel, 

shaping hammer, spreading, Packing, normalizing, annealing, talk 

about the color on the video not being accurate, wedge tool, beater, 

schwocking (adjusting the curvature of the blade), vermiculite, baby 

furnace, Heat treating, grind prior to heat treat, decarburization, the 

goop quench, Heat treating sequence: Heating for quench, temper 

colors, safety with quench oil, quenching the blade, cleaning off the 

quench oil, checking the hardness, Alternate tempering methods: 

Edge quenching, the soft back draw, the tempering oven, the brass 

rod edge strength test, home-made belt grinders, grinding, inspecting 

the rough grind, modified vise, hand rubbing the blade, home 

made flat-disc machine, Bowie knife with 15” blade, Etching, cold 

bluing, handle fitting, drilling pin holes, inletting the tang, gluing up 

the handle, pinning, shaping, and finishing the handle, sharpening. 

GUNSMITHING 

DVD61 

Rifling a Gun Barrel, Bookout 


Steve Bookout demonstrates how to ream the 

bore of a commercial unrifled barrel blank, then 

rifle it in a traditional manner with his homemade 

rifling bench. 

BK102/DVD61S 

Set of Book (A Wooden Iowa Rifling Bench) and 

DVD (Rifling a Gun Barrel) 

(See the above book paragraph and page 105 

for DVD). You can have both book and DVD for 

your references. 

DVD62 

Forging A Flintlock Rifle Barrel 


Jon Laubach, assisted by Christopher Laubach 

and Mike Miller, teaches how to hand 

forge a wrought iron rifle barrel tube. Bonus 

material on forging a breechplug and making 

the traditional boring bits. 

HORSESHOEING 

DVD63 

Natural Balance Hoof Trimming, 

Ovincek 


This exciting new video is the ultimate in 

education and training with regarding the 

Natural Balance Hoof Care. This 95 minute 

video contains over 35 minutes of lecture-type 

information that very clearly shows what the needs of the foot are 

and how, through Natural Balance Hoof Care, those needs can be 

met. This initial section is consistent with what you might get from 

a 1 Day Gene Ovnicek Clinic. The remainder of the video contains 

very detailed instruction on trimming horses to be barefoot. Various 

types of feet are covered including: “normal” feet, clubbed feet, 

hind feet, underrun feet and feet that are transitioning from shoes 

to being barefoot. There is also a short section at the end on foal 

management for helping to develop the optimal foot for each horse. 

An unbelievable amount of information. 

DVD64 


Shoeing, Ovincek 

Running Time: 3 hrs 

2 DVD Set 

This video is designed to give 

individuals interest in Natural 

Balance products and Sole 

Support Impression Material. Use instructions are provided for 

horses with mismatched feet, underrun and contracted heels, as well 

as horses that are base narrow or pigeon toed and how to recognize 

hoof distortions and explain how they relate to performance and 

lameness issues. Possible causes for hoof distortions and guidelines 

on how to correct them and prevent them from a simple, common 

sense perspective are covered. Disk 1 includes lecture and dialogue 

covering information on anatomy and biomechanics of the foot, 

then into detailed hoof preparation and shoe placement for fairly 

normal feet, both front and hind applications. In Disk 2 equal detail 

is covered on how to deal with clubbed or mismatched feet, 

underrun & contracted heels, and pigeon toed feet. 

BK104 

Natural Balance Hoof Care Book & DVD 

Education Set, Ovincek 

and 

BK105 

Natural Balance Hoof Care 

Book & DVD Ultimate Pack, 

Ovincek 

(See page 121 for descriptions.) 


PL12-0101 (Organized by page # then alphabetically by description) PRICE LIST 

Case Price 

Item# Description Qty U/M Price Break Pg 

Horseshoe Nails (Capewell) 

CCH5/100 Capewell City Head 5 (100/Bx) 32 BX $9.02 $8.57 1 








CCS5/250 Capewell Countersunk 5 (250/Bx) *S/O 16 BX $22.99 $21.85 1 

CPS5/500 Capewell Platers Special 5 (500/Bx) *S/O 8 BX $45.11 $42.86 1 

CRN3/250 Capewell Race 3 (250/Bx) 32 BX $22.99 $21.85 1 

CRN3.5/250 Capewell Race 3-1/2 (250/Bx) 16 BX $21.69 $20.61 1 






CRH5/250 Capewell Regular Head 5 (250/Bx) 8 BX $22.12 $21.02 1 









CSB4.5/250 Capewell Slim Blade 4-1/2 (250/Bx) 16 BX $21.91 $20.82 1 

CSB4.5/XL250 Capewell Slim Blade 4-1/2 XLong (250/Bx) 16 BX $22.56 $21.44 1 

CSB5/250 Capewell Slim Blade 5 (250/Bx) 16 BX $21.69 $20.61 1 



Horseshoe Nails (Cooper) 

CS5L250 COOP 5 Lite (250/Bx) 16 BX $20.72 $19.69 1 




Horseshoe Nails (Delta) 

D4.5/250 Delta City Head 4-1/2 (250/Bx) 24 BX $16.08 $15.28 2 

D5/250 Delta City Head 5 (250/Bx) 12 BX $19.68 $18.70 2 

D5/500 Delta City Head 5 (500/Bx) 8 BX $39.35 $37.39 2 

D5SL/250 Delta City Head 5 Slim, (250/Bx) 12 BX $19.68 $18.70 2 

D5SL/500 Delta City Head 5 Slim (500/Bx) 8 BX $39.35 $37.39 2 

D6/250 Delta City Head-6 (250/Bx) 12 BX $16.08 $15.28 2 

D6/500 Delta City Head-6 (500/Bx) 8 BX $32.12 $30.51 2 

D5CSL/250 Delta Combo 5 Slim (250/Bx) 12 BX $19.68 $18.70 2 

D5CSL/500 Delta Combo 5 Slim (500/Bx) 8 BX $39.35 $37.39 2 

DX/500 Delta DEX 50 (500/Bx) 8 BX $38.21 $36.30 2 

D2E/250 Delta E 2 (250/Bx) 24 BX $16.08 $15.28 2 

D4E/250 Delta E 4 (250/Bx) 12 BX $16.08 $15.28 2 

D5E/500 Delta E 5 (500/Bx) 8 BX $32.17 $30.57 2 

D3ESL/250 Delta E 3 Slim (250/Bx) 12 BX $19.68 $18.70 2 




D3.5R/250 Delta Race 3-1/2 (250/Bx) 24 BX $19.68 $18.70 2 

D4R/250 Delta Race 4 (250/Bx) 24 BX $19.68 $18.70 2 

D4.5R/250 Delta Race 4-1/2 (250/Bx) 24 BX $19.68 $18.70 2 

Horseshoe Nails (Mustad) 

MCH4.5/250 Mustad City Head-4.5 (250/Bx) 16 BX $19.78 $18.80 2 

ESL3/250 Mustad E Slim 3 (250/Bx) 8 BX $20.18 $19.18 2 



ME2/250 Mustad E-2 (250/Bx) 16 BX $20.97 $19.93 2 










FROST4/100 Mustad Frost 4 (100/Bx) *S/O BX $8.54 2 



MRN3/250 Mustad Race 3 (250/Bx) 16 BX $20.58 $19.56 2 

Pieh Tool Company, Inc. (Prices subject to change) 1-888-743-4866 S/O=SPECIAL ORDER 

Case Price 


MRN3.5/250 Mustad Race 3-1/2 (250/Bx) 16 BX $20.38 $19.37 2 


MRN4.5/250 Mustad Race 4-1/2 (250/Bx) 16 BX $20.18 $19.18 2 



COMBO5/250 Mustad Combo 5 (250/Bx) 8 BX $19.78 $18.80 3 

COMBO6/250 Mustad Combo 6 (250/Bx) 8 BX $20.97 $19.93 3 

MUD4/100 Mustad MUD MN-4 (100/Bx) *S/O BX $8.54 3 



MX50/250 Mustad MX-50 (250/Bx) 8 BX $19.78 $18.80 3 

MX60/250 Mustad MX-60 (250/Bx) *S/O 8 BX $20.18 $19.18 3 

MX70/250 Mustad MX-70 (250/Bx) *S/O 8 BX $20.58 $19.56 3 

Horseshoe Nails (Vector) 

VCH5/250 Vector City Head 5 (250/Bx) 12 BX $18.60 $17.67 3 



VES3/250 Vector E Slim 3 (250/Bx) 12 BX $18.60 $17.67 3 

VES4/250 Vector E Slim 4 (250/Bx) 12 BX $18.60 $17.67 3 

VRN3.5/250 Vector Race 3.5 (250/Bx) 12 BX $18.60 $17.67 3 

VRN4.5/250 Vector Race 4.5 (250/Bx) 12 BX $18.60 $17.67 3 

VRN5/250 Vector Race 5 (250/Bx) 12 BX $18.60 $17.67 3 

VSB5/250 Vector Slim Blade 5 (250/Bx) 12 BX $18.60 $17.67 3 

VSB5/1250 Vector Slim Blade 5 (1250/Bx) 4 BX $88.71 $84.28 3 

VS4.5/250 Vector Special 4.5 (250/Bx) 12 BX $18.60 $17.67 3 

VS5/250 Vector Special 5 (250/Bx) 12 BX $18.60 $17.67 3 

VX50/250 Vector VX-50 (250/Bx) 12 BX $18.60 $17.67 3 

VX60/250 

Studs 

Vector VX-60 (250/Bx) 12 BX $18.60 $17.67 3 

70682 Mustad P-9 Drive-In Stud, 9/16” 50 EA $1.03 0.98 3 

70694 Mustad P-11 Drive-In Stud, 3/8” 50 EA $1.00 0.95 3 

70697 Mustad P-13 Drive-in Stud, 5/16” 50 EA $0.90 0.86 3 

Horseshoes (Plain and Clipped) STEEL 

Diamond Classic 

DC000 Diam Classic 3x0 20 PR $3.25 $3.09 4 

DC00 Diam Classic 2x0 20 PR $3.45 $3.28 4 

DC0 Diam Classic 0 20 PR $3.75 $3.57 4 

DC1 Diam Classic 1 20 PR $4.20 $3.99 4 

DC2 


Diam Classic 2 10 PR $4.35 $4.14 4 

30SX7F187 Kerck SX7 3x0 Fr 18x7mm 15 PR $4.35 $4.14 4 


0SX7F187 Kerck SX7 0 Fr 18x7mm 15 PR $4.35 $4.14 4 



30SX7H187 Kerck SX7 3x0 Hd 18x7mm 15 PR $4.35 $4.14 4 


0SX7H187 Kerck SX7 0 Hd 18x7mm 15 PR $4.35 $4.14 4 


2SX7H187 Kerck SX7 2 Hd 18x7mm *S/O 15 PR $4.35 $4.14 4 

Kerckhaert SX7 Clipped 

30SX7F187Q Kerck SX7 QC 3x0 Fr 18x7mm 15 PR $6.45 $6.13 4 


0SX7F187Q Kerck SX7 QC 0 Fr 18x7mm 15 PR $6.45 $6.13 4 



30SX7H187S Kerck SX7 SC 3x0 Hd 18x7mm 15 PR $6.45 $6.13 4 


0SX7H187S Kerck SX7 SC 0 Hd 18x7mm 15 PR $6.45 $6.13 4 

1SX7H187S Kerck SX7 SC 1 Hd 18X7 mm 15 PR $6.45 $6.13 4 

2SX7H187S 


Kerck SX7 SC 2 Hd 18x7mm *S/O 15 PR $6.45 $6.13 4 











Kerckhaert SX8 Clipped 





131

PRICE LIST (Organized by page # then alphabetically by description) PL12-0101 

Case Price 


Kerckhaert SX8 Clipped - continued 








4SX8H228S 

St. Croix Plain 

Kerck SX8 SC 4 Hd 22x8mm 15 PR $7.54 $7.17 4 

SC11110 St. Croix Lite Plain 3x0 20 PR $3.97 $3.78 4 

SC11111 St. Croix Lite Plain 2x0 20 PR $3.97 $3.78 4 

SC11112 St. Croix Lite Plain 0 20 PR $3.97 $3.78 4 




SC10110 St. Croix Plain 3x0 20 PR $4.29 $4.08 4 

SC10111 St. Croix Plain 2x0 20 PR $4.29 $4.08 4 

SC10112 St. Croix Plain 0 20 PR $4.29 $4.08 4 




Horseshoes (Wide Web and Clipped) STEEL 

Diamond Special 

DS000 Diam Special 3x0 (25/bx) *S/O 20 PR $3.50 $3.33 5 

DS00 Diam Special 2x0 (25/bx) 20 PR $3.90 $3.71 5 

DS0 Diam Special 0 (25/bx) 20 PR $4.10 $3.90 5 





Grand Circuit Shaper 

GCSH-H5 GC Shaper Hind 2x0 (5) 15 PR $5.15 $4.90 5 

GCSH-H6 GC Shaper Hind 0 (6) 15 PR $5.30 $5.04 5 

GCSH-H7 GC Shaper Hind 1 (7) 15 PR $5.30 $5.04 5 

GCSH-H8 

St. Croix EZ 

GC Shaper Hind 2 (8) 15 PR $5.35 $5.09 5 

SC14611 St. Croix EZ Fr 2x0 20 PR $4.75 $4.52 5 

SC14612 St. Croix EZ Fr 0 20 PR $4.75 $4.52 5 





SC14711 St. Croix EZ Hd 2x0 20 PR $4.75 $4.52 5 

SC14712 St. Croix EZ Hd 0 20 PR $4.75 $4.52 5 





St. Croix EZ Clipped 

SC15621 St. Croix EZ F/C 2x0 10 PR $7.00 $6.65 5 

SC15622 St. Croix EZ F/C 0 10 PR $7.00 $6.65 5 




SC15626 St. Croix EZ F/C 4 *S/O 10 PR $7.65 $7.27 5 

SC15721 St. Croix EZ H/C 2x0 10 PR $7.00 $6.65 5 

SC15722 St. Croix EZ H/C 0 10 PR $7.00 $6.65 5 




SC15726 

St. Croix EZ Plus 

St. Croix EZ H/C 4 *S/O 10 PR $7.65 $7.27 5 

SCEZPF1 St. Croix EZ Plus Front 1 20 PR $5.01 $4.76 5 




SCEZPH1 St. Croix EZ Plus Hind 1 20 PR $5.01 $4.76 5 




St. Croix EZ Plus Clipped 

SCEZPF1-SC St. Croix EZ Plus F/C 1 10 PR $7.52 $7.15 5 




SCEZPH1-SC St. Croix EZ Plus H/C 1 10 PR $7.52 $7.15 5 

132 

Case Price 





St. Croix Xtra Wide Web 

SC14111 St. Croix Xtra WW 2x0 20 PR $4.88 $4.64 5 

SC14112 St. Croix Xtra WW 0 20 PR $4.88 $4.64 5 






Horseshoes (Heeled, Toed and Heeled) STEEL 

SC10310 St. Croix Hl 3x0 *S/O 20 PR $4.69 $4.46 6 

SC10311 St. Croix Hl 2x0 *S/O 20 PR $4.69 $4.46 6 

SC10312 St. Croix Hl 0 10 PR $4.69 $4.46 6 




SC10410 St. Croix Toe & Hl 3x0 20 PR $4.85 $4.61 6 

SC10411 St. Croix Toe & Hl 2x0 20 PR $4.85 $4.61 6 

SC10412 St. Croix Toe & Hl 0 10 PR $4.85 $4.61 6 




Horseshoes (Concave) STEEL 

Eventer 

SC14810 St. Croix Eventer Fr 3x0 20 PR $4.75 $4.52 6 

SC14811 St. Croix Eventer Fr 2x0 20 PR $4.75 $4.52 6 

SC14812 St. Croix Eventer Fr 0 20 PR $4.75 $4.52 6 





SC14910 St. Croix Eventer Hd 3x0 20 PR $4.75 $4.52 6 

SC14911 St. Croix Eventer Hd 2x0 20 PR $4.75 $4.52 6 

SC14912 St. Croix Eventer Hd 0 20 PR $4.75 $4.52 6 




SC14916 

Eventer Clipped 

St. Croix Eventer Hd 4 10 PR $5.71 $5.43 6 

SC15820 St. Croix Eventer F/C 3x0 10 PR $7.00 $6.65 6 

SC15821 St. Croix Eventer F/C 2x0 10 PR $7.00 $6.65 6 

SC15822 St. Croix Eventer F/C 0 10 PR $7.00 $6.65 6 





SC15920 St. Croix Eventer H/C 3x0 10 PR $7.00 $6.65 6 

SC15921 St. Croix Eventer H/C 2x0 10 PR $7.00 $6.65 6 

SC15922 St. Croix Eventer H/C 0 10 PR $7.00 $6.65 6 




SC15926 

Eventer Plus 

St. Croix Eventer H/C 4 10 PR $7.65 $7.27 6 

SC14842 St. Croix Eventer Plus Fr 0 20 PR $5.01 $4.76 6 





SC14942 St. Croix Eventer Plus Hd 0 20 PR $5.01 $4.76 6 





Eventer Plus Clipped 

SC15832 St. Croix Eventer Plus F/C 0 10 PR $7.52 $7.15 6 





SC15932 St. Croix Eventer Plus H/C 0 10 PR $7.52 $7.15 6 





S/O=SPECIAL ORDER 1-888-743-4866 (Prices subject to change) Pieh Tool Company, Inc.


Case Price 


Horseshoes (Concave) STEEL 


20TSF Kerck Triumph Steel 2x0 Fr 15 PR $4.81 $4.57 7 

0TSF Kerck Triumph Steel 0 Fr 15 PR $4.81 $4.57 7 




20TSH Kerck Triumph Steel 2x0 Hd 15 PR $4.81 $4.57 7 

0TSH Kerck Triumph Steel 0 Hd 15 PR $4.81 $4.57 7 



3TSH 

Vulcan RM 

Kerck Triumph Steel 3 Hd 15 PR $5.33 $5.07 7 

VRMF20 Vulcan RM Steel, 2x0 Fr 10 PR $5.10 $4.85 7 

VRMF0 Vulcan RM Steel, 0 Fr 10 PR $5.20 $4.94 7 



VRMH20 Vulcan RM Steel, 2x0 Hd 10 PR $5.10 $4.85 7 

VRMH0 Vulcan RM Steel, 0 Hd 10 PR $5.20 $4.94 7 



Horseshoes (Mule) STEEL 

SC25135 St. Croix Mule 3x0 20 PR $3.71 $3.53 7 

SC25136 St. Croix Mule 2x0 20 PR $4.02 $3.82 7 

SC25137 St. Croix Mule 0 20 PR $4.28 $4.07 7 

Horseshoes (Pony) STEEL 

0PONY Diam Pony 0 40 PR $3.59 $3.42 7 

1PONY Diam Pony 1 40 PR $3.82 $3.63 7 

80STDPO Kerck Std Pony 8x0 15 PR $4.47 $4.25 7 



SC25118 St. Croix Pony 0 40 PR $3.54 $3.37 7 

SC25119 St. Croix Pony 1 40 PR $3.76 $3.58 7 

Horseshoes (Toe Weight) STEEL 

1TW Diam Toe Weight 1 10 PR $16.05 $15.25 7 



Horseshoes (Rim) STEEL 

SC11210 St. Croix Lite Rim 3x0 20 PR $4.10 $3.90 8 

SC11211 St. Croix Lite Rim 2x0 20 PR $4.10 $3.90 8 

SC11212 St. Croix Lite Rim 0 20 PR $4.10 $3.90 8 




SC10210 St. Croix Rim 3x0 20 PR $4.43 $4.21 8 

SC10211 St. Croix Rim 2x0 20 PR $4.43 $4.21 8 

SC10212 St. Croix Rim 0 20 PR $4.43 $4.21 8 




SC13220 St. Croix Ultra Lite Rim 3x0 20 PR $5.46 $5.19 8 

SC13221 St. Croix Ultra Lite Rim 2x0 20 PR $5.46 $5.19 8 

SC13222 St. Croix Ultra Lite Rim 0 20 PR $5.46 $5.19 8 



Horseshoes (Equi-Librium) STEEL 

Mustad 

MUEL20F Mustad 2x0 Fr 10 PR $9.24 $8.77 8 

MUEL0F Mustad 0 Fr 10 PR $9.24 $8.77 8 

MUEL1F Mustad 1 Fr 10 PR $9.24 $8.77 8 

MUEL2FC Mustad 2 Fr Clipped 10 PR $11.24 $10.68 8 



Thoro’Bred Pleasure STEEL 

3SPF4 TB Pleasure Steel 4 Fr *S/O 10 SET/4 $8.10 $7.70 8 



3SPH4 TB Pleasure Steel 4 Hd *S/O 10 SET/4 $8.10 $7.70 8 



Horseshoes (Therapeutic) STEEL 


NBS2X0F Nat. Balance 2x0 Fr 10 PR $8.60 $8.17 9 

NBS0F Nat. Balance 0 Fr 10 PR $8.95 $8.50 9 





Case Price 




NBS2X0H Nat. Balance 2x0 Hd 10 PR $8.10 $7.70 9 

NBS0H Nat. Balance 0 Hd 10 PR $8.10 $7.70 9 




NBS4H 

TFT Navicular 

Nat. Balance 4 Hd 10 PR $10.00 $9.50 9 

TFT20 TFT Navicular Steel 2x0 15 PR $23.30 $22.14 9 

TFT0 TFT Navicular Steel 0 15 PR $23.30 $22.14 9 



Horseshoes (Egg Bar) STEEL 

Delta 

DEBP2X0 Delta Egg Bar 2x0 10 PR $16.09 $15.29 9 

DEBP0 Delta Egg Bar 0 10 PR $16.09 $15.29 9 




DCEBP2X0 Delta Egg Bar SC 2X0 10 PR $18.56 $17.64 9 

DCEBP0 Delta Egg Bar SC 0 10 PR $18.56 $17.64 9 




DCEBP4 

FPD SX8 

Werkman Egg Bar SC 4 10 PR $27.33 $25.97 9 

EBS8F-20 FPD SX8 Egg Bar Front QC 2x0 5 PR $20.73 $19.70 9 

EBS8F-0 FPD SX8 Egg Bar Front QC 0 5 PR $20.73 $19.70 9 





EBS8H-2x0 FPD SX8 Egg Bar Hind QC 2x0 5 PR $20.73 $19.70 9 

EBS8H-0 FPD SX8 Egg Bar Hind QC 0 5 PR $20.73 $19.70 9 





SBS8F0 FPD SX8 Straight Bar Front QC 0 5 PR $20.73 $19.70 9 




Horseshoes (Sliding) STEEL 

Kerckhaert Pride 

0SP1 Kerck Sliding 0 1” 15 PR $7.51 $7.14 10 

1SP1 Kerck Sliding 1 1“ 15 PR $7.51 $7.14 10 

2SP1 Kerck Sliding 2 1” 15 PR $7.51 $7.14 10 

0SP1.25TH Kerck Sliding 0 1x1/4” Tapered 15 PR $10.58 $10.06 10 

1SP1.25TH Kerck Sliding 1 1x1/4” Tapered 15 PR $10.58 $10.06 10 

2SP1.25TH 

EDSS TK Sliders 

Kerck Sliding 2 1x1/4” Tapered 15 PR $10.58 $10.06 10 

TKR-000 TK Sliders 3x0 PR $10.30 10 

TKR-00 TK Sliders 2x0 PR $10.30 10 

TKR-0 TK Sliders 0 PR $10.30 10 

TKR-1 TK Sliders,1 PR $10.30 10 

Werkman Sliding Plate 

WSP12X0 Werk Sliding Plate 2x0 1/4x1” 10 PR $9.90 $9.40 10 

WSP10 Werk Sliding Plate 0 1/4x1” 10 PR $9.90 $9.40 10 




WSP1TH0 Werk Sliding Plate 0 1/4x1” Tapered 10 PR $11.40 $10.83 10 



WSP1.250 Werk Sliding Plate 0 1/4x1-1/4” 10 PR $9.90 $9.40 10 



WSP1.253 Werk Sliding Plate 3 1/4x1-1/4 10 PR $9.90 $9.40 10 

WSP1.25TH1 Werk Sliding Plate 1 1/4x1-1/4” Tapered 10 PR $11.40 $10.83 10 

WSP1.25TH2 Werk Sliding Plate 2 1/4x1-1/4” Tapered 10 PR $11.40 $10.83 10 

Horseshoes (Draft) STEEL 

5WHF2810 Kerck WH 5 Fr 28x10mm LIGHT 10 PR $14.25 $13.54 10 




5WHH2810 Kerck WH 5 Hd 28x10mm LIGHT 10 PR $14.25 $13.54 10 

133


Case Price 


Horseshoes (Draft Clipped) STEEL - continued 




5WHF2810T Kerck WH TC 5 Fr 28x10mm LIGHT 10 PR $14.25 $13.54 10 




5WHH2810T Kerck WH TC 5 Hd 28x10mm LIGHT 10 PR $14.25 $13.54 10 




3WHF2812T Kerck WH TC 3 Fr 28x12mm HEAVY 10 PR $14.09 $13.39 10 






3WHH2812T Kerck WH TC 3 Hd 28x12mm HEAVY 10 PR $14.09 $13.39 10 






Horseshoes (Rubber) 

SW4X0 Smooth Walker 4x0 *S/O PR $24.95 11 

SW3X0 Smooth Walker 3x0 *S/O PR $24.95 11 

SW2X0F Smooth Walker 2x0 Fr *S/O PR $24.95 11 

SW2X0H Smooth Walker 2x0 Hd *S/O PR $24.95 11 

SW0F Smooth Walker 0 Fr *S/O PR $24.95 11 

SW0H Smooth Walker 0 Hd *S/O PR $24.95 11 





SW2F-S Smooth Walker 2 Fr Short *S/O PR $24.95 11 

SW2H-P Smooth Walker 2 Hd Pointed *S/O PR $24.95 11 

SW2H-PS Smooth Walker 2 Hd Pointed Short *S/O PR $24.95 11 

SW2H-S Smooth Walker 2 Hd Short *S/O PR $24.95 11 








SW4-S Smooth Walker 4 Short *S/O PR $29.95 11 



SW5H-T Smooth Walker 5 Hd Thin *S/O PR $34.95 11 




SW7F-N Smooth Walker 7 Fr Narrow *S/O PR $42.95 11 

SW7F-NS Smooth Walker 7 Fr Narrow Short *S/O PR $42.95 11 





Horseshoes (Wide Web) Aluminum 

Denoix Series (Therapeutic) 

JMDCFA-5 Denoix Collateral A Front AL 00 *S/O EA $18.85 12 






JMDCHA-5 Denoix Collateral A Hind AL 00 *S/O EA $18.85 12 






JMDCFB-5 Denoix Collateral B Front AL 00 *S/O EA $18.85 12 




134 

Case Price 




JMDCHB-5 Denoix Collateral B Hind AL 00 *S/O EA $18.85 12 






JMDSF-5 Denoix Suspensory Front AL 00 *S/O EA $18.85 12 






JMDSHC-5 Denoix Suspensory Hind AL 00 *S/O EA $27.20 12 






JMDRF-5 Denoix Reverse Front AL 00 *S/O EA $20.70 12 






Natural Balance, Aluminum 

4NBS00 Nat. Balance AL 2x0 10 PR $16.30 $15.49 12 

4NBS0 Nat. Balance AL 0 10 PR $16.30 $15.49 12 





Natural Balance PLR, Aluminum 

NBPLR-F20 Nat. Balance AL PLR 2x0 10 PR $18.50 $17.58 12 

NBPLR-F0 Nat. Balance AL PLR 0 10 PR $18.50 $17.58 12 





Natural Balance PLR, Aluminum Wedged 

NBPLR-W20 Nat. Balance AL PLR Wedged 2x0 10 PR $18.50 $17.58 12 

NBPLR-W0 Nat. Balance AL PLR Wedged 0 10 PR $18.50 $17.58 12 





Horseshoes (Wide Web) Aluminum 

St. Croix Eventer, Aluminum Clipped 

SC19841 St. Croix AL Eventer F/C 2x0 10 PR $11.08 $10.53 13 

SC19842 St. Croix AL Eventer F/C 0 10 PR $11.08 $10.53 13 





SC19941 St. Croix AL Eventer H/C 2x0 10 PR $11.08 $10.53 13 

SC19942 St. Croix AL Eventer H/C 0 10 PR $11.08 $10.53 13 




Victory Elite, Aluminum 

010 Elite AL Flat 2x0 Extra Small 10 PR $10.83 $10.29 13 

012 Elite AL Flat 0 Small 10 PR $10.83 $10.29 13 

013 Elite AL Flat 0-1/2, Small+ 10 PR $10.83 $10.29 13 

014 Elite AL Flat 1 Medium 10 PR $10.83 $10.29 13 

015 Elite AL Flat 1-1/2 Medium+ 10 PR $10.83 $10.29 13 

016 Elite AL Flat 2 Large 10 PR $10.83 $10.29 13 

018 Elite AL Flat 3 Extra Large 10 PR $10.83 $10.29 13 

020 Elite AL Wedge 2x0 (2 degree) XS 10 PR $11.18 $10.63 13 

022 Elite AL Wedge 0 (2 degree) Sm 10 PR $11.18 $10.63 13 

023 Elite AL Wedge 0-1/2 (2 degree) Sm 10 PR $11.18 $10.63 13 

024 Elite AL Wedge 1 (2 degree) Med 10 PR $11.18 $10.63 13 

025 Elite AL Wedge 1-1/2 (2 degree) Med 10 PR $11.18 $10.63 13 

026 Elite AL Wedge 2 (2 degree) Lg 10 PR $11.18 $10.63 13 

Kerckhaert Triumph, Aluminum 

30TAF Kerck Triumph AL 3x0 Fr 15 PR $9.29 $8.83 13 

20TAF Kerck Triumph AL 2x0 Fr 15 PR $9.29 $8.83 13 



Case Price 


Kerckhaert Triumph, Aluminum - continued 

0TAF Kerck Triumph AL 0 Fr 15 PR $9.29 $8.83 13 

1TAF Kerck Triumph AL 1 Fr 15 PR $9.29 $8.83 13 

2TAF Kerck Triumph AL 2 Fr *S/O 15 PR $9.95 $9.46 13 

3TAF Kerck Triumph AL 3 Fr *S/O 15 PR $9.95 $9.46 13 

Kerckhaert Triumph, Aluminum Clipped 

30TAFC Kerck Triumph AL S/C 3x0 Fr 15 PR $10.85 $10.31 13 

20TAFC Kerck Triumph AL S/C 2x0 Fr 15 PR $10.85 $10.31 13 

0TAFC Kerck Triumph AL S/C 0 Fr 15 PR $10.85 $10.31 13 




Horseshoes (Wide Web Wedged) Aluminum 

GEOHW00 GE KB 2 Degree Open Wedge AL 2x0 PR $21.96 13 

GEOHW0 GE KB 2 Degree Open Wedge AL 0 PR $23.07 13 



Horseshoes (Racing) Aluminum 

1RTF3 Thoro’Bred Reg Toe 3 Fr 10 SET/4 $11.85 $11.26 14 





1RTF8 Thoro’Bred Reg Toe 8 Fr *S/O 10 SET/4 $12.40 $11.78 14 

1RPH3 Thoro’Bred Reg Pl 3 Hd 10 SET/4 $11.85 $11.26 14 





1RPH8 Thoro’Bred Reg Pl 8 Hd *S/O 10 SET/4 $12.40 $11.78 14 

1QPF3 Thoro’Bred Queens Plate 3 Fr 10 SET/4 $11.85 $11.26 14 





1QPF8 Thoro’Bred Queens Plate 8 Fr *S/O 10 SET/4 $12.40 $11.78 14 

1QPH3 Thoro’Bred Queens Plate 3 Hd 10 SET/4 $11.85 $11.26 14 





1QPH8 Thoro’Bred Queens Plate 8 Hd *S/O 10 SET/4 $12.40 $11.78 14 

Horseshoes (Egg Bar) Aluminum 

KB Egg Flat 

GEKB00 KB Egg AL 00 PR $24.15 14 





GEKB4 

KB Egg Wedge 

KB Egg AL 4 PR $28.97 14 

GEKBW00 KB Egg Wedge AL 00 PR $30.26 14 






KB Egg Navicular 

GEKBN00 KB Navicular Egg AL 00 PR $34.46 14 






Hoof Stands, Shoeing Boxes 

CCR C. Carroll Cradle for Hoof Stands EA $15.95 15 

CCDSTAND C. Carroll Hoof Stand, Disc Style EA $165.00 15 

CCLSTAND C. Carroll Hoof Stand, Leg Style EA $133.50 15 

HJHST-C Hoof Jack Stand-Combo EA $248.00 15 

HJDC Hoof Jack Draft Cradle Only EA $70.00 15 

HJHST-M Hoof Jack Stand-Mini EA $160.00 15 

HJHST-R Hoof Jack Stand-Standard EA $192.00 15 

0241 NC Adj. Hoof Stand w/Caddy EA $136.00 15 

NCSBT.2 NC Tall Shoeing Box EA $245.00 15 

HI.HSD Hoof-it® Draft Hoof Stand EA $199.00 15 

HI.HSS Hoof-it® Standard Hoof Stand EA $179.00 15 

6SH90 TB Shoe Box, Model 90 *S/O EA $159.50 15 


Case Price 


6SHL TB Shoe Box, Large, 24x12x2 *S/O EA $112.45 15 

6SHS TB Shoe Box, Small, 13x8x10 *S/O EA $101.80 15 

YCSB Yoder Cricket Shoeing Box EA $215.00 15 

YDSB Yoder Deluxe Shoeing Box EA $220.00 15 

YLSB Yoder Classic Shoeing Box EA $225.00 15 

YSSB Yoder Shorty Shoeing Box EA $215.00 15 

Easyboot Horse Boots 

EBGL-00 Easyboot Glove, 00 EA $67.00 16 

EBGL-00.5 Easyboot Glove, 00.5 EA $67.00 16 









EBGL-4 

Vet Wrap 

Easyboot Glove, 4 EA $67.00 16 

VW4BK Vet Wrap Black 4” 3M 18 EA $2.46 $1.71 16 

VW4BL Vet Wrap Blue 4” 3M 18 EA $2.46 $1.71 16 

VW4GR Vet Wrap Green 4” 3M 18 EA $2.46 $1.71 16 

VW4OR Vet Wrap Orange 4” 3M 18 EA $2.46 $1.71 16 

VW4PK Vet Wrap Pink 4” 3M 18 EA $2.46 $1.71 16 

VW4PR Vet Wrap Purple 4” 3M 18 EA $2.46 $1.71 16 

VW4RD Vet Wrap Red 4” 3M 18 EA $2.46 $1.71 16 

VW4WT Vet Wrap White 4” 3M 18 EA $2.46 $1.71 16 

Hoof Pads, Bar Wedge 

C1BWP Castle Bar Wedge #1 10 PR $2.95 $2.80 17 




C1BWF Castle Bar Wedge w/Frog Support #1 10 PR $7.05 $6.70 17 



Hoof Pads, Full Wedge 

C2FWP Castle Full Wedge Plastic #2 10 PR $3.20 $3.04 17 



C2FWUP Castle Full Wedge Urethane #2 10 PR $4.40 $4.18 17 



Hoof Pads, Wedge Degree 

C1DWP Castle Wedge 1-Deg 10 PR $4.25 $4.04 17 

C2DWP Castle Wedge 2-Deg Plastic 10 PR $3.20 $3.04 17 

C2DBWUP Castle Wedge 2-Deg Urethane 10 PR $4.60 $4.37 17 

CH2WL Curtis Hamilton 2-Degree Wedge, Long 10 PR $4.83 $4.59 17 

CH3W Curtis Hamilton 3-Degree Wedge 10 PR $7.52 $7.15 17 

Hoof Pads, Oval Degree 

C1DO Castle Oval 1-Deg 10 PR $3.95 $3.75 17 

C2DOP Castle Oval 2-Deg 10 PR $3.95 $3.75 17 

C3DOP Castle Oval 3-Deg 10 PR $4.40 $4.18 17 

C153DP Castle Oval 3-Deg #15 10 PR $8.40 $7.98 17 

C112DP Castle Oval 2-Deg #11 10 PR $7.30 $6.94 17 

Hoof Pads, Large Degree 

C2DJP Castle Jumbo 2-Deg 10 PR $5.25 $4.99 17 

C3DJP Castle Jumbo 3-Deg 10 PR $6.10 $5.80 17 

Hoof Pads, Rim 

C10RP Castle Rim #10 IMPAK 10 PR $3.55 $3.37 17 

CRF Castle Rim, Felt 10 PR $1.60 $1.52 17 

CLR Castle Rim, Lg Black Urethane 10 PR $2.45 $2.33 17 

CILRP Castle Rim, Lg IMPAK Green 10 PR $3.30 $3.14 17 

CRP Castle Rim, Plastic 10 PR $1.35 $1.28 17 

CRR Castle Rim, Rubber 10 PR $1.45 $1.38 17 

CRTU Castle Rim, Tan Urethane 10 PR $2.30 $2.19 17 

Hoof Pads, Flat 

C4BF Castle Flat, Black #4 10 PR $3.55 $3.37 18 

C5FP Castle Flat, Black #5 10 PR $4.40 $4.18 18 

C6FP Castle Flat, Black #6 10 PR $5.25 $4.99 18 

C4CFP Castle Flat, Clear #4 10 PR $3.65 $3.47 18 

C5LFP Castle Flat, Lg, #5 IMPAK 10 PR $7.55 $7.17 18 

C4MFP Castle Flat, Med, #4 IMPAK 10 PR $5.85 $5.56 18 

CTB Castle Thin Black 10 PR $2.70 $2.57 18 

CTC Castle Thin Clear 10 PR $2.70 $2.57 18 

FP1 FP #1 Flat 10 PR $3.60 $3.42 18 

FP2 FP #2 Flat 10 PR $3.98 $3.79 18 

135


Case Price 


Hoof Pads, Draft 

ABDS Anvil Brand Draft, Small 10 PR $13.25 $12.59 18 

ABDS-W Anvil Brand Draft, Small Wedge 10 PR $13.80 $13.11 18 

CAFP Castle Arab *S/O 10 PR $4.65 $4.42 18 

CDBFP Castle Draft *S/O 10 PR $11.95 $11.35 18 

Hoof Pads, Leather 

KL4R Leather, #4 Regular PR $7.85 18 

KL6R Leather, #6 Regular PR $9.08 18 

KL4H Leather, #4 Heavy PR $8.34 18 

KL6H Leather, #6 Heavy PR $9.57 18 

KL4XH Leather, #4 Extra Heavy PR $9.99 18 

KL6XH 

Pad Cutter 

Leather, #6 Extra Heavy PR $12.05 18 

DPC Duvall Pad Cutter *S/O EA $275.00 18 

DPCBB Duvall Replacement Bottom Blade *S/O EA $23.00 18 

DPBC Duvall Blade Cover, Leather *S/O EA $8.25 18 

DPCH Duvall Replacement Handle *S/O EA $16.00 18 

DPCTB Duvall Replacement Top Blade *S/O EA $23.00 18 

Heel Springs 

HSS Heel Spring, Small (Blue) EA $7.32 19 

HSM Heel Spring, Medium (Yellow) EA $7.32 19 

HSL Heel Spring, Large (Red) EA $7.32 19 

Hoof Pads, Bar 

C8IAP Castle Absorber #8 IMPAK *S/O 10 PR $6.45 $6.13 19 

C8LIAP Castle Absorber #8 Lg IMPAK *S/O 10 PR $7.95 $7.55 19 

C1SBP Castle Bar #1 IMPAK 10 PR $5.25 $4.99 19 

C2MBP Castle Bar #2 IMPAK 10 PR $5.60 $5.32 19 

Hoof Pads, Cushion Frog 

C2DCF Castle Cush Frog 2-Deg 10 PR $7.10 $6.75 19 

CICFP Castle Cush Frog IMPAK 10 PR $8.80 $8.36 19 

CCFL Castle Cush Frog, Lg 10 PR $7.10 $6.75 19 

CCFS Castle Cush Frog, Sm 10 PR $5.40 $5.13 19 

NBPF-R Natural Balance Frog, Flat Reg (000-1) 10 PR $11.00 $10.45 19 

NBPF-L Natural Balance Frog, Flat Large (2-6) 10 PR $13.90 $13.20 19 

NBPW-R Natural Balance Frog, Wedge Reg (000-1) 10 PR $11.00 $10.45 19 

NBPW-L Natural Balance Frog, Wedge Large (2-6) 10 PR $13.90 $13.20 19 

Hoof Pads, Cushion Heel 

CCH Castle Cush Heel #4 10 PR $4.40 $4.18 19 

Hoof Pads, Egg Bar Frog 

C2EBS Castle Egg Bar 2-Deg, Sm 10 PR $7.10 $6.75 19 

CEBL Castle Egg Bar Lg 10 PR $7.10 $6.75 19 

CEB Castle Egg Bar Reg 10 PR $6.10 $5.80 19 

MMPS Myron Mclaine Small PR $17.96 19 

MMPM Myron Mclaine Medium PR $17.96 19 

MMPL Myron Mclaine Large PR $17.96 19 

Hoof Pads, Egg Bar Wedge 

C122DOWP Castle Open Wedge #12 IMPAK 10 PR $7.05 $6.70 19 

Hoof Pads, Pour 

CPP Castle Pour 10 PR $2.70 $2.57 19 

Hoof Pads, Thera Flex 

TFP1 Thera-Flex Pad #1 PR $21.72 19 




Hoof Pads, Hospital Kits 

CHPL Castle Hospital Large *S/O 10 PR $9.50 $9.03 20 

CHPS Castle Hospital Small *S/O 10 PR $9.05 $8.60 20 

Hoof Pads, Lily 

LILYP Lily Pads PR $21.93 20 

Hoof Pads, Magnetic 

CMP Castle Magnetic 10 PR $20.50 $19.48 20 

Hoof Pads, Snow 

C2DS Castle Sno Ball 2 Deg 10 PR $5.95 $5.65 20 

C2DLS Castle Sno Ball 2 Deg Large 10 PR $8.20 $7.79 20 

CDS Castle Sno Ball Draft 10 PR $13.30 $12.64 20 

CSL Castle Sno Ball Large 10 PR $6.10 $5.80 20 

CSR Castle Sno Ball Regular 10 PR $3.90 $3.71 20 

CSRBF Castle Sno Rim, Black Fr Urethane 10 PR $7.60 $7.22 20 

CSRBH Castle Sno Rim, Black Hd Urethane 10 PR $7.60 $7.22 20 

CSRCF Castle Sno Rim, Clear Fr Urethane 10 PR $8.05 $7.65 20 

CSRLC Castle Sno Rim, Clear Fr Urethane Large 10 PR $8.05 $7.65 20 

CSRCH Castle Sno Rim, Clear Hd Urethane 10 PR $8.05 $7.65 20 

Hoof Pads, Therapeutic 

C4P Castle Performance #4 (3/16”) 10 PR $7.55 $7.17 20 

C4.25P Castle Performance #4 (1/4”) 10 PR $8.40 $7.98 20 

C5P Castle Performance #5 (3/16”) 10 PR $9.25 $8.79 20 

SF600-SM Styrofoam Support Pad Sm (00-0) 4 SET $11.00 $10.45 20 

136 

Case Price 


SF600-MD Styrofoam Support Pad Med (1-2) 4 SET $11.00 $10.45 20 

SF600-LG Styrofoam Support Pad Lg (3) 4 SET $11.00 $10.45 20 

SF603-XL Styrofoam Support Pad XL (4) 4 SET $11.00 $10.45 20 

Anti-Fungal Remedies 

HPT Hawthorne Pine Tar 16 oz EA $5.40 21 

TB Mustad Thrushbuster 2 oz EA $13.29 21 

WHLTG30 White Lightning Gel 30 ml EA $17.00 21 

WHLT White Lightning 8 oz EA $12.50 21 

Hoof Staples 

HS14 Hoof Staple 1/4 in EA $4.05 21 



Hoof and Crack Repair 

BFBG-40 Bond-n-Flex Beige 40ml 24 EA $11.10 $10.55 21 

BFBG-200 Bond-n-Flex Beige 200ml 12 EA $28.00 $26.60 21 

BFBL-40 Bond-n-Flex Black 40ml 24 EA $11.10 $10.55 21 

BFBL-200 Bond-n-Flex Black 200ml 12 EA $28.00 $26.60 21 

BFG-40 Bond-n-Flex Mixing Gun 40ml EA $29.00 21 

BFG-200 Bond-n-Flex Mixing Gun 200ml EA $37.00 21 

BFT-40 Bond-n-Flex Mixing Tip 40ml 500 EA $0.85 $0.81 21 

BFT-200 Bond-n-Flex Mixing Tip 200ml 100 EA $1.50 $1.43 21 

HRKP Kwik Poly 16 oz EA 50.91 21 

46155 Vettec Adhere, Beige 180cc 12 EA $33.30 $31.63 22 

46150 Vettec Adhere, Black 180cc 12 EA $33.30 $31.63 22 

46153 Vettec Adhere, Black 50cc 12 EA $20.00 $18.84 22 

46025 Vettec Adhesive Spacers 50 EA $0.10 $0.06 22 

46020 Vettec Applicator Blades 12 EA $0.05 $0.04 22 

46906 Vettec Caps 180cc 12 EA $0.65 $0.55 22 

46902 Vettec Dispensing Gun 180cc EA $57.25 22 

46908 Vettec Dispensing Gun (Premium) 180cc EA $86.70 22 

46118 Vettec Equi-Pak Soft, 180cc EA $28.05 22 

46901 Vettec Mix Tips,180cc (100/$.50) 12 EA $1.06 $1.00 22 

46930 Vettec Mix Tips, 50cc 12 EA $0.82 $0.78 22 

46140 Vettec Super Fast 180cc 12 EA $33.30 $31.63 22 

46143 Vettec Super Fast 50cc 12 EA $20.00 $18.84 22 

Hoof Packing 

SSIM1.5 EDSS Sole Support (Blue) 1.5 lb 12 SET $40.00 $38.00 23 

SSIM1.5P EDSS Sole Support (Pink) 1.5 lb 12 SET $40.00 $38.00 23 

HSPP Hawthorne Sole Pack Paddies EA $2.70 23 

HSP4 Hawthorne Sole Pack 4 lb EA $49.50 23 

HSP8 Hawthorne Sole Pack 8 lb EA $94.00 23 

Oakum-1 Oakum, Treated 1 lb pkg 5 PKG $7.50 $7.13 23 

Oakum-5 Oakum, Treated 5 lb box 5 BOX $24.00 $22.80 23 

46126 Vettec Equi-Build Fast 180cc 12 EA $27.05 $25.70 23 

46122 Vettec Equi-Pak Copper Sulfate 180 cc 12 EA $31.25 $29.69 23 

46121 Vettec Equi-Pak 180cc 12 EA $28.65 $27.22 23 

46118 Vettec Equi-Pak Soft 180cc 12 EA $28.65 $27.22 23 

46190 Vettec Sil-Pak 180 cc 12 EA $16.65 $15.82 23 

46160 Vettec Sole-Guard 180 cc 12 EA $31.25 $29.69 23 

46094 Vettec Contouring Plastic 10 RL $6.22 $5.91 23 

46030 Vettec Equi-Mesh RL $7.30 23 

46015 Vettec Foam Boards Adhesive 50 EA $0.75 $0.57 23 

46061 Vettec CR Rom Instruction Guide EA $0.00 23 

46090 Vettec Instruction Guide Handbook EA $0.00 23 

Hoof Moisturizers 

960050 Hoofmaker 32 oz EA $11.60 24 

Hoof Sealants, Hardeners 

CRS Crossapol Hoof Hardener 275 ml EA $33.83 24 

HS Delta Hoof Shield 8 oz EA $11.55 24 

HVT Hawthorne Venice Turpentine Pint EA $9.70 24 

TS Tuff Stuff 7.5 oz EA $13.29 24 

Poultices, Liniments 

199 DMSO Roll-on 2 oz EA $4.85 25 

960150 Mineral Ice-Straight Arrow 1 lb 6 EA $9.95 $9.45 25 

330 Poultice/Cataplasm-Numotizine 24 oz EA $31.35 25 

331 Poultice/Cataplasm-Numotizine 3 lb *S/O EA $41.00 25 

760105 Poultice/Antiphlogistine 5 lb *S/O EA $36.00 25 

890550 

Polishes 

Reducine Absorbent 1 lb EA $22.55 25 

180372 Lasersheen Concentrate 12 oz EA $17.99 25 

Antiseptics/First Aid 

420010 Blu Kote w/dauber 4 oz 12 EA $6.10 $5.79 26 

180 Cut Heal Liquid w/ dauber 8 oz EA $14.20 26 

08 Fura Septin 1 lb EA $11.20 26 

790100 Granulex V Aerosol 4 oz *S/O EA $29.30 26 

Fly Spray, Insecticides and Masks 

180455 Farnam Fly Repellent Roll-on EA $7.85 26 



Case Price 


80500 Poultry Garden Dust 2 lb EA $8.25 26 

440 Pyranha Fly Spray Qt EA $17.25 26 

180605 Horse Super Mask II, Horse Size EA $21.25 26 

180606 Horse Super Mask II, Yearling Size EA $21.25 26 

180607 Horse Super Mask II, Arab Size EA $21.25 26 

180608 

Vaccines 

Horse Super Mask II, Foal/Pony Size EA $21.25 26 

30790 Cannine 7 Way, 1 dose kit EA $6.90 26 

530170 Cattle 7 Way, 1 dose kit EA $6.60 26 

210540 Innovator 4, 1 dose kit EA $23.40 26 

100230 

Wormers 

Rhino and Influenza, 1 dose kit EA $31.20 26 

980195 D-Worm Chewable, Sm Dogs EA $7.75 27 

980197 D-Worm Chewable, Lg Dogs EA $7.75 27 

980221 D-Worm Push Tablets, Sm Dogs EA $7.75 27 

0006045 Tape Worm Tabs for Cats (Praziquantel) EA $15.30 27 

HHEIP Horse Health Equine Ivermectin Paste EA $7.70 27 

589-1000 Piperazine (liquid dewormer) 8 oz EA $6.85 27 

910690 Worm Off Tablets, For Birds, Chickens EA $14.25 27 

Feed Supplements 

1101 Equicart 454 gr (90 servings) EA $49.99 27 

620115 Psyllium Pellets (Equi Aid) 5 lb *S/O EA $34.30 27 

900660 Psyllium Pellets (TVS) 5 lb *S/O EA $25.30 27 

586-0260 Red Cell, Qt *S/O 12 EA $10.20 $9.69 27 

586-0270 Red Cell, Gal *S/O 4 EA $27.50 $26.13 27 


PTC-FA.SR Pieh Apron Suede Farrier Rust 27” EA $200.00 28 

PTC-FA.SR-SKP Pieh Farrier Apron w/2 Straight Knife Pockets EA $200.00 28 

PTC-FA.ST Pieh Apron Suede Farrier Tan 26” EA $160.00 28 

PTC-FA.2MS-BS 2” Magnets sewn on L&R Sides of PTC Apron EA $21.00 28 

PTC-FA.2MS-LS 2” Magnets sewn on L Side of PTC Apron EA $10.50 28 

PTC-FA.2MS-RS 2” Magnets sewn on R Side of PTC Apron EA $10.50 28 

PTC-FA.3MS-BS 3” Magnets sewn on L&R Sides of PTC Apron EA $26.00 28 

PTC-FA.3MS-LS 3” Magnets sewn on L Side of PTC Apron EA $10.50 28 

PTC-FA.3MS-RS 3” Magnets sewn on R Side of PTC Apron EA $13.00 28 

PTC-FA-INCH Increase Apron Length (per inch) IN $4.00 28 

GALFM Gibbins Apron Flame Master Long EA $236.00 29 

GAFN Gibbins Apron Flame Master Short EA $225.00 29 

GALT Gibbins Apron Tear-Away Long EA $327.00 29 

GSTAPR Gibbins Apron Tear-Away Short EA $299.00 29 

GAB Gibbins Apron Wrap Around Long EA $364.00 29 

GBLAKEL Gibbins Apron Blake Long EA $332.00 29 

GBLAKES Gibbins Apron Blake Short EA $304.00 29 

GAF Gibbins Repl. Tenax Fasteners EA $13.88 29 

HI.FA Hoof-it Farrier Apron, 28” EA $49.00 29 

0243 NC Apron Cordura Camouflage Med EA $120.00 29 

SDBS Super Dura Apron Burgundy Short EA $110.00 29 

SDGRL Super Dura Apron Grey Long EA $110.00 29 

SDGS Super Dura Apron Grey Short EA $110.00 29 

SDGM Super Dura Apron Green Med EA $110.00 29 

SDGL Super Dura Apron Green Long EA $110.00 29 

SDNS Super Dura Apron Navy Short EA $110.00 29 

Hoof Knives 

40003 Double S Classic Knife RH EA $34.80 30 

40004 Double S Classic Knife LH EA $34.80 30 

171NLH Frost 171 Narrow LH Knife EA $15.29 30 

171NRH Frost 171 Narrow RH Knife EA $15.29 30 

180LH Frost 180 Wide LH Knife EA $15.29 30 

180RH Frost 180 Wide RH Knife EA $15.29 30 

HCBK-L Hall Curved Blade Knife LH EA $32.00 30 

HCBK-R Hall Curved Blade Knife RH EA $32.00 30 

HDBK-L Hall Drop Blade Knife LH EA $38.15 30 

HDBK-R Hall Drop Blade Knife RH EA $38.15 30 

HOSK-L Hall Off Set Knife LH EA $38.60 30 

HOSK-R Hall Off Set Knife RH EA $38.60 30 

JH-DBL JH Deep Belly Long Handle Hoof Knife w/ Pick LH EA $88.00 30 

JH-DBR JH Deep Belly Long Handle Hoof Knife w/ Pick RH EA $88.00 30 

JH-DBR.S JH Deep Belly Short Handle Hoof Knife w/ Pick RH EA $88.00 30 

PTBKLH Pieh Bonnie LH Knife EA $31.00 30 

PTBKLHL Pieh Bonnie LH Long Knife EA $32.00 30 

PTBKRH Pieh Bonnie RH Knife EA $31.00 30 

PTBKRHL Pieh Bonnie RH Long Knife EA $32.00 30 

RSLH (E) Ringel (Straight) Knife LH EA $108.00 30 

RSRH (E) Ringel (Straight) Knife RH EA $108.00 30 

RMOL (E) Ringel Mini Offset Knife LH EA $108.00 30 

RMOR (E) Ringel Mini Offset Knife RH EA $108.00 30 

ROLH (E) Ringel Offset Knife LH EA $108.00 30 


Case Price 


RORH (E) Ringel Offset Knife RH EA $108.00 30 

ROWR (E) Ringel Offset Wide Knife RH EA $108.00 30 

ROWR-E Ringel Offset Wide Knife RH, Elk Handle EA $123.00 30 

VRBLH Victorinox LH Knife EA $29.78 30 

VRBRH Victorinox RH Knife EA $29.78 30 

Double-Edge Knives 

188RH Frost 188 Double Edge RH Knife EA $19.61 30 

RADE Ringel Abscess Knife (Dbl Edge) EA $98.00 30 

RADE(E) Ringel Abscess Knife w/Elk Handle *S/O EA CALL 30 

VDEBLH Victorinox Double Edge LH Knife EA $33.71 30 

VDEBRH 

Loop Knives 

Victorinox Double Edge RH Knife EA $33.71 30 

ABloop AB Loop Knife EA $14.00 30 

HAKL Hall Abscess Knife-Large EA $42.00 30 

HAKS Hall Abscess Knife-Small EA $42.00 30 

HLoop Hall Loop Knife EA $41.50 30 

JH-LOOP.CL JH Forge Classic Loop Knife w/Pick EA $108.00 30 

PTBLK Pieh Billy, Loop Knife EA $36.00 30 

PTLR-R Pieh Loop Ring Knife (Hoof Parer) EA $18.00 30 

RLK3 (E) Ringel Loop Knife (1/2”) EA $130.00 30 

RLK2 (E) Ringel Loop Knife (1”) EA $130.00 30 

RLK1 (E) Ringel Loop Knife (1-3/8”) EA $130.00 30 

RLK4 (E) Ringel Loop Knife (1-1/2”) EA $130.00 30 

JCLOOP Soundmount Loop Knife EA $30.00 30 

Trail and Combo Knife 

PT5BL Pieh Utility Knife 5 Tools EA $19.00 30 

Farrier Rasps *Simonds now called Heller 

BCR Bellota Classic Rasp 14” 6 EA $22.85 $21.71 31 

BTSR Bellota Top Sharp Rasp 14” 6 EA $22.85 $21.71 31 

SBHR Heller Big Hoof Rasp 18” 5 EA $30.90 $29.36 31 

SBHL Heller Black Legend Rasp 14” 5 EA $38.43 $36.51 31 

SBR Heller Black Master Rasp 14” 5 EA $31.20 $29.64 31 

SHL Heller Legend Rasp 14” 5 EA $27.05 $25.70 31 

SRTR Heller Red Tang Rasp 14” 5 EA $27.05 $25.70 31 

18155N Nicholson Farrier Handy Rasp/File 14” 5 EA $21.95 $20.85 31 

HR14 Nicholson Horse Rasp & File 14” 6 EA $21.95 $20.85 31 

18130 Nicholson Platers Magicut Rasp 14” 6 EA $21.95 $20.85 31 

SERP Save Edge Rasp 14” 6 EA $25.00 $23.75 31 

SEBR-14 Save Edge Beast Rasp 14” 6 EA $30.95 $29.40 31 

SEBR-17 Save Edge Beast Rasp 17” 6 EA $34.00 $32.30 31 

VR14 Vallorbe Spirit Rasp,14” 5 EA $41.25 $39.19 31 

Farrier Finishing Files 

SBMFF Heller Black Master Finish File 14” 5 EA $30.08 $28.58 31 

SMFF Heller Master Finish File 14” 5 EA $26.43 $25.11 31 

SEFR Save Edge Finish File 14” 6 EA $26.75 $25.41 31 

Metal Files 

16507 Nich Bastard Cut Warding File 4” EA $9.00 31 

14729N Nich Extra Slim Taper File 8” EA $6.80 31 

07917 Nich Flat Magicut File 10” EA $13.05 31 

07894 Nich Flat Magicut File 8” EA $10.10 31 

03863 Nich Flat Bastard File 14” EA $21.45 31 

02215 Nich Flat Chain Saw File 8” EA $9.20 31 

05190 Nich Half Round Pipeliner File EA $19.30 31 

08354 Nich Mill Bastard File 6” EA $5.00 31 

01630 Nich Round Chain Saw File 6” EA $3.95 31 

01888 Nich Round Chain Saw File 8” EA $3.95 31 

S6V2RE Simonds Veneer File 6” EA $6.60 31 

S8V2RE Simonds Veneer File 8” EA $8.07 31 

File & Rasp Handles 

BRH Bellota Wood Rasp Handle EA $4.80 32 

ALRHL FPD Alum Rasp Handle Large EA $17.34 32 

ALRH FPD Alum Rasp Handle Medium EA $17.34 32 

PARH Pieh Alum Rasp Handle Large EA $26.00 32 

PARHS Pieh Alum Rasp Handle Small EA $26.00 32 

SERH Save-Edge Plastic Rasp Handle EA $9.51 32 

FHDO3 Wood Screw-On File Handle for 3-6” EA $4.85 32 

TG3 Wood Screw-On File Handle for 6-8” EA $4.85 32 

TG4 Wood Screw-On File Handle 10-18” EA $5.10 32 

Rasp Holders 

JVRH JV Alum Rasp Holder Vinyl Lined EA $20.25 32 

NCRH 

File Cleaner 

NC Plastic Rasp Holder EA $7.75 32 

21467 

Ruler 

Nich File Card and Brush EA $14.00 32 

WHR 

Sand Bar 

W-Brand Shoers Ruler EA $21.00 32 

SANDBAR Sand Bar EA $1.95 32 

137


Case Price 

Item# 

Farrier Kit 

Description Qty U/M Price Break Pg 

5050 Nordic Prof Hoof Trimming Kit EA $184.00 32 

Nail Nippers 

BNC9 Bellota Nail Cutter 9” EA $27.23 32 

N10 Diam Nail Nipper, 10” EA $42.30 32 

WKN8 Knipex Nail Nipper, 8” EA $32.00 32 

Hoof Nippers and Accessories 

FN12 Diamond Nipper 12” EA $99.70 32 

FN15 Diamond Nipper 15” EA $104.40 32 

14D Diamond Nipper 14” (Plastic coated reins) EA $40.30 32 

DS14 DS Nipper 14” EA $173.00 32 

DS15 DS Nipper 15” EA $173.00 32 

DS16 DS Nipper 16” EA $173.00 32 

DSRT12 DS Race Track Nipper 12” EA $173.00 32 

DSRT14 DS Race Track Nipper 14” EA $173.00 32 

GE12HRN GE Half Round Nipper 12” EA $246.00 33 

GE12N GE Nipper 12” EA $216.00 33 

GE12N-EZ GE Nipper-Easy 12” EA $221.00 33 





GE14RTN GE Race Track Nipper 14” EA $221.00 33 

LFT4004 Lopez Nipper 14” EA $188.00 33 

LFT4007 Lopez Nipper 15” EA $188.00 33 

NFJP12P Nordic Viking Nipper 12” (polished) EA $96.50 33 

NFJP12SP Nordic Viking Nipper 12” EA $71.50 33 

NFJP15P Nordic Viking Nipper 15” (polished) EA $107.25 33 

NFJP15SP Nordic Viking Nipper 15” EA $86.00 33 

PT12N Pieh Hoof Nipper 12’ EA $135.00 33 

PT14N Pieh Hoof Nipper 14” EA $140.00 33 

PT15N Pieh Hoof Nipper 15” EA $140.00 33 

WNS W-Brand Nipper Spring EA $9.75 33 

Tool Rebuild Service 

HoReb Srv Hoehn Rebuild Service-Nippers EA $71.50 33 

HoReb HR Hoehn Rebuilds-Nipper Conversion Half Round EA $105.00 33 

LFR5009 Lopez Rebuild Service-Crease Nail Puller EA $98.00 33 

Crease Nail Pullers 

NP12 Diamond Nail Puller EA $59.50 33 

GECNP GE Crease Nail Puller EA $113.00 33 

LFT4001 Lopez Nail Puller EA $93.00 33 

PTCNP Pieh Crease Nail Puller EA $62.00 33 

Pull Offs/Spreaders 

SP12D Diam Shoe Puller/Spreader EA $68.00 33 

GE12PO GE Pull Off 12” EA $167.00 33 

GE14PO GE Pull Off 14” EA $167.00 33 

NFJP12PO Nordic Viking Puller/Spreader EA $63.00 33 

Shoe Spreaders 

DSSP DS Shoe Spreader EA $115.00 34 

KSS Kulp Shoe Spreader EA $108.00 34 

LFT4014 Lopez Spreader EA $109.00 34 

Hoof Testers 

PTHTL Pieh Hoof Tester Large EA $94.00 34 

PTHTS Pieh Hoof Tester Small EA $68.50 34 

WHT W-Brand Hoof Tester EA $91.00 34 

Hoof Gauges 

0715 Cavalry Hoof Gauge #1 EA $41.25 34 

0715A Cavalry Hoof Gauge #2 EA $49.00 34 

FHG Finnegan Hoof Gauge EA $107.25 34 

PTHGB Pieh Brass Hoof Gauge EA $15.00 34 

RHG Ruidoso Hoof Gauge EA $62.75 34 

WSHP Ward & Story Hoof Gauge EA $54.00 34 

WSHG-RA Ward and Story Repl Arm *S/O EA $15.75 34 

WHE 

Dividers 

W-Brand Hoof Evener EA $10.65 34 

JH-DIV JH Premium Wing Dividers EA $80.00 34 

PTWD Pieh Wing Dividers EA $11.00 34 

Hoof Picks (Also see Combo Knives, page 30) 

PTHPH Pieh Hoof Pick EA $10.50 34 

VF27 Victory Forge Horsehead Hoof Pick EA $20.00 34 

Tooth Float/Twitch 

28975 Dental Float Combo KIT $67.00 34 

23225 

Clinchers 

Twitch, Long Handled with Chain EA $39.00 34 

FC12 Diam Farrier Clincher EA $74.15 34 

PC12 Diam Gooseneck Clincher EA $75.20 34 

HC12 Diam Saddlehorse Clincher EA $67.15 34 

138 

Case Price 


GECJC GE Curved Jaw Clincher EA $167.00 34 

GECJLN GE Curved Jaw Low Nail EA $167.00 34 

LFT4008 Lopez Low Nail Clincher EA $138.00 35 

LFT4002 Lopez Saddlehorse Clincher EA $153.00 35 

LFT4003 Lopez Style Clincher EA $138.00 35 

JBCCJ Blurton Clincher Curved Jaw *S/O EA $192.00 35 

DSGN DS Goose Neck Clincher EA $115.00 35 

DSSHA DS Saddle Horse Alligator Clincher EA $108.00 35 

Tool Rebuild Service 

LFR5008 Lopez Rebuild Clincher EA $98.00 35 

Clinch Cutters 

JBCCGCT Blurton Clinch Cutter/Gouge EA $62.40 35 

C7 Diam Clinch Cutter 6” EA $20.70 35 

GECC GE Clinch Cutter *S/O EA $48.00 35 

PTCC 

Gouges 

Pieh Clinch Cutter EA $22.00 35 

VHG Pieh Hoof Gouge EA $28.05 35 

Clinch Blocks 

CB4 Diam Clinch Block EA $22.00 35 

DSCB DS Clinch Block EA $43.00 35 

Hardies and Chisels 

GECH78 GE Chisel Hardy 7/8” EA $44.00 35 

GECH1 GE Chisel Hardy 1” EA $44.00 35 

GEVH78 GE V Hardy 7/8” EA $44.00 35 

GEVH1 GE V Hardy 1” EA $44.00 35 

PTCH750 Pieh Chisel Hardy 3/4” EA $65.00 35/53 

PTCH875 Pieh Chisel Hardy 7/8”. EA $65.00 35/53 

PTCH100 Pieh Chisel Hardy 1” EA $65.00 35/53 

PTCH125 

Anvil Devil 

Pieh Chisel Hardy 1-1/4” EA $65.00 35/53 

SAD 

Pritchels 

Anvil Devil, 2-1/2x1/2” EA $4.50 35/53 

JBPCH Blurton Pritchel, CH *S/O EA $62.40 35 

JBPE Blurton Pritchel, EH *S/O EA $62.40 35 

P12 Diamond Pritchel EA $13.30 35 

FFP Flatland Forge Pritchel EA $54.00 35 

Center Punches (Farrier) 

CNTRP1 Flatland Forge Center Punch EA $43.00 35/54 

CP000 Pieh Center Punch EA 24.00 35/54 

CPC000 Pieh Pyramid Center Punch S7, 7” EA 24.00 35/54 

Stud and Bob Punches 

SPH1 Flatland Forge Stud Punch 5/16” EA $54.00 35 

Forepunches 

JBSHFCH Blurton Forepunch CH, SH *S/O EA $62.00 36 

JBSHFD Blurton Forepunch D, SH *S/O EA $62.00 36 

JBSHFE Blurton Forepunch EH, SH *S/O EA $62.00 36 

JBSHFJC Blurton Forepunch JC, SH *S/O EA $62.00 36 

CTYP1 Flatland Forge Forepunch CH, WH EA $54.00 36 

EH1 Flatland Forge Forepunch EH, WH EA $54.00 36 

60036 Mustad Forepunch Wood Handled CH EA $80.00 36 

60037 Mustad Forepunch Wood Handled EH EA $84.80 36 

Creasers and Fullers (Farrier) 

JBCWH Blurton Creaser, WH *S/O EA $115.00 36 

FLR2L Flatland Forge Fuller LH Slim, WH EA $105.00 36 

FLR2R Flatland Forge Fuller RH Slim, WH EA $105.00 36 

60038 Mustad Creaser CH *S/O EA $88.00 36 

Clip Starter 

CCCS1 Cliff Carroll Clip Starter EA $19.95 36 

Blacksmith Aprons 

PTC-BA24 Pieh Blacksmith Bib Apron 24” EA 148.00 37 



PTC-BALB Pieh Blacksmith Lap Apron w/Belt EA $64.00 37 

PTC-BALT Pieh Blacksmith Lap Apron w/Ties EA $64.00 37 

26BLA2436 BM Bib Apron, Grey Rawhide 36” EA $32.50 37 

26BLA2442 BM Bib Apron, Grey Rawhide 42” EA $34.50 37 

Knifemaking Apron 

PTC-KM27 

Gloves 

Pieh Knifemaker Bib Apron 27” EA $48.00 37 

174 Hot Mill Gloves PR $5.60 38 

LKVA65285 Kevlar Gloves w/Cuff-Ladies PR $19.00 38 

KVA65285 Kevlar Gloves w/Cuff-Men’s PR $19.00 38 

KV28L Kevlar Knit Gloves-Lg PR $8.65 38 

KV28S Kevlar Knit Gloves-Sm PR $7.75 38 

LKV62104 Kevlar-Jersey Gloves-Ladies PR $15.90 38 

KV62104 Kevlar-Jersey Gloves-Men’s PR $16.00 38 

LKV7244 Kevlar-Terry Gloves-Ladies PR $23.25 38 



Case Price 

Case Price 

Item# Description Qty U/M Price Break Pg Item# Description Qty U/M Price Break Pg 

KV7244J Kevlar-Terry Gloves-Men’s Jumbo PR $24.00 38 TFSTP TFS Tri-Pod Aluminum Stand EA $314.00 42 

Hearing Protection 

Cliff Carrol Stands: Online or catalog price only. *Items for pick up in our store 

RB1150 Radians RAD Band EA $6.85 38 will include added shipping charges. 

CEP001-N Radians Custom Molded Ear Plugs-Natural PR $14.99 38 CCAST Cliff Carroll Anvil Stump EA $259.00 42 

Safety Glasses 

CCS Cliff Carroll Anvil Stand EA $99.00 43 

9300 Didymium Glasses Standard Frame EA $59.00 38 CCASV Cliff Carroll Anvil Stand with Vise EA $176.00 43 

9305 Didymium Glasses Large Frame EA $59.00 38 CCV Cliff Carroll Vise EA $87.00 43 

CV0010 Radians Coveralls Clear EA $4.50 

C2-115 Radians C2 Bi-Focal Safety Glass 1.5 Diopter EA $8.85 




RV0140ID Radians Revelations Amber EA $5.75 

RV0170ID Radians Revelations Blue Mirror EA $6.50 

RV0110ID Radians Revelations Clear EA $5.00 

RV01C0ID Radians Revelations Copper EA $5.75 

RV0180ID Radians Revelations Vermilion EA $5.75 

Anvils (Farrier) 

*Cliff Carroll Anvils: Online or catalog price only. *Items for pick up in our 

store will include added shipping charges. 

CCA35 Cliff Carroll Anvil 35 lb EA $170.00 


CCA70W Cliff Carroll Anvil 70 lb Wide Face EA $306.00 


JHM100 JHM Anvil 100 lb Certifier EA $595.00 

JHM125 JHM Anvil 125 lb Journeyman Square Back EA $729.00 

JHM125TC JHM Anvil 125 lb Journeyman w/Cams EA $689.00 

JHM160 JHM Anvil 160 lb Shaper EA $849.00 

JHM260 JHM Anvil 260 lb Competitor EA $1,300.00 

JHM70 JHM Anvil 70 lb Basic EA $455.00 

JHM85 JHM Anvil 85 lb Bruce Daniels EA $512.00 

38 

38 

38 

38 

38 

38 

38 

38 

38 

38 

40 

40 

40 

40 

40 

40 

40 

40 

40 

40 

40 

NC Stand: Online or catalog price only. *Items for pick up in our store will 

include added shipping charges. 

NCST NC Folding Anvil Stand with Vise EA $285.00 

Vises 

Valley Vises/Stands: Online or catalog price only. *Items for pick up in our 


ABV14 Valley Vise, Gooseneck 14” EA $184.00 

ABV36 Valley Vise, Gooseneck 36” EA $184.00 

TVB Valley Tripod Vise Base EA $94.00 

21400 Wilton Mechanic’s 5” Vise (Model 745, 740 Series) EA $269.00 

21500 Wilton Mechanic’s 6” Vise (Model 746, 740 Series) EA $349.00 

63238 Wilton Model 1335 Drill Press Vise EA $85.00 

63301 Wilton WS5 Shop Vise EA $117.00 

63302 Wilton WS6 Shop Vise EA $184.00 

69999 Wilton Multi-Purpose Vise EA $199.00 

Hammers, Ergonomic Rounding 

HRDH5 Big Blu Rounding Hammer 2.6 lb EA $124.00 

HRDH6 Big Blu Rounding Hammer 3.7 lb EA $125.85 

PTRH2.0 Pieh Ergonomic Rounding Hammer 2 lb EA $105.00 

PTRH2.5 Pieh Ergonomic Rounding Hammer 2.5 lb EA $105.00 

PTRH3.5 Pieh Ergonomic Rounding Hammer 3.5 lb EA $110.00 

PTRH4.0 Pieh Ergonomic Rounding Hammer 4 lb EA $110.00 

Hammers, Ergonomic Cross 

HCPH1 Big Blu Cross Pein Hammer 1.5 lb EA $124.00 

43 

43 

43 

43 

43 

43 

43 

43 

43 

43 

44 

44 

44 

44 

44 

44 

44 

*NC Anvils: Online or catalog price only. *Items for pick up in our store will HCPH2 Big Blu Cross Pein Hammer 2.4 lb EA $124.00 44 

include added shipping charges. 

HCPH3 Big Blu Cross Pein Hammer 3.5 lb EA $125.00 44 

0207 NC Anvil 70 lb Big Face EA $345.00 40 HCPH4 Big Blu Cross Pein Hammer 4.6 lb EA $126.65 44 

0209 NC Anvil 112 lb Cavalry EA $495.00 40 PTCP1.5 Pieh Ergonomic Cross Pien Hammer 1.5 lb EA $105.00 44 

*TFS Anvils: $50 shipping in the continental USA (excluding handling and 

PTCP2.5 Pieh Ergonomic Cross Pien Hammer 2.5 lb EA $108.00 44 

insurance)! See our handling charges in our Terms. *Items for pick up in our PTCP3.5 Pieh Ergonomic Cross Pien Hammer 3.5 lb EA $110.00 44 


PTCP4.0 Pieh Ergonomic Cross Pien Hammer 4.0 lb EA $110.00 44 

TFSF70 TFS Anvil 70 lb Farrier EA $398.00 40 Hammers, Ergonomic Diagonal Pein 

TFSF125 TFS Anvil 125 lb Farrier EA $710.00 40 HDPH7 Big Blu Diagonal Pein Hammer RH 2.6 lb EA $124.00 44 

TFSC250 TFS Anvil 250 lb Competition EA $1,221.00 40 HDPH8 Big Blu Diagonal Pein Hammer LH 2.6 lb EA $124.00 44 

TFSF1 TFS Anvil 100 lb Future 1 EA $705.00 40 PTDP2.5-L Pieh Ergonomic Diagonal Hammer 2.5 lb LH EA $108.00 44 

TFSF3 TFS Anvil 96 lb Future 3 EA $740.00 40 PTDP2.5-R Pieh Ergonomic Diagonal Hammer 2.5 lb RH EA $108.00 44 

TFSF4 TFS Anvil 96 lb Future 4 EA $899.00 40 Hammers, Ergonomic Straight Pein 

TFSF5 TFS Anvil 55 lb Future 5 EA $582.47 40 HSPH9 Big Blu Straight Pein Hammer 2.6 lb EA $124.00 44 

TFS7LG65 TFS Anvil 65 lb LI’L Giant EA $441.00 40 HSPH10 Big Blu Straight Pein Hammer 3.5 lb EA $125.00 44 

Anvils (Silversmith) 

PTSP1.5 Pieh Tool Ergonomic Straight Hammer 1.5 lb EA $105.00 44 

0099010000 Peddinghaus Anvil 500 Gr Silversmith EA $137.00 42 PTSP2.5 Pieh Tool Ergonomic Straight Hammer 2.5 lb EA $108.00 44 

Anvils (Blacksmith) 

PTSP3.5 Pieh Tool Ergonomic Straight Hammer 3.5 lb EA $110.00 44 

3080000020 Peddinghaus Anvil 44 lb Double Horn EA $445.00 42 Hammers (Rounding Hammers) 

3080000035 Peddinghaus Anvil 77 lb Double Horn EA $780.00 42 JBRH2 Blurton Rounding Hammer 2 lb EA $119.00 45 

3080000050 Peddinghaus Anvil 110 lb Double Horn EA $1,110.00 42 JBRH2.5 Blurton Rounding Hammer 2-1/2 lb EA $119.00 45 

3080000075 Peddinghaus Anvil 165 lb Double Horn EA $1,680.00 42 60 Diamond Rounding Hammer 1.5 lb (24 oz) EA $42.40 45 

14165 Ped Ridgid Anvil 77 lb Double Horn EA $750.00 42 61B Diamond Rounding Hammer 2.25 lb (36 oz) EA $41.65 45 

14190 Ped Ridgid Anvil 275 lb Double Horn EA $2,030.00 42 1.75LB Flatland Forge Rounding Hammer 1.75 lb EA $187.00 45 

14169 Ped Ridgid Anvil 165 lb Double Horn EA $1,331.00 42 2LB Flatland Forge Rounding Hammer 2 lb EA $187.00 45 

*TFS Anvils: $50 shipping in the continental USA (excluding handling and 

286HT Nordic Viking Rounding Hammer 1.5 lb EA $36.80 45 

insurance)! See our handling charges in our Terms. *Items for pick up in our 285HT Nordic Viking Rounding Hammer 2 lb EA $39.00 45 


PTSTD.RH1.5 Pieh Tool Standard Rounding Hammer 1.5 lb EA $80.00 45 

TFSSB1 TFS Anvil 100 lb Blacksmith Single Horn EA $599.00 42 PTSTD.RH2.0 Pieh Tool Standard Rounding Hammer 2 lb EA $80.00 45 

TFSSB150 TFS Anvil 150 lb Blacksmith Single Horn EA $850.00 42 PTSTD.RH2.5 Pieh Tool Standard Rounding Hammer 2.5 lb EA $84.00 45 

TFSSB200 TFS Anvil 200 lb Blacksmith Single Horn EA $1,191.00 42 Hammers (Ball Pein) 

TFSSB300 TFS Anvil 300 lb Blacksmith Single Horn EA $1,554.00 42 BPH1 Flatland Forge Ball Pein Hammer 2 lb EA $187.00 45 

TFSSB400 TFS Anvil 400 Blacksmith Single Horn EA $2,070.00 42 5081030250 Ped Ball Pein Engineers Hammer 100 Gr EA $19.75 45 

TFSSB500 TFS Anvil 500 Blacksmith Single Horn *S/O EA $2,449.00 42 5081030500 Ped Ball Pein Engineers Hammer 225 Gr EA $21.10 45 

TFSDH1 TFS Anvil 100 lb Double Horn EA $617.00 42 5081030750 Ped Ball Pein Engineers Hammer 340 Gr EA $23.20 45 

TFSDH2 TFS Anvil 200 lb Smithy 2 Double Horn EA $1,289.00 42 5081031000 Ped Ball Pein Engineers Hammer 450 Gr EA $24.20 45 



TFSF2 TFS Anvil Future 2, 96 lb EA $770.00 42 Hammers (Straight Pein) 

Stall Jacks 

PTSTD.SP1.5 Pieh Tool Straight Pein Hammer 1.5 lb EA $80.00 45 

TFS-HAJ TFS Hitch Anvil Jack *S/O EA $337.00 42 PTSTD.SP2.5 Pieh Tool Straight Pein Hammer 2.5 lb EA $84.00 45 

ANVSJS Valley Stall Jack Standard EA $174.00 42 Hammers (Cross Pein) 

ANVSJT Valley Stall Jack Tall EA $181.00 42 JBCH Blurton Farriers Cross Pein Hammer 1-3/4 lb EA $119.00 45 

Anvil Stands 

GPBLK GFS Power Block EA $347.00 42 

11524 

5029020400 

5029020500 

Plumb Cross Pein Hammer 40 oz (2.5 lb) 

Ped French Cross Pein Hammer 400 Gr 

Ped French Cross Pein Hammer 500 Gr 

EA 

EA 

EA 

$21.60 

$20.25 

$21.40 

45 

45 

45 


139


Case Price 


5029020600 Ped French Cross Pein Hammer 600 Gr EA $25.65 45 





5039020600 Ped German Cross Pein Hammer 600 Gr. EA $21.55 45 

5039020800 Ped German Cross Pein Hammer 800 Gr EA $25.00 45 




5039980200 Ped German CP 200 Gr. (Ultratec Handle) *S/O EA $21.05 45 






5042040300 Ped German CP 300 Gr. (Ultramid Handle) EA $21.55 45 

5042980200 Ped German CP 200 Gr. (Ultratec Handle) EA $24.15 45 

5044031000 Ped Swedish Cross Pein Hammer 1000 Gr EA $41.00 45 

5044031500 Ped Swedish Cross Pein Hammer 1500 Gr EA $53.90 45 

5079020750 Ped Cross Pein Engineers Hammmer 340 Gr EA $21.25 45 

5079021000 Ped Cross Pein Engineers Hammer 450 Gr EA $21.90 45 

5079031125 Ped Cross Pein Engineers Hammer 500 Gr EA $24.70 45 

PCPH Picard Cross Pein Hammer 1500 Gr-Dressed EA $81.00 45 

PCPH1K Picard Cross Pein Hammer 1000 Gr-Dressed EA $63.00 45 

PCPH500 Picard Cross Pein 500 Gr-Dressed EA $58.50 45 

PCPH-U Picard Cross Pein-Hammer 1500 Gr EA $65.00 45 

PTSTD.CP1.5 Pieh Tool Cross Pein Hammer 1.5 lb EA $80.00 45 

PTSTD.CP2.5 Pieh Tool Cross Pein Hammer 2.5 lb EA $84.00 45 

Hammers, Farrier Driving Hammers 

BDH6 Bellota Driving Hammer 6 oz. EA $66.11 46 

JBDH8 Blurton Driving Hammer 8 oz. EA $112.00 46 




FH10 Diam Driving Hammer 10 oz. EA $37.05 46 

FH14 Diam Driving Hammer 14 oz. EA $44.70 46 

DH8 Flatland Driving Hammer 8 oz. EA $132.00 46 

DH10 Flatland Driving Hammer 10 oz. EA $132.00 46 

HHDH8 Horse Head Driving Hammer 8 oz. EA $145.00 46 

HHDH12 Horse Head Driving Hammer 12 oz. EA $145.00 46 

0751 NC Cavalry Driving Hammer 12 oz. EA $69.00 46 

0749 NC Cavalry Driving Hammer 14 oz. EA $76.85 46 

Hammers, Sledges 

5027023000 Ped Cross Pein Sledge 3000 Gr EA $50.80 46 

5027025000 Ped Cross Pein Sledge 5000 Gr EA $72.35 46 

5028023000 Ped Straight Pein Sledge 3000 Gr EA $50.80 46 

5028025000 Ped Straight Pein Sledge 5000 Gr EA $72.35 46 

5247021000 Ped Double Face Dutch Pat Sledge 1000 Gr EA $23.00 46 

5247021250 Ped Double Face DF Dutch Pat Sledge 1250 Gr EA $24.00 46 

5293021000 Ped Double Face Sledge 1000 Gr EA $22.20 46 





Mallets, Non-Marring 

12002 Hickory Mallet #2 EA $24.80 46 



11000 Rawhide Mallet #0 EA $14.60 46 




Hammers, Split Head and Parts 

21001 Split Head Rawhide Faces #1 PR $10.00 46 





31001 Split Head Rawhide Hammer #1 EA $41.40 46 





Hammers, Speciality 

CCBH2 Cliff Carroll Brass Hammer 2 lb EA $24.50 47 

CCBH3 Cliff Carroll Brass Hammer 3 lb EA $30.45 47 

140 

Case Price 


0078020800 Ped Boiler (Planishing) Hammer 800 Gr *S/O EA $107.00 47 

5065031500 Ped Copper Hammer 1500 Gr *S/O EA $136.40 47 

0100020000 Ped Goldsmith Hammer 80 Gr *S/O EA $42.45 47 

Hammers, Geo Lapidary 

GP-100 Estwing Geo Pick, 4 lb 25” Long EA $73.00 47 

E3-22P Estwing Rock Pick (Pointed Tip) 13” 22 oz EA $37.00 47 

E6-22BLC Estwing Big Blue Rock Pick (Chisel Edge) 12” 20 oz EA $39.00 47 

E44A Estwing Camper’s Axe w/Sheath 4”edge x 16”Long EA $54.00 47 

12-12 Steel Gold Pan 12” 12 oz EA $7.00 47 

Handles, Wedges and Parts 

JBDHH Blurton Driving Hammer Handle EA $11.55 48 

JBRCHH Blurton Rounding/Pein Ham Handle EA $13.60 48 

CHANDLEL Cliff Carroll Hickory Handle, Large EA $9.85 48 

CHANDLEM Cliff Carroll Hickory Handle, Medium EA $9.85 48 

FFDHH FF Driving Hammer Handle EA $17.50 48 

HHDHH-6 Horse Head Driving Hammer Handle (6 oz) EA $24.00 48 



10314-AAW Hunter’s Axe Handle EA $5.65 48 

51000 Mallet Handle #0 EA $4.60 48 






0743B NC Driving Ham Handle (12 oz) EA $6.40 48 

0743C NC Driving Ham Handle (14 oz) EA $6.40 48 

7000548500 Ped Hndl 340 Gr Engineers Ash EA $3.75 48 

7000548600 Ped Hndl 340 Gr Engineers Hickory EA $7.35 48 

7000548800 Ped Hndl 450/500 Gr Engineers Hickory EA $8.15 48 

7000549000 Ped Hndl 675 Gr Ball Pein Hickory EA $9.15 48 

7000549200 Ped Hndl 900 Gr Ball Pein Hickory EA $10.15 48 

7000538100 Ped Hndl 300 Gr Germ/French Ash EA $3.75 48 

7000538200 Ped Hndl 300 Gr Germ/French Hickory EA $5.90 48 

7000538500 Ped Hndl 400/500 Germ/French Ash EA $3.75 48 

7005518400 Ped Hndl 500 Gr Germ Ultramid (Red) EA $10.15 48 

7000538700 Ped Hndl 600 Gr Germ/French Ash EA $4.25 48 




7050441500 Ped Hndl 1000/1500 Gr Swedish Hick . EA $12.90 48 


7000443200 Ped Hndl 1500 Gr Sledges Ash EA $4.55 48 



7000546200 Ped Hndl 3000 Gr Sledges Hickory EA $21.40 48 


7000546400 Ped Hndl 5000 Gr Sledges Hickory EA $29.55 48 

7001510100 Ped Hndl Top Fullers/Top Swages Ash EA $13.10 48 

7112775300 Ped 7 mm Conical Wedge EA $0.50 48 








10114 Scout Axe Handle EA $5.65 48 

53001 Split Head #1 Handle EA $5.70 48 





31036 Split Head Sledge Handle #5 EA $13.06 48 

10918.8 Tomahawk Handle EA $5.40 48 

WTTL W-Brand Top Tool Lock EA $5.00 48 

Hammers, Chasing & Repousse 

0101020025 Ped Chasing Hammer 25mm EA $60.45 49 

077-0804 Picard Chasing Hammer 30 mm EA $54.00 49 

Hammers, Raising 

0057020200 Ped Bordering Hammer 200 Gr EA $38.70 49 

0057020300 Ped Bordering Hammer 300 Gr EA $39.00 49 

0052020000 Ped Chasing Hammer 300 Gr EA $38.70 49 

0403020000 Ped Chasing Hammer 400 Gr EA $41.00 49 

0401020000 Ped Embossing Hammer 100 Gr EA $41.00 49 





Case Price 



0178030000 Ped Finishing/Grooving Hammer 380 Gr EA $52.60 49 

0053020200 Ped Grooving Hammer 200 Gr EA $38.70 49 



0402020000 Ped Planishing Hammer 170 Gr EA $41.00 49 

2059030000 Ped Planishing Hammer (1 Face) 200 Gr *S/O EA $62.05 46 

0062020250 Ped Polishing Hammer 250 Gr EA $38.70 49 



0063020000 Ped Polishing (Double Face) Hammer 400 Gr EA $38.70 49 

0069020000 Ped Polishing Hammer (Single Face) 400 Gr EA $42.95 49 

0071020000 Ped Planishing Hammer 300 Gr EA $39.85 49 

0047020200 Ped Shrinking Hammer 200 Gr EA $38.05 49 

0047020300 Ped Shrinking Hammer (105mm) 300 Gr EA $38.05 49 

0049020000 Ped Shrinking Hammer (134mm) 300 Gr EA $38.05 49 

0050020300 Ped Shrinking Hammer 300 Gr EA $38.05 49 

0060020500 Ped Stretching Hammer 500 Gr EA $43.10 49 

0060020750 Ped Stretching Hammer 750 Gr EA $60.45 49 

Hammers, Mallet 

15008 Bossing Mallet #8 EA $26.80 49 



PRHS Pieh Pimentel Raising Hammer EA $46.00 49 

Metal Forming Stakes and Tools 

Peddinghuas 

0010010000 Ped Blowhorn Anvil 7000 Gr *S/O EA $1,176.00 51 

0036010040 Ped Bordering Stake 1000 Gr *S/O EA $72.85 50 

0036010050 Ped Bordering Stake 1400 Gr *S/O EA $87.00 50 

0023010000 Ped Braziers’ Anvil 10000 Gr *S/O EA $1,249.52 51 

0015010000 Ped Creasing Anvil 4000 Gr *S/O EA $432.00 51 

0017010000 Ped Creasing Anvil with Bick 4000 Gr *S/O EA $493.30 51 

0039010040 Ped Flat Stake 1000 Gr *S/O EA $98.80 50 

0019010000 Ped Fretting Anvil 6000 Gr *S/O EA $525.95 51 

0031010080 Ped Hatchet Stake 1000 Gr *S/O EA $81.65 50 







0001010700 Ped Needle Case Anvil 5500 Gr *S/O EA $738.30 51 



0037017580 Ped Rectangle Stake 4000 Gr *S/O EA $377.30 51 

0037018090 Ped Rectangle Stake 5000 Gr *S/O EA $424.65 51 

0041010040 Ped Round Flat Head Stake1000 Gr *S/O EA $98.80 50 

0042010040 Ped Round Stake 1000 Gr *S/O EA $98.80 50 

0042010050 Ped Round Stake 1600 Gr *S/O EA $121.70 50 

0098010135 Ped Silversmith Bick Iron, 3 kg *S/O EA $218.00 51 





0097010080 Ped Square Flat Anvil, 1750 Gr *S/O EA $204.00 51 

0043010000 Ped Square Flat Stake 1600 Gr *S/O EA $121.70 50 

0038018080 Ped Square Stake 4000 Gr *S/O EA $377.30 51 

0038018080 Ped Square Stake 4000 Gr *S/O EA $377.30 51 

0027010060 Ped Tinkers Anvil 2000 Gr *S/O EA $215.60 50 






X0026010080 Ped Tinkers Anvil 4000 Gr *S/O EA $269.50 50 

Stake Holder (Metal Forming) 

0106010000 Ped Working Swage Block 9500 Gr EA $735.00 51 


074-06 Flat Top Stake Sharp Edge EA $159.00 52 

074-09 Mushroom Stake EA $171.00 52 

BI1TM Pieh Bick Iron 8x1” EA $150.00 52 

BS3TM Pieh Ball Stake 2-3/8” EA $64.00 52 

SN1/4TM Pieh Snarling Iron Small EA $41.00 52 

SN1/2TM Pieh Snarling Iron Medium EA $63.00 52 

SN3/4TM Pieh Snarling Iron Large EA $63.00 52 

SS1TM Pieh Sinusoidal Stake Small Wave EA $99.00 52 

SS2TM Pieh Sinusoidal Stake Medium Wave EA $135.00 52 


Case Price 


SS3TM Pieh Sinusoidal Stake Large Wave EA $187.50 52 

Swage Blocks 

CFSB-A BPCF Swage Block A, 12x12x4” EA $445.00 52 

CFSB-B BPCF Swage Block B, 12x12x4” EA $490.00 52 

BFSB-P BF Mini Swage Block, 3-1/2x4-1/2” EA $55.00 52 

GMSB-P GM Mini Swage Block, 3x3x1” EA $26.00 52 

GMSB-A GM Swage Block A (Shovel), 10x10x3-3/4” EA $295.00 52 

GMSB-B GM Swage Block B (7-1/2” Ladle), 10x10x3-3/4” EA $295.00 52 

RLBLK Lorance Swage Block EA $208.00 52 

Anvil Saddles 

PTAS750 Pieh Anvil/Fork Saddle 3/4” EA $25.00 53 

PTAS875 Pieh Anvil/Fork Saddle 7/8” EA $25.00 53 

PTAS100 Pieh Anvil/Fork Saddle 1” EA $25.00 53 

PTAS114 Pieh Anvil/Fork Saddle 1-1/4” EA $25.00 53 

Chisels (Blacksmith) 

5046020000 Ped Cold Chisel with Wood Handle EA $81.35 53 

5045020000 Ped Hot Chisel with Wood Handle EA $80.35 53 

6615110000 Ped Slitting Chisel EA $11.90 53 

6616110000 Ped Slitting Chisel with Plastic Handle EA $22.20 53 

VC000 Pieh Veining (Hot Cut-Curved) Chisel, S7 EA $24.00 53 

VC000-H13 Pieh Veining (Hot Cut-Curved) Chisel, H13 EA $26.00 53 

Hardies (See more hardies on page 35) 

PTCH750-B Pieh Bias Hardy 3/4” EA $65.00 53 

PTCH875-B Pieh Bias Hardy 7/8’ EA $65.00 53 

PTCH100-B Pieh Bias Hardy 1” EA $65.00 53 

PTCH125-B Pieh Bias Hardy 1-1/4” EA $65.00 53 

PTCH750 Pieh Chisel Hardy 3/4” EA $65.00 53 

PTCH875 Pieh Chisel Hardy 7/8” EA $65.00 53 

PTCH100 Pieh Chisel Hardy 1” EA $65.00 53 

PTCH125 

Mandrels 

Pieh Chisel Hardy 1-1/4” EA $65.00 53 

GMCM15 Green Mengel Cone Mandrel 1” EA $107.00 53 

PTCM34 Pieh Cone Mandrel 3/4” EA $62.00 53 

PTCM78 Pieh Cone Mandrel 7/8’ EA $62.00 53 

PTCM1 Pieh Cone Mandrel 1” EA $62.00 53 

PTCM114 Pieh Cone Mandrel 1-1/4” EA $62.00 53 

Miscellaneous Forging Tools 

SAD Anvil Devil 2-1/2x1/2” EA $4.50 53 

CDB1 Ball Hardy 1” EA $30.00 53 

CDVSH CD Vise Scroll Tool-Hexagon base EA $18.00 53 

SMOOSH 

Rose Kit 

Pieh Smoosh-O-Matic 1” (2 Die Sets) KT $55.00 53 

ROSE-K Pieh Rose Kit 6 pieces on a sheet EA $10.50 53 

Scrolling Wrenches 

CDSW12 Pieh Scrolling Wrench 1/2” EA $19.00 53 

CDSW38 Pieh Scrolling Wrench 3/8” EA $19.00 53 

Turning Forks 

TF34 Pieh Turning Fork 3/4” EA $23.50 53 

TF78 Pieh Turning Fork 7/8” EA $23.50 53 

TF1 Pieh Turning Fork 1” EA $23.50 53 

TF114 Pieh Turning Fork 1-1/4” EA $26.00 53 

Ball Punches 

BP125 Pieh Ball Punch 1/8” EA $22.00 54 








BPD625 Pieh Ball Punch Dimpled 5/8” EA $26.00 54 


BPD750 Pieh Ball Punch Dimpled 3/4” EA $29.75 54 

Center Punches 

CNTRP1 Flatland Forge Center Punch EA $43.00 54 

6612110130 Ped Center Punch 10x120 mm EA $3.95 54 

6612110162 Ped Center Punch 12x150 mm EA $5.05 54 

6612110164 Ped Center Punch 14x150mm EA $7.35 54 

6624110250 Ped Center Punch 15x250mm EA $11.75 54 

CP000 Pieh Center Punch EA $24.00 54 

CPC000 Pieh Pyramid Center Punch S7, 7” Long EA $24.00 54 

Drift Punches 

6608110001 Ped Drift Punch 10x1, 120 mm EA $3.60 54 





141


Case Price 




DP188 Pieh Drift Punch 3/16” EA $22.00 54 






A33DriftSet Drift Punch (Set of 6) SET $125.40 54 

Tool Holder Pieh Tool Roll EA $25.00 54 

Eye/Ear Character Punches 

DE000 Pieh Duck Eye Punch EA $24.00 54 

EE000 Pieh Eagle Eye Punch EA $24.00 54 

HE000 Pieh Horse Head Ear Punch EA $24.00 54 

EP250 Pieh Round Eye Punch 1/4” EA $24.00 54 



ES500 Pieh Wizard Eye Socket Punch EA $24.00 54 

WE000 Pieh Wolf Eye Punch EA $24.00 54 

S7 SET-20 S7 Punch Set of 20 SET $466.00 54 

Flatters and Set Hammer 

5050020060 Ped Square Flatter 60 mm EA $125.75 54 

5050020070 Ped Square Flatter 70 mm EA $158.10 54 

5052020000 Ped Set Hammer 2000 Gr *S/O EA $124.95 54 

5053010000 Ped Bottom Anvil Block EA $110.00 54 

Fuller Punches 

FP375 Pieh Fuller-Large EA $24.00 54 

FP250 Pieh Fuller-Medium EA $24.00 54 

FP125 

Fullers 

Pieh Fuller-Small EA $24.00 54 

5055010015 Ped Bottom Fuller 15 mm *S/O EA $94.25 54 

5055010020 Ped Bottom Fuller 20 mm *S/O EA $94.25 54 

5054020015 Ped Top Fuller 15 mm *S/O EA $113.00 54 

5054020020 Ped Top Fuller 20 mm *S/O EA $113.00 54 

Round Punches, Handled 

5056020010 Ped Round Punch 10 mm *S/O EA $93.25 54 



Swages, Handled 

5049010010 Ped Bottom Swage 10 mm *S/O EA $104.85 54 



5048020010 Ped Top Swage 10 mm *S/O EA $123.95 54 



Vise Wedge 

VW100 PTC Vise Wedge EA $30.00 54 

Chasing and Repousse Supplies 

0095010000 Ped Chasing Punch, 10 Pcs SET $113.00 55 

PTChaseTL.188 Pieh Chase Thin Liner 3/16” EA $10.35 55 

PTChaseTL.25 Pieh Chase Thin Liner 1/4” EA $10.35 55 

PTChaseTLDS.25 Pieh Chase Thin Liner (Dbl sided bevel) 1/4” EA $10.35 55 

PTChaseTH.438 Pieh Chase Thick Liner 7/16” EA $10.35 55 

PTChaseTH.50 Pieh Chase Thick Liner 1/2” EA $10.35 55 

PTChaseTHDS.50 Pieh Chase Thick Liner (Dbl sided bevel) 1/2” EA $10.35 55 

PTChaseHR.50 Pieh Half Round 1/2” EA $10.35 55 

PTChaseHRTH.19 Pieh Half Round 3/16” (Thick) EA $10.35 55 

PTChaseHRT.19 Pieh Half Round 3/16” (Thin) EA $10.35 55 

PTChaseRh.19 Pieh Rhombus 3/16” EA $10.35 55 

PTChaseS1 Pieh Chasing Set #1, 6 Tools SET $70.00 55 




PBPR Pitch Bowl Ring Pad EA $15.00 55 

PB8 Pitch Bowl, 8” EA $49.50 55 

PBK8 Pitch Bowl Kit KIT $126.00 55 

RGP Red German Pitch 2 kg EA $68.00 55 

Tongs, the Billy Box Jaw 

1/2” Box 

PT4052 Billy Tong Box Jaw 1/4” EA $40.00 56 


PT4054 

3/4” Box 

Billy Tong Box Jaw 3/8” EA $40.00 56 



PT4002 

1” Box 


142 

Case Price 





PT4006 

1-1/2” Box 





Tongs, the Billy Farrier/Fire 

PT4046 Billy Tong Duckbill EA $32.00 56 

PT4047 Billy Tong Fire 1/4” EA $34.00 56 





Tongs, the Billy Rivet & Pick Up 

PT4010 Billy Tong Rivet 3/8” EA $34.00 56 



PT4013 Billy Tong Single Pickup Small EA $34.00 56 

PT4014 Billy Tong Single Pickup Medium EA $34.00 56 

PT4015 Billy Tong Single Pickup Large EA $36.00 56 

PT4016 Billy Tong Double Pickup EA $39.00 56 

PT4017 Billy Tong Triple Pickup EA $45.00 56 

Tongs, the Billy Scrolling 

PT4042 Billy Tong Scrolling Small (14” reins) EA $36.00 56 

PT4042S Billy Tong Scrolling Small (8” reins) EA $34.00 56 

PT4043 Billy Tong Scrolling Large EA $37.00 56 

PT4044 Billy Tong Scrolling Pliers EA $32.00 56 

Tongs, the Billy V-Bit 

PT4037 Billy Tong V-Bit 1/4” EA $40.00 56 





PT4020-P Billy Tong V-Bolt 1/4” EA $45.00 56 





PT4020 Billy Tong V-Bolt 1/4”, Made in USA EA $50.00 56 





Tongs, the Billy Wolf Jaw 

PT4018 Billy Tong Wolf Jaw, Sm EA $37.00 56 

PT4019 Billy Tong Wolf Jaw, Lg EA $40.00 56 

Tongs, the Billy Z-Bit 

PT4056 Billy Z Tong 1/4x3/8” EA $40.00 57 



PT4059 Billy Z Tong 1/4x1” EA $40.00 57 

PT4060 Billy Z Tong 1/4x1-1/4” EA $40.00 57 



PT4063 Billy Z Tong 1/4x2” EA $40.00 57 


PT4065 

Brushes 

Billy Z Tong 1/4x2-1/2” EA $40.00 57 

20566 Brush Block 1-1/4” 12 EA $9.05 $8.31 57 

20687 Brush Block 2” 12 EA $14.00 $12.54 57 

20688 Brush Block 3” 12 EA $16.00 $14.54 57 

20567 Brush Block with Handle 1-1/4” 12 EA $21.00 $19.29 57 

20549 Brush Brass Scratch 12 EA $10.25 $9.41 57 

85067 Brush Brass Welders Wire Toothbrush 36 EA $3.35 $2.61 57 

85033 Brush Curved Handle 12 EA $3.55 $2.85 57 

85055 Brush Stainless Steel Wire Toothbrush 36 EA $2.85 $2.61 57 

Farrier Tongs 

JBFT1/2 Blurton Fire Tong 1/2” EA $90.00 57 

JBFT1/4 Blurton Fire Tong 1/4’ EA $90.00 57 


JBFT5/16 Blurton Fire Tong 5/16’ EA $90.00 57 


JBHFT Blurton Hot Fitting Tong EA $62.40 57 

FT15 Diamond Fire Tong 3/8” EA $36.60 57 



Case Price 


WHST W-Brand Hot Fitting Tongs EA $58.00 57 

Tongs, Peddinghaus 

6171010300 Ped Flat Nosed Tong 300 mm EA $26.95 57 

6171010400 Ped Flat Nosed Tong 400 mm EA $35.60 57 

6170010500 Ped Pickup Tong 500 mm EA $46.50 57 

6170010600 Ped Pickup Tong 600 mm EA $62.55 57 

6172010300 Ped Round Nosed Tong 300 mm EA $30.00 57 



6175010300 Ped Wolf Jaw Tong 300 mm EA $42.00 57 




Pyramid Head Screws (Door Screws) 

PHDS06.0500 Pyramid Hd #6 1/4x1/2” EA $0.20 58 



PHDS07.1000 Pyramid Hd #7 9/32x1” EA $0.28 58 




PHDS10.1125 Pyramid Hd #10 11/32x1-1/4” EA $0.39 58 



PHDS12.1150 Pyramid Hd #12 3/8x 1-1/2” EA $0.51 58 




Rivets & Burrs, Flat Head (Copper) 

8 Gauge 

9B0840 Rivet Copper Belt 8x5/8” LB $13.90 58 


9B0864 Rivet Copper Belt 8x1” LB $13.90 58 

9B0868 

10 Gauge 

Rivet Copper Belt 8x1-1/4” LB $13.90 58 



9B1064 

14 Gauge 

Rivet Copper Belt 10x1” LB $13.90 58 

9B1424 Rivet Copper Belt 14x3/8” *S/O LB $13.85 58 

9B1432 

Burrs 

Rivet Copper Belt 14x1/2” LB $14.10 58 

9C0800 Burr Copper 8 LB $26.90 58 




Rivets, Round Head (Steel) 

1/8 

S0125R01000 

5/32 

Rivet 1/8x1” RD HD Steel 5 LB $13.90 $13.21 58 

S0156R00625 Rivet 5/32x5/8” RD HD Steel 5 LB $12.00 $11.40 58 

S0156R02000 Rivet 5/32x2” RD HD Steel *S/O 5 LB $12.30 $11.69 58 

S0156R05000 

3/16 

Rivet 5/32x5” RD HD Steel *S/O 5 LB $11.97 $11.38 58 

S0187R00375 Rivet, 3/16x3/8” RD HD Steel 5 LB $9.80 $9.31 58 




S0187R01000 Rivet, 3/16x1” RD HD Steel 5 LB $9.23 $8.77 58 

S0187R01500 Rivet, 3/16x1”-1/2 RD HD Steel 5 LB $9.35 $8.89 58 

S0187R02000 

1/4 

Rivet, 3/16x2” RD HD Steel *S/O 5 LB $8.39 $7.98 58 




S0250R01500 Rivet, 1/4x1-1/2” RD HD Steel 5 LB $6.16 $5.86 58 


S0250R02000 

5/16 

Rivet, 1/4x 2” RD HD Steel 5 LB $6.50 $6.18 58 



S0312R00875 Rivet, 5/16x7/8” RD Steel 5 LB $5.95 $5.66 58 


S0312R02000 

3/8 




Case Price 



S0375R01250 

1/2 

Rivet, 3/8x1-1/4” RD HD Steel 5 LB $6.27 $5.96 58 




S0500R01625 Rivet, 1/2x1-5/8” RD HD Steel *S/O 5 LB $5.11 $4.86 58 


S0500R04500 

5/8 

Rivet, 1/2x4-1/2” RD HD Steel *S/O 5 LB $7.07 $6.72 58 

S0625R02000 

Kits, Variety 


RivKit-A Rivet Kit A-Steel assortment of 10 sizes KIT $101.06 58 

RivKit-B Rivet Kit B-Steel assortment of 7 sizes KIT $87.71 58 

Rivets, Round Head (Copper) 

9E1224 Rivet, Copper RD HD 3/16x3/8” LB $18.70 58 

9E1232 Rivet, Copper RD HD 3/16x1/2” LB $18.45 58 

9E1264 Rivet, Copper RD HD 3/16x1” LB $18.45 58 

9E1664 Rivet, Copper RD HD 1/4x1” LB $18.60 58 

Rivets, Round Head (Brass) 

9V1224 Rivet, Brass RD HD 3/16x 3/8” LB $19.30 58 

9V1232 Rivet, Brass RD HD 3/16x1/2” LB $19.30 58 

9V1632 Rivet, Brass RD HD 1/4x1/2” LB $19.00 58 

Rivet Headers 

PT-RH0188 Pieh Tool Rivet Header 3/16” EA $30.00 58 









PT-RH1063 Pieh Tool Rivet Header 1-1/16” EA $32.00 58 

PT-RH1375 

With Tong Grip 

Pieh Tool Rivet Header 1-3/8” EA $32.00 58 

PT-RH0188TG Pieh Tool Rivet Header 3/16” (Tong Grip) EA $32.00 58 








PT-RH1063TG Pieh Tool Rivet Header 1-1/16” (Tong Grip) EA $32.00 58 

PT-RH1375TG Pieh Tool Rivet Header 1-3/8” (Tong Grip) EA $32.00 58 

Lag Bolts, Square Head 

1/4 

SH0250LB01750 Lag Sq Hd 1/4x1-3/4” Blk Oxide EA $0.28 59 


SH0250LP01500 Lag Sq Hd 1/4x1-1/4” EA $0.22 59 

SH0250LP02000 Lag Sq Hd 1/4x2” 

5/16 

EA $0.30 59 

SH0312LB01000 Lag Sq Hd 5/16x1” Blk Oxide EA $0.25 59 






SH0312LP01250 Lag Sq Hd 5/16x1-1/4” EA $0.26 59 

SH0312LP01750 Lag Sq Hd 5/16x1-3/4” 

3/8 

EA $0.33 59 




SH0375LP02000 Lag Sq Hd 3/8x 2” EA $0.55 59 

SH0375LP03500 Lag Sq Hd 3/8x3-1/2” 

1/2 

EA $1.00 59 




SH0500LP02000 Lag Sq Hd 1/2x2” EA $1.10 59 

SH0500LP04000 Lag Sq Hd 1/2x4” EA $1.74 59 

SH0500LP06000 Lag Sq Hd 1/2x6” 

5/8 

EA $2.79 59 

143


Case Price 


SH0625LP04500 Lag Sq Hd 5/8x4-1/2” 

Patinas 

Dye Oxide 

EA $3.43 59 

DOPBlk-8 Dye Oxide-Black 8 oz EA $14.70 60 

DOPBlk-32 Dye Oxide-Black 32 oz EA $45.15 60 

DOPBlGr-8 Dye Oxide-Blue Green 8 oz EA $14.70 60 

DOPBlGr-32 Dye Oxide-Blue Green 32 oz EA $45.15 60 

DOPBlu-8 Dye Oxide-Blue 8 oz EA $14.70 60 

DOPBlu-32 Dye Oxide-Blue 32 oz EA $45.15 60 

DOPBrn-8 Dye Oxide-Brown 8 oz EA $14.70 60 

DOPBrn-32 Dye Oxide-Brown 32 oz EA $45.15 60 

DOPGrBl-8 Dye Oxide-Green Blue 8 oz EA $14.70 60 

DOPGrBl-32 Dye Oxide-Green Blue 32 oz EA $45.15 60 

DOPGrn-8 Dye Oxide-Green 8 oz EA $14.70 60 

DOPGrn-32 Dye Oxide-Green 32 oz EA $45.15 60 

DOPOrg-8 Dye Oxide-Orange 8 oz EA $14.70 60 

DOPOrg-32 Dye Oxide-Orange 32 oz EA $45.15 60 

DOPPGrn-8 Dye Oxide-Pea Green 8 oz EA $14.70 60 

DOPPGrn-32 Dye Oxide-Pea Green 32 oz EA $45.15 60 

DOPRed-8 Dye Oxide-Red 8 oz EA $14.70 60 

DOPRed-32 Dye Oxide-Red 32 oz EA $45.15 60 

DOPStGr-8 Dye Oxide-Stealth Green 8 oz EA $14.70 60 

DOPStGr-32 Dye Oxide-Stealth Green 32 oz EA $45.15 60 

DOPVlt-8 Dye Oxide-Violet 8 oz EA $14.70 60 

DOPVlt-32 Dye Oxide-Violet 32 oz EA $45.15 60 

DOPWht-8 Dye Oxide-White 8 oz EA $14.70 60 

DOPWht-32 Dye Oxide-White 32 oz EA $45.15 60 

DOPYlw-8 Dye Oxide-Yellow 8 oz EA $14.70 60 

DOPYlw-32 

Traditional 

Dye Oxide-Yellow 32 oz EA $45.15 60 

TPBM.8 Traditional Patina Black Magic 8 oz EA $15.75 60 

TPBM.Q Traditional Patina Black Magic 32 oz EA $38.85 60 

TPFN.8 Traditional Patina Ferric Nitrate 8 oz EA $13.65 60 

TPFN.Q Traditional Patina Ferric Nitrate 32 oz EA $30.45 60 

TPJG.8 Traditional Patina Jade Green 8 oz EA $13.65 60 

TPJG.Q Traditional Patina Jade Green 32 oz EA $30.45 60 

TPJB.8 Traditional Patina Japanese Brown 8 oz EA $13.65 60 

TPJB.Q Traditional Patina Japanese Brown 32 oz EA $30.45 60 

TPLG.8 Traditional Patina Light Green 8 oz EA $13.65 60 

TPLG.Q Traditional Patina Light Green 32 oz EA $30.45 60 

TPMG.8 Traditional Patina Mint Green 8 oz EA $13.65 60 

TPMG.Q Traditional Patina Mint Green 32 oz EA $30.45 60 

TPSB.8 Traditional Patina Slate Black 8 oz EA $15.75 60 

TPSB.Q Traditional Patina Slate Black 32 oz EA $38.85 60 

TPTG.8 Traditional Patina Tiffany Green 8 oz EA $13.65 60 

TPTG.Q 

Universal 

Traditional Patina Tiffany Green 32 oz EA $30.45 60 

UnivBlack-8 Universal Patina Black 8 oz EA $12.60 60 

UnivBlack-32 Universal Patina Black 32 oz EA $30.45 60 

UnivBlue-8 Universal Patina Blue 8 oz EA $12.60 60 

UnivBlue-32 Universal Patina Blue 32 oz EA $30.45 60 

UnivBrown-8 Universal Patina Brown 8 oz EA $12.60 60 

UnivBrown-32 Universal Patina Brown 32 oz EA $30.45 60 

UnivBurg-8 Universal Patina Burgundy 8 oz EA $12.60 60 

UnivBurg-32 Universal Patina Burgundy 32 oz EA $30.45 60 

UnivGreen-8 Universal Patina Green 8 oz EA $12.60 60 

UnivGreen-32 Universal Patina Green 32 oz EA $30.45 60 

UnivRed-8 Universal Patina Red 8 oz EA $12.60 60 

UnivRed-32 Universal Patina Red 32 oz EA $30.45 60 

UnivRust-8 Universal Patina Rust 8 oz EA $12.60 60 

UnivRust-32 Universal Patina Rust 32 oz EA $30.45 60 

UnivVerde-8 Universal Patina Verde Green 8 oz EA $12.60 60 

UnivVerde-32 Universal Patina Verde Green 32 oz EA $30.45 60 

UnivWhite-8 Universal Patina White 8 oz EA $12.60 60 

UnivWhite-32 Universal Patina White 32 oz EA $30.45 60 

UnivYellow-8 Universal Patina Yellow 8 oz EA $12.60 60 

UnivYellow-32 

Vista 

Universal Patina Yellow 32 oz EA $30.45 60 

VistaBlack-8 Vista Patina Black 8 oz EA $17.85 60 

VistaBlack-32 Vista Patina Black 32 oz EA $50.40 60 

VistaBlue-8 Vista Patina Blue 8 oz EA $17.85 60 

VistaBlue-32 Vista Patina Blue 32 oz EA $50.40 60 

VistaBrown-8 Vista Patina Brown 8 oz EA $17.85 60 

VistaBrown-32 Vista Patina Brown 32 oz EA $50.40 60 

VistaBurg-8 Vista Patina Burgundy 8 oz EA $17.85 60 

VistaBurg-32 Vista Patina Burgundy 32 oz EA $50.40 60 

VistaGrnF-8 Vista Patina Green Ferrous 8 oz EA $17.85 60 

144 

Case Price 


VistaGrnF-32 Vista Patina Green Ferrous 32 oz EA $50.40 60 

VistaGrnNF-8 Vista Patina Green Non-Ferrous 8 oz EA $17.85 60 

VistaGrnNF-32 Vista Patina Green Non-Ferrous 32 oz EA $50.40 60 

VistaRed-8 Vista Patina Red 8 oz EA $17.85 60 

VistaRed-32 Vista Patina Red 32 oz EA $50.40 60 

VistaRust-8 Vista Patina Rust 8 oz EA $17.85 60 

VistaRust-32 Vista Patina Rust 32 oz EA $50.40 60 

VistaYlw-8 Vista Patina Yellow 8 oz EA $17.85 60 

VistaYlw-32 Vista Patina Yellow 32 oz EA $50.40 60 

Stains & Dyes 

Smart Stains 

SStainK-8 Smart Stain Black 8 oz EA $17.85 60 

SStainE-8 Smart Stain Blue 8 oz EA $17.85 60 

SStainU-8 Smart Stain Blue Green 8 oz EA $17.85 60 

SStainB-8 Smart Stain Brown 8 oz EA $17.85 60 

SStainG-8 Smart Stain Green 8 oz EA $17.85 60 

SStainL-8 Smart Stain Green Blue 8 oz EA $17.85 60 

SStainO-8 Smart Stain Orange 8 oz EA $17.85 60 

SStainP-8 Smart Stain Pea Green 8 oz EA $17.85 60 

SStainR-8 Smart Stain Red 8 oz EA $17.85 60 

SStainS-8 Smart Stain Stealth Green 8 oz EA $17.85 60 

SStainV-8 Smart Stain Verde 8 oz EA $17.85 60 

SStainI-8 Smart Stain Violet 8 oz EA $17.85 60 

SStainW-8 Smart Stain White 8 oz EA $17.85 60 

SStainY-8 Smart Stain Yellow 8 oz EA $17.85 60 

Solvent Dyes Oxide 

SolvBlk Solvent Dye Black 1 oz EA $12.60 60 

SolvBlk-8 Solvent Dye Black 8 oz EA $53.55 60 

SolvBluGrn Solvent Dye Blue Green 1 oz EA $12.60 60 

SolvBluGrn-8 Solvent Dye Blue Green 8 oz EA $53.55 60 

SolvBlu Solvent Dye Blue 1 oz EA $12.60 60 

SolvBlu-8 Solvent Dye Blue 8 oz EA $53.55 60 

SolvBrw Solvent Dye Brown 1 oz EA $12.60 60 

SolvBrw-8 Solvent Dye Brown 8 oz EA $53.55 60 

SolvGrn Solvent Dye Green 1 oz EA $12.60 60 

SolvGrn-8 Solvent Dye Green 8 oz EA $53.55 60 

SolvOrg Solvent Dye Orange 1 oz EA $12.60 60 

SolvOrg-8 Solvent Dye Orange 8 oz EA $53.55 60 

SolvRed Solvent Dye Red 1 oz EA $12.60 60 

SolvRed-8 Solvent Dye Red 8 oz EA $53.55 60 

SolvVilt Solvent Dye Violet 1 oz EA $12.60 60 

SolvVilt-8 Solvent Dye Violet 8 oz EA $53.55 60 

SolvYlw Solvent Dye Yellow 1 oz EA $12.60 60 

SolvYlw-8 Solvent Dye Yellow 8 oz EA $53.55 60 

Solvent Dye Thinners 

SolvDTH-8 Solvent Dye Thinner 8 oz EA $22.05 60 

SolvDTH-32 Solvent Dye Thinner 32 oz EA $58.80 60 


Clear Guard 

PLF-32 Clear Guard Flat 32 oz EA $35.70 60 

PLF-1 Clear Guard Flat 1 gal EA $73.50 60 

PLF-S Clear Guard Flat Spray EA $16.80 60 

PLEF-F Clear Guard (Environmental) Flat 12 oz Spray EA $16.80 60 

PLS-32 Clear Guard Satin 32 oz EA $35.70 60 

PLS-1 Clear Guard Satin 1 gal EA $73.50 60 

PLS-S Clear Guard Satin Spray EA $16.80 60 

PLEF-S 

Metal Oil 

Clear Guard (Environmental) Satin 12 oz Spray EA $16.80 60 

MOK.8 Metal Oil Black 8 oz EA $17.85 60 

MOB.8 Metal Oil Brown 8 oz EA $17.85 60 

MOC.8 Metal Oil Clear 8 oz EA $17.85 60 

MOG.8 Metal Oil Green 8 oz EA $17.85 60 

MOR.8 

Prime-It 

Metal Oil Red 8 oz EA $17.85 60 

VBWP-8 Water Base Primer (Prime-It) 8 oz EA $10.50 60 

VBWP-32 Water Base Primer (Prime-It) 32 oz EA $33.60 60 

VBWP-G 

Smart Coat 1K 

Water Base Primer (Prime-It) Gal EA $87.15 60 

SC1K-8M Smart Coat 1K Sealer Matte 8 oz EA $14.70 60 

SC1K-QM Smart Coat 1K Sealer Matte 32 oz EA $35.70 60 

SC1K-GM Smart Coat 1K Sealer Matte gal EA $79.80 60 

SC1K-8S Smart Coat 1K Sealer Satin 8 oz EA $14.70 60 

SC1K-QS Smart Coat 1K Sealer Satin 32 oz EA $35.70 60 

SC1K-GS Smart Coat 1K Sealer Satin gal EA $79.80 60 

Gilders Paste 

GPAF Gilders African Bronze 92 ml EA $16.00 60 

GPAG Gilders Antique Gold 92 ml EA $16.00 60 



Case Price 


GPAP Gilders Apricot 92 ml EA $16.00 60 

GPBL Gilders Black 92 ml EA $16.00 60 

GPBR Gilders Bronze 92ml EA $16.00 60 

GPCY Gilders Canary Yellow 92 ml EA $16.00 60 

GPCB Gilders Celtic Bronze 92 ml EA $16.00 60 

GPCU Gilders Copper 92 ml EA $16.00 60 

GPCR Gilders Coral Red 92ml EA $16.00 60 

GPCM Gilders Cream 92ml EA $16.00 60 

GPDP Gilders Damson 92 ml EA $16.00 60 

GPFB Gilders Foundry Bronze 92 ml EA $16.00 60 

GPGS Gilders German Silver 92 ml EA $16.00 60 

GPGL Gilders Gold 92 ml EA $16.00 60 

GPIG Gilders Inca Gold 92 ml EA $16.00 60 

GPIB Gilders Iris Blue 92 ml EA $16.00 60 

GPOR Gilders Orange 92 ml EA $16.00 60 

GPPA Gilders Patina 92 ml EA $16.00 60 

GPPI Gilders Pinotage 92 ml EA $16.00 60 

GPRG Gilders Rich Gold 92 ml EA $16.00 60 

GPRU Gilders Rust 92 ml EA $16.00 60 

GPSW Gilders Sandalwood 92 ml EA $16.00 60 

GPSL Gilders Silver 92 ml EA $16.00 60 

GPSLT Gilders Slate 92 ml EA $16.00 60 

GPTR Gilders Tulip Red 92 ml EA $16.00 60 

GPVD Gilders Verdigris 92 ml EA $16.00 60 

GPVT Gilders Violet 92 ml EA $16.00 60 

GPWT 

Bees Wax 

Gilders White 92 ml EA $16.00 60 

BW1 Beeswax Bar 1 oz EA $2.40 60 

BWB Beeswax Block 1 lb EA $9.90 60 

Renaissance Wax 

RWAX-65ml Renaissance Wax/Polish 65 ml EA $15.00 60 

RWAX-200ml Renaissance Wax/Polish 200 ml EA $25.00 60 

RWAX-2.5L Renaissance Wax/Polish 2.5 liter EA $189.00 60 

Knife Sharpeners 

0566 Carbide Knife Sharpener EA $20.40 61 

FPDKS FPD Knife Sharpener (Diamond) EA $34.20 61 

10627 Nich Honer/Sharpening File EA $9.05 61 

SEDKS Save Edge Knife Sharpener EA $30.20 61 

PP1 Smith’s Pocket Pal Knife Sharpener EA $9.99 61 

DRET Smith’s Diamond Retractible/Reversible Sharpener EA $7.99 61 

3001 Smith’s Diamond Sharpening Steel 10” EA $29.99 61 

50002-9 

Magnets 

Smith’s Oval Ceramic Sharpening Rod EA $14.99 61 

MAGN2 Magnet, Apron 2 in. 6 EA $4.50 $4.28 61 

MAGN2.5 Magnet, Apron 2.5 in. 6 EA $5.50 $5.23 61 

MAGN3 Magnet, Apron 3 in. 6 EA $7.50 $7.13 61 

PM Magnet, Pencil (for hammers) EA $2.50 61 

41608 Nail EZ Wrist Magnet EA $13.40 61 

07577 Magnetic Knife/Tool Holder, Magnet Mount, Black EA 19.90 61 

07579 Magnetic Knife/Tool Holder, Screw Mount, Black EA 16.75 61 

MHHH20 Magnetic Plated Ceramic Hook, 2” EA $4.90 61 

NA012500N Magnetic Plated Neodymium Hook, 1.4” EA $9.00 61 

RHS02 Magnetic Retrieving Baton (Neodymium), 16x1” EA $75.00 61 

4AMC24PLC Magnetic Tool Holder, Screw Mount, Red EA $24.00 61 

07565 Telescoping Magnetic Pickup/Pointer w/Scribe EA $6.95 61 

HMKR-45 Base Magnet with Knob, 1.425” EA $2.50 61 

HMKR-70 Base Magnet with Knob, 2.63” EA $2.50 61 

Pliers, Snips and Wrenches 

C10SV Crescent 10” Locking Pliers, Straight Jaw EA $10.45 62 

C10CV Crescent 10” Locking Pliers/Wire Cutter EA $11.30 62 

C11CCV Crescent 11” Locking C-Clamp Pliers EA $16.60 62 

14042 Wilton C Clamp 404 EA $40.00 62 

14070 Wilton C Clamp 408 EA $75.00 62 

38110 Wilton 10” Ductile Pipe Wrench EA $15.99 62 

38114 Wilton 14” Ductile Pipe Wrench EA $24.99 62 

MPC3 Wiss Metal Wiss Snips 9” EA $14.80 62 

AC8NKWMP 

Rulers 

Crescent Wrench 8” EA $19.00 62 

86 Lufkin Steel Folding Rule 2 ft EA $45.99 62 

PTBR Pieh Brass Folding Rule 2 ft EA $39.60 62 

PTHR2 Pieh Hook Rule Gauge EA $22.00 62 

PTPR6 Pieh Round Protractor 6” EA $22.00 62 



PTSQ.S Pieh Steel Square 12” EA $22.00 62 

PTSQ.ST Pieh Steel Square 24” EA $25.00 62 

Marking Instruments 


Case Price 


92910-01 Silver Welders Pencil, Pkg of 3 2 EA $4.50 $3.99 62 

SOAP Soap Stone #1 6 EA $0.35 $0.33 62 

Welding Magnets 

WMRB80 Magnetic Welding Ground EA $34.99 62 

WMA50 Welding Angle Magnet Arrow 45/90/135 degree EA $7.95 62 

Utility Tools, Saws 

48-22-1901 Milw Fastback Flip Knife (5 blades) EA $14.99 63 

48-22-1910 Milw Side Slide Utility Knife (5 blades) EA $12.00 63 

48-22-4200 Milw ProPEX® /Tubing Cutter EA $29.40 63 

48-22-0305 Milw Folding Jab Saw 6”, (3 blades) EA $23.00 63 

6177-20 Milw Abrasive Cut-Off Machine, 14” (Chop Saw) EA $170.00 63 

6232-21 Milw Deep Cut Band Saw Kit EA $319.00 63 

6370-21 Milw Circular Saw Kit, 8” 13A EA $299.00 63 

6509-31 Milw Sawzall Recip Saw Kit EA $129.00 63 

6536-21 Milw Super Sawzall Orbital Recip Saw Kit EA $189.99 63 

Drills, Grinders & Shear 

0234-6 Milw Magnum Drill 1/2”, 950 RPM, 5.5A EA $155.00 64 

0299-20 Milw Drill 1/2”, 0-850 RPM, 8A EA $125.00 64 

5192 Milw Die Grinder, 21,000 RPM, 4.5A EA $229.00 64 

5540 Milw Polisher, 7” 0-2800 RPM, 11A EA $249.99 64 

6088-30 Milw Right Angle Sander/Grinder, 7-9” 15A EA $165.00 64 

6130-33 Milw Small Right Angle Grinder, 4-1/2” 7A EA $69.99 64 

6146-33 Milw Small Right Angle Grinder, 4-1/2” 11A EA $109.00 64 

6852-20 Milw Shear, 18GA, 6.8A, EA $175.00 64 

Drivers & Drills - Cordless 

2401-22 Milw M12 Screwdriver Kit EA $109.99 65 

2410-22 Milw M12 Drill Driver Kit, 3/8” EA $159.00 65 

2411-22 Milw M12 Hammer Drill Driver Kit, 3/8” EA $165.00 65 

2450-22 Milw M12 Hex Impact Driver Kit, 1/4” EA $149.00 65 

2601-22 Milw M18 Drill Driver Kit, 1/2” EA $219.00 65 

2602-22 Milw M18 Hammer Drill Driver Kit, 1/2” EA $315.00 65 

2650-21 Milw M18 Hex Cmpt Impact Driver Kit, 1/4” EA $219.00 65 

2662-22 Milw M18 Impact Wrench/Pin Detent Kit, 1/2” EA $399.00 65 

2663-22 Milw M18 Impact Wrench/Ring Kit, 1/2” EA $399.00 65 

Saws & Tool Kits - Cordless 

2420-21 Milw M12 Hackzall Saw Kit EA $139.99 66 

2445-21 Milw M12 Cordless Jig Saw Kit EA $149.99 66 

2629-22 Milw M18 Band Saw Kit EA $409.00 66 

2630-22 Milw M18 Circular Saw Kit EA $370.00 66 

2698-22 Milw M18 Cordless 2-Tool Combo Kit EA $449.99 66 

2696-24 Milw M18 Cordless 4-Tool Combo Kit EA $399.00 66 

2682-22 Milw M18 Metal Saw Kit, 5-3/8” EA $370.00 66 

2620-21 Milw M18 Sawzall® Recip Saw Tool Kit EA $260.00 66 

Specialty Power Tools 

2266-20 Milw Laser Temperature Gun EA $119.99 67 

2471-21 Milw M12 Copper Tubing Cutter EA $189.00 67 

2446-21XC Milw M12 Cordless Grease Gun EA $210.00 67 

2590-20 Milw M12 Cordless LITHIUM-ION Radio EA $99.99 67 

2426-21 Milw M12 Cordless Multi-Tool Kit EA $129.99 67 

2458-21 Milw M12 Cordless Palm Nailer Kit EA $139.00 67 

2460-21 Milw M12 Cordless Rotary Tool Kit EA $109.00 67 

2470-21 Milw M12 2” PVC Shear Kit EA $199.99 67 

8977-20 Milw Variable Temperature Heat Gun EA $99.00 67 

2202-20 Milw Voltage Detector EA $25.00 67 

Power Tool Accessories 

Buffing Wheels 

49-36-0600 Pad, Lambs Wool 7-1/2 EA $13.60 68 

48713 Sisal Fabric, 6 x 3/4 EA $5.40 68 

48733 TW Soft Cloth, 6 x 3/4 EA $3.70 68 

49-36-2150 Backing Plate 6-1/4 x 5/8 (Urethane) EA $13.60 68 

Cut-Off Wheels 

49-94-1485 Cutting Wheel 14 X 1/8 X 1 EA $8.00 68 

49-94-1415 Cutting Wheel 14 X 3/32 X 1, A/O EA $5.75 68 



49-94-4500 Cutting Wheel 4-1/2 X .045 X 7/8 Type 1 EA $1.50 68 

49-94-4505 Cutting Whl 4-1/2 X .045 X 7/8 Type 27 EA $1.75 68 

49-94-5005 Cutting Whl 5 X .045 X 7/8 Type 27 EA $2.15 68 

49-94-6305 

Flap Discs 

Cutting Whl 6 X .045 X 7/8 Type 27 EA $3.00 68 

48-80-8110 Flap Disc 4-1/2 X 5/8-11 36 Grit (T27) EA $7.85 68 






48-80-8000 Flap Disc 4-1/2 X 7/8 36 Grit (T29) EA $5.60 68 

145


Case Price 


48-80-8002 Flap Disc 4-1/2 X 7/8 80 Grit (T29) EA $5.60 68 

48-80-8040 Flap Disc 7 X 5/8-11 36 Grit (T29) EA $12.35 68 



48-80-8030 Flap Disc 7 X 7/8 36 Grit (T29) EA $10.85 68 



Grinding Discs 

49-94-4510 Grinding Disc 4-1/2 X 1/8 X 7/8 (Pipe, Light) EA $1.75 68 

49-94-4515 Grinding Disc 4-1/2 X 1/4 X 5/8-11 (Metal/SS) EA $2.50 68 

49-94-4520 Grinding Disc 4-1/2 X 1/4 X 7/8 (Metal/SS) EA $1.75 68 

49-94-4525 Grinding Disc 4-1/2 X 1/8 X 5/8-11 (Pipe, Light) EA $2.50 68 

49-94-4570 Grinding Disc 4-1/2 X 1/4 X 7/8 (Concrete) EA $1.75 68 

49-94-4580 Grinding Disc 4-1/2 X 1/4 X 7/8, (Metal) EA $5.00 68 

49-94-4585 Grinding Disc 4-1/2 X 1/4 X 5/8-11 (Metal) EA $6.25 68 

Sanding Discs 

AD736 Disc, Alum Oxide 7” 36 grit EA $2.15 68 



48-80-0689 Sanding Disc 4-1/2 Zirc 80 Grit EA $1.10 68 

48-80-0770 Sanding Disc 4-1/2 Ceram 24 Grit EA $2.60 68 









48-80-0622 Sanding Disc, A/O 4-1/2 24 Grit EA $1.40 68 



Angle Grinder Arbor Adaptor 

48-03-1005 Adapter Threaded Arbor EA $5.00 68 

Wire Wheels 

48-52-5070 Wheel 4 Crimped Wire, 5/8-11 CS EA $15.00 68 

48-52-5030 Wheel 4 Cable Twist Knot, 5/8-11 CS EA $16.00 68 

48-52-5020 Wheel 4 Cable Twist Knot, 5/8-11 SS EA $21.00 68 

48-52-1725 Wheel 6 Full Cable Twist Knot CS EA $19.00 68 

48-52-2220 Wheel 4 Stringer Bead, 1/2-13 CS EA $15.50 68 

48-52-5010 Wheel 4 Stringer Bead, 5/8-11 CS EA $15.50 68 

48-52-5000 Wheel 4 Stringer Bead, 5/8-11 SS EA $20.00 68 

48-52-1700 Wheel 5 Stringer Bead,5/8-11 CS EA $15.00 68 

48-52-1715 Wheel 6 Stringer Bead,5/8-11 CS EA $18.00 68 

Wire Wheel Brushes 

48-52-1335 Brush 4 Bevel Crimped, 5/8-11 SS EA $17.00 68 

48-52-1325 Brush 4 Bevel Crimped, 5/8-11 CS EA $15.50 68 

48-52-1305 Brush 4 Bevel Knotted, 5/8-11 CS EA $17.00 68 

48-52-1315 Brush 4 Bevel Knotted, 5/8-11 SS EA $25.00 68 

48-52-5065 Brush 3-1/2 Crimp Cup, 5/8-11 CS EA $15.50 68 

48-52-5060 Brush 3 Crimp Style Cup, 5/8-11 CS EA $16.50 68 

48-52-1300 Wheel 4 Crimped Wire Cup, 5/8-11 CS EA $23.00 68 

48-52-1400 Brush 5 Crimp Wire Cup, 5/8-11 CS EA $23.50 68 

48-52-1600 Brush 6 Crimp Wire Cup, 5/8-11 CS EA $34.50 68 

48-52-5040 Brush 2-3/4 Knot Cup, 5/8-11 CS EA $15.00 68 

48-52-5050 Brush 2-3/4 Knot Cup, 5/8-11 SS EA $20.00 68 

48-52-5067 Brush 3-1/2 Knot Cup, 5/8-11 CS EA $16.00 68 

48-52-1350 Brush 4 Knotted Cup, 5/8-11 CS EA $24.00 68 

48-52-1650 

Drill Bits 

Brush 6 Knotted Cup, 5/8-11 CS EA $39.00 68 

81509 Marxbore Jobber Length Drill Set, 29 pc EA $110.00 69 

82144 Marxbore Mechanic Length Drill Set, 29 pc EA $91.00 69 

Thunderbolt Drill Bits 

48-89-2803 Bit Thunderbolt Black Oxide Set 15pc EA $19.99 69 

48-89-2710 Bit 1/16 Thunderbolt Black Oxide (2-pk) EA $2.15 69 













146 

Case Price 


















Shockwave Drill and Driver Bits (*S/O ITEMS) 

48-32-2301 Shockwave 30 Degree Knuckle 11pc EA $25.00 69 

48-89-4445 Shockwave Hex Shank Drill Bit Set 10pc EA $37.00 69 

49-66-4562 Shockwave 1-7/8 Mag Nutdriver Set (4) EA $14.99 69 

48-32-4401 Shockwave Driver Bit Set 29pc EA $19.99 69 

48-32-4402 Shockwave Drill & Drive Set 35pc EA $30.00 69 

48-32-4403 Shockwave Impact Driver Set 18pc EA $16.00 69 

49-66-4502 Shockwave 1-7/8 Mag Nutdriver 1/4 EA $2.50 69 




48-32-4483 Shockwave 2 Power Bit Torx T15 EA $1.75 69 

48-32-4462 Shockwave 2 Power Bit Phillips #2 EA $1.75 69 

48-32-4602 Shockwave 2 Power Bit Phillips #2 (5-pk) EA $7.50 69 

48-32-4463 Shockwave 2 Power Bit Phillips #3 EA $1.75 69 

48-32-4471 Shockwave 2 Power Bit Sq Recess #1 EA $1.75 69 


48-32-4606 Shockwave 2 Power Bit Sq Recess #2 (5-pk) EA $7.50 69 









48-32-4562 Shockwave 3-1/2 Power Bit Phillips #2 EA $2.50 69 

48-32-4572 Shockwave 3-1/2 Power Bit Sq Recess EA $2.50 69 

48-32-4503 Shockwave Bit Tip Holder Mag 3 EA $6.00 69 

48-32-4411 Shockwave Insert Bit Phillips #1 (2-pk) EA $1.50 69 



48-32-4444 Shockwave Insert Bit Phillips #2 Red. Dia/2pk EA $1.50 69 


48-32-4421 Shockwave Insert Bit Sq Recess #1 (2-pk) EA $1.50 69 




Milwaukee Standard Driver Bits 

48-32-1700 Shockwave Drive Guide Set (Mag) 20pc EA $11.60 69 

Band Saw Blades 

48-39-0551 Band Saw Blade Dp (44-7/8) 10/14TPI (3-Pk) EA $18.00 69 

48-39-0501 Band Saw Blade Dp (44-7/8) 10TPI (3-Pk) EA $18.00 69 

48-39-0561 Band Saw Blade Dp (44-7/8) 14/18TPI (3-Pk) EA $18.00 69 


48-39-0521 Band Saw Blade Dp (44-7/8) 18TPI(3-Pk) EA $18.00 69 


Milwaukee Compact Portable Band Saw Blades 

48-39-0509 Band Saw Blade Comp (35-3/8) 10TPI (3-Pk) EA $18.00 

48-39-0519 Band Saw Blade Comp (35-3/8) 14TPI (3-Pk) EA $18.00 69 



Sawzall Blades 

49-22-1145 Sawzall General Purpose Kit 9 Pc EA $19.99 70 

49-22-1129 Sawzall Blade Asst 12pc EA $29.99 70 

49-22-0240 Super Sawzall Blade Asst 8pc EA $21.00 70 

General Purpose Blades 

48-00-5091 Super Sawzall Blade 8/12T 6” (5-pk) EA $10.25 70 



48-00-5092 Super Sawzall Blade 10T 6” (5-pk) EA $10.25 70 



Case Price 


48-00-5193 

Wood Fang 

Super Sawzall Blade 10/14t 8” (5-pk) EA $12.50 70 



48-00-5037 Super Sawzall Blade 5T12” (5-pk) EA $18.00 70 

Standard Metal Cutting Blades 






Fleam Wood Cutting Blades 



Specialty & Industrial Blades 

48-00-5701 Super Sawzall Blade 8T 6” Wrecker (5-pk) EA $14.00 70 



48-00-1440 Sawzall Blade 6” Diamond Grit EA $12.50 70 

48-00-1450 Sawzall Blade 9” Diamond Grit EA $15.50 70 

48-00-1420 Sawzall Blade 6” Tungsten Cbd EA $13.50 70 

48-00-1430 Sawzall Blade 9” Tungsten Cbd EA $16.50 70 

48-00-1303 Sawzall Blade Pruning 5T 12” EA $24.00 70 

48-00-5713 Super Sawzall Blade 10T 9” Torch (5-pk) EA $19.00 70 




48-00-5021 Super Sawzall Blade 5T 6” Ax (5-pk) EA $15.00 70 



Grinding/Deburring Wheels 

GW36 Grinding Wheel 8” 36 grit EA $28.00 70 

HBW9SF611 Hog-Brite EXL Debur Whl 9S Fine 6x1x1” EA $64.00 70 

HBW9SF6751 Hog-Brite EXL Debur Whl 9S Fine 6x1x1-3/4” EA $64.00 70 

FA5 

Rouges 

3M Flange Adaptor #5 Telescoping Reducer EA $7.80 70 

GST Grease Stick EA $9.00 70 

GCR Rouge Green Chrome Polishing Bar EA $12.75 70 

RFR Rouge Red Compound Tube EA $8.90 70 

SSC Rouge Stainless Steel Compound Tube EA $11.90 70 

TRI Rouge Tripoli Bar EA $11.65 70 

WCC Rouge White Compound Tube EA $12.75 70 

Sanding Belts 

Belts, Aluminum Oxide 

1x42” 

A14260 Belts Alum. Ox. 1x42” 60 grit 10 EA $1.16 $1.10 70 



A142600 

2x36” 

Belts Alum. Ox. 1x42” 600 grit 10 EA $1.16 $1.10 70 



A236400 

2x48” 







A248600J 

2x72” 

Belts Alum. Ox. 2x48” 600 grit (J Flex) 10 EA $2.70 $2.56 70 





A272120J Belts Alum. Ox. 2x72” 120 grit (J Flex) 10 EA $3.35 $3.18 70 





A272600J 

4x36” 

Belts Alum. Ox. 2x72” 600 grit (J Flex) 10 EA $3.35 $3.18 70 



A436100 

Belts, Ceramic 


C27260 Belts Ceramic 2x72” 60 grit 10 EA $8.90 $8.45 70 


Case Price 




Belts, Cubic Zirconia 

CZ14280 Belts Cubic Zirconia 1x42” 80 grit (HGR203) 10 EA $2.05 $1.95 70 






CZ272120 Belts Cubic Zirconia 2x72” 120 grit (Blue) 10 EA $4.00 $3.80 70 

CZ272120-G Belts Cubic Zirconia 2x72” 120 grit (HGR203) 10 EA $4.90 $4.65 70 

Belts, Silicone Carbide 

SC236400 Belts, Silicone Carbide 2x36” 400 grit 10 EA $3.99 $3.79 70 

SC272220 Belts, Silicone Carbide 2x72” 220 grit 10 EA $5.63 $5.35 70 

SC272400 

Belt Buffer 

Belts, Silicone Carbide 2x72” 400 grit 10 EA $5.63 $5.35 70 

114 Baldor Buffer 1/4 HP 1800 RPM EA $327.00 71 

Belt Grinders 

577101 Jet JBG-6A Bench Grinder, 6” x 3/4” Wheel EA $189.00 71 

577172 Jet Pedestal Stand for Bench Grinders EA $99.00 71 

Bench Grinder Attachment 

MT362 Multitool Belt Grinder Attachment EA $259.00 71 

MTBL Miter Table Attachment EA $74.99 71 

Belt Sanders & Attachments 

2048-151D Baldor Abrasive Belt Sander 2x48” EA $1,384.00 71 

577004 Jet Bench Belt & Disc Sander 2x42” EA $469.00 71 

TW90 Knifemakers Vertical/Horizontal Sander 2x72” EA $3,400.00 71 

TW90.Tbl TW90 Table *S/O EA $168.00 71 

TW90.whls 

Pipe Bender 

Small Wheels (K&G) EA $70.00 71 

331900 Jet 2” Hydraylic Pipe Bender, #JHPB-20 EA $394.00 71 

Jet Drill Presses, Saw and Hand Brake (*S/O ITEMS) 

354401 J-2500 15” Bench Model Drill Press EA $579.00 72 

354400 J-2500 15” Floor Model Drill Press EA $599.00 72 

414220 Jet J-F225 Manual Bench Cold Saw EA $1,099.00 72 

579002 Replacement Blade for Jet J-F225 Cold Saw EA $145.00 72 

414459 Jet HVBS-7MW Metalworking Bandsaw EA $1,449.00 72 

756216 Jet 48” Bench Hand Brake, Model #HB-1648H EA $1,699.00 72 

Beverly Shears/Slitting (*S/O ITEMS) 

442-B1 Beverly Shear B1 EA $563.00 73 

442-B2 Beverly Shear B2 EA $785.00 73 

442-B3 Beverly Shear B3 EA $1,135.00 73 

442-B1RB Replacement Blades for the B-1 Shear SET $94.00 73 



442-SS3 Beverly Slitting Shear SS3 EA $524.00 73 

442-S2RB Replacement Blades SS2 Slitting Shear SET $145.00 73 

442-S3RB Replacement Blades SS3 Slitting Shear SET $140.00 73 

752652 Jet Foot Shear, 16 Gauge EA $2,349.00 73 

755108K Jet SS-8T Slitting Shear w/Handle EA $229.00 73 

Sahinler Air Hammers and Accessories (*S/O ITEMS) 

SM50-1 Sahinler SM50 Air Hammer-1 Ph EA $11,750.00 74 

SM50-3 Sahinler SM50 Air Hammer-3 Ph EA $12,650.00 74 

Sahinler Air Hammers and Accessories 

SM50SB SM50 Welded Steel Base EA $1,175.00 74 

BLT-SM34 Belts for Sahinler SM34 SET $88.00 74 

BLT-SM5060 Belts for Sahinler SM50/60 SET $150.00 74 

WK-SM34 Wedge Keys for SM34 dies SET $35.00 74 

WK-SM5060 Wedge Keys for SM50/60 dies SET $35.00 74 

Power Hammer Dies, Free Form 

LDC Large Double Combo (Lg Dovetail) SET $550.00 75 

LDF Large Drawing/Fuller Combo (Lg Dovetail) SET $675.00 75 

LDD Large Drawing Dies (Lg Dovetail) SET $575.00 75 

LFD Large Flat Dies (Lg Dovetail) SET $450.00 75 

LTC Large Triple Combo (Lg Dovetail) SET $675.00 75 

SSD Sculpture Dies (Specify Dovetail) SET $550.00 75 

SDC Std. Dbl Combo (Specify Dovetail) SET $475.00 75 

SDF Std. Draw/Fullr Combo (Specify Dovetail) SET $575.00 75 

SFD Std. Flat Dies (Specify Dovetail) SET $400.00 75 

SFFC Std. Fullr/Flat Combo (Specify Dovetail) SET $550.00 75 

STMD Toolmakers Dies (Specify Dovetail) SET $475.00 75 

TWF Two Way Fuller Die (Specify Dovetail) SET $575.00 75 

WFD Wide Flat Die (Lg Dovetail) SET $475.00 75 

Power Hammer Dies, Swage 

BEF Ball End Finial Die (Specify Dovetail) SET $1,100.00 75 

BSD Ball Spindle Dies (Specify Dovetail) SET $1,100.00 75 

WTF Wedge Taper Flat Combo (Specify Dovetail) SET $600.00 75 

147


Case Price 


WWTC Wide Wedge Taper Dies (Lg Dovetail) SET $625.00 75 

SID Stake Insert Die (Specify Dovetail) EA $350.00 75 

SIDBS Stake Insert Die Blank (Specify Dovetail) EA $85.00 75 

Power Hammer Dies, Texture 

BTD Bark Texture Die (Specify Dovetail) SET $900.00 75 

CF Cross Fuller Texture Die (Specify Dovetail) EA $400.00 75 

PD Peening Texture Die (Specify Dovetail) EA $400.00 75 

Power Hammer Dies, Tool Holding 

HHH Hardy Hole Holder (Specify Dovetail) EA $475.00 75 

USD Upper Saddle Die (Lg Dovetail) EA $450.00 75 

Guillotine Fullers 

VFGF34 Victory Forge Guillotine Fuller 3/4” EA $118.00 76 



VFGF1 Victory Forge Guillotine Fuller 1” EA $118.00 76 

VFGF58 Victory Forge Guillotine Combo Fuller 5/8” EA $118.00 76 



VFGF1 Victory Forge Guillotine Combo Fuller 1” EA $118.00 76 

Nail Headers 

CDNH316 Pieh Nail Header 3/16” (4140 Steel) EA $25.00 76 

CDNH14 Pieh Nail Header 1/4” (4140 Steel) EA $25.00 76 

Power Hammer Punch Set 

PT-S715S 

Scrolling Jig 

Pieh Power Hammer Punch Set of 15 SET 365.00 76 

VF68 Victory Forge Scroll Jig 1/4x1” EA 45.00 76 

Spring Swages 

VFAC38 Victory Forge Spring Swage Acorn 3/8” EA $67.00 76 




VFAC1 Victory Forge Spring Swage Acorn 1” EA $67.00 76 

VFBA38 Victory Forge Spring Swage Ball 3/8” EA $67.00 76 




VFGR58 Victory Forge Spring Swage Grape 5/8” EA $67.00 76 

VFLB38 Victory Forge Spring Swage Leaf Blank 3/8” EA $67.00 76 

VFLB12 Victory Forge Spring Swage Leaf Blank 1/2” EA $67.00 76 

VFRO38 Victory Forge Spring Swage Rope 3/8” EA $67.00 76 

VFRO12 Victory Forge Spring Swage Rope 1/2” EA $67.00 76 

VFTE18 Victory Forge Spring Swage Tenon 3/16” EA $67.00 76 





VFVTR Victory Forge Spring Swage Vine Texture EA $67.00 76 

Texture Tools 

VFBTool Victory Forge Butt Tool EA 39.00 76 

VFLTool Victory Forge Leaf Sinking Tool EA 39.00 76 

Treadle Hammer & Dies 

MMTH The Mark Inline Treadle Hammer EA $1,000.00 77 

MMTH-PP The Mark Treadle Hammer Power Pack EA $500.00 77 

MM-PAD Die, Pein Anvil SET $175.00 77 

MM-DieSet6 Die, Pein Anvil SET $500.00 77 

Fly Presses 

CF0 Fly Press C Frame #0 EA $430.00 78 



CF3 Fly Press C Frame #3 EA $1,250.00 78 




CF8 Fly Press C Frame #8 *S/O EA POR 78 

S7 Punches 

BP125-FP Pieh Ball Punch 1/8 in EA $20.00 79 

BP188-FP Pieh Ball Punch 3/16 in EA $20.00 79 

BP250-FP Pieh Ball Punch 1/4” EA $20.00 79 




BP1000-FP Pieh Ball Style Punch 1” EA $31.50 79 

BP1125-FP Pieh Ball Style Punch 1-1/4” EA $33.00 79 

CP000-FP Pieh Center Punch EA $22.00 79 

DE000-FP Pieh Duck Eye Punch EA $22.00 79 

EE000-FP Pieh Eagle Eye Punch EA $22.00 79 

EP125-FP Pieh Eye Punch 1/8” EA $22.00 79 

148 

Case Price 




ES000-FP Pieh Eye Socket Punch EA $22.00 79 

HE000-FP Pieh Horsehead Ear Punch EA $22.00 79 

WE000-FP Pieh Wolf Eye Punch EA $22.00 79 

Fly Press Tooling 

PTFPBDF Pieh Bending Die/Forcer 1” SET $72.00 79 

PTFPF-3/8 Pieh Fuller Set 3/8” SET $74.00 79 




PTFPF-1 Pieh Fuller Set 1” SET $80.60 79 

PTCFP-M Pieh Mushroom 1” EA $62.00 79 

PTFPSBT Pieh Side Butcher SET $74.00 79 

PTCFP-VCL Pieh Veining Chisel Large EA $31.50 79 

PTCFP-VCS Pieh Veining Chisel Small EA $25.00 79 

Fly Press Accessories 

PTC1x2.5 Pieh Collar Blank EA $10.70 79 

PTC1x2.5D.5 Pieh Collar Blank, with drilled hole & S7 piece EA $12.60 79 

PTCP4/5/6 Pieh Crouchet Clamping Plate EA $64.00 79 

PTGB38-19 Pieh Crouchet Guided Bolster EA $36.00 79 

PTHB1-19 Pieh Crouchet Hardy Bolster EA $48.00 79 

PTSLV Pieh Sleeves EA $18.65 79 

Tooling Extensions, 1 inch shaft 

PTTE12 Pieh Tool Extension 1/2” EA $65.00 79 



PTTE1 Pieh Tool Extension 1” EA $65.00 79 

Tooling Extensions-Special Order (not shown in catalog) 

PTTE34.750 Pieh Tool Ext. 3/4 x 3/4” shaft *S/O EA $75.00 79 

PTTE12-1.25 Pieh Tool Ext. 1/2 x 1-14” shaft *S/O EA $75.00 79 

PTTE1-1.25 Pieh Tool Ext. 1 x 1-1/4” shaft *S/O EA $75.00 79 

PTTE1-1.50 PTC Crouchet FP Ext. 1” Rd, 1-1/2” Shank *S/O EA $75.00 79 

PTTE1.5-1.00 PTC Crouchet FP Ext. 1-1/2” Rd, 1” Shank *S/O EA $97.50 79 

PTTEF1.750 Pieh Tool FP Ext. 1” Round, 3/4” Shank *S/O EA $80.60 79 

PTTE12-.750 

Blast Gates 

Pieh Tool Ext. 1/2” Round, 3/4” Shank *S/O EA $80.60 79 

AG2 Full Air Gate 2 in EA $17.65 80 

AG3 

Blowers 

Full Air Gate 3 in EA $18.00 80 

PTC1203 Pieh/JG Blower #1203 EA $525.00 80 

BA0100013 JG Blower #1218 EA $608.00 80 

BA0100014 JG Blower #1219 EA $608.00 80 

BA0100002 

Coal/Coke 

JG Blower #1203 EA $834.00 80 

COAL Coal 50 lb Bag-Call for volume pricing 5 BAG $36.00 $34.20 80 

COKE Coke 50 lb Bag-Call for volume pricing 5 BAG $34.60 $32.87 80 

Coal Forge Equipment 

PTCF Pieh Coal Forge Frame Only EA $600.00 80 

PTCF-WP Pieh Coal Forge (Firepot, Tuyere) EA $1,195.00 80 

PTCF-WH Pieh Coal Forge (Firepot, Tuyere, Hood) EA $1,375.00 80 

PTCF-WB Pieh Coal Forge (Firepot, Tuyere, Blower) EA $1,475.00 80 

PTCF-WBH Pieh Coal Forge (Complete) EA $1,675.00 80 

PTHD Pieh Half Hood EA $180.00 80 

RLPOT Roger Lorance Fire Pot w/ Clincker EA $260.00 80 

TA Tuyere & Ash Dump EA $105.00 80 

Forge/Kiln Lining Supplies 

KW8 Kao Wool 8 lb 25 LFT $12.00 $9.15 80 

RCD Refractory Cement 50 LB $2.71 $2.20 80 

General Parts 

VFBarb Barb (Male) 1/4” Pipe Thread EA $2.88 80 

VFFer Ferrule EA $1.07 80 

PTReg Fisher Regulator 3-35 psi EA $47.00 80 

VFGV Gate Valve (Ball) 1/4” Pipe Thread Brass EA $17.00 80 

HOSE Hose (w/o Barb or Ferrule) FT $1.76 80 

VFH-6 LP Gas Hose (w/Barbs & Ferrules), 6’ EA $18.00 80 

VFH-10 LP Gas Hose (w/Barbs & Ferrules), 10’ EA $26.45 80 

VFOrif Orifice EA $3.57 80 

VFPol POL Fitting 1/4” MPT EA $7.65 80 

Babbitting Supplies and Ingots 

A NACFLX Acro No Acid Flux 9 oz can EA $7.00 81 

BABT Babbitt Damming Compound 5 lb BX $47.00 81 

BABT30 Babbitt Damming Compound 30 lb BX $203.00 CALL 81 

STM2 Babbitt ASTM2 Grade 2 Ingot (7-8 lb) *S/O EA $205.00 81 

ID10 Babbitt Ideal #10 Ingot (7-8 lb) *S/O EA $70.00 81 

NILT Babbitt Nickelite Metal Ingot (7-8 lb) *S/O EA $161.20 81 



Case Price 

Case Price 

Item# Description Qty U/M Price Break Pg Item# Description Qty U/M Price Break Pg 

BRTN Britannia Ingot (7-8 lb) *S/O EA $120.00 81 11600 Forgemaster Universal Forge Stand EA $195.00 83 

Surface Hardener 

Pieh Legacy Collection Gas Forge 

CHR-1 Cherry Red, Hardening Compound 1 lb EA $19.90 81 PTSPF-3 Pieh Tool, The Smithy’s Forge 3-Burner EA $1,195.00 84 

CHR-5 Cherry Red, Hardening Compound 5 lb EA $79.00 81 PTSPF-3Insert Pieh Tool, The Smithy’s Forge Insert Shelf EA $140.00 84 

CHR-25 Cherry Red, Hardening Compound 25 lb EA $260.00 81 VFPF-C Victory Forge 2 Burner (L.P. Gas) EA $470.00 84 

Tinning Compounds 

VFPF-CB Victory Forge 2 Burner with Bricks (L.P. Gas) EA $490.00 84 

ACTIN Acro Soder Tinning Compound EA $38.45 81 Furnace Forges 

ACSOD Acro Soder Tinning Paste EA $50.00 81 122 Model *ALL JOHNSON GAS MODELS ARE SPECIAL ORDER ITEMS. 

Welding Fluxes 

AA-06-00014 JG 122 Dbl Width Furnace (L.P. Gas) TSC EA $4,850.00 85 

AWB1 Anhydrous White Borax, 1 lb EA $10.65 81 AA-06-00021 JG 122 Dbl Width Furnace (L.P. Gas) UV EA $5,380.00 85 

ABC8 Anti-Borax Aluminum Welding Flux No. 8, 1 lb EA $49.75 81 AA-06-00002 JG 122 Dbl Width Furnace (Nat. Gas) TSC EA $4,850.00 85 

ABBF1 Brazing Flux No 2 (Anti-Borax) 1 lb EA $8.75 81 AA-06-00009 JG 122 Dbl Width Furnace (Nat. Gas) UV EA $5,380.00 85 

CW1 Crescent Weld Compound (Anti-Borax) 1 lb EA $10.25 81 AA-06-00013 JG 122 Furnace (L.P. Gas) TSC EA $4,110.00 85 

FB1 Forge Borax (Anti-Borax) 1 lb EA $10.95 81 AA-06-00020 JG 122 Furnace (L.P. Gas) UV EA $4,650.00 85 

FB5 Forge Borax (Anti-Borax) 5 lb EA $48.85 81 AA-06-00001 JG 122 Furnace (Nat. Gas) TSC EA $4,110.00 85 

SW Mustad Sure-Weld 12 oz. EA $16.70 81 AA-06-00008 JG 122 Furnace (Nat. Gas) UV EA $4,650.00 85 

PEZ1 Pieh E-Z Weld (Anti-Borax) 1 lb EA $10.95 81 133 Model *ALL JOHNSON GAS MODELS ARE SPECIAL ORDER ITEMS. 

PEZ5 Pieh E-Z Weld (Anti-Borax) 5 lb EA $48.85 81 AA-06-00016 JG 133 Dbl Width Furnace (L.P. Gas) TC EA $10,150.00 85 

SSW1 Super Stable Weld (Anti-Borax) 1 lb EA $10.25 81 AA-06-00023 JG 133 Dbl Width Furnace (L.P. Gas) UV EA $10,700.00 85 

Welding Rods 

AA-06-00011 JG 133 Dbl Width Furnace (Nat. Gas) UV EA $10,700.00 85 

BORC Borium Flux Coated Rod Course EA $18.80 81 AA-06-00004 JG 133 Dbl Width Furnace (Nat. Gas) TC EA $10,150.00 85 

BORF Borium Flux Coated Rod Fine EA $18.80 81 AA-06-00015 JG 133 Furnace (L.P. Gas) TC EA $8,440.00 85 

BORM Borium Flux Coated Rod Medium EA $18.80 81 AA-06-00022 JG 133 Furnace (L.P. Gas) UV EA $8,960.00 85 

Gas Forges (Knifemaker) 

AA-06-00010 JG 133 Furnace (Nat. Gas) UV EA $8,960.00 85 

*Mankel: Free shipping in Continental USA for online & catalog orders. 

AA-06-00003 JG 133 Furnace (Nat. Gas) TC EA $8,440.00 85 

Handling and insurance excluded. 

AA-06-00017 JG 133 Dbl Length Furnace (L.P. Gas) EA $16,840.00 85 

MKOE2RP Mankel KnifeMaker Open Ends 2 Burner EA $941.00 82 AA-06-00005 JG 133 Dbl Length Furnace (Nat. Gas) EA $16,840.00 85 

MKOE2RN Mankel KnifeMaker Open Ends 2 Burner (NG) EA $941.00 82 AA-06-00024 JG 133 Dbl Length, Dbl Wide Furn. (L.P. Gas) EA $19,650.00 85 

MKO3RP Mankel KnifeMaker Open Ends 3 Burner EA $1,180.00 82 AA-06-00012 JG 133 Dbl Length, Dbl Wide Furn. (Nat. Gas) EA $19,650.00 85 

MKO3RN Mankel KnifeMaker Open Ends 3 Burner (NG ) EA $1,180.30 82 AA-06-00019 JG 133 Special Width Furnace (L.P. Gas) EA $22,090.00 85 

Gas Forge (Mankel) Accessories 

AA-06-00007 JG 133 Special Width Furnace (Nat. Gas) EA $22,090.00 85 

MOM Mankel Orifice & Mixer (Specify LP or NG) PR $12.50 

MHOSE-8 Mankel Hose 8’ (LP) EA $21.70 

MBrick Mankel Thermotect Board EA $31.90 

Gas Forges (Blacksmith) 

*NC: Online or catalog price only. 

*Items for pick up in our store will include added shipping charges. 

NCDAD2-OE NC Daddy 2, End Ports EA $695.00 

NCDAD2 NC Daddy 2, Front Port/Back Door EA $650.00 

NCLB-OE NC Lowboy End Ports EA $615.00 

*Forgemaster: Online or catalog price only. 


50000 Forgemaster Blacksmith EA $775.00 

50002 Forgemaster Blacksmith (Dual Valve) EA $850.00 

60000 Forgemaster 2000 (Stainless) EA $1,215.00 



MOE3115P Mankel Shop Model EA $1,180.00 

Gas Forge (Forgemaster) Accessories 

*Forgemaster Reliners: Online or catalog price only. 


Reliners 

50103 Forgemaster Blacksmith Reliner Kit EA $145.00 

10119 Forgemaster Companion Reliner Kit EA $110.00 

30103 Forgemaster E-1 Reliner Kit EA $145.00 

40109 Forgemaster Excalibur Reliner Kit EA $145.00 

20111 Forgemaster Farrier Reliner Kit EA $130.00 

30107 Forgemaster Blacksmith/E1/2000 Door Liner EA $12.00 

20112 Forgemaster Blacksmith/Farrier Wall Kit EA $57.10 

20109 Forgemaster Blacksmith/Farrier Top Liner EA $48.70 

20104 Forgemaster Hearth Brick (Blcksmth/Farr/Excal) EA $42.80 

60106 Forgemaster Hearth Brick (2000) EA $40.60 

30108 Forgemaster Window Guard EA $14.00 

Parts 

10127 Forgemaster 9 ft. Hose EA $38.90 

50106 Forgemaster Blacksmith/2000 Fuel Hose EA $20.15 

10105 Forgemaster Ignitor EA $14.00 

10106 Forgemaster Lead Wire with Terminal EA $3.70 

10101 Forgemaster Orifice EA $3.25 

10126 Forgemaster Regulator Kit KIT $89.30 

10107 Forgemaster Spark Plug EA $12.00 

*Forgemaster Accessories: Online or catalog price only. 

82 

82 

82 

82 

82 

82 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

83 

AA-06-00018 JG 133 Triple Width Furnace (L.P. Gas) EA $20,100.00 

AA-06-00006 JG 133 Triple Width Furnace (Nat. Gas) EA $20,100.00 

Gas Forge Accessories, Cliff Carroll 

Reliner Kit Online or catalog price only. 

*Pick up in our store will include added shipping charges. 

PF-201 C. Carroll Pro-Forge Reliner Kit EA $169.00 

PF-223 C. Carroll Pro-Forge Welding Plate EA $15.65 

Gas Forges (Farrier) 

*Cliff Carroll, Forgemaster: Online or catalog price only. 


PF-200 C. Carroll Pro-Forge EA $664.00 

10000 Forgemaster Companion EA $475.00 

30000 Forgemaster E-1 EA $665.00 

40000 Forgemaster Excalibur EA $720.00 

20000 Forgemaster Farrier EA $630.00 



MOE2+4115P Mankel Horseshoers EA $941.00 

*NC: Online or catalog price only. 


NCBABY NC Whisper Baby Single Burner EA $410.00 

NCWD-BD NC Whisper Deluxe Rear Port EA $455.00 

NCWM-OE NC Whisper Momma Open End Ports EA $565.00 

Gas Forge Accessories, NC 

*NC Reliners: Online or catalog price only. 


Forge Parts 

01356 NC Hose EA $18.60 

0140 NC Quick Lite #3 (cast iron burners) EA $23.00 

0140A NC Quick Lite #2 (old Al and cast iron burners) EA $23.20 

0144 NC Orifice EA $1.50 

0168 NC Ball Valve EA $10.00 

0197A NC Welding Brick EA $16.80 

Reliners 

0132 NC Reliner Kit for Daddy EA $199.80 

0133 NC Reliner Kit for Low Boy EA $179.50 

0135 NC Reliner Kit for Whisper Deluxe (prior 1989) EA $148.00 

0136 NC Reliner Kit for Whisper Deluxe (after 1990) EA $148.00 

0137 NC Reliner Kit for Momma (prior 1989) EA $153.36 

0138 NC Reliner Kit for Momma (after 1990) EA $153.36 

0182 NC Low Boy Door Liner EA $21.50 

85 

85 

86 

86 

86 

86 

86 

86 

86 

86 

87 

87 

87 

87 

87 

87 

87 

87 

87 

87 

87 

87 

87 

87 

87 

87 


Crucible Furnaces and Accessories 

Accessories 

900 Model *ALL JOHNSON GAS MODELS ARE SPECIAL ORDER ITEMS. 

11500 Forgemaster Swingmaster EA $290.00 83 AA-07-00022 JG Crucible 900 Furnace (L.P. Gas) EA $3,860.00 88 

AA-07-00023 JG Crucible 900 Furnace (L.P. Gas) EA $3,940.00 88 



149


Case Price 





AA-07-00001 JG Crucible 900 Furnace (Nat. Gas) EA $3,860.00 88 

Crucible Furnaces and Accessories - continued 






900 SM Model *ALL JOHNSON GAS MODELS ARE SPECIAL ORDER ITEMS. 

AA-07-00026 JG Crucible 900 SM Furnace (L.P. Gas) EA $4,440.00 88 

AA-07-00039 JG Crucible 900 SM Furnace (L.P. Gas) EA $4,970.00 88 

AA-07-00005 JG Crucible 900 SM Furnace (Nat. Gas) EA $4,440.00 88 

AA-07-00018 JG Crucible 900 SM Furnace (Nat. Gas) EA $4,970.00 88 

900 SS Model *ALL JOHNSON GAS MODELS ARE SPECIAL ORDER ITEMS. 

AA-07-00027 JG Crucible 900SS Furnace (L.P. Gas) EA $5,700.00 88 


AA-07-00006 JG Crucible 900SS Furnace (Nat. Gas) EA $5,700.00 88 


920 Models *ALL JOHNSON GAS MODELS ARE SPECIAL ORDER ITEMS. 







920 SS Model *ALL JOHNSON GAS MODELS ARE SPECIAL ORDER ITEMS. 









Console *ALL JOHNSON GAS MODELS ARE SPECIAL ORDER ITEMS. 

HA-04-00457 JG Console for 920/950 Furnace EA $4,360.00 88 

Crucibles and Accessories 

Crucibles *ALL CRUCIBLE ITEMS ARE SPECIAL ORDER. 

25-02-00001 #4 Crucible-Graphite EA $75.00 88 


25-02-00004 #10 Crucible-Silicon Carbide EA $135.00 88 

25-02-00008 #10 Bottom Pour Crucible EA $150.00 88 

25-02-00007 #16 Bottom Pour Crucible EA $175.00 88 



25-02-00009 #20 Crucible EA $150.00 88 


25-02-00011 #30 Crucible EA $180.00 88 






Crucible Tongs *ALL CRUCIBLE ITEMS ARE SPECIAL ORDER. 

30-01-00001 Tong for Crucible #10 EA $437.00 88 



30-01-00006 Tong (Bent) for Crucible #10 EA $585.00 88 




Adjustable Crucible Shanks *ALL CRUCIBLE ITEMS ARE SPECIAL ORDER. 

30-01-00011 Hand Shank for Crucible #10 & #16 EA $400.00 88 

30-01-00013 Fixed Band Shank, Single End w/Safety 

for #10 and #16 Crucibles EA $557.00 88 

30-01-00014 Fixed Band Shank, Single End w/Safety 

for #20 and #30 Crucibles EA $622.00 88 

Ceramic Shell Burnout Furnaces and Accessories 

99-IN-MISC28 JG Ceramic Shell Burnout Furnace 28” *S/O EA $16,470.00 89 

99-IN-MISC36 JG Ceramic Shell Burnout Furnace 36” *S/O EA $20,410.00 89 

99-IN-EXT28 JG 12” Extension for 28” Furnace *S/O EA $662.00 89 

99-IN-EXT36 JG 12” Extension for 36” Furnace *S/O EA $662.00 89 

Blacksmith Kits 

B-K1 Pieh Blacksmith Kit 1 Kit $440.68 90 

B-K2 Pieh Blacksmith Kit 2 Kit $1,141.46 90 

150 

Case Price 


B-K3 Pieh Blacksmith Kit 3 Kit $3,227.93 90 

Clothing - Men’s Work shirts 

Logger Shirt, Button Front 

575.47.S Key Stripe Logger Buttton Shrt, Long Sleeve, S $36.90 91 

575.47.M Key Stripe Logger Buttton Shrt, Long Sleeve, M $36.90 91 

575.47.L Key Stripe Logger Buttton Shrt, Long Sleeve, L $36.90 91 

575.47.XL Key Stripe Logger Buttton Shrt, Long Sleeve, XL $36.90 91 

575.47.2XL Key Stripe Logger Buttton Shrt, Long Sleeve, 2XL $36.90 91 

575.47.3XL Key Stripe Logger Buttton Shrt, Long Sleeve, 3XL $40.60 91 

575.47.T.M Key Stripe Logger Buttton Shrt, Long Sleeve, M Tall $40.60 91 

575.47.T.L Key Stripe Logger Buttton Shrt, Long Sleeve, L Tall $40.60 91 

575.47.T.XL Key Stripe Logger Buttton Shrt, Long Sleeve, XL Tall $40.60 91 

575.47.T.2XL Key Stripe Logger Buttton Shrt, Long Sleeve, 2XL Tall $40.60 91 

575.47.T.3XL Key Stripe Logger Buttton Shrt, Long Sleeve, 3XL Tall $40.60 91 

Logger Shirt, Pullover 

573.47.M Key Stripe Logger Pullover, Zip Frnt, Long Sleeve, M $36.90 91 

573.47.L Key Stripe Logger Pullover, Zip Frnt, Long Sleeve, L $36.90 91 

573.47.XL Key Stripe Logger Pullover, Zip Frnt, Long Sleeve, XL $36.90 91 

573.47.2XL Key Stripe Logger Pullover, Zip Frnt, Long Sleeve, 2XL $36.90 91 

573.47.3XL 

Welders Shirt 

Key Stripe Logger Pullover, Zip Frnt, Long Sleeve, 3XL $40.60 91 

519.24.S Key Western Welder Shirt, w/Snaps, Long Sleeve, S $32.80 91 

519.24.M Key Western Welder Shirt, w/Snaps, Long Sleeve, M $32.80 91 

519.24.L Key Western Welder Shirt, w/Snaps, Long Sleeve, L $32.80 91 

519.24.XL Key Western Welder Shirt, w/Snaps, Long Sleeve, XL $32.80 91 

519.24.2XL Key Western Welder Shirt, Long Sleeve, 2XL $32.80 91 

519.24.3XL Key Western Welder Shirt, Long Sleeve, 3XL $36.10 91 

519.24.T.L Key Western Welder Shirt, Long Sleeve, L Tall $36.10 91 

519.24.T.XL Key Western Welder Shirt, Long Sleeve, XL Tall $36.10 91 

519.24.T.2XL Key Western Welder Shirt, Long Sleeve, 2XL Tall $36.10 91 

519.24.T.3XL Key Western Welder Shirt, Long Sleeve, 3XL Tall $36.10 91 

Pieh Tool Gift Items 

Hats 

PHat-BL Pieh Hat, Blue $18.00 91 

PHat-KH Pieh Hat, Khaki $18.00 91 

PHat-BK 

Shirts 

Pieh Hat, Black $18.00 91 

PiehT-S Pieh T-Shirt, Small, White $20.00 91 

PiehT-S.A Pieh T-Shirt, Small, Ash $20.00 91 

PiehT-S.N Pieh T-Shirt, Small, Natural $20.00 91 

PiehT-S.S Pieh T-Shirt, Small, Sand $20.00 91 

PiehT-M Pieh T-Shirt, Med, White $20.00 91 

PiehT-M.A Pieh T-Shirt, Med, Ash $20.00 91 

PiehT-M.N Pieh T-Shirt, Med, Natural $20.00 91 

PiehT-M.S Pieh T-Shirt, Med, Sand $20.00 91 

PiehT-L Pieh T-Shirt, Large, White $20.00 91 

PiehT-L.A Pieh T-Shirt, Large, Ash $20.00 91 

PiehT-L.N Pieh T-Shirt, Large, Natural $20.00 91 

PiehT-L.S Pieh T-Shirt, Large, Sand $20.00 91 

PiehT-XL Pieh T-Shirt, XL, White $20.00 91 

PiehT-XL.A Pieh T-Shirt, XL, Ash $20.00 91 

PiehT-XL.N Pieh T-Shirt, XL, Natural $20.00 91 

PiehT-XL.S Pieh T-Shirt, XL, Sand $20.00 91 

PiehT-2X Pieh T Shirt, 2X, White $20.00 91 

PiehT-2X.A Pieh T Shirt, 2X, Ash $20.00 91 

PiehT-2X.N Pieh T Shirt, 2X, Natural $20.00 91 

PiehT-2X.S Pieh T Shirt, 2X, Sand $20.00 91 

PiehTLS-M Pieh Long Sleeve Shirt, Med, White $24.00 91 

PiehTLS-M.A Pieh Long Sleeve Shirt, Med, Ash $24.00 91 

PiehTLS-L Pieh Long Sleeve Shirt, Large, White $24.00 91 

PiehTLS-XL Pieh Long Sleeve Shirt, XL, White $24.00 91 

PiehTLS-XL.A Pieh Long Sleeve Shirt, XL, Ash $24.00 91 

PiehTLS-2X Pieh Long Sleeve Shirt, 2X, White $24.00 91 

PiehTLS-2X.A Pieh Long Sleeve Shirt, 2X, Ash $24.00 91 

Tavern Puzzles 

PZ-BEST Tavern Puzzle, Best Ever $22.00 91 

PZ-BLKJ Tavern Puzzle, Black Jack $22.00 91 

PZ-BKRG Tavern Puzzle, Blackbeard’s Revenge $22.00 91 

PZ-DBTR Tavern Puzzle, Double Trouble $22.00 91 

PZ-FREE Tavern Puzzle, Freedom’s Ring $22.00 91 

PZ-IRHT Tavern Puzzle, Iron Heart $22.00 91 

PZ-TVWO Tavern Puzzle, Traveler’s Woe $22.00 91 

PZ-UTRN Tavern Puzzle, U-Turn $22.00 91 



Case Price 

Case Price 

Item# Description Qty U/M Price Pg Break Range Pg Item# Description Qty U/M Price Pg Break Range 

Pg 

BOOKS (Pages 92 - 123, Alphabetical by Title) 

BK213 Contemporary Blacksmith, Meilach $49.95 92-123 

BK50 101 Things/Build From Horseshoes; Dohrmann $13.30 92-123 BK143 Cooper and His Trade, Kilby $21.95 

BK676 5 Shoes, 1 Shoe Board; Gregory $8.95 

BK163 Copper Candle Cups, Chapman $6.00 

BK614 50 dollar Knife Shop; Goddard $19.95 

BK740 Copper Candle Cups II, Chapman $10.95 

BK990 500 Knives, Celebrating Traditional & Innovative $24.95 

BK440 Copper Work; Rose $7.95 

BK984 500 Metal Vessels - Contemporary Explorations $24.95 

BK469 Custom Knifemaking; McCreight $24.80 

BK781 ABC’s of Blacksmithing; Fridolin Wolf $48.95 

BK646 Damascus Steel, Sachse $140.00 

BK76 AFA Cert. Study Guide-Certified/Intern; Blombach $25.95 

BK212 Decorative and Sculptural Ironwork, Meilach $34.95 

BK75 AFA Cert. Study Guide-Journeyman; Blombach $25.95 

BK977 Decorative Architectural Ironwork, Fetauring Wrought $39.95 

BK991 Albert Paley Sculpture, Kuspit $80.00 

BK671 Decorative Ironwork of Italy, Pedrini $45.00 

BK173 Alfred Habermann, Elgass $59.00 

BK758 Descriptive Drawing ; Baum (2 Book Set) $44.00 

BK835 Ancient Axes (Northern European); Gransfors $5.00 

BK957 Dictionary of American Hand Tools, Sellens $39.95 

BK953 Antique Swords & Daggers, Veleanu, Hayes $79.95 

BK972 Diderot’s 1751 Enclopaedia on Chasing, Lewton-Brain $15.50 

BK449 Antler & Iron II; Chapman $12.00 

BK833 Digital Temperature Control for the Blacksmith Forge $24.95 

CD796 Antler and Iron II; Oak and Iron (Book on CD) $12.00 

BK588 Direct Metal Sculpture, Meilach $39.95 

BK93 Anvils in America, Postman $66.50 

BK788 Early American Wrought Iron; Sonn $135.00 

BK604 Architectural Ironwork, Meilach $49.95 

BK827 Edgar Brandt: Master of Art Deco Ironwork; Kohr $79.99 

BK2 Arms & Armor, Fliegel $55.00 

BK180 Elementary Forge Practice, Harcourt $9.95 

BK975 Art Deco Ironwork & Sculpture, Cook III, Skinner $49.95 

BK617 Engraving Metals, Hasluck $9.95 

BK927 Art Forms in the Plant World; Blossfeldt $14.95 

BK814 Equine Veterinary Medicine Guide, The $35.00 

BK764 Art Nouveau Ironwork of Austria/Hungary; Gacher $49.95 

BK192 Expose of Repousse, Heath $12.00 

BK668 Art Nouveau Typographic Ornaments, Solo $11.95 

BK619 Fabulous Jewelry from Found Objects; Levan $14.95 

BK157 Art of Blacksmithing, The, Bealer $9.95 

BK968 Fancy Knives - Materials and Decorative Techniques $29.99 

BK413 Art of Coppersmithing; Fuller $25.00 

BK722 Farm Blacksmithing; Drew $13.25 

BK739 Art of Engraving: A Book of Instructions; Meek $47.95 

BK7 Fashion & Armour of the Renaissance Europe, Patterson $30.00 

BK950 Art of Mail Armor, The: How to Make Your Own $29.00 

BK709 Feuer und Stahl (Hamburg) $18.40 

BK973 Art of Mechanical Drawing, The -A Practical Course $10.00 

BK997 Finishing: Methods of Work, Richey $12.95 

BK938 Art of the Knife, Kertzman $35.00 

BK732 Fireplace Accessories; Meilach $49.95 

BK721 Artist Blacksmith: Design/Techniques; Parkinson $50.00 

BK799 Foldforming, Lewton-Brain $35.00 

BK15 Artistic Horseshoeing; Rich $19.95 

BK524 Foot Of Horse, Roberge, $23.95 

BK974 Axe and Man, The, Heavin $25.00 

BK932 Forged Architectural Metalwork; Parkinson $45.00 

BK834 Axe Book, The; Gransfors $5.00 

BK239 Form Emphasis for Metalsmiths, Seppa $18.00 

BK531 Babbitt Bearing Techniques; Machinery Magazine $5.95 

BK980 Formed of Fire, Dunham $29.95 

BK279 Babbitting Manual; Carbonite Metal Co. $3.95 

BK981 Found Object Art, Spencer $49.95 

BK763 Backyard Blacksmith, The; Sims $24.99 

BK982 Found Object Art 2, Skinner $49.95 

BK181 Basic Blacksmithing, Harries and Heer $29.95 

BK942 From Fire to Form, Clarke $50.00 

BK756 Basics of Style for Artist Blacksmiths; Metzger $36.00 

BK731 Gas Burners for Forges, Furnaces & Kilns; Porter $19.95 

BK98 Beaded Chain Mail Jewelry: Timeless Techniques $24.95 

BK710 Gestaltetes Metall: Gitter-Tore $18.90 

BK916 Beautiful Iron: Pursuit of Excellence; Whitaker $38.00 

BK983 George Rickey, The Early Works, Davidson III *S/O $79.95 

BK186 Beginning Blacksmithing; Heath $38.00 

BK999 Gunstock Carving, Janney $19.95 

BK184 Bent Ironwork, Hasluck $9.95 

BK774 Hand Forging and Wrought-Iron; Googerty $10.95 

BK755 Better Basics, Lessiter Pub. $17.95 

BK989 Handbook for Ironmongers: A Glossary of Ferrous $22.00 

BK720 Blacksmith and his Art; Hawley $19.95 

BK273 Hardening, Tempering and Heat Treatment; Cain $25.70 

BK734 Blacksmith Craft: Vol. 1; Dixon $52.00 

BK403 Hardening, Tempering, Annealing; Woodworth $12.95 

BK202 Blacksmith Shop and Iron Forging, Lindsay $7.50 

BK78 Heat Treatment, Selection, Tool Steels; Bryson $49.95 

BK723 Blacksmith, Ironworker and Farrier; Watson $21.00 

BK823 Heintz Art Metal; McConnell $19.95 

BK806 Blacksmithing Basics for the Homestead; DeLaRonde $15.99 

BK777 Heritage in Iron, A; Rafael Routson $50.00 

BK590 Blacksmithing for Beginners, Morre $29.95 

BK955 Heritage of English Knives, Hayden-Wright $95.00 

BK967 Blacksmithing - Hot Techniques & Striking Projects, Ares $23.00 

BK131 Historical Guide to Wagon Hardware; Spivey $18.95 

BK182 Blacksmithing Instructors’ Guide, Harries $29.95 

BK100 Home Design Detail Series-Architectural Hardware, Berry $24.99 

BK206 Blacksmithing Primer, McDaniel $25.00 

BK22 Hoof Care for Horses; Heymering $4.10 

BK995 Blacksmithing Projects, Blandford $12.95 

BK77 Hoof Talk: The Hairline Tells It All, Bergeleen $24.85 

BK23 Blacksmith’s & Hammerman’s Emporium , Freund $28.00 

BK14 Horse Owners Guide to Natural Hoof Care; Jackson $29.95 

BK225 Blacksmith’s Craft, McRaven $19.95 

CD915 Hot Shop, Chapman (Book on CD) $10.95 

BK976 Bronze Sculpture Casting & Preparation, Hurst $125.00 

CD797 Hot Shop II; Chapman (Book on CD) $10.95 

BK959 Boone Wrought Iron, Plummer Design Workshop $19.95 

BK611 How I Pour Babbitt Bearings, Gingery $7.95 

BK735 Brass & Alloy Founding; Maynard $7.95 

BK210 How to Build a Blacksmith’s Firepot, Meador $12.95 

BK304 Building a Gas Fired Crucible Furnace-Gingery $12.95 

BK211 How to Build a Full Size Coal Forge, Meador $12.95 

BK332 Building the Gas Forge and Foundry; Kern $15.00 

BK278 How to Cast Small Metal and Rubber Parts,Cannon $14.95 

BK761 Catching the Fire: Philip Simmons; Lyons $17.00 

BK582 How to Forge Weld on Blacksmiths’ Anvil; Heath $12.00 

BK91 Cavalry Horseshoer’s Technical Manual $16.95 

BK16 How To Horseshoeing Book, West $19.95 

BK952 Chain Mail Jewelry, Taylor, Terry & Whyte, Dylon $24.95 

BK583 How to Make a Blacksmith’s Bellows, Heath $7.00 

BK295 Charcoal Foundry; Gingery $7.95 

BK185 How to Make a Chain Mail, Heath $7.00 

BK954 Charleston Ironwork - A Photographic Study, Bayless $36.95 

BK964 How to Make a Chain Tool for Chasing, Lewton-Brain $18.00 

BK585 Chasing: Ancient Metalworking Technique, Lewis $19.95 

BK362 How to Make a Metal Bending Machine; Mann $11.95 

BK736 Classic French Wrought Iron; Lecoq $29.95 

BK446 How to Make Knives; Barney/Loveless $17.99 

BK757 Classical Techniques Hand Forged Iron; Metzger $32.00 

BK350 How To Run 3-Phase Motors; Lindsay $3.50 

BK773 Classical Wrought Ironwork; Tunstall Small $7.95 

BK657 How to Sell What You Make; Gerhards $14.95 

BK97 Choosing and Using Hand Tools; Rae $17.95 

BK929 How to Teach Yourself Blacksmithing with Clay; Meador $12.95 

BK667 Coal Heat; Schuler and Hull $5.95 

BK454 Iron Age Primitives; Chapman $8.95 

BK978 Colouring, Bronzing and Patination of Metals, The $85.00 

BK68 Iron Menagerie, Guild of Metalsmiths $20.00 

BK460 Complete Bladesmith; Hrisoulas $48.35 

BK931 Ironwork Today: Inside and Out; Meilach $49.95 

BK586 Complete Metalsmith, McCreight $30.00 

BK805 Ironwork Today 2; Snyder $50.00 

BK250 Complete Modern Blacksmith, Weygers $19.95 

BK821 Ironwork Today 3: Inside and Out, Snyder $50.00 

BK795 Complete Working Guide/Begin. Blacksmith; MacKay $35.00 

BK933 Ironwork: Dynamic Details; Meilach $39.95 

CD795 Complete Working Guide Begin. Blacksmith (Book on CD) $15.00 

BK828 Italian Ironwork Medieval, Baroque, Neo; Farrari $29.99 

BK814 Comprehensive Guide to Equine Vetinary Medicine, The $35.00 

BK170 Japanese Patinas; Eitoku Sugimori $24.00 


151


Case Price 

Item# Description Qty U/M Price Pg Break Range 

Pg 

DVD56 Japanese Silk Wrapped Handles, Polzien $45.00 92-123 

BK472 Japanese Sword; Sato $40.00 

BK987 Jeweler’s Directory of Decorative Finishes, The, McGrath $24.99 

BK971 Jeweler’s Studio Handbook, Holschuh $24.99 

BK962 Karl Blassfeldt - The Alphabet of Plants, Mattenklott $18.00 

BK965 Karl Blassfeldt - The Complete Published Work, Adam $38.00 

BK812 Keum Boo , Hot Burnished Gold Foil $24.95 

BK831 Knifemaking with Bob Loveless, Hollis $29.99 

BK951 Knights in Shining Armor, Sinkevic $35.00 

BK939 Laminitis & Founder, Butler-Gravlee $29.95 

BK713 Leben und Arbeiten am Wasser $16.80 

BK217 Life Force at the Anvil, Joyce $15.00 

BK633 Little Giant Power Hammer; Kern $35.00 

CD798 Little Uglies II; Chapman (Book on CD) $12.00 

BK88 Lives Shaped by Steel; Zastrow $45.00 

BK290 Lost; Wax Casting; Feinberg $25.95 

BK941 Make Your Own Woodworking Tools, Burton $19.95 

BK809 Making a Copper Weathervane, Helmreich $29.99 

BK900 Making Metal Beads, Warg $17.95 

BK1001 Making Metal Jewelry: Progects, Techniques...; Gollberg $14.95 

BK807 Making Natural Hoof Care Work For You, Ramey $26.95 

BK241 Manual of Blacksmithing; Smith $9.95 

BK461 Master Bladesmith; Hrisoulas $46.00 

BK782 Master Fundamentals-Vol I Blacksmithing; Aspery $59.00 

BK690 Master the Fundamentals-Vol II Leaf-Work; Aspery $59.00 

BK616 Mastermyr Find; Arwidsson & Berg $17.95 

BK808 Masterpieces of 18th Century French Ironwork, Contet $19.95 

BK29 Mechanics of Horseshoeing; Simpson $27.00 

BK8 Mediterranean House in America, The; Bricker, Nogai $50.00 

BK328 Melting Iron in the Cupola; Hurst $9.95 

BK910 Metal Clay Beads; Becker-Simon $24.95 

BK988 Metal Corrugation-Surface Embellishment, McAleer $37.95 

BK979 Metal Embossing Workshop, Muldoon $24.95 

BK956 Metal - Forming, Forging, and Soldering Techniques, Ares $29.99 

BK259 Metalcasting; Ammen $37.95 

BK172 Metall Design Int’l 1999, Elgass $60.00 













BK204 Metals Technic; McCreight $17.95 

BK205 Metalsmith’s Book of Boxes/Lockets; McCreight $30.00 

BK183 Metalworking, Hasluck $34.95 

BK819 Mexican Art Series: Hammered Copper, Baum $29.99 

BK826 Mexican Jewelry and Metal Art; Pina $89.99 

BK822 Mexican Silver: 20th Century Hand Wrought Jewelry $59.95 

BK630 Milling Machine Operations; Barritt $9.95 

BK813 Mixed Metals; Hettmansperger $24.95 

BK824 More Roycraft Art Metal; McConnell $19.95 

BK798 Mousehole Forge; Postman $26.50 

BK914 Moving Metal, Adolf Steins $34.95 

BK998 Museum of Early American Tools, A, Sloane $8.95 

BK917 My Life As An Artist Blacksmith; Whitaker $38.00 

BK92 Nahum Hersom, Repousse $25.00 

BK928 Natural Art Forms, Blossfeldt $15.95 

BK104 Natural Balance Hoof Care Book & DVD Educat. Set $150.00 

BK105 Natural Balance Hoof Care Book & DVD Ultimate Pack $199.00 

BK61 Natural Horse; Jackson $24.95 

BK94 Natural Trim $18.85 

BK63 New Edge of the Anvil; Andrews $25.00 

BK525 New Hope for Soundness, Ovnicek $12.00 

BK453 Nose to the Grindstone; Chapman $8.95 

BK54 Oxen; A Teamsters Guide; Conroy $25.00 

BK752 Packers Field Manual; Hoverson $19.95 

BK140 Packing In On Mules; Elser & Brown $18.00 

BK83 Passion and Power-Metal Artists in the Western US $65.00 

BK200 Patinas for Small Studios, Lewton Brain $19.95 

BK759 Pattern Book for Artist Blacksmiths; Metzger $50.00 

BK462 Pattern Welded Blade; Hrisoulas $30.00 

152 

Case Price 

Item# Description Qty U/M Price Pg Break Range Pg 

BK596 Plain & Ornamental Forging, Schwarzkopf $21.95 92-123 

BK784 PMC Decade, McCreight $35.00 

BK785 PMC Technic; McCreight $30.00 

BK158 Practical Blacksmithing/Metalworking, Blandford $24.95 

BK312 Practical Metal Platework; Hasluck $10.95 

BK49 Principle of Horseshoeing (P3); Butler $167.00 

BK242 Professional Smithing, Streeter $22.95 

BK1000 Pure Silver Metal Clay Beads, Kaye, Moses $24.99 

BK464 Razor Edge Book of Sharpening; Juranitch $21.95 

BK818 Ready, Set, Weld; Matin $21.95 

BK203 Roycroft Art Metal, McConnell $16.95 

BK103 Scientific Horseshoeing; Russell $41.35 

BK824 Scroll Sawing in Metal: Patterns and Techniques $14.95 

BK658 Secrets of Building and Alcohol Still, Gingery $12.95 

BK811 Setting Stones in Metal Clay; Landenwitch $27.50 

BK650 Sharpening & Knifemaking; Watson $12.95 

BK111 Shoeing the Draft Horse, Martin $7.95 

BK725 Shop Built Powerhammer; Peot $26.25 

BK994 Shop Drawings for Craftsman Inlays & Hardware, Lang $19.95 

BK776 Smiths’ Work; Hasluck $9.95 

BK829 Spirit of the Sword; Shacklefor $24.99 

BK591 Spruce Forge: Manual of Locksmithing, Morrison $25.00 

BK5 Steel and Tool Making Strategies and Techniques $22.00 

BK682 Strategies of Overcoming Long Toe; AFJ $6.95 

BK96 Success with Sharpening; Laughton $19.95 

BK993 Swedish Blacksmithing; Noren, Enander $53.00 

BK148 Techniques of Medieval Armour Reproduction $60.00 

BK445 Tinsmith’s Helper/Pattern Book; Vosburgh $13.50 

BK937 To Shoe or Not to Shoe, AFJ $9.95 

BK966 Tools and Trades of America’s Past, The Mercer Museum $9.95 

BK996 Tools Rare and Ingenious, Nagyszalanczy $37.00 

BK960 Tools that Built America, The, Bealer $13.95 

BK480 Treasury of Flower Designs, Gaber $7.95 

BK820 Universe of Metal Sculpture, A; Harvey $45.00 

BK742 VF Propane Forge Drawing, Williams $10.00 

BK832 Visual Guide to Blacksmithing; Bove $24.95 

BK473 Well; Shod; Baskins $17.95 

BK969 Welding Complete, Techniques, Project Plans & Inst. $24.99 

BK830 Wonder of Knifemaking, The; Goddard $27.99 

BK102 Wooden Iowa Rifling Bench, A, Bookout and Neubauer $20.00 

BK235 Work Methods of the Artist-Blacksmith; Schmirler $65.00 

BK786 Working with Precious Metal Clay, McCreight $30.00 

Farrier Invoices & Magazines 

INV9B Invoice Pad - Misgivings Design $9.15 123 

MAGAFJ 

Charts 

American Farriers Journal, Current Issue $8.00 123 

AC2 Anatomy Chart, Accute Founder; Horse Science $6.00 124 

AC1 Anatomy Chart, Normal; Horse Science $6.00 124 

WC14 Conformation Chart $29.00 124 

WC09 Dental Anatomy & Aging Chart $29.00 124 

WC05 Foot and Hoof Anatomy Chart $29.00 124 

WC02A Fore Limb Anatomy $29.00 124 

WC02B Hind Limb Anatomy $29.00 124 

WC17 Internal Hoof Anatomy & Biomechanical $15.00 124 

WC16 Navicular Syndrome $29.00 124 

Videos (Pages 125-130 Alphabetical by Title) 

DVD53 Armorer’s Workshop, The, Vol. 1 & 2 Set; Palladin $59.95 

DVD17 Artist Blacksmithing; Parkinson $66.00 

DVD13 Basic Blacksmithing-Part 1 by House $29.95 



DVD46 Basic Damascus Patterns featuring Mike Norris $39.00 

DVD8 Birds and Bugs; Epps $32.95 

DVD4 Blacksmith Primer; McDaniel $139.00 

DVD10 Broommaking for the Blacksmith; Mohr $29.95 

DVD3 Complete Metalsmith; McCreight $29.95 

DVD28 Damascus Blade from A to Z; Norris $39.00 

DVD67 Ed Fowler’s Knife Talk, Volume 1 $20.00 

DVD35 Fileworking; Dushane $40.00 

DVD38 Finishes/Metal Sculpture; Goehl $39.95 

DVD5 Fly Press, Crouchet $36.95 

DVD36 Forge Welding Cable & Striped Damascus; Osborn $45.00 

DVD6 Forged Animal Heads, Epps $32.95 

DVD49 Forging a Copper Rose; Har-lev $39.00 

DVD62 Forging a Flintlock Rifle Barrel; Laubach $24.95 

DVD66 Forging a Bearded Viking Axe; Austin $35.00 



Case Price 

Case Price 

Item# Description Qty U/M Price Pg Break Range Pg Item# Description Qty U/M Price Pg Break Range Pg 

DVD55 Forging Damascus: How to Create (2 DVD Set), Hrisoulas $29.95 125-130 

DVD50 Forging Solutions: Hand Forging; Har-lev $39.00 

DVD51 Forging Solutions: Power Hammer Vol 1; Har-lev $39.00 

DVD37 Forming Copper; Goehl $39.95 

DVD52 Free Form Forging; Hofi $39.00 

DVD47 Getting Started With Metal Sculpture; Goehl $39.95 

CD797 Hot Shop II; Chapman (Book on CD) $10.95 

DVD29 Introduction To Knife Engraving, An; Cover $45.00 

DVD45 Joinery Techniques; Har-lev $39.00 

DVD57 Katana - A Modern Craftsman’s Guide to Making $49.95 

DVD9 Leaves and Flowers; Epps $39.95 

DVD58 Loveless Legend, How to Make Custom Knives $19.95 

DVD30 Making a D-Guard Bowie; Dean $45.00 

DVD59 Making Do: Volume 1, The Poor Man’s Forge $39.95 

DVD7 Making Tongs; Epps $32.95 

DVD32 Mosaic Damascus; Caffrey $45.00 

DVD63 Natural Balance Hoof Trimming; Ovincek 2 DVD/SE $50.00 

DVD64 Natural Balance Shoeing; Ovincek 2 DVD/SET $70.00 

DVD43 POWER Repousse; Chapman $39.00 

DVD42 POWER Repousse and Chasing; Chapman $39.00 

DVD31 Quillion of Quality, The; Anders $45.00 

DVD41 Repousse; Chapman $39.00 

DVD61 Rifling a Gun Barrel, Bookout $19.95 

DVD60 Scripture Damascus, Rybar $40.00 

DVD44 Tools and Techniques, Har-lev $39.00 

DVD48 Trees, Trees, Trees; Goehl $39.95 

DVD68 Wire Damascus Hunting Knife, The; Goddard $32.00 

Notes: 

Try a pair of 

Pieh Hoof Nippers, today! 

We Guarantee your Satisfaction! 

See Page 32 

Notes: 


153

TERMS AND CONDITIONS 

SPECIAL NOTICE 

Due to the fluctuating international currency market, the prices 

of items from overseas may vary from the price shown in our 

price list. Please contact us to confirm the actual cost if you are 

concerned. We can notify you by price quote before shipping. 

Raw material prices are also fluctuating causing unpredictable 

price increases. Prices in this catalog are subject to change 

without notice. We charge your credit card at time of shipping.* 

SHIPPING QUOTES 

Please note that the shipping rates are weight-based. Shipping 

and handling charges will be added at the time your order is 

processed. We are always happy to quote shipping for you. 

Feel free to email or call us anytime! Quotes are valid for 15 

days. 

ORDERING 

You may order by phone, fax, mail or from our secure website 

catalog at www.piehtoolco.com. Call 888-743-4866 (in USA), 

928-554-0700, or fax us at 928-554-0800. (Please do not order 

by email to protect your personal financial information.) Once 

you place an order with us you will be added to our mailing list 

and assigned a 5 digit customer number. To expedite future 

orders, please use your customer number when ordering. Your 

customer number appears above your name on your invoice. 

Minimum Credit Card ORDER SIZE: $10.00 

PAYMENT (USA) 

We accept MasterCard, VISA, American Express, Pay Pal, 

Personal Checks, Money Orders/Cashier Checks in US funds. 

Please see the "Overseas Shipping/Payment Policies" section. 

We do not accept COD’s. 

There will be a $40 charge on all returned checks/credit card 

transactions. These fees must be paid before any future 

shipments will be processed. 

BACK-ORDER POLICY 

Most merchandise is in stock for immediate shipment. Orders 

are processed same day before 3 p.m. MT. If we should be out 

of stock on an item, we will back-order that item and ship the 

remainder of your order. If you prefer "no back-orders", please 

let us know. We do charge shipping/handling on back-orders. 

SPECIAL ORDERS* 

All Special Order items must be prepaid. There will be no 

returns on special orders unless the item was sent in error or 

was defective. 

RETURNS 

Please do not return any merchandise without prior 

authorization. Returns must include a Returned Merchandise 

Authorization number. (RMA) Authorized returns may be 

subject to a 20% restocking charge. It may be waved if a store 

credit is taken instead of a refund. 

If you refuse any shipment (including being unavailable for 

the delivery company) without prior approval from Pieh Tool 

Company, Inc., you will be charged a 25% restocking charge, 

as well as, the freight charges incurred. 

There are no returns allowed after 15 days. Absolutely no 

returns on Books, Video Tapes or DVD’s unless it is defective 

or was sent in error. 

DAMAGED/MISSING GOODS 

Please inspect your order when delivered. Report any damages 

or missing items within 2 days. Delay will affect your credit. 

Please keep all damaged containers for inspection. We will 

place the claim with the shipping company. Also, please check 

your packing slip to verify we have not back-ordered an item 

you might think is missing. 

DAMAGED/MISSING GOODS (continued) 

For Truck Shipments 

If you notice damaged or missing merchandise while the driver 

is still present. 

If you discover the damage/loss after the driver is gone, call 

the carrier immediately to explain what your inspection 

revealed and then notify our Customer Service Department. 

SHIPPING POLICIES IN THE USA 

All items weighing 150 pounds or less will be shipped via UPS 

Ground Service unless otherwise specified. Items weighing 

over the limits will be shipped by motor freight. 

*Hawaii/Alaska ships USPS 

UPS SHIPMENTS 

Delivery is between one and five days depending upon where 

you live. UPS (Ground Service) delivers Monday through 

Friday. UPS also offers Next Day Air, 2nd Day Air and 3 

Day Ground. Saturday deliveries have additional fees and is 

available only in certain areas. 

Oversized Packages 

Packages which are less than 30 pounds but greater than 84 

inches long are considered OVERSIZED. Packages which 

are less than 50 pounds but greater than 108 inches are also 

considered OVERSIZED and additional fees will apply. 

Handling Charges 

We do not charge handling for UPS shipments. A $5.25 

charge is added only for each US Mail package. After adding 

insurance/tracking and signature, UPS is usually more 

economical and reliable. 

Delivery Location 

UPS cannot deliver to a post office box. Please be sure we get 

the proper delivery address, and indicate if it's a business or 

residential address. UPS charges more to residential (rural) 

addresses. We will ship residential if you do not specify. UPS 

charges an address correction fee. We will pass this fee on to 

you if you provide incorrect shipping details. 

COMMERCIAL TRUCK SHIPMENTS 

Freight charges are prepaid and added to your invoice. Please 

let us know if you do not have access to a fork-lift. Accessorial 

charges, such as residential delivery and a lift gate fees, may 

be incurred. 

Insurance/Handling 

All shipments are insured. Palletizing Fee: $15 each 

SHIPPING/PAYMENT POLICIES 

(OUTSIDE USA, IN HAWAII AND ALASKA) 

Payment 

We accept Wire Transfers, VISA, MasterCard, American 

Express, Pay Pal; and US money orders at our discretion. All 

bank transfer charges, Duty and Taxes are your responsibility. 

Shipping Parcels 

We require that all packages be insured. By default we will 

ship US Priority Mail outside the continental USA. 

Handling Charges 

There is a $7.00 handling charge to ship US Mail overseas 

parcels. 

Freight 

Please specify if you would like us to ship Air Freight or Ocean 

Freight. We require that all packages be insured. Additional 

handling and crating charges may apply. 

By ordering from this catalog you are agreeing 

to the terms and conditions set forth. 


MAILING ADDRESS (Must match Credit Card Address) 

Name ________________________________________________________________________________________ 

Mailing Address ___________________________________________________________________________ 

City ______________________________________ State _________ Zip ______________________________ 

Province _________________________________ Country ________________________________________ 

E-mail _______________________________________________________________________________________ 

Phone __________________________________________ Fax ______________________________________ 

Alternate Phone Number ________________________________________________________________ 

We ship UPS Ground Residential, unless requested otherwise. 

We require that all packages be insured. 

� � Residential 

Business 

SHIPPING ADDRESS 

� UPS 3rd Party, Account # _____________________________________ � Don’t Require Signature 

For Overseas choose: Global Express, Priority Mail, Ocean Freight, Air Freight. Circle One 

Shipping options within the Continental North America: 

� UPS Ground � Overnight Standard � 2 nd Day � 3 rd Day � Saturday Delivery 

For your convenience, please check: 

PIEH TOOL COMPANY, INC. 

661 E. Howards Rd., Suite J � Camp Verde, AZ 86322 

Phone: 928-554-0700 � FAX: 928-554-0800 

1-888-PIEH TOOL (743-4866) 

E-mail: piehtoolsales@piehtoolco.com 

� Back Orders OK � No back Orders, I will reorder. 

So we may serve you better, please check all that apply: 

� Blacksmith � Jeweler � Horsesowner 

� Fabricator � Gunsmith � Farrier 

� Whitesmith � Knifemaker � Veterinarian 

� Welding/Repair Shop � School Instructor � Tack Shop 

ORDER FORM 

Date _________________________________________________ 

Customer Number _______________________________ 

Shipping To ____________________________________________________________________________ 

Name ____________________________________________________________________________________ 

Address _________________________________________________________________________________ 

City ____________________________________ State _________ Zip ___________________________ 

Province _______________________________ Country _____________________________________ 


QUANTITY ITEM NUMBER DESCRIPTION U/M UNIT PRICE TOTAL 

Please clip and mail, Fax, or scan and send to our E-mail address. 

You may call for a quote! 

Subtotal 

($10 Minimum Order) 

Tax (AZ 9.35%) 

Shipping* 

Handling Charges/Truck* 

($15 per pallet) 

Handling/US MAIL 

($5.25 per package) 

Handling/Overseas* 

($7 per package) 

TOTAL 

By ordering from Pieh Tool you are agreeing to the Terms and 

Conditions set forth on our website or in our catalog. (see page 154). 

If you need assistance please contact Pieh Tool by phone or E-mail. 

*Shipping/Handling Charges and Sales Tax (AZ only) will be applied 

to your order total when processed. Please see page 154 for Wires, 

International and Motor Freight Handling Charges. 

*You must provide your E-mail address for Pay Pal 

Payment in the form of: � Check � Credit Card � Money Order � Wire Transfer (outside US) � Pay Pal 

For Visa, AMEX & MasterCard: Card Number __________________________________________ Expiration Date ________________________________ 

(Last 3 digits on reverse side of card 

Signature __________________________________________________________________________________________ CVN# 

American Express: 4 digits on front)

Abrasives (Also see Polishing Rouges) 

Belts ........................................................ 70 

Buffing Wheels ......................................... 68 

Grinding/Sanding Discs ............................ 68 

Grinding/Deburring Wheels ....................... 70 

Wire Wheels/Wheel Brushes ..................... 68 

Air Hammer and Dies 

Air Hammer Dies ................................. 75-76 

Sahinler Power Hammer ........................... 74 

Anatomy Charts (Equine) ...................... 124 

Anti-Fungal/Disease Remedies ........21, 26 

Antiseptics & First Aid .......................... 26 

Anvil Stands ........................................ 42-43 

Anvils 

Blacksmith, Farrier .............................. 40-42 

Silversmith & Jewelers ...................41, 50-51 

Aprons (Farrier & Blacksmith) ...........28-29, 37 

Babbitting Supplies ................................ 81 

Band Saws .......................................63,66,72 

Bees Wax .................................................. 60 

Belt Sanders ............................................ 71 

Bender, Hydraulic Pipe .......................... 71 

Bending Forks, Saddles ......................... 53 

Blacksmith Classes .............39, Back Cover 

Blacksmith Kits ....................................... 90 

Books 

Armor ......................................................114 

Blacksmithing-Decorative/Sculpture ......101-106 

Blacksmithing-Techniques/Projects ..........95-100 

Design & Style ........................................117 

Foundry/Metallurgy ...........................108-109 

Horse Care ............................................ 122 

Horseshoeing ...................................120-121 

Jewelry & PMC ................................. 115-116 

Knifemaking ........................................ 92-94 

Oxen & Mules ........................................ 123 

Patinas & Finishes ................................. 107 

Shop Equipment ............................... 110-111 

Raising, Repousse ........................... 112-114 

Trades & Crafts ................................ 118-119 

Borium (Carbraze) Sticks ...................... 81 

Brazing Flux ............................................. 81 

Brushes, Wire .......................................... 57 

C-Clamps ................................................... 62 

Chasing Tools .......................................... 55 

Chisels .................................................35, 53 

Chop Saw, Jig Saw ............................63, 66 

Clinch Blocks ........................................... 35 

Clinch Cutters ......................................... 35 

Clinchers & Rebuilds ........................ 34-35 

Clip Starter .............................................. 36 

Clothing, Suspenders ............................. 91 

Coal & Coke ............................................. 80 

Crease Nail Pullers & Rebuilds............ 33 

Creasers (Fullers) ................................... 36 

Crucibles & Tongs .................................. 88 

Dewormers ............................................... 27 

Drill Bits.................................................... 69 

Drill Presses ............................................ 72 

Ear Plugs .................................................. 38 

Farrier Trimming Kit .............................. 32 

Feed Supplements .................................. 27 

Files & Handles .................................. 31-32 

Flatters ..................................................... 54 

Fly Presses & Tooling, Stand .......... 78-79 

Fly Spray, Masks, Insecticides ............ 26 

Forepunches ............................................ 36 

Forges-Coal & Coke ................................ 80 

Electric Blowers ....................................... 80 

Air Gates/Fire Pot/Hood/Tuyere ................ 80 

Forges-Gas 

Blacksmith Forges ............................... 82-85 

Farrier Forges ..................................... 86-87 

Knifemaker Forges .................................. 82 

Forge-Gas Accessories 

Parts-Fittings, Gauges, Hoses ......80, 82-83, 87 

Reliner Kits ....................................83, 86-87 

Fullers 

Fuller Punches & Sets .............................. 54 

Fullers (Creasers) .................................... 36 

Fullers (Top and Bottom) .......................... 54 

Guillotine Fullers ...................................... 76 

Furnaces-Industrial 

Casting Furnaces ..................................... 89 

Crucible Furnaces .................................... 88 

Furnace Forges ........................................ 85 

Glue-On Shoe Adhesives .................. 21-22 

Gift Certificates ...........................3, 15, 124 

Gloves (Kevlar, Cotton) .............................. 38 

Gouges ...................................................... 35 

Grease Gun .............................................. 67 

Grinders, Buffers .........................64, 67, 71 

Hammer Handles & Accesories .......... 48 

Hammers (Also see Mallets) 

Ball Pein .............................................44, 45 

Brass/Copper/Goldsmith ........................... 47 

Chasing & Repousse ................................ 49 

Cross Pein ..........................................44, 45 

Diagonal Pein ........................................... 44 

Driving, Farrier ......................................... 46 

Embossing ............................................... 49 

Ergonomic ................................................ 44 

Lapidary ................................................... 47 

Planishing ................................................ 49 

Raising .................................................... 49 

Rounding ............................................44, 45 

Set Hammers ........................................... 54 

Sledges.................................................... 46 

Split-Head (Rawhide) ............................... 46 

Straight Pein .......................................44, 45 

Hardies.................................................35, 53 

Hardener (Surface) .................................... 81 

Hats, Hat Racks ...................................... 91 

Heat Gun ................................................... 67 

Hoof Dressings ........................................ 24 

Hoof Gauges ............................................ 34 

Hoof Hardeners & Sealants .................. 24 

Hoof Knives ............................................. 30 

Hoof Moisturizers ................................... 24 

Hoof Nippers and Rebuilds .............. 32-33 

Hoof Packing ........................................... 23 

Hoof Pads (Also see Pad Cutter) 

Bar .......................................................... 19 

Draft ........................................................ 18 

Egg Bar ................................................... 19 

Flat .......................................................... 18 

Hospital ................................................... 20 

Leather .................................................... 18 

Lily .......................................................... 20 

Magnetic .................................................. 20 

Pour ......................................................... 19 

Rim .......................................................... 17 

Snow ....................................................... 20 

Styrofoam ................................................ 20 

Therapeutic .............................................. 20 

Thera Flex ............................................... 19 

Wedge ..................................................... 17 

Hoof Picks ...........................................30, 34 

Hoof Repair & Reconstruction ........ 21-22 

Hoof Stands ............................................. 15 

Hoof Testers ............................................ 34 

Horse Boots ............................................. 16 

Horse Polishes, Coat Detangler ........... 25 

Horseshoe Nails ..................................... 1-3 

Horseshoes-Aluminum 

Denoix ..................................................... 12 

Egg Bar ................................................... 14 

Navicular.................................................. 14 

Racing Plates ........................................... 14 

Therapeutic (Natural Balance) .................. 12 

Wide Web ................................................ 13 

Horseshoes-Rubber .................................11 

Horseshoes-Steel 

Concave.................................................. 6-7 

Draft ........................................................ 10 

Egg Bars .................................................... 9 

Equi-Librium ............................................... 8 

Mule .......................................................... 7 

Plain .......................................................... 4 

Pony .......................................................... 7 

Rim ............................................................ 8 

Sliding Plates ........................................... 10 

Tennessee Walking (Toe Weight) ................ 7 

Therapeutic (Navicular & Natural Balance) .. 9 

Toed & Heeled, Heeled ............................... 6 

Training Plates ........................................... 8 

Wide Web .................................................. 5 

Ingots ........................................................ 81 

Invoice Pad (Farrier) ............................... 123 

Jewelry ..................................................... 91 

Kao-Wool (Forge Lining) ............................ 80 

Knife Sharpeners (Also see Abrasives) .... 61 

Lag Bolts .................................................. 59 

Liniments .................................................. 25 

Lubricant (Grease Stick) ........................... 70 

Magazines .............................................. 123 

Magnets, Organizers, Welding ........ 61-62 

Mallets (Hickory, Rawhide, UHMB) ........46, 49 

INDEX 

Mandrel Cones ......................................... 53 

Metal Forming Stakes, Tools ........... 50-52 

Metal Marking (Pencils, Soapstone) ......... 62 

Nail Headers ............................................ 76 

Nail Nippers ............................................. 32 

Order Forms ........................................... 155 

Pad Cutter ................................................ 18 

Palm Nailer .............................................. 67 

Patinas & Gilders Paste ....................... 60 

Pitch Bowls & Pitch ............................... 55 

Pliers, Wrenches ................................56, 62 

Polishing Rouges & Waxes 

Renaissance Wax & Bees Wax ................. 60 

Rouges (for Grinding Wheels) ................... 70 

Poultices ................................................... 25 

Power Tools (Corded, Cordless) 

Angle Grinders, Polisher ......................64, 67 

Combo Kits .............................................. 66 

Die Grinders, Multi-Tools .....................64, 67 

Drills, Impact Drivers ........................... 64-66 

Saws ...................................................63, 66 

Shears ................................................64, 67 

Tubing Cutter ........................................... 67 

Power Tool Accessories ............................ 

Bandsaw Blades ....................................... 69 

Drills Bits ................................................. 69 

Wire Wheels, Sanding Discs ..................... 68 

Sawzall Blades ...................................... 70 

Primers, Sealers ..................................... 60 

Pritchels ................................................... 35 

Pull-Offs .................................................... 33 

Punches 

Ball Punches ............................................ 54 

Center Punches...................................35, 54 

Drift Punches ........................................... 54 

Eye Punches ............................................ 54 

Fullering Punches..................................... 54 

Round Punches (Handled) ........................ 54 

Power Hammer Set .................................. 76 

Puzzles - Tavern ...................................... 91 

Radio ......................................................... 67 

Rasp Handles/Holders ............................ 32 

Rasps (Hoof) .............................................. 31 

Refractory Cement ................................. 80 

Rivets, Burrs, Rivet Headers ........... 58-59 

Rose Blanks ............................................. 53 

Rulers .............................................32, 34, 62 

Safety Glasses ........................................ 38 

Saws ......................................... 63, 66, 70, 72 

Screws, Pyramid Head ........................... 58 

Scrolling Jigs/Wrenches ........................ 53 

Shears (Slitting & Foot) .............................. 73 

Sheet Metal Hand Brake ....................... 72 

Shoe Spreaders .................................. 33-34 

Shoeing Boxes ......................................... 15 

Smoosh-o-Matic (Side Butcher) ................ 53 

Squares, Protractors .............................. 62 

Stall Jacks ............................................... 42 

Stud Punches ........................................... 35 

Studs, Plugs ............................................... 3 

Swage Blocks ..................................... 51-52 

Swages & Texturing (Also see Air Hammers) 

Leaf Tools ................................................ 76 

Spring Swages ......................................... 76 

Top & Bottom ........................................... 54 

Temperature Laser Gun ......................... 67 

Terms and Conditions ...................... 154 

Tinning Compounds & Pastes .............. 81 

Tongs (Also see Pliers) .....................56-57, 88 

Treadle Hammer & Dies ........................ 77 

Tubing Cutters .....................................63,67 

Tooth Float & Twitch ............................. 34 

Utility Knives, Saws ............................... 63 

Vaccines ................................................... 26 

Vet Wrap ................................................... 16 

Videos 

Armor ..................................................... 125 

Blacksmithing ...................................125-127 

Chasing & Repousse .............................. 127 

Copper & Fold Forming ....................127-128 

Gunsmithing ........................................... 130 

Horseshoeing ......................................... 130 

Knifemaking .....................................128-130 

Vises .......................................................... 43 

Voltage Detector ..................................... 67 

Welding Fluxes ........................................ 81 

Wing Dividers ........................................... 34 

Wrenches .............................................53, 62 

1-888-743-4866 Pieh Tool Company, Inc.

Vol. 12-1 

•

Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool

Create successful ePaper yourself

Delete template?

Save as template?