Bio-Pure End Caps - Tri-Canada

End Caps
Bio Cap® Flat End Cap
Dimensional and Physical Properties
PERTAINING TO BIO CAP ONLY
Size Part Number Dim “A” Dim “B” (d)
Bio Cap
.5–.75” PPCAP075-T .985” 1.182”
1–1.5” PPCAP150-T 1.989” 1.182”
Flat End Cap
.5–.75” (PP, PVDF) CAP075 .992” .188”
1–1.5” (PP, PVDF) CAP150 1.984” .240”
2” (PP, PVDF) CAP200 2.516” .240”
2.5” (PP, PVDF) CAP250 3.047” .240”
3” (PP, PVDF) CAP300 3.579” .240”
4” (PP, PVDF) CAP400 4.682” .240”
6” (PP, PVDF) CAP600 6.57” .480”
Maximum
Recommended
Working
Resin Data Tensile Strength Flexural Modulus Hardness Heat Deflection Water Absorption Temperature F°
Polypropylene used 29.5 Mpa 1100 Mpa 94, R-scale, 90° C @ .45 Mpa 180° F
in Bio Cap (50mm/min) (1mm/min) Rockwell ISO 75-2
ISO 527-2 ISO 527-2 ISO 2039-2
Polypropylene used 3900 psi 160000 psi 80, R-scale, 87.8° F @ 66 psi .01% 180° F
Flat End Cap (2 in/min) ASTM D 790 Rockwell ASTM D 648 (24 hour duration)
ASTM D 638 ASTM D-785
PVDF used 5000–7000 psi 240000–335000 psi 76–80 257–284° F .01–.03% 240° F
in Flat End Cap ASTM D 638 ASTM D 790 Shore D @ 66 psi (24 hour duration)
ASTM D 2240 ASTM D 648
Physical properties provided as general guidelines only. It is the end-users responsibility to ensure that the above mentioned products
are compatible with the intended application and that the products are in compliance with all applicable regulatory requirements for
use. User assumes all risk of usage.
For additional information please contact:
17 South Street, Havant, Hampshire, UK, PO9 1BU.
Tel: +44 (0) 2392 499000 Fax: +44 (0) 2392 499001
www.biopuretech.com
G-25_4-07