d en-drv gb - Watts Industries
d en-drv gb - Watts Industries
d en-drv gb - Watts Industries
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PREssuRE REDuciNg VAlVE • EN-DRV<br />
- Outlet pressure indicator:<br />
The pressure reducing valve EN-DRV is equipped with<br />
an outlet pressure indicator (see fig. 1) that displays the<br />
set pressure. These 2 set point scales are located on<br />
each side of the valve, so that the pressure indicator is<br />
always visible.<br />
As a result, an additional pressure gauge is not fully<br />
necessary.<br />
Figure 1<br />
Preadjustem<strong>en</strong>t<br />
3<br />
- European standard EN 1567:<br />
The EN-DRV pressure reducers fully comply with the<br />
requirem<strong>en</strong>ts of the new European Standard EN1567.<br />
EN 1567<br />
- Acoustic performances:<br />
Low noise approved Up to size 1”1/4 - Group 1 without limitations<br />
- The modular cartridge construction:<br />
• complete cartridge with diaphragm and valve seat<br />
• fine filter mesh 0,71 mm<br />
• high quality synthetic material<br />
• can be fully exchanged without using special tools<br />
• all synthetic parts getting in contact with water are<br />
approved and made in non-stick materials<br />
• this minimizes the limescale deposit<br />
- Wide product range:<br />
The product range is split into three distinct categories :<br />
• EN-DRV: pre-adjustable reducer, with pressure gauge connection, and fine filter on the cartridge (mesh size 0,71mm).<br />
• EN-DRV/R: features similar to EN-DRV but with a brass cap (without set point scale).<br />
• EN-DRV/F: features similar to EN-DRV but with an inspectable filter of high capacity inside a synthetic clear bowl.<br />
Filter in stainless steel, mesh size 0,28mm.<br />
EN-DRV<br />
EN-DRV/R<br />
brass cap (without outlet<br />
pressure indicator)<br />
EN-DRV/F<br />
inspectable filter<br />
of high capacity