Clemtex Parts Catalog

More documents

Recommendations

Info

) nd by the o. 53 57 55 56 58 59 51 61 62 54 63 65 66 31 67 68 69 70 71 87 74 (48) (47) (48) CLEMTEX 4.4 Blast Nozzle. Inspect the blast nozzle regularly and replace it when worn out. The blast nozzle can be removed Page 3 4.4 Blast Nozzle. Inspect the blast nozzle regularly and by replace loosening it when the thumb worn out. screw The on blast the blast nozzle head. can Never be removed tighten by the loosening thumb screw the thumb more than screw finger on the tight. blast head. Never tighten the thumb 4.4 screw Blast more Nozzle. than finger Inspect tight. the blast nozzle regularly and replace it when worn (44) out. The blast nozzle can be removed by 5.0 loosening ATTACHMENTS the thumb screw on (FIGURE the blast 5). head. Never tighten the (42,43) 5.0 thumb screw ATTACHMENTS more than finger (FIGURE tight. 5). Item Description Stock No. Item Attachment Description set (includes (45) all items listed below) Stock .... 00753 No. Master 5.0 adaptor ATTACHMENTS Attachment set (includes (must (22 Complete be all purchased Bag) (FIGURE with 5). items listed below) any of .... 00753 Master the four adaptor adaptors (must listed be (30) purchased below) ........................... with any of 00757 Edge Item the four attachment Description(outside corners) (26) adaptors listed below) ........................... ....................... Stock 00757 00755 No. (27) Edge Serrated Attachment attachment attachment set (includes (outside (rough corners) all surfaces) items (28) ....................... listed ................... below) 00755 00756 00753 Serrated Angle Master attachment adaptor attachment (must (inside (rough be corners) purchased surfaces) ......................... with any of 00756 00758 Angle Flat the (16) lip attachment four attachment adaptors (29) (inside (smooth listed corners) below) surfaces) ......................... ........................... 00759 (31) (34) 00758 00757 Flat Edge (6) lip attachment attachment (smooth (outside surfaces) corners) ....................... (33) ................... 00759 00755 (32) 5.1 Serrated Replacement attachment (rough Parts (figure surfaces) 5). ................... (36) 00756 Angle 5.1 (11) attachment (inside corners) ......................... (35) 00758 Replacement Parts (figure 5). Replacement (-) Flat Educt-O-Matic lip attachment Parts (smooth complete surfaces) ................................ (37) 00751 00759 (-) 1. (18) (40) Educt-O-Matic Blast head Adaptor ...................................................... complete Boots ................................ 00751 00761 1. 5.1 2. (19) Blast Standard (17) Replacement head adaptor ...................................................... ........................................... Parts (figure (39) 5). (38) 00761 00762 2. 3. Standard Nozzle, 3 / adaptor 8 ", tungsten ........................................... carbide ........................ (41) 00762 00754 (20) 3. (-) 4. Nozzle, Nozzle, Educt-O-Matic Master 3 / 8 ", steel............................................ 00763 5. jet / Adaptor .......................................................... 8 ", tungsten complete carbide ........................ 00754 00751 4. 1. Nozzle, Blast head 00765 6. Jet gasket,.675 / 8 ", steel............................................ 00763 00761 5. 2. Blast Standard jet .......................................................... adaptor O.D. x .475 I.D. 00765 00766 6. 7. Jet Thumb gasket,.675 screw, 1 Level ........................................... Surface 00762 Inside Corners 3. Nozzle, 3 / 8 ", tungsten O.D. / 4 " NC x .475 x carbide 1" ............................. I.D. .................... 00766 03131 00754 7. 8. 4. Thumb Blast Nozzle, head screw, / nipple, 3 8 ", steel............................................ / 8 " x 4" 00767 9. Swivel connector............................................ / 4 " NC x 1" 03131 00763 (21) 8. 5. Blast Blast head jet .......................................................... nipple, 00768 10. O-ring ............................................................. / 8 " x 4" ............................. 00767 00765 9. 6. Swivel Jet gasket,.675 connector............................................ O.D. x .475 I.D. 00768 00769 00766 Rough Surfaces Outside Corners 10. 11. 7. O-ring Main Thumb body ............................................................. screw, ...................................................... / 4 " NC x 1" 00769 00770 03131 11. 12. 8. Main Abrasive Blast body head hose ...................................................... nipple, ................................................ / 8 " x 4" Figure 00770 00771 00767 5 Educt-O-Matic 12. 13. 9. Abrasive Thumb Swivel screw,10-24 connector............................................ hose Attachments ................................................ x 1 / and 2 " Replacement Parts 00771 03887 00768 13. 14. 10. Thumb Ferrule............................................................ O-ring screw,10-24 ............................................................. x 1 / 00774 2 " 03887 00769 14. 11. Ferrule............................................................ Main body ...................................................... 00774 00770 15. 12. Air Abrasive hose assy hose (includes ................................................ ferrule) 00775 00771 16. 13. Suction Thumb jet screw,10-24 ...................................................... x 1 / 2 " 00776 03887 17. 14. Baffle Ferrule............................................................ assembly 00778 00774 18. Baffle (plastic only) ................................ See 00778 19. Screen.................................................... See 00778 20. Screen gasket ........................................ See 00778 21. Abrasive container ......................................... 00814 (24) 22. Dust bag......................................................... 00785 (13) 23. Exhaust tube includes wire form ................... 00784 24. Valve body ..................................................... (14) (15) 00789 (25) 25. O-ring ............................................................. 00786 (46) 26. Valve bushing ................................................ (10) 00792 (8) 27. Valve bushing gasket .................................... 00793 28. O-ring ............................................................. 00794 29. Washer........................................................... 00795 30. Retaining ring ................................................. 00796 31. Spring, 1 1/2" long ......................................... 00797 32. Valve stem (7) (1) ..................................................... 00798 33. Washer, 13/16" O.D. x 1/8" ........................... 00799 (6) 34. Washer, brass, .80 O.D. x 1/8" ...................... 00800 (5) 35. Hex nut, 10-32 ............................................... 03885 36. Washer, brass, 9/16" O.D. (3, 4) x 3/64" ................ (12) 00802 37. Spring, 1-1/4" long ......................................... 00803 38. Washer, 9/16" O.D. x 5/32" (2) ........................... 00804 39. Eyelet, brass .................................................. (47) 00805 40. Washer, brass, 1/2" O.D. x 1/32"................... 00806 41. Retaining ring ................................................. 00807 42. Nipple and grip assy. ..................................... (48) 00810 43. Pipe nipple, aluminum, 6" long ...................... 00808 44. Molded handle grip ........................................ 00812 45. Valve handle/yoke assy. ................................ 00811 46. Swivel nut/insert assy. ................................... 00815 Educt-O-Matic Rough Surfaces Outside Corners Rough Surfaces Outside Corners Figure 5 Educt-O-Matic (21) Attachments and Replacement Figure Parts 5 Educt-O-Matic Attachments Rough Surfaces and Replacement Parts Outside Houston Corners Office 248 McCarty Dr. Figure 5 P.O. Box 15214 Houston, TX 77220-5214 (713) 672-8251 Fax (713) 672-6336 15. Air hose assy (includes ferrule) ..................... 00775 Educt-O-Matic 16. Suction jet Attachments ...................................................... and Replacement Parts 15. Air hose assy (includes ferrule) 00775 00776 16. 17. Suction Baffle assembly jet ...................................................... 00776 00778 17. 18. Baffle Baffle assembly (plastic only) ............................................. See 00778 00778 18. 19. 15. Baffle Screen.................................................... Air hose (plastic assy only) (includes ferrule) ..................... See See 00778 00778 00775 19. 20. 16. Screen.................................................... Suction gasket jet ...................................................... See See 00778 00778 00776 20. 21. 17. Screen Abrasive Baffle gasket assembly container ........................................ ............................................. See 00778 00814 00778 21. 22. 18. Abrasive Dust Baffle bag......................................................... (plastic container only) See 00814 00785 00778 22. 23. 19. Dust Exhaust Screen.................................................... bag......................................................... tube includes wire form See 00785 00784 00778 23. 24. 20. Exhaust Valve Screen body tube gasket ..................................................... includes wire form See 00784 00789 00778 24. 25. 21. Valve O-ring Abrasive body ............................................................. container 00789 00786 00814 25. 26. 22. O-ring Valve Dust ............................................................. bag......................................................... bushing 00786 00792 00785 26. 27. 23. Valve Valve Exhaust bushing bushing tube ................................................ includes gasket .................................... wire form 00792 00793 00784 27. 28. 24. Valve O-ring Valve bushing ............................................................. body gasket .................................... 00793 00794 00789 28. 29. 25. O-ring Washer........................................................... O-ring ............................................................. ............................................................. 00794 00795 00786 29. 30. 26. Washer........................................................... Retaining Valve bushing ring ................................................. 00795 00796 00792 30. 31. 27. Retaining Spring, Valve bushing 1 ring 1/2" ................................................. long gasket ......................................... 00796 00797 00793 31. 32. 28. Spring, Valve O-ring stem 1 ............................................................. 1/2" long ......................................... 00797 00798 00794 32. 33. 29. Valve Washer, Washer........................................................... stem 13/16" ..................................................... O.D. x 1/8" 00798 00799 00795 33. 34. 30. Washer, Washer, Retaining 13/16" brass, ring ................................................. O.D. .80 O.D. x 1/8" x 1/8" ........................... 00799 00800 00796 34. 35. 31. Washer, Hex Spring, nut, brass, 110-32 1/2" .80 long ............................................... O.D. x 1/8" ...................... 00800 03885 00797 35. 36. 32. Hex Washer, Valve nut, stem 10-32 brass, ..................................................... ............................................... 9/16" O.D. x 3/64" 03885 00802 00798 36. 37. 33. Washer, Spring, Washer, 1-1/4" brass, 13/16" long 9/16" O.D. ......................................... O.D. x 1/8" 3/64" ................ 00802 00803 00799 37. 38. 34. Spring, Washer, 1-1/4" 9/16" brass, long O.D. .80 ......................................... x O.D. 5/32" x 1/8" ........................... 00803 00804 00800 38. 39. 35. Washer, Eyelet, Hex nut, brass 9/16" 10-32 .................................................. O.D. x 5/32" ........................... 00804 00805 03885 39. 40. 36. Eyelet, Washer, brass brass, .................................................. 1/2" 9/16" O.D. O.D. x 1/32"................... x 3/64" 00805 00806 00802 40. 41. 37. Washer, Retaining Spring, brass, 1-1/4" ring ................................................. 1/2" long O.D. x 1/32"................... 00806 00807 00803 41. 42. 38. Retaining Nipple Washer, and ring 9/16" grip ................................................. O.D. assy. x ..................................... 5/32" 00807 00810 00804 42. 43. 39. Nipple Pipe Eyelet, nipple, and brass grip aluminum, .................................................. assy. 6" long 00810 00808 00805 43. 44. 40. Pipe Molded Washer, nipple, handle brass, aluminum, grip 1/2" ........................................ O.D. 6" long x 1/32"................... ...................... 00808 00812 00806 44. 45. 41. Molded Valve Retaining handle/yoke handle ring grip ................................................. assy. 00812 00811 00807 45. 46. 42. Valve Swivel Nipple handle/yoke nut/insert and grip assy. assy. ..................................... ................................ 00811 00815 00810 46. 47. 43. Swivel Container Pipe nipple, nut/insert latch aluminum, hook assy. ...................................... ................................... 6" long 00815 00782 00808 47. 48. 44. Container Container Molded handle latch latch hook ............................................... grip ...................................... 00782 00781 00812 48. 49. 45. Container Exhaust Valve handle/yoke tube latch gasket ............................................... assy. (not ................................ shown) 00781 00846 00811 49. 46. Exhaust Swivel nut/insert tube gasket assy. (not................................... shown) 00846 00815 47. Container latch hook ...................................... 00782 48. Container latch ............................................... 00781 49. Exhaust tube gasket (not shown) .................. Page 3 00846 38 4.4 Blast Nozzle. Inspect the blast nozzle regularly “We and stock 15. Air the hose assy most (includes complete ferrule) ..................... line 00775 of Corrosion- 47. Container latch hook ...................................... 00782 48. Container latch ............................................... 00781 49. Exhaust tube gasket (not shown) .................. 00846 replace it when worn out. The blast nozzle can be removed by loosening the thumb screw on the blast head. Never tighten the thumb screw more than finger tight. (9) (48) (23) (16) (6) (11) (21) (18) (19) (20) (17) Master Adaptor (44) (45) (42,43) (22 Complete Bag) (29) (31) (32) Adaptor Boots (30) (26) (27) (28) Level Surface Rough Surfaces (34) (33) (36) (35) (37) (40) (39) (38) (41) Inside Corners Outside Corners Figure 5 Educt-O-Matic Attachments and Replacement Parts 16. Suction jet ...................................................... 00776 17. Baffle assembly ............................................. 00778 18. Baffle (plastic only) ................................ See 00778
Corpus Christi Branch SERVICE Dallas BULLETIN Branch Ref. No. 4 Optional 303 S/S Tip Needle 4750 Westway 4770 Gretna Ref. No. 5 Ref. No. 11 1-800-CLEMTEX P.O. Box 5036 Dallas, TX 75207 Corrosion Sprayhead U.H.M.W. Poly. Fluid Tip Control Fluid Needle SB-2-301-S Assy. Corpus Christi, TX 78465-5036 (214) 631-0584 No. on Tip 5 Ref. No. 39 SB-2-301-S www.clemtex.com SERVICE BULLETIN (361) 882-8282 Replaces Fax (214) SB-2-301-R 631-5824 Equipment and Supplies AV-2115-AC CHART ———— 3 MBC-496-C Fax (361) 882-6029 1-800-BLAST 97 SB-2-301-S AV-2115-D Fluid Tips P-MBC-430-D and Needles MBC-496-DEX AV-4915-D MBC-4397-D Replaces SB-2-301-R Repair Kit KK-4058-1AV-2115-E P-MBC-430-E MBC-444-E AV-4915-E MBC-4397-E Ref. No. 4 Optional 303 S/S Tip Needle Ref. No. 5 Ref. No. 11 AV-2115-EX P-MBC-430-EX Sprayhead MBC-496-DEX U.H.M.W. Poly. Fluid Tip Fluid Needle Assy. No. on Tip 5 Ref. No. 39 Repair Kit KK-4058-1 Paint AV-2115-FF Guns P-MBC-430-FF MBC-444-FF AV-4915-FF MBC-4397-FF -510 SPRAY GUN AV-2115-AC AV-2115-FX P-MBC-430-FX ———— MBC-496-C MBC-444-FX AV-2115-D P-MBC-430-D MBC-496-DEX AV-4915-D MBC-4397-D Note CHART 1 Devilbiss MBC-510 AV-2115-E P-MBC-430-E MBC-444-E AV-4915-E MBC-4397-E UN en replacing the fluid tip or fluid Nozzle Combinations AV-2115-EX (See P-MBC-430-EX image on MBC-496-DEX next page) dle, replace CHART both at 1the same time. Air Cap Sizes Fluid Tip and Needle Sizes Order PARTS LIST AV-2115-FF P-MBC-430-FF MBC-444-FF AV-4915-FF MBC-4397-FF ng worn parts can cause fluid Order From From Chart 3 AV-2115-FX P-MBC-430-FX MBC-444-FX fluid Nozzle Combinations Ref. Replacement Individual kage. For thinner, less viscous Chart 2 No. Part No. Description Parts Required terials ime. a lapped Air Cap tip Sizes and needle Fluid Tip set and Needle Sizes Order AC D E EX FF FX ecommended. fluid Order See From Chart From 3. Also, Chart 3 1 See Chart 2 Air Cap/Retaining Ring 1 24 P P P cous lace the needle Chart 2 packing at this 2 MBC-368 PARTS LIST Retaining Ring for Ref. No. 3 & 4 1 30 P S P P e e. set Lightly lubricate the AC threads D E EX FF FX 3 See Chart 58 P/S S P P Ref. 2 Replacement Air Cap Less Retaining Ring Individual 1 he lso, 4 See Chart No. 3 Part No. Sprayhead Description Assembly Parts 1 Required fluid tip 24 before reassembling. P P 62HD P P que this 5 See Chart 3 Fluid Tip 1 to 20-25 30 ft. lbs. Do not over P S 64HD P P P 1 See Chart 2 Air Cap/Retaining Ring 1 •6 AV-1-K5 Gasket Kit (Kit of 5) 1 eads ten the fluid 58 tip. P/S S P P 2 MBC-368 Retaining Ring for Ref. No. 3 & 4 1 69HD P 7 MBC-1225 ling. 3 See Chart Baffle 2 Air Cap Less Retaining Ring 1 1 62HD P 80 S 8 P-MBC-402 4 See Chart Sprayhead 3 Sprayhead Body Assembly 1 1 over 64HD P 704 P P •9 A-23-K10 5 See Chart Packing 3 Kit Fluid (Kit Tip of 10) 1 1 69HD P 765 P P P 10 MB-19-K5 •6 AV-1-K5 Packing Nut Gasket Kit (Kit (Kit of of 5) 5) 1 1 prevent damage 80 to the fluid tip (5) S 777 P P 11 See Chart 7 3 MBC-1225 Fluid Needle Baffle 1 1 uid needle 704 (11), be sure to either P 797 P P P • 12 JGA-14-K25 8 P-MBC-402 Snap ring Sprayhead Kit (Kit of Body 25) 1 1 pull the trigger 765 and hold while P 9000 P P S • 13 JGA-15-K25 •9 A-23-K10 Washer Kit Packing (Kit of Kit 25) (Kit of 10) 1 1 10 MB-19-K5 Packing Nut Kit (Kit of 5) 1 ip tening (5) or loosening 777 the fluid tip P P • 14 JGS-26-K25 U-Cup Kit (Kit of 25) 1 11 See Chart 3 Fluid Needle 1 2) ither remove fluid 797 needle adjusting • 15 JGS-431-K25 P P P • 12 JGA-14-K25 Air Valve Snap Kit (Kit ring of Kit 25) (Kit of 25) 1 1 - Pressure Feed Combination ew hile (32) to relieve 9000 spring pressure • 16 MBD-12-K25 S • 13 JGA-15-K25 Spring Kit Washer (Kit of Kit 25) (Kit of 25) 1 1 S - Suction Feed Combination d inst tip • 17 JGS-72-K10 • 14 JGS-26-K25 Gasket Kit U-Cup (Kit of Kit 10) (Kit of 25) 1 1 needle collar. 18 JGS-449-1 • 15 JGS-431-K25 Valve Assembly Air Valve Kit (Kit of 25) 1 1 ting P - Pressure Feed Combination • 19 MBC-1226-K10 • 16 MBD-12-K25 Gasket Kit Spring (Kit of Kit 10) (Kit of 25) 1 1 sure GUN LUBRICATION S - Suction Feed Combination 20 MBC-67 • 17 JGS-72-K10 Locking Bolt Gasket Kit (Kit of 10) 1 1 21 MBC-498-1 18 JGS-449-1 Fan Adjustment Valve Assembly Valve 1 1 pply two drops of •SSL-10 spray gun • 19 MBC-1226-K10 Gasket Kit (Kit of 10) 1 CHART 2 22 --- Washer 1 20 MBC-67 Locking Bolt 1 e Accessories) at trigger bearing stud • 23 --- 21 MBC-498-1 Packing Fan Adjustment Valve 1 1 d the stem of the air valve (15) where Air Caps 24 --- 22 --- Packing Nut Washer 1 1 s ay the gun air valve CHART assembly. 2 The shank No. on Ref. Nos. (1) Ref. No. (3) 25 --- • 23 --- Knob Packing 1 1 fluid ng stud needle (11) where it enters the Cap Air Cap Air Cap • 26 --- 24 --- Screw Packing Nut 1 1 ) where Air Caps Order with Ring Less Ring g nut (10) should also be oiled. The 27 MBC-415 25 --- Cylinder Knob Assembly 1 1 edle shank packing No. (9) on should be Ref. kept Nos. soft (1) Ref. 24 No. (3) AV-40-24 • 28 CV-5-K5 • 26 --- Gasket Kit Screw (Kit of 5) 1 1 iable ers the by periodic Cap lubrication. Air Cap Make Air 30 Cap MB-4039-30 29 --- 27 MBC-415 Cylinder Cylinder Assembly 1 1 • 28 CV-5-K5 Gasket Kit (Kit of 5) 1 Order with Ring Less 58 Ring AV-439-58 30 MBC-33 Plunger 1 e d. sprayhead The (8) and retaining ring (1 29 --- Cylinder 1 24 62HD AV-40-24 MB-4039-62HD • 31 MBC-29-K5 Spring (Kit of 5) 1 reads pt soft are clean and free of foreign 30 MBC-33 Plunger 1 30 MB-4039-30 64HD MB-4039-64HD 32 MBC-39 • 31 MBC-29-K5 Screw Spring (Kit of 5) 1 1 al. Make Before assembling retaining ring 58 AV-439-58 69HD MB-4039-69HD 33 P-MB-51 32 MBC-39 Air Inlet Adapter Screw 1/4" NPS 1 1 yhead, ring (1 clean the 62HD threads thoroughly, MB-4039-62HD 80 MB-4039-80 34 --- 33 P-MB-51 Trigger Bearing Air Inlet Stud Adapter 1/4" NPS 1 1 dd foreign two drops 64HD of SSL-10 MB-4039-64HD spray gun 704 AV-1239-704 •35 --- 34 --- Screw Trigger Bearing Stud 1 1 ng threads. ring The 69HD fluid needle MB-4039-69HD spring (31) 765 AV-1239-765 36 JGS-478 •35 --- Stud and Screw Kit 1 1 36 JGS-478 Stud and Screw Kit 1 ughly, valve spring (16) 80 should MB-4039-80 be coated 777 31767-777 (3 studs, 5 screws in kit) (3 studs, 5 screws in kit) ay very gun light grease, 704 making sure that AV-1239-704 797 AV-1239-797 37 JGS-477-1 Trigger, Stud and Screw Kit 1 37 JGS-477-1 Trigger, Stud and Screw Kit 1 ing cess (31) grease will 765 not clog the air pas- AV-1239-765 9000 AV-440-9000 SB-2-301-S Page (Kit 3includes (Kit includes 1 each) 1 each) coated For best results, 777 lubricate the points 31767-777 #38 P-MBC-428-3 #38 P-MBC-428-3 Spray gun Spray less gun spray less head spray head 1 1 ed, re that daily. CHART 797 3 AV-1239-797 • A quantity • of A quantity necessary of necessary parts is included parts is included repair in kit repair KK-4058-1 kit KK-4058-1 for for air paspoints Safety Data Fluid Sheet Tips available and Needles from nience. nience. 9000 AV-440-9000 complete gun complete repair gun and repair should and be should kept be on kept hand on for hand service for service conve- conve- ial iss upon request. Ref. No. 4 Optional 303 S/S Tip # Needle # Ref. No. 38 includes Ref. Nos. 12-37. Ref. No. 38 includes Ref. Nos. 12-37. Ref. No. 5 Ref. No. 11 Sprayhead U.H.M.W. Poly. Suffixes -K5 and -K10 designates kits of multiple parts. le igger from PointsFluid Tip Fluid Needle Suffixes -K5 Example: and -K10 AV-1-K5 designates is a kit kits of 5 of gaskets. multiple parts. Assy. cking No. on Tip 5 Ref. No. Example: 39 AV-1-K5 is a kit of 5 gaskets. justing Valves AV-2115-AC A ———— MBC-496-C reads D AV-2115-D P-MBC-430-D MBC-496-DEX AV-4915-D MBC-4397-D D AV-2115-E P-MBC-430-E MBC-444-E AV-4915-E MBC-4397-E AV-2115-EX P-MBC-430-EX MBC-496-DEX AV-2115-FF P-MBC-430-FF MBC-444-FF AV-4915-FF MBC-4397-FF AV-2115-FXB P-MBC-430-FX MBC-444-FX CHART 3 Fluid Tips and Needles A PARTS LIST Control Equipment and Supplies in the Southwest.” 39 Ref. Replacement Individual No. Part No. Description Parts Required
Page 1 and 2: CLEMTEX Corrosion Control Equipment
Page 3 and 4: ! 1-800-CLEMTEX www.clemtex.com Cor
Page 5 and 6: 1-800-CLEMTEX www.clemtex.com Corpu
Page 13 and 14: Corpus Christi Branch 4750 Westway
Page 21 and 22: SENTINEL MEDIA METERING VALVE Page
Page 33 and 34: ! Users detect any objectionable od
Page 39: 1-800-CLEMTEX www.clemtex.com Corpu
Page 45 and 46: 1-800-CLEMTEX www.clemtex.com JGA-5
Page 49 and 50: 1-800-CLEMTEX www.clemtex.com will

Clemtex Parts Catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?